From 10c71fd1c688d92ed0ca12dbb7e7069d9a2d451f Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Thu, 29 Aug 2019 22:03:39 +0200 Subject: arm64: dts: qcom: qcs404: add sleep clk fixed rate oscillator This fixed rate clock is required for the operation of some devices (ie watchdog). Reviewed-by: Stephen Boyd Signed-off-by: Jorge Ramirez-Ortiz Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index a97eeb4569c0..131d8046d3be 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -22,6 +22,12 @@ #clock-cells = <0>; clock-frequency = <19200000>; }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; cpus { -- cgit v1.2.3-59-g8ed1b From 8a250aa6eccdd54aebc62165c0c1fe250fee0338 Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Thu, 29 Aug 2019 22:03:40 +0200 Subject: arm64: dts: qcom: qcs404: add the watchdog node Allows QCS404 based designs to enable watchdog support Reviewed-by: Stephen Boyd Signed-off-by: Jorge Ramirez-Ortiz Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 131d8046d3be..17d4dd54c53a 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -875,6 +875,12 @@ #mbox-cells = <1>; }; + watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3-59-g8ed1b From efb9e0df7d8df9f6ccc4a02a52e56fb6e379e193 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Thu, 22 Aug 2019 13:23:38 +0200 Subject: arm64: dts: msm8916-samsung-a2015: Enable WCNSS for WiFi and BT WCNSS is used on A3U and A5U for WiFi and BT, and seems to work fine without further changes. Enable it in the common include. Signed-off-by: Stephan Gerhold Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index e675ff48fdd2..6fc0b80d1f90 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -63,6 +63,10 @@ }; }; + wcnss@a21b000 { + status = "okay"; + }; + /* * Attempting to enable these devices causes a "synchronous * external abort". Suspected cause is that the debug power -- cgit v1.2.3-59-g8ed1b From 0d7051999175f97dfb1aa32e9008f08bf044a0a7 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Thu, 22 Aug 2019 13:23:39 +0200 Subject: arm64: dts: msm8916-samsung-a5u: Override iris compatible msm8916.dtsi sets the iris compatible to "qcom,wcn3620". While WCN3620 seems to be used on most MSM8916 devices, MSM8916 can also be paired with another chip (e.g. for WiFi dual-band). A5U uses WCN3660B instead, so the compatible needs to be overridden to apply the correct configuration. However, simply using "qcom,wcn3660" would be incorrect, since WCN3660B requires a slightly different regulator configuration compared to WCN3660. Instead, it requires the same configuration as "qcom,wcn3680". Replace the compatible with "qcom,wcn3680" for A5U to make WCNSS work correctly. Signed-off-by: Stephan Gerhold Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 1aa59da98495..6629a621139c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -8,3 +8,9 @@ model = "Samsung Galaxy A5U (EUR)"; compatible = "samsung,a5u-eur", "qcom,msm8916"; }; + +&pronto { + iris { + compatible = "qcom,wcn3680"; + }; +}; -- cgit v1.2.3-59-g8ed1b From 668c7603f011b6e1a07616c8cb9bbbe4229cbb07 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Tue, 23 Jul 2019 17:23:39 +0300 Subject: arm64: dts: qcs404: Add interconnect provider DT nodes Add the DT nodes for the network-on-chip interconnect buses found on qcs404-based platforms. Reviewed-by: Bjorn Andersson Signed-off-by: Georgi Djakov Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 17d4dd54c53a..51f00f6eaa56 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -289,6 +289,15 @@ clock-names = "core"; }; + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + tsens: thermal-sensor@4a9000 { compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; reg = <0x004a9000 0x1000>, /* TM */ @@ -299,6 +308,24 @@ #thermal-sensor-cells = <1>; }; + pcnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + remoteproc_cdsp: remoteproc@b00000 { compatible = "qcom,qcs404-cdsp-pas"; reg = <0x00b00000 0x4040>; -- cgit v1.2.3-59-g8ed1b From 10e99d4754e94008d24e1071093d8b93c30657b1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 29 Aug 2019 22:59:23 -0700 Subject: arm64: dts: qcom: sdm845: Use UFS reset gpio instead of pinctrl We use a pinctrl "workaround" to toggle the UFS reset line. Now that UFS controller can issue the reset, just specify the line as a GPIO and let it be reset that way. Signed-off-by: Stephen Boyd Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 51 ++---------------------------- 1 file changed, 2 insertions(+), 49 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 34881c0113cb..db6159aca8c3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -701,9 +701,8 @@ ap_ts_i2c: &i2c14 { &ufs_mem_hc { status = "okay"; - pinctrl-names = "init", "default"; - pinctrl-0 = <&ufs_dev_reset_assert>; - pinctrl-1 = <&ufs_dev_reset_deassert>; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; vcc-supply = <&src_pp2950_l20a>; vcc-max-microamp = <600000>; @@ -1258,52 +1257,6 @@ ap_ts_i2c: &i2c14 { }; }; - ufs_dev_reset_assert: ufs_dev_reset_assert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * UFS_RESET driver strengths are having - * different values/steps compared to typical - * GPIO drive strengths. - * - * Following table clarifies: - * - * HDRV value | UFS_RESET | Typical GPIO - * (dec) | (mA) | (mA) - * 0 | 0.8 | 2 - * 1 | 1.55 | 4 - * 2 | 2.35 | 6 - * 3 | 3.1 | 8 - * 4 | 3.9 | 10 - * 5 | 4.65 | 12 - * 6 | 5.4 | 14 - * 7 | 6.15 | 16 - * - * POR value for UFS_RESET HDRV is 3 which means - * 3.1mA and we want to use that. Hence just - * specify 8mA to "drive-strength" binding and - * that should result into writing 3 to HDRV - * field. - */ - drive-strength = <8>; /* default: 3.1 mA */ - output-low; /* active low reset */ - }; - }; - - ufs_dev_reset_deassert: ufs_dev_reset_deassert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * default: 3.1 mA - * check comments under ufs_dev_reset_assert - */ - drive-strength = <8>; - output-high; /* active low reset */ - }; - }; - ap_suspend_l_assert: ap_suspend_l_assert { config { pins = "gpio126"; -- cgit v1.2.3-59-g8ed1b From b1b8d080f72808f88bdb3dd3c9b69b115b052f5b Mon Sep 17 00:00:00 2001 From: Michael Srba Date: Mon, 7 Oct 2019 08:45:28 +0200 Subject: arm64: dts: msm8916-samsung-a2015: add tactile buttons and hall sensor Add nodes for basic GPIO connected hardware to the Samsung A3/A5 common dtsi. This includes the Volume UP button, the Home button, and the hall sensor used to sense "smart cover" open state. Related to that, add a node for the Volume DOWN button, which is handled by the pm8916 as is common with msm8916 devices. Tested-by: Stephan Gerhold # a5u Reviewed-by: Stephan Gerhold Signed-off-by: Michael Srba Signed-off-by: Bjorn Andersson --- .../dts/qcom/msm8916-samsung-a2015-common.dtsi | 76 ++++++++++++++++++++++ 1 file changed, 76 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 6fc0b80d1f90..bd1eb3eeca53 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -3,6 +3,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include +#include #include / { @@ -91,6 +92,44 @@ etm@85f000 { status = "disabled"; }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + i2c-muic { compatible = "i2c-gpio"; sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -113,6 +152,30 @@ }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107", "gpio109"; + }; + pinconf { + pins = "gpio107", "gpio109"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gpio_hall_sensor_default: gpio_hall_sensor_default { + pinmux { + function = "gpio"; + pins = "gpio52"; + }; + pinconf { + pins = "gpio52"; + drive-strength = <2>; + bias-disable; + }; + }; + muic_int_default: muic_int_default { pinmux { function = "gpio"; @@ -238,3 +301,16 @@ regulator-max-microvolt = <2700000>; }; }; + +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = ; + }; + }; + }; +}; -- cgit v1.2.3-59-g8ed1b From e38161bd325ea541ef2f258d8e28281077dde524 Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Wed, 12 Dec 2018 18:13:26 +0100 Subject: arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD In the same way as for msm8974-hammerhead, l21 load, used for SDCARD VMMC, needs to be increased in order to prevent any voltage drop issues (due to limited current) happening with some SDCARDS or during specific operations (e.g. write). Reviewed-by: Bjorn Andersson Fixes: 660a9763c6a9 (arm64: dts: qcom: db820c: Add pm8994 regulator node) Signed-off-by: Loic Poulain Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 04ad2fb22b9a..dba3488492f1 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -623,6 +623,8 @@ l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; }; l22 { regulator-min-microvolt = <3300000>; -- cgit v1.2.3-59-g8ed1b From b0e1600dd46d305d6eac894bc3dd414321657e70 Mon Sep 17 00:00:00 2001 From: Nikita Travkin Date: Sat, 12 Oct 2019 19:58:20 +0500 Subject: arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT WCNSS is used on L8150 for WiFi and BT. Its firmware isn't relocatable and must be loaded at specific address. Reviewed-by: Stephan Gerhold Signed-off-by: Nikita Travkin Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 2b28e383fd0b..e4d467e7dedb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -18,6 +18,16 @@ stdout-path = "serial0"; }; + reserved-memory { + // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /delete-node/ wcnss@89300000; + + wcnss_mem: wcnss@8b600000 { + reg = <0x0 0x8b600000 0x0 0x600000>; + no-map; + }; + }; + soc { sdhci@7824000 { status = "okay"; @@ -68,6 +78,10 @@ }; }; + wcnss@a21b000 { + status = "okay"; + }; + /* * Attempting to enable these devices causes a "synchronous * external abort". Suspected cause is that the debug power -- cgit v1.2.3-59-g8ed1b From 3ba8bbc41f5d1169c6a27de44df0d88d3a44f239 Mon Sep 17 00:00:00 2001 From: Nikita Travkin Date: Sat, 12 Oct 2019 19:58:21 +0500 Subject: arm64: dts: msm8916-longcheer-l8150: Add Volume buttons Add nodes for Volume UP button connected to GPIO and Volume DOWN button, which is handled by the pm8916 as is common with msm8916 devices. Reviewed-by: Stephan Gerhold Signed-off-by: Nikita Travkin Signed-off-by: Bjorn Andersson --- .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index e4d467e7dedb..d1ccb9472c8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -5,6 +5,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include +#include / { model = "Longcheer L8150"; @@ -113,9 +114,36 @@ pinctrl-names = "default"; pinctrl-0 = <&usb_vbus_default>; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107"; + }; + pinconf { + pins = "gpio107"; + drive-strength = <2>; + bias-pull-up; + }; + }; + usb_vbus_default: usb-vbus-default { pinmux { function = "gpio"; @@ -128,6 +156,19 @@ }; }; +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = ; + }; + }; + }; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; -- cgit v1.2.3-59-g8ed1b From f1c1d4fef30e170a22bb417d2d12b64eb99a2138 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Thu, 17 Oct 2019 15:18:40 -0700 Subject: arm64: dts: qcom: msm8998: Add blsp1 BAM The BAM in the blsp1 block can be used as a DMA engine to offload work when managing any of the peripherals in the blsp. Signed-off-by: Jeffrey Hugo Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index c6f81431983e..5a524116cab4 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1556,6 +1556,19 @@ status = "disabled"; }; + blsp1_dma: dma@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x25000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp1_i2c1: i2c@c175000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c175000 0x600>; -- cgit v1.2.3-59-g8ed1b From 73d4d2ef58189b5d3d64577c54585b3413111e59 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Thu, 17 Oct 2019 15:18:41 -0700 Subject: arm64: dts: qcom: msm8998: Add blsp1_uart3 The blsp1_uart3 peripheral appears to be commonly used for interfacing with other SoCs on a platform, such as a wcn3990 to provide bluetooth. Signed-off-by: Jeffrey Hugo Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-pins.dtsi | 13 +++++++++++++ arch/arm64/boot/dts/qcom/msm8998.dtsi | 14 ++++++++++++++ 2 files changed, 27 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi index 6db70acd38ee..e32d3ab395ea 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi @@ -75,4 +75,17 @@ drive-strength = <2>; /* 2 mA */ }; }; + + blsp1_uart3_on: blsp1_uart3_on { + mux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart3_a"; + }; + + config { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <2>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 5a524116cab4..f999fdc30086 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1569,6 +1569,20 @@ qcom,num-ees = <4>; }; + blsp1_uart3: serial@c171000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c171000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_on>; + status = "disabled"; + }; + blsp1_i2c1: i2c@c175000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c175000 0x600>; -- cgit v1.2.3-59-g8ed1b From 4cffb9f2c70066c8f3129c9e59f515cc4186aa6c Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Thu, 17 Oct 2019 15:18:42 -0700 Subject: arm64: dts: qcom: msm8998-mtp: Enable bluetooth Bluetooth is provided by a wcn3990, which is connected to the main SoC via blsp1_uart3. Signed-off-by: Jeffrey Hugo Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 108667ce4f31..8adb4969baec 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -23,6 +23,20 @@ }; }; +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + &blsp2_uart1 { status = "okay"; }; -- cgit v1.2.3-59-g8ed1b From 22e916e7ac046a7f3c21af65381b2ce31f3ef316 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Thu, 17 Oct 2019 15:18:43 -0700 Subject: arm64: dts: qcom: msm8998-clamshell: Enable bluetooth Bluetooth is provided by a wcn3990, which is connected to the main SoC via blsp1_uart3. Signed-off-by: Jeffrey Hugo Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 9682d4dd7496..38a1c2ba5e83 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -23,6 +23,20 @@ }; }; +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + &qusb2phy { status = "okay"; @@ -104,6 +118,7 @@ vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-allow-set-load; }; vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; @@ -144,6 +159,7 @@ vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; + regulator-allow-set-load; }; vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; @@ -179,6 +195,7 @@ vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; + regulator-allow-set-load; }; vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; -- cgit v1.2.3-59-g8ed1b From 3cd82e95daa7c0385a9e6f80454117ae4ef54671 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Thu, 17 Oct 2019 22:57:06 -0700 Subject: arm64: dts: qcom: c630: Enable adsp, cdsp and mpss Specify the firmware-name for the adsp, cdsp and mpss and enable the nodes. Reviewed-by: Jeffrey Hugo Reviewed-by: Sibi Sankar Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index ded120d3aef5..13dc619687f3 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -20,6 +20,11 @@ }; }; +&adsp_pas { + firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; + status = "okay"; +}; + &apps_rsc { pm8998-rpmh-regulators { compatible = "qcom,pm8998-rpmh-regulators"; @@ -229,6 +234,11 @@ status = "disabled"; }; +&cdsp_pas { + firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; + status = "okay"; +}; + &gcc { protected-clocks = , , @@ -296,6 +306,10 @@ }; }; +&mss_pil { + firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; +}; + &qup_i2c12_default { drive-strength = <2>; bias-disable; -- cgit v1.2.3-59-g8ed1b From ef8576789e869b7584684ae81126a465eb1deeb6 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Wed, 2 Oct 2019 21:13:45 -0700 Subject: arm64: dts: qcom: sdm845: Add APSS watchdog node Add a node describing the watchdog found in the application subsystem. Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f406a4340b05..0d8cd9807150 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3084,6 +3084,12 @@ status = "disabled"; }; + watchdog@17980000 { + compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; + reg = <0 0x17980000 0 0x1000>; + clocks = <&sleep_clk>; + }; + apss_shared: mailbox@17990000 { compatible = "qcom,sdm845-apss-shared"; reg = <0 0x17990000 0 0x1000>; -- cgit v1.2.3-59-g8ed1b From e51f7ff44686858fa4dc4c4ef2bcede7f4242a15 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 21 Oct 2019 16:05:30 +0530 Subject: arm64: dts: qcs404: thermal: Add interrupt support Register upper-lower interrupt for the tsens controller. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 51f00f6eaa56..f5f0c4c9cb16 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -305,6 +305,8 @@ nvmem-cells = <&tsens_caldata>; nvmem-cell-names = "calib"; #qcom,sensors = <10>; + interrupts = ; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; -- cgit v1.2.3-59-g8ed1b From bb54e3fa65d05ddcb2aa9055f6334ae7a1da8896 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 21 Oct 2019 16:05:29 +0530 Subject: arm64: dts: msm8998: thermal: Add interrupt support Register upper-lower interrupts for each of the two tsens controllers. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index f999fdc30086..6e7bddd1e0fc 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -816,8 +816,9 @@ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; reg = <0x010ab000 0x1000>, /* TM */ <0x010aa000 0x1000>; /* SROT */ - #qcom,sensors = <14>; + interrupts = ; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -825,8 +826,9 @@ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; reg = <0x010ae000 0x1000>, /* TM */ <0x010ad000 0x1000>; /* SROT */ - #qcom,sensors = <8>; + interrupts = ; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; -- cgit v1.2.3-59-g8ed1b From 6eb1c8ade5e8665eb97f8416eee0942c9f90b12b Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 21 Oct 2019 16:05:28 +0530 Subject: arm64: dts: msm8996: thermal: Add interrupt support Register upper-lower interrupts for each of the two tsens controllers. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 87f4d9c1b0d4..4ca2e7b44559 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -591,6 +591,8 @@ reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; + interrupts = ; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -599,6 +601,8 @@ reg = <0x4ad000 0x1000>, /* TM */ <0x4ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; + interrupts = ; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; -- cgit v1.2.3-59-g8ed1b From 4fc5d78fda7a367f19163b725dbae1bb1796e30c Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 21 Oct 2019 16:05:27 +0530 Subject: arm64: dts: sdm845: thermal: Add interrupt support Register upper-lower interrupts for each of the two tsens controllers. Signed-off-by: Amit Kucheria Reviewed-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0d8cd9807150..1ed0ba152c90 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2950,6 +2950,8 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; + interrupts = ; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -2958,6 +2960,8 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; + interrupts = ; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; -- cgit v1.2.3-59-g8ed1b From 15424f4fa9d733a6b62da3839cd9e71e056214d7 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Mon, 21 Oct 2019 16:05:25 +0530 Subject: arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors msm8916 uses sensors 0, 1, 2, 4 and 5. Sensor 3 is NOT used. Fixup the device tree so that the correct sensor ID is used and as a result we can actually check the temperature for the cpu2_3 sensor. Signed-off-by: Amit Kucheria Reviewed-by: Daniel Lezcano Reviewed-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5ea9fb8f2f87..8686e101905c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -179,7 +179,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 4>; + thermal-sensors = <&tsens 5>; trips { cpu0_1_alert0: trip-point@0 { @@ -209,7 +209,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 3>; + thermal-sensors = <&tsens 4>; trips { cpu2_3_alert0: trip-point@0 { -- cgit v1.2.3-59-g8ed1b From 43b0a4b482478aa4fe7240230be74a79dee95679 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 25 Oct 2019 14:21:06 -0700 Subject: arm64: dts: qcom: sdm845-cheza: delete zap-shader This is unused on cheza. Delete the node to get ride of the reserved- memory section, and to avoid the driver from attempting to load a zap shader that doesn't exist every time it powers up the GPU. This also avoids a massive amount of dmesg spam about missing zap fw: msm ae00000.mdss: [drm:adreno_request_fw] *ERROR* failed to load qcom/a630_zap.mdt: -2 adreno 5000000.gpu: [drm:adreno_zap_shader_load] *ERROR* Unable to load a630_zap.mdt Signed-off-by: Rob Clark Cc: Douglas Anderson Fixes: 3fdeaee951aa ("arm64: dts: sdm845: Add zap shader region for GPU") Reviewed-by: Douglas Anderson Tested-by: Douglas Anderson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 ++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index db6159aca8c3..9a4ff57fc877 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -165,6 +165,8 @@ /delete-node/ &venus_mem; /delete-node/ &cdsp_mem; /delete-node/ &cdsp_pas; +/delete-node/ &zap_shader; +/delete-node/ &gpu_mem; /* Increase the size from 120 MB to 128 MB */ &mpss_region { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 1ed0ba152c90..ddb1f23c936f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2824,7 +2824,7 @@ qcom,gmu = <&gmu>; - zap-shader { + zap_shader: zap-shader { memory-region = <&gpu_mem>; }; -- cgit v1.2.3-59-g8ed1b From b40dd23f9a8987c8336df0a00e33f52b1f3f19ad Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Wed, 2 Oct 2019 12:07:56 -0700 Subject: arm64: dts: qcom: msm8998-clamshell: Remove retention idle state The retention idle state does not appear to be supported by the firmware present on the msm8998 laptops since the state is advertised as disabled in ACPI, and attempting to enable the state in DT is observed to result in boot hangs. Therefore, remove the state from use to address the observed issues. Reviewed-by: Amit Kucheria Fixes: 2c6d2d3a580a (arm64: dts: qcom: Add Lenovo Miix 630) Signed-off-by: Jeffrey Hugo Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 37 +++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 38a1c2ba5e83..6138b58db6d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -37,6 +37,43 @@ }; }; +/* + * The laptop FW does not appear to support the retention state as it is + * not advertised as enabled in ACPI, and enabling it in DT can cause boot + * hangs. + */ +&CPU0 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU1 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU2 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU3 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU4 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU5 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU6 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU7 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + &qusb2phy { status = "okay"; -- cgit v1.2.3-59-g8ed1b From a636f93fcdb4a516e7cba6a365645ee8429602b2 Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Thu, 3 Oct 2019 12:14:49 +0530 Subject: arm64: dts: qcom: msm8998: Disable coresight by default Boot failure has been reported on MSM8998 based laptop when coresight is enabled. This is most likely due to lack of firmware support for coresight on production device when compared to debug device like MTP where this issue is not observed. So disable coresight by default for MSM8998 and enable it only for MSM8998 MTP. Reported-and-tested-by: Jeffrey Hugo Fixes: 783abfa2249a ("arm64: dts: qcom: msm8998: Add Coresight support") Signed-off-by: Sai Prakash Ranjan Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 68 +++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8998.dtsi | 51 +++++++++++++++-------- 2 files changed, 102 insertions(+), 17 deletions(-) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 8adb4969baec..5f101a20a20a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -41,6 +41,66 @@ status = "okay"; }; +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + status = "okay"; +}; + +&funnel5 { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -65,6 +125,10 @@ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; +&replicator1 { + status = "okay"; +}; + &rpm_requests { pm8998-regulators { compatible = "qcom,rpm-pm8998-regulators"; @@ -263,6 +327,10 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&stm { + status = "okay"; +}; + &ufshc { vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 6e7bddd1e0fc..fc7838ea9a01 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1000,11 +1000,12 @@ #interrupt-cells = <0x2>; }; - stm@6002000 { + stm: stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, <0x16280000 0x180000>; reg-names = "stm-base", "stm-data-base"; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1018,9 +1019,10 @@ }; }; - funnel@6041000 { + funnel1: funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06041000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1047,9 +1049,10 @@ }; }; - funnel@6042000 { + funnel2: funnel@6042000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06042000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1077,9 +1080,10 @@ }; }; - funnel@6045000 { + funnel3: funnel@6045000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06045000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1115,9 +1119,10 @@ }; }; - replicator@6046000 { + replicator1: replicator@6046000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0x06046000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1139,9 +1144,10 @@ }; }; - etf@6047000 { + etf: etf@6047000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x06047000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1165,9 +1171,10 @@ }; }; - etr@6048000 { + etr: etr@6048000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x06048000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1183,9 +1190,10 @@ }; }; - etm@7840000 { + etm1: etm@7840000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07840000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1202,9 +1210,10 @@ }; }; - etm@7940000 { + etm2: etm@7940000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07940000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1221,9 +1230,10 @@ }; }; - etm@7a40000 { + etm3: etm@7a40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07a40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1240,9 +1250,10 @@ }; }; - etm@7b40000 { + etm4: etm@7b40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07b40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1259,9 +1270,10 @@ }; }; - funnel@7b60000 { /* APSS Funnel */ + funnel4: funnel@7b60000 { /* APSS Funnel */ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07b60000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1345,9 +1357,10 @@ }; }; - funnel@7b70000 { + funnel5: funnel@7b70000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x07b70000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1371,9 +1384,10 @@ }; }; - etm@7c40000 { + etm5: etm@7c40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07c40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1387,9 +1401,10 @@ }; }; - etm@7d40000 { + etm6: etm@7d40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07d40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1403,9 +1418,10 @@ }; }; - etm@7e40000 { + etm7: etm@7e40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07e40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1419,9 +1435,10 @@ }; }; - etm@7f40000 { + etm8: etm@7f40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07f40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; -- cgit v1.2.3-59-g8ed1b From 915603b106164f966ebc027de96e54011885bdf4 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 1 Oct 2019 21:16:54 -0700 Subject: arm64: dts: qcom: db845c: Enable LVS 1 and 2 vreg_lvs1a_1p8 and vreg_lvs2a_1p8 are both feeding pins in the low speed connectors and should as such alway be on, so enable them. Acked-by: Vinod Koul Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm64/boot') diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index f5a85caff1a3..d100f46791a6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -312,6 +312,18 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; pmi8998-rpmh-regulators { -- cgit v1.2.3-59-g8ed1b