From 44d032e7940131fd991a01a948630747d91fe983 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 26 Jan 2013 20:50:12 +0000 Subject: ARM: Kirkwood: topkick: Enable i2c bus. Add a DT node for I2C and pinctrl hog for the pins. There appears to be an i2c bus on topkick with a device on it: i2cdetect 0 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-0. I will probe address range 0x03-0x77. Continue? [Y/n] y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- 64 -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- Signed-off-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-topkick.dts | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index bb1d4df5c690..754f7efc0eec 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -52,7 +52,8 @@ &pmx_sw_left2 &pmx_led_wifi_yellow &pmx_uart0 - &pmx_nand >; + &pmx_nand + &pmx_twsi0 >; pinctrl-names = "default"; pmx_led_disk_yellow: pmx-led-disk-yellow { @@ -144,6 +145,10 @@ status = "okay"; nr-ports = <1>; }; + + i2c@11000 { + status = "ok"; + }; }; gpio-leds { -- cgit v1.2.3-59-g8ed1b