From 0fbbeba2427a842a1a4ac9f379ca2ca37ea907eb Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Mon, 26 Mar 2007 21:40:29 -0800 Subject: [POWERPC] Ocotea board: ntpd complains that the frequency error exceeds the tolerance Lifted from http://bugzilla.kernel.org/show_bug.cgi?id=8182 Steps to reproduce: - Boot an Ocotea board with the mainline 2.6.20.1 kernel. - Create an /etc/ntp.conf file with at least one NTP server and iburst mode set. - Issue the command "ntpd -g". - Wait about two minutes. - Verify ntpd's status via "ntpq -pn" and by looking in /var/log/ntp. This fixes this problem by adjusting the expected clock frequency. Cc: Kumar Gala Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/ppc/platforms/4xx/ocotea.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/ppc/platforms/4xx/ocotea.c') diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index c8017c9f1326..5e994e146ba8 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -289,7 +289,7 @@ ocotea_setup_arch(void) * from FPGA, because it can be changed by on-board switches * --ebs */ - ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ibm440gx_get_clocks(&clocks, 33300000, 6 * 1843200); ocp_sys_info.opb_bus_freq = clocks.opb; /* Setup TODC access */ -- cgit v1.2.3-59-g8ed1b