From e7f93a355c7e32c26eab8910cf53b7506bb046c5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 27 Sep 2006 17:19:13 +0900 Subject: sh: Make PAGE_OFFSET configurable. nommu needs to be able to shift PAGE_OFFSET, so we switch it to a non-user-visible CONFIG_PAGE_OFFSET and use that in the few places where it matters. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 26 -------------------------- arch/sh/boot/compressed/Makefile | 3 ++- arch/sh/kernel/vmlinux.lds.S | 2 +- arch/sh/mm/Kconfig | 31 +++++++++++++++++++++++++++++++ 4 files changed, 34 insertions(+), 28 deletions(-) (limited to 'arch/sh') diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 07d6d699e9c2..035df7fb2237 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -238,32 +238,6 @@ endchoice source "arch/sh/mm/Kconfig" -config MEMORY_START - hex "Physical memory start address" - default "0x08000000" - ---help--- - Computers built with Hitachi SuperH processors always - map the ROM starting at address zero. But the processor - does not specify the range that RAM takes. - - The physical memory (RAM) start address will be automatically - set to 08000000. Other platforms, such as the Solution Engine - boards typically map RAM at 0C000000. - - Tweak this only when porting to a new machine which does not - already have a defconfig. Changing it from the known correct - value on any of the known systems will only lead to disaster. - -config MEMORY_SIZE - hex "Physical memory size" - default "0x00400000" - help - This sets the default memory size assumed by your SH kernel. It can - be overridden as normal by the 'mem=' argument on the kernel command - line. If unsure, consult your board specifications or just leave it - as 0x00400000 which was the default value before this became - configurable. - config CF_ENABLER bool "Compact Flash Enabler support" depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03 diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index 75a6876bf6c6..7074267c01b7 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -18,9 +18,10 @@ endif # Assign dummy values if these 2 variables are not defined, # in order to suppress error message. # +CONFIG_PAGE_OFFSET ?= 0x80000000 CONFIG_MEMORY_START ?= 0x0c000000 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 -IMAGE_OFFSET := $(shell printf "0x%8x" $$[0x80000000+$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)]) +IMAGE_OFFSET := $(shell printf "0x%8x" $$[$(CONFIG_PAGE_OFFSET)+$(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)]) LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 3f3e1e0735f5..eb860c51c697 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -13,7 +13,7 @@ OUTPUT_ARCH(sh) ENTRY(_start) SECTIONS { - . = 0x80000000 + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; + . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; _text = .; /* Text and read-only data */ text = .; /* Text and read-only data */ .empty_zero_page : { diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 9064dfc91e6d..f25903aa607b 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -161,6 +161,37 @@ config MMU turning this off will boot the kernel on these machines with the MMU implicitly switched off. +config PAGE_OFFSET + hex + default "0x80000000" if MMU + default "0x00000000" + +config MEMORY_START + hex "Physical memory start address" + default "0x08000000" + ---help--- + Computers built with Hitachi SuperH processors always + map the ROM starting at address zero. But the processor + does not specify the range that RAM takes. + + The physical memory (RAM) start address will be automatically + set to 08000000. Other platforms, such as the Solution Engine + boards typically map RAM at 0C000000. + + Tweak this only when porting to a new machine which does not + already have a defconfig. Changing it from the known correct + value on any of the known systems will only lead to disaster. + +config MEMORY_SIZE + hex "Physical memory size" + default "0x00400000" + help + This sets the default memory size assumed by your SH kernel. It can + be overridden as normal by the 'mem=' argument on the kernel command + line. If unsure, consult your board specifications or just leave it + as 0x00400000 which was the default value before this became + configurable. + config 32BIT bool "Support 32-bit physical addressing through PMB" depends on CPU_SH4A -- cgit v1.2.3-59-g8ed1b