From afa2c9407f8908e2269b243773cbb0997c553804 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 8 Aug 2013 12:38:34 +0200 Subject: sh: ecovec24: Use MMC/SDHI CD and RO GPIO Pass the CD and RO GPIO numbers to the MMC SPI and SDHI drivers and remove the custom .get_cd() and .get_ro() callback functions. Signed-off-by: Laurent Pinchart Acked-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- arch/sh/boards/mach-ecovec24/setup.c | 42 +++++++----------------------------- 1 file changed, 8 insertions(+), 34 deletions(-) (limited to 'arch/sh/boards') diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 61fade0ffa96..a1557ec4833f 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -617,18 +617,14 @@ static void sdhi0_set_pwr(struct platform_device *pdev, int state) gpio_set_value(GPIO_PTB6, state); } -static int sdhi0_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(GPIO_PTY7); -} - static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .set_pwr = sdhi0_set_pwr, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, - .get_cd = sdhi0_get_cd, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PTY7, }; static struct resource sdhi0_resources[] = { @@ -675,18 +671,14 @@ static void cn12_set_pwr(struct platform_device *pdev, int state) #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SDHI1 */ -static int sdhi1_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(GPIO_PTW7); -} - static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PTW7, .set_pwr = cn12_set_pwr, - .get_cd = sdhi1_get_cd, }; static struct resource sdhi1_resources[] = { @@ -716,27 +708,19 @@ static struct platform_device sdhi1_device = { #else /* MMC SPI */ -static int mmc_spi_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PTY6); -} - -static int mmc_spi_get_cd(struct device *dev) -{ - return !gpio_get_value(GPIO_PTY7); -} - static void mmc_spi_setpower(struct device *dev, unsigned int maskval) { gpio_set_value(GPIO_PTB6, maskval ? 1 : 0); } static struct mmc_spi_platform_data mmc_spi_info = { - .get_ro = mmc_spi_get_ro, - .get_cd = mmc_spi_get_cd, .caps = MMC_CAP_NEEDS_POLL, + .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */ .setpower = mmc_spi_setpower, + .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO, + .cd_gpio = GPIO_PTY7, + .ro_gpio = GPIO_PTY6, }; static struct spi_board_info spi_bus[] = { @@ -1339,10 +1323,6 @@ static int __init arch_setup(void) gpio_direction_input(GPIO_PTR6); /* SD-card slot CN11 */ - /* Card-detect, used on CN11, either with SDHI0 or with SPI */ - gpio_request(GPIO_PTY7, NULL); - gpio_direction_input(GPIO_PTY7); - #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */ gpio_request(GPIO_FN_SDHI0WP, NULL); @@ -1361,8 +1341,6 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTM4, 1); /* active low CS */ gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */ gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */ - gpio_request(GPIO_PTY6, NULL); /* write protect */ - gpio_direction_input(GPIO_PTY6); spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); #endif @@ -1392,10 +1370,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL); - /* Card-detect, used on CN12 with SDHI1 */ - gpio_request(GPIO_PTW7, NULL); - gpio_direction_input(GPIO_PTW7); - cn12_enabled = true; #endif -- cgit v1.2.3-59-g8ed1b