From 5027070b3ca2eb90adbf40c2d67f792818ae9077 Mon Sep 17 00:00:00 2001 From: Anoop P A Date: Tue, 25 Jan 2011 13:52:05 +0530 Subject: MIPS: MSP71xx: Platform support for MSP on-chip USB controller. Signed-off-by: Anoop P A To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Cc: Anoop P A Patchwork: https://patchwork.linux-mips.org/patch/2043/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h | 144 +++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h (limited to 'arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h') diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h new file mode 100644 index 000000000000..4c9348df9df2 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_usb.h @@ -0,0 +1,144 @@ +/****************************************************************** + * Copyright (c) 2000-2007 PMC-Sierra INC. + * + * This program is free software; you can redistribute it + * and/or modify it under the terms of the GNU General + * Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be + * useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA + * 02139, USA. + * + * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND + * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS + * SOFTWARE. + */ +#ifndef MSP_USB_H_ +#define MSP_USB_H_ + +#ifdef CONFIG_MSP_HAS_DUAL_USB +#define NUM_USB_DEVS 2 +#else +#define NUM_USB_DEVS 1 +#endif + +/* Register spaces for USB host 0 */ +#define MSP_USB0_MAB_START (MSP_USB0_BASE + 0x0) +#define MSP_USB0_MAB_END (MSP_USB0_BASE + 0x17) +#define MSP_USB0_ID_START (MSP_USB0_BASE + 0x40000) +#define MSP_USB0_ID_END (MSP_USB0_BASE + 0x4008f) +#define MSP_USB0_HS_START (MSP_USB0_BASE + 0x40100) +#define MSP_USB0_HS_END (MSP_USB0_BASE + 0x401FF) + +/* Register spaces for USB host 1 */ +#define MSP_USB1_MAB_START (MSP_USB1_BASE + 0x0) +#define MSP_USB1_MAB_END (MSP_USB1_BASE + 0x17) +#define MSP_USB1_ID_START (MSP_USB1_BASE + 0x40000) +#define MSP_USB1_ID_END (MSP_USB1_BASE + 0x4008f) +#define MSP_USB1_HS_START (MSP_USB1_BASE + 0x40100) +#define MSP_USB1_HS_END (MSP_USB1_BASE + 0x401ff) + +/* USB Identification registers */ +struct msp_usbid_regs { + u32 id; /* 0x0: Identification register */ + u32 hwgen; /* 0x4: General HW params */ + u32 hwhost; /* 0x8: Host HW params */ + u32 hwdev; /* 0xc: Device HW params */ + u32 hwtxbuf; /* 0x10: Tx buffer HW params */ + u32 hwrxbuf; /* 0x14: Rx buffer HW params */ + u32 reserved[26]; + u32 timer0_load; /* 0x80: General-purpose timer 0 load*/ + u32 timer0_ctrl; /* 0x84: General-purpose timer 0 control */ + u32 timer1_load; /* 0x88: General-purpose timer 1 load*/ + u32 timer1_ctrl; /* 0x8c: General-purpose timer 1 control */ +}; + +/* MSBus to AMBA registers */ +struct msp_mab_regs { + u32 isr; /* 0x0: Interrupt status */ + u32 imr; /* 0x4: Interrupt mask */ + u32 thcr0; /* 0x8: Transaction header capture 0 */ + u32 thcr1; /* 0xc: Transaction header capture 1 */ + u32 int_stat; /* 0x10: Interrupt status summary */ + u32 phy_cfg; /* 0x14: USB phy config */ +}; + +/* EHCI registers */ +struct msp_usbhs_regs { + u32 hciver; /* 0x0: Version and offset to operational regs */ + u32 hcsparams; /* 0x4: Host control structural parameters */ + u32 hccparams; /* 0x8: Host control capability parameters */ + u32 reserved0[5]; + u32 dciver; /* 0x20: Device interface version */ + u32 dccparams; /* 0x24: Device control capability parameters */ + u32 reserved1[6]; + u32 cmd; /* 0x40: USB command */ + u32 sts; /* 0x44: USB status */ + u32 int_ena; /* 0x48: USB interrupt enable */ + u32 frindex; /* 0x4c: Frame index */ + u32 reserved3; + union { + struct { + u32 flb_addr; /* 0x54: Frame list base address */ + u32 next_async_addr; /* 0x58: next asynchronous addr */ + u32 ttctrl; /* 0x5c: embedded transaction translator + async buffer status */ + u32 burst_size; /* 0x60: Controller burst size */ + u32 tx_fifo_ctrl; /* 0x64: Tx latency FIFO tuning */ + u32 reserved0[4]; + u32 endpt_nak; /* 0x78: Endpoint NAK */ + u32 endpt_nak_ena; /* 0x7c: Endpoint NAK enable */ + u32 cfg_flag; /* 0x80: Config flag */ + u32 port_sc1; /* 0x84: Port status & control 1 */ + u32 reserved1[7]; + u32 otgsc; /* 0xa4: OTG status & control */ + u32 mode; /* 0xa8: USB controller mode */ + } host; + + struct { + u32 dev_addr; /* 0x54: Device address */ + u32 endpt_list_addr; /* 0x58: Endpoint list address */ + u32 reserved0[7]; + u32 endpt_nak; /* 0x74 */ + u32 endpt_nak_ctrl; /* 0x78 */ + u32 cfg_flag; /* 0x80 */ + u32 port_sc1; /* 0x84: Port status & control 1 */ + u32 reserved[7]; + u32 otgsc; /* 0xa4: OTG status & control */ + u32 mode; /* 0xa8: USB controller mode */ + u32 endpt_setup_stat; /* 0xac */ + u32 endpt_prime; /* 0xb0 */ + u32 endpt_flush; /* 0xb4 */ + u32 endpt_stat; /* 0xb8 */ + u32 endpt_complete; /* 0xbc */ + u32 endpt_ctrl0; /* 0xc0 */ + u32 endpt_ctrl1; /* 0xc4 */ + u32 endpt_ctrl2; /* 0xc8 */ + u32 endpt_ctrl3; /* 0xcc */ + } device; + } u; +}; +/* + * Container for the more-generic platform_device. + * This exists mainly as a way to map the non-standard register + * spaces and make them accessible to the USB ISR. + */ +struct mspusb_device { + struct msp_mab_regs __iomem *mab_regs; + struct msp_usbid_regs __iomem *usbid_regs; + struct msp_usbhs_regs __iomem *usbhs_regs; + struct platform_device dev; +}; + +#define to_mspusb_device(x) container_of((x), struct mspusb_device, dev) +#define TO_HOST_ID(x) ((x) & 0x3) +#endif /*MSP_USB_H_*/ -- cgit v1.2.3-59-g8ed1b