From a8de5ce9895367191df9b30804a0c67cfcc9f27a Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Sat, 12 May 2007 05:42:54 +1000 Subject: [POWERPC] Spelling fixes: arch/ppc/ Spelling fixes in arch/ppc/. Signed-off-by: Simon Arlott Signed-off-by: Paul Mackerras --- arch/ppc/4xx_io/serial_sicc.c | 10 +++++----- arch/ppc/8xx_io/commproc.c | 2 +- arch/ppc/8xx_io/fec.c | 2 +- arch/ppc/boot/lib/vreset.c | 2 +- arch/ppc/boot/simple/m8xx_tty.c | 2 +- arch/ppc/boot/simple/misc-embedded.c | 2 +- arch/ppc/boot/simple/mpc52xx_tty.c | 2 +- arch/ppc/boot/simple/mv64x60_tty.c | 2 +- arch/ppc/boot/simple/rw4/stb.h | 2 +- arch/ppc/kernel/traps.c | 4 ++-- arch/ppc/mm/init.c | 2 +- arch/ppc/platforms/4xx/bubinga.c | 2 +- arch/ppc/platforms/4xx/ep405.c | 2 +- arch/ppc/platforms/4xx/ibmnp405h.h | 2 +- arch/ppc/platforms/4xx/sycamore.c | 2 +- arch/ppc/platforms/4xx/walnut.c | 2 +- arch/ppc/platforms/ev64360.c | 2 +- arch/ppc/platforms/hdpu.c | 2 +- arch/ppc/platforms/katana.c | 2 +- arch/ppc/platforms/mbx.h | 2 +- arch/ppc/platforms/mvme5100.h | 2 +- arch/ppc/platforms/pplus.h | 2 +- arch/ppc/platforms/prep_pci.c | 22 +++++++++++----------- arch/ppc/platforms/prep_setup.c | 6 +++--- arch/ppc/platforms/prpmc750.h | 2 +- arch/ppc/platforms/radstone_ppc7d.c | 2 +- arch/ppc/platforms/sandpoint.c | 8 ++++---- arch/ppc/syslib/harrier.c | 2 +- arch/ppc/syslib/hawk_common.c | 4 ++-- arch/ppc/syslib/m82xx_pci.c | 2 +- arch/ppc/syslib/mpc10x_common.c | 4 ++-- arch/ppc/syslib/mpc52xx_setup.c | 2 +- arch/ppc/syslib/mpc8xx_devices.c | 2 +- arch/ppc/syslib/mv64x60.c | 10 +++++----- arch/ppc/syslib/ocp.c | 2 +- arch/ppc/syslib/ppc403_pic.c | 2 +- arch/ppc/syslib/ppc405_pci.c | 2 +- arch/ppc/syslib/ppc4xx_dma.c | 2 +- arch/ppc/syslib/ppc85xx_rio.c | 4 ++-- arch/ppc/syslib/xilinx_pic.c | 2 +- 40 files changed, 67 insertions(+), 67 deletions(-) (limited to 'arch/ppc') diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c index e35483961b90..efa0a56e230b 100644 --- a/arch/ppc/4xx_io/serial_sicc.c +++ b/arch/ppc/4xx_io/serial_sicc.c @@ -3,7 +3,7 @@ * * Based on drivers/char/serial_amba.c, by ARM Ltd. * - * Copyright 2001 IBM Crop. + * Copyright 2001 IBM Corp. * Author: IBM China Research Lab * Yudong Yang * Yi Ge @@ -155,16 +155,16 @@ /* serial port transmit command register */ -#define _TxCR_ET_MASK 0x80 /* transmiter enable mask */ +#define _TxCR_ET_MASK 0x80 /* transmitter enable mask */ #define _TxCR_DME_MASK 0x60 /* dma mode mask */ #define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */ #define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */ #define _TxCR_SPE_MASK 0x04 /* stop/pause mask */ #define _TxCR_TB_MASK 0x02 /* transmit break mask */ -#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmiter enabled */ -#define _TxCR_DME_DISABLE 0x00 /* transmiter disabled, TBR intr disabled */ -#define _TxCR_DME_TBR 0x20 /* transmiter disabled, TBR intr enabled */ +#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmitter enabled */ +#define _TxCR_DME_DISABLE 0x00 /* transmitter disabled, TBR intr disabled */ +#define _TxCR_DME_TBR 0x20 /* transmitter disabled, TBR intr enabled */ #define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */ #define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */ diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index e2c6210f234b..7088428e1fe2 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -144,7 +144,7 @@ m8xx_cpm_reset(void) /* Set SDMA Bus Request priority 5. * On 860T, this also enables FEC priority 6. I am not sure - * this is what we realy want for some applications, but the + * this is what we really want for some applications, but the * manual recommends it. * Bit 25, FAM can also be set to use FEC aggressive mode (860T). */ diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c index 57a9a61e54b5..d38335d2d710 100644 --- a/arch/ppc/8xx_io/fec.c +++ b/arch/ppc/8xx_io/fec.c @@ -1878,7 +1878,7 @@ fec_restart(struct net_device *dev, int duplex) bdp--; bdp->cbd_sc |= BD_SC_WRAP; - /* ...and the same for transmmit. + /* ...and the same for transmit. */ bdp = fep->tx_bd_base; for (i=0; icmd_stat & SDMA_DESC_CMDSTAT_O) == 0) && (loop_count++ < RX_NUM_DESC)) { diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h index fd98ee0f843e..9afa5ab24d26 100644 --- a/arch/ppc/boot/simple/rw4/stb.h +++ b/arch/ppc/boot/simple/rw4/stb.h @@ -88,7 +88,7 @@ /*----------------------------------------------------------------------------+ | STB tasks, task stack sizes, and task priorities. The actual task priority | is 1 more than the specified number since priority 0 is reserved (system -| internaly adds 1 to supplied priority number). +| internally adds 1 to supplied priority number). +----------------------------------------------------------------------------*/ #define STB_IDLE_TASK_SS (5* 1024) #define STB_IDLE_TASK_PRIO 0 diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 810f7aa72e92..aea100be52c8 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -577,7 +577,7 @@ void program_check_exception(struct pt_regs *regs) * ESR_DST (!?) or 0. In the process of chasing this with the * hardware people - not sure if it can happen on any illegal * instruction or only on FP instructions, whether there is a - * pattern to occurences etc. -dgibson 31/Mar/2003 */ + * pattern to occurrences etc. -dgibson 31/Mar/2003 */ if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) { emulate_single_step(regs); return; @@ -860,7 +860,7 @@ void SPEFloatingPointException(struct pt_regs *regs) spefscr = current->thread.spefscr; fpexc_mode = current->thread.fpexc_mode; - /* Hardware does not neccessarily set sticky + /* Hardware does not necessarily set sticky * underflow/overflow/invalid flags */ if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) { code = FPE_FLTOVF; diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index c374e53ae03a..390dd1995c2a 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -48,7 +48,7 @@ #include "mmu_decl.h" #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) -/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */ +/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE)) #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" #endif diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c index 75857b38e894..1a7f075b754f 100644 --- a/arch/ppc/platforms/4xx/bubinga.c +++ b/arch/ppc/platforms/4xx/bubinga.c @@ -197,7 +197,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end workaround */ #ifdef DEBUG printk("PCI bridge regs after fixup \n"); diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c index e5adf9ba1fca..5aa295022804 100644 --- a/arch/ppc/platforms/4xx/ep405.c +++ b/arch/ppc/platforms/4xx/ep405.c @@ -130,7 +130,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end workaround */ #endif } diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h index 4aa8821b478b..08a6a7791903 100644 --- a/arch/ppc/platforms/4xx/ibmnp405h.h +++ b/arch/ppc/platforms/4xx/ibmnp405h.h @@ -80,7 +80,7 @@ #define DCRN_CPMFR_BASE 0x0B9 #define DCRN_CPMER_BASE 0x0B8 -/* CPM Clocking & Power Mangement defines */ +/* CPM Clocking & Power Management defines */ #define IBM_CPM_PCI 0x40000000 /* PCI */ #define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */ #define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */ diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c index c47493e344c2..8689f3e8ef3a 100644 --- a/arch/ppc/platforms/4xx/sycamore.c +++ b/arch/ppc/platforms/4xx/sycamore.c @@ -225,7 +225,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end workaround */ #ifdef DEBUG printk("PCI bridge regs after fixup \n"); diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c index f414d2d4c58e..2f9772340854 100644 --- a/arch/ppc/platforms/4xx/walnut.c +++ b/arch/ppc/platforms/4xx/walnut.c @@ -200,7 +200,7 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) hose->first_busno, PCI_SLOT(hose->first_busno), PCI_FUNC(hose->first_busno), bar, bar_response); } - /* end work arround */ + /* end work around */ #ifdef DEBUG printk("PCI bridge regs after fixup \n"); diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c index f87e06f6bab9..f8baf05f16ce 100644 --- a/arch/ppc/platforms/ev64360.c +++ b/arch/ppc/platforms/ev64360.c @@ -473,7 +473,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index d809e17aa536..ca5de13712fd 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -144,7 +144,7 @@ static void __init hdpu_setup_peripherals(void) /* Enable pipelining */ mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1 << 13)); - /* Enable Snoop Pipelineing */ + /* Enable Snoop Pipelining */ mv64x60_set_bits(&bh, MV64360_D_UNIT_CONTROL_HIGH, (1 << 24)); /* diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c index 720f8b3e2fbc..c289e9f1b251 100644 --- a/arch/ppc/platforms/katana.c +++ b/arch/ppc/platforms/katana.c @@ -880,7 +880,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/platforms/mbx.h b/arch/ppc/platforms/mbx.h index fe81ca4ea0a2..1cf36fa3592d 100644 --- a/arch/ppc/platforms/mbx.h +++ b/arch/ppc/platforms/mbx.h @@ -37,7 +37,7 @@ typedef struct bd_info { /* Memory map for the MBX as configured by EPPC-Bug. We could reprogram * The SIU and PCI bridge, and try to use larger MMU pages, but the - * performance gain is not measureable and it certainly complicates the + * performance gain is not measurable and it certainly complicates the * generic MMU model. * * In a effort to minimize memory usage for embedded applications, any diff --git a/arch/ppc/platforms/mvme5100.h b/arch/ppc/platforms/mvme5100.h index 9e2a09e636ae..fbb5495165c7 100644 --- a/arch/ppc/platforms/mvme5100.h +++ b/arch/ppc/platforms/mvme5100.h @@ -69,7 +69,7 @@ #define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF -/* All UART IRQ's are wire-OR'd to one MPIC IRQ */ +/* All UART IRQs are wire-OR'd to one MPIC IRQ */ #define STD_SERIAL_PORT_DFNS \ { 0, BASE_BAUD, MVME5100_SERIAL_1, \ MVME5100_SERIAL_IRQ, \ diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h index a07cbbdd72c6..a4bbaa8d858f 100644 --- a/arch/ppc/platforms/pplus.h +++ b/arch/ppc/platforms/pplus.h @@ -18,7 +18,7 @@ #include /* - * Due to limiations imposed by legacy hardware (primaryily IDE controllers), + * Due to limitations imposed by legacy hardware (primarily IDE controllers), * the PPLUS boards operate using a PReP address map. * * From Processor (physical) -> PCI: diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c index c627ba41335f..1df3150f016e 100644 --- a/arch/ppc/platforms/prep_pci.c +++ b/arch/ppc/platforms/prep_pci.c @@ -589,9 +589,9 @@ static unsigned char prep_pci_intpins[4][4] = { 4, 1, 2, 3}, /* Buses 3, 7, 11 ... */ }; -/* We have to turn on LEVEL mode for changed IRQ's */ -/* All PCI IRQ's need to be level mode, so this should be something - * other than hard-coded as well... IRQ's are individually mappable +/* We have to turn on LEVEL mode for changed IRQs */ +/* All PCI IRQs need to be level mode, so this should be something + * other than hard-coded as well... IRQs are individually mappable * to either edge or level. */ @@ -923,8 +923,8 @@ prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)"; Motherboard_map = ibm6015_pci_IRQ_map; Motherboard_routes = ibm6015_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ } void __init @@ -933,8 +933,8 @@ prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map_name = "IBM Thinkpad 850/860"; Motherboard_map = Nobis_pci_IRQ_map; Motherboard_routes = Nobis_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ } void __init @@ -943,8 +943,8 @@ prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)"; Motherboard_map = ibm8xx_pci_IRQ_map; Motherboard_routes = ibm8xx_pci_IRQ_routes; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA4; /* irq's 10, 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA4; /* IRQs 10, 13, 15 level-triggered */ } void __init @@ -954,8 +954,8 @@ prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi) Motherboard_map = ibm43p_pci_IRQ_map; Motherboard_routes = ibm43p_pci_IRQ_routes; Motherboard_non0 = ibm43p_pci_map_non0; - *irq_edge_mask_lo = 0x00; /* irq's 0-7 all edge-triggered */ - *irq_edge_mask_hi = 0xA0; /* irq's 13, 15 level-triggered */ + *irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */ + *irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */ } void __init diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index f166299571d6..6f21110a9747 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -593,7 +593,7 @@ static void __init prep_init_sound(void) PPC_DEVICE *audiodevice = NULL; /* - * Get the needed resource informations from residual data. + * Get the needed resource information from residual data. * */ if (have_residual_data) @@ -632,9 +632,9 @@ static void __init prep_init_sound(void) } /* - * Find a way to push these informations to the cs4232 driver + * Find a way to push this information to the cs4232 driver * Give it out with printk, when not in cmd_line? - * Append it to cmd_line and boot_command_line? + * Append it to cmd_line and boot_command_line? * Format is cs4232=io,irq,dma,dma2 */ } diff --git a/arch/ppc/platforms/prpmc750.h b/arch/ppc/platforms/prpmc750.h index 4c7adcc9ae33..c4dcff09d7ca 100644 --- a/arch/ppc/platforms/prpmc750.h +++ b/arch/ppc/platforms/prpmc750.h @@ -16,7 +16,7 @@ #define __ASM_PRPMC750_H__ /* - * Due to limiations imposed by legacy hardware (primaryily IDE controllers), + * Due to limitations imposed by legacy hardware (primarily IDE controllers), * the PrPMC750 carrier board operates using a PReP address map. * * From Processor (physical) -> PCI: diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 13d70ab50bf1..b55860734a72 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -1371,7 +1371,7 @@ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index a76002af686f..3352fae1c722 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -54,7 +54,7 @@ * * * Motorola has finally released a version of DINK32 that correctly - * (seemingly) initalizes the memory controller correctly, regardless + * (seemingly) initializes the memory controller correctly, regardless * of the amount of memory in the system. Once a method of determining * what version of DINK initializes the system for us, if applicable, is * found, we can hopefully stop hardcoding 32MB of RAM. @@ -473,7 +473,7 @@ sandpoint_request_io(void) arch_initcall(sandpoint_request_io); /* - * Interrupt setup and service. Interrrupts on the Sandpoint come + * Interrupt setup and service. Interrupts on the Sandpoint come * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO). * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4, * IDE is on EPIC 7 and 8. @@ -505,7 +505,7 @@ sandpoint_find_end_of_memory(void) if (bp->bi_memsize) return bp->bi_memsize; - /* DINK32 13.0 correctly initalizes things, so iff you use + /* DINK32 13.0 correctly initializes things, so iff you use * this you _should_ be able to change this instead of a * hardcoded value. */ #if 0 @@ -677,7 +677,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, * are non-zero, then we should use the board info from the bd_t * structure and the cmdline pointed to by r6 instead of the * information from birecs, if any. Otherwise, use the information - * from birecs as discovered by the preceeding call to + * from birecs as discovered by the preceding call to * parse_bootinfo(). This rule should work with both PPCBoot, which * uses a bd_t board info structure, and the kernel boot wrapper, * which uses birecs. diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c index c1583f488325..45b797b3a336 100644 --- a/arch/ppc/syslib/harrier.c +++ b/arch/ppc/syslib/harrier.c @@ -210,7 +210,7 @@ harrier_init(struct pci_controller *hose, * This assumes that PPCBug has initialized the memory controller (SMC) * on the Harrier correctly (i.e., it does no sanity checking). * It also assumes that the memory base registers are set to configure the - * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc. + * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc. * however, RAM base registers can be skipped (e.g. A, B, C are set, * D is skipped but E is set is okay). */ diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c index c5bf16b0d6a1..86821d8753ed 100644 --- a/arch/ppc/syslib/hawk_common.c +++ b/arch/ppc/syslib/hawk_common.c @@ -165,7 +165,7 @@ hawk_init(struct pci_controller *hose, processor_pci_mem_start + hose->mem_space.start) | 0x0); - /* Map MPIC into vitual memory */ + /* Map MPIC into virtual memory */ OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE); return 0; @@ -176,7 +176,7 @@ hawk_init(struct pci_controller *hose, * This assumes that PPCBug has initialized the memory controller (SMC) * on the Falcon/HAWK correctly (i.e., it does no sanity checking). * It also assumes that the memory base registers are set to configure the - * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc. + * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc. * however, RAM base registers can be skipped (e.g. A, B, C are set, * D is skipped but E is set is okay). */ diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c index e3b586b1ede9..fe860d52e2e4 100644 --- a/arch/ppc/syslib/m82xx_pci.c +++ b/arch/ppc/syslib/m82xx_pci.c @@ -197,7 +197,7 @@ pq2ads_setup_pci(struct pci_controller *hose) CPM high 0b0000 CPM middle 0b0001 CPM low 0b0010 - PCI reguest 0b0011 + PCI request 0b0011 Reserved 0b0100 Reserved 0b0101 Internal Core 0b0110 diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c index 2fc7c4150a18..437a294527a9 100644 --- a/arch/ppc/syslib/mpc10x_common.c +++ b/arch/ppc/syslib/mpc10x_common.c @@ -432,7 +432,7 @@ mpc10x_bridge_init(struct pci_controller *hose, phys_eumb_base); } - /* IRQ's are determined at runtime */ + /* IRQs are determined at runtime */ ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ; ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ; ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ; @@ -646,7 +646,7 @@ void __init mpc10x_set_openpic(void) openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020); /* Skip reserved space and map Message Unit Interrupt (I2O) */ openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0); - /* Skip reserved space and map Serial Interupts */ + /* Skip reserved space and map Serial Interrupts */ openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120); openpic_init(NUM_8259_INTERRUPTS); diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index 80c609019bda..ecfa2c0f8ba3 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -252,7 +252,7 @@ mpc52xx_setup_cpu(void) out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d); /* Disable XLB pipelining */ - /* (cfr errate 292. We could do this only just before ATA PIO + /* (cfr errata 292. We could do this only just before ATA PIO transaction and re-enable it after ...) */ out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index 31fb56593d17..c05ac87ece4c 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -21,7 +21,7 @@ #include #include -/* We use offsets for IORESOURCE_MEM to do not set dependences at compile time. +/* We use offsets for IORESOURCE_MEM to do not set dependencies at compile time. * They will get fixed up by mach_mpc8xx_fixup */ diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c index a6f8b686ea83..8485a68cd475 100644 --- a/arch/ppc/syslib/mv64x60.c +++ b/arch/ppc/syslib/mv64x60.c @@ -490,7 +490,7 @@ static struct platform_device *mv64x60_pd_devs[] __initdata = { /* * mv64x60_init() * - * Initialze the bridge based on setting passed in via 'si'. The bridge + * Initialize the bridge based on setting passed in via 'si'. The bridge * handle, 'bh', will be set so that it can be used to make subsequent * calls to routines in this file. */ @@ -1704,7 +1704,7 @@ gt64260_disable_all_windows(struct mv64x60_handle *bh, /* * gt64260a_chip_specific_init() * - * Implement errata work arounds for the GT64260A. + * Implement errata workarounds for the GT64260A. */ static void __init gt64260a_chip_specific_init(struct mv64x60_handle *bh, @@ -1776,7 +1776,7 @@ gt64260a_chip_specific_init(struct mv64x60_handle *bh, /* * gt64260b_chip_specific_init() * - * Implement errata work arounds for the GT64260B. + * Implement errata workarounds for the GT64260B. */ static void __init gt64260b_chip_specific_init(struct mv64x60_handle *bh, @@ -2316,7 +2316,7 @@ mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base) /* * mv64360_chip_specific_init() * - * Implement errata work arounds for the MV64360. + * Implement errata workarounds for the MV64360. */ static void __init mv64360_chip_specific_init(struct mv64x60_handle *bh, @@ -2336,7 +2336,7 @@ mv64360_chip_specific_init(struct mv64x60_handle *bh, /* * mv64460_chip_specific_init() * - * Implement errata work arounds for the MV64460. + * Implement errata workarounds for the MV64460. */ static void __init mv64460_chip_specific_init(struct mv64x60_handle *bh, diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index 50c55622ece9..491fe9a57229 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -27,7 +27,7 @@ * device model. The devices on the OCP bus are seeded by an * an initial OCP device array created by the arch-specific * Device entries can be added/removed/modified through OCP - * helper functions to accomodate system and board-specific + * helper functions to accommodate system and board-specific * parameters commonly found in embedded systems. OCP also * provides a standard method for devices to describe extended * attributes about themselves to the system. A standard access diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c index 607ebd111d44..c3b7b8bfbcfe 100644 --- a/arch/ppc/syslib/ppc403_pic.c +++ b/arch/ppc/syslib/ppc403_pic.c @@ -112,7 +112,7 @@ ppc4xx_pic_init(void) /* * Disable all external interrupts until they are - * explicity requested. + * explicitly requested. */ ppc_cached_irq_mask[0] = 0; diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c index d6d838b16dac..9e9035693bfa 100644 --- a/arch/ppc/syslib/ppc405_pci.c +++ b/arch/ppc/syslib/ppc405_pci.c @@ -137,7 +137,7 @@ ppc4xx_find_bridges(void) hose_a->pci_mem_offset = 0; /* Setup bridge memory/IO ranges & resources - * TODO: Handle firmwares setting up a legacy ISA mem base + * TODO: Handle firmware setting up a legacy ISA mem base */ hose_a->io_space.start = PPC405_PCI_LOWER_IO; hose_a->io_space.end = PPC405_PCI_UPPER_IO; diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c index 1eef4ffed4fb..bd301868996b 100644 --- a/arch/ppc/syslib/ppc4xx_dma.c +++ b/arch/ppc/syslib/ppc4xx_dma.c @@ -241,7 +241,7 @@ ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count) } /* - * Returns the number of bytes left to be transfered. + * Returns the number of bytes left to be transferred. * After a DMA transfer, this should return zero. * Reading this while a DMA transfer is still in progress will return * unpredictable results. diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c index 2b097800cdd9..af2425e4655f 100644 --- a/arch/ppc/syslib/ppc85xx_rio.c +++ b/arch/ppc/syslib/ppc85xx_rio.c @@ -349,7 +349,7 @@ EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); * @dev_instance: Pointer to interrupt-specific data * * Handles outbound message interrupts. Executes a register outbound - * mailbox event handler and acks the interrupt occurence. + * mailbox event handler and acks the interrupt occurrence. */ static irqreturn_t mpc85xx_rio_tx_handler(int irq, void *dev_instance) @@ -516,7 +516,7 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) * @dev_instance: Pointer to interrupt-specific data * * Handles inbound message interrupts. Executes a registered inbound - * mailbox event handler and acks the interrupt occurence. + * mailbox event handler and acks the interrupt occurrence. */ static irqreturn_t mpc85xx_rio_rx_handler(int irq, void *dev_instance) diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c index 6fd4cdbada72..3b82333e96d8 100644 --- a/arch/ppc/syslib/xilinx_pic.c +++ b/arch/ppc/syslib/xilinx_pic.c @@ -130,7 +130,7 @@ ppc4xx_pic_init(void) /* * Disable all external interrupts until they are - * explicity requested. + * explicitly requested. */ intc_out_be32(intc + IER, 0); -- cgit v1.2.3-59-g8ed1b