From 1da4b1c6a4dfb5a13d7147a27c1ac53fed09befd Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 9 Nov 2010 11:22:58 +0000 Subject: x86/mrst: Add SFI platform device parsing code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SFI provides a series of tables. These describe the platform devices present including SPI and I²C devices, as well as various sensors, keypads and other glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c) This patch is a merge of the core elements and relevant fixes from the Intel development code by Feng, Alek, myself into a single coherent patch for upstream submission. It provides the needed infrastructure to register I2C, SPI and platform devices described by the tables, as well as handlers for some of the hardware already supported in kernel. The 0.8 firmware also provides GPIO tables. Devices are created at boot time or if they are SCU dependant at the point an SCU is discovered. The existing Linux device mechanisms will then handle the device binding. At an abstract level this is an SFI to Linux device translator. Device/platform specific setup/glue is in this file. This is done so that the drivers for the generic I²C and SPI bus devices remain cross platform as they should. (Updated from RFC version to correct the emc1403 name used by the firmware and a wrongly used #define) Signed-off-by: Alek Du LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain> [Clean ups, removal of 0.7 support] Signed-off-by: Feng Tang [Clean ups] Signed-off-by: Alan Cox Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 2 + arch/x86/include/asm/mrst.h | 4 + arch/x86/platform/mrst/mrst.c | 515 +++++++++++++++++++++++++++++++++++++++++- 3 files changed, 517 insertions(+), 4 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e8327686d3c5..b306b84fc8c8 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -385,6 +385,8 @@ config X86_MRST depends on X86_EXTENDED_PLATFORM depends on X86_IO_APIC select APB_TIMER + select I2C + select SPI ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index 4a711a684b17..283debd29fc0 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -50,4 +50,8 @@ extern void mrst_early_console_init(void); extern struct console early_hsu_console; extern void hsu_early_console_init(void); + +extern void intel_scu_devices_create(void); +extern void intel_scu_devices_destroy(void); + #endif /* _ASM_X86_MRST_H */ diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 79ae68154e87..cfa1af24edd5 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -9,9 +9,19 @@ * as published by the Free Software Foundation; version 2 * of the License. */ + +#define pr_fmt(fmt) "mrst: " fmt + #include #include #include +#include +#include +#include +#include +#include +#include +#include #include #include @@ -23,8 +33,10 @@ #include #include #include +#include #include + /* * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, * cmdline option x86_mrst_timer can be used to override the configuration @@ -102,10 +114,10 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table) memcpy(sfi_mtimer_array, pentry, totallen); } - printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num); + pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); pentry = sfi_mtimer_array; for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { - printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz," + pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz," " irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->freq_hz, pentry->irq); if (!pentry->irq) @@ -176,10 +188,10 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) memcpy(sfi_mrtc_array, pentry, totallen); } - printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num); + pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); pentry = sfi_mrtc_array; for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { - printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n", + pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", totallen, (u32)pentry->phys_addr, pentry->irq); mp_irq.type = MP_IOAPIC; mp_irq.irqtype = mp_INT; @@ -309,3 +321,498 @@ static inline int __init setup_x86_mrst_timer(char *arg) return 0; } __setup("x86_mrst_timer=", setup_x86_mrst_timer); + +/* + * Parsing GPIO table first, since the DEVS table will need this table + * to map the pin name to the actual pin. + */ +static struct sfi_gpio_table_entry *gpio_table; +static int gpio_num_entry; + +static int __init sfi_parse_gpio(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_gpio_table_entry *pentry; + int num, i; + + if (gpio_table) + return 0; + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); + pentry = (struct sfi_gpio_table_entry *)sb->pentry; + + gpio_table = (struct sfi_gpio_table_entry *) + kmalloc(num * sizeof(*pentry), GFP_KERNEL); + if (!gpio_table) + return -1; + memcpy(gpio_table, pentry, num * sizeof(*pentry)); + gpio_num_entry = num; + + pr_debug("GPIO pin info:\n"); + for (i = 0; i < num; i++, pentry++) + pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," + " pin = %d\n", i, + pentry->controller_name, + pentry->pin_name, + pentry->pin_no); + return 0; +} + +static int get_gpio_by_name(const char *name) +{ + struct sfi_gpio_table_entry *pentry = gpio_table; + int i; + + if (!pentry) + return -1; + for (i = 0; i < gpio_num_entry; i++, pentry++) { + if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) + return pentry->pin_no; + } + return -1; +} + +/* + * Here defines the array of devices platform data that IAFW would export + * through SFI "DEVS" table, we use name and type to match the device and + * its platform data. + */ +struct devs_id { + char name[SFI_NAME_LEN + 1]; + u8 type; + u8 delay; + void *(*get_platform_data)(void *info); +}; + +/* the offset for the mapping of global gpio pin to irq */ +#define MRST_IRQ_OFFSET 0x100 + +static void __init *pmic_gpio_platform_data(void *info) +{ + static struct intel_pmic_gpio_platform_data pmic_gpio_pdata; + int gpio_base = get_gpio_by_name("pmic_gpio_base"); + + if (gpio_base == -1) + gpio_base = 64; + pmic_gpio_pdata.gpio_base = gpio_base; + pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET; + pmic_gpio_pdata.gpiointr = 0xffffeff8; + + return &pmic_gpio_pdata; +} + +static void __init *max3111_platform_data(void *info) +{ + struct spi_board_info *spi_info = info; + int intr = get_gpio_by_name("max3111_int"); + + if (intr == -1) + return NULL; + spi_info->irq = intr + MRST_IRQ_OFFSET; + return NULL; +} + +/* we have multiple max7315 on the board ... */ +#define MAX7315_NUM 2 +static void __init *max7315_platform_data(void *info) +{ + static struct pca953x_platform_data max7315_pdata[MAX7315_NUM]; + static int nr; + struct pca953x_platform_data *max7315 = &max7315_pdata[nr]; + struct i2c_board_info *i2c_info = info; + int gpio_base, intr; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + + if (nr == MAX7315_NUM) { + pr_err("too many max7315s, we only support %d\n", + MAX7315_NUM); + return NULL; + } + /* we have several max7315 on the board, we only need load several + * instances of the same pca953x driver to cover them + */ + strcpy(i2c_info->type, "max7315"); + if (nr++) { + sprintf(base_pin_name, "max7315_%d_base", nr); + sprintf(intr_pin_name, "max7315_%d_int", nr); + } else { + strcpy(base_pin_name, "max7315_base"); + strcpy(intr_pin_name, "max7315_int"); + } + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + if (gpio_base == -1) + return NULL; + max7315->gpio_base = gpio_base; + if (intr != -1) { + i2c_info->irq = intr + MRST_IRQ_OFFSET; + max7315->irq_base = gpio_base + MRST_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + max7315->irq_base = -1; + } + return max7315; +} + +static void __init *emc1403_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("thermal_int"); + int intr2nd = get_gpio_by_name("thermal_alert"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static void __init *lis331dl_platform_data(void *info) +{ + static short intr2nd_pdata; + struct i2c_board_info *i2c_info = info; + int intr = get_gpio_by_name("accel_int"); + int intr2nd = get_gpio_by_name("accel_2"); + + if (intr == -1 || intr2nd == -1) + return NULL; + + i2c_info->irq = intr + MRST_IRQ_OFFSET; + intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET; + + return &intr2nd_pdata; +} + +static const struct devs_id __initconst device_ids[] = { + {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, + {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, + {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, + {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, + {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, + {}, +}; + +#define MAX_IPCDEVS 24 +static struct platform_device *ipc_devs[MAX_IPCDEVS]; +static int ipc_next_dev; + +#define MAX_SCU_SPI 24 +static struct spi_board_info *spi_devs[MAX_SCU_SPI]; +static int spi_next_dev; + +#define MAX_SCU_I2C 24 +static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; +static int i2c_bus[MAX_SCU_I2C]; +static int i2c_next_dev; + +static void __init intel_scu_device_register(struct platform_device *pdev) +{ + if(ipc_next_dev == MAX_IPCDEVS) + pr_err("too many SCU IPC devices"); + else + ipc_devs[ipc_next_dev++] = pdev; +} + +static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) +{ + struct spi_board_info *new_dev; + + if (spi_next_dev == MAX_SCU_SPI) { + pr_err("too many SCU SPI devices"); + return; + } + + new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed spi dev %s\n", + sdev->modalias); + return; + } + memcpy(new_dev, sdev, sizeof(*sdev)); + + spi_devs[spi_next_dev++] = new_dev; +} + +static void __init intel_scu_i2c_device_register(int bus, + struct i2c_board_info *idev) +{ + struct i2c_board_info *new_dev; + + if (i2c_next_dev == MAX_SCU_I2C) { + pr_err("too many SCU I2C devices"); + return; + } + + new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); + if (!new_dev) { + pr_err("failed to alloc mem for delayed i2c dev %s\n", + idev->type); + return; + } + memcpy(new_dev, idev, sizeof(*idev)); + + i2c_bus[i2c_next_dev] = bus; + i2c_devs[i2c_next_dev++] = new_dev; +} + +/* Called by IPC driver */ +void intel_scu_devices_create(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_add(ipc_devs[i]); + + for (i = 0; i < spi_next_dev; i++) + spi_register_board_info(spi_devs[i], 1); + + for (i = 0; i < i2c_next_dev; i++) { + struct i2c_adapter *adapter; + struct i2c_client *client; + + adapter = i2c_get_adapter(i2c_bus[i]); + if (adapter) { + client = i2c_new_device(adapter, i2c_devs[i]); + if (!client) + pr_err("can't create i2c device %s\n", + i2c_devs[i]->type); + } else + i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); + } +} +EXPORT_SYMBOL_GPL(intel_scu_devices_create); + +/* Called by IPC driver */ +void intel_scu_devices_destroy(void) +{ + int i; + + for (i = 0; i < ipc_next_dev; i++) + platform_device_del(ipc_devs[i]); +} +EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); + +static void __init install_irq_resource(struct platform_device *pdev, int irq) +{ + /* Single threaded */ + static struct resource __initdata res = { + .name = "IRQ", + .flags = IORESOURCE_IRQ, + }; + res.start = irq; + platform_device_add_resources(pdev, &res, 1); +} + +static void __init sfi_handle_ipc_dev(struct platform_device *pdev) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_IPC && + !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(pdev); + break; + } + dev++; + } + pdev->dev.platform_data = pdata; + intel_scu_device_register(pdev); +} + +static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_SPI && + !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(spi_info); + break; + } + dev++; + } + spi_info->platform_data = pdata; + if (dev->delay) + intel_scu_spi_device_register(spi_info); + else + spi_register_board_info(spi_info, 1); +} + +static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info) +{ + const struct devs_id *dev = device_ids; + void *pdata = NULL; + + while (dev->name[0]) { + if (dev->type == SFI_DEV_TYPE_I2C && + !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) { + pdata = dev->get_platform_data(i2c_info); + break; + } + dev++; + } + i2c_info->platform_data = pdata; + + if (dev->delay) + intel_scu_i2c_device_register(bus, i2c_info); + else + i2c_register_board_info(bus, i2c_info, 1); + } + + +static int __init sfi_parse_devs(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_device_table_entry *pentry; + struct spi_board_info spi_info; + struct i2c_board_info i2c_info; + struct platform_device *pdev; + int num, i, bus; + int ioapic; + struct io_apic_irq_attr irq_attr; + + sb = (struct sfi_table_simple *)table; + num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); + pentry = (struct sfi_device_table_entry *)sb->pentry; + + for (i = 0; i < num; i++, pentry++) { + if (pentry->irq != (u8)0xff) { /* native RTE case */ + /* these SPI2 devices are not exposed to system as PCI + * devices, but they have separate RTE entry in IOAPIC + * so we have to enable them one by one here + */ + ioapic = mp_find_ioapic(pentry->irq); + irq_attr.ioapic = ioapic; + irq_attr.ioapic_pin = pentry->irq; + irq_attr.trigger = 1; + irq_attr.polarity = 1; + io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr); + } + switch (pentry->type) { + case SFI_DEV_TYPE_IPC: + /* ID as IRQ is a hack that will go away */ + pdev = platform_device_alloc(pentry->name, pentry->irq); + if (pdev == NULL) { + pr_err("out of memory for SFI platform device '%s'.\n", + pentry->name); + continue; + } + install_irq_resource(pdev, pentry->irq); + pr_debug("info[%2d]: IPC bus, name = %16.16s, " + "irq = 0x%2x\n", i, pentry->name, pentry->irq); + sfi_handle_ipc_dev(pdev); + break; + case SFI_DEV_TYPE_SPI: + memset(&spi_info, 0, sizeof(spi_info)); + strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); + spi_info.irq = pentry->irq; + spi_info.bus_num = pentry->host_num; + spi_info.chip_select = pentry->addr; + spi_info.max_speed_hz = pentry->max_freq; + pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, " + "irq = 0x%2x, max_freq = %d, cs = %d\n", i, + spi_info.bus_num, + spi_info.modalias, + spi_info.irq, + spi_info.max_speed_hz, + spi_info.chip_select); + sfi_handle_spi_dev(&spi_info); + break; + case SFI_DEV_TYPE_I2C: + memset(&i2c_info, 0, sizeof(i2c_info)); + bus = pentry->host_num; + strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); + i2c_info.irq = pentry->irq; + i2c_info.addr = pentry->addr; + pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, " + "irq = 0x%2x, addr = 0x%x\n", i, bus, + i2c_info.type, + i2c_info.irq, + i2c_info.addr); + sfi_handle_i2c_dev(bus, &i2c_info); + break; + case SFI_DEV_TYPE_UART: + case SFI_DEV_TYPE_HSI: + default: + ; + } + } + return 0; +} + +static int __init mrst_platform_init(void) +{ + sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); + sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); + return 0; +} +arch_initcall(mrst_platform_init); + +/* + * we will search these buttons in SFI GPIO table (by name) + * and register them dynamically. Please add all possible + * buttons here, we will shrink them if no GPIO found. + */ +static struct gpio_keys_button gpio_button[] = { + {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000}, + {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20}, + {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20}, + {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20}, + {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20}, + {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20}, + {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20}, + {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20}, + {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20}, +}; + +static struct gpio_keys_platform_data mrst_gpio_keys = { + .buttons = gpio_button, + .rep = 1, + .nbuttons = -1, /* will fill it after search */ +}; + +static struct platform_device pb_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &mrst_gpio_keys, + }, +}; + +/* + * Shrink the non-existent buttons, register the gpio button + * device if there is some + */ +static int __init pb_keys_init(void) +{ + struct gpio_keys_button *gb = gpio_button; + int i, num, good = 0; + + num = sizeof(gpio_button) / sizeof(struct gpio_keys_button); + for (i = 0; i < num; i++) { + gb[i].gpio = get_gpio_by_name(gb[i].desc); + if (gb[i].gpio == -1) + continue; + + if (i != good) + gb[good] = gb[i]; + good++; + } + + if (good) { + mrst_gpio_keys.nbuttons = good; + return platform_device_register(&pb_device); + } + return 0; +} +late_initcall(pb_keys_init); -- cgit v1.2.3-59-g8ed1b From 7f05dec3dd70f086870fdc1d40dbe30db1fe0994 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 9 Nov 2010 11:28:43 +0000 Subject: x86: mrst: Parse SFI timer table for all timer configs Penwell has APB timer based watchdog timers, it requires platform code to parse SFI MTMR tables in order to claim its timer. This patch will always parse SFI MTMR regardless of system timer configuration choices. Otherwise, SFI MTMR table may not get parsed if running on Medfield with always-on local APIC timers and constant TSC. Watchdog timer driver will then not get a timer to use. Signed-off-by: Jacob Pan Signed-off-by: Alan Cox LKML-Reference: <20101109112800.20591.10802.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner --- arch/x86/platform/mrst/mrst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index cfa1af24edd5..e6f4473fc05b 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -221,6 +221,7 @@ static unsigned long __init mrst_calibrate_tsc(void) void __init mrst_time_init(void) { + sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); switch (mrst_timer_options) { case MRST_TIMER_APBT_ONLY: break; @@ -236,7 +237,6 @@ void __init mrst_time_init(void) return; } /* we need at least one APB timer */ - sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); pre_init_apic_IRQ0(); apbt_time_init(); } -- cgit v1.2.3-59-g8ed1b From cfb505a7ebd4c84206b4cc7d9f966d864a2ac05a Mon Sep 17 00:00:00 2001 From: Alek Du Date: Wed, 10 Nov 2010 16:50:08 +0000 Subject: x86: mrst: Add Moorestown specific reboot/shutdown support Moorestowns needs to use a special IPC command to reboot or shutdown the platform. Signed-off-by: Alek Du Signed-off-by: Alan Cox LKML-Reference: <20101110164928.6365.94243.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner --- arch/x86/platform/mrst/mrst.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index e6f4473fc05b..c727d97f7f31 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -35,6 +35,7 @@ #include #include #include +#include /* @@ -268,6 +269,17 @@ static int mrst_i8042_detect(void) return 0; } +/* Reboot and power off are handled by the SCU on a MID device */ +static void mrst_power_off(void) +{ + intel_scu_ipc_simple_command(0xf1, 1); +} + +static void mrst_reboot(void) +{ + intel_scu_ipc_simple_command(0xf1, 0); +} + /* * Moorestown specific x86_init function overrides and early setup * calls. @@ -293,6 +305,10 @@ void __init x86_mrst_early_setup(void) legacy_pic = &null_legacy_pic; + /* Moorestown specific power_off/restart method */ + pm_power_off = mrst_power_off; + machine_ops.emergency_restart = mrst_reboot; + /* Avoid searching for BIOS MP tables */ x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.mpparse.get_smp_config = x86_init_uint_noop; -- cgit v1.2.3-59-g8ed1b From 7309282c90d251cde77fe3b520a8276e25315c49 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 10 Nov 2010 17:29:00 +0000 Subject: x86: mrst: Add vrtc driver which serves as a wall clock device Moorestown platform doesn't have a m146818 RTC device like traditional x86 PC, but a firmware emulated virtual RTC device(vrtc), which provides some basic RTC functions like get/set time. vrtc serves as the only wall clock device on Moorestown platform. [ tglx: Changed the exports to _GPL ] Signed-off-by: Feng Tang Signed-off-by: Jacob Pan Signed-off-by: Alan Cox LKML-Reference: <20101110172837.3311.40483.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/fixmap.h | 4 ++ arch/x86/include/asm/mrst-vrtc.h | 9 +++ arch/x86/include/asm/mrst.h | 10 +++- arch/x86/platform/mrst/Makefile | 1 + arch/x86/platform/mrst/mrst.c | 6 -- arch/x86/platform/mrst/vrtc.c | 120 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 143 insertions(+), 7 deletions(-) create mode 100644 arch/x86/include/asm/mrst-vrtc.h create mode 100644 arch/x86/platform/mrst/vrtc.c (limited to 'arch/x86') diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 4d293dced62f..139591a933f6 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -117,6 +117,10 @@ enum fixed_addresses { FIX_TEXT_POKE1, /* reserve 2 pages for text_poke() */ FIX_TEXT_POKE0, /* first page is last, because allocation is backward */ __end_of_permanent_fixed_addresses, + +#ifdef CONFIG_X86_MRST + FIX_LNW_VRTC, +#endif /* * 256 temporary boot-time mappings, used by early_ioremap(), * before ioremap() is functional. diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/mrst-vrtc.h new file mode 100644 index 000000000000..73668abdbedf --- /dev/null +++ b/arch/x86/include/asm/mrst-vrtc.h @@ -0,0 +1,9 @@ +#ifndef _MRST_VRTC_H +#define _MRST_VRTC_H + +extern unsigned char vrtc_cmos_read(unsigned char reg); +extern void vrtc_cmos_write(unsigned char val, unsigned char reg); +extern unsigned long vrtc_get_time(void); +extern int vrtc_set_mmss(unsigned long nowtime); + +#endif diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h index 283debd29fc0..719f00b28ff5 100644 --- a/arch/x86/include/asm/mrst.h +++ b/arch/x86/include/asm/mrst.h @@ -14,7 +14,9 @@ #include extern int pci_mrst_init(void); -int __init sfi_parse_mrtc(struct sfi_table_header *table); +extern int __init sfi_parse_mrtc(struct sfi_table_header *table); +extern int sfi_mrtc_num; +extern struct sfi_rtc_table_entry sfi_mrtc_array[]; /* * Medfield is the follow-up of Moorestown, it combines two chip solution into @@ -54,4 +56,10 @@ extern void hsu_early_console_init(void); extern void intel_scu_devices_create(void); extern void intel_scu_devices_destroy(void); +/* VRTC timer */ +#define MRST_VRTC_MAP_SZ (1024) +/*#define MRST_VRTC_PGOFFSET (0xc00) */ + +extern void mrst_rtc_init(void); + #endif /* _ASM_X86_MRST_H */ diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile index efbbc552fa95..4d3e256780be 100644 --- a/arch/x86/platform/mrst/Makefile +++ b/arch/x86/platform/mrst/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_X86_MRST) += mrst.o +obj-$(CONFIG_X86_MRST) += vrtc.o diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index c727d97f7f31..42a0351f302c 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -37,7 +37,6 @@ #include #include - /* * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, * cmdline option x86_mrst_timer can be used to override the configuration @@ -242,11 +241,6 @@ void __init mrst_time_init(void) apbt_time_init(); } -void __init mrst_rtc_init(void) -{ - sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); -} - void __cpuinit mrst_arch_setup(void) { if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27) diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c new file mode 100644 index 000000000000..4944bd521d2c --- /dev/null +++ b/arch/x86/platform/mrst/vrtc.c @@ -0,0 +1,120 @@ +/* + * vrtc.c: Driver for virtual RTC device on Intel MID platform + * + * (C) Copyright 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + * Note: + * VRTC is emulated by system controller firmware, the real HW + * RTC is located in the PMIC device. SCU FW shadows PMIC RTC + * in a memory mapped IO space that is visible to the host IA + * processor. + * + * This driver is based on RTC CMOS driver. + */ + +#include +#include +#include + +#include +#include +#include +#include + +static unsigned char __iomem *vrtc_virt_base; + +unsigned char vrtc_cmos_read(unsigned char reg) +{ + unsigned char retval; + + /* vRTC's registers range from 0x0 to 0xD */ + if (reg > 0xd || !vrtc_virt_base) + return 0xff; + + lock_cmos_prefix(reg); + retval = __raw_readb(vrtc_virt_base + (reg << 2)); + lock_cmos_suffix(reg); + return retval; +} +EXPORT_SYMBOL_GPL(vrtc_cmos_read); + +void vrtc_cmos_write(unsigned char val, unsigned char reg) +{ + if (reg > 0xd || !vrtc_virt_base) + return; + + lock_cmos_prefix(reg); + __raw_writeb(val, vrtc_virt_base + (reg << 2)); + lock_cmos_suffix(reg); +} +EXPORT_SYMBOL_GPL(vrtc_cmos_write); + +unsigned long vrtc_get_time(void) +{ + u8 sec, min, hour, mday, mon; + u32 year; + + while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP)) + cpu_relax(); + + sec = vrtc_cmos_read(RTC_SECONDS); + min = vrtc_cmos_read(RTC_MINUTES); + hour = vrtc_cmos_read(RTC_HOURS); + mday = vrtc_cmos_read(RTC_DAY_OF_MONTH); + mon = vrtc_cmos_read(RTC_MONTH); + year = vrtc_cmos_read(RTC_YEAR); + + /* vRTC YEAR reg contains the offset to 1960 */ + year += 1960; + + printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d " + "mon: %d year: %d\n", sec, min, hour, mday, mon, year); + + return mktime(year, mon, mday, hour, min, sec); +} + +/* Only care about the minutes and seconds */ +int vrtc_set_mmss(unsigned long nowtime) +{ + int real_sec, real_min; + int vrtc_min; + + vrtc_min = vrtc_cmos_read(RTC_MINUTES); + + real_sec = nowtime % 60; + real_min = nowtime / 60; + if (((abs(real_min - vrtc_min) + 15)/30) & 1) + real_min += 30; + real_min %= 60; + + vrtc_cmos_write(real_sec, RTC_SECONDS); + vrtc_cmos_write(real_min, RTC_MINUTES); + return 0; +} + +void __init mrst_rtc_init(void) +{ + unsigned long rtc_paddr; + void __iomem *virt_base; + + sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); + if (!sfi_mrtc_num) + return; + + rtc_paddr = sfi_mrtc_array[0].phys_addr; + + /* vRTC's register address may not be page aligned */ + set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr); + + virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC); + virt_base += rtc_paddr & ~PAGE_MASK; + vrtc_virt_base = virt_base; + + x86_platform.get_wallclock = vrtc_get_time; + x86_platform.set_wallclock = vrtc_set_mmss; +} -- cgit v1.2.3-59-g8ed1b From 0146f26145af75d53e12dbf23a36996aff373680 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 10 Nov 2010 17:29:17 +0000 Subject: rtc: Add drivers/rtc/rtc-mrst.c Provide the standard kernel rtc driver interface on top of the vrtc layer added in the previous patch. Signed-off-by: Feng Tang LKML-Reference: <20101110172911.3311.20593.stgit@localhost.localdomain> [Fixed swapped arguments on IPC] Signed-off-by: Arjan van de Ven [Cleaned up and the device creation moved to arch/x86/platform] Signed-off-by: Alan Cox Signed-off-by: Thomas Gleixner --- arch/x86/platform/mrst/vrtc.c | 46 ++++ drivers/rtc/Kconfig | 12 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-mrst.c | 578 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 637 insertions(+) create mode 100644 drivers/rtc/rtc-mrst.c (limited to 'arch/x86') diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c index 4944bd521d2c..4d3f770456f7 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/mrst/vrtc.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -118,3 +119,48 @@ void __init mrst_rtc_init(void) x86_platform.get_wallclock = vrtc_get_time; x86_platform.set_wallclock = vrtc_set_mmss; } + +/* + * The Moorestown platform has a memory mapped virtual RTC device that emulates + * the programming interface of the RTC. + */ + +static struct resource vrtc_resources[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, + [1] = { + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device vrtc_device = { + .name = "rtc_mrst", + .id = -1, + .resource = vrtc_resources, + .num_resources = ARRAY_SIZE(vrtc_resources), +}; + +/* Register the RTC device if appropriate */ +static int __init mrst_device_create(void) +{ + /* No Moorestown, no device */ + if (!mrst_identify_cpu()) + return -ENODEV; + /* No timer, no device */ + if (!sfi_mrtc_num) + return -ENODEV; + + /* iomem resource */ + vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr; + vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr + + MRST_VRTC_MAP_SZ; + /* irq resource */ + vrtc_resources[1].start = sfi_mrtc_array[0].irq; + vrtc_resources[1].end = sfi_mrtc_array[0].irq; + + platform_device_register(&vrtc_device); + return 0; +} + +module_init(mrst_device_create); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 2883428d5ac8..4941cade319f 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -463,6 +463,18 @@ config RTC_DRV_CMOS This driver can also be built as a module. If so, the module will be called rtc-cmos. +config RTC_DRV_VRTC + tristate "Virtual RTC for Moorestown platforms" + depends on X86_MRST + default y if X86_MRST + + help + Say "yes" here to get direct support for the real time clock + found on Moorestown platforms. The VRTC is a emulated RTC that + derives its clock source from a real RTC in the PMIC. The MC146818 + style programming interface is mostly conserved, but any + updates are done via IPC calls to the system controller FW. + config RTC_DRV_DS1216 tristate "Dallas DS1216" depends on SNI_RM diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 4c2832df4697..2afdaf3ff986 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o obj-$(CONFIG_RTC_DRV_COH901331) += rtc-coh901331.o obj-$(CONFIG_RTC_DRV_DAVINCI) += rtc-davinci.o obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o +obj-$(CONFIG_RTC_DRV_VRTC) += rtc-mrst.o obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c new file mode 100644 index 000000000000..67b6be2b874d --- /dev/null +++ b/drivers/rtc/rtc-mrst.c @@ -0,0 +1,578 @@ +/* + * rtc-mrst.c: Driver for Moorestown virtual RTC + * + * (C) Copyright 2009 Intel Corporation + * Author: Jacob Pan (jacob.jun.pan@intel.com) + * Feng Tang (feng.tang@intel.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + * Note: + * VRTC is emulated by system controller firmware, the real HW + * RTC is located in the PMIC device. SCU FW shadows PMIC RTC + * in a memory mapped IO space that is visible to the host IA + * processor. + * + * This driver is based upon drivers/rtc/rtc-cmos.c + */ + +/* + * Note: + * * vRTC only supports binary mode and 24H mode + * * vRTC only support PIE and AIE, no UIE, and its PIE only happens + * at 23:59:59pm everyday, no support for adjustable frequency + * * Alarm function is also limited to hr/min/sec. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +struct mrst_rtc { + struct rtc_device *rtc; + struct device *dev; + int irq; + struct resource *iomem; + + u8 enabled_wake; + u8 suspend_ctrl; +}; + +static const char driver_name[] = "rtc_mrst"; + +#define RTC_IRQMASK (RTC_PF | RTC_AF) + +static inline int is_intr(u8 rtc_intr) +{ + if (!(rtc_intr & RTC_IRQF)) + return 0; + return rtc_intr & RTC_IRQMASK; +} + +/* + * rtc_time's year contains the increment over 1900, but vRTC's YEAR + * register can't be programmed to value larger than 0x64, so vRTC + * driver chose to use 1960 (1970 is UNIX time start point) as the base, + * and does the translation at read/write time + */ +static int mrst_read_time(struct device *dev, struct rtc_time *time) +{ + unsigned long flags; + + if (rtc_is_updating()) + mdelay(20); + + spin_lock_irqsave(&rtc_lock, flags); + time->tm_sec = vrtc_cmos_read(RTC_SECONDS); + time->tm_min = vrtc_cmos_read(RTC_MINUTES); + time->tm_hour = vrtc_cmos_read(RTC_HOURS); + time->tm_mday = vrtc_cmos_read(RTC_DAY_OF_MONTH); + time->tm_mon = vrtc_cmos_read(RTC_MONTH); + time->tm_year = vrtc_cmos_read(RTC_YEAR); + spin_unlock_irqrestore(&rtc_lock, flags); + + /* Adjust for the 1960/1900 */ + time->tm_year += 60; + time->tm_mon--; + return RTC_24H; +} + +static int mrst_set_time(struct device *dev, struct rtc_time *time) +{ + int ret; + unsigned long flags; + unsigned char mon, day, hrs, min, sec; + unsigned int yrs; + + yrs = time->tm_year; + mon = time->tm_mon + 1; /* tm_mon starts at zero */ + day = time->tm_mday; + hrs = time->tm_hour; + min = time->tm_min; + sec = time->tm_sec; + + if (yrs < 70 || yrs > 138) + return -EINVAL; + yrs -= 60; + + spin_lock_irqsave(&rtc_lock, flags); + + vrtc_cmos_write(yrs, RTC_YEAR); + vrtc_cmos_write(mon, RTC_MONTH); + vrtc_cmos_write(day, RTC_DAY_OF_MONTH); + vrtc_cmos_write(hrs, RTC_HOURS); + vrtc_cmos_write(min, RTC_MINUTES); + vrtc_cmos_write(sec, RTC_SECONDS); + + spin_unlock_irqrestore(&rtc_lock, flags); + + ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME); + return ret; +} + +static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char rtc_control; + + if (mrst->irq <= 0) + return -EIO; + + /* Basic alarms only support hour, minute, and seconds fields. + * Some also support day and month, for alarms up to a year in + * the future. + */ + t->time.tm_mday = -1; + t->time.tm_mon = -1; + t->time.tm_year = -1; + + /* vRTC only supports binary mode */ + spin_lock_irq(&rtc_lock); + t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM); + t->time.tm_min = vrtc_cmos_read(RTC_MINUTES_ALARM); + t->time.tm_hour = vrtc_cmos_read(RTC_HOURS_ALARM); + + rtc_control = vrtc_cmos_read(RTC_CONTROL); + spin_unlock_irq(&rtc_lock); + + t->enabled = !!(rtc_control & RTC_AIE); + t->pending = 0; + + return 0; +} + +static void mrst_checkintr(struct mrst_rtc *mrst, unsigned char rtc_control) +{ + unsigned char rtc_intr; + + /* + * NOTE after changing RTC_xIE bits we always read INTR_FLAGS; + * allegedly some older rtcs need that to handle irqs properly + */ + rtc_intr = vrtc_cmos_read(RTC_INTR_FLAGS); + rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; + if (is_intr(rtc_intr)) + rtc_update_irq(mrst->rtc, 1, rtc_intr); +} + +static void mrst_irq_enable(struct mrst_rtc *mrst, unsigned char mask) +{ + unsigned char rtc_control; + + /* + * Flush any pending IRQ status, notably for update irqs, + * before we enable new IRQs + */ + rtc_control = vrtc_cmos_read(RTC_CONTROL); + mrst_checkintr(mrst, rtc_control); + + rtc_control |= mask; + vrtc_cmos_write(rtc_control, RTC_CONTROL); + + mrst_checkintr(mrst, rtc_control); +} + +static void mrst_irq_disable(struct mrst_rtc *mrst, unsigned char mask) +{ + unsigned char rtc_control; + + rtc_control = vrtc_cmos_read(RTC_CONTROL); + rtc_control &= ~mask; + vrtc_cmos_write(rtc_control, RTC_CONTROL); + mrst_checkintr(mrst, rtc_control); +} + +static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char hrs, min, sec; + int ret = 0; + + if (!mrst->irq) + return -EIO; + + hrs = t->time.tm_hour; + min = t->time.tm_min; + sec = t->time.tm_sec; + + spin_lock_irq(&rtc_lock); + /* Next rtc irq must not be from previous alarm setting */ + mrst_irq_disable(mrst, RTC_AIE); + + /* Update alarm */ + vrtc_cmos_write(hrs, RTC_HOURS_ALARM); + vrtc_cmos_write(min, RTC_MINUTES_ALARM); + vrtc_cmos_write(sec, RTC_SECONDS_ALARM); + + spin_unlock_irq(&rtc_lock); + + ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM); + if (ret) + return ret; + + spin_lock_irq(&rtc_lock); + if (t->enabled) + mrst_irq_enable(mrst, RTC_AIE); + + spin_unlock_irq(&rtc_lock); + + return 0; +} + +static int mrst_irq_set_state(struct device *dev, int enabled) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned long flags; + + if (!mrst->irq) + return -ENXIO; + + spin_lock_irqsave(&rtc_lock, flags); + + if (enabled) + mrst_irq_enable(mrst, RTC_PIE); + else + mrst_irq_disable(mrst, RTC_PIE); + + spin_unlock_irqrestore(&rtc_lock, flags); + return 0; +} + +#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE) + +/* Currently, the vRTC doesn't support UIE ON/OFF */ +static int +mrst_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned long flags; + + switch (cmd) { + case RTC_AIE_OFF: + case RTC_AIE_ON: + if (!mrst->irq) + return -EINVAL; + break; + default: + /* PIE ON/OFF is handled by mrst_irq_set_state() */ + return -ENOIOCTLCMD; + } + + spin_lock_irqsave(&rtc_lock, flags); + switch (cmd) { + case RTC_AIE_OFF: /* alarm off */ + mrst_irq_disable(mrst, RTC_AIE); + break; + case RTC_AIE_ON: /* alarm on */ + mrst_irq_enable(mrst, RTC_AIE); + break; + } + spin_unlock_irqrestore(&rtc_lock, flags); + return 0; +} + +#else +#define mrst_rtc_ioctl NULL +#endif + +#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE) + +static int mrst_procfs(struct device *dev, struct seq_file *seq) +{ + unsigned char rtc_control, valid; + + spin_lock_irq(&rtc_lock); + rtc_control = vrtc_cmos_read(RTC_CONTROL); + valid = vrtc_cmos_read(RTC_VALID); + spin_unlock_irq(&rtc_lock); + + return seq_printf(seq, + "periodic_IRQ\t: %s\n" + "alarm\t\t: %s\n" + "BCD\t\t: no\n" + "periodic_freq\t: daily (not adjustable)\n", + (rtc_control & RTC_PIE) ? "on" : "off", + (rtc_control & RTC_AIE) ? "on" : "off"); +} + +#else +#define mrst_procfs NULL +#endif + +static const struct rtc_class_ops mrst_rtc_ops = { + .ioctl = mrst_rtc_ioctl, + .read_time = mrst_read_time, + .set_time = mrst_set_time, + .read_alarm = mrst_read_alarm, + .set_alarm = mrst_set_alarm, + .proc = mrst_procfs, + .irq_set_state = mrst_irq_set_state, +}; + +static struct mrst_rtc mrst_rtc; + +/* + * When vRTC IRQ is captured by SCU FW, FW will clear the AIE bit in + * Reg B, so no need for this driver to clear it + */ +static irqreturn_t mrst_rtc_irq(int irq, void *p) +{ + u8 irqstat; + + spin_lock(&rtc_lock); + /* This read will clear all IRQ flags inside Reg C */ + irqstat = vrtc_cmos_read(RTC_INTR_FLAGS); + spin_unlock(&rtc_lock); + + irqstat &= RTC_IRQMASK | RTC_IRQF; + if (is_intr(irqstat)) { + rtc_update_irq(p, 1, irqstat); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int __init +vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq) +{ + int retval = 0; + unsigned char rtc_control; + + /* There can be only one ... */ + if (mrst_rtc.dev) + return -EBUSY; + + if (!iomem) + return -ENODEV; + + iomem = request_mem_region(iomem->start, + iomem->end + 1 - iomem->start, + driver_name); + if (!iomem) { + dev_dbg(dev, "i/o mem already in use.\n"); + return -EBUSY; + } + + mrst_rtc.irq = rtc_irq; + mrst_rtc.iomem = iomem; + + mrst_rtc.rtc = rtc_device_register(driver_name, dev, + &mrst_rtc_ops, THIS_MODULE); + if (IS_ERR(mrst_rtc.rtc)) { + retval = PTR_ERR(mrst_rtc.rtc); + goto cleanup0; + } + + mrst_rtc.dev = dev; + dev_set_drvdata(dev, &mrst_rtc); + rename_region(iomem, dev_name(&mrst_rtc.rtc->dev)); + + spin_lock_irq(&rtc_lock); + mrst_irq_disable(&mrst_rtc, RTC_PIE | RTC_AIE); + rtc_control = vrtc_cmos_read(RTC_CONTROL); + spin_unlock_irq(&rtc_lock); + + if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY))) + dev_dbg(dev, "TODO: support more than 24-hr BCD mode\n"); + + if (rtc_irq) { + retval = request_irq(rtc_irq, mrst_rtc_irq, + IRQF_DISABLED, dev_name(&mrst_rtc.rtc->dev), + mrst_rtc.rtc); + if (retval < 0) { + dev_dbg(dev, "IRQ %d is already in use, err %d\n", + rtc_irq, retval); + goto cleanup1; + } + } + dev_dbg(dev, "initialised\n"); + return 0; + +cleanup1: + mrst_rtc.dev = NULL; + rtc_device_unregister(mrst_rtc.rtc); +cleanup0: + release_region(iomem->start, iomem->end + 1 - iomem->start); + dev_err(dev, "rtc-mrst: unable to initialise\n"); + return retval; +} + +static void rtc_mrst_do_shutdown(void) +{ + spin_lock_irq(&rtc_lock); + mrst_irq_disable(&mrst_rtc, RTC_IRQMASK); + spin_unlock_irq(&rtc_lock); +} + +static void __exit rtc_mrst_do_remove(struct device *dev) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + struct resource *iomem; + + rtc_mrst_do_shutdown(); + + if (mrst->irq) + free_irq(mrst->irq, mrst->rtc); + + rtc_device_unregister(mrst->rtc); + mrst->rtc = NULL; + + iomem = mrst->iomem; + release_region(iomem->start, iomem->end + 1 - iomem->start); + mrst->iomem = NULL; + + mrst->dev = NULL; + dev_set_drvdata(dev, NULL); +} + +#ifdef CONFIG_PM +static int mrst_suspend(struct device *dev, pm_message_t mesg) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char tmp; + + /* Only the alarm might be a wakeup event source */ + spin_lock_irq(&rtc_lock); + mrst->suspend_ctrl = tmp = vrtc_cmos_read(RTC_CONTROL); + if (tmp & (RTC_PIE | RTC_AIE)) { + unsigned char mask; + + if (device_may_wakeup(dev)) + mask = RTC_IRQMASK & ~RTC_AIE; + else + mask = RTC_IRQMASK; + tmp &= ~mask; + vrtc_cmos_write(tmp, RTC_CONTROL); + + mrst_checkintr(mrst, tmp); + } + spin_unlock_irq(&rtc_lock); + + if (tmp & RTC_AIE) { + mrst->enabled_wake = 1; + enable_irq_wake(mrst->irq); + } + + dev_dbg(&mrst_rtc.rtc->dev, "suspend%s, ctrl %02x\n", + (tmp & RTC_AIE) ? ", alarm may wake" : "", + tmp); + + return 0; +} + +/* + * We want RTC alarms to wake us from the deep power saving state + */ +static inline int mrst_poweroff(struct device *dev) +{ + return mrst_suspend(dev, PMSG_HIBERNATE); +} + +static int mrst_resume(struct device *dev) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char tmp = mrst->suspend_ctrl; + + /* Re-enable any irqs previously active */ + if (tmp & RTC_IRQMASK) { + unsigned char mask; + + if (mrst->enabled_wake) { + disable_irq_wake(mrst->irq); + mrst->enabled_wake = 0; + } + + spin_lock_irq(&rtc_lock); + do { + vrtc_cmos_write(tmp, RTC_CONTROL); + + mask = vrtc_cmos_read(RTC_INTR_FLAGS); + mask &= (tmp & RTC_IRQMASK) | RTC_IRQF; + if (!is_intr(mask)) + break; + + rtc_update_irq(mrst->rtc, 1, mask); + tmp &= ~RTC_AIE; + } while (mask & RTC_AIE); + spin_unlock_irq(&rtc_lock); + } + + dev_dbg(&mrst_rtc.rtc->dev, "resume, ctrl %02x\n", tmp); + + return 0; +} + +#else +#define mrst_suspend NULL +#define mrst_resume NULL + +static inline int mrst_poweroff(struct device *dev) +{ + return -ENOSYS; +} + +#endif + +static int __init vrtc_mrst_platform_probe(struct platform_device *pdev) +{ + return vrtc_mrst_do_probe(&pdev->dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0), + platform_get_irq(pdev, 0)); +} + +static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev) +{ + rtc_mrst_do_remove(&pdev->dev); + return 0; +} + +static void vrtc_mrst_platform_shutdown(struct platform_device *pdev) +{ + if (system_state == SYSTEM_POWER_OFF && !mrst_poweroff(&pdev->dev)) + return; + + rtc_mrst_do_shutdown(); +} + +MODULE_ALIAS("platform:vrtc_mrst"); + +static struct platform_driver vrtc_mrst_platform_driver = { + .probe = vrtc_mrst_platform_probe, + .remove = __exit_p(vrtc_mrst_platform_remove), + .shutdown = vrtc_mrst_platform_shutdown, + .driver = { + .name = (char *) driver_name, + .suspend = mrst_suspend, + .resume = mrst_resume, + } +}; + +static int __init vrtc_mrst_init(void) +{ + return platform_driver_register(&vrtc_mrst_platform_driver); +} + +static void __exit vrtc_mrst_exit(void) +{ + platform_driver_unregister(&vrtc_mrst_platform_driver); +} + +module_init(vrtc_mrst_init); +module_exit(vrtc_mrst_exit); + +MODULE_AUTHOR("Jacob Pan; Feng Tang"); +MODULE_DESCRIPTION("Driver for Moorestown virtual RTC"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-59-g8ed1b From 86071535f845fd054753122e564cee9406c84e70 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 10 Nov 2010 17:40:48 +0000 Subject: x86: mrst: Add audio driver bindings This patch adds the sound card bindings for Moorestown (pmic_audio) and the Medfield platform (msic_audio) as IPC devices. This ensures they will be created at the right time. Signed-off-by: Vinod Koul Signed-off-by: Alan Cox LKML-Reference: <20101110174044.11340.78008.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner --- arch/x86/platform/mrst/mrst.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 42a0351f302c..237e28f0c122 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -499,6 +499,11 @@ static void __init *lis331dl_platform_data(void *info) return &intr2nd_pdata; } +static void __init *no_platform_data(void *info) +{ + return NULL; +} + static const struct devs_id __initconst device_ids[] = { {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data}, {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data}, @@ -506,6 +511,8 @@ static const struct devs_id __initconst device_ids[] = { {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data}, {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data}, {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data}, + {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, + {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data}, {}, }; -- cgit v1.2.3-59-g8ed1b From 6f207e9bb4219d261d9326597ca533f954f31755 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 11 Nov 2010 15:50:50 +0000 Subject: x86: mrst: Set vRTC's IRQ to level trigger type When setting up the mpc_intsrc structure for vRTC's IRQ, we need to set its irqflag to level trigger, otherwise it will be taken as edge triggered and the vRTC IRQ will fire only once, as there is never a EOI issued from the IA core for it. The original code worked in previous kernel. This is because it was configured to level trigger type by luck. It fell into the default PCI trigger category which is level triggered. Signed-off-by: Feng Tang Signed-off-by: Alan Cox LKML-Reference: <20101111155019.12924.569.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner --- arch/x86/platform/mrst/mrst.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index 237e28f0c122..fee0b4914e07 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -195,7 +195,7 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table) totallen, (u32)pentry->phys_addr, pentry->irq); mp_irq.type = MP_IOAPIC; mp_irq.irqtype = mp_INT; - mp_irq.irqflag = 0; + mp_irq.irqflag = 0xf; /* level trigger and active low */ mp_irq.srcbus = 0; mp_irq.srcbusirq = pentry->irq; /* IRQ */ mp_irq.dstapic = MP_APIC_ALL; -- cgit v1.2.3-59-g8ed1b From c751e17b5371ad86cdde6cf5c0175e06f3ff0347 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 9 Nov 2010 12:08:04 -0800 Subject: x86: Add CE4100 platform support Add CE4100 platform support. CE4100 needs early setup like moorestown. Signed-off-by: Thomas Gleixner Signed-off-by: Dirk Brandewie LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner --- Documentation/x86/boot.txt | 1 + arch/x86/Kconfig | 11 ++++++++++ arch/x86/include/asm/bootparam.h | 1 + arch/x86/include/asm/setup.h | 6 ++++++ arch/x86/kernel/head32.c | 3 +++ arch/x86/platform/Makefile | 1 + arch/x86/platform/ce4100/Makefile | 1 + arch/x86/platform/ce4100/ce4100.c | 42 +++++++++++++++++++++++++++++++++++++++ 8 files changed, 66 insertions(+) create mode 100644 arch/x86/platform/ce4100/Makefile create mode 100644 arch/x86/platform/ce4100/ce4100.c (limited to 'arch/x86') diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 30b43e1b2697..bdeb81ccb5f6 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -600,6 +600,7 @@ Protocol: 2.07+ 0x00000001 lguest 0x00000002 Xen 0x00000003 Moorestown MID + 0x00000004 CE4100 TV Platform Field name: hardware_subarch_data Type: write (subarch-dependent) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index b306b84fc8c8..43951c9c7435 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -377,6 +377,17 @@ config X86_ELAN If unsure, choose "PC-compatible" instead. +config X86_INTEL_CE + bool "CE4100 TV platform" + depends on PCI + depends on PCI_GODIRECT + depends on X86_32 + depends on X86_EXTENDED_PLATFORM + ---help--- + Select for the Intel CE media processor (CE4100) SOC. + This option compiles in support for the CE4100 SOC for settop + boxes and media devices. + config X86_MRST bool "Moorestown MID platform" depends on PCI diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index 8e6218550e77..c8bfe63a06de 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -124,6 +124,7 @@ enum { X86_SUBARCH_LGUEST, X86_SUBARCH_XEN, X86_SUBARCH_MRST, + X86_SUBARCH_CE4100, X86_NR_SUBARCHS, }; diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index d6763b139a84..db8aa19a08a2 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -53,6 +53,12 @@ extern void x86_mrst_early_setup(void); static inline void x86_mrst_early_setup(void) { } #endif +#ifdef CONFIG_X86_INTEL_CE +extern void x86_ce4100_early_setup(void); +#else +static inline void x86_ce4100_early_setup(void) { } +#endif + #ifndef _SETUP /* diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 763310165fa0..7f138b3c3c52 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -61,6 +61,9 @@ void __init i386_start_kernel(void) case X86_SUBARCH_MRST: x86_mrst_early_setup(); break; + case X86_SUBARCH_CE4100: + x86_ce4100_early_setup(); + break; default: i386_default_early_setup(); break; diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index 7bf70b812fa2..a019bc3088a0 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -1,4 +1,5 @@ # Platform specific code goes here +obj-y += ce4100/ obj-y += efi/ obj-y += mrst/ obj-y += olpc/ diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile new file mode 100644 index 000000000000..91fc92971d94 --- /dev/null +++ b/arch/x86/platform/ce4100/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_X86_INTEL_CE) += ce4100.o diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c new file mode 100644 index 000000000000..0ede12bde456 --- /dev/null +++ b/arch/x86/platform/ce4100/ce4100.c @@ -0,0 +1,42 @@ +/* + * Intel CE4100 platform specific setup code + * + * (C) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include +#include +#include +#include + +#include + +static int ce4100_i8042_detect(void) +{ + return 0; +} + +static void __init sdv_arch_setup(void) +{ +} + +static void __init sdv_find_smp_config(void) +{ +} + +/* + * CE4100 specific x86_init function overrides and early setup + * calls. + */ +void __init x86_ce4100_early_setup(void) +{ + x86_init.oem.arch_setup = sdv_arch_setup; + x86_platform.i8042_detect = ce4100_i8042_detect; + x86_init.resources.probe_roms = x86_init_noop; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; + x86_init.mpparse.find_smp_config = sdv_find_smp_config; +} -- cgit v1.2.3-59-g8ed1b From 91d8037f563e4a86ff8b02c994530989c7936427 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 9 Nov 2010 12:08:05 -0800 Subject: ce4100: Add PCI register emulation for CE4100 This patch provides access methods for PCI registers that mis-behave on the CE4100. Each register can be assigned a private init, read and write routine. The exception to this is the bridge device. The bridge device is the only device on bus zero (0) that requires any fixup so it is a special case. [ tglx: minor coding style cleanups, __init annotation and simplification of ce4100_conf_read/write ] Signed-off-by: Dirk Brandewie LKML-Reference: <40b6751381c2275dc359db5a17989cce22ad8db7.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner --- arch/x86/pci/Makefile | 1 + arch/x86/pci/ce4100.c | 315 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 316 insertions(+) create mode 100644 arch/x86/pci/ce4100.c (limited to 'arch/x86') diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index effd96e33f16..6b8759f7634e 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PCI_OLPC) += olpc.o obj-$(CONFIG_PCI_XEN) += xen.o obj-y += fixup.o +obj-$(CONFIG_X86_INTEL_CE) += ce4100.o obj-$(CONFIG_ACPI) += acpi.o obj-y += legacy.o irq.o diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c new file mode 100644 index 000000000000..85b68ef5e809 --- /dev/null +++ b/arch/x86/pci/ce4100.c @@ -0,0 +1,315 @@ +/* + * GPL LICENSE SUMMARY + * + * Copyright(c) 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Corporation + * 2200 Mission College Blvd. + * Santa Clara, CA 97052 + * + * This provides access methods for PCI registers that mis-behave on + * the CE4100. Each register can be assigned a private init, read and + * write routine. The exception to this is the bridge device. The + * bridge device is the only device on bus zero (0) that requires any + * fixup so it is a special case ATM + */ + +#include +#include +#include + +#include + +struct sim_reg { + u32 value; + u32 mask; +}; + +struct sim_dev_reg { + int dev_func; + int reg; + void (*init)(struct sim_dev_reg *reg); + void (*read)(struct sim_dev_reg *reg, u32 *value); + void (*write)(struct sim_dev_reg *reg, u32 value); + struct sim_reg sim_reg; +}; + +struct sim_reg_op { + void (*init)(struct sim_dev_reg *reg); + void (*read)(struct sim_dev_reg *reg, u32 value); + void (*write)(struct sim_dev_reg *reg, u32 value); +}; + +#define MB (1024 * 1024) +#define KB (1024) +#define SIZE_TO_MASK(size) (~(size - 1)) + +#define DEFINE_REG(device, func, offset, size, init_op, read_op, write_op)\ +{ PCI_DEVFN(device, func), offset, init_op, read_op, write_op,\ + {0, SIZE_TO_MASK(size)} }, + +static void reg_init(struct sim_dev_reg *reg) +{ + pci_direct_conf1.read(0, 1, reg->dev_func, reg->reg, 4, + ®->sim_reg.value); +} + +static void reg_read(struct sim_dev_reg *reg, u32 *value) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pci_config_lock, flags); + *value = reg->sim_reg.value; + raw_spin_unlock_irqrestore(&pci_config_lock, flags); +} + +static void reg_write(struct sim_dev_reg *reg, u32 value) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&pci_config_lock, flags); + reg->sim_reg.value = (value & reg->sim_reg.mask) | + (reg->sim_reg.value & ~reg->sim_reg.mask); + raw_spin_unlock_irqrestore(&pci_config_lock, flags); +} + +static void sata_reg_init(struct sim_dev_reg *reg) +{ + pci_direct_conf1.read(0, 1, PCI_DEVFN(14, 0), 0x10, 4, + ®->sim_reg.value); + reg->sim_reg.value += 0x400; +} + +static void ehci_reg_read(struct sim_dev_reg *reg, u32 *value) +{ + reg_read(reg, value); + if (*value != reg->sim_reg.mask) + *value |= 0x100; +} + +void sata_revid_init(struct sim_dev_reg *reg) +{ + reg->sim_reg.value = 0x01060100; + reg->sim_reg.mask = 0; +} + +static void sata_revid_read(struct sim_dev_reg *reg, u32 *value) +{ + reg_read(reg, value); +} + +static struct sim_dev_reg bus1_fixups[] = { + DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write) + DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write) + DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write) + DEFINE_REG(6, 2, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(8, 0, 0x10, (1*MB), reg_init, reg_read, reg_write) + DEFINE_REG(8, 1, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(8, 2, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(9, 0, 0x10 , (1*MB), reg_init, reg_read, reg_write) + DEFINE_REG(9, 0, 0x14, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(10, 0, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(10, 0, 0x14, (256*MB), reg_init, reg_read, reg_write) + DEFINE_REG(11, 0, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 0, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 1, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 2, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 2, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 2, 0x18, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 3, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 3, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 4, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write) + DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write) + DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write) + DEFINE_REG(13, 0, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write) + DEFINE_REG(13, 1, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write) + DEFINE_REG(14, 0, 0x8, 0, sata_revid_init, sata_revid_read, 0) + DEFINE_REG(14, 0, 0x10, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x14, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x18, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x1C, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x20, 0, reg_init, reg_read, reg_write) + DEFINE_REG(14, 0, 0x24, (0x200), sata_reg_init, reg_read, reg_write) + DEFINE_REG(15, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(15, 0, 0x14, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write) + DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write) + DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write) + DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write) +}; + +static void __init init_sim_regs(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { + if (bus1_fixups[i].init) + bus1_fixups[i].init(&bus1_fixups[i]); + } +} + +static inline void extract_bytes(u32 *value, int reg, int len) +{ + uint32_t mask; + + *value >>= ((reg & 3) * 8); + mask = 0xFFFFFFFF >> ((4 - len) * 8); + *value &= mask; +} + +int bridge_read(unsigned int devfn, int reg, int len, u32 *value) +{ + u32 av_bridge_base, av_bridge_limit; + int retval = 0; + + switch (reg) { + /* Make BARs appear to not request any memory. */ + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_0 + 1: + case PCI_BASE_ADDRESS_0 + 2: + case PCI_BASE_ADDRESS_0 + 3: + *value = 0; + break; + + /* Since subordinate bus number register is hardwired + * to zero and read only, so do the simulation. + */ + case PCI_PRIMARY_BUS: + if (len == 4) + *value = 0x00010100; + break; + + case PCI_SUBORDINATE_BUS: + *value = 1; + break; + + case PCI_MEMORY_BASE: + case PCI_MEMORY_LIMIT: + /* Get the A/V bridge base address. */ + pci_direct_conf1.read(0, 0, devfn, + PCI_BASE_ADDRESS_0, 4, &av_bridge_base); + + av_bridge_limit = av_bridge_base + (512*MB - 1); + av_bridge_limit >>= 16; + av_bridge_limit &= 0xFFF0; + + av_bridge_base >>= 16; + av_bridge_base &= 0xFFF0; + + if (reg == PCI_MEMORY_LIMIT) + *value = av_bridge_limit; + else if (len == 2) + *value = av_bridge_base; + else + *value = (av_bridge_limit << 16) | av_bridge_base; + break; + /* Make prefetchable memory limit smaller than prefetchable + * memory base, so not claim prefetchable memory space. + */ + case PCI_PREF_MEMORY_BASE: + *value = 0xFFF0; + break; + case PCI_PREF_MEMORY_LIMIT: + *value = 0x0; + break; + /* Make IO limit smaller than IO base, so not claim IO space. */ + case PCI_IO_BASE: + *value = 0xF0; + break; + case PCI_IO_LIMIT: + *value = 0; + break; + default: + retval = 1; + } + return retval; +} + +static int ce4100_conf_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + int i, retval = 1; + + if (bus == 1) { + for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { + if (bus1_fixups[i].dev_func == devfn && + bus1_fixups[i].reg == (reg & ~3) && + bus1_fixups[i].read) { + bus1_fixups[i].read(&(bus1_fixups[i]), + value); + extract_bytes(value, reg, len); + return 0; + } + } + } + + if (bus == 0 && (PCI_DEVFN(1, 0) == devfn) && + !bridge_read(devfn, reg, len, value)) + return 0; + + return pci_direct_conf1.read(seg, bus, devfn, reg, len, value); +} + +static int ce4100_conf_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + int i; + + if (bus == 1) { + for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { + if (bus1_fixups[i].dev_func == devfn && + bus1_fixups[i].reg == (reg & ~3) && + bus1_fixups[i].write) { + bus1_fixups[i].write(&(bus1_fixups[i]), + value); + return 0; + } + } + } + + /* Discard writes to A/V bridge BAR. */ + if (bus == 0 && PCI_DEVFN(1, 0) == devfn && + ((reg & ~3) == PCI_BASE_ADDRESS_0)) + return 0; + + return pci_direct_conf1.write(seg, bus, devfn, reg, len, value); +} + +struct pci_raw_ops ce4100_pci_conf = { + .read = ce4100_conf_read, + .write = ce4100_conf_write, +}; + +static int __init ce4100_pci_init(void) +{ + init_sim_regs(); + raw_pci_ops = &ce4100_pci_conf; + return 0; +} +subsys_initcall(ce4100_pci_init); -- cgit v1.2.3-59-g8ed1b From 37bc9f5078c62bfa73edeb0053edceb3ed5e46a4 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Tue, 9 Nov 2010 12:08:08 -0800 Subject: x86: Ce4100: Add reboot_fixup() for CE4100 This patch adds the CE4100 reboot fixup to reboot_fixups_32.c [ tglx: Moved PCI id to reboot_fixups_32.c ] Signed-off-by: Dirk Brandewie LKML-Reference: <5bdcfb4f0206fa721570504e95659a03b815bc5e.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 1 + arch/x86/kernel/reboot_fixups_32.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 43951c9c7435..e5510cf0666f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -383,6 +383,7 @@ config X86_INTEL_CE depends on PCI_GODIRECT depends on X86_32 depends on X86_EXTENDED_PLATFORM + select X86_REBOOTFIXUPS ---help--- Select for the Intel CE media processor (CE4100) SOC. This option compiles in support for the CE4100 SOC for settop diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index fda313ebbb03..c8e41e90f59c 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -43,17 +43,33 @@ static void rdc321x_reset(struct pci_dev *dev) outb(1, 0x92); } +static void ce4100_reset(struct pci_dev *dev) +{ + int i; + + for (i = 0; i < 10; i++) { + outb(0x2, 0xcf9); + udelay(50); + } +} + struct device_fixup { unsigned int vendor; unsigned int device; void (*reboot_fixup)(struct pci_dev *); }; +/* + * PCI ids solely used for fixups_table go here + */ +#define PCI_DEVICE_ID_INTEL_CE4100 0x0708 + static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, { PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset }, +{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100, ce4100_reset }, }; /* -- cgit v1.2.3-59-g8ed1b From b9fc71f47dc060c588e5099638242fad44eeecbc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 15 Nov 2010 17:31:19 +0000 Subject: x86, mrst: The shutdown for MRST requires the SCU IPC mechanism Fix the build failure reported by Randy. Reported-by: Randy Dunlap Signed-off-by: Alan Cox LKML-Reference: <20101115173110.6877.83958.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e5510cf0666f..6e877b90ed2d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -399,6 +399,7 @@ config X86_MRST select APB_TIMER select I2C select SPI + select INTEL_SCU_IPC ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: -- cgit v1.2.3-59-g8ed1b From ad02519a0d27da4a0a50cbc696e810c94e27c28e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 15 Nov 2010 10:14:06 -0800 Subject: x86, mrst: Fix dependencies of "select INTEL_SCU_IPC" commit b9fc71f47 (x86, mrst: The shutdown for MRST requires the SCU IPC mechanism) introduced the following warning: warning: (X86_MRST && PCI && PCI_GOANY && X86_32 && X86_EXTENDED_PLATFORM && X86_IO_APIC) selects INTEL_SCU_IPC which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && X86_MRST) which is due to the hierarchical menu structure. Select X86_PLATFORM_DEVICES as well. Originally-from: Randy Dunlap Signed-off-by: Thomas Gleixner LKML-Reference: <20101115101406.77e072ef.randy.dunlap@oracle.com> Cc: Alan Cox --- arch/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6e877b90ed2d..655fcf5ac690 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -400,6 +400,7 @@ config X86_MRST select I2C select SPI select INTEL_SCU_IPC + select X86_PLATFORM_DEVICES ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: -- cgit v1.2.3-59-g8ed1b From 82148d1d0b2f369851f2dff5088f7840f9f16abf Mon Sep 17 00:00:00 2001 From: Shérab Date: Sat, 25 Sep 2010 06:06:57 +0200 Subject: x86/platform: Add Eurobraille/Iris power off support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Iris machines from Eurobraille do not have APM or ACPI support to shut themselves down properly. A special I/O sequence is needed to do so. This modle runs this I/O sequence at kernel shutdown when its force parameter is set to 1. Signed-off-by: Shérab Acked-by: "H. Peter Anvin" [ did minor coding style edits ] Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 13 +++++++ arch/x86/kernel/Makefile | 1 + arch/x86/kernel/iris.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 105 insertions(+) create mode 100644 arch/x86/kernel/iris.c (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 655fcf5ac690..6ab63107eeaf 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -482,6 +482,19 @@ config X86_ES7000 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is supposed to run on an IA32-based Unisys ES7000 system. +config X86_32_IRIS + tristate "Eurobraille/Iris poweroff module" + depends on X86_32 + ---help--- + The Iris machines from EuroBraille do not have APM or ACPI support + to shut themselves down properly. A special I/O sequence is + needed to do so, which is what this module does at + kernel shutdown. + + This is only for Iris machines from EuroBraille. + + If unused, say N. + config SCHED_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9e13763b6092..beac17a0fcab 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o +obj-$(CONFIG_X86_32_IRIS) += iris.o ### # 64 bit specific files diff --git a/arch/x86/kernel/iris.c b/arch/x86/kernel/iris.c new file mode 100644 index 000000000000..1ba7f5ed8c9b --- /dev/null +++ b/arch/x86/kernel/iris.c @@ -0,0 +1,91 @@ +/* + * Eurobraille/Iris power off support. + * + * Eurobraille's Iris machine is a PC with no APM or ACPI support. + * It is shutdown by a special I/O sequence which this module provides. + * + * Copyright (C) Shérab + * + * This program is free software ; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation ; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY ; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the program ; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define IRIS_GIO_BASE 0x340 +#define IRIS_GIO_INPUT IRIS_GIO_BASE +#define IRIS_GIO_OUTPUT (IRIS_GIO_BASE + 1) +#define IRIS_GIO_PULSE 0x80 /* First byte to send */ +#define IRIS_GIO_REST 0x00 /* Second byte to send */ +#define IRIS_GIO_NODEV 0xff /* Likely not an Iris */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sébastien Hinderer "); +MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille"); +MODULE_SUPPORTED_DEVICE("Eurobraille/Iris"); + +static int force; + +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation."); + +static void (*old_pm_power_off)(void); + +static void iris_power_off(void) +{ + outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT); + msleep(850); + outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT); +} + +/* + * Before installing the power_off handler, try to make sure the OS is + * running on an Iris. Since Iris does not support DMI, this is done + * by reading its input port and seeing whether the read value is + * meaningful. + */ +static int iris_init(void) +{ + unsigned char status; + if (force != 1) { + printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n"); + return -ENODEV; + } + status = inb(IRIS_GIO_INPUT); + if (status == IRIS_GIO_NODEV) { + printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n"); + return -ENODEV; + } + old_pm_power_off = pm_power_off; + pm_power_off = &iris_power_off; + printk(KERN_INFO "Iris power_off handler installed.\n"); + + return 0; +} + +static void iris_exit(void) +{ + pm_power_off = old_pm_power_off; + printk(KERN_INFO "Iris power_off handler uninstalled.\n"); +} + +module_init(iris_init); +module_exit(iris_exit); -- cgit v1.2.3-59-g8ed1b From 5ca9afdb9f6a5267927b54de3f42c756e8af7fcd Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Thu, 18 Nov 2010 21:16:45 +0300 Subject: x86, mrst: Check platform_device_register() return code platform_device_register() may fail, if so propagate the return code from mrst_device_create(). Signed-off-by: Vasiliy Kulikov LKML-Reference: <1290104207-31279-1-git-send-email-segoon@openwall.com> Acked-by: Alan Cox Signed-off-by: H. Peter Anvin --- arch/x86/platform/mrst/vrtc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c index 4d3f770456f7..32cd7edd71a0 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/mrst/vrtc.c @@ -159,8 +159,7 @@ static int __init mrst_device_create(void) vrtc_resources[1].start = sfi_mrtc_array[0].irq; vrtc_resources[1].end = sfi_mrtc_array[0].irq; - platform_device_register(&vrtc_device); - return 0; + return platform_device_register(&vrtc_device); } module_init(mrst_device_create); -- cgit v1.2.3-59-g8ed1b From 9cdca869724e766eb48c061967cb777ddb436c76 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 20 Nov 2010 10:37:05 +0100 Subject: x86: platform: Move iris to x86/platform where it belongs Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 1 - arch/x86/kernel/iris.c | 91 ----------------------------------------- arch/x86/platform/Makefile | 1 + arch/x86/platform/iris/Makefile | 1 + arch/x86/platform/iris/iris.c | 91 +++++++++++++++++++++++++++++++++++++++++ 5 files changed, 93 insertions(+), 92 deletions(-) delete mode 100644 arch/x86/kernel/iris.c create mode 100644 arch/x86/platform/iris/Makefile create mode 100644 arch/x86/platform/iris/iris.c (limited to 'arch/x86') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index beac17a0fcab..9e13763b6092 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -109,7 +109,6 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o -obj-$(CONFIG_X86_32_IRIS) += iris.o ### # 64 bit specific files diff --git a/arch/x86/kernel/iris.c b/arch/x86/kernel/iris.c deleted file mode 100644 index 1ba7f5ed8c9b..000000000000 --- a/arch/x86/kernel/iris.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Eurobraille/Iris power off support. - * - * Eurobraille's Iris machine is a PC with no APM or ACPI support. - * It is shutdown by a special I/O sequence which this module provides. - * - * Copyright (C) Shérab - * - * This program is free software ; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation ; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY ; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with the program ; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define IRIS_GIO_BASE 0x340 -#define IRIS_GIO_INPUT IRIS_GIO_BASE -#define IRIS_GIO_OUTPUT (IRIS_GIO_BASE + 1) -#define IRIS_GIO_PULSE 0x80 /* First byte to send */ -#define IRIS_GIO_REST 0x00 /* Second byte to send */ -#define IRIS_GIO_NODEV 0xff /* Likely not an Iris */ - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sébastien Hinderer "); -MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille"); -MODULE_SUPPORTED_DEVICE("Eurobraille/Iris"); - -static int force; - -module_param(force, bool, 0); -MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation."); - -static void (*old_pm_power_off)(void); - -static void iris_power_off(void) -{ - outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT); - msleep(850); - outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT); -} - -/* - * Before installing the power_off handler, try to make sure the OS is - * running on an Iris. Since Iris does not support DMI, this is done - * by reading its input port and seeing whether the read value is - * meaningful. - */ -static int iris_init(void) -{ - unsigned char status; - if (force != 1) { - printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n"); - return -ENODEV; - } - status = inb(IRIS_GIO_INPUT); - if (status == IRIS_GIO_NODEV) { - printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n"); - return -ENODEV; - } - old_pm_power_off = pm_power_off; - pm_power_off = &iris_power_off; - printk(KERN_INFO "Iris power_off handler installed.\n"); - - return 0; -} - -static void iris_exit(void) -{ - pm_power_off = old_pm_power_off; - printk(KERN_INFO "Iris power_off handler uninstalled.\n"); -} - -module_init(iris_init); -module_exit(iris_exit); diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index a019bc3088a0..021eee91c056 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -1,6 +1,7 @@ # Platform specific code goes here obj-y += ce4100/ obj-y += efi/ +obj-y += iris/ obj-y += mrst/ obj-y += olpc/ obj-y += scx200/ diff --git a/arch/x86/platform/iris/Makefile b/arch/x86/platform/iris/Makefile new file mode 100644 index 000000000000..db921983a102 --- /dev/null +++ b/arch/x86/platform/iris/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_X86_32_IRIS) += iris.o diff --git a/arch/x86/platform/iris/iris.c b/arch/x86/platform/iris/iris.c new file mode 100644 index 000000000000..1ba7f5ed8c9b --- /dev/null +++ b/arch/x86/platform/iris/iris.c @@ -0,0 +1,91 @@ +/* + * Eurobraille/Iris power off support. + * + * Eurobraille's Iris machine is a PC with no APM or ACPI support. + * It is shutdown by a special I/O sequence which this module provides. + * + * Copyright (C) Shérab + * + * This program is free software ; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation ; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY ; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the program ; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define IRIS_GIO_BASE 0x340 +#define IRIS_GIO_INPUT IRIS_GIO_BASE +#define IRIS_GIO_OUTPUT (IRIS_GIO_BASE + 1) +#define IRIS_GIO_PULSE 0x80 /* First byte to send */ +#define IRIS_GIO_REST 0x00 /* Second byte to send */ +#define IRIS_GIO_NODEV 0xff /* Likely not an Iris */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sébastien Hinderer "); +MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille"); +MODULE_SUPPORTED_DEVICE("Eurobraille/Iris"); + +static int force; + +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation."); + +static void (*old_pm_power_off)(void); + +static void iris_power_off(void) +{ + outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT); + msleep(850); + outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT); +} + +/* + * Before installing the power_off handler, try to make sure the OS is + * running on an Iris. Since Iris does not support DMI, this is done + * by reading its input port and seeing whether the read value is + * meaningful. + */ +static int iris_init(void) +{ + unsigned char status; + if (force != 1) { + printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n"); + return -ENODEV; + } + status = inb(IRIS_GIO_INPUT); + if (status == IRIS_GIO_NODEV) { + printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n"); + return -ENODEV; + } + old_pm_power_off = pm_power_off; + pm_power_off = &iris_power_off; + printk(KERN_INFO "Iris power_off handler installed.\n"); + + return 0; +} + +static void iris_exit(void) +{ + pm_power_off = old_pm_power_off; + printk(KERN_INFO "Iris power_off handler uninstalled.\n"); +} + +module_init(iris_init); +module_exit(iris_exit); -- cgit v1.2.3-59-g8ed1b From 5ec6960f6f0c7be9cc6e5506fdf0070add3b6e08 Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Mon, 22 Nov 2010 06:28:48 -0800 Subject: ce4100: Add errata fixes for UART on CE4100 This patch enables the UART on the CE4100. The UART has a couple of issues that need to be worked around. First the UART is mostly PC compatible except that it is clocked eight times faster than a standard PC so the default configuration provided in arch/x86/include/asm/serial.h needs to be overridden. Second the TX interrupt may not be set correctly all the time. Lastly accessing the UART via I/O space for early_prink() hangs the chip when the IOAPIC is enabled. A custom mem_serial_in() is provided to work around the TX interrupt issue. The configuration issues are dealt with in the call back registered with the 8250 driver via serial8250_set_isa_configurator() Signed-off-by: Dirk Brandewie LKML-Reference: <1290436128-17958-1-git-send-email-dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner --- arch/x86/platform/ce4100/ce4100.c | 94 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 92 insertions(+), 2 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index 0ede12bde456..d2c0d51a7178 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -12,20 +12,110 @@ #include #include #include +#include +#include #include +#include static int ce4100_i8042_detect(void) { return 0; } -static void __init sdv_arch_setup(void) +static void __init sdv_find_smp_config(void) { } -static void __init sdv_find_smp_config(void) +#ifdef CONFIG_SERIAL_8250 + + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = offset << p->regshift; + return readl(p->membase + offset); +} + +/* + * The UART Tx interrupts are not set under some conditions and therefore serial + * transmission hangs. This is a silicon issue and has not been root caused. The + * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT + * bit of LSR register in interrupt handler to see whether at least one of these + * two bits is set, if so then process the transmit request. If this workaround + * is not applied, then the serial transmission may hang. This workaround is for + * errata number 9 in Errata - B step. +*/ + +static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset) +{ + unsigned int ret, ier, lsr; + + if (offset == UART_IIR) { + offset = offset << p->regshift; + ret = readl(p->membase + offset); + if (ret & UART_IIR_NO_INT) { + /* see if the TX interrupt should have really set */ + ier = mem_serial_in(p, UART_IER); + /* see if the UART's XMIT interrupt is enabled */ + if (ier & UART_IER_THRI) { + lsr = mem_serial_in(p, UART_LSR); + /* now check to see if the UART should be + generating an interrupt (but isn't) */ + if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) + ret &= ~UART_IIR_NO_INT; + } + } + } else + ret = mem_serial_in(p, offset); + return ret; +} + +static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = offset << p->regshift; + writel(value, p->membase + offset); +} + +static void ce4100_serial_fixup(int port, struct uart_port *up, + unsigned short *capabilites) +{ +#ifdef CONFIG_EARLY_PRINTK + /* + * Over ride the legacy port configuration that comes from + * asm/serial.h. Using the ioport driver then switching to the + * PCI memmaped driver hangs the IOAPIC + */ + if (up->iotype != UPIO_MEM32) { + up->uartclk = 14745600; + up->mapbase = 0xdffe0200; + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, + up->mapbase & PAGE_MASK); + up->membase = + (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + up->membase += up->mapbase & ~PAGE_MASK; + up->iotype = UPIO_MEM32; + up->regshift = 2; + } +#endif + up->iobase = 0; + up->serial_in = ce4100_mem_serial_in; + up->serial_out = ce4100_mem_serial_out; + + *capabilites |= (1 << 12); +} + +static __init void sdv_serial_fixup(void) +{ + serial8250_set_isa_configurator(ce4100_serial_fixup); +} + +#else +static inline void sdv_serial_fixup(void); +#endif + +static void __init sdv_arch_setup(void) { + sdv_serial_fixup(); } /* -- cgit v1.2.3-59-g8ed1b From e4d2ebcab11b308b5b59073578efd33eccd55d46 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 3 Dec 2010 11:51:38 +0800 Subject: x86, apbt: Setup affinity for apb timers acting as per-cpu timer Commit a5ef2e70 "x86: Sanitize apb timer interrupt handling" forgot the affinity setup when cleaning up the code, this patch just adds the forgotten part Signed-off-by: Feng Tang Cc: Jacob Pan Cc: Alan Cox LKML-Reference: <1291348298-21263-2-git-send-email-feng.tang@intel.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apb_timer.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/x86') diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 92543c73cf8e..7c9ab59653e8 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -315,6 +315,7 @@ static void apbt_setup_irq(struct apbt_dev *adev) if (system_state == SYSTEM_BOOTING) { irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT); + irq_set_affinity(adev->irq, cpumask_of(adev->cpu)); /* APB timer irqs are set up as mp_irqs, timer is edge type */ __set_irq_handler(adev->irq, handle_edge_irq, 0, "edge"); if (request_irq(adev->irq, apbt_interrupt_handler, -- cgit v1.2.3-59-g8ed1b From 991cfffa7c19aa648546aff666595af896e568ba Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Fri, 3 Dec 2010 11:51:37 +0800 Subject: x86, earlyprintk: Move mrst early console to platform/ and fix a typo Move the code to arch/x86/platform/mrst/. Also fix a typo to use the correct config option: ONFIG_EARLY_PRINTK_MRST Signed-off-by: Feng Tang Cc: alan@linux.intel.com LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 1 - arch/x86/kernel/early_printk.c | 3 +- arch/x86/kernel/early_printk_mrst.c | 319 ----------------------------- arch/x86/platform/mrst/Makefile | 1 + arch/x86/platform/mrst/early_printk_mrst.c | 319 +++++++++++++++++++++++++++++ 5 files changed, 321 insertions(+), 322 deletions(-) delete mode 100644 arch/x86/kernel/early_printk_mrst.c create mode 100644 arch/x86/platform/mrst/early_printk_mrst.c (limited to 'arch/x86') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9e13763b6092..f60153d5de57 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -84,7 +84,6 @@ obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_APB_TIMER) += apb_timer.o diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c index 4572f25f9325..cd28a350f7f9 100644 --- a/arch/x86/kernel/early_printk.c +++ b/arch/x86/kernel/early_printk.c @@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "xen", 3)) early_console_register(&xenboot_console, keep); #endif -#ifdef CONFIG_X86_MRST_EARLY_PRINTK +#ifdef CONFIG_EARLY_PRINTK_MRST if (!strncmp(buf, "mrst", 4)) { mrst_early_console_init(); early_console_register(&early_mrst_console, keep); @@ -250,7 +250,6 @@ static int __init setup_early_printk(char *buf) hsu_early_console_init(); early_console_register(&early_hsu_console, keep); } - #endif buf++; } diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c deleted file mode 100644 index 65df603622b2..000000000000 --- a/arch/x86/kernel/early_printk_mrst.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * early_printk_mrst.c - early consoles for Intel MID platforms - * - * Copyright (c) 2008-2010, Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -/* - * This file implements two early consoles named mrst and hsu. - * mrst is based on Maxim3110 spi-uart device, it exists in both - * Moorestown and Medfield platforms, while hsu is based on a High - * Speed UART device which only exists in the Medfield platform - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define MRST_SPI_TIMEOUT 0x200000 -#define MRST_REGBASE_SPI0 0xff128000 -#define MRST_REGBASE_SPI1 0xff128400 -#define MRST_CLK_SPI0_REG 0xff11d86c - -/* Bit fields in CTRLR0 */ -#define SPI_DFS_OFFSET 0 - -#define SPI_FRF_OFFSET 4 -#define SPI_FRF_SPI 0x0 -#define SPI_FRF_SSP 0x1 -#define SPI_FRF_MICROWIRE 0x2 -#define SPI_FRF_RESV 0x3 - -#define SPI_MODE_OFFSET 6 -#define SPI_SCPH_OFFSET 6 -#define SPI_SCOL_OFFSET 7 -#define SPI_TMOD_OFFSET 8 -#define SPI_TMOD_TR 0x0 /* xmit & recv */ -#define SPI_TMOD_TO 0x1 /* xmit only */ -#define SPI_TMOD_RO 0x2 /* recv only */ -#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ - -#define SPI_SLVOE_OFFSET 10 -#define SPI_SRL_OFFSET 11 -#define SPI_CFS_OFFSET 12 - -/* Bit fields in SR, 7 bits */ -#define SR_MASK 0x7f /* cover 7 bits */ -#define SR_BUSY (1 << 0) -#define SR_TF_NOT_FULL (1 << 1) -#define SR_TF_EMPT (1 << 2) -#define SR_RF_NOT_EMPT (1 << 3) -#define SR_RF_FULL (1 << 4) -#define SR_TX_ERR (1 << 5) -#define SR_DCOL (1 << 6) - -struct dw_spi_reg { - u32 ctrl0; - u32 ctrl1; - u32 ssienr; - u32 mwcr; - u32 ser; - u32 baudr; - u32 txfltr; - u32 rxfltr; - u32 txflr; - u32 rxflr; - u32 sr; - u32 imr; - u32 isr; - u32 risr; - u32 txoicr; - u32 rxoicr; - u32 rxuicr; - u32 msticr; - u32 icr; - u32 dmacr; - u32 dmatdlr; - u32 dmardlr; - u32 idr; - u32 version; - - /* Currently operates as 32 bits, though only the low 16 bits matter */ - u32 dr; -} __packed; - -#define dw_readl(dw, name) __raw_readl(&(dw)->name) -#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name) - -/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */ -static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0; - -static u32 *pclk_spi0; -/* Always contains an accessable address, start with 0 */ -static struct dw_spi_reg *pspi; - -static struct kmsg_dumper dw_dumper; -static int dumper_registered; - -static void dw_kmsg_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) -{ - int i; - - /* When run to this, we'd better re-init the HW */ - mrst_early_console_init(); - - for (i = 0; i < l1; i++) - early_mrst_console.write(&early_mrst_console, s1 + i, 1); - for (i = 0; i < l2; i++) - early_mrst_console.write(&early_mrst_console, s2 + i, 1); -} - -/* Set the ratio rate to 115200, 8n1, IRQ disabled */ -static void max3110_write_config(void) -{ - u16 config; - - config = 0xc001; - dw_writel(pspi, dr, config); -} - -/* Translate char to a eligible word and send to max3110 */ -static void max3110_write_data(char c) -{ - u16 data; - - data = 0x8000 | c; - dw_writel(pspi, dr, data); -} - -void mrst_early_console_init(void) -{ - u32 ctrlr0 = 0; - u32 spi0_cdiv; - u32 freq; /* Freqency info only need be searched once */ - - /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */ - pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - MRST_CLK_SPI0_REG); - spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9; - freq = 100000000 / (spi0_cdiv + 1); - - if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL) - mrst_spi_paddr = MRST_REGBASE_SPI1; - - pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - mrst_spi_paddr); - - /* Disable SPI controller */ - dw_writel(pspi, ssienr, 0); - - /* Set control param, 8 bits, transmit only mode */ - ctrlr0 = dw_readl(pspi, ctrl0); - - ctrlr0 &= 0xfcc0; - ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET) - | (SPI_TMOD_TO << SPI_TMOD_OFFSET); - dw_writel(pspi, ctrl0, ctrlr0); - - /* - * Change the spi0 clk to comply with 115200 bps, use 100000 to - * calculate the clk dividor to make the clock a little slower - * than real baud rate. - */ - dw_writel(pspi, baudr, freq/100000); - - /* Disable all INT for early phase */ - dw_writel(pspi, imr, 0x0); - - /* Set the cs to spi-uart */ - dw_writel(pspi, ser, 0x2); - - /* Enable the HW, the last step for HW init */ - dw_writel(pspi, ssienr, 0x1); - - /* Set the default configuration */ - max3110_write_config(); - - /* Register the kmsg dumper */ - if (!dumper_registered) { - dw_dumper.dump = dw_kmsg_dump; - kmsg_dump_register(&dw_dumper); - dumper_registered = 1; - } -} - -/* Slave select should be called in the read/write function */ -static void early_mrst_spi_putc(char c) -{ - unsigned int timeout; - u32 sr; - - timeout = MRST_SPI_TIMEOUT; - /* Early putc needs to make sure the TX FIFO is not full */ - while (--timeout) { - sr = dw_readl(pspi, sr); - if (!(sr & SR_TF_NOT_FULL)) - cpu_relax(); - else - break; - } - - if (!timeout) - pr_warning("MRST earlycon: timed out\n"); - else - max3110_write_data(c); -} - -/* Early SPI only uses polling mode */ -static void early_mrst_spi_write(struct console *con, const char *str, unsigned n) -{ - int i; - - for (i = 0; i < n && *str; i++) { - if (*str == '\n') - early_mrst_spi_putc('\r'); - early_mrst_spi_putc(*str); - str++; - } -} - -struct console early_mrst_console = { - .name = "earlymrst", - .write = early_mrst_spi_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Following is the early console based on Medfield HSU (High - * Speed UART) device. - */ -#define HSU_PORT2_PADDR 0xffa28180 - -static void __iomem *phsu; - -void hsu_early_console_init(void) -{ - u8 lcr; - - phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, - HSU_PORT2_PADDR); - - /* Disable FIFO */ - writeb(0x0, phsu + UART_FCR); - - /* Set to default 115200 bps, 8n1 */ - lcr = readb(phsu + UART_LCR); - writeb((0x80 | lcr), phsu + UART_LCR); - writeb(0x18, phsu + UART_DLL); - writeb(lcr, phsu + UART_LCR); - writel(0x3600, phsu + UART_MUL*4); - - writeb(0x8, phsu + UART_MCR); - writeb(0x7, phsu + UART_FCR); - writeb(0x3, phsu + UART_LCR); - - /* Clear IRQ status */ - readb(phsu + UART_LSR); - readb(phsu + UART_RX); - readb(phsu + UART_IIR); - readb(phsu + UART_MSR); - - /* Enable FIFO */ - writeb(0x7, phsu + UART_FCR); -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void early_hsu_putc(char ch) -{ - unsigned int timeout = 10000; /* 10ms */ - u8 status; - - while (--timeout) { - status = readb(phsu + UART_LSR); - if (status & BOTH_EMPTY) - break; - udelay(1); - } - - /* Only write the char when there was no timeout */ - if (timeout) - writeb(ch, phsu + UART_TX); -} - -static void early_hsu_write(struct console *con, const char *str, unsigned n) -{ - int i; - - for (i = 0; i < n && *str; i++) { - if (*str == '\n') - early_hsu_putc('\r'); - early_hsu_putc(*str); - str++; - } -} - -struct console early_hsu_console = { - .name = "earlyhsu", - .write = early_hsu_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile index 4d3e256780be..f61ccdd49341 100644 --- a/arch/x86/platform/mrst/Makefile +++ b/arch/x86/platform/mrst/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_X86_MRST) += mrst.o obj-$(CONFIG_X86_MRST) += vrtc.o +obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c new file mode 100644 index 000000000000..65df603622b2 --- /dev/null +++ b/arch/x86/platform/mrst/early_printk_mrst.c @@ -0,0 +1,319 @@ +/* + * early_printk_mrst.c - early consoles for Intel MID platforms + * + * Copyright (c) 2008-2010, Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +/* + * This file implements two early consoles named mrst and hsu. + * mrst is based on Maxim3110 spi-uart device, it exists in both + * Moorestown and Medfield platforms, while hsu is based on a High + * Speed UART device which only exists in the Medfield platform + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MRST_SPI_TIMEOUT 0x200000 +#define MRST_REGBASE_SPI0 0xff128000 +#define MRST_REGBASE_SPI1 0xff128400 +#define MRST_CLK_SPI0_REG 0xff11d86c + +/* Bit fields in CTRLR0 */ +#define SPI_DFS_OFFSET 0 + +#define SPI_FRF_OFFSET 4 +#define SPI_FRF_SPI 0x0 +#define SPI_FRF_SSP 0x1 +#define SPI_FRF_MICROWIRE 0x2 +#define SPI_FRF_RESV 0x3 + +#define SPI_MODE_OFFSET 6 +#define SPI_SCPH_OFFSET 6 +#define SPI_SCOL_OFFSET 7 +#define SPI_TMOD_OFFSET 8 +#define SPI_TMOD_TR 0x0 /* xmit & recv */ +#define SPI_TMOD_TO 0x1 /* xmit only */ +#define SPI_TMOD_RO 0x2 /* recv only */ +#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ + +#define SPI_SLVOE_OFFSET 10 +#define SPI_SRL_OFFSET 11 +#define SPI_CFS_OFFSET 12 + +/* Bit fields in SR, 7 bits */ +#define SR_MASK 0x7f /* cover 7 bits */ +#define SR_BUSY (1 << 0) +#define SR_TF_NOT_FULL (1 << 1) +#define SR_TF_EMPT (1 << 2) +#define SR_RF_NOT_EMPT (1 << 3) +#define SR_RF_FULL (1 << 4) +#define SR_TX_ERR (1 << 5) +#define SR_DCOL (1 << 6) + +struct dw_spi_reg { + u32 ctrl0; + u32 ctrl1; + u32 ssienr; + u32 mwcr; + u32 ser; + u32 baudr; + u32 txfltr; + u32 rxfltr; + u32 txflr; + u32 rxflr; + u32 sr; + u32 imr; + u32 isr; + u32 risr; + u32 txoicr; + u32 rxoicr; + u32 rxuicr; + u32 msticr; + u32 icr; + u32 dmacr; + u32 dmatdlr; + u32 dmardlr; + u32 idr; + u32 version; + + /* Currently operates as 32 bits, though only the low 16 bits matter */ + u32 dr; +} __packed; + +#define dw_readl(dw, name) __raw_readl(&(dw)->name) +#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name) + +/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */ +static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0; + +static u32 *pclk_spi0; +/* Always contains an accessable address, start with 0 */ +static struct dw_spi_reg *pspi; + +static struct kmsg_dumper dw_dumper; +static int dumper_registered; + +static void dw_kmsg_dump(struct kmsg_dumper *dumper, + enum kmsg_dump_reason reason, + const char *s1, unsigned long l1, + const char *s2, unsigned long l2) +{ + int i; + + /* When run to this, we'd better re-init the HW */ + mrst_early_console_init(); + + for (i = 0; i < l1; i++) + early_mrst_console.write(&early_mrst_console, s1 + i, 1); + for (i = 0; i < l2; i++) + early_mrst_console.write(&early_mrst_console, s2 + i, 1); +} + +/* Set the ratio rate to 115200, 8n1, IRQ disabled */ +static void max3110_write_config(void) +{ + u16 config; + + config = 0xc001; + dw_writel(pspi, dr, config); +} + +/* Translate char to a eligible word and send to max3110 */ +static void max3110_write_data(char c) +{ + u16 data; + + data = 0x8000 | c; + dw_writel(pspi, dr, data); +} + +void mrst_early_console_init(void) +{ + u32 ctrlr0 = 0; + u32 spi0_cdiv; + u32 freq; /* Freqency info only need be searched once */ + + /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */ + pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, + MRST_CLK_SPI0_REG); + spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9; + freq = 100000000 / (spi0_cdiv + 1); + + if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL) + mrst_spi_paddr = MRST_REGBASE_SPI1; + + pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, + mrst_spi_paddr); + + /* Disable SPI controller */ + dw_writel(pspi, ssienr, 0); + + /* Set control param, 8 bits, transmit only mode */ + ctrlr0 = dw_readl(pspi, ctrl0); + + ctrlr0 &= 0xfcc0; + ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET) + | (SPI_TMOD_TO << SPI_TMOD_OFFSET); + dw_writel(pspi, ctrl0, ctrlr0); + + /* + * Change the spi0 clk to comply with 115200 bps, use 100000 to + * calculate the clk dividor to make the clock a little slower + * than real baud rate. + */ + dw_writel(pspi, baudr, freq/100000); + + /* Disable all INT for early phase */ + dw_writel(pspi, imr, 0x0); + + /* Set the cs to spi-uart */ + dw_writel(pspi, ser, 0x2); + + /* Enable the HW, the last step for HW init */ + dw_writel(pspi, ssienr, 0x1); + + /* Set the default configuration */ + max3110_write_config(); + + /* Register the kmsg dumper */ + if (!dumper_registered) { + dw_dumper.dump = dw_kmsg_dump; + kmsg_dump_register(&dw_dumper); + dumper_registered = 1; + } +} + +/* Slave select should be called in the read/write function */ +static void early_mrst_spi_putc(char c) +{ + unsigned int timeout; + u32 sr; + + timeout = MRST_SPI_TIMEOUT; + /* Early putc needs to make sure the TX FIFO is not full */ + while (--timeout) { + sr = dw_readl(pspi, sr); + if (!(sr & SR_TF_NOT_FULL)) + cpu_relax(); + else + break; + } + + if (!timeout) + pr_warning("MRST earlycon: timed out\n"); + else + max3110_write_data(c); +} + +/* Early SPI only uses polling mode */ +static void early_mrst_spi_write(struct console *con, const char *str, unsigned n) +{ + int i; + + for (i = 0; i < n && *str; i++) { + if (*str == '\n') + early_mrst_spi_putc('\r'); + early_mrst_spi_putc(*str); + str++; + } +} + +struct console early_mrst_console = { + .name = "earlymrst", + .write = early_mrst_spi_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* + * Following is the early console based on Medfield HSU (High + * Speed UART) device. + */ +#define HSU_PORT2_PADDR 0xffa28180 + +static void __iomem *phsu; + +void hsu_early_console_init(void) +{ + u8 lcr; + + phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE, + HSU_PORT2_PADDR); + + /* Disable FIFO */ + writeb(0x0, phsu + UART_FCR); + + /* Set to default 115200 bps, 8n1 */ + lcr = readb(phsu + UART_LCR); + writeb((0x80 | lcr), phsu + UART_LCR); + writeb(0x18, phsu + UART_DLL); + writeb(lcr, phsu + UART_LCR); + writel(0x3600, phsu + UART_MUL*4); + + writeb(0x8, phsu + UART_MCR); + writeb(0x7, phsu + UART_FCR); + writeb(0x3, phsu + UART_LCR); + + /* Clear IRQ status */ + readb(phsu + UART_LSR); + readb(phsu + UART_RX); + readb(phsu + UART_IIR); + readb(phsu + UART_MSR); + + /* Enable FIFO */ + writeb(0x7, phsu + UART_FCR); +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void early_hsu_putc(char ch) +{ + unsigned int timeout = 10000; /* 10ms */ + u8 status; + + while (--timeout) { + status = readb(phsu + UART_LSR); + if (status & BOTH_EMPTY) + break; + udelay(1); + } + + /* Only write the char when there was no timeout */ + if (timeout) + writeb(ch, phsu + UART_TX); +} + +static void early_hsu_write(struct console *con, const char *str, unsigned n) +{ + int i; + + for (i = 0; i < n && *str; i++) { + if (*str == '\n') + early_hsu_putc('\r'); + early_hsu_putc(*str); + str++; + } +} + +struct console early_hsu_console = { + .name = "earlyhsu", + .write = early_hsu_write, + .flags = CON_PRINTBUFFER, + .index = -1, +}; -- cgit v1.2.3-59-g8ed1b