From 4bedea94545165364618d403d03b61d797acba0b Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 23 Jun 2005 22:01:12 -0700 Subject: [PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2 The attached patches provides part 2 of an architecture implementation for the Tensilica Xtensa CPU series. Signed-off-by: Chris Zankel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/xtensa/boot/Makefile | 37 + arch/xtensa/boot/boot-elf/Makefile | 52 + arch/xtensa/boot/boot-elf/boot.ld | 71 + arch/xtensa/boot/boot-elf/bootstrap.S | 37 + arch/xtensa/boot/boot-redboot/Makefile | 35 + arch/xtensa/boot/boot-redboot/boot.ld | 66 + arch/xtensa/boot/boot-redboot/bootstrap.S | 246 ++++ arch/xtensa/boot/include/zlib.h | 433 ++++++ arch/xtensa/boot/lib/Makefile | 6 + arch/xtensa/boot/lib/memcpy.S | 36 + arch/xtensa/boot/lib/zlib.c | 2150 +++++++++++++++++++++++++++++ arch/xtensa/boot/lib/zmem.c | 87 ++ arch/xtensa/boot/ramdisk/Makefile | 23 + 13 files changed, 3279 insertions(+) create mode 100644 arch/xtensa/boot/Makefile create mode 100644 arch/xtensa/boot/boot-elf/Makefile create mode 100644 arch/xtensa/boot/boot-elf/boot.ld create mode 100644 arch/xtensa/boot/boot-elf/bootstrap.S create mode 100644 arch/xtensa/boot/boot-redboot/Makefile create mode 100644 arch/xtensa/boot/boot-redboot/boot.ld create mode 100644 arch/xtensa/boot/boot-redboot/bootstrap.S create mode 100644 arch/xtensa/boot/include/zlib.h create mode 100644 arch/xtensa/boot/lib/Makefile create mode 100644 arch/xtensa/boot/lib/memcpy.S create mode 100644 arch/xtensa/boot/lib/zlib.c create mode 100644 arch/xtensa/boot/lib/zmem.c create mode 100644 arch/xtensa/boot/ramdisk/Makefile (limited to 'arch/xtensa') diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile new file mode 100644 index 000000000000..260f456ccf0b --- /dev/null +++ b/arch/xtensa/boot/Makefile @@ -0,0 +1,37 @@ +# +# arch/xtensa/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# + + +CFLAGS += -fno-builtin -Iarch/$(ARCH)/boot/include +HOSTFLAGS += -Iarch/$(ARCH)/boot/include + +BIG_ENDIAN := $(shell echo -e "\#ifdef __XTENSA_EL__\nint little;\n\#else\nint big;\n\#endif" | $(CC) -E -|grep -c big) + + +export CFLAGS +export AFLAGS +export BIG_ENDIAN + +# Subdirs for the boot loader(s) + +bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf +bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf + +subdir-y := lib/ + +subdir-y += boot-elf/ boot-redboot/ + +zImage zImage.initrd Image Image.initrd: $(bootdir-y) + +$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \ + $(addprefix $(obj)/,$(host-progs)) + $(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS) + + + diff --git a/arch/xtensa/boot/boot-elf/Makefile b/arch/xtensa/boot/boot-elf/Makefile new file mode 100644 index 000000000000..f6ef6a369667 --- /dev/null +++ b/arch/xtensa/boot/boot-elf/Makefile @@ -0,0 +1,52 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +GZIP = gzip +GZIP_FLAGS = -v9fc + +ifeq ($(BIG_ENDIAN),1) +OBJCOPY_ARGS := -O elf32-xtensa-be +else +OBJCOPY_ARGS := -O elf32-xtensa-le +endif + +export OBJCOPY_ARGS + +boot-y := bootstrap.o + +OBJS := $(addprefix $(obj)/,$(boot-y)) + +Image: vmlinux $(OBJS) + $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \ + vmlinux vmlinux.tmp + $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \ + --add-section image=vmlinux.tmp \ + --set-section-flags image=contents,alloc,load,load,data \ + $(OBJS) $@.tmp + $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \ + -T arch/$(ARCH)/boot/boot-elf/boot.ld \ + -o arch/$(ARCH)/boot/$@.elf $@.tmp + rm -f $@.tmp vmlinux.tmp + +Image.initrd: vmlinux $(OBJS) + $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \ + --add-section .initrd=arch/$(ARCH)/boot/ramdisk \ + --set-section-flags .initrd=contents,alloc,load,load,data \ + vmlinux vmlinux.tmp + $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \ + --add-section image=vmlinux.tmp \ + --set-section-flags image=contents,alloc,load,load,data \ + $(OBJS) $@.tmp + $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) \ + -T arch/$(ARCH)/boot/boot-elf/boot.ld \ + -o arch/$(ARCH)/boot/$@.elf $@.tmp + rm -f $@.tmp vmlinux.tmp + + +zImage: Image + +zImage.initrd: Image.initrd + diff --git a/arch/xtensa/boot/boot-elf/boot.ld b/arch/xtensa/boot/boot-elf/boot.ld new file mode 100644 index 000000000000..4ab06a0a7a6b --- /dev/null +++ b/arch/xtensa/boot/boot-elf/boot.ld @@ -0,0 +1,71 @@ +OUTPUT_ARCH(xtensa) + +SECTIONS +{ + .start 0xD0000000 : { *(.start) } + + .text 0xD0000000: + { + __reloc_start = . ; + _text_start = . ; + *(.literal .text.literal .text) + _text_end = . ; + } + + .rodata ALIGN(0x04): + { + *(.rodata) + *(.rodata1) + } + + .data ALIGN(0x04): + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.got.plt) + *(.got) + *(.dynamic) + } + + __reloc_end = . ; + + .initrd ALIGN(0x10) : + { + boot_initrd_start = . ; + *(.initrd) + boot_initrd_end = .; + } + + . = ALIGN(0x10); + __image_load = . ; + .image 0xd0001000: + { + _image_start = .; + *(image) + . = (. + 3) & ~ 3; + _image_end = . ; + } + + + .bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3): + { + __bss_start = .; + *(.sbss) + *(.scommon) + *(.dynbss) + *(.bss) + __bss_end = .; + } + _end = .; + _param_start = .; + + .ResetVector.text 0xfe000020 : + { + *(.ResetVector.text) + } + + + PROVIDE (end = .); +} diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S new file mode 100644 index 000000000000..7cba94abdab8 --- /dev/null +++ b/arch/xtensa/boot/boot-elf/bootstrap.S @@ -0,0 +1,37 @@ + +#include +#include + +#include +#include + + +/* ResetVector + */ + .section .ResetVector.text, "ax" + .global _ResetVector +_ResetVector: + _j reset + .align 4 +RomInitAddr: + .word 0xd0001000 +RomBootParam: + .word _bootparam +reset: + l32r a0, RomInitAddr + l32r a2, RomBootParam + movi a3, 0 + movi a4, 0 + jx a0 + + .align 4 + .section .bootstrap.data, "aw" + + .globl _bootparam +_bootparam: + .short BP_TAG_FIRST + .short 4 + .long BP_VERSION + .short BP_TAG_LAST + .short 0 + .long 0 diff --git a/arch/xtensa/boot/boot-redboot/Makefile b/arch/xtensa/boot/boot-redboot/Makefile new file mode 100644 index 000000000000..ca8a68bc8472 --- /dev/null +++ b/arch/xtensa/boot/boot-redboot/Makefile @@ -0,0 +1,35 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +GZIP = gzip +GZIP_FLAGS = -v9fc +ifeq ($(BIG_ENDIAN),1) +OBJCOPY_ARGS := -O elf32-xtensa-be +else +OBJCOPY_ARGS := -O elf32-xtensa-le +endif + +LD_ARGS = -T $(obj)/boot.ld + +boot-y := bootstrap.o + +OBJS := $(addprefix $(obj)/,$(boot-y)) +LIBS := arch/$(ARCH)/boot/lib/lib.a arch/$(ARCH)/lib/lib.a + +LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) + +zImage: vmlinux $(OBJS) $(LIBS) + $(OBJCOPY) --strip-all -R .comment -R .xt.insn -O binary \ + $(TOPDIR)/vmlinux vmlinux.tmp + gzip -vf9 vmlinux.tmp + $(OBJCOPY) $(OBJCOPY_ARGS) -R .comment \ + --add-section image=vmlinux.tmp.gz \ + --set-section-flags image=contents,alloc,load,load,data \ + $(OBJS) $@.tmp + $(LD) $(LD_ARGS) -o $@.elf $@.tmp $(LIBS) -L/xtensa-elf/lib $(LIBGCC) + $(OBJCOPY) -S -O binary $@.elf arch/$(ARCH)/boot/images/$@.redboot +# rm -f $@.tmp $@.elf vmlinux.tmp.gz + diff --git a/arch/xtensa/boot/boot-redboot/boot.ld b/arch/xtensa/boot/boot-redboot/boot.ld new file mode 100644 index 000000000000..65b726410e8a --- /dev/null +++ b/arch/xtensa/boot/boot-redboot/boot.ld @@ -0,0 +1,66 @@ +OUTPUT_ARCH(xtensa) + +SECTIONS +{ + .start 0xD0200000 : { *(.start) } + + .text : + { + __reloc_start = . ; + _text_start = . ; + *(.literal .text.literal .text) + _text_end = . ; + } + + .rodata ALIGN(0x04): + { + *(.rodata) + *(.rodata1) + } + + .data ALIGN(0x04): + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.got.plt) + *(.got) + *(.dynamic) + } + + __reloc_end = . ; + + .initrd ALIGN(0x10) : + { + boot_initrd_start = . ; + *(.initrd) + boot_initrd_end = .; + } + + . = ALIGN(0x10); + __image_load = . ; + .image 0xd0001000: AT(__image_load) + { + _image_start = .; + *(image) + . = (. + 3) & ~ 3; + _image_end = . ; + } + + + .bss ((LOADADDR(.image) + SIZEOF(.image) + 3) & ~ 3): + { + __bss_start = .; + *(.sbss) + *(.scommon) + *(.dynbss) + *(.bss) + __bss_end = .; + } + _end = .; + _param_start = .; + + + PROVIDE (end = .); +} diff --git a/arch/xtensa/boot/boot-redboot/bootstrap.S b/arch/xtensa/boot/boot-redboot/bootstrap.S new file mode 100644 index 000000000000..ee636b0da81c --- /dev/null +++ b/arch/xtensa/boot/boot-redboot/bootstrap.S @@ -0,0 +1,246 @@ + +#define _ASMLANGUAGE +#include +#include +#include + + /* + * RB-Data: RedBoot data/bss + * P: Boot-Parameters + * L: Kernel-Loader + * + * The Linux-Kernel image including the loader must be loaded + * to a position so that the kernel and the boot parameters + * can fit in the space before the load address. + * ______________________________________________________ + * |_RB-Data_|_P_|__________|_L_|___Linux-Kernel___|______| + * ^ + * ^ Load address + * ______________________________________________________ + * |___Linux-Kernel___|_P_|_L_|___________________________| + * + * The loader copies the parameter to the position that will + * be the end of the kernel and itself to the end of the + * parameter list. + */ + +/* Make sure we have enough space for the 'uncompressor' */ + +#define STACK_SIZE 32768 +#define HEAP_SIZE (131072*4) + + # a2: Parameter list + # a3: Size of parameter list + + .section .start, "ax" + + .globl __start + /* this must be the first byte of the loader! */ +__start: + entry sp, 32 # we do not intend to return + _call0 _start +__start_a0: + .align 4 + + .section .text, "ax" + .begin literal_prefix .text + + /* put literals in here! */ + + .globl _start +_start: + + /* 'reset' window registers */ + + movi a4, 1 + wsr a4, PS + rsync + + rsr a5, WINDOWBASE + ssl a5 + sll a4, a4 + wsr a4, WINDOWSTART + rsync + + movi a4, 0x00040000 + wsr a4, PS + rsync + + /* copy the loader to its address + * Note: The loader itself is a very small piece, so we assume we + * don't partially overlap. We also assume (even more important) + * that the kernel image is out of the way. Usually, when the + * load address of this image is not at an arbitrary address, + * but aligned to some 10K's we shouldn't overlap. + */ + + /* Note: The assembler cannot relax "addi a0, a0, ..." to an + l32r, so we load to a4 first. */ + + addi a4, a0, __start - __start_a0 + mov a0, a4 + movi a4, __start + movi a5, __reloc_end + + # a0: address where this code has been loaded + # a4: compiled address of __start + # a5: compiled end address + + mov.n a7, a0 + mov.n a8, a4 + +1: + l32i a10, a7, 0 + l32i a11, a7, 4 + s32i a10, a8, 0 + s32i a11, a8, 4 + l32i a10, a7, 8 + l32i a11, a7, 12 + s32i a10, a8, 8 + s32i a11, a8, 12 + addi a8, a8, 16 + addi a7, a7, 16 + blt a8, a5, 1b + + + /* We have to flush and invalidate the caches here before we jump. */ + +#if XCHAL_DCACHE_IS_WRITEBACK + dcache_writeback_all a5, a6 +#endif + icache_invalidate_all a5, a6 + + movi a11, _reloc + jx a11 + + .globl _reloc +_reloc: + + /* RedBoot is now at the end of the memory, so we don't have + * to copy the parameter list. Keep the code around; in case + * we need it again. */ +#if 0 + # a0: load address + # a2: start address of parameter list + # a3: length of parameter list + # a4: __start + + /* copy the parameter list out of the way */ + + movi a6, _param_start + add a3, a2, a3 +2: + l32i a8, a2, 0 + s32i a8, a6, 0 + addi a2, a2, 4 + addi a6, a6, 4 + blt a2, a3, 2b +#endif + + /* clear BSS section */ + movi a6, __bss_start + movi a7, __bss_end + movi.n a5, 0 +3: + s32i a5, a6, 0 + addi a6, a6, 4 + blt a6, a7, 3b + + movi a5, -16 + movi a1, _stack + STACK_SIZE + and a1, a1, a5 + + /* Uncompress the kernel */ + + # a0: load address + # a2: boot parameter + # a4: __start + + movi a3, __image_load + sub a4, a3, a4 + add a8, a0, a4 + + # a1 Stack + # a8(a4) Load address of the image + + movi a6, _image_start + movi a10, _image_end + movi a7, 0x1000000 + sub a11, a10, a6 + movi a9, complen + s32i a11, a9, 0 + + movi a0, 0 + + # a6 destination + # a7 maximum size of destination + # a8 source + # a9 ptr to length + + .extern gunzip + movi a4, gunzip + beqz a4, 1f + + callx4 a4 + + j 2f + + + # a6 destination start + # a7 maximum size of destination + # a8 source start + # a9 ptr to length + # a10 destination end + +1: + l32i a9, a8, 0 + l32i a11, a8, 4 + s32i a9, a6, 0 + s32i a11, a6, 4 + l32i a9, a8, 8 + l32i a11, a8, 12 + s32i a9, a6, 8 + s32i a11, a6, 12 + addi a6, a6, 16 + addi a8, a8, 16 + blt a6, a10, 1b + + + /* jump to the kernel */ +2: +#if XCHAL_DCACHE_IS_WRITEBACK + dcache_writeback_all a5, a6 +#endif + icache_invalidate_all a5, a6 + + movi a5, __start + movi a3, boot_initrd_start + movi a4, boot_initrd_end + sub a3, a3, a5 + sub a4, a4, a5 + add a3, a0, a3 + add a4, a0, a4 + + # a2 Boot parameter list + # a3 initrd_start (virtual load address) + # a4 initrd_end (virtual load address) + + movi a0, _image_start + jx a0 + + .align 16 + .data + .globl avail_ram +avail_ram: + .long _heap + .globl end_avail +end_avail: + .long _heap + HEAP_SIZE + + .comm _stack, STACK_SIZE + .comm _heap, HEAP_SIZE + + .globl end_avail + .comm complen, 4 + + .end literal_prefix diff --git a/arch/xtensa/boot/include/zlib.h b/arch/xtensa/boot/include/zlib.h new file mode 100644 index 000000000000..ea29b6237852 --- /dev/null +++ b/arch/xtensa/boot/include/zlib.h @@ -0,0 +1,433 @@ +/* + * BK Id: SCCS/s.zlib.h 1.8 05/18/01 15:17:23 cort + */ +/* + * This file is derived from zlib.h and zconf.h from the zlib-0.95 + * distribution by Jean-loup Gailly and Mark Adler, with some additions + * by Paul Mackerras to aid in implementing Deflate compression and + * decompression for PPP packets. + */ + +/* + * ==FILEVERSION 960122== + * + * This marker is used by the Linux installation script to determine + * whether an up-to-date version of this file is already installed. + */ + +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 0.95, Aug 16th, 1995. + + Copyright (C) 1995 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + gzip@prep.ai.mit.edu madler@alumni.caltech.edu + */ + +#ifndef _ZLIB_H +#define _ZLIB_H + +/* #include "zconf.h" */ /* included directly here */ + +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */ + +/* + The library does not install any signal handler. It is recommended to + add at least a handler for SIGSEGV when decompressing; the library checks + the consistency of the input data whenever possible but may go nuts + for some forms of corrupted input. + */ + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints + * at addresses which are not a multiple of their size. + * Under DOS, -DFAR=far or -DFAR=__far may be needed. + */ + +#ifndef STDC +# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus) +# define STDC +# endif +#endif + +#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */ +# include +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +#ifndef FAR +# define FAR +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + 1 << (windowBits+2) + 1 << (memLevel+9) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +typedef unsigned char Byte; /* 8 bits */ +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +typedef Byte FAR Bytef; +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +/* end of original zconf.h */ + +#define ZLIB_VERSION "0.95P" + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms may be added later and will have the same + stream interface. + + For compression the application must provide the output buffer and + may optionally provide the input buffer for optimization. For decompression, + the application must provide the input buffer and may optionally provide + the output buffer for optimization. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidp opaque; /* private data object passed to zalloc and zfree */ + + Byte data_type; /* best guess about the data type: ascii or binary */ + +} z_stream; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_FULL_FLUSH 2 +#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */ +#define Z_FINISH 4 +#define Z_PACKET_FLUSH 5 +/* See deflate() below for the usage of these constants */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +/* error codes for the compression/decompression functions */ + +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_DEFAULT_STRATEGY 0 + +#define Z_BINARY 0 +#define Z_ASCII 1 +#define Z_UNKNOWN 2 +/* Used to set the data_type field */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +extern char *zlib_version; +/* The application can compare zlib_version and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + */ + + /* basic functions */ + +extern int inflateInit OF((z_stream *strm)); +/* + Initializes the internal stream state for decompression. The fields + zalloc and zfree must be initialized before by the caller. If zalloc and + zfree are set to Z_NULL, inflateInit updates them to use default allocation + functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory. msg is set to null if there is no error message. + inflateInit does not perform any decompression: this will be done by + inflate(). +*/ + + +extern int inflate OF((z_stream *strm, int flush)); +/* + Performs one or both of the following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() always provides as much output as possible + (until there is no more input data or no more space in the output buffer). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). + + If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH, + inflate flushes as much output as possible to the output buffer. The + flushing behavior of inflate is not specified for values of the flush + parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the + current implementation actually flushes as much output as possible + anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data + has been consumed, it is expecting to see the length field of a stored + block; if not, it returns Z_DATA_ERROR. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster routine + may be used for the single inflate() call. + + inflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if the end of the + compressed data has been reached and all uncompressed output has been + produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if + the stream structure was inconsistent (for example if next_in or next_out + was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no + progress is possible or if there was not enough room in the output buffer + when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then + call inflateSync to look for a good compression block. */ + + +extern int inflateEnd OF((z_stream *strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* advanced functions */ + +extern int inflateInit2 OF((z_stream *strm, + int windowBits)); +/* + This is another version of inflateInit with more compression options. The + fields next_out, zalloc and zfree must be initialized before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library (the value 16 will be allowed soon). The + default value is 15 if inflateInit is used instead. If a compressed stream + with a larger window size is given as input, inflate() will return with + the error code Z_DATA_ERROR instead of trying to allocate a larger window. + + If next_out is not null, the library will use this buffer for the history + buffer; the buffer must either be large enough to hold the entire output + data, or have at least 1< + +.text +.align 4 +.global bcopy +.type bcopy,@function +bcopy: + movi a14, xthal_bcopy // a14 safe to use regardless of whether caller + // used call4 or call8 (can't have used call12) + jx a14 // let the Core HAL do the work + +.text +.align 4 +.global memcpy +.type memcpy,@function +memcpy: +.global memmove +.type memmove,@function +memmove: + movi a14, xthal_memcpy // a14 safe to use regardless of whether caller + // used call4 or call8 (can't have used call12) + jx a14 // let the Core HAL do the work + diff --git a/arch/xtensa/boot/lib/zlib.c b/arch/xtensa/boot/lib/zlib.c new file mode 100644 index 000000000000..e3859f631077 --- /dev/null +++ b/arch/xtensa/boot/lib/zlib.c @@ -0,0 +1,2150 @@ +/* + * BK Id: SCCS/s.zlib.c 1.8 05/18/01 15:17:24 cort + */ +/* + * This file is derived from various .h and .c files from the zlib-0.95 + * distribution by Jean-loup Gailly and Mark Adler, with some additions + * by Paul Mackerras to aid in implementing Deflate compression and + * decompression for PPP packets. See zlib.h for conditions of + * distribution and use. + * + * Changes that have been made include: + * - changed functions not used outside this file to "local" + * - added minCompression parameter to deflateInit2 + * - added Z_PACKET_FLUSH (see zlib.h for details) + * - added inflateIncomp + * + */ + +/*+++++*/ +/* zutil.h -- internal interface and configuration of the compression library + * Copyright (C) 1995 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */ + +#define _Z_UTIL_H + +#include "zlib.h" + +#ifndef local +# define local static +#endif +/* compile with -Dlocal if your debugger can't find static symbols */ + +#define FAR + +typedef unsigned char uch; +typedef uch FAR uchf; +typedef unsigned short ush; +typedef ush FAR ushf; +typedef unsigned long ulg; + +extern char *z_errmsg[]; /* indexed by 1-zlib_error */ + +#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err) +/* To be used only when the state is known to be valid */ + +#ifndef NULL +#define NULL ((void *) 0) +#endif + + /* common constants */ + +#define DEFLATED 8 + +#ifndef DEF_WBITS +# define DEF_WBITS MAX_WBITS +#endif +/* default windowBits for decompression. MAX_WBITS is for compression only */ + +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif +/* default memLevel */ + +#define STORED_BLOCK 0 +#define STATIC_TREES 1 +#define DYN_TREES 2 +/* The three kinds of block type */ + +#define MIN_MATCH 3 +#define MAX_MATCH 258 +/* The minimum and maximum match lengths */ + + /* functions */ + +#include +#define zmemcpy memcpy +#define zmemzero(dest, len) memset(dest, 0, len) + +/* Diagnostic functions */ +#ifdef DEBUG_ZLIB +# include +# ifndef verbose +# define verbose 0 +# endif +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + + +typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len)); + +/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */ +/* void zcfree OF((voidpf opaque, voidpf ptr)); */ + +#define ZALLOC(strm, items, size) \ + (*((strm)->zalloc))((strm)->opaque, (items), (size)) +#define ZFREE(strm, addr, size) \ + (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size)) +#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);} + +/* deflate.h -- internal compression state + * Copyright (C) 1995 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/*+++++*/ +/* infblock.h -- header to use infblock.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_blocks_state; +typedef struct inflate_blocks_state FAR inflate_blocks_statef; + +local inflate_blocks_statef * inflate_blocks_new OF(( + z_stream *z, + check_func c, /* check function */ + uInt w)); /* window size */ + +local int inflate_blocks OF(( + inflate_blocks_statef *, + z_stream *, + int)); /* initial return code */ + +local void inflate_blocks_reset OF(( + inflate_blocks_statef *, + z_stream *, + uLongf *)); /* check value on output */ + +local int inflate_blocks_free OF(( + inflate_blocks_statef *, + z_stream *, + uLongf *)); /* check value on output */ + +local int inflate_addhistory OF(( + inflate_blocks_statef *, + z_stream *)); + +local int inflate_packet_flush OF(( + inflate_blocks_statef *)); + +/*+++++*/ +/* inftrees.h -- header to use inftrees.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* Huffman code lookup table entry--this entry is four bytes for machines + that have 16-bit pointers (e.g. PC's in the small or medium model). */ + +typedef struct inflate_huft_s FAR inflate_huft; + +struct inflate_huft_s { + union { + struct { + Byte Exop; /* number of extra bits or operation */ + Byte Bits; /* number of bits in this code or subcode */ + } what; + uInt Nalloc; /* number of these allocated here */ + Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ + } word; /* 16-bit, 8 bytes for 32-bit machines) */ + union { + uInt Base; /* literal, length base, or distance base */ + inflate_huft *Next; /* pointer to next level of table */ + } more; +}; + +#ifdef DEBUG_ZLIB + local uInt inflate_hufts; +#endif + +local int inflate_trees_bits OF(( + uIntf *, /* 19 code lengths */ + uIntf *, /* bits tree desired/actual depth */ + inflate_huft * FAR *, /* bits tree result */ + z_stream *)); /* for zalloc, zfree functions */ + +local int inflate_trees_dynamic OF(( + uInt, /* number of literal/length codes */ + uInt, /* number of distance codes */ + uIntf *, /* that many (total) code lengths */ + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *, /* distance tree result */ + z_stream *)); /* for zalloc, zfree functions */ + +local int inflate_trees_fixed OF(( + uIntf *, /* literal desired/actual bit depth */ + uIntf *, /* distance desired/actual bit depth */ + inflate_huft * FAR *, /* literal/length tree result */ + inflate_huft * FAR *)); /* distance tree result */ + +local int inflate_trees_free OF(( + inflate_huft *, /* tables to free */ + z_stream *)); /* for zfree function */ + + +/*+++++*/ +/* infcodes.h -- header to use infcodes.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +struct inflate_codes_state; +typedef struct inflate_codes_state FAR inflate_codes_statef; + +local inflate_codes_statef *inflate_codes_new OF(( + uInt, uInt, + inflate_huft *, inflate_huft *, + z_stream *)); + +local int inflate_codes OF(( + inflate_blocks_statef *, + z_stream *, + int)); + +local void inflate_codes_free OF(( + inflate_codes_statef *, + z_stream *)); + + +/*+++++*/ +/* inflate.c -- zlib interface to inflate modules + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* inflate private state */ +struct internal_state { + + /* mode */ + enum { + METHOD, /* waiting for method byte */ + FLAG, /* waiting for flag byte */ + BLOCKS, /* decompressing blocks */ + CHECK4, /* four check bytes to go */ + CHECK3, /* three check bytes to go */ + CHECK2, /* two check bytes to go */ + CHECK1, /* one check byte to go */ + DONE, /* finished check, done */ + BAD} /* got an error--stay here */ + mode; /* current inflate mode */ + + /* mode dependent information */ + union { + uInt method; /* if FLAGS, method byte */ + struct { + uLong was; /* computed check value */ + uLong need; /* stream check value */ + } check; /* if CHECK, check values to compare */ + uInt marker; /* if BAD, inflateSync's marker bytes count */ + } sub; /* submode */ + + /* mode independent information */ + int nowrap; /* flag for no wrapper */ + uInt wbits; /* log2(window size) (8..15, defaults to 15) */ + inflate_blocks_statef + *blocks; /* current inflate_blocks state */ + +}; + + +int inflateReset(z) +z_stream *z; +{ + uLong c; + + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + z->total_in = z->total_out = 0; + z->msg = Z_NULL; + z->state->mode = z->state->nowrap ? BLOCKS : METHOD; + inflate_blocks_reset(z->state->blocks, z, &c); + Trace((stderr, "inflate: reset\n")); + return Z_OK; +} + + +int inflateEnd(z) +z_stream *z; +{ + uLong c; + + if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->blocks != Z_NULL) + inflate_blocks_free(z->state->blocks, z, &c); + ZFREE(z, z->state, sizeof(struct internal_state)); + z->state = Z_NULL; + Trace((stderr, "inflate: end\n")); + return Z_OK; +} + + +int inflateInit2(z, w) +z_stream *z; +int w; +{ + /* initialize state */ + if (z == Z_NULL) + return Z_STREAM_ERROR; +/* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */ +/* if (z->zfree == Z_NULL) z->zfree = zcfree; */ + if ((z->state = (struct internal_state FAR *) + ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL) + return Z_MEM_ERROR; + z->state->blocks = Z_NULL; + + /* handle undocumented nowrap option (no zlib header or check) */ + z->state->nowrap = 0; + if (w < 0) + { + w = - w; + z->state->nowrap = 1; + } + + /* set window size */ + if (w < 8 || w > 15) + { + inflateEnd(z); + return Z_STREAM_ERROR; + } + z->state->wbits = (uInt)w; + + /* create inflate_blocks state */ + if ((z->state->blocks = + inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w)) + == Z_NULL) + { + inflateEnd(z); + return Z_MEM_ERROR; + } + Trace((stderr, "inflate: allocated\n")); + + /* reset state */ + inflateReset(z); + return Z_OK; +} + + +int inflateInit(z) +z_stream *z; +{ + return inflateInit2(z, DEF_WBITS); +} + + +#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;} +#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) + +int inflate(z, f) +z_stream *z; +int f; +{ + int r; + uInt b; + + if (z == Z_NULL || z->next_in == Z_NULL) + return Z_STREAM_ERROR; + r = Z_BUF_ERROR; + while (1) switch (z->state->mode) + { + case METHOD: + NEEDBYTE + if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED) + { + z->state->mode = BAD; + z->msg = "unknown compression method"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if ((z->state->sub.method >> 4) + 8 > z->state->wbits) + { + z->state->mode = BAD; + z->msg = "invalid window size"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + z->state->mode = FLAG; + case FLAG: + NEEDBYTE + if ((b = NEXTBYTE) & 0x20) + { + z->state->mode = BAD; + z->msg = "invalid reserved bit"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + if (((z->state->sub.method << 8) + b) % 31) + { + z->state->mode = BAD; + z->msg = "incorrect header check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Trace((stderr, "inflate: zlib header ok\n")); + z->state->mode = BLOCKS; + case BLOCKS: + r = inflate_blocks(z->state->blocks, z, r); + if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0) + r = inflate_packet_flush(z->state->blocks); + if (r == Z_DATA_ERROR) + { + z->state->mode = BAD; + z->state->sub.marker = 0; /* can try inflateSync */ + break; + } + if (r != Z_STREAM_END) + return r; + r = Z_OK; + inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); + if (z->state->nowrap) + { + z->state->mode = DONE; + break; + } + z->state->mode = CHECK4; + case CHECK4: + NEEDBYTE + z->state->sub.check.need = (uLong)NEXTBYTE << 24; + z->state->mode = CHECK3; + case CHECK3: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 16; + z->state->mode = CHECK2; + case CHECK2: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE << 8; + z->state->mode = CHECK1; + case CHECK1: + NEEDBYTE + z->state->sub.check.need += (uLong)NEXTBYTE; + + if (z->state->sub.check.was != z->state->sub.check.need) + { + z->state->mode = BAD; + z->msg = "incorrect data check"; + z->state->sub.marker = 5; /* can't try inflateSync */ + break; + } + Trace((stderr, "inflate: zlib check ok\n")); + z->state->mode = DONE; + case DONE: + return Z_STREAM_END; + case BAD: + return Z_DATA_ERROR; + default: + return Z_STREAM_ERROR; + } + + empty: + if (f != Z_PACKET_FLUSH) + return r; + z->state->mode = BAD; + z->state->sub.marker = 0; /* can try inflateSync */ + return Z_DATA_ERROR; +} + +/* + * This subroutine adds the data at next_in/avail_in to the output history + * without performing any output. The output buffer must be "caught up"; + * i.e. no pending output (hence s->read equals s->write), and the state must + * be BLOCKS (i.e. we should be willing to see the start of a series of + * BLOCKS). On exit, the output will also be caught up, and the checksum + * will have been updated if need be. + */ + +int inflateIncomp(z) +z_stream *z; +{ + if (z->state->mode != BLOCKS) + return Z_DATA_ERROR; + return inflate_addhistory(z->state->blocks, z); +} + + +int inflateSync(z) +z_stream *z; +{ + uInt n; /* number of bytes to look at */ + Bytef *p; /* pointer to bytes */ + uInt m; /* number of marker bytes found in a row */ + uLong r, w; /* temporaries to save total_in and total_out */ + + /* set up */ + if (z == Z_NULL || z->state == Z_NULL) + return Z_STREAM_ERROR; + if (z->state->mode != BAD) + { + z->state->mode = BAD; + z->state->sub.marker = 0; + } + if ((n = z->avail_in) == 0) + return Z_BUF_ERROR; + p = z->next_in; + m = z->state->sub.marker; + + /* search */ + while (n && m < 4) + { + if (*p == (Byte)(m < 2 ? 0 : 0xff)) + m++; + else if (*p) + m = 0; + else + m = 4 - m; + p++, n--; + } + + /* restore */ + z->total_in += p - z->next_in; + z->next_in = p; + z->avail_in = n; + z->state->sub.marker = m; + + /* return no joy or set up to restart on a new block */ + if (m != 4) + return Z_DATA_ERROR; + r = z->total_in; w = z->total_out; + inflateReset(z); + z->total_in = r; z->total_out = w; + z->state->mode = BLOCKS; + return Z_OK; +} + +#undef NEEDBYTE +#undef NEXTBYTE + +/*+++++*/ +/* infutil.h -- types and macros common to blocks and codes + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +/* inflate blocks semi-private state */ +struct inflate_blocks_state { + + /* mode */ + enum { + TYPE, /* get type bits (3, including end bit) */ + LENS, /* get lengths for stored */ + STORED, /* processing stored block */ + TABLE, /* get table lengths */ + BTREE, /* get bit lengths tree for a dynamic block */ + DTREE, /* get length, distance trees for a dynamic block */ + CODES, /* processing fixed or dynamic block */ + DRY, /* output remaining window bytes */ + DONEB, /* finished last block, done */ + BADB} /* got a data error--stuck here */ + mode; /* current inflate_block mode */ + + /* mode dependent information */ + union { + uInt left; /* if STORED, bytes left to copy */ + struct { + uInt table; /* table lengths (14 bits) */ + uInt index; /* index into blens (or border) */ + uIntf *blens; /* bit lengths of codes */ + uInt bb; /* bit length tree depth */ + inflate_huft *tb; /* bit length decoding tree */ + int nblens; /* # elements allocated at blens */ + } trees; /* if DTREE, decoding info for trees */ + struct { + inflate_huft *tl, *td; /* trees to free */ + inflate_codes_statef + *codes; + } decode; /* if CODES, current state */ + } sub; /* submode */ + uInt last; /* true if this block is the last block */ + + /* mode independent information */ + uInt bitk; /* bits in bit buffer */ + uLong bitb; /* bit buffer */ + Bytef *window; /* sliding window */ + Bytef *end; /* one byte after sliding window */ + Bytef *read; /* window read pointer */ + Bytef *write; /* window write pointer */ + check_func checkfn; /* check function */ + uLong check; /* check on output */ + +}; + + +/* defines for inflate input/output */ +/* update pointers and return */ +#define UPDBITS {s->bitb=b;s->bitk=k;} +#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;} +#define UPDOUT {s->write=q;} +#define UPDATE {UPDBITS UPDIN UPDOUT} +#define LEAVE {UPDATE return inflate_flush(s,z,r);} +/* get bytes and bits */ +#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;} +#define NEEDBYTE {if(n)r=Z_OK;else LEAVE} +#define NEXTBYTE (n--,*p++) +#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<>=(j);k-=(j);} +/* output bytes */ +#define WAVAIL (qread?s->read-q-1:s->end-q) +#define LOADOUT {q=s->write;m=WAVAIL;} +#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}} +#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT} +#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;} +#define OUTBYTE(a) {*q++=(Byte)(a);m--;} +/* load local pointers */ +#define LOAD {LOADIN LOADOUT} + +/* + * The IBM 150 firmware munges the data right after _etext[]. This + * protects it. -- Cort + */ +local uInt protect_mask[] = {0, 0, 0, 0, 0, 0, 0, 0, 0 ,0 ,0 ,0}; +/* And'ing with mask[n] masks the lower n bits */ +local uInt inflate_mask[] = { + 0x0000, + 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff, + 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff +}; + +/* copy as much as possible from the sliding window to the output area */ +local int inflate_flush OF(( + inflate_blocks_statef *, + z_stream *, + int)); + +/*+++++*/ +/* inffast.h -- header to use inffast.c + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* WARNING: this file should *not* be used by applications. It is + part of the implementation of the compression library and is + subject to change. Applications should only use zlib.h. + */ + +local int inflate_fast OF(( + uInt, + uInt, + inflate_huft *, + inflate_huft *, + inflate_blocks_statef *, + z_stream *)); + + +/*+++++*/ +/* infblock.c -- interpret and process block types to last block + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* Table for deflate from PKZIP's appnote.txt. */ +local uInt border[] = { /* Order of the bit length code lengths */ + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + +/* + Notes beyond the 1.93a appnote.txt: + + 1. Distance pointers never point before the beginning of the output + stream. + 2. Distance pointers can point back across blocks, up to 32k away. + 3. There is an implied maximum of 7 bits for the bit length table and + 15 bits for the actual data. + 4. If only one code exists, then it is encoded using one bit. (Zero + would be more efficient, but perhaps a little confusing.) If two + codes exist, they are coded using one bit each (0 and 1). + 5. There is no way of sending zero distance codes--a dummy must be + sent if there are none. (History: a pre 2.0 version of PKZIP would + store blocks with no distance codes, but this was discovered to be + too harsh a criterion.) Valid only for 1.93a. 2.04c does allow + zero distance codes, which is sent as one code of zero bits in + length. + 6. There are up to 286 literal/length codes. Code 256 represents the + end-of-block. Note however that the static length tree defines + 288 codes just to fill out the Huffman codes. Codes 286 and 287 + cannot be used though, since there is no length base or extra bits + defined for them. Similarily, there are up to 30 distance codes. + However, static trees define 32 codes (all 5 bits) to fill out the + Huffman codes, but the last two had better not show up in the data. + 7. Unzip can check dynamic Huffman blocks for complete code sets. + The exception is that a single code would not be complete (see #4). + 8. The five bits following the block type is really the number of + literal codes sent minus 257. + 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits + (1+6+6). Therefore, to output three times the length, you output + three codes (1+1+1), whereas to output four times the same length, + you only need two codes (1+3). Hmm. + 10. In the tree reconstruction algorithm, Code = Code + Increment + only if BitLength(i) is not zero. (Pretty obvious.) + 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19) + 12. Note: length code 284 can represent 227-258, but length code 285 + really is 258. The last length deserves its own, short code + since it gets used a lot in very redundant files. The length + 258 is special since 258 - 3 (the min match length) is 255. + 13. The literal/length and distance code bit lengths are read as a + single stream of lengths. It is possible (and advantageous) for + a repeat code (16, 17, or 18) to go across the boundary between + the two sets of lengths. + */ + + +local void inflate_blocks_reset(s, z, c) +inflate_blocks_statef *s; +z_stream *z; +uLongf *c; +{ + if (s->checkfn != Z_NULL) + *c = s->check; + if (s->mode == BTREE || s->mode == DTREE) + ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); + if (s->mode == CODES) + { + inflate_codes_free(s->sub.decode.codes, z); + inflate_trees_free(s->sub.decode.td, z); + inflate_trees_free(s->sub.decode.tl, z); + } + s->mode = TYPE; + s->bitk = 0; + s->bitb = 0; + s->read = s->write = s->window; + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(0L, Z_NULL, 0); + Trace((stderr, "inflate: blocks reset\n")); +} + + +local inflate_blocks_statef *inflate_blocks_new(z, c, w) +z_stream *z; +check_func c; +uInt w; +{ + inflate_blocks_statef *s; + + if ((s = (inflate_blocks_statef *)ZALLOC + (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) + return s; + if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) + { + ZFREE(z, s, sizeof(struct inflate_blocks_state)); + return Z_NULL; + } + s->end = s->window + w; + s->checkfn = c; + s->mode = TYPE; + Trace((stderr, "inflate: blocks allocated\n")); + inflate_blocks_reset(s, z, &s->check); + return s; +} + + +local int inflate_blocks(s, z, r) +inflate_blocks_statef *s; +z_stream *z; +int r; +{ + uInt t; /* temporary storage */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input based on current state */ + while (1) switch (s->mode) + { + case TYPE: + NEEDBITS(3) + t = (uInt)b & 7; + s->last = t & 1; + switch (t >> 1) + { + case 0: /* stored */ + Trace((stderr, "inflate: stored block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + t = k & 7; /* go to byte boundary */ + DUMPBITS(t) + s->mode = LENS; /* get length of stored block */ + break; + case 1: /* fixed */ + Trace((stderr, "inflate: fixed codes block%s\n", + s->last ? " (last)" : "")); + { + uInt bl, bd; + inflate_huft *tl, *td; + + inflate_trees_fixed(&bl, &bd, &tl, &td); + s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); + if (s->sub.decode.codes == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.decode.tl = Z_NULL; /* don't try to free these */ + s->sub.decode.td = Z_NULL; + } + DUMPBITS(3) + s->mode = CODES; + break; + case 2: /* dynamic */ + Trace((stderr, "inflate: dynamic codes block%s\n", + s->last ? " (last)" : "")); + DUMPBITS(3) + s->mode = TABLE; + break; + case 3: /* illegal */ + DUMPBITS(3) + s->mode = BADB; + z->msg = "invalid block type"; + r = Z_DATA_ERROR; + LEAVE + } + break; + case LENS: + NEEDBITS(32) + if (((~b) >> 16) != (b & 0xffff)) + { + s->mode = BADB; + z->msg = "invalid stored block lengths"; + r = Z_DATA_ERROR; + LEAVE + } + s->sub.left = (uInt)b & 0xffff; + b = k = 0; /* dump bits */ + Tracev((stderr, "inflate: stored length %u\n", s->sub.left)); + s->mode = s->sub.left ? STORED : TYPE; + break; + case STORED: + if (n == 0) + LEAVE + NEEDOUT + t = s->sub.left; + if (t > n) t = n; + if (t > m) t = m; + zmemcpy(q, p, t); + p += t; n -= t; + q += t; m -= t; + if ((s->sub.left -= t) != 0) + break; + Tracev((stderr, "inflate: stored end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + s->mode = s->last ? DRY : TYPE; + break; + case TABLE: + NEEDBITS(14) + s->sub.trees.table = t = (uInt)b & 0x3fff; +#ifndef PKZIP_BUG_WORKAROUND + if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29) + { + s->mode = BADB; + z->msg = "too many length or distance symbols"; + r = Z_DATA_ERROR; + LEAVE + } +#endif + t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); + if (t < 19) + t = 19; + if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) + { + r = Z_MEM_ERROR; + LEAVE + } + s->sub.trees.nblens = t; + DUMPBITS(14) + s->sub.trees.index = 0; + Tracev((stderr, "inflate: table sizes ok\n")); + s->mode = BTREE; + case BTREE: + while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10)) + { + NEEDBITS(3) + s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7; + DUMPBITS(3) + } + while (s->sub.trees.index < 19) + s->sub.trees.blens[border[s->sub.trees.index++]] = 0; + s->sub.trees.bb = 7; + t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, + &s->sub.trees.tb, z); + if (t != Z_OK) + { + r = t; + if (r == Z_DATA_ERROR) + s->mode = BADB; + LEAVE + } + s->sub.trees.index = 0; + Tracev((stderr, "inflate: bits tree ok\n")); + s->mode = DTREE; + case DTREE: + while (t = s->sub.trees.table, + s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f)) + { + inflate_huft *h; + uInt i, j, c; + + t = s->sub.trees.bb; + NEEDBITS(t) + h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); + t = h->word.what.Bits; + c = h->more.Base; + if (c < 16) + { + DUMPBITS(t) + s->sub.trees.blens[s->sub.trees.index++] = c; + } + else /* c == 16..18 */ + { + i = c == 18 ? 7 : c - 14; + j = c == 18 ? 11 : 3; + NEEDBITS(t + i) + DUMPBITS(t) + j += (uInt)b & inflate_mask[i]; + DUMPBITS(i) + i = s->sub.trees.index; + t = s->sub.trees.table; + if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || + (c == 16 && i < 1)) + { + s->mode = BADB; + z->msg = "invalid bit length repeat"; + r = Z_DATA_ERROR; + LEAVE + } + c = c == 16 ? s->sub.trees.blens[i - 1] : 0; + do { + s->sub.trees.blens[i++] = c; + } while (--j); + s->sub.trees.index = i; + } + } + inflate_trees_free(s->sub.trees.tb, z); + s->sub.trees.tb = Z_NULL; + { + uInt bl, bd; + inflate_huft *tl, *td; + inflate_codes_statef *c; + + bl = 9; /* must be <= 9 for lookahead assumptions */ + bd = 6; /* must be <= 9 for lookahead assumptions */ + t = s->sub.trees.table; + t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), + s->sub.trees.blens, &bl, &bd, &tl, &td, z); + if (t != Z_OK) + { + if (t == (uInt)Z_DATA_ERROR) + s->mode = BADB; + r = t; + LEAVE + } + Tracev((stderr, "inflate: trees ok\n")); + if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) + { + inflate_trees_free(td, z); + inflate_trees_free(tl, z); + r = Z_MEM_ERROR; + LEAVE + } + ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt)); + s->sub.decode.codes = c; + s->sub.decode.tl = tl; + s->sub.decode.td = td; + } + s->mode = CODES; + case CODES: + UPDATE + if ((r = inflate_codes(s, z, r)) != Z_STREAM_END) + return inflate_flush(s, z, r); + r = Z_OK; + inflate_codes_free(s->sub.decode.codes, z); + inflate_trees_free(s->sub.decode.td, z); + inflate_trees_free(s->sub.decode.tl, z); + LOAD + Tracev((stderr, "inflate: codes end, %lu total out\n", + z->total_out + (q >= s->read ? q - s->read : + (s->end - s->read) + (q - s->window)))); + if (!s->last) + { + s->mode = TYPE; + break; + } + if (k > 7) /* return unused byte, if any */ + { + Assert(k < 16, "inflate_codes grabbed too many bytes") + k -= 8; + n++; + p--; /* can always return one */ + } + s->mode = DRY; + case DRY: + FLUSH + if (s->read != s->write) + LEAVE + s->mode = DONEB; + case DONEB: + r = Z_STREAM_END; + LEAVE + case BADB: + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +local int inflate_blocks_free(s, z, c) +inflate_blocks_statef *s; +z_stream *z; +uLongf *c; +{ + inflate_blocks_reset(s, z, c); + ZFREE(z, s->window, s->end - s->window); + ZFREE(z, s, sizeof(struct inflate_blocks_state)); + Trace((stderr, "inflate: blocks freed\n")); + return Z_OK; +} + +/* + * This subroutine adds the data at next_in/avail_in to the output history + * without performing any output. The output buffer must be "caught up"; + * i.e. no pending output (hence s->read equals s->write), and the state must + * be BLOCKS (i.e. we should be willing to see the start of a series of + * BLOCKS). On exit, the output will also be caught up, and the checksum + * will have been updated if need be. + */ +local int inflate_addhistory(s, z) +inflate_blocks_statef *s; +z_stream *z; +{ + uLong b; /* bit buffer */ /* NOT USED HERE */ + uInt k; /* bits in bit buffer */ /* NOT USED HERE */ + uInt t; /* temporary storage */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + + if (s->read != s->write) + return Z_STREAM_ERROR; + if (s->mode != TYPE) + return Z_DATA_ERROR; + + /* we're ready to rock */ + LOAD + /* while there is input ready, copy to output buffer, moving + * pointers as needed. + */ + while (n) { + t = n; /* how many to do */ + /* is there room until end of buffer? */ + if (t > m) t = m; + /* update check information */ + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(s->check, q, t); + zmemcpy(q, p, t); + q += t; + p += t; + n -= t; + z->total_out += t; + s->read = q; /* drag read pointer forward */ +/* WRAP */ /* expand WRAP macro by hand to handle s->read */ + if (q == s->end) { + s->read = q = s->window; + m = WAVAIL; + } + } + UPDATE + return Z_OK; +} + + +/* + * At the end of a Deflate-compressed PPP packet, we expect to have seen + * a `stored' block type value but not the (zero) length bytes. + */ +local int inflate_packet_flush(s) + inflate_blocks_statef *s; +{ + if (s->mode != LENS) + return Z_DATA_ERROR; + s->mode = TYPE; + return Z_OK; +} + + +/*+++++*/ +/* inftrees.c -- generate Huffman trees for efficient decoding + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + + +local int huft_build OF(( + uIntf *, /* code lengths in bits */ + uInt, /* number of codes */ + uInt, /* number of "simple" codes */ + uIntf *, /* list of base values for non-simple codes */ + uIntf *, /* list of extra bits for non-simple codes */ + inflate_huft * FAR*,/* result: starting table */ + uIntf *, /* maximum lookup bits (returns actual) */ + z_stream *)); /* for zalloc function */ + +local voidpf falloc OF(( + voidpf, /* opaque pointer (not used) */ + uInt, /* number of items */ + uInt)); /* size of item */ + +local void ffree OF(( + voidpf q, /* opaque pointer (not used) */ + voidpf p, /* what to free (not used) */ + uInt n)); /* number of bytes (not used) */ + +/* Tables for deflate from PKZIP's appnote.txt. */ +local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */ + 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, + 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; + /* actually lengths - 2; also see note #13 above about 258 */ +local uInt cplext[] = { /* Extra bits for literal codes 257..285 */ + 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */ +local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */ + 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, + 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, + 8193, 12289, 16385, 24577}; +local uInt cpdext[] = { /* Extra bits for distance codes */ + 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, + 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, + 12, 12, 13, 13}; + +/* + Huffman code decoding is performed using a multi-level table lookup. + The fastest way to decode is to simply build a lookup table whose + size is determined by the longest code. However, the time it takes + to build this table can also be a factor if the data being decoded + is not very long. The most common codes are necessarily the + shortest codes, so those codes dominate the decoding time, and hence + the speed. The idea is you can have a shorter table that decodes the + shorter, more probable codes, and then point to subsidiary tables for + the longer codes. The time it costs to decode the longer codes is + then traded against the time it takes to make longer tables. + + This results of this trade are in the variables lbits and dbits + below. lbits is the number of bits the first level table for literal/ + length codes can decode in one step, and dbits is the same thing for + the distance codes. Subsequent tables are also less than or equal to + those sizes. These values may be adjusted either when all of the + codes are shorter than that, in which case the longest code length in + bits is used, or when the shortest code is *longer* than the requested + table size, in which case the length of the shortest code in bits is + used. + + There are two different values for the two tables, since they code a + different number of possibilities each. The literal/length table + codes 286 possible values, or in a flat code, a little over eight + bits. The distance table codes 30 possible values, or a little less + than five bits, flat. The optimum values for speed end up being + about one bit more than those, so lbits is 8+1 and dbits is 5+1. + The optimum values may differ though from machine to machine, and + possibly even between compilers. Your mileage may vary. + */ + + +/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ +#define BMAX 15 /* maximum bit length of any code */ +#define N_MAX 288 /* maximum number of codes in any set */ + +#ifdef DEBUG_ZLIB + uInt inflate_hufts; +#endif + +local int huft_build(b, n, s, d, e, t, m, zs) +uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ +uInt n; /* number of codes (assumed <= N_MAX) */ +uInt s; /* number of simple-valued codes (0..s-1) */ +uIntf *d; /* list of base values for non-simple codes */ +uIntf *e; /* list of extra bits for non-simple codes */ +inflate_huft * FAR *t; /* result: starting table */ +uIntf *m; /* maximum lookup bits, returns actual */ +z_stream *zs; /* for zalloc function */ +/* Given a list of code lengths and a maximum table size, make a set of + tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR + if the given code set is incomplete (the tables are still built in this + case), Z_DATA_ERROR if the input is invalid (all zero length codes or an + over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ +{ + + uInt a; /* counter for codes of length k */ + uInt c[BMAX+1]; /* bit length count table */ + uInt f; /* i repeats in table every f entries */ + int g; /* maximum code length */ + int h; /* table level */ + register uInt i; /* counter, current code */ + register uInt j; /* counter */ + register int k; /* number of bits in current code */ + int l; /* bits per table (returned in m) */ + register uIntf *p; /* pointer into c[], b[], or v[] */ + inflate_huft *q; /* points to current table */ + struct inflate_huft_s r; /* table entry for structure assignment */ + inflate_huft *u[BMAX]; /* table stack */ + uInt v[N_MAX]; /* values in order of bit length */ + register int w; /* bits before this table == (l * h) */ + uInt x[BMAX+1]; /* bit offsets, then code stack */ + uIntf *xp; /* pointer into x */ + int y; /* number of dummy codes added */ + uInt z; /* number of entries in current table */ + + + /* Generate counts for each bit length */ + p = c; +#define C0 *p++ = 0; +#define C2 C0 C0 C0 C0 +#define C4 C2 C2 C2 C2 + C4 /* clear c[]--assume BMAX+1 is 16 */ + p = b; i = n; + do { + c[*p++]++; /* assume all entries <= BMAX */ + } while (--i); + if (c[0] == n) /* null input--all zero length codes */ + { + *t = (inflate_huft *)Z_NULL; + *m = 0; + return Z_OK; + } + + + /* Find minimum and maximum length, bound *m by those */ + l = *m; + for (j = 1; j <= BMAX; j++) + if (c[j]) + break; + k = j; /* minimum code length */ + if ((uInt)l < j) + l = j; + for (i = BMAX; i; i--) + if (c[i]) + break; + g = i; /* maximum code length */ + if ((uInt)l > i) + l = i; + *m = l; + + + /* Adjust last length count to fill out codes, if needed */ + for (y = 1 << j; j < i; j++, y <<= 1) + if ((y -= c[j]) < 0) + return Z_DATA_ERROR; + if ((y -= c[i]) < 0) + return Z_DATA_ERROR; + c[i] += y; + + + /* Generate starting offsets into the value table for each length */ + x[1] = j = 0; + p = c + 1; xp = x + 2; + while (--i) { /* note that i == g from above */ + *xp++ = (j += *p++); + } + + + /* Make a table of values in order of bit lengths */ + p = b; i = 0; + do { + if ((j = *p++) != 0) + v[x[j]++] = i; + } while (++i < n); + + + /* Generate the Huffman codes and for each, make the table entries */ + x[0] = i = 0; /* first Huffman code is zero */ + p = v; /* grab values in bit order */ + h = -1; /* no tables yet--level -1 */ + w = -l; /* bits decoded == (l * h) */ + u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */ + q = (inflate_huft *)Z_NULL; /* ditto */ + z = 0; /* ditto */ + + /* go through the bit lengths (k already is bits in shortest code) */ + for (; k <= g; k++) + { + a = c[k]; + while (a--) + { + /* here i is the Huffman code of length k bits for value *p */ + /* make tables up to required level */ + while (k > w + l) + { + h++; + w += l; /* previous table always l bits */ + + /* compute minimum size table less than or equal to l bits */ + z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */ + if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */ + { /* too few codes for k-w bit table */ + f -= a + 1; /* deduct codes from patterns left */ + xp = c + k; + if (j < z) + while (++j < z) /* try smaller tables up to z bits */ + { + if ((f <<= 1) <= *++xp) + break; /* enough codes to use up j bits */ + f -= *xp; /* else deduct codes from patterns */ + } + } + z = 1 << j; /* table entries for j-bit table */ + + /* allocate and link in new table */ + if ((q = (inflate_huft *)ZALLOC + (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) + { + if (h) + inflate_trees_free(u[0], zs); + return Z_MEM_ERROR; /* not enough memory */ + } + q->word.Nalloc = z + 1; +#ifdef DEBUG_ZLIB + inflate_hufts += z + 1; +#endif + *t = q + 1; /* link to list for huft_free() */ + *(t = &(q->next)) = Z_NULL; + u[h] = ++q; /* table starts after link */ + + /* connect to last table, if there is one */ + if (h) + { + x[h] = i; /* save pattern for backing up */ + r.bits = (Byte)l; /* bits to dump before this table */ + r.exop = (Byte)j; /* bits in this table */ + r.next = q; /* pointer to this table */ + j = i >> (w - l); /* (get around Turbo C bug) */ + u[h-1][j] = r; /* connect to last table */ + } + } + + /* set up table entry in r */ + r.bits = (Byte)(k - w); + if (p >= v + n) + r.exop = 128 + 64; /* out of values--invalid code */ + else if (*p < s) + { + r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */ + r.base = *p++; /* simple code is just the value */ + } + else + { + r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */ + r.base = d[*p++ - s]; + } + + /* fill code-like entries with r */ + f = 1 << (k - w); + for (j = i >> w; j < z; j += f) + q[j] = r; + + /* backwards increment the k-bit code i */ + for (j = 1 << (k - 1); i & j; j >>= 1) + i ^= j; + i ^= j; + + /* backup over finished tables */ + while ((i & ((1 << w) - 1)) != x[h]) + { + h--; /* don't need to update q */ + w -= l; + } + } + } + + + /* Return Z_BUF_ERROR if we were given an incomplete table */ + return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK; +} + + +local int inflate_trees_bits(c, bb, tb, z) +uIntf *c; /* 19 code lengths */ +uIntf *bb; /* bits tree desired/actual depth */ +inflate_huft * FAR *tb; /* bits tree result */ +z_stream *z; /* for zfree function */ +{ + int r; + + r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); + if (r == Z_DATA_ERROR) + z->msg = "oversubscribed dynamic bit lengths tree"; + else if (r == Z_BUF_ERROR) + { + inflate_trees_free(*tb, z); + z->msg = "incomplete dynamic bit lengths tree"; + r = Z_DATA_ERROR; + } + return r; +} + + +local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) +uInt nl; /* number of literal/length codes */ +uInt nd; /* number of distance codes */ +uIntf *c; /* that many (total) code lengths */ +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +z_stream *z; /* for zfree function */ +{ + int r; + + /* build literal/length tree */ + if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK) + { + if (r == Z_DATA_ERROR) + z->msg = "oversubscribed literal/length tree"; + else if (r == Z_BUF_ERROR) + { + inflate_trees_free(*tl, z); + z->msg = "incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + return r; + } + + /* build distance tree */ + if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK) + { + if (r == Z_DATA_ERROR) + z->msg = "oversubscribed literal/length tree"; + else if (r == Z_BUF_ERROR) { +#ifdef PKZIP_BUG_WORKAROUND + r = Z_OK; + } +#else + inflate_trees_free(*td, z); + z->msg = "incomplete literal/length tree"; + r = Z_DATA_ERROR; + } + inflate_trees_free(*tl, z); + return r; +#endif + } + + /* done */ + return Z_OK; +} + + +/* build fixed tables only once--keep them here */ +local int fixed_lock = 0; +local int fixed_built = 0; +#define FIXEDH 530 /* number of hufts used by fixed tables */ +local uInt fixed_left = FIXEDH; +local inflate_huft fixed_mem[FIXEDH]; +local uInt fixed_bl; +local uInt fixed_bd; +local inflate_huft *fixed_tl; +local inflate_huft *fixed_td; + + +local voidpf falloc(q, n, s) +voidpf q; /* opaque pointer (not used) */ +uInt n; /* number of items */ +uInt s; /* size of item */ +{ + Assert(s == sizeof(inflate_huft) && n <= fixed_left, + "inflate_trees falloc overflow"); + if (q) s++; /* to make some compilers happy */ + fixed_left -= n; + return (voidpf)(fixed_mem + fixed_left); +} + + +local void ffree(q, p, n) +voidpf q; +voidpf p; +uInt n; +{ + Assert(0, "inflate_trees ffree called!"); + if (q) q = p; /* to make some compilers happy */ +} + + +local int inflate_trees_fixed(bl, bd, tl, td) +uIntf *bl; /* literal desired/actual bit depth */ +uIntf *bd; /* distance desired/actual bit depth */ +inflate_huft * FAR *tl; /* literal/length tree result */ +inflate_huft * FAR *td; /* distance tree result */ +{ + /* build fixed tables if not built already--lock out other instances */ + while (++fixed_lock > 1) + fixed_lock--; + if (!fixed_built) + { + int k; /* temporary variable */ + unsigned c[288]; /* length list for huft_build */ + z_stream z; /* for falloc function */ + + /* set up fake z_stream for memory routines */ + z.zalloc = falloc; + z.zfree = ffree; + z.opaque = Z_NULL; + + /* literal table */ + for (k = 0; k < 144; k++) + c[k] = 8; + for (; k < 256; k++) + c[k] = 9; + for (; k < 280; k++) + c[k] = 7; + for (; k < 288; k++) + c[k] = 8; + fixed_bl = 7; + huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); + + /* distance table */ + for (k = 0; k < 30; k++) + c[k] = 5; + fixed_bd = 5; + huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); + + /* done */ + fixed_built = 1; + } + fixed_lock--; + *bl = fixed_bl; + *bd = fixed_bd; + *tl = fixed_tl; + *td = fixed_td; + return Z_OK; +} + + +local int inflate_trees_free(t, z) +inflate_huft *t; /* table to free */ +z_stream *z; /* for zfree function */ +/* Free the malloc'ed tables built by huft_build(), which makes a linked + list of the tables it made, with the links in a dummy first entry of + each table. */ +{ + register inflate_huft *p, *q; + + /* Go through linked list, freeing from the malloced (t[-1]) address. */ + p = t; + while (p != Z_NULL) + { + q = (--p)->next; + ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft)); + p = q; + } + return Z_OK; +} + +/*+++++*/ +/* infcodes.c -- process literals and length/distance pairs + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + +/* inflate codes private state */ +struct inflate_codes_state { + + /* mode */ + enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + START, /* x: set up for LEN */ + LEN, /* i: get length/literal/eob next */ + LENEXT, /* i: getting length extra (have base) */ + DIST, /* i: get distance next */ + DISTEXT, /* i: getting distance extra */ + COPY, /* o: copying bytes in window, waiting for space */ + LIT, /* o: got literal, waiting for output space */ + WASH, /* o: got eob, possibly still output waiting */ + END, /* x: got eob and all data flushed */ + BADCODE} /* x: got error */ + mode; /* current inflate_codes mode */ + + /* mode dependent information */ + uInt len; + union { + struct { + inflate_huft *tree; /* pointer into tree */ + uInt need; /* bits needed */ + } code; /* if LEN or DIST, where in tree */ + uInt lit; /* if LIT, literal */ + struct { + uInt get; /* bits to get for extra */ + uInt dist; /* distance back to copy from */ + } copy; /* if EXT or COPY, where and how much */ + } sub; /* submode */ + + /* mode independent information */ + Byte lbits; /* ltree bits decoded per branch */ + Byte dbits; /* dtree bits decoder per branch */ + inflate_huft *ltree; /* literal/length/eob tree */ + inflate_huft *dtree; /* distance tree */ + +}; + + +local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z) +uInt bl, bd; +inflate_huft *tl, *td; +z_stream *z; +{ + inflate_codes_statef *c; + + if ((c = (inflate_codes_statef *) + ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL) + { + c->mode = START; + c->lbits = (Byte)bl; + c->dbits = (Byte)bd; + c->ltree = tl; + c->dtree = td; + Tracev((stderr, "inflate: codes new\n")); + } + return c; +} + + +local int inflate_codes(s, z, r) +inflate_blocks_statef *s; +z_stream *z; +int r; +{ + uInt j; /* temporary storage */ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + Bytef *f; /* pointer to copy strings from */ + inflate_codes_statef *c = s->sub.decode.codes; /* codes state */ + + /* copy input/output information to locals (UPDATE macro restores) */ + LOAD + + /* process input and output based on current state */ + while (1) switch (c->mode) + { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ + case START: /* x: set up for LEN */ +#ifndef SLOW + if (m >= 258 && n >= 10) + { + UPDATE + r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z); + LOAD + if (r != Z_OK) + { + c->mode = r == Z_STREAM_END ? WASH : BADCODE; + break; + } + } +#endif /* !SLOW */ + c->sub.code.need = c->lbits; + c->sub.code.tree = c->ltree; + c->mode = LEN; + case LEN: /* i: get length/literal/eob next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e == 0) /* literal */ + { + c->sub.lit = t->base; + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", t->base)); + c->mode = LIT; + break; + } + if (e & 16) /* length */ + { + c->sub.copy.get = e & 15; + c->len = t->base; + c->mode = LENEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t->next; + break; + } + if (e & 32) /* end of block */ + { + Tracevv((stderr, "inflate: end of block\n")); + c->mode = WASH; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = "invalid literal/length code"; + r = Z_DATA_ERROR; + LEAVE + case LENEXT: /* i: getting length extra (have base) */ + j = c->sub.copy.get; + NEEDBITS(j) + c->len += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + c->sub.code.need = c->dbits; + c->sub.code.tree = c->dtree; + Tracevv((stderr, "inflate: length %u\n", c->len)); + c->mode = DIST; + case DIST: /* i: get distance next */ + j = c->sub.code.need; + NEEDBITS(j) + t = c->sub.code.tree + ((uInt)b & inflate_mask[j]); + DUMPBITS(t->bits) + e = (uInt)(t->exop); + if (e & 16) /* distance */ + { + c->sub.copy.get = e & 15; + c->sub.copy.dist = t->base; + c->mode = DISTEXT; + break; + } + if ((e & 64) == 0) /* next table */ + { + c->sub.code.need = e; + c->sub.code.tree = t->next; + break; + } + c->mode = BADCODE; /* invalid code */ + z->msg = "invalid distance code"; + r = Z_DATA_ERROR; + LEAVE + case DISTEXT: /* i: getting distance extra */ + j = c->sub.copy.get; + NEEDBITS(j) + c->sub.copy.dist += (uInt)b & inflate_mask[j]; + DUMPBITS(j) + Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist)); + c->mode = COPY; + case COPY: /* o: copying bytes in window, waiting for space */ +#ifndef __TURBOC__ /* Turbo C bug for following expression */ + f = (uInt)(q - s->window) < c->sub.copy.dist ? + s->end - (c->sub.copy.dist - (q - s->window)) : + q - c->sub.copy.dist; +#else + f = q - c->sub.copy.dist; + if ((uInt)(q - s->window) < c->sub.copy.dist) + f = s->end - (c->sub.copy.dist - (q - s->window)); +#endif + while (c->len) + { + NEEDOUT + OUTBYTE(*f++) + if (f == s->end) + f = s->window; + c->len--; + } + c->mode = START; + break; + case LIT: /* o: got literal, waiting for output space */ + NEEDOUT + OUTBYTE(c->sub.lit) + c->mode = START; + break; + case WASH: /* o: got eob, possibly more output */ + FLUSH + if (s->read != s->write) + LEAVE + c->mode = END; + case END: + r = Z_STREAM_END; + LEAVE + case BADCODE: /* x: got error */ + r = Z_DATA_ERROR; + LEAVE + default: + r = Z_STREAM_ERROR; + LEAVE + } +} + + +local void inflate_codes_free(c, z) +inflate_codes_statef *c; +z_stream *z; +{ + ZFREE(z, c, sizeof(struct inflate_codes_state)); + Tracev((stderr, "inflate: codes free\n")); +} + +/*+++++*/ +/* inflate_util.c -- data and routines common to blocks and codes + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* copy as much as possible from the sliding window to the output area */ +local int inflate_flush(s, z, r) +inflate_blocks_statef *s; +z_stream *z; +int r; +{ + uInt n; + Bytef *p, *q; + + /* local copies of source and destination pointers */ + p = z->next_out; + q = s->read; + + /* compute number of bytes to copy as far as end of window */ + n = (uInt)((q <= s->write ? s->write : s->end) - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(s->check, q, n); + + /* copy as far as end of window */ + zmemcpy(p, q, n); + p += n; + q += n; + + /* see if more to copy at beginning of window */ + if (q == s->end) + { + /* wrap pointers */ + q = s->window; + if (s->write == s->end) + s->write = s->window; + + /* compute bytes to copy */ + n = (uInt)(s->write - q); + if (n > z->avail_out) n = z->avail_out; + if (n && r == Z_BUF_ERROR) r = Z_OK; + + /* update counters */ + z->avail_out -= n; + z->total_out += n; + + /* update check information */ + if (s->checkfn != Z_NULL) + s->check = (*s->checkfn)(s->check, q, n); + + /* copy */ + zmemcpy(p, q, n); + p += n; + q += n; + } + + /* update pointers */ + z->next_out = p; + s->read = q; + + /* done */ + return r; +} + + +/*+++++*/ +/* inffast.c -- process literals and length/distance pairs fast + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* simplify the use of the inflate_huft type with some defines */ +#define base more.Base +#define next more.Next +#define exop word.what.Exop +#define bits word.what.Bits + +/* macros for bit input with no checking and for returning unused bytes */ +#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<>3);p-=c;k&=7;} + +/* Called with number of bytes left to write in window at least 258 + (the maximum string length) and number of input bytes available + at least ten. The ten bytes are six bytes for the longest length/ + distance pair plus four bytes for overloading the bit buffer. */ + +local int inflate_fast(bl, bd, tl, td, s, z) +uInt bl, bd; +inflate_huft *tl, *td; +inflate_blocks_statef *s; +z_stream *z; +{ + inflate_huft *t; /* temporary pointer */ + uInt e; /* extra bits or operation */ + uLong b; /* bit buffer */ + uInt k; /* bits in bit buffer */ + Bytef *p; /* input data pointer */ + uInt n; /* bytes available there */ + Bytef *q; /* output window write pointer */ + uInt m; /* bytes to end of window or read pointer */ + uInt ml; /* mask for literal/length tree */ + uInt md; /* mask for distance tree */ + uInt c; /* bytes to copy */ + uInt d; /* distance back to copy from */ + Bytef *r; /* copy source pointer */ + + /* load input, output, bit values */ + LOAD + + /* initialize masks */ + ml = inflate_mask[bl]; + md = inflate_mask[bd]; + + /* do until not enough input or output space for fast loop */ + do { /* assume called with m >= 258 && n >= 10 */ + /* get literal/length code */ + GRABBITS(20) /* max bits for literal/length code */ + if ((e = (t = tl + ((uInt)b & ml))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + continue; + } + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits for length */ + e &= 15; + c = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * length %u\n", c)); + + /* decode distance base of block to copy */ + GRABBITS(15); /* max bits for distance code */ + e = (t = td + ((uInt)b & md))->exop; + do { + DUMPBITS(t->bits) + if (e & 16) + { + /* get extra bits to add to distance base */ + e &= 15; + GRABBITS(e) /* get extra bits (up to 13) */ + d = t->base + ((uInt)b & inflate_mask[e]); + DUMPBITS(e) + Tracevv((stderr, "inflate: * distance %u\n", d)); + + /* do the copy */ + m -= c; + if ((uInt)(q - s->window) >= d) /* offset before dest */ + { /* just copy */ + r = q - d; + *q++ = *r++; c--; /* minimum count is three, */ + *q++ = *r++; c--; /* so unroll loop a little */ + } + else /* else offset after destination */ + { + e = d - (q - s->window); /* bytes from offset to end */ + r = s->end - e; /* pointer to offset */ + if (c > e) /* if source crosses, */ + { + c -= e; /* copy to end of window */ + do { + *q++ = *r++; + } while (--e); + r = s->window; /* copy rest from start of window */ + } + } + do { /* copy all or what's left */ + *q++ = *r++; + } while (--c); + break; + } + else if ((e & 64) == 0) + e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; + else + { + z->msg = "invalid distance code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + break; + } + if ((e & 64) == 0) + { + if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) + { + DUMPBITS(t->bits) + Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? + "inflate: * literal '%c'\n" : + "inflate: * literal 0x%02x\n", t->base)); + *q++ = (Byte)t->base; + m--; + break; + } + } + else if (e & 32) + { + Tracevv((stderr, "inflate: * end of block\n")); + UNGRAB + UPDATE + return Z_STREAM_END; + } + else + { + z->msg = "invalid literal/length code"; + UNGRAB + UPDATE + return Z_DATA_ERROR; + } + } while (1); + } while (m >= 258 && n >= 10); + + /* not enough input or output--restore pointers and return */ + UNGRAB + UPDATE + return Z_OK; +} + + +/*+++++*/ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */ + +char *zlib_version = ZLIB_VERSION; + +char *z_errmsg[] = { +"stream end", /* Z_STREAM_END 1 */ +"", /* Z_OK 0 */ +"file error", /* Z_ERRNO (-1) */ +"stream error", /* Z_STREAM_ERROR (-2) */ +"data error", /* Z_DATA_ERROR (-3) */ +"insufficient memory", /* Z_MEM_ERROR (-4) */ +"buffer error", /* Z_BUF_ERROR (-5) */ +""}; + + +/*+++++*/ +/* adler32.c -- compute the Adler-32 checksum of a data stream + * Copyright (C) 1995 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */ + +#define BASE 65521L /* largest prime smaller than 65536 */ +#define NMAX 5552 +/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ + +#define DO1(buf) {s1 += *buf++; s2 += s1;} +#define DO2(buf) DO1(buf); DO1(buf); +#define DO4(buf) DO2(buf); DO2(buf); +#define DO8(buf) DO4(buf); DO4(buf); +#define DO16(buf) DO8(buf); DO8(buf); + +/* ========================================================================= */ +uLong adler32(adler, buf, len) + uLong adler; + Bytef *buf; + uInt len; +{ + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int k; + + if (buf == Z_NULL) return 1L; + + while (len > 0) { + k = len < NMAX ? len : NMAX; + len -= k; + while (k >= 16) { + DO16(buf); + k -= 16; + } + if (k != 0) do { + DO1(buf); + } while (--k); + s1 %= BASE; + s2 %= BASE; + } + return (s2 << 16) | s1; +} diff --git a/arch/xtensa/boot/lib/zmem.c b/arch/xtensa/boot/lib/zmem.c new file mode 100644 index 000000000000..7848f126d67d --- /dev/null +++ b/arch/xtensa/boot/lib/zmem.c @@ -0,0 +1,87 @@ +#include "zlib.h" + +/* bits taken from ppc */ + +extern void *avail_ram, *end_avail; + +void exit (void) +{ + for (;;); +} + +void *zalloc(void *x, unsigned items, unsigned size) +{ + void *p = avail_ram; + + size *= items; + size = (size + 7) & -8; + avail_ram += size; + if (avail_ram > end_avail) { + //puts("oops... out of memory\n"); + //pause(); + exit (); + } + return p; +} + +void zfree(void *x, void *addr, unsigned nb) +{ +} + + +#define HEAD_CRC 2 +#define EXTRA_FIELD 4 +#define ORIG_NAME 8 +#define COMMENT 0x10 +#define RESERVED 0xe0 + +#define DEFLATED 8 + +void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp) +{ + z_stream s; + int r, i, flags; + + /* skip header */ + + i = 10; + flags = src[3]; + if (src[2] != DEFLATED || (flags & RESERVED) != 0) { + //puts("bad gzipped data\n"); + exit(); + } + if ((flags & EXTRA_FIELD) != 0) + i = 12 + src[10] + (src[11] << 8); + if ((flags & ORIG_NAME) != 0) + while (src[i++] != 0) + ; + if ((flags & COMMENT) != 0) + while (src[i++] != 0) + ; + if ((flags & HEAD_CRC) != 0) + i += 2; + if (i >= *lenp) { + //puts("gunzip: ran out of data in header\n"); + exit(); + } + + s.zalloc = zalloc; + s.zfree = zfree; + r = inflateInit2(&s, -MAX_WBITS); + if (r != Z_OK) { + //puts("inflateInit2 returned "); puthex(r); puts("\n"); + exit(); + } + s.next_in = src + i; + s.avail_in = *lenp - i; + s.next_out = dst; + s.avail_out = dstlen; + r = inflate(&s, Z_FINISH); + if (r != Z_OK && r != Z_STREAM_END) { + //puts("inflate returned "); puthex(r); puts("\n"); + exit(); + } + *lenp = s.next_out - (unsigned char *) dst; + inflateEnd(&s); +} + diff --git a/arch/xtensa/boot/ramdisk/Makefile b/arch/xtensa/boot/ramdisk/Makefile new file mode 100644 index 000000000000..b12f76352438 --- /dev/null +++ b/arch/xtensa/boot/ramdisk/Makefile @@ -0,0 +1,23 @@ +# +# Makefile for a ramdisk image +# + +BIG_ENDIAN := $(shell echo -e "\#ifdef __XTENSA_EL__\nint little;\n\#else\nint big;\n\#endif" | $(CC) -E -|grep -c big) + +ifeq ($(BIG_ENDIAN),1) +OBJCOPY_ARGS := -O elf32-xtensa-be +else +OBJCOPY_ARGS := -O elf32-xtensa-le +endif + +obj-y = ramdisk.o + +RAMDISK_IMAGE = arch/$(ARCH)/boot/ramdisk/$(CONFIG_EMBEDDED_RAMDISK_IMAGE) + +arch/$(ARCH)/boot/ramdisk/ramdisk.o: + $(Q)echo -e "dummy:" | $(AS) -o $@; + $(Q)$(OBJCOPY) $(OBJCOPY_ARGS) \ + --add-section .initrd=$(RAMDISK_IMAGE) \ + --set-section-flags .initrd=contents,alloc,load,load,data \ + arch/$(ARCH)/boot/ramdisk/ramdisk.o $@ + -- cgit v1.2.3-59-g8ed1b