From 5924be937acbd1b11adb7be9b9bfab7ceda49050 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 11 Oct 2007 11:12:03 +0200 Subject: i386: prepare shared kernel/smp.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/i386/kernel/smp.c | 707 ------------------------------------------------- 1 file changed, 707 deletions(-) delete mode 100644 arch/i386/kernel/smp.c (limited to 'arch/i386/kernel/smp.c') diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c deleted file mode 100644 index 2d35d8502029..000000000000 --- a/arch/i386/kernel/smp.c +++ /dev/null @@ -1,707 +0,0 @@ -/* - * Intel SMP support routines. - * - * (c) 1995 Alan Cox, Building #3 - * (c) 1998-99, 2000 Ingo Molnar - * - * This code is released under the GNU General Public License version 2 or - * later. - */ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * Some notes on x86 processor bugs affecting SMP operation: - * - * Pentium, Pentium Pro, II, III (and all CPUs) have bugs. - * The Linux implications for SMP are handled as follows: - * - * Pentium III / [Xeon] - * None of the E1AP-E3AP errata are visible to the user. - * - * E1AP. see PII A1AP - * E2AP. see PII A2AP - * E3AP. see PII A3AP - * - * Pentium II / [Xeon] - * None of the A1AP-A3AP errata are visible to the user. - * - * A1AP. see PPro 1AP - * A2AP. see PPro 2AP - * A3AP. see PPro 7AP - * - * Pentium Pro - * None of 1AP-9AP errata are visible to the normal user, - * except occasional delivery of 'spurious interrupt' as trap #15. - * This is very rare and a non-problem. - * - * 1AP. Linux maps APIC as non-cacheable - * 2AP. worked around in hardware - * 3AP. fixed in C0 and above steppings microcode update. - * Linux does not use excessive STARTUP_IPIs. - * 4AP. worked around in hardware - * 5AP. symmetric IO mode (normal Linux operation) not affected. - * 'noapic' mode has vector 0xf filled out properly. - * 6AP. 'noapic' mode might be affected - fixed in later steppings - * 7AP. We do not assume writes to the LVT deassering IRQs - * 8AP. We do not enable low power mode (deep sleep) during MP bootup - * 9AP. We do not use mixed mode - * - * Pentium - * There is a marginal case where REP MOVS on 100MHz SMP - * machines with B stepping processors can fail. XXX should provide - * an L1cache=Writethrough or L1cache=off option. - * - * B stepping CPUs may hang. There are hardware work arounds - * for this. We warn about it in case your board doesn't have the work - * arounds. Basically thats so I can tell anyone with a B stepping - * CPU and SMP problems "tough". - * - * Specific items [From Pentium Processor Specification Update] - * - * 1AP. Linux doesn't use remote read - * 2AP. Linux doesn't trust APIC errors - * 3AP. We work around this - * 4AP. Linux never generated 3 interrupts of the same priority - * to cause a lost local interrupt. - * 5AP. Remote read is never used - * 6AP. not affected - worked around in hardware - * 7AP. not affected - worked around in hardware - * 8AP. worked around in hardware - we get explicit CS errors if not - * 9AP. only 'noapic' mode affected. Might generate spurious - * interrupts, we log only the first one and count the - * rest silently. - * 10AP. not affected - worked around in hardware - * 11AP. Linux reads the APIC between writes to avoid this, as per - * the documentation. Make sure you preserve this as it affects - * the C stepping chips too. - * 12AP. not affected - worked around in hardware - * 13AP. not affected - worked around in hardware - * 14AP. we always deassert INIT during bootup - * 15AP. not affected - worked around in hardware - * 16AP. not affected - worked around in hardware - * 17AP. not affected - worked around in hardware - * 18AP. not affected - worked around in hardware - * 19AP. not affected - worked around in BIOS - * - * If this sounds worrying believe me these bugs are either ___RARE___, - * or are signal timing bugs worked around in hardware and there's - * about nothing of note with C stepping upwards. - */ - -DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0, }; - -/* - * the following functions deal with sending IPIs between CPUs. - * - * We use 'broadcast', CPU->CPU IPIs and self-IPIs too. - */ - -static inline int __prepare_ICR (unsigned int shortcut, int vector) -{ - unsigned int icr = shortcut | APIC_DEST_LOGICAL; - - switch (vector) { - default: - icr |= APIC_DM_FIXED | vector; - break; - case NMI_VECTOR: - icr |= APIC_DM_NMI; - break; - } - return icr; -} - -static inline int __prepare_ICR2 (unsigned int mask) -{ - return SET_APIC_DEST_FIELD(mask); -} - -void __send_IPI_shortcut(unsigned int shortcut, int vector) -{ - /* - * Subtle. In the case of the 'never do double writes' workaround - * we have to lock out interrupts to be safe. As we don't care - * of the value read we use an atomic rmw access to avoid costly - * cli/sti. Otherwise we use an even cheaper single atomic write - * to the APIC. - */ - unsigned int cfg; - - /* - * Wait for idle. - */ - apic_wait_icr_idle(); - - /* - * No need to touch the target chip field - */ - cfg = __prepare_ICR(shortcut, vector); - - /* - * Send the IPI. The write to APIC_ICR fires this off. - */ - apic_write_around(APIC_ICR, cfg); -} - -void fastcall send_IPI_self(int vector) -{ - __send_IPI_shortcut(APIC_DEST_SELF, vector); -} - -/* - * This is used to send an IPI with no shorthand notation (the destination is - * specified in bits 56 to 63 of the ICR). - */ -static inline void __send_IPI_dest_field(unsigned long mask, int vector) -{ - unsigned long cfg; - - /* - * Wait for idle. - */ - if (unlikely(vector == NMI_VECTOR)) - safe_apic_wait_icr_idle(); - else - apic_wait_icr_idle(); - - /* - * prepare target chip field - */ - cfg = __prepare_ICR2(mask); - apic_write_around(APIC_ICR2, cfg); - - /* - * program the ICR - */ - cfg = __prepare_ICR(0, vector); - - /* - * Send the IPI. The write to APIC_ICR fires this off. - */ - apic_write_around(APIC_ICR, cfg); -} - -/* - * This is only used on smaller machines. - */ -void send_IPI_mask_bitmask(cpumask_t cpumask, int vector) -{ - unsigned long mask = cpus_addr(cpumask)[0]; - unsigned long flags; - - local_irq_save(flags); - WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]); - __send_IPI_dest_field(mask, vector); - local_irq_restore(flags); -} - -void send_IPI_mask_sequence(cpumask_t mask, int vector) -{ - unsigned long flags; - unsigned int query_cpu; - - /* - * Hack. The clustered APIC addressing mode doesn't allow us to send - * to an arbitrary mask, so I do a unicasts to each CPU instead. This - * should be modified to do 1 message per cluster ID - mbligh - */ - - local_irq_save(flags); - for (query_cpu = 0; query_cpu < NR_CPUS; ++query_cpu) { - if (cpu_isset(query_cpu, mask)) { - __send_IPI_dest_field(cpu_to_logical_apicid(query_cpu), - vector); - } - } - local_irq_restore(flags); -} - -#include /* must come after the send_IPI functions above for inlining */ - -/* - * Smarter SMP flushing macros. - * c/o Linus Torvalds. - * - * These mean you can really definitely utterly forget about - * writing to user space from interrupts. (Its not allowed anyway). - * - * Optimizations Manfred Spraul - */ - -static cpumask_t flush_cpumask; -static struct mm_struct * flush_mm; -static unsigned long flush_va; -static DEFINE_SPINLOCK(tlbstate_lock); - -/* - * We cannot call mmdrop() because we are in interrupt context, - * instead update mm->cpu_vm_mask. - * - * We need to reload %cr3 since the page tables may be going - * away from under us.. - */ -void leave_mm(unsigned long cpu) -{ - if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) - BUG(); - cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask); - load_cr3(swapper_pg_dir); -} - -/* - * - * The flush IPI assumes that a thread switch happens in this order: - * [cpu0: the cpu that switches] - * 1) switch_mm() either 1a) or 1b) - * 1a) thread switch to a different mm - * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); - * Stop ipi delivery for the old mm. This is not synchronized with - * the other cpus, but smp_invalidate_interrupt ignore flush ipis - * for the wrong mm, and in the worst case we perform a superflous - * tlb flush. - * 1a2) set cpu_tlbstate to TLBSTATE_OK - * Now the smp_invalidate_interrupt won't call leave_mm if cpu0 - * was in lazy tlb mode. - * 1a3) update cpu_tlbstate[].active_mm - * Now cpu0 accepts tlb flushes for the new mm. - * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); - * Now the other cpus will send tlb flush ipis. - * 1a4) change cr3. - * 1b) thread switch without mm change - * cpu_tlbstate[].active_mm is correct, cpu0 already handles - * flush ipis. - * 1b1) set cpu_tlbstate to TLBSTATE_OK - * 1b2) test_and_set the cpu bit in cpu_vm_mask. - * Atomically set the bit [other cpus will start sending flush ipis], - * and test the bit. - * 1b3) if the bit was 0: leave_mm was called, flush the tlb. - * 2) switch %%esp, ie current - * - * The interrupt must handle 2 special cases: - * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm. - * - the cpu performs speculative tlb reads, i.e. even if the cpu only - * runs in kernel space, the cpu could load tlb entries for user space - * pages. - * - * The good news is that cpu_tlbstate is local to each cpu, no - * write/read ordering problems. - */ - -/* - * TLB flush IPI: - * - * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. - * 2) Leave the mm if we are in the lazy tlb mode. - */ - -fastcall void smp_invalidate_interrupt(struct pt_regs *regs) -{ - unsigned long cpu; - - cpu = get_cpu(); - - if (!cpu_isset(cpu, flush_cpumask)) - goto out; - /* - * This was a BUG() but until someone can quote me the - * line from the intel manual that guarantees an IPI to - * multiple CPUs is retried _only_ on the erroring CPUs - * its staying as a return - * - * BUG(); - */ - - if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) { - if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) { - if (flush_va == TLB_FLUSH_ALL) - local_flush_tlb(); - else - __flush_tlb_one(flush_va); - } else - leave_mm(cpu); - } - ack_APIC_irq(); - smp_mb__before_clear_bit(); - cpu_clear(cpu, flush_cpumask); - smp_mb__after_clear_bit(); -out: - put_cpu_no_resched(); -} - -void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, - unsigned long va) -{ - cpumask_t cpumask = *cpumaskp; - - /* - * A couple of (to be removed) sanity checks: - * - * - current CPU must not be in mask - * - mask must exist :) - */ - BUG_ON(cpus_empty(cpumask)); - BUG_ON(cpu_isset(smp_processor_id(), cpumask)); - BUG_ON(!mm); - -#ifdef CONFIG_HOTPLUG_CPU - /* If a CPU which we ran on has gone down, OK. */ - cpus_and(cpumask, cpumask, cpu_online_map); - if (unlikely(cpus_empty(cpumask))) - return; -#endif - - /* - * i'm not happy about this global shared spinlock in the - * MM hot path, but we'll see how contended it is. - * AK: x86-64 has a faster method that could be ported. - */ - spin_lock(&tlbstate_lock); - - flush_mm = mm; - flush_va = va; - cpus_or(flush_cpumask, cpumask, flush_cpumask); - /* - * We have to send the IPI only to - * CPUs affected. - */ - send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR); - - while (!cpus_empty(flush_cpumask)) - /* nothing. lockup detection does not belong here */ - cpu_relax(); - - flush_mm = NULL; - flush_va = 0; - spin_unlock(&tlbstate_lock); -} - -void flush_tlb_current_task(void) -{ - struct mm_struct *mm = current->mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - local_flush_tlb(); - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); - preempt_enable(); -} - -void flush_tlb_mm (struct mm_struct * mm) -{ - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - if (current->active_mm == mm) { - if (current->mm) - local_flush_tlb(); - else - leave_mm(smp_processor_id()); - } - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); - - preempt_enable(); -} - -void flush_tlb_page(struct vm_area_struct * vma, unsigned long va) -{ - struct mm_struct *mm = vma->vm_mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - if (current->active_mm == mm) { - if(current->mm) - __flush_tlb_one(va); - else - leave_mm(smp_processor_id()); - } - - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, va); - - preempt_enable(); -} -EXPORT_SYMBOL(flush_tlb_page); - -static void do_flush_tlb_all(void* info) -{ - unsigned long cpu = smp_processor_id(); - - __flush_tlb_all(); - if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY) - leave_mm(cpu); -} - -void flush_tlb_all(void) -{ - on_each_cpu(do_flush_tlb_all, NULL, 1, 1); -} - -/* - * this function sends a 'reschedule' IPI to another CPU. - * it goes straight through and wastes no time serializing - * anything. Worst case is that we lose a reschedule ... - */ -static void native_smp_send_reschedule(int cpu) -{ - WARN_ON(cpu_is_offline(cpu)); - send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR); -} - -/* - * Structure and data for smp_call_function(). This is designed to minimise - * static memory requirements. It also looks cleaner. - */ -static DEFINE_SPINLOCK(call_lock); - -struct call_data_struct { - void (*func) (void *info); - void *info; - atomic_t started; - atomic_t finished; - int wait; -}; - -void lock_ipi_call_lock(void) -{ - spin_lock_irq(&call_lock); -} - -void unlock_ipi_call_lock(void) -{ - spin_unlock_irq(&call_lock); -} - -static struct call_data_struct *call_data; - -static void __smp_call_function(void (*func) (void *info), void *info, - int nonatomic, int wait) -{ - struct call_data_struct data; - int cpus = num_online_cpus() - 1; - - if (!cpus) - return; - - data.func = func; - data.info = info; - atomic_set(&data.started, 0); - data.wait = wait; - if (wait) - atomic_set(&data.finished, 0); - - call_data = &data; - mb(); - - /* Send a message to all other CPUs and wait for them to respond */ - send_IPI_allbutself(CALL_FUNCTION_VECTOR); - - /* Wait for response */ - while (atomic_read(&data.started) != cpus) - cpu_relax(); - - if (wait) - while (atomic_read(&data.finished) != cpus) - cpu_relax(); -} - - -/** - * smp_call_function_mask(): Run a function on a set of other CPUs. - * @mask: The set of cpus to run on. Must not include the current cpu. - * @func: The function to run. This must be fast and non-blocking. - * @info: An arbitrary pointer to pass to the function. - * @wait: If true, wait (atomically) until function has completed on other CPUs. - * - * Returns 0 on success, else a negative status code. - * - * If @wait is true, then returns once @func has returned; otherwise - * it returns just before the target cpu calls @func. - * - * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler. - */ -static int -native_smp_call_function_mask(cpumask_t mask, - void (*func)(void *), void *info, - int wait) -{ - struct call_data_struct data; - cpumask_t allbutself; - int cpus; - - /* Can deadlock when called with interrupts disabled */ - WARN_ON(irqs_disabled()); - - /* Holding any lock stops cpus from going down. */ - spin_lock(&call_lock); - - allbutself = cpu_online_map; - cpu_clear(smp_processor_id(), allbutself); - - cpus_and(mask, mask, allbutself); - cpus = cpus_weight(mask); - - if (!cpus) { - spin_unlock(&call_lock); - return 0; - } - - data.func = func; - data.info = info; - atomic_set(&data.started, 0); - data.wait = wait; - if (wait) - atomic_set(&data.finished, 0); - - call_data = &data; - mb(); - - /* Send a message to other CPUs */ - if (cpus_equal(mask, allbutself)) - send_IPI_allbutself(CALL_FUNCTION_VECTOR); - else - send_IPI_mask(mask, CALL_FUNCTION_VECTOR); - - /* Wait for response */ - while (atomic_read(&data.started) != cpus) - cpu_relax(); - - if (wait) - while (atomic_read(&data.finished) != cpus) - cpu_relax(); - spin_unlock(&call_lock); - - return 0; -} - -static void stop_this_cpu (void * dummy) -{ - local_irq_disable(); - /* - * Remove this CPU: - */ - cpu_clear(smp_processor_id(), cpu_online_map); - disable_local_APIC(); - if (cpu_data[smp_processor_id()].hlt_works_ok) - for(;;) halt(); - for (;;); -} - -/* - * this function calls the 'stop' function on all other CPUs in the system. - */ - -static void native_smp_send_stop(void) -{ - /* Don't deadlock on the call lock in panic */ - int nolock = !spin_trylock(&call_lock); - unsigned long flags; - - local_irq_save(flags); - __smp_call_function(stop_this_cpu, NULL, 0, 0); - if (!nolock) - spin_unlock(&call_lock); - disable_local_APIC(); - local_irq_restore(flags); -} - -/* - * Reschedule call back. Nothing to do, - * all the work is done automatically when - * we return from the interrupt. - */ -fastcall void smp_reschedule_interrupt(struct pt_regs *regs) -{ - ack_APIC_irq(); -} - -fastcall void smp_call_function_interrupt(struct pt_regs *regs) -{ - void (*func) (void *info) = call_data->func; - void *info = call_data->info; - int wait = call_data->wait; - - ack_APIC_irq(); - /* - * Notify initiating CPU that I've grabbed the data and am - * about to execute the function - */ - mb(); - atomic_inc(&call_data->started); - /* - * At this point the info structure may be out of scope unless wait==1 - */ - irq_enter(); - (*func)(info); - irq_exit(); - - if (wait) { - mb(); - atomic_inc(&call_data->finished); - } -} - -static int convert_apicid_to_cpu(int apic_id) -{ - int i; - - for (i = 0; i < NR_CPUS; i++) { - if (x86_cpu_to_apicid[i] == apic_id) - return i; - } - return -1; -} - -int safe_smp_processor_id(void) -{ - int apicid, cpuid; - - if (!boot_cpu_has(X86_FEATURE_APIC)) - return 0; - - apicid = hard_smp_processor_id(); - if (apicid == BAD_APICID) - return 0; - - cpuid = convert_apicid_to_cpu(apicid); - - return cpuid >= 0 ? cpuid : 0; -} - -struct smp_ops smp_ops = { - .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, - .smp_prepare_cpus = native_smp_prepare_cpus, - .cpu_up = native_cpu_up, - .smp_cpus_done = native_smp_cpus_done, - - .smp_send_stop = native_smp_send_stop, - .smp_send_reschedule = native_smp_send_reschedule, - .smp_call_function_mask = native_smp_call_function_mask, -}; -- cgit v1.2.3-59-g8ed1b