From 826c0e9e6ced6c1bb2d3f067ddff93d706b86446 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 11 Oct 2007 11:12:56 +0200 Subject: i386: prepare shared kernel/trampoline.S Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/i386/kernel/Makefile | 2 +- arch/i386/kernel/trampoline.S | 85 ---------------------------------------- arch/i386/kernel/trampoline_32.S | 85 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 86 insertions(+), 86 deletions(-) delete mode 100644 arch/i386/kernel/trampoline.S create mode 100644 arch/i386/kernel/trampoline_32.S (limited to 'arch/i386/kernel') diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile index c718afe95457..4d7a8e8dc44e 100644 --- a/arch/i386/kernel/Makefile +++ b/arch/i386/kernel/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_APM) += apm_32.o obj-$(CONFIG_X86_SMP) += smp_32.o smpboot_32.o tsc_sync.o obj-$(CONFIG_SMP) += smpcommon_32.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o +obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_32.o obj-$(CONFIG_X86_MPPARSE) += mpparse_32.o obj-$(CONFIG_X86_LOCAL_APIC) += apic_32.o nmi_32.o obj-$(CONFIG_X86_IO_APIC) += io_apic_32.o diff --git a/arch/i386/kernel/trampoline.S b/arch/i386/kernel/trampoline.S deleted file mode 100644 index f62815f8d06a..000000000000 --- a/arch/i386/kernel/trampoline.S +++ /dev/null @@ -1,85 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * - * This is only used for booting secondary CPUs in SMP machine - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * In fact we don't actually need a stack so we don't - * set one up. - * - * We jump into the boot/compressed/head.S code. So you'd - * better be running a compressed kernel image or you - * won't get very far. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * If you work on this file, check the object module with - * objdump --reloc to make sure there are no relocation - * entries except for: - * - * TYPE VALUE - * R_386_32 startup_32_smp - * R_386_32 boot_gdt - */ - -#include -#include -#include - -.data - -/* We can free up trampoline after bootup if cpu hotplug is not supported. */ -#ifndef CONFIG_HOTPLUG_CPU -.section ".init.data","aw",@progbits -#endif - -.code16 - -ENTRY(trampoline_data) -r_base = . - wbinvd # Needed for NUMA-Q should be harmless for others - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - - cli # We should be safe anyway - - movl $0xA5A5A5A5, trampoline_data - r_base - # write marker for master knows we're running - - /* GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl boot_idt_descr - r_base # load idt with 0, 0 - lgdtl boot_gdt_descr - r_base # load gdt with whatever is appropriate - - xor %ax, %ax - inc %ax # protected mode (PE) bit - lmsw %ax # into protected mode - # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S - ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET) - - # These need to be in the same 64K segment as the above; - # hence we don't use the boot_gdt_descr defined in head.S -boot_gdt_descr: - .word __BOOT_DS + 7 # gdt limit - .long boot_gdt - __PAGE_OFFSET # gdt base - -boot_idt_descr: - .word 0 # idt limit = 0 - .long 0 # idt base = 0L - -.globl trampoline_end -trampoline_end: diff --git a/arch/i386/kernel/trampoline_32.S b/arch/i386/kernel/trampoline_32.S new file mode 100644 index 000000000000..f62815f8d06a --- /dev/null +++ b/arch/i386/kernel/trampoline_32.S @@ -0,0 +1,85 @@ +/* + * + * Trampoline.S Derived from Setup.S by Linus Torvalds + * + * 4 Jan 1997 Michael Chastain: changed to gnu as. + * + * This is only used for booting secondary CPUs in SMP machine + * + * Entry: CS:IP point to the start of our code, we are + * in real mode with no stack, but the rest of the + * trampoline page to make our stack and everything else + * is a mystery. + * + * In fact we don't actually need a stack so we don't + * set one up. + * + * We jump into the boot/compressed/head.S code. So you'd + * better be running a compressed kernel image or you + * won't get very far. + * + * On entry to trampoline_data, the processor is in real mode + * with 16-bit addressing and 16-bit data. CS has some value + * and IP is zero. Thus, data addresses need to be absolute + * (no relocation) and are taken with regard to r_base. + * + * If you work on this file, check the object module with + * objdump --reloc to make sure there are no relocation + * entries except for: + * + * TYPE VALUE + * R_386_32 startup_32_smp + * R_386_32 boot_gdt + */ + +#include +#include +#include + +.data + +/* We can free up trampoline after bootup if cpu hotplug is not supported. */ +#ifndef CONFIG_HOTPLUG_CPU +.section ".init.data","aw",@progbits +#endif + +.code16 + +ENTRY(trampoline_data) +r_base = . + wbinvd # Needed for NUMA-Q should be harmless for others + mov %cs, %ax # Code and data in the same place + mov %ax, %ds + + cli # We should be safe anyway + + movl $0xA5A5A5A5, trampoline_data - r_base + # write marker for master knows we're running + + /* GDT tables in non default location kernel can be beyond 16MB and + * lgdt will not be able to load the address as in real mode default + * operand size is 16bit. Use lgdtl instead to force operand size + * to 32 bit. + */ + + lidtl boot_idt_descr - r_base # load idt with 0, 0 + lgdtl boot_gdt_descr - r_base # load gdt with whatever is appropriate + + xor %ax, %ax + inc %ax # protected mode (PE) bit + lmsw %ax # into protected mode + # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S + ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET) + + # These need to be in the same 64K segment as the above; + # hence we don't use the boot_gdt_descr defined in head.S +boot_gdt_descr: + .word __BOOT_DS + 7 # gdt limit + .long boot_gdt - __PAGE_OFFSET # gdt base + +boot_idt_descr: + .word 0 # idt limit = 0 + .long 0 # idt base = 0L + +.globl trampoline_end +trampoline_end: -- cgit v1.2.3-59-g8ed1b