From 8282cd64d0f9a5292e9f8408a96733523e7f1fec Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Tue, 12 Jun 2018 15:11:40 +0200 Subject: s390/boot: make head.S and als.c be part of the decompressor only Since uncompressed kernel image does not have to be bootable anymore, move head.S, head_kdump.S and als.c to boot/ folder and compile them in just in the decompressor. Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/head.S | 339 ------------------------------------------------ 1 file changed, 339 deletions(-) delete mode 100644 arch/s390/kernel/head.S (limited to 'arch/s390/kernel/head.S') diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S deleted file mode 100644 index 5c42f16a54c4..000000000000 --- a/arch/s390/kernel/head.S +++ /dev/null @@ -1,339 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright IBM Corp. 1999, 2010 - * - * Author(s): Hartmut Penner - * Martin Schwidefsky - * Rob van der Heij - * Heiko Carstens - * - * There are 5 different IPL methods - * 1) load the image directly into ram at address 0 and do an PSW restart - * 2) linload will load the image from address 0x10000 to memory 0x10000 - * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated) - * 3) generate the tape ipl header, store the generated image on a tape - * and ipl from it - * In case of SL tape you need to IPL 5 times to get past VOL1 etc - * 4) generate the vm reader ipl header, move the generated image to the - * VM reader (use option NOH!) and do a ipl from reader (VM only) - * 5) direct call of start by the SALIPL loader - * We use the cpuid to distinguish between VM and native ipl - * params for kernel are pushed to 0x10400 (see setup.h) - * - */ - -#include -#include -#include -#include -#include -#include - -#define ARCH_OFFSET 4 - -__HEAD - -#define IPL_BS 0x730 - .org 0 - .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded - .long 0x02000018,0x60000050 # by ipl to addresses 0-23. - .long 0x02000068,0x60000050 # (a PSW and two CCWs). - .fill 80-24,1,0x40 # bytes 24-79 are discarded !! - .long 0x020000f0,0x60000050 # The next 160 byte are loaded - .long 0x02000140,0x60000050 # to addresses 0x18-0xb7 - .long 0x02000190,0x60000050 # They form the continuation - .long 0x020001e0,0x60000050 # of the CCW program started - .long 0x02000230,0x60000050 # by ipl and load the range - .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image - .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730 - .long 0x02000320,0x60000050 # in memory. At the end of - .long 0x02000370,0x60000050 # the channel program the PSW - .long 0x020003c0,0x60000050 # at location 0 is loaded. - .long 0x02000410,0x60000050 # Initial processing starts - .long 0x02000460,0x60000050 # at 0x200 = iplstart. - .long 0x020004b0,0x60000050 - .long 0x02000500,0x60000050 - .long 0x02000550,0x60000050 - .long 0x020005a0,0x60000050 - .long 0x020005f0,0x60000050 - .long 0x02000640,0x60000050 - .long 0x02000690,0x60000050 - .long 0x020006e0,0x20000050 - - .org 0x200 - -# -# subroutine to wait for end I/O -# -.Lirqwait: - mvc __LC_IO_NEW_PSW(16),.Lnewpsw # set up IO interrupt psw - lpsw .Lwaitpsw -.Lioint: - br %r14 - .align 8 -.Lnewpsw: - .quad 0x0000000080000000,.Lioint -.Lwaitpsw: - .long 0x020a0000,0x80000000+.Lioint - -# -# subroutine for loading cards from the reader -# -.Lloader: - la %r4,0(%r14) - la %r3,.Lorb # r2 = address of orb into r2 - la %r5,.Lirb # r4 = address of irb - la %r6,.Lccws - la %r7,20 -.Linit: - st %r2,4(%r6) # initialize CCW data addresses - la %r2,0x50(%r2) - la %r6,8(%r6) - bct 7,.Linit - - lctl %c6,%c6,.Lcr6 # set IO subclass mask - slr %r2,%r2 -.Lldlp: - ssch 0(%r3) # load chunk of 1600 bytes - bnz .Llderr -.Lwait4irq: - bas %r14,.Lirqwait - c %r1,__LC_SUBCHANNEL_ID # compare subchannel number - bne .Lwait4irq - tsch 0(%r5) - - slr %r0,%r0 - ic %r0,8(%r5) # get device status - chi %r0,8 # channel end ? - be .Lcont - chi %r0,12 # channel end + device end ? - be .Lcont - - l %r0,4(%r5) - s %r0,8(%r3) # r0/8 = number of ccws executed - mhi %r0,10 # *10 = number of bytes in ccws - lh %r3,10(%r5) # get residual count - sr %r0,%r3 # #ccws*80-residual=#bytes read - ar %r2,%r0 - - br %r4 # r2 contains the total size - -.Lcont: - ahi %r2,0x640 # add 0x640 to total size - la %r6,.Lccws - la %r7,20 -.Lincr: - l %r0,4(%r6) # update CCW data addresses - ahi %r0,0x640 - st %r0,4(%r6) - ahi %r6,8 - bct 7,.Lincr - - b .Lldlp -.Llderr: - lpsw .Lcrash - - .align 8 -.Lorb: .long 0x00000000,0x0080ff00,.Lccws -.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -.Lcr6: .long 0xff000000 -.Lloadp:.long 0,0 - .align 8 -.Lcrash:.long 0x000a0000,0x00000000 - - .align 8 -.Lccws: .rept 19 - .long 0x02600050,0x00000000 - .endr - .long 0x02200050,0x00000000 - -iplstart: - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - lhi %r1,2 # mode 2 = esame (dump) - sigp %r1,%r0,0x12 # switch to esame mode - bras %r13,0f - .fill 16,4,0x0 -0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs - sam31 # switch to 31 bit addressing mode - lh %r1,__LC_SUBCHANNEL_ID # test if subchannel number - bct %r1,.Lnoload # is valid - l %r1,__LC_SUBCHANNEL_ID # load ipl subchannel number - la %r2,IPL_BS # load start address - bas %r14,.Lloader # load rest of ipl image - l %r12,.Lparm # pointer to parameter area - st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number - -# -# load parameter file from ipl device -# -.Lagain1: - l %r2,.Linitrd # ramdisk loc. is temp - bas %r14,.Lloader # load parameter file - ltr %r2,%r2 # got anything ? - bz .Lnopf - chi %r2,895 - bnh .Lnotrunc - la %r2,895 -.Lnotrunc: - l %r4,.Linitrd - clc 0(3,%r4),.L_hdr # if it is HDRx - bz .Lagain1 # skip dataset header - clc 0(3,%r4),.L_eof # if it is EOFx - bz .Lagain1 # skip dateset trailer - la %r5,0(%r4,%r2) - lr %r3,%r2 - la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line - mvc 0(256,%r3),0(%r4) - mvc 256(256,%r3),256(%r4) - mvc 512(256,%r3),512(%r4) - mvc 768(122,%r3),768(%r4) - slr %r0,%r0 - b .Lcntlp -.Ldelspc: - ic %r0,0(%r2,%r3) - chi %r0,0x20 # is it a space ? - be .Lcntlp - ahi %r2,1 - b .Leolp -.Lcntlp: - brct %r2,.Ldelspc -.Leolp: - slr %r0,%r0 - stc %r0,0(%r2,%r3) # terminate buffer -.Lnopf: - -# -# load ramdisk from ipl device -# -.Lagain2: - l %r2,.Linitrd # addr of ramdisk - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) - bas %r14,.Lloader # load ramdisk - st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd - ltr %r2,%r2 - bnz .Lrdcont - st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found -.Lrdcont: - l %r2,.Linitrd - - clc 0(3,%r2),.L_hdr # skip HDRx and EOFx - bz .Lagain2 - clc 0(3,%r2),.L_eof - bz .Lagain2 - -# -# reset files in VM reader -# - stidp .Lcpuid # store cpuid - tm .Lcpuid,0xff # running VM ? - bno .Lnoreset - la %r2,.Lreset - lhi %r3,26 - diag %r2,%r3,8 - la %r5,.Lirb - stsch 0(%r5) # check if irq is pending - tm 30(%r5),0x0f # by verifying if any of the - bnz .Lwaitforirq # activity or status control - tm 31(%r5),0xff # bits is set in the schib - bz .Lnoreset -.Lwaitforirq: - bas %r14,.Lirqwait # wait for IO interrupt - c %r1,__LC_SUBCHANNEL_ID # compare subchannel number - bne .Lwaitforirq - la %r5,.Lirb - tsch 0(%r5) -.Lnoreset: - b .Lnoload - -# -# everything loaded, go for it -# -.Lnoload: - l %r1,.Lstartup - br %r1 - -.Linitrd:.long _end # default address of initrd -.Lparm: .long PARMAREA -.Lstartup: .long startup -.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 - .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 - .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" -.L_eof: .long 0xc5d6c600 /* C'EOF' */ -.L_hdr: .long 0xc8c4d900 /* C'HDR' */ - .align 8 -.Lcpuid:.fill 8,1,0 - -# -# startup-code at 0x10000, running in absolute addressing mode -# this is called either by the ipl loader or directly by PSW restart -# or linload or SALIPL -# - .org 0x10000 -ENTRY(startup) - j .Lep_startup_normal - .org 0x10008 -# -# This is a list of s390 kernel entry points. At address 0x1000f the number of -# valid entry points is stored. -# -# IMPORTANT: Do not change this table, it is s390 kernel ABI! -# - .ascii "S390EP" - .byte 0x00,0x01 -# -# kdump startup-code at 0x10010, running in 64 bit absolute addressing mode -# - .org 0x10010 -ENTRY(startup_kdump) - j .Lep_startup_kdump -.Lep_startup_normal: - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - lhi %r1,2 # mode 2 = esame (dump) - sigp %r1,%r0,0x12 # switch to esame mode - bras %r13,0f - .fill 16,4,0x0 -0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs - sam64 # switch to 64 bit addressing mode - basr %r13,0 # get base -.LPG0: - xc 0x200(256),0x200 # partially clear lowcore - xc 0x300(256),0x300 - xc 0xe00(256),0xe00 - xc 0xf00(256),0xf00 - lctlg %c0,%c15,0x200(%r0) # initialize control registers - stcke __LC_BOOT_CLOCK - mvc __LC_LAST_UPDATE_CLOCK(8),__LC_BOOT_CLOCK+1 - spt 6f-.LPG0(%r13) - mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) - l %r15,.Lstack-.LPG0(%r13) - ahi %r15,-STACK_FRAME_OVERHEAD - brasl %r14,verify_facilities -# For uncompressed images, continue in -# arch/s390/kernel/head64.S. For compressed images, continue in -# arch/s390/boot/compressed/head.S. - jg startup_continue - -.Lstack: - .long 0x8000 + (1<<(PAGE_SHIFT+THREAD_SIZE_ORDER)) - .align 8 -6: .long 0x7fffffff,0xffffffff - -#include "head_kdump.S" - -# -# params at 10400 (setup.h) -# - .org PARMAREA - .long 0,0 # IPL_DEVICE - .long 0,0 # INITRD_START - .long 0,0 # INITRD_SIZE - .long 0,0 # OLDMEM_BASE - .long 0,0 # OLDMEM_SIZE - - .org COMMAND_LINE - .byte "root=/dev/ram0 ro" - .byte 0 - - .org 0x11000 -- cgit v1.2.3-59-g8ed1b