From a0392222d9a374588803454c4d2211108c64d4e4 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 13 Apr 2012 20:56:13 +0200 Subject: OF: MIPS: lantiq: implement OF support Activate USE_OF, add a sample DTS file and convert the core soc code to OF. Signed-off-by: John Crispin Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3803/ Signed-off-by: Ralf Baechle --- arch/mips/lantiq/Kconfig | 9 +++ arch/mips/lantiq/Makefile | 4 +- arch/mips/lantiq/dts/Makefile | 4 ++ arch/mips/lantiq/dts/danube.dtsi | 105 ++++++++++++++++++++++++++++++++++ arch/mips/lantiq/dts/easy50712.dts | 113 +++++++++++++++++++++++++++++++++++++ arch/mips/lantiq/prom.c | 57 ++++++++++++++----- arch/mips/lantiq/prom.h | 2 + arch/mips/lantiq/setup.c | 43 -------------- arch/mips/lantiq/xway/ebu.c | 4 -- arch/mips/lantiq/xway/reset.c | 29 +++++----- 10 files changed, 293 insertions(+), 77 deletions(-) create mode 100644 arch/mips/lantiq/dts/Makefile create mode 100644 arch/mips/lantiq/dts/danube.dtsi create mode 100644 arch/mips/lantiq/dts/easy50712.dts delete mode 100644 arch/mips/lantiq/setup.c (limited to 'arch/mips/lantiq') diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 2780461e3258..9485fe54752b 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -18,4 +18,13 @@ config SOC_XWAY select HW_HAS_PCI endchoice + +choice + prompt "Devicetree" + +config DT_EASY50712 + bool "Easy50712" + depends on SOC_XWAY +endchoice + endif diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile index a268391eb45e..16f1c758616b 100644 --- a/arch/mips/lantiq/Makefile +++ b/arch/mips/lantiq/Makefile @@ -4,7 +4,9 @@ # under the terms of the GNU General Public License version 2 as published # by the Free Software Foundation. -obj-y := irq.o setup.o clk.o prom.o +obj-y := irq.o clk.o prom.o + +obj-y += dts/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/mips/lantiq/dts/Makefile b/arch/mips/lantiq/dts/Makefile new file mode 100644 index 000000000000..674fca45f72d --- /dev/null +++ b/arch/mips/lantiq/dts/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o + +$(obj)/%.dtb: $(obj)/%.dts + $(call if_changed,dtc) diff --git a/arch/mips/lantiq/dts/danube.dtsi b/arch/mips/lantiq/dts/danube.dtsi new file mode 100644 index 000000000000..3a4520f009cf --- /dev/null +++ b/arch/mips/lantiq/dts/danube.dtsi @@ -0,0 +1,105 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,danube"; + + cpus { + cpu@0 { + compatible = "mips,mips24Kc"; + }; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x120>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + }; + + serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + pci0: pci@E105400 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + }; + }; +}; diff --git a/arch/mips/lantiq/dts/easy50712.dts b/arch/mips/lantiq/dts/easy50712.dts new file mode 100644 index 000000000000..68c17310bc82 --- /dev/null +++ b/arch/mips/lantiq/dts/easy50712.dts @@ -0,0 +1,113 @@ +/dts-v1/; + +/include/ "danube.dtsi" + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73 78>; + phy-mode = "rmii"; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + stp0: stp@E100BB0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xE100BB0 0x40>; + + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + }; + + pci@E105400 { + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 + >; + gpios-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + }; + + }; +}; diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index cd568921f191..413ed53a4ae1 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -8,6 +8,7 @@ #include #include +#include #include #include @@ -16,13 +17,15 @@ #include "prom.h" #include "clk.h" -static struct ltq_soc_info soc_info; +/* access to the ebu needs to be locked between different drivers */ +DEFINE_SPINLOCK(ebu_lock); +EXPORT_SYMBOL_GPL(ebu_lock); -unsigned int ltq_get_cpu_ver(void) -{ - return soc_info.rev; -} -EXPORT_SYMBOL(ltq_get_cpu_ver); +/* + * this struct is filled by the soc specific detection code and holds + * information about the specific soc type, revision and name + */ +static struct ltq_soc_info soc_info; unsigned int ltq_get_soc_type(void) { @@ -57,16 +60,28 @@ static void __init prom_init_cmdline(void) } } -void __init prom_init(void) +void __init plat_mem_setup(void) { - struct clk *clk; + ioport_resource.start = IOPORT_RESOURCE_START; + ioport_resource.end = IOPORT_RESOURCE_END; + iomem_resource.start = IOMEM_RESOURCE_START; + iomem_resource.end = IOMEM_RESOURCE_END; + + set_io_port_base((unsigned long) KSEG1); + + /* + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ + __dt_setup_arch(&__dtb_start); +} +void __init prom_init(void) +{ + /* call the soc specific detetcion code and get it to fill soc_info */ ltq_soc_detect(&soc_info); - clk_init(); - clk = clk_get(0, "cpu"); - snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d", - soc_info.name, soc_info.rev); - clk_put(clk); + snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s", + soc_info.name, soc_info.rev_type); soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0'; pr_info("SoC: %s\n", soc_info.sys_type); prom_init_cmdline(); @@ -76,3 +91,19 @@ void __init prom_init(void) panic("failed to register_vsmp_smp_ops()"); #endif } + +int __init plat_of_setup(void) +{ + static struct of_device_id of_ids[3]; + + if (!of_have_populated_dt()) + panic("device tree not present"); + + strncpy(of_ids[0].compatible, soc_info.compatible, + sizeof(of_ids[0].compatible)); + strncpy(of_ids[1].compatible, "simple-bus", + sizeof(of_ids[1].compatible)); + return of_platform_bus_probe(NULL, of_ids, NULL); +} + +arch_initcall(plat_of_setup); diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h index f7c2a7984db7..a3fa1a2bfaae 100644 --- a/arch/mips/lantiq/prom.h +++ b/arch/mips/lantiq/prom.h @@ -26,4 +26,6 @@ struct ltq_soc_info { extern void ltq_soc_detect(struct ltq_soc_info *i); extern void ltq_soc_init(void); +extern struct boot_param_header __dtb_start; + #endif diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c deleted file mode 100644 index f1c605ab8081..000000000000 --- a/arch/mips/lantiq/setup.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin - */ - -#include -#include -#include -#include -#include - -#include - -#include "prom.h" - -void __init plat_mem_setup(void) -{ - /* assume 16M as default incase uboot fails to pass proper ramsize */ - unsigned long memsize = 16; - char **envp = (char **) KSEG1ADDR(fw_arg2); - - ioport_resource.start = IOPORT_RESOURCE_START; - ioport_resource.end = IOPORT_RESOURCE_END; - iomem_resource.start = IOMEM_RESOURCE_START; - iomem_resource.end = IOMEM_RESOURCE_END; - - set_io_port_base((unsigned long) KSEG1); - - while (*envp) { - char *e = (char *)KSEG1ADDR(*envp); - if (!strncmp(e, "memsize=", 8)) { - e += 8; - if (strict_strtoul(e, 0, &memsize)) - pr_warn("bad memsize specified\n"); - } - envp++; - } - memsize *= 1024 * 1024; - add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c index 862e3e830680..419b47b70f32 100644 --- a/arch/mips/lantiq/xway/ebu.c +++ b/arch/mips/lantiq/xway/ebu.c @@ -14,10 +14,6 @@ #include -/* all access to the ebu must be locked */ -DEFINE_SPINLOCK(ebu_lock); -EXPORT_SYMBOL_GPL(ebu_lock); - static struct resource ltq_ebu_resource = { .name = "ebu", .start = LTQ_EBU_BASE_ADDR, diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c index 3327211746ac..22c55f73aa9d 100644 --- a/arch/mips/lantiq/xway/reset.c +++ b/arch/mips/lantiq/xway/reset.c @@ -37,13 +37,6 @@ #define RCU_BOOT_SEL_SHIFT 26 #define RCU_BOOT_SEL_MASK 0x7 -static struct resource ltq_rcu_resource = { - .name = "rcu", - .start = LTQ_RCU_BASE_ADDR, - .end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - /* remapped base addr of the reset control unit */ static void __iomem *ltq_rcu_membase; @@ -91,17 +84,21 @@ static void ltq_machine_power_off(void) static int __init mips_reboot_setup(void) { - /* insert and request the memory region */ - if (insert_resource(&iomem_resource, <q_rcu_resource) < 0) - panic("Failed to insert rcu memory"); + struct resource res; + struct device_node *np = + of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); + + /* check if all the reset register range is available */ + if (!np) + panic("Failed to load reset resources from devicetree"); + + if (of_address_to_resource(np, 0, &res)) + panic("Failed to get rcu memory range"); - if (request_mem_region(ltq_rcu_resource.start, - resource_size(<q_rcu_resource), "rcu") < 0) - panic("Failed to request rcu memory"); + if (request_mem_region(res.start, resource_size(&res), res.name) < 0) + pr_err("Failed to request rcu memory"); - /* remap rcu register range */ - ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start, - resource_size(<q_rcu_resource)); + ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res)); if (!ltq_rcu_membase) panic("Failed to remap core memory"); -- cgit v1.2.3-59-g8ed1b