From b65233a9c1da587bf19ee161982f4f0ec59941c0 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 11 Jul 2008 17:14:21 +0200 Subject: x86, AMD IOMMU: add comments to the initialization code This patch adds some comments to the AMD IOMMU initialization code to increase its readability. Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu_init.c | 214 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 206 insertions(+), 8 deletions(-) (limited to 'arch/x86/kernel/amd_iommu_init.c') diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index bb0280077a32..9ddb46d7c524 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -71,6 +71,17 @@ #define ACPI_DEVFLAG_LINT1 0x80 #define ACPI_DEVFLAG_ATSDIS 0x10000000 +/* + * ACPI table definitions + * + * These data structures are laid over the table to parse the important values + * out of it. + */ + +/* + * structure describing one IOMMU in the ACPI table. Typically followed by one + * or more ivhd_entrys. + */ struct ivhd_header { u8 type; u8 flags; @@ -83,6 +94,10 @@ struct ivhd_header { u32 reserved; } __attribute__((packed)); +/* + * A device entry describing which devices a specific IOMMU translates and + * which requestor ids they use. + */ struct ivhd_entry { u8 type; u16 devid; @@ -90,6 +105,10 @@ struct ivhd_entry { u32 ext; } __attribute__((packed)); +/* + * An AMD IOMMU memory definition structure. It defines things like exclusion + * ranges for devices and regions that should be unity mapped. + */ struct ivmd_header { u8 type; u8 flags; @@ -103,22 +122,66 @@ struct ivmd_header { static int __initdata amd_iommu_detected; -u16 amd_iommu_last_bdf; -struct list_head amd_iommu_unity_map; -unsigned amd_iommu_aperture_order = 26; -int amd_iommu_isolate; +u16 amd_iommu_last_bdf; /* largest PCI device id we have + to handle */ +struct list_head amd_iommu_unity_map; /* a list of required unity mappings + we find in ACPI */ +unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */ +int amd_iommu_isolate; /* if 1, device isolation is enabled */ -struct list_head amd_iommu_list; +struct list_head amd_iommu_list; /* list of all AMD IOMMUs in the + system */ + +/* + * Pointer to the device table which is shared by all AMD IOMMUs + * it is indexed by the PCI device id or the HT unit id and contains + * information about the domain the device belongs to as well as the + * page table root pointer. + */ struct dev_table_entry *amd_iommu_dev_table; + +/* + * The alias table is a driver specific data structure which contains the + * mappings of the PCI device ids to the actual requestor ids on the IOMMU. + * More than one device can share the same requestor id. + */ u16 *amd_iommu_alias_table; + +/* + * The rlookup table is used to find the IOMMU which is responsible + * for a specific device. It is also indexed by the PCI device id. + */ struct amd_iommu **amd_iommu_rlookup_table; + +/* + * The pd table (protection domain table) is used to find the protection domain + * data structure a device belongs to. Indexed with the PCI device id too. + */ struct protection_domain **amd_iommu_pd_table; + +/* + * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap + * to know which ones are already in use. + */ unsigned long *amd_iommu_pd_alloc_bitmap; -static u32 dev_table_size; -static u32 alias_table_size; -static u32 rlookup_table_size; +static u32 dev_table_size; /* size of the device table */ +static u32 alias_table_size; /* size of the alias table */ +static u32 rlookup_table_size; /* size if the rlookup table */ + +/**************************************************************************** + * + * AMD IOMMU MMIO register space handling functions + * + * These functions are used to program the IOMMU device registers in + * MMIO space required for that driver. + * + ****************************************************************************/ +/* + * This function set the exclusion range in the IOMMU. DMA accesses to the + * exclusion range are passed through untranslated + */ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu) { u64 start = iommu->exclusion_start & PAGE_MASK; @@ -137,6 +200,7 @@ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu) &entry, sizeof(entry)); } +/* Programs the physical address of the device table into the IOMMU hardware */ static void __init iommu_set_device_table(struct amd_iommu *iommu) { u32 entry; @@ -149,6 +213,7 @@ static void __init iommu_set_device_table(struct amd_iommu *iommu) &entry, sizeof(entry)); } +/* Generic functions to enable/disable certain features of the IOMMU. */ static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit) { u32 ctrl; @@ -167,6 +232,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit) writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET); } +/* Function to enable the hardware */ void __init iommu_enable(struct amd_iommu *iommu) { printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at "); @@ -176,6 +242,10 @@ void __init iommu_enable(struct amd_iommu *iommu) iommu_feature_enable(iommu, CONTROL_IOMMU_EN); } +/* + * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in + * the system has one. + */ static u8 * __init iommu_map_mmio_space(u64 address) { u8 *ret; @@ -199,6 +269,19 @@ static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu) release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH); } +/**************************************************************************** + * + * The functions below belong to the first pass of AMD IOMMU ACPI table + * parsing. In this pass we try to find out the highest device id this + * code has to handle. Upon this information the size of the shared data + * structures is determined later. + * + ****************************************************************************/ + +/* + * This function reads the last device id the IOMMU has to handle from the PCI + * capability header for this IOMMU + */ static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr) { u32 cap; @@ -209,6 +292,10 @@ static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr) return 0; } +/* + * After reading the highest device id from the IOMMU PCI capability header + * this function looks if there is a higher device id defined in the ACPI table + */ static int __init find_last_devid_from_ivhd(struct ivhd_header *h) { u8 *p = (void *)h, *end = (void *)h; @@ -229,6 +316,7 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h) case IVHD_DEV_RANGE_END: case IVHD_DEV_ALIAS: case IVHD_DEV_EXT_SELECT: + /* all the above subfield types refer to device ids */ UPDATE_LAST_BDF(dev->devid); break; default: @@ -242,6 +330,11 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h) return 0; } +/* + * Iterate over all IVHD entries in the ACPI table and find the highest device + * id which we need to handle. This is the first of three functions which parse + * the ACPI table. So we check the checksum here. + */ static int __init find_last_devid_acpi(struct acpi_table_header *table) { int i; @@ -277,6 +370,20 @@ static int __init find_last_devid_acpi(struct acpi_table_header *table) return 0; } +/**************************************************************************** + * + * The following functions belong the the code path which parses the ACPI table + * the second time. In this ACPI parsing iteration we allocate IOMMU specific + * data structures, initialize the device/alias/rlookup table and also + * basically initialize the hardware. + * + ****************************************************************************/ + +/* + * Allocates the command buffer. This buffer is per AMD IOMMU. We can + * write commands to that buffer later and the IOMMU will execute them + * asynchronously + */ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu) { u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL, @@ -307,6 +414,7 @@ static void __init free_command_buffer(struct amd_iommu *iommu) get_order(CMD_BUFFER_SIZE)); } +/* sets a specific bit in the device table entry. */ static void set_dev_entry_bit(u16 devid, u8 bit) { int i = (bit >> 5) & 0x07; @@ -315,6 +423,10 @@ static void set_dev_entry_bit(u16 devid, u8 bit) amd_iommu_dev_table[devid].data[i] |= (1 << _bit); } +/* + * This function takes the device specific flags read from the ACPI + * table and sets up the device table entry with that information + */ static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags) { if (flags & ACPI_DEVFLAG_INITPASS) @@ -333,11 +445,16 @@ static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags) set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS); } +/* Writes the specific IOMMU for a device into the rlookup table */ static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid) { amd_iommu_rlookup_table[devid] = iommu; } +/* + * Reads the device exclusion range from ACPI and initialize IOMMU with + * it + */ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) { struct amd_iommu *iommu = amd_iommu_rlookup_table[devid]; @@ -346,12 +463,22 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) return; if (iommu) { + /* + * We only can configure exclusion ranges per IOMMU, not + * per device. But we can enable the exclusion range per + * device. This is done here + */ set_dev_entry_bit(m->devid, DEV_ENTRY_EX); iommu->exclusion_start = m->range_start; iommu->exclusion_length = m->range_length; } } +/* + * This function reads some important data from the IOMMU PCI space and + * initializes the driver data structure with it. It reads the hardware + * capabilities and the first/last device entries + */ static void __init init_iommu_from_pci(struct amd_iommu *iommu) { int bus = PCI_BUS(iommu->devid); @@ -367,6 +494,10 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu) iommu->last_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_LD(range)); } +/* + * Takes a pointer to an AMD IOMMU entry in the ACPI table and + * initializes the hardware and our data structures with it. + */ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, struct ivhd_header *h) { @@ -467,6 +598,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, } } +/* Initializes the device->iommu mapping for the driver */ static int __init init_iommu_devices(struct amd_iommu *iommu) { u16 i; @@ -494,6 +626,11 @@ static void __init free_iommu_all(void) } } +/* + * This function clues the initialization function for one IOMMU + * together and also allocates the command buffer and programs the + * hardware. It does NOT enable the IOMMU. This is done afterwards. + */ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h) { spin_lock_init(&iommu->lock); @@ -521,6 +658,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h) return 0; } +/* + * Iterates over all IOMMU entries in the ACPI table, allocates the + * IOMMU structure and initializes it with init_iommu_one() + */ static int __init init_iommu_all(struct acpi_table_header *table) { u8 *p = (u8 *)table, *end = (u8 *)table; @@ -555,6 +696,14 @@ static int __init init_iommu_all(struct acpi_table_header *table) return 0; } +/**************************************************************************** + * + * The next functions belong to the third pass of parsing the ACPI + * table. In this last pass the memory mapping requirements are + * gathered (like exclusion and unity mapping reanges). + * + ****************************************************************************/ + static void __init free_unity_maps(void) { struct unity_map_entry *entry, *next; @@ -565,6 +714,7 @@ static void __init free_unity_maps(void) } } +/* called when we find an exclusion range definition in ACPI */ static int __init init_exclusion_range(struct ivmd_header *m) { int i; @@ -588,6 +738,7 @@ static int __init init_exclusion_range(struct ivmd_header *m) return 0; } +/* called for unity map ACPI definition */ static int __init init_unity_map_range(struct ivmd_header *m) { struct unity_map_entry *e = 0; @@ -619,6 +770,7 @@ static int __init init_unity_map_range(struct ivmd_header *m) return 0; } +/* iterates over all memory definitions we find in the ACPI table */ static int __init init_memory_definitions(struct acpi_table_header *table) { u8 *p = (u8 *)table, *end = (u8 *)table; @@ -642,6 +794,10 @@ static int __init init_memory_definitions(struct acpi_table_header *table) return 0; } +/* + * This function finally enables all IOMMUs found in the system after + * they have been initialized + */ static void __init enable_iommus(void) { struct amd_iommu *iommu; @@ -678,6 +834,34 @@ static struct sys_device device_amd_iommu = { .cls = &amd_iommu_sysdev_class, }; +/* + * This is the core init function for AMD IOMMU hardware in the system. + * This function is called from the generic x86 DMA layer initialization + * code. + * + * This function basically parses the ACPI table for AMD IOMMU (IVRS) + * three times: + * + * 1 pass) Find the highest PCI device id the driver has to handle. + * Upon this information the size of the data structures is + * determined that needs to be allocated. + * + * 2 pass) Initialize the data structures just allocated with the + * information in the ACPI table about available AMD IOMMUs + * in the system. It also maps the PCI devices in the + * system to specific IOMMUs + * + * 3 pass) After the basic data structures are allocated and + * initialized we update them with information about memory + * remapping requirements parsed out of the ACPI table in + * this last pass. + * + * After that the hardware is initialized and ready to go. In the last + * step we do some Linux specific things like registering the driver in + * the dma_ops interface and initializing the suspend/resume support + * functions. Finally it prints some information about AMD IOMMUs and + * the driver state and enables the hardware. + */ int __init amd_iommu_init(void) { int i, ret = 0; @@ -821,6 +1005,13 @@ free: goto out; } +/**************************************************************************** + * + * Early detect code. This code runs at IOMMU detection time in the DMA + * layer. It just looks if there is an IVRS ACPI table to detect AMD + * IOMMUs + * + ****************************************************************************/ static int __init early_amd_iommu_detect(struct acpi_table_header *table) { return 0; @@ -841,6 +1032,13 @@ void __init amd_iommu_detect(void) } } +/**************************************************************************** + * + * Parsing functions for the AMD IOMMU specific kernel command line + * options. + * + ****************************************************************************/ + static int __init parse_amd_iommu_options(char *str) { for (; *str; ++str) { -- cgit v1.2.3-59-g8ed1b