From 61c610ec61bb334ba97cddaf352c95b9371d2a23 Mon Sep 17 00:00:00 2001 From: Chee Nouk Phoon Date: Tue, 8 Sep 2015 18:07:44 +0800 Subject: nios2: Add Max10 device tree Max10 is a FPGA device. This patch adds Nios2 support for Max10. This device tree is based on Max10 hardware reference design. Signed-off-by: Chee Nouk Phoon Signed-off-by: Ley Foon Tan --- arch/nios2/boot/dts/10m50_devboard.dts | 248 +++++++++++++++++++++++++++++++++ 1 file changed, 248 insertions(+) create mode 100755 arch/nios2/boot/dts/10m50_devboard.dts (limited to 'arch/nios2/boot/dts/10m50_devboard.dts') diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts new file mode 100755 index 000000000000..3e411c644824 --- /dev/null +++ b/arch/nios2/boot/dts/10m50_devboard.dts @@ -0,0 +1,248 @@ +/* + * Copyright (C) 2015 Altera Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +/dts-v1/; + +/ { + model = "Altera NiosII Max10"; + compatible = "altr,niosii-max10"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "altr,nios2-1.1"; + reg = <0x00000000>; + interrupt-controller; + #interrupt-cells = <1>; + altr,exception-addr = <0xc8000120>; + altr,fast-tlb-miss-addr = <0xc0000100>; + altr,has-div = <1>; + altr,has-initda = <1>; + altr,has-mmu = <1>; + altr,has-mul = <1>; + altr,implementation = "fast"; + altr,pid-num-bits = <8>; + altr,reset-addr = <0xd4000000>; + altr,tlb-num-entries = <256>; + altr,tlb-num-ways = <16>; + altr,tlb-ptr-sz = <8>; + clock-frequency = <75000000>; + dcache-line-size = <32>; + dcache-size = <32768>; + icache-line-size = <32>; + icache-size = <32768>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x08000000 0x08000000>, + <0x00000000 0x00000400>; + }; + + sopc0: sopc@0 { + device_type = "soc"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + compatible = "altr,avalon", "simple-bus"; + bus-frequency = <75000000>; + + jtag_uart: serial@18001530 { + compatible = "altr,juart-1.0"; + reg = <0x18001530 0x00000008>; + interrupt-parent = <&cpu>; + interrupts = <7>; + }; + + a_16550_uart_0: serial@18001600 { + compatible = "altr,16550-FIFO32", "ns16550a"; + reg = <0x18001600 0x00000200>; + interrupt-parent = <&cpu>; + interrupts = <1>; + auto-flow-control = <1>; + clock-frequency = <50000000>; + fifo-size = <32>; + reg-io-width = <4>; + reg-shift = <2>; + }; + + sysid: sysid@18001528 { + compatible = "altr,sysid-1.0"; + reg = <0x18001528 0x00000008>; + id = <4207856382>; + timestamp = <1431309290>; + }; + + rgmii_0_eth_tse_0: ethernet@400 { + compatible = "altr,tse-msgdma-1.0", "altr,tse-1.0"; + reg = <0x00000400 0x00000400>, + <0x00000820 0x00000020>, + <0x00000800 0x00000020>, + <0x000008c0 0x00000008>, + <0x00000840 0x00000020>, + <0x00000860 0x00000020>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc"; + interrupt-parent = <&cpu>; + interrupts = <2 3>; + interrupt-names = "rx_irq", "tx_irq"; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + address-bits = <48>; + max-frame-size = <1518>; + local-mac-address = [00 00 00 00 00 00]; + altr,has-supplementary-unicast; + altr,enable-sup-addr = <1>; + altr,has-hash-multicast-filter; + altr,enable-hash = <1>; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + rgmii_0_eth_tse_0_mdio: mdio { + compatible = "altr,tse-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; + }; + }; + + enet_pll: clock@0 { + compatible = "altr,pll-1.0"; + #clock-cells = <1>; + + enet_pll_c0: enet_pll_c0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "enet_pll-c0"; + }; + + enet_pll_c1: enet_pll_c1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "enet_pll-c1"; + }; + + enet_pll_c2: enet_pll_c2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2500000>; + clock-output-names = "enet_pll-c2"; + }; + }; + + sys_pll: clock@1 { + compatible = "altr,pll-1.0"; + #clock-cells = <1>; + + sys_pll_c0: sys_pll_c0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sys_pll-c0"; + }; + + sys_pll_c1: sys_pll_c1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "sys_pll-c1"; + }; + + sys_pll_c2: sys_pll_c2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <75000000>; + clock-output-names = "sys_pll-c2"; + }; + }; + + sys_clk_timer: timer@18001440 { + compatible = "altr,timer-1.0"; + reg = <0x18001440 0x00000020>; + interrupt-parent = <&cpu>; + interrupts = <0>; + clock-frequency = <75000000>; + }; + + led_pio: gpio@180014d0 { + compatible = "altr,pio-1.0"; + reg = <0x180014d0 0x00000010>; + altr,gpio-bank-width = <4>; + resetvalue = <15>; + #gpio-cells = <2>; + gpio-controller; + }; + + button_pio: gpio@180014c0 { + compatible = "altr,pio-1.0"; + reg = <0x180014c0 0x00000010>; + interrupt-parent = <&cpu>; + interrupts = <6>; + altr,gpio-bank-width = <3>; + altr,interrupt-type = <2>; + edge_type = <1>; + level_trigger = <0>; + resetvalue = <0>; + #gpio-cells = <2>; + gpio-controller; + }; + + sys_clk_timer_1: timer@880 { + compatible = "altr,timer-1.0"; + reg = <0x00000880 0x00000020>; + interrupt-parent = <&cpu>; + interrupts = <5>; + clock-frequency = <75000000>; + }; + + fpga_leds: leds { + compatible = "gpio-leds"; + + led_fpga0: fpga0 { + label = "fpga_led0"; + gpios = <&led_pio 0 1>; + }; + + led_fpga1: fpga1 { + label = "fpga_led1"; + gpios = <&led_pio 1 1>; + }; + + led_fpga2: fpga2 { + label = "fpga_led2"; + gpios = <&led_pio 2 1>; + }; + + led_fpga3: fpga3 { + label = "fpga_led3"; + gpios = <&led_pio 3 1>; + }; + }; + }; + + chosen { + bootargs = "debug console=ttyS0,115200"; + }; +}; -- cgit v1.2.3-59-g8ed1b