From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/ppc/syslib/open_pic.c | 1083 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1083 insertions(+) create mode 100644 arch/ppc/syslib/open_pic.c (limited to 'arch/ppc/syslib/open_pic.c') diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c new file mode 100644 index 000000000000..406f36a8a681 --- /dev/null +++ b/arch/ppc/syslib/open_pic.c @@ -0,0 +1,1083 @@ +/* + * arch/ppc/kernel/open_pic.c -- OpenPIC Interrupt Handling + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "open_pic_defs.h" + +#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx) +#define OPENPIC_BIG_ENDIAN +#endif + +void __iomem *OpenPIC_Addr; +static volatile struct OpenPIC __iomem *OpenPIC = NULL; + +/* + * We define OpenPIC_InitSenses table thusly: + * bit 0x1: sense, 0 for edge and 1 for level. + * bit 0x2: polarity, 0 for negative, 1 for positive. + */ +u_int OpenPIC_NumInitSenses __initdata = 0; +u_char *OpenPIC_InitSenses __initdata = NULL; +extern int use_of_interrupt_tree; + +static u_int NumProcessors; +static u_int NumSources; +static int open_pic_irq_offset; +static volatile OpenPIC_Source __iomem *ISR[NR_IRQS]; +static int openpic_cascade_irq = -1; +static int (*openpic_cascade_fn)(struct pt_regs *); + +/* Global Operations */ +static void openpic_disable_8259_pass_through(void); +static void openpic_set_spurious(u_int vector); + +#ifdef CONFIG_SMP +/* Interprocessor Interrupts */ +static void openpic_initipi(u_int ipi, u_int pri, u_int vector); +static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *); +#endif + +/* Timer Interrupts */ +static void openpic_inittimer(u_int timer, u_int pri, u_int vector); +static void openpic_maptimer(u_int timer, cpumask_t cpumask); + +/* Interrupt Sources */ +static void openpic_enable_irq(u_int irq); +static void openpic_disable_irq(u_int irq); +static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity, + int is_level); +static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask); + +/* + * These functions are not used but the code is kept here + * for completeness and future reference. + */ +#ifdef notused +static void openpic_enable_8259_pass_through(void); +static u_int openpic_get_priority(void); +static u_int openpic_get_spurious(void); +static void openpic_set_sense(u_int irq, int sense); +#endif /* notused */ + +/* + * Description of the openpic for the higher-level irq code + */ +static void openpic_end_irq(unsigned int irq_nr); +static void openpic_ack_irq(unsigned int irq_nr); +static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask); + +struct hw_interrupt_type open_pic = { + .typename = " OpenPIC ", + .enable = openpic_enable_irq, + .disable = openpic_disable_irq, + .ack = openpic_ack_irq, + .end = openpic_end_irq, + .set_affinity = openpic_set_affinity, +}; + +#ifdef CONFIG_SMP +static void openpic_end_ipi(unsigned int irq_nr); +static void openpic_ack_ipi(unsigned int irq_nr); +static void openpic_enable_ipi(unsigned int irq_nr); +static void openpic_disable_ipi(unsigned int irq_nr); + +struct hw_interrupt_type open_pic_ipi = { + .typename = " OpenPIC ", + .enable = openpic_enable_ipi, + .disable = openpic_disable_ipi, + .ack = openpic_ack_ipi, + .end = openpic_end_ipi, +}; +#endif /* CONFIG_SMP */ + +/* + * Accesses to the current processor's openpic registers + */ +#ifdef CONFIG_SMP +#define THIS_CPU Processor[cpu] +#define DECL_THIS_CPU int cpu = smp_hw_index[smp_processor_id()] +#define CHECK_THIS_CPU check_arg_cpu(cpu) +#else +#define THIS_CPU Processor[0] +#define DECL_THIS_CPU +#define CHECK_THIS_CPU +#endif /* CONFIG_SMP */ + +#if 1 +#define check_arg_ipi(ipi) \ + if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \ + printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi); +#define check_arg_timer(timer) \ + if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \ + printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer); +#define check_arg_vec(vec) \ + if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \ + printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec); +#define check_arg_pri(pri) \ + if (pri < 0 || pri >= OPENPIC_NUM_PRI) \ + printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri); +/* + * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's + * data has probably been corrupted and we're going to panic or deadlock later + * anyway --Troy + */ +#define check_arg_irq(irq) \ + if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \ + || ISR[irq - open_pic_irq_offset] == 0) { \ + printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \ + dump_stack(); } +#define check_arg_cpu(cpu) \ + if (cpu < 0 || cpu >= NumProcessors){ \ + printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \ + dump_stack(); } +#else +#define check_arg_ipi(ipi) do {} while (0) +#define check_arg_timer(timer) do {} while (0) +#define check_arg_vec(vec) do {} while (0) +#define check_arg_pri(pri) do {} while (0) +#define check_arg_irq(irq) do {} while (0) +#define check_arg_cpu(cpu) do {} while (0) +#endif + +u_int openpic_read(volatile u_int __iomem *addr) +{ + u_int val; + +#ifdef OPENPIC_BIG_ENDIAN + val = in_be32(addr); +#else + val = in_le32(addr); +#endif + return val; +} + +static inline void openpic_write(volatile u_int __iomem *addr, u_int val) +{ +#ifdef OPENPIC_BIG_ENDIAN + out_be32(addr, val); +#else + out_le32(addr, val); +#endif +} + +static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask) +{ + u_int val = openpic_read(addr); + return val & mask; +} + +inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask, + u_int field) +{ + u_int val = openpic_read(addr); + openpic_write(addr, (val & ~mask) | (field & mask)); +} + +static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask) +{ + openpic_writefield(addr, mask, 0); +} + +static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask) +{ + openpic_writefield(addr, mask, mask); +} + +static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask, + u_int field) +{ + openpic_setfield(addr, OPENPIC_MASK); + while (openpic_read(addr) & OPENPIC_ACTIVITY); + openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK); +} + +#ifdef CONFIG_SMP +/* yes this is right ... bug, feature, you decide! -- tgall */ +u_int openpic_read_IPI(volatile u_int __iomem * addr) +{ + u_int val = 0; +#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3) + val = in_be32(addr); +#else + val = in_le32(addr); +#endif + return val; +} + +/* because of the power3 be / le above, this is needed */ +inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field) +{ + u_int val = openpic_read_IPI(addr); + openpic_write(addr, (val & ~mask) | (field & mask)); +} + +static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask) +{ + openpic_writefield_IPI(addr, mask, 0); +} + +static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask) +{ + openpic_writefield_IPI(addr, mask, mask); +} + +static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field) +{ + openpic_setfield_IPI(addr, OPENPIC_MASK); + + /* wait until it's not in use */ + /* BenH: Is this code really enough ? I would rather check the result + * and eventually retry ... + */ + while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY); + + openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK); +} +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_EPIC_SERIAL_MODE +/* On platforms that may use EPIC serial mode, the default is enabled. */ +int epic_serial_mode = 1; + +static void __init openpic_eicr_set_clk(u_int clkval) +{ + openpic_writefield(&OpenPIC->Global.Global_Configuration1, + OPENPIC_EICR_S_CLK_MASK, (clkval << 28)); +} + +static void __init openpic_enable_sie(void) +{ + openpic_setfield(&OpenPIC->Global.Global_Configuration1, + OPENPIC_EICR_SIE); +} +#endif + +#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM) +static void openpic_reset(void) +{ + openpic_setfield(&OpenPIC->Global.Global_Configuration0, + OPENPIC_CONFIG_RESET); + while (openpic_readfield(&OpenPIC->Global.Global_Configuration0, + OPENPIC_CONFIG_RESET)) + mb(); +} +#endif + +void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR) +{ + volatile OpenPIC_Source __iomem *src = first_ISR; + int i, last_irq; + + last_irq = first_irq + num_irqs; + if (last_irq > NumSources) + NumSources = last_irq; + if (src == 0) + src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq]; + for (i = first_irq; i < last_irq; ++i, ++src) + ISR[i] = src; +} + +/* + * The `offset' parameter defines where the interrupts handled by the + * OpenPIC start in the space of interrupt numbers that the kernel knows + * about. In other words, the OpenPIC's IRQ0 is numbered `offset' in the + * kernel's interrupt numbering scheme. + * We assume there is only one OpenPIC. + */ +void __init openpic_init(int offset) +{ + u_int t, i; + u_int timerfreq; + const char *version; + + if (!OpenPIC_Addr) { + printk("No OpenPIC found !\n"); + return; + } + OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr; + +#ifdef CONFIG_EPIC_SERIAL_MODE + /* Have to start from ground zero. + */ + openpic_reset(); +#endif + + if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122); + + t = openpic_read(&OpenPIC->Global.Feature_Reporting0); + switch (t & OPENPIC_FEATURE_VERSION_MASK) { + case 1: + version = "1.0"; + break; + case 2: + version = "1.2"; + break; + case 3: + version = "1.3"; + break; + default: + version = "?"; + break; + } + NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >> + OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1; + if (NumSources == 0) + openpic_set_sources(0, + ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >> + OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1, + NULL); + printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n", + version, NumProcessors, NumSources, OpenPIC); + timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency); + if (timerfreq) + printk("OpenPIC timer frequency is %d.%06d MHz\n", + timerfreq / 1000000, timerfreq % 1000000); + + open_pic_irq_offset = offset; + + /* Initialize timer interrupts */ + if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba); + for (i = 0; i < OPENPIC_NUM_TIMERS; i++) { + /* Disabled, Priority 0 */ + openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset); + /* No processor */ + openpic_maptimer(i, CPU_MASK_NONE); + } + +#ifdef CONFIG_SMP + /* Initialize IPI interrupts */ + if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb); + for (i = 0; i < OPENPIC_NUM_IPI; i++) { + /* Disabled, Priority 10..13 */ + openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+offset); + /* IPIs are per-CPU */ + irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU; + irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi; + } +#endif + + /* Initialize external interrupts */ + if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc); + + openpic_set_priority(0xf); + + /* Init all external sources, including possibly the cascade. */ + for (i = 0; i < NumSources; i++) { + int sense; + + if (ISR[i] == 0) + continue; + + /* the bootloader may have left it enabled (bad !) */ + openpic_disable_irq(i+offset); + + sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE); + + if (sense & IRQ_SENSE_MASK) + irq_desc[i+offset].status = IRQ_LEVEL; + + /* Enabled, Priority 8 */ + openpic_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK), + (sense & IRQ_SENSE_MASK)); + /* Processor 0 */ + openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE); + } + + /* Init descriptors */ + for (i = offset; i < NumSources + offset; i++) + irq_desc[i].handler = &open_pic; + + /* Initialize the spurious interrupt */ + if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd); + openpic_set_spurious(OPENPIC_VEC_SPURIOUS); + openpic_disable_8259_pass_through(); +#ifdef CONFIG_EPIC_SERIAL_MODE + if (epic_serial_mode) { + openpic_eicr_set_clk(7); /* Slowest value until we know better */ + openpic_enable_sie(); + } +#endif + openpic_set_priority(0); + + if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222); +} + +#ifdef notused +static void openpic_enable_8259_pass_through(void) +{ + openpic_clearfield(&OpenPIC->Global.Global_Configuration0, + OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE); +} +#endif /* notused */ + +static void openpic_disable_8259_pass_through(void) +{ + openpic_setfield(&OpenPIC->Global.Global_Configuration0, + OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE); +} + +/* + * Find out the current interrupt + */ +u_int openpic_irq(void) +{ + u_int vec; + DECL_THIS_CPU; + + CHECK_THIS_CPU; + vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge, + OPENPIC_VECTOR_MASK); + return vec; +} + +void openpic_eoi(void) +{ + DECL_THIS_CPU; + + CHECK_THIS_CPU; + openpic_write(&OpenPIC->THIS_CPU.EOI, 0); + /* Handle PCI write posting */ + (void)openpic_read(&OpenPIC->THIS_CPU.EOI); +} + +#ifdef notused +static u_int openpic_get_priority(void) +{ + DECL_THIS_CPU; + + CHECK_THIS_CPU; + return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority, + OPENPIC_CURRENT_TASK_PRIORITY_MASK); +} +#endif /* notused */ + +void openpic_set_priority(u_int pri) +{ + DECL_THIS_CPU; + + CHECK_THIS_CPU; + check_arg_pri(pri); + openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority, + OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri); +} + +/* + * Get/set the spurious vector + */ +#ifdef notused +static u_int openpic_get_spurious(void) +{ + return openpic_readfield(&OpenPIC->Global.Spurious_Vector, + OPENPIC_VECTOR_MASK); +} +#endif /* notused */ + +static void openpic_set_spurious(u_int vec) +{ + check_arg_vec(vec); + openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK, + vec); +} + +#ifdef CONFIG_SMP +/* + * Convert a cpu mask from logical to physical cpu numbers. + */ +static inline cpumask_t physmask(cpumask_t cpumask) +{ + int i; + cpumask_t mask = CPU_MASK_NONE; + + cpus_and(cpumask, cpu_online_map, cpumask); + + for (i = 0; i < NR_CPUS; i++) + if (cpu_isset(i, cpumask)) + cpu_set(smp_hw_index[i], mask); + + return mask; +} +#else +#define physmask(cpumask) (cpumask) +#endif + +void openpic_reset_processor_phys(u_int mask) +{ + openpic_write(&OpenPIC->Global.Processor_Initialization, mask); +} + +#if defined(CONFIG_SMP) || defined(CONFIG_PM) +static DEFINE_SPINLOCK(openpic_setup_lock); +#endif + +#ifdef CONFIG_SMP +/* + * Initialize an interprocessor interrupt (and disable it) + * + * ipi: OpenPIC interprocessor interrupt number + * pri: interrupt source priority + * vec: the vector it will produce + */ +static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec) +{ + check_arg_ipi(ipi); + check_arg_pri(pri); + check_arg_vec(vec); + openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi), + OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK, + (pri << OPENPIC_PRIORITY_SHIFT) | vec); +} + +/* + * Send an IPI to one or more CPUs + * + * Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI) + * and not a system-wide interrupt number + */ +void openpic_cause_IPI(u_int ipi, cpumask_t cpumask) +{ + cpumask_t phys; + DECL_THIS_CPU; + + CHECK_THIS_CPU; + check_arg_ipi(ipi); + phys = physmask(cpumask); + openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi), + cpus_addr(physmask(cpumask))[0]); +} + +void openpic_request_IPIs(void) +{ + int i; + + /* + * Make sure this matches what is defined in smp.c for + * smp_message_{pass|recv}() or what shows up in + * /proc/interrupts will be wrong!!! --Troy */ + + if (OpenPIC == NULL) + return; + + /* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */ + request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset, + openpic_ipi_action, SA_INTERRUPT, + "IPI0 (call function)", NULL); + request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1, + openpic_ipi_action, SA_INTERRUPT, + "IPI1 (reschedule)", NULL); + request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2, + openpic_ipi_action, SA_INTERRUPT, + "IPI2 (invalidate tlb)", NULL); + request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3, + openpic_ipi_action, SA_INTERRUPT, + "IPI3 (xmon break)", NULL); + + for ( i = 0; i < OPENPIC_NUM_IPI ; i++ ) + openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i); +} + +/* + * Do per-cpu setup for SMP systems. + * + * Get IPI's working and start taking interrupts. + * -- Cort + */ + +void __devinit do_openpic_setup_cpu(void) +{ +#ifdef CONFIG_IRQ_ALL_CPUS + int i; + cpumask_t msk = CPU_MASK_NONE; +#endif + spin_lock(&openpic_setup_lock); + +#ifdef CONFIG_IRQ_ALL_CPUS + cpu_set(smp_hw_index[smp_processor_id()], msk); + + /* let the openpic know we want intrs. default affinity + * is 0xffffffff until changed via /proc + * That's how it's done on x86. If we want it differently, then + * we should make sure we also change the default values of irq_affinity + * in irq.c. + */ + for (i = 0; i < NumSources; i++) + openpic_mapirq(i, msk, CPU_MASK_ALL); +#endif /* CONFIG_IRQ_ALL_CPUS */ + openpic_set_priority(0); + + spin_unlock(&openpic_setup_lock); +} +#endif /* CONFIG_SMP */ + +/* + * Initialize a timer interrupt (and disable it) + * + * timer: OpenPIC timer number + * pri: interrupt source priority + * vec: the vector it will produce + */ +static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec) +{ + check_arg_timer(timer); + check_arg_pri(pri); + check_arg_vec(vec); + openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority, + OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK, + (pri << OPENPIC_PRIORITY_SHIFT) | vec); +} + +/* + * Map a timer interrupt to one or more CPUs + */ +static void __init openpic_maptimer(u_int timer, cpumask_t cpumask) +{ + cpumask_t phys = physmask(cpumask); + check_arg_timer(timer); + openpic_write(&OpenPIC->Global.Timer[timer].Destination, + cpus_addr(phys)[0]); +} + +/* + * Initalize the interrupt source which will generate an NMI. + * This raises the interrupt's priority from 8 to 9. + * + * irq: The logical IRQ which generates an NMI. + */ +void __init +openpic_init_nmi_irq(u_int irq) +{ + check_arg_irq(irq); + openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority, + OPENPIC_PRIORITY_MASK, + 9 << OPENPIC_PRIORITY_SHIFT); +} + +/* + * + * All functions below take an offset'ed irq argument + * + */ + +/* + * Hookup a cascade to the OpenPIC. + */ + +static struct irqaction openpic_cascade_irqaction = { + .handler = no_action, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, +}; + +void __init +openpic_hookup_cascade(u_int irq, char *name, + int (*cascade_fn)(struct pt_regs *)) +{ + openpic_cascade_irq = irq; + openpic_cascade_fn = cascade_fn; + + if (setup_irq(irq, &openpic_cascade_irqaction)) + printk("Unable to get OpenPIC IRQ %d for cascade\n", + irq - open_pic_irq_offset); +} + +/* + * Enable/disable an external interrupt source + * + * Externally called, irq is an offseted system-wide interrupt number + */ +static void openpic_enable_irq(u_int irq) +{ + volatile u_int __iomem *vpp; + + check_arg_irq(irq); + vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority; + openpic_clearfield(vpp, OPENPIC_MASK); + /* make sure mask gets to controller before we return to user */ + do { + mb(); /* sync is probably useless here */ + } while (openpic_readfield(vpp, OPENPIC_MASK)); +} + +static void openpic_disable_irq(u_int irq) +{ + volatile u_int __iomem *vpp; + u32 vp; + + check_arg_irq(irq); + vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority; + openpic_setfield(vpp, OPENPIC_MASK); + /* make sure mask gets to controller before we return to user */ + do { + mb(); /* sync is probably useless here */ + vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY); + } while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK)); +} + +#ifdef CONFIG_SMP +/* + * Enable/disable an IPI interrupt source + * + * Externally called, irq is an offseted system-wide interrupt number + */ +void openpic_enable_ipi(u_int irq) +{ + irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset); + check_arg_ipi(irq); + openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK); + +} + +void openpic_disable_ipi(u_int irq) +{ + irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset); + check_arg_ipi(irq); + openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK); +} +#endif + +/* + * Initialize an interrupt source (and disable it!) + * + * irq: OpenPIC interrupt number + * pri: interrupt source priority + * vec: the vector it will produce + * pol: polarity (1 for positive, 0 for negative) + * sense: 1 for level, 0 for edge + */ +static void __init +openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense) +{ + openpic_safe_writefield(&ISR[irq]->Vector_Priority, + OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK | + OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK, + (pri << OPENPIC_PRIORITY_SHIFT) | vec | + (pol ? OPENPIC_POLARITY_POSITIVE : + OPENPIC_POLARITY_NEGATIVE) | + (sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE)); +} + +/* + * Map an interrupt source to one or more CPUs + */ +static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask) +{ + if (ISR[irq] == 0) + return; + if (!cpus_empty(keepmask)) { + cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) }; + cpus_and(irqdest, irqdest, keepmask); + cpus_or(physmask, physmask, irqdest); + } + openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]); +} + +#ifdef notused +/* + * Set the sense for an interrupt source (and disable it!) + * + * sense: 1 for level, 0 for edge + */ +static void openpic_set_sense(u_int irq, int sense) +{ + if (ISR[irq] != 0) + openpic_safe_writefield(&ISR[irq]->Vector_Priority, + OPENPIC_SENSE_LEVEL, + (sense ? OPENPIC_SENSE_LEVEL : 0)); +} +#endif /* notused */ + +/* No spinlocks, should not be necessary with the OpenPIC + * (1 register = 1 interrupt and we have the desc lock). + */ +static void openpic_ack_irq(unsigned int irq_nr) +{ +#ifdef __SLOW_VERSION__ + openpic_disable_irq(irq_nr); + openpic_eoi(); +#else + if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0) + openpic_eoi(); +#endif +} + +static void openpic_end_irq(unsigned int irq_nr) +{ +#ifdef __SLOW_VERSION__ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) + && irq_desc[irq_nr].action) + openpic_enable_irq(irq_nr); +#else + if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0) + openpic_eoi(); +#endif +} + +static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask) +{ + openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE); +} + +#ifdef CONFIG_SMP +static void openpic_ack_ipi(unsigned int irq_nr) +{ + openpic_eoi(); +} + +static void openpic_end_ipi(unsigned int irq_nr) +{ +} + +static irqreturn_t openpic_ipi_action(int cpl, void *dev_id, struct pt_regs *regs) +{ + smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset, regs); + return IRQ_HANDLED; +} + +#endif /* CONFIG_SMP */ + +int +openpic_get_irq(struct pt_regs *regs) +{ + int irq = openpic_irq(); + + /* + * Check for the cascade interrupt and call the cascaded + * interrupt controller function (usually i8259_irq) if so. + * This should move to irq.c eventually. -- paulus + */ + if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) { + int cirq = openpic_cascade_fn(regs); + + /* Allow for the cascade being shared with other devices */ + if (cirq != -1) { + irq = cirq; + openpic_eoi(); + } + } else if (irq == OPENPIC_VEC_SPURIOUS) + irq = -1; + return irq; +} + +#ifdef CONFIG_SMP +void +smp_openpic_message_pass(int target, int msg, unsigned long data, int wait) +{ + cpumask_t mask = CPU_MASK_ALL; + /* make sure we're sending something that translates to an IPI */ + if (msg > 0x3) { + printk("SMP %d: smp_message_pass: unknown msg %d\n", + smp_processor_id(), msg); + return; + } + switch (target) { + case MSG_ALL: + openpic_cause_IPI(msg, mask); + break; + case MSG_ALL_BUT_SELF: + cpu_clear(smp_processor_id(), mask); + openpic_cause_IPI(msg, mask); + break; + default: + openpic_cause_IPI(msg, cpumask_of_cpu(target)); + break; + } +} +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_PM + +/* + * We implement the IRQ controller as a sysdev and put it + * to sleep at powerdown stage (the callback is named suspend, + * but it's old semantics, for the Device Model, it's really + * powerdown). The possible problem is that another sysdev that + * happens to be suspend after this one will have interrupts off, + * that may be an issue... For now, this isn't an issue on pmac + * though... + */ + +static u32 save_ipi_vp[OPENPIC_NUM_IPI]; +static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES]; +static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES]; +static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS]; +static int openpic_suspend_count; + +static void openpic_cached_enable_irq(u_int irq) +{ + check_arg_irq(irq); + save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK; +} + +static void openpic_cached_disable_irq(u_int irq) +{ + check_arg_irq(irq); + save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK; +} + +/* WARNING: Can be called directly by the cpufreq code with NULL parameter, + * we need something better to deal with that... Maybe switch to S1 for + * cpufreq changes + */ +int openpic_suspend(struct sys_device *sysdev, u32 state) +{ + int i; + unsigned long flags; + + spin_lock_irqsave(&openpic_setup_lock, flags); + + if (openpic_suspend_count++ > 0) { + spin_unlock_irqrestore(&openpic_setup_lock, flags); + return 0; + } + + openpic_set_priority(0xf); + + open_pic.enable = openpic_cached_enable_irq; + open_pic.disable = openpic_cached_disable_irq; + + for (i=0; iProcessor[i].Current_Task_Priority); + openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority, + OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf); + } + + for (i=0; iGlobal.IPI_Vector_Priority(i)); + for (i=0; iVector_Priority) & ~OPENPIC_ACTIVITY; + save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination); + } + + spin_unlock_irqrestore(&openpic_setup_lock, flags); + + return 0; +} + +/* WARNING: Can be called directly by the cpufreq code with NULL parameter, + * we need something better to deal with that... Maybe switch to S1 for + * cpufreq changes + */ +int openpic_resume(struct sys_device *sysdev) +{ + int i; + unsigned long flags; + u32 vppmask = OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK | + OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK | + OPENPIC_MASK; + + spin_lock_irqsave(&openpic_setup_lock, flags); + + if ((--openpic_suspend_count) > 0) { + spin_unlock_irqrestore(&openpic_setup_lock, flags); + return 0; + } + + openpic_reset(); + + /* OpenPIC sometimes seem to need some time to be fully back up... */ + do { + openpic_set_spurious(OPENPIC_VEC_SPURIOUS); + } while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK) + != OPENPIC_VEC_SPURIOUS); + + openpic_disable_8259_pass_through(); + + for (i=0; iGlobal.IPI_Vector_Priority(i), + save_ipi_vp[i]); + for (i=0; iDestination, save_irq_src_dest[i]); + openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]); + /* make sure mask gets to controller before we return to user */ + do { + openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]); + } while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask) + != (save_irq_src_vp[i] & vppmask)); + } + for (i=0; iProcessor[i].Current_Task_Priority, + save_cpu_task_pri[i]); + + open_pic.enable = openpic_enable_irq; + open_pic.disable = openpic_disable_irq; + + openpic_set_priority(0); + + spin_unlock_irqrestore(&openpic_setup_lock, flags); + + return 0; +} + +#endif /* CONFIG_PM */ + +static struct sysdev_class openpic_sysclass = { + set_kset_name("openpic"), +}; + +static struct sys_device device_openpic = { + .id = 0, + .cls = &openpic_sysclass, +}; + +static struct sysdev_driver driver_openpic = { +#ifdef CONFIG_PM + .suspend = &openpic_suspend, + .resume = &openpic_resume, +#endif /* CONFIG_PM */ +}; + +static int __init init_openpic_sysfs(void) +{ + int rc; + + if (!OpenPIC_Addr) + return -ENODEV; + printk(KERN_DEBUG "Registering openpic with sysfs...\n"); + rc = sysdev_class_register(&openpic_sysclass); + if (rc) { + printk(KERN_ERR "Failed registering openpic sys class\n"); + return -ENODEV; + } + rc = sysdev_register(&device_openpic); + if (rc) { + printk(KERN_ERR "Failed registering openpic sys device\n"); + return -ENODEV; + } + rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic); + if (rc) { + printk(KERN_ERR "Failed registering openpic sys driver\n"); + return -ENODEV; + } + return 0; +} + +subsys_initcall(init_openpic_sysfs); + -- cgit v1.2.3-59-g8ed1b