From a25bd72badfa793ab5aeafd50dbd9db39f8c9179 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 24 Jul 2017 14:26:06 +1000
Subject: powerpc/mm/radix: Workaround prefetch issue with KVM

There's a somewhat architectural issue with Radix MMU and KVM.

When coming out of a guest with AIL (Alternate Interrupt Location, ie,
MMU enabled), we start executing hypervisor code with the PID register
still containing whatever the guest has been using.

The problem is that the CPU can (and will) then start prefetching or
speculatively load from whatever host context has that same PID (if
any), thus bringing translations for that context into the TLB, which
Linux doesn't know about.

This can cause stale translations and subsequent crashes.

Fixing this in a way that is neither racy nor a huge performance
impact is difficult. We could just make the host invalidations always
use broadcast forms but that would hurt single threaded programs for
example.

We chose to fix it instead by partitioning the PID space between guest
and host. This is possible because today Linux only use 19 out of the
20 bits of PID space, so existing guests will work if we make the host
use the top half of the 20 bits space.

We additionally add support for a property to indicate to Linux the
size of the PID register which will be useful if we eventually have
processors with a larger PID space available.

There is still an issue with malicious guests purposefully setting the
PID register to a value in the hosts PID range. Hopefully future HW
can prevent that, but in the meantime, we handle it with a pair of
kludges:

 - On the way out of a guest, before we clear the current VCPU in the
   PACA, we check the PID and if it's outside of the permitted range
   we flush the TLB for that PID.

 - When context switching, if the mm is "new" on that CPU (the
   corresponding bit was set for the first time in the mm cpumask), we
   check if any sibling thread is in KVM (has a non-NULL VCPU pointer
   in the PACA). If that is the case, we also flush the PID for that
   CPU (core).

This second part is needed to handle the case where a process is
migrated (or starts a new pthread) on a sibling thread of the CPU
coming out of KVM, as there's a window where stale translations can
exist before we detect it and flush them out.

A future optimization could be added by keeping track of whether the
PID has ever been used and avoid doing that for completely fresh PIDs.
We could similarily mark PIDs that have been the subject of a global
invalidation as "fresh". But for now this will do.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rework the asm to build with CONFIG_PPC_RADIX_MMU=n, drop
      unneeded include of kvm_book3s_asm.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/book3s/64/mmu.h | 15 ++++----
 arch/powerpc/include/asm/mmu_context.h   | 18 ++++++++--
 arch/powerpc/kvm/book3s_hv_rmhandlers.S  | 59 +++++++++++++++++++++++++++-----
 arch/powerpc/mm/mmu_context_book3s64.c   |  5 +--
 arch/powerpc/mm/pgtable-radix.c          | 34 +++++++++++++++++-
 arch/powerpc/mm/tlb-radix.c              | 45 ++++++++++++++++++++++--
 6 files changed, 154 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index 77529a3e3811..5b4023c616f7 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -59,13 +59,14 @@ extern struct patb_entry *partition_tb;
 #define PRTS_MASK	0x1f		/* process table size field */
 #define PRTB_MASK	0x0ffffffffffff000UL
 
-/*
- * Limit process table to PAGE_SIZE table. This
- * also limit the max pid we can support.
- * MAX_USER_CONTEXT * 16 bytes of space.
- */
-#define PRTB_SIZE_SHIFT	(CONTEXT_BITS + 4)
-#define PRTB_ENTRIES	(1ul << CONTEXT_BITS)
+/* Number of supported PID bits */
+extern unsigned int mmu_pid_bits;
+
+/* Base PID to allocate from */
+extern unsigned int mmu_base_pid;
+
+#define PRTB_SIZE_SHIFT	(mmu_pid_bits + 4)
+#define PRTB_ENTRIES	(1ul << mmu_pid_bits)
 
 /*
  * Power9 currently only support 64K partition table size.
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index da7e9432fa8f..0c76675394c5 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -45,7 +45,7 @@ extern void set_context(unsigned long id, pgd_t *pgd);
 
 #ifdef CONFIG_PPC_BOOK3S_64
 extern void radix__switch_mmu_context(struct mm_struct *prev,
-				     struct mm_struct *next);
+				      struct mm_struct *next);
 static inline void switch_mmu_context(struct mm_struct *prev,
 				      struct mm_struct *next,
 				      struct task_struct *tsk)
@@ -67,6 +67,12 @@ extern void __destroy_context(unsigned long context_id);
 extern void mmu_context_init(void);
 #endif
 
+#if defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE) && defined(CONFIG_PPC_RADIX_MMU)
+extern void radix_kvm_prefetch_workaround(struct mm_struct *mm);
+#else
+static inline void radix_kvm_prefetch_workaround(struct mm_struct *mm) { }
+#endif
+
 extern void switch_cop(struct mm_struct *next);
 extern int use_cop(unsigned long acop, struct mm_struct *mm);
 extern void drop_cop(unsigned long acop, struct mm_struct *mm);
@@ -79,9 +85,13 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev,
 				      struct mm_struct *next,
 				      struct task_struct *tsk)
 {
+	bool new_on_cpu = false;
+
 	/* Mark this context has been used on the new CPU */
-	if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next)))
+	if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next))) {
 		cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
+		new_on_cpu = true;
+	}
 
 	/* 32-bit keeps track of the current PGDIR in the thread struct */
 #ifdef CONFIG_PPC32
@@ -109,6 +119,10 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev,
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
 		asm volatile ("dssall");
 #endif /* CONFIG_ALTIVEC */
+
+	if (new_on_cpu)
+		radix_kvm_prefetch_workaround(next);
+
 	/*
 	 * The actual HW switching method differs between the various
 	 * sub architectures. Out of line for now
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index cb44065e2946..c52184a8efdf 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -1443,12 +1443,14 @@ mc_cont:
 	ori	r6,r6,1
 	mtspr	SPRN_CTRLT,r6
 4:
-	/* Read the guest SLB and save it away */
+	/* Check if we are running hash or radix and store it in cr2 */
 	ld	r5, VCPU_KVM(r9)
 	lbz	r0, KVM_RADIX(r5)
-	cmpwi	r0, 0
+	cmpwi	cr2,r0,0
+
+	/* Read the guest SLB and save it away */
 	li	r5, 0
-	bne	3f			/* for radix, save 0 entries */
+	bne	cr2, 3f			/* for radix, save 0 entries */
 	lwz	r0,VCPU_SLB_NR(r9)	/* number of entries in SLB */
 	mtctr	r0
 	li	r6,0
@@ -1712,11 +1714,6 @@ BEGIN_FTR_SECTION_NESTED(96)
 END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 22:
-	/* Clear out SLB */
-	li	r5,0
-	slbmte	r5,r5
-	slbia
-	ptesync
 
 	/* Restore host values of some registers */
 BEGIN_FTR_SECTION
@@ -1737,10 +1734,56 @@ BEGIN_FTR_SECTION
 	mtspr	SPRN_PID, r7
 	mtspr	SPRN_IAMR, r8
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
+#ifdef CONFIG_PPC_RADIX_MMU
+	/*
+	 * Are we running hash or radix ?
+	 */
+	beq	cr2,3f
+
+	/* Radix: Handle the case where the guest used an illegal PID */
+	LOAD_REG_ADDR(r4, mmu_base_pid)
+	lwz	r3, VCPU_GUEST_PID(r9)
+	lwz	r5, 0(r4)
+	cmpw	cr0,r3,r5
+	blt	2f
+
+	/*
+	 * Illegal PID, the HW might have prefetched and cached in the TLB
+	 * some translations for the  LPID 0 / guest PID combination which
+	 * Linux doesn't know about, so we need to flush that PID out of
+	 * the TLB. First we need to set LPIDR to 0 so tlbiel applies to
+	 * the right context.
+	*/
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	isync
+
+	/* Then do a congruence class local flush */
+	ld	r6,VCPU_KVM(r9)
+	lwz	r0,KVM_TLB_SETS(r6)
+	mtctr	r0
+	li	r7,0x400		/* IS field = 0b01 */
+	ptesync
+	sldi	r0,r3,32		/* RS has PID */
+1:	PPC_TLBIEL(7,0,2,1,1)		/* RIC=2, PRS=1, R=1 */
+	addi	r7,r7,0x1000
+	bdnz	1b
+	ptesync
+
+2:	/* Flush the ERAT on radix P9 DD1 guest exit */
 BEGIN_FTR_SECTION
 	PPC_INVALIDATE_ERAT
 END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1)
+	b	4f
+#endif /* CONFIG_PPC_RADIX_MMU */
 
+	/* Hash: clear out SLB */
+3:	li	r5,0
+	slbmte	r5,r5
+	slbia
+	ptesync
+4:
 	/*
 	 * POWER7/POWER8 guest -> host partition switch code.
 	 * We don't have to lock against tlbies but we do
diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c
index abed1fe6992f..a75f63833284 100644
--- a/arch/powerpc/mm/mmu_context_book3s64.c
+++ b/arch/powerpc/mm/mmu_context_book3s64.c
@@ -126,9 +126,10 @@ static int hash__init_new_context(struct mm_struct *mm)
 static int radix__init_new_context(struct mm_struct *mm)
 {
 	unsigned long rts_field;
-	int index;
+	int index, max_id;
 
-	index = alloc_context_id(1, PRTB_ENTRIES - 1);
+	max_id = (1 << mmu_pid_bits) - 1;
+	index = alloc_context_id(mmu_base_pid, max_id);
 	if (index < 0)
 		return index;
 
diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c
index 5cc50d47ce3f..671a45d86c18 100644
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -25,6 +25,9 @@
 
 #include <trace/events/thp.h>
 
+unsigned int mmu_pid_bits;
+unsigned int mmu_base_pid;
+
 static int native_register_process_table(unsigned long base, unsigned long pg_sz,
 					 unsigned long table_size)
 {
@@ -261,11 +264,34 @@ static void __init radix_init_pgtable(void)
 	for_each_memblock(memory, reg)
 		WARN_ON(create_physical_mapping(reg->base,
 						reg->base + reg->size));
+
+	/* Find out how many PID bits are supported */
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		if (!mmu_pid_bits)
+			mmu_pid_bits = 20;
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+		/*
+		 * When KVM is possible, we only use the top half of the
+		 * PID space to avoid collisions between host and guest PIDs
+		 * which can cause problems due to prefetch when exiting the
+		 * guest with AIL=3
+		 */
+		mmu_base_pid = 1 << (mmu_pid_bits - 1);
+#else
+		mmu_base_pid = 1;
+#endif
+	} else {
+		/* The guest uses the bottom half of the PID space */
+		if (!mmu_pid_bits)
+			mmu_pid_bits = 19;
+		mmu_base_pid = 1;
+	}
+
 	/*
 	 * Allocate Partition table and process table for the
 	 * host.
 	 */
-	BUILD_BUG_ON_MSG((PRTB_SIZE_SHIFT > 36), "Process table size too large.");
+	BUG_ON(PRTB_SIZE_SHIFT > 36);
 	process_tb = early_alloc_pgtable(1UL << PRTB_SIZE_SHIFT);
 	/*
 	 * Fill in the process table.
@@ -339,6 +365,12 @@ static int __init radix_dt_scan_page_sizes(unsigned long node,
 	if (type == NULL || strcmp(type, "cpu") != 0)
 		return 0;
 
+	/* Find MMU PID size */
+	prop = of_get_flat_dt_prop(node, "ibm,mmu-pid-bits", &size);
+	if (prop && size == 4)
+		mmu_pid_bits = be32_to_cpup(prop);
+
+	/* Grab page size encodings */
 	prop = of_get_flat_dt_prop(node, "ibm,processor-radix-AP-encodings", &size);
 	if (!prop)
 		return 0;
diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c
index 744e0164ecf5..16ae1bbe13f0 100644
--- a/arch/powerpc/mm/tlb-radix.c
+++ b/arch/powerpc/mm/tlb-radix.c
@@ -12,12 +12,12 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/memblock.h>
-#include <asm/ppc-opcode.h>
 
+#include <asm/ppc-opcode.h>
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 #include <asm/trace.h>
-
+#include <asm/cputhreads.h>
 
 #define RIC_FLUSH_TLB 0
 #define RIC_FLUSH_PWC 1
@@ -454,3 +454,44 @@ void radix__flush_tlb_pte_p9_dd1(unsigned long old_pte, struct mm_struct *mm,
 	else
 		radix__flush_tlb_page_psize(mm, address, mmu_virtual_psize);
 }
+
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+extern void radix_kvm_prefetch_workaround(struct mm_struct *mm)
+{
+	unsigned int pid = mm->context.id;
+
+	if (unlikely(pid == MMU_NO_CONTEXT))
+		return;
+
+	/*
+	 * If this context hasn't run on that CPU before and KVM is
+	 * around, there's a slim chance that the guest on another
+	 * CPU just brought in obsolete translation into the TLB of
+	 * this CPU due to a bad prefetch using the guest PID on
+	 * the way into the hypervisor.
+	 *
+	 * We work around this here. If KVM is possible, we check if
+	 * any sibling thread is in KVM. If it is, the window may exist
+	 * and thus we flush that PID from the core.
+	 *
+	 * A potential future improvement would be to mark which PIDs
+	 * have never been used on the system and avoid it if the PID
+	 * is new and the process has no other cpumask bit set.
+	 */
+	if (cpu_has_feature(CPU_FTR_HVMODE) && radix_enabled()) {
+		int cpu = smp_processor_id();
+		int sib = cpu_first_thread_sibling(cpu);
+		bool flush = false;
+
+		for (; sib <= cpu_last_thread_sibling(cpu) && !flush; sib++) {
+			if (sib == cpu)
+				continue;
+			if (paca[sib].kvm_hstate.kvm_vcpu)
+				flush = true;
+		}
+		if (flush)
+			_tlbiel_pid(pid, RIC_FLUSH_ALL);
+	}
+}
+EXPORT_SYMBOL_GPL(radix_kvm_prefetch_workaround);
+#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
-- 
cgit v1.2.3-59-g8ed1b


From 4fd1bd443e80b12f0a01a45fb9a793206b41cb72 Mon Sep 17 00:00:00 2001
From: Laurent Vivier <lvivier@redhat.com>
Date: Fri, 21 Jul 2017 16:51:39 +0200
Subject: powerpc/pseries: Fix of_node_put() underflow during reconfig remove

As for commit 68baf692c435 ("powerpc/pseries: Fix of_node_put()
underflow during DLPAR remove"), the call to of_node_put() must be
removed from pSeries_reconfig_remove_node().

dlpar_detach_node() and pSeries_reconfig_remove_node() both call
of_detach_node(), and thus the node should not be released in both
cases.

Fixes: 0829f6d1f69e ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/pseries/reconfig.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index e5bf1e84047f..011ef2180fe6 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -82,7 +82,6 @@ static int pSeries_reconfig_remove_node(struct device_node *np)
 
 	of_detach_node(np);
 	of_node_put(parent);
-	of_node_put(np); /* Must decrement the refcount */
 	return 0;
 }
 
-- 
cgit v1.2.3-59-g8ed1b


From b40b2386bce982ad97f3683b2b34e589c3be5c5a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Wed, 26 Jul 2017 15:00:42 +1000
Subject: powerpc/Makefile: Fix ld version check with 64-bit LE-only toolchain

In commit efe0160cfd40 ("powerpc/64: Linker on-demand sfpr functions
for modules"), we added an ld version check early in the powerpc
top-level Makefile.

Because the Makefile runs before the kernel config is setup, the
checks for CONFIG_CPU_LITTLE_ENDIAN etc. all take the default case. So
we end up configuring ld for 32-bit big endian.

That would be OK, except that for historical (or perhaps no) reason,
we use 'override LD' to add the endian flags to the LD variable
itself, rather than the normal approach of adding them to LDFLAGS.

The end result is that when we check the ld version we run it as:

  $(CROSS_COMPILE)ld -EB -m elf32ppc --version

This often works, unless you are using a 64-bit only and/or little
endian only, toolchain. In which case you see something like:

  $ make defconfig
  powerpc64le-linux-ld: unrecognised emulation mode: elf32ppc
  Supported emulations: elf64lppc elf32lppc elf32lppclinux elf32lppcsim
  /bin/sh: 1: [: -ge: unexpected operator

The proper fix is to stop using 'override LD', but that will require a
fair bit of testing. Instead we can fix it for now just by reordering
the Makefile to do the version check earlier.

Fixes: efe0160cfd40 ("powerpc/64: Linker on-demand sfpr functions for modules")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/Makefile | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 8d4ed73d5490..e2b3e7a00c9e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -59,6 +59,19 @@ machine-$(CONFIG_PPC64) += 64
 machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
 UTS_MACHINE := $(subst $(space),,$(machine-y))
 
+# XXX This needs to be before we override LD below
+ifdef CONFIG_PPC32
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+else
+ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
+# Have the linker provide sfpr if possible.
+# There is a corresponding test in arch/powerpc/lib/Makefile
+KBUILD_LDFLAGS_MODULE += --save-restore-funcs
+else
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+endif
+endif
+
 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
 override LD	+= -EL
 LDEMULATION	:= lppc
@@ -190,18 +203,6 @@ else
 CHECKFLAGS	+= -D__LITTLE_ENDIAN__
 endif
 
-ifdef CONFIG_PPC32
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
-else
-ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
-# Have the linker provide sfpr if possible.
-# There is a corresponding test in arch/powerpc/lib/Makefile
-KBUILD_LDFLAGS_MODULE += --save-restore-funcs
-else
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
-endif
-endif
-
 ifeq ($(CONFIG_476FPE_ERR46),y)
 	KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
 		-T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
-- 
cgit v1.2.3-59-g8ed1b


From 0da12a7a81f1e2255e89dc783c565e84801475a2 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Sat, 17 Jun 2017 20:00:55 +0530
Subject: powerpc/mm/hash: Free the subpage_prot_table correctly

Fixes: dad6f37c2602e ("powerpc: subpage_protect: Increase the array size to take care of 64TB")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/mm/subpage-prot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index e94fbd4c8845..781532d7bc4d 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -36,7 +36,7 @@ void subpage_prot_free(struct mm_struct *mm)
 		}
 	}
 	addr = 0;
-	for (i = 0; i < 2; ++i) {
+	for (i = 0; i < (TASK_SIZE_USER64 >> 43); ++i) {
 		p = spt->protptrs[i];
 		if (!p)
 			continue;
-- 
cgit v1.2.3-59-g8ed1b


From c9c98bc5cc2ab4e0d5c9ad58286fa7e1670dfded Mon Sep 17 00:00:00 2001
From: Oliver O'Halloran <oohall@gmail.com>
Date: Fri, 28 Jul 2017 01:35:53 +1000
Subject: powerpc/mm: Fix pmd/pte_devmap() on non-leaf entries

The Radix MMU translation tree as defined in ISA v3.0 contains two
different types of entry, directories and leaves. Leaves are
identified by _PAGE_PTE being set.

The formats of the two entries are different, with the directory
entries containing no spare bits for use by software. In particular
the bit we use for _PAGE_DEVMAP is not reserved for software, and is
part of the NLB (Next Level Base) field, essentially the address of
the next level in the tree.

Note that the Linux pte_t is not == _PAGE_PTE. A huge page pmd
entry (or devmap!) is also a leaf and so has _PAGE_PTE set, even
though we use a pmd_t for it in Linux.

The fix is to ensure that the pmd/pte_devmap() confirm they are
looking at a leaf entry (_PAGE_PTE) as well as checking _PAGE_DEVMAP.

Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Add a comment in the code and flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/book3s/64/pgtable.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index d1da415e283c..818a58fc3f4f 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -608,9 +608,17 @@ static inline pte_t pte_mkdevmap(pte_t pte)
 	return __pte(pte_val(pte) | _PAGE_SPECIAL|_PAGE_DEVMAP);
 }
 
+/*
+ * This is potentially called with a pmd as the argument, in which case it's not
+ * safe to check _PAGE_DEVMAP unless we also confirm that _PAGE_PTE is set.
+ * That's because the bit we use for _PAGE_DEVMAP is not reserved for software
+ * use in page directory entries (ie. non-ptes).
+ */
 static inline int pte_devmap(pte_t pte)
 {
-	return !!(pte_raw(pte) & cpu_to_be64(_PAGE_DEVMAP));
+	u64 mask = cpu_to_be64(_PAGE_DEVMAP | _PAGE_PTE);
+
+	return (pte_raw(pte) & mask) == mask;
 }
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-- 
cgit v1.2.3-59-g8ed1b


From cd63f3cf1d59b7ad8419eba1cac8f9126e79cc43 Mon Sep 17 00:00:00 2001
From: Gustavo Romero <gromero@linux.vnet.ibm.com>
Date: Wed, 19 Jul 2017 01:44:13 -0400
Subject: powerpc/tm: Fix saving of TM SPRs in core dump

Currently flush_tmregs_to_thread() does not save the TM SPRs (TFHAR,
TFIAR, TEXASR) to the thread struct, unless the process is currently
inside a suspended transaction.

If the process is core dumping, and the TM SPRs have changed since the
last time the process was context switched, then we will save stale
values of the TM SPRs to the core dump.

Fix it by saving the live register state to the thread struct in that
case.

Fixes: 08e1c01d6aed ("powerpc/ptrace: Enable support for TM SPR state")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/ptrace.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 925a4ef90559..660ed39e9c9a 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -127,12 +127,19 @@ static void flush_tmregs_to_thread(struct task_struct *tsk)
 	 * If task is not current, it will have been flushed already to
 	 * it's thread_struct during __switch_to().
 	 *
-	 * A reclaim flushes ALL the state.
+	 * A reclaim flushes ALL the state or if not in TM save TM SPRs
+	 * in the appropriate thread structures from live.
 	 */
 
-	if (tsk == current && MSR_TM_SUSPENDED(mfmsr()))
-		tm_reclaim_current(TM_CAUSE_SIGNAL);
+	if (tsk != current)
+		return;
 
+	if (MSR_TM_SUSPENDED(mfmsr())) {
+		tm_reclaim_current(TM_CAUSE_SIGNAL);
+	} else {
+		tm_enable();
+		tm_save_sprs(&(tsk->thread));
+	}
 }
 #else
 static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
-- 
cgit v1.2.3-59-g8ed1b


From 7b7622bb95eb587cbaa79608e47b832a82a262b1 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Thu, 27 Jul 2017 23:23:37 +1000
Subject: powerpc/smp: Call smp_ops->setup_cpu() directly on the boot CPU

In smp_cpus_done() we need to call smp_ops->setup_cpu() for the boot
CPU, which means it has to run *on* the boot CPU.

In the past we ensured it ran on the boot CPU by changing the CPU
affinity mask of current directly. That was removed in commit
6d11b87d55eb ("powerpc/smp: Replace open coded task affinity logic"),
and replaced with a work queue call.

Unfortunately using a work queue leads to a lockdep warning, now that
the CPU hotplug lock is a regular semaphore:

  ======================================================
  WARNING: possible circular locking dependency detected
  ...
  kworker/0:1/971 is trying to acquire lock:
   (cpu_hotplug_lock.rw_sem){++++++}, at: [<c000000000100974>] apply_workqueue_attrs+0x34/0xa0

  but task is already holding lock:
   ((&wfc.work)){+.+.+.}, at: [<c0000000000fdb2c>] process_one_work+0x25c/0x800
  ...
       CPU0                    CPU1
       ----                    ----
  lock((&wfc.work));
                               lock(cpu_hotplug_lock.rw_sem);
                               lock((&wfc.work));
  lock(cpu_hotplug_lock.rw_sem);

Although the deadlock can't happen in practice, because
smp_cpus_done() only runs in early boot before CPU hotplug is allowed,
lockdep can't tell that.

Luckily in commit 8fb12156b8db ("init: Pin init task to the boot CPU,
initially") tglx changed the generic code to pin init to the boot CPU
to begin with. The unpinning of init from the boot CPU happens in
sched_init_smp(), which is called after smp_cpus_done().

So smp_cpus_done() is always called on the boot CPU, which means we
don't need the work queue call at all - and the lockdep warning goes
away.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/powerpc/kernel/smp.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index c6b8bace1766..b0ea6d4d4853 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -985,21 +985,13 @@ static struct sched_domain_topology_level powerpc_topology[] = {
 	{ NULL, },
 };
 
-static __init long smp_setup_cpu_workfn(void *data __always_unused)
-{
-	smp_ops->setup_cpu(boot_cpuid);
-	return 0;
-}
-
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	/*
-	 * We want the setup_cpu() here to be called on the boot CPU, but
-	 * init might run on any CPU, so make sure it's invoked on the boot
-	 * CPU.
+	 * We are running pinned to the boot CPU, see rest_init().
 	 */
 	if (smp_ops && smp_ops->setup_cpu)
-		work_on_cpu_safe(boot_cpuid, smp_setup_cpu_workfn, NULL);
+		smp_ops->setup_cpu(boot_cpuid);
 
 	if (smp_ops && smp_ops->bringup_done)
 		smp_ops->bringup_done();
-- 
cgit v1.2.3-59-g8ed1b


From 65c5ec11c25eff6ba6e9b1cbfff014875fddd1e0 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Wed, 26 Jul 2017 23:19:04 +1000
Subject: powerpc/boot: Fix 64-bit boot wrapper build with non-biarch compiler
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Historically the boot wrapper was always built 32-bit big endian, even
for 64-bit kernels. That was because old firmwares didn't necessarily
support booting a 64-bit image. Because of that arch/powerpc/boot/Makefile
uses CROSS32CC for compilation.

However when we added 64-bit little endian support, we also added
support for building the boot wrapper 64-bit. However we kept using
CROSS32CC, because in most cases it is just CC and everything works.

However if the user doesn't specify CROSS32_COMPILE (which no one ever
does AFAIK), and CC is *not* biarch (32/64-bit capable), then CROSS32CC
becomes just "gcc". On native systems that is probably OK, but if we're
cross building it definitely isn't, leading to eg:

  gcc ... -m64 -mlittle-endian -mabi=elfv2 ... arch/powerpc/boot/cpm-serial.c
  gcc: error: unrecognized argument in option ‘-mabi=elfv2’
  gcc: error: unrecognized command line option ‘-mlittle-endian’
  make: *** [zImage] Error 2

To fix it, stop using CROSS32CC, because we may or may not be building
32-bit. Instead setup a BOOTCC, which defaults to CC, and only use
CROSS32_COMPILE if it's set and we're building for 32-bit.

Fixes: 147c05168fc8 ("powerpc/boot: Add support for 64bit little endian wrapper")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
---
 arch/powerpc/boot/Makefile | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index a7814a7b1523..6f952fe1f084 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -25,12 +25,20 @@ compress-$(CONFIG_KERNEL_XZ)   := CONFIG_KERNEL_XZ
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-		 -isystem $(shell $(CROSS32CC) -print-file-name=include) \
 		 -D$(compress-y)
 
+BOOTCC := $(CC)
 ifdef CONFIG_PPC64_BOOT_WRAPPER
 BOOTCFLAGS	+= -m64
+else
+BOOTCFLAGS	+= -m32
+ifdef CROSS32_COMPILE
+    BOOTCC := $(CROSS32_COMPILE)gcc
+endif
 endif
+
+BOOTCFLAGS	+= -isystem $(shell $(BOOTCC) -print-file-name=include)
+
 ifdef CONFIG_CPU_BIG_ENDIAN
 BOOTCFLAGS	+= -mbig-endian
 else
@@ -183,10 +191,10 @@ clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
 		empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
 
 quiet_cmd_bootcc = BOOTCC  $@
-      cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
+      cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
 
 quiet_cmd_bootas = BOOTAS  $@
-      cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
+      cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 
 quiet_cmd_bootar = BOOTAR  $@
       cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
-- 
cgit v1.2.3-59-g8ed1b


From 253fd51e2f533552ae35a0c661705da6c4842c1b Mon Sep 17 00:00:00 2001
From: Alistair Popple <alistair@popple.id.au>
Date: Wed, 26 Jul 2017 15:26:40 +1000
Subject: powerpc/powernv/pci: Return failure for some uses of dma_set_mask()

Commit 8e3f1b1d8255 ("powerpc/powernv/pci: Enable 64-bit devices to access
>4GB DMA space") introduced the ability for PCI device drivers to request a
DMA mask between 64 and 32 bits and actually get a mask greater than
32-bits. However currently if certain machine configuration dependent
conditions are not meet the code silently falls back to a 32-bit mask.

This makes it hard for device drivers to detect which mask they actually
got. Instead we should return an error when the request could not be
fulfilled which allows drivers to either fallback or implement other
workarounds as documented in DMA-API-HOWTO.txt.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/pci-ioda.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 437613588df1..b900eb1d5e17 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1852,6 +1852,14 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 			/* 4GB offset bypasses 32-bit space */
 			set_dma_offset(&pdev->dev, (1ULL << 32));
 			set_dma_ops(&pdev->dev, &dma_direct_ops);
+		} else if (dma_mask >> 32 && dma_mask != DMA_BIT_MASK(64)) {
+			/*
+			 * Fail the request if a DMA mask between 32 and 64 bits
+			 * was requested but couldn't be fulfilled. Ideally we
+			 * would do this for 64-bits but historically we have
+			 * always fallen back to 32-bits.
+			 */
+			return -ENOMEM;
 		} else {
 			dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
 			set_dma_ops(&pdev->dev, &dma_iommu_ops);
-- 
cgit v1.2.3-59-g8ed1b


From cc491f1d3583146eaee635c86b9c9227fa835c6c Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Sat, 29 Jul 2017 22:50:27 +1000
Subject: powerpc/64s: Fix stack setup in watchdog soft_nmi_common()

The watchdog soft-NMI exception stack setup loads a stack pointer
twice, which is an obvious error. It ends up using the system reset
interrupt (true-NMI) stack, which is also a bug because the watchdog
could be preempted by a system reset interrupt that overwrites the
NMI stack.

Change the soft-NMI to use the "emergency stack". The current kernel
stack is not used, because of the longer-term goal to prevent
asynchronous stack access using soft-disable.

Fixes: 2104180a5369 ("powerpc/64s: implement arch-specific hardlockup watchdog")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/exceptions-64s.S | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 9029afd1fa2a..f14f3c04ec7e 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1325,10 +1325,18 @@ EXC_VIRT_NONE(0x5800, 0x100)
 	std	r10,PACA_EXGEN+EX_R13(r13);		\
 	EXCEPTION_PROLOG_PSERIES_1(soft_nmi_common, _H)
 
+/*
+ * Branch to soft_nmi_interrupt using the emergency stack. The emergency
+ * stack is one that is usable by maskable interrupts so long as MSR_EE
+ * remains off. It is used for recovery when something has corrupted the
+ * normal kernel stack, for example. The "soft NMI" must not use the process
+ * stack because we want irq disabled sections to avoid touching the stack
+ * at all (other than PMU interrupts), so use the emergency stack for this,
+ * and run it entirely with interrupts hard disabled.
+ */
 EXC_COMMON_BEGIN(soft_nmi_common)
 	mr	r10,r1
 	ld	r1,PACAEMERGSP(r13)
-	ld	r1,PACA_NMI_EMERG_SP(r13)
 	subi	r1,r1,INT_FRAME_SIZE
 	EXCEPTION_COMMON_NORET_STACK(PACA_EXGEN, 0x900,
 			system_reset, soft_nmi_interrupt,
-- 
cgit v1.2.3-59-g8ed1b


From f29bb7861a5107cc1afbf5a565c3109aa88d5984 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sat, 29 Jul 2017 22:52:09 +0300
Subject: powerpc/83xx/mpc832x_rdb: fix of_irq_to_resource() error check

of_irq_to_resource() has recently been fixed to return negative error #'s
along with 0 in case of failure, however the Freescale MPC832x RDB board
code still only regards 0 as a failure indication -- fix it up.

Fixes: 7a4228bbff76 ("of: irq: use of_irq_get() in of_irq_to_resource()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/83xx/mpc832x_rdb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index d7c9b186954d..763ffca9628d 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -89,7 +89,7 @@ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
 			goto err;
 
 		ret = of_irq_to_resource(np, 0, &res[1]);
-		if (!ret)
+		if (ret <= 0)
 			goto err;
 
 		pdev = platform_device_alloc("mpc83xx_spi", i);
-- 
cgit v1.2.3-59-g8ed1b


From 09539f9b123652e969894d6299ae0df2fe12cb5d Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Thu, 20 Jul 2017 11:53:22 +1000
Subject: powerpc/perf: POWER9 PMU stops after idle workaround

POWER9 DD2 PMU can stop after a state-loss idle in some conditions.

A solution is to set then clear MMCRA[60] after wake from state-loss
idle. MMCRA[60] is a non-architected bit, see the user manual for
details.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/idle_book3s.S | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 516ebef905c0..e6252c5a57a4 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -460,11 +460,17 @@ pnv_restore_hyp_resource_arch300:
 	/*
 	 * Workaround for POWER9, if we lost resources, the ERAT
 	 * might have been mixed up and needs flushing. We also need
-	 * to reload MMCR0 (see comment above).
+	 * to reload MMCR0 (see comment above). We also need to set
+	 * then clear bit 60 in MMCRA to ensure the PMU starts running.
 	 */
 	blt	cr3,1f
 	PPC_INVALIDATE_ERAT
 	ld	r1,PACAR1(r13)
+	mfspr	r4,SPRN_MMCRA
+	ori	r4,r4,(1 << (63-60))
+	mtspr	SPRN_MMCRA,r4
+	xori	r4,r4,(1 << (63-60))
+	mtspr	SPRN_MMCRA,r4
 	ld	r4,_MMCR0(r1)
 	mtspr	SPRN_MMCR0,r4
 1:
-- 
cgit v1.2.3-59-g8ed1b


From 3db40c312c2c1eb2187c5731102fa8ff380e6e40 Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Tue, 1 Aug 2017 23:59:28 +1000
Subject: powerpc/64: Fix __check_irq_replay missing decrementer interrupt

If the decrementer wraps again and de-asserts the decrementer
exception while hard-disabled, __check_irq_replay() has a test to
notice the wrap when interrupts are re-enabled.

The decrementer check must be done when clearing the PACA_IRQ_HARD_DIS
flag, not when the PACA_IRQ_DEC flag is tested. Previously this worked
because the decrementer interrupt was always the first one checked
after clearing the hard disable flag, but HMI check was moved ahead of
that, which introduced this bug.

This can cause a missed decrementer interrupt if we soft-disable
interrupts then take an HMI which is recorded in irq_happened, then
hard-disable interrupts for > 4s to wrap the decrementer.

Fixes: e0e0d6b7390b ("powerpc/64: Replay hypervisor maintenance interrupt first")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/irq.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 0bcec745a672..f291f7826abc 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -145,6 +145,19 @@ notrace unsigned int __check_irq_replay(void)
 
 	/* Clear bit 0 which we wouldn't clear otherwise */
 	local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+	if (happened & PACA_IRQ_HARD_DIS) {
+		/*
+		 * We may have missed a decrementer interrupt if hard disabled.
+		 * Check the decrementer register in case we had a rollover
+		 * while hard disabled.
+		 */
+		if (!(happened & PACA_IRQ_DEC)) {
+			if (decrementer_check_overflow()) {
+				local_paca->irq_happened |= PACA_IRQ_DEC;
+				happened |= PACA_IRQ_DEC;
+			}
+		}
+	}
 
 	/*
 	 * Force the delivery of pending soft-disabled interrupts on PS3.
@@ -170,7 +183,7 @@ notrace unsigned int __check_irq_replay(void)
 	 * in case we also had a rollover while hard disabled
 	 */
 	local_paca->irq_happened &= ~PACA_IRQ_DEC;
-	if ((happened & PACA_IRQ_DEC) || decrementer_check_overflow())
+	if (happened & PACA_IRQ_DEC)
 		return 0x900;
 
 	/* Finally check if an external interrupt happened */
-- 
cgit v1.2.3-59-g8ed1b


From 44a12806d010944a5727f1dc99123121e3e2c8c6 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Mon, 7 Aug 2017 21:25:01 +1000
Subject: Revert "powerpc/64: Avoid restore_math call if possible in syscall
 exit"

This reverts commit bc4f65e4cf9d6cc43e0e9ba0b8648cf9201cd55f.

As reported by Andreas, this commit is causing unrecoverable SLB misses in the
system call exit path:

  Unrecoverable exception 4100 at c00000000000a1ec
  Oops: Unrecoverable exception, sig: 6 [#1]
  SMP NR_CPUS=2 PowerMac
  ...
  CPU: 0 PID: 18626 Comm: rm Not tainted 4.13.0-rc3 #1
  task: c00000018335e080 task.stack: c000000139e50000
  NIP: c00000000000a1ec LR: c00000000000a118 CTR: 0000000000000000
  REGS: c000000139e53bb0 TRAP: 4100   Not tainted  (4.13.0-rc3)
  MSR: 9000000000001030 <SF,HV,ME,IR,DR> CR: 24000044  XER: 20000000 SOFTE: 1
  GPR00: 0000000000000000 c000000139e53e30 c000000000abb500 fffffffffffffffe
  GPR04: c0000001eb866298 0000000000000000 0000000000000000 c00000018335e080
  GPR08: 900000000000d032 0000000000000000 0000000000000002 fffffffffffff001
  GPR12: c000000139e50000 c00000000ffff000 00003fffa8c0dca0 00003fffa8c0dc88
  GPR16: 0000000010000000 0000000000000001 00003fffa8c0eaa0 0000000000000000
  GPR20: 00003fffa8c27528 00003fffa8c27b00 0000000000000000 0000000000000000
  GPR24: 00003fffa8c0d918 00003ffff1b3efa0 00003fffa8c26d68 0000000000000000
  GPR28: 00003fffa8c249e8 00003fffa8c263d0 00003fffa8c27550 00003ffff1b3ef10
  NIP [c00000000000a1ec] system_call_exit+0xc0/0x21c
  LR [c00000000000a118] system_call+0x58/0x6c
  Call Trace:
  [c000000139e53e30] [c00000000000a118] system_call+0x58/0x6c (unreliable)
  Instruction dump:
  64a51000 7c6300d0 f8a101a0 4bffff9c 3c000000 60000006 780007c6 64000000
  60000000 7c004039 4082001c e8ed0170 <88070b78> 88c70b79 7c003214 2c200000

This is caused by us trying to load THREAD_LOAD_FP with MSR_RI=0, and taking an
SLB miss on the thread struct.

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Diagnosed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/entry_64.S | 60 +++++++++++++-----------------------------
 arch/powerpc/kernel/process.c  |  4 ---
 2 files changed, 18 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 49d8422767b4..e925c1c99c71 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -223,17 +223,27 @@ system_call_exit:
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	.Lsyscall_exit_work
 
-	/* If MSR_FP and MSR_VEC are set in user msr, then no need to restore */
-	li	r7,MSR_FP
+	andi.	r0,r8,MSR_FP
+	beq 2f
 #ifdef CONFIG_ALTIVEC
-	oris	r7,r7,MSR_VEC@h
+	andis.	r0,r8,MSR_VEC@h
+	bne	3f
 #endif
-	and	r0,r8,r7
-	cmpd	r0,r7
-	bne	.Lsyscall_restore_math
-.Lsyscall_restore_math_cont:
+2:	addi    r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_BOOK3S
+	li	r10,MSR_RI
+	mtmsrd	r10,1		/* Restore RI */
+#endif
+	bl	restore_math
+#ifdef CONFIG_PPC_BOOK3S
+	li	r11,0
+	mtmsrd	r11,1
+#endif
+	ld	r8,_MSR(r1)
+	ld	r3,RESULT(r1)
+	li	r11,-MAX_ERRNO
 
-	cmpld	r3,r11
+3:	cmpld	r3,r11
 	ld	r5,_CCR(r1)
 	bge-	.Lsyscall_error
 .Lsyscall_error_cont:
@@ -267,40 +277,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	std	r5,_CCR(r1)
 	b	.Lsyscall_error_cont
 
-.Lsyscall_restore_math:
-	/*
-	 * Some initial tests from restore_math to avoid the heavyweight
-	 * C code entry and MSR manipulations.
-	 */
-	LOAD_REG_IMMEDIATE(r0, MSR_TS_MASK)
-	and.	r0,r0,r8
-	bne	1f
-
-	ld	r7,PACACURRENT(r13)
-	lbz	r0,THREAD+THREAD_LOAD_FP(r7)
-#ifdef CONFIG_ALTIVEC
-	lbz	r6,THREAD+THREAD_LOAD_VEC(r7)
-	add	r0,r0,r6
-#endif
-	cmpdi	r0,0
-	beq	.Lsyscall_restore_math_cont
-
-1:	addi    r3,r1,STACK_FRAME_OVERHEAD
-#ifdef CONFIG_PPC_BOOK3S
-	li	r10,MSR_RI
-	mtmsrd	r10,1		/* Restore RI */
-#endif
-	bl	restore_math
-#ifdef CONFIG_PPC_BOOK3S
-	li	r11,0
-	mtmsrd	r11,1
-#endif
-	/* Restore volatiles, reload MSR from updated one */
-	ld	r8,_MSR(r1)
-	ld	r3,RESULT(r1)
-	li	r11,-MAX_ERRNO
-	b	.Lsyscall_restore_math_cont
-
 /* Traced system call support */
 .Lsyscall_dotrace:
 	bl	save_nvgprs
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 9f3e2c932dcc..ec480966f9bf 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -511,10 +511,6 @@ void restore_math(struct pt_regs *regs)
 {
 	unsigned long msr;
 
-	/*
-	 * Syscall exit makes a similar initial check before branching
-	 * to restore_math. Keep them in synch.
-	 */
 	if (!msr_tm_active(regs->msr) &&
 		!current->thread.load_fp && !loadvec(current->thread))
 		return;
-- 
cgit v1.2.3-59-g8ed1b


From 785a12afdb4a52903447fd890633c82fdda4b6f7 Mon Sep 17 00:00:00 2001
From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
Date: Tue, 8 Aug 2017 14:13:15 +0530
Subject: powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api
 fails

Currently, we use the opal call opal_slw_set_reg() to inform the
Sleep-Winkle Engine (SLW) to restore the contents of some of the
Hypervisor state on wakeup from deep idle states that lose full
hypervisor context (characterized by the flag
OPAL_PM_LOSE_FULL_CONTEXT).

However, the current code has a bug in that if opal_slw_set_reg()
fails, we don't disable the use of these deep states (winkle on
POWER8, stop4 onwards on POWER9).

This patch fixes this bug by ensuring that if programing the
sleep-winkle engine to restore the hypervisor states in
pnv_save_sprs_for_deep_states() fails, then we exclude such states by
clearing the OPAL_PM_LOSE_FULL_CONTEXT flag from
supported_cpuidle_states. As a result POWER8 will be prevented from
using winkle for CPU-Hotplug, and POWER9 will put the offlined CPUs to
the default stop state when available.

Further, we ensure in the initialization of the cpuidle-powernv driver
to only include those states whose flags are present in
supported_cpuidle_states, thereby skipping OPAL_PM_LOSE_FULL_CONTEXT
states when they have been disabled due to stop-api failure.

Fixes: 1e1601b38e6 ("powerpc/powernv/idle: Restore SPRs for deep idle
states via stop API.")

Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/idle.c | 41 ++++++++++++++++++++++++++++++++---
 drivers/cpuidle/cpuidle-powernv.c     | 10 +++++++++
 2 files changed, 48 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 2abee070373f..a553aeea7af6 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -56,6 +56,7 @@ u64 pnv_first_deep_stop_state = MAX_STOP_STATE;
  */
 static u64 pnv_deepest_stop_psscr_val;
 static u64 pnv_deepest_stop_psscr_mask;
+static u64 pnv_deepest_stop_flag;
 static bool deepest_stop_found;
 
 static int pnv_save_sprs_for_deep_states(void)
@@ -185,8 +186,40 @@ static void pnv_alloc_idle_core_states(void)
 
 	update_subcore_sibling_mask();
 
-	if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT)
-		pnv_save_sprs_for_deep_states();
+	if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) {
+		int rc = pnv_save_sprs_for_deep_states();
+
+		if (likely(!rc))
+			return;
+
+		/*
+		 * The stop-api is unable to restore hypervisor
+		 * resources on wakeup from platform idle states which
+		 * lose full context. So disable such states.
+		 */
+		supported_cpuidle_states &= ~OPAL_PM_LOSE_FULL_CONTEXT;
+		pr_warn("cpuidle-powernv: Disabling idle states that lose full context\n");
+		pr_warn("cpuidle-powernv: Idle power-savings, CPU-Hotplug affected\n");
+
+		if (cpu_has_feature(CPU_FTR_ARCH_300) &&
+		    (pnv_deepest_stop_flag & OPAL_PM_LOSE_FULL_CONTEXT)) {
+			/*
+			 * Use the default stop state for CPU-Hotplug
+			 * if available.
+			 */
+			if (default_stop_found) {
+				pnv_deepest_stop_psscr_val =
+					pnv_default_stop_val;
+				pnv_deepest_stop_psscr_mask =
+					pnv_default_stop_mask;
+				pr_warn("cpuidle-powernv: Offlined CPUs will stop with psscr = 0x%016llx\n",
+					pnv_deepest_stop_psscr_val);
+			} else { /* Fallback to snooze loop for CPU-Hotplug */
+				deepest_stop_found = false;
+				pr_warn("cpuidle-powernv: Offlined CPUs will busy wait\n");
+			}
+		}
+	}
 }
 
 u32 pnv_get_supported_cpuidle_states(void)
@@ -375,7 +408,8 @@ unsigned long pnv_cpu_offline(unsigned int cpu)
 						pnv_deepest_stop_psscr_val;
 		srr1 = power9_idle_stop(psscr);
 
-	} else if (idle_states & OPAL_PM_WINKLE_ENABLED) {
+	} else if ((idle_states & OPAL_PM_WINKLE_ENABLED) &&
+		   (idle_states & OPAL_PM_LOSE_FULL_CONTEXT)) {
 		srr1 = power7_idle_insn(PNV_THREAD_WINKLE);
 	} else if ((idle_states & OPAL_PM_SLEEP_ENABLED) ||
 		   (idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
@@ -553,6 +587,7 @@ static int __init pnv_power9_idle_init(struct device_node *np, u32 *flags,
 			max_residency_ns = residency_ns[i];
 			pnv_deepest_stop_psscr_val = psscr_val[i];
 			pnv_deepest_stop_psscr_mask = psscr_mask[i];
+			pnv_deepest_stop_flag = flags[i];
 			deepest_stop_found = true;
 		}
 
diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
index 37b0698b7193..42896a67aeae 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -235,6 +235,7 @@ static inline int validate_dt_prop_sizes(const char *prop1, int prop1_len,
 	return -1;
 }
 
+extern u32 pnv_get_supported_cpuidle_states(void);
 static int powernv_add_idle_states(void)
 {
 	struct device_node *power_mgt;
@@ -248,6 +249,8 @@ static int powernv_add_idle_states(void)
 	const char *names[CPUIDLE_STATE_MAX];
 	u32 has_stop_states = 0;
 	int i, rc;
+	u32 supported_flags = pnv_get_supported_cpuidle_states();
+
 
 	/* Currently we have snooze statically defined */
 
@@ -362,6 +365,13 @@ static int powernv_add_idle_states(void)
 	for (i = 0; i < dt_idle_states; i++) {
 		unsigned int exit_latency, target_residency;
 		bool stops_timebase = false;
+
+		/*
+		 * Skip the platform idle state whose flag isn't in
+		 * the supported_cpuidle_states flag mask.
+		 */
+		if ((flags[i] & supported_flags) != flags[i])
+			continue;
 		/*
 		 * If an idle state has exit latency beyond
 		 * POWERNV_THRESHOLD_LATENCY_NS then don't use it
-- 
cgit v1.2.3-59-g8ed1b


From 7310d5c8c55e8987a854507f71022f8de676bbf4 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Wed, 9 Aug 2017 20:57:55 +1000
Subject: powerpc/configs: Re-enable HARD/SOFT lockup detectors

In commit 05a4a9527931 ("kernel/watchdog: split up config options"),
CONFIG_LOCKUP_DETECTOR was split into two separate config options,
CONFIG_HARDLOCKUP_DETECTOR and CONFIG_SOFTLOCKUP_DETECTOR.

Our defconfigs still have CONFIG_LOCKUP_DETECTOR=y, but that is no longer
user selectable, and we don't mention the new options, so we end up with
none of them enabled.

So update the defconfigs to turn on the new SOFT and HARD options, the
end result being the same as what we had previously.

Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/configs/powernv_defconfig | 3 ++-
 arch/powerpc/configs/ppc64_defconfig   | 3 ++-
 arch/powerpc/configs/pseries_defconfig | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index 0695ce047d56..34fc9bbfca9e 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -293,7 +293,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_HARDLOCKUP_DETECTOR=y
 CONFIG_LATENCYTOP=y
 CONFIG_SCHED_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 5175028c56ce..c5246d29f385 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -324,7 +324,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_HARDLOCKUP_DETECTOR=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_LATENCYTOP=y
 CONFIG_SCHED_TRACER=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1a61aa20dfba..fd5d98a0b95c 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -291,7 +291,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_HARDLOCKUP_DETECTOR=y
 CONFIG_LATENCYTOP=y
 CONFIG_SCHED_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
-- 
cgit v1.2.3-59-g8ed1b


From 0459ddfdb31e7d812b555a2530ecbacdf96961a6 Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Wed, 9 Aug 2017 22:41:21 +1000
Subject: powerpc: NMI IPI improve lock primitive

When the NMI IPI lock is contended, spin at low SMT priority, using
loads only, and with interrupts enabled (where possible). This
improves behaviour under high contention (e.g., a system crash when
a number of CPUs are trying to enter the debugger).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/smp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index cf0e1245b8cc..8d3320562c70 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -351,7 +351,7 @@ static void nmi_ipi_lock_start(unsigned long *flags)
 	hard_irq_disable();
 	while (atomic_cmpxchg(&__nmi_ipi_lock, 0, 1) == 1) {
 		raw_local_irq_restore(*flags);
-		cpu_relax();
+		spin_until_cond(atomic_read(&__nmi_ipi_lock) == 0);
 		raw_local_irq_save(*flags);
 		hard_irq_disable();
 	}
@@ -360,7 +360,7 @@ static void nmi_ipi_lock_start(unsigned long *flags)
 static void nmi_ipi_lock(void)
 {
 	while (atomic_cmpxchg(&__nmi_ipi_lock, 0, 1) == 1)
-		cpu_relax();
+		spin_until_cond(atomic_read(&__nmi_ipi_lock) == 0);
 }
 
 static void nmi_ipi_unlock(void)
@@ -475,7 +475,7 @@ int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us)
 	nmi_ipi_lock_start(&flags);
 	while (nmi_ipi_busy_count) {
 		nmi_ipi_unlock_end(&flags);
-		cpu_relax();
+		spin_until_cond(nmi_ipi_busy_count == 0);
 		nmi_ipi_lock_start(&flags);
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From d8e2a4053574002135fbb032c2e74f1d1dbb2103 Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Wed, 9 Aug 2017 22:41:22 +1000
Subject: powerpc/watchdog: Improve watchdog lock primitive

- Hard-disable interrupts before taking the lock, which prevents
  soft-NMI re-entrancy and therefore can prevent deadlocks.
- Use raw_ variants of local_irq_disable to avoid irq debugging.
- When the lock is contended, spin at low SMT priority, using
  loads only, and with interrupts enabled (where possible).

Some stalls have been noticed at high loads that go away with improved
locking. There should not be so much locking contention in the first
place (which is addressed in a subsequent patch), but locking should
still be improved.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/watchdog.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index b67f8b03a32d..fda4d044d326 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -71,15 +71,20 @@ static inline void wd_smp_lock(unsigned long *flags)
 	 * This may be called from low level interrupt handlers at some
 	 * point in future.
 	 */
-	local_irq_save(*flags);
-	while (unlikely(test_and_set_bit_lock(0, &__wd_smp_lock)))
-		cpu_relax();
+	raw_local_irq_save(*flags);
+	hard_irq_disable(); /* Make it soft-NMI safe */
+	while (unlikely(test_and_set_bit_lock(0, &__wd_smp_lock))) {
+		raw_local_irq_restore(*flags);
+		spin_until_cond(!test_bit(0, &__wd_smp_lock));
+		raw_local_irq_save(*flags);
+		hard_irq_disable();
+	}
 }
 
 static inline void wd_smp_unlock(unsigned long *flags)
 {
 	clear_bit_unlock(0, &__wd_smp_lock);
-	local_irq_restore(*flags);
+	raw_local_irq_restore(*flags);
 }
 
 static void wd_lockup_ipi(struct pt_regs *regs)
-- 
cgit v1.2.3-59-g8ed1b


From 26c5c6e129ee725f103938262a034861ada467ae Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Wed, 9 Aug 2017 22:41:23 +1000
Subject: powerpc/watchdog: Moderate touch_nmi_watchdog overhead

Some code can go into a tight loop calling touch_nmi_watchdog (e.g.,
stop_machine CPU hotplug code). This can cause contention on watchdog
locks particularly if all CPUs with watchdog enabled are spinning in
the loops.

Avoid this storm of activity by running the watchdog timer callback
from this path if we have exceeded the timer period since it was last
run.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/watchdog.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index fda4d044d326..426dd34891d6 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -263,9 +263,11 @@ static void wd_timer_fn(unsigned long data)
 
 void arch_touch_nmi_watchdog(void)
 {
+	unsigned long ticks = tb_ticks_per_usec * wd_timer_period_ms * 1000;
 	int cpu = smp_processor_id();
 
-	watchdog_timer_interrupt(cpu);
+	if (get_tb() - per_cpu(wd_timer_tb, cpu) >= ticks)
+		watchdog_timer_interrupt(cpu);
 }
 EXPORT_SYMBOL(arch_touch_nmi_watchdog);
 
-- 
cgit v1.2.3-59-g8ed1b


From 8e23692175ad465628b8c86c1acc154fecad97be Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Wed, 9 Aug 2017 22:41:24 +1000
Subject: powerpc/watchdog: Fix final-check recovered case

When the watchdog decides to panic, it takes the lock and double
checks everything (to avoid races with the CPU being unstuck or
panic()ed by something else).

The exit label was misplaced and would result in all-CPUs backtrace
and watchdog panic even in the case that the condition was found to be
resolved.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/watchdog.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index 426dd34891d6..7d16dafa1bb6 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -144,7 +144,6 @@ static void watchdog_smp_panic(int cpu, u64 tb)
 	for_each_cpu(c, &wd_smp_cpus_pending)
 		set_cpu_stuck(c, tb);
 
-out:
 	wd_smp_unlock(&flags);
 
 	printk_safe_flush();
@@ -157,6 +156,11 @@ out:
 
 	if (hardlockup_panic)
 		nmi_panic(NULL, "Hard LOCKUP");
+
+	return;
+
+out:
+	wd_smp_unlock(&flags);
 }
 
 static void wd_smp_clear_cpu_pending(int cpu, u64 tb)
-- 
cgit v1.2.3-59-g8ed1b


From 87607a30be92f1ecee3af6f4a5779e179db98118 Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Wed, 9 Aug 2017 22:41:25 +1000
Subject: powerpc/watchdog: Fix marking of stuck CPUs

When the SMP detector finds other CPUs stuck, it iterates over
them and marks them as stuck. This pulls them out of the pending
mask and allows the detector to continue with remaining good
CPUs (if nmi_watchdog=panic is not enabled).

The code to dothat was buggy because when setting a CPU stuck,
if the pending mask became empty, it resets it to keep the
watchdog running. However the iterator will continue to run
over the new pending mask and mark remaining good CPUs sas stuck.

Fix this by doing it with cpumask bitwise operations.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/watchdog.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index 7d16dafa1bb6..12e90ae712fe 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -101,10 +101,10 @@ static void wd_lockup_ipi(struct pt_regs *regs)
 		nmi_panic(regs, "Hard LOCKUP");
 }
 
-static void set_cpu_stuck(int cpu, u64 tb)
+static void set_cpumask_stuck(const struct cpumask *cpumask, u64 tb)
 {
-	cpumask_set_cpu(cpu, &wd_smp_cpus_stuck);
-	cpumask_clear_cpu(cpu, &wd_smp_cpus_pending);
+	cpumask_or(&wd_smp_cpus_stuck, &wd_smp_cpus_stuck, cpumask);
+	cpumask_andnot(&wd_smp_cpus_pending, &wd_smp_cpus_pending, cpumask);
 	if (cpumask_empty(&wd_smp_cpus_pending)) {
 		wd_smp_last_reset_tb = tb;
 		cpumask_andnot(&wd_smp_cpus_pending,
@@ -112,6 +112,10 @@ static void set_cpu_stuck(int cpu, u64 tb)
 				&wd_smp_cpus_stuck);
 	}
 }
+static void set_cpu_stuck(int cpu, u64 tb)
+{
+	set_cpumask_stuck(cpumask_of(cpu), tb);
+}
 
 static void watchdog_smp_panic(int cpu, u64 tb)
 {
@@ -140,9 +144,8 @@ static void watchdog_smp_panic(int cpu, u64 tb)
 	}
 	smp_flush_nmi_ipi(1000000);
 
-	/* Take the stuck CPU out of the watch group */
-	for_each_cpu(c, &wd_smp_cpus_pending)
-		set_cpu_stuck(c, tb);
+	/* Take the stuck CPUs out of the watch group */
+	set_cpumask_stuck(&wd_smp_cpus_pending, tb);
 
 	wd_smp_unlock(&flags);
 
-- 
cgit v1.2.3-59-g8ed1b


From 96ea91e7b6ee2c406598d859e7348b4829404eea Mon Sep 17 00:00:00 2001
From: Nicholas Piggin <npiggin@gmail.com>
Date: Wed, 9 Aug 2017 22:41:26 +1000
Subject: powerpc/watchdog: add locking around init/exit functions

When CPUs start and stop the watchdog, they manipulate shared data
that is normally protected by the lock. Other CPUs can be running
concurrently at this time, so it's a good idea to use locking here
to be on the safe side.

Remove the barrier which is undocumented and didn't do anything.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/watchdog.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index 12e90ae712fe..34721a257a77 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -297,6 +297,8 @@ static void stop_watchdog_timer_on(unsigned int cpu)
 
 static int start_wd_on_cpu(unsigned int cpu)
 {
+	unsigned long flags;
+
 	if (cpumask_test_cpu(cpu, &wd_cpus_enabled)) {
 		WARN_ON(1);
 		return 0;
@@ -311,12 +313,14 @@ static int start_wd_on_cpu(unsigned int cpu)
 	if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
 		return 0;
 
+	wd_smp_lock(&flags);
 	cpumask_set_cpu(cpu, &wd_cpus_enabled);
 	if (cpumask_weight(&wd_cpus_enabled) == 1) {
 		cpumask_set_cpu(cpu, &wd_smp_cpus_pending);
 		wd_smp_last_reset_tb = get_tb();
 	}
-	smp_wmb();
+	wd_smp_unlock(&flags);
+
 	start_watchdog_timer_on(cpu);
 
 	return 0;
@@ -324,12 +328,17 @@ static int start_wd_on_cpu(unsigned int cpu)
 
 static int stop_wd_on_cpu(unsigned int cpu)
 {
+	unsigned long flags;
+
 	if (!cpumask_test_cpu(cpu, &wd_cpus_enabled))
 		return 0; /* Can happen in CPU unplug case */
 
 	stop_watchdog_timer_on(cpu);
 
+	wd_smp_lock(&flags);
 	cpumask_clear_cpu(cpu, &wd_cpus_enabled);
+	wd_smp_unlock(&flags);
+
 	wd_smp_clear_cpu_pending(cpu, get_tb());
 
 	return 0;
-- 
cgit v1.2.3-59-g8ed1b


From 5a69aec945d27e78abac9fd032533d3aaebf7c1e Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 16 Aug 2017 16:01:14 +1000
Subject: powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC

VSX uses a combination of the old vector registers, the old FP
registers and new "second halves" of the FP registers.

Thus when we need to see the VSX state in the thread struct
(flush_vsx_to_thread()) or when we'll use the VSX in the kernel
(enable_kernel_vsx()) we need to ensure they are all flushed into
the thread struct if either of them is individually enabled.

Unfortunately we only tested if the whole VSX was enabled, not if they
were individually enabled.

Fixes: 72cd7b44bc99 ("powerpc: Uncomment and make enable_kernel_vsx() routine available")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/process.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index ec480966f9bf..1f0fd361e09b 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -362,7 +362,8 @@ void enable_kernel_vsx(void)
 
 	cpumsr = msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX);
 
-	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX)) {
+	if (current->thread.regs &&
+	    (current->thread.regs->msr & (MSR_VSX|MSR_VEC|MSR_FP))) {
 		check_if_tm_restore_required(current);
 		/*
 		 * If a thread has already been reclaimed then the
@@ -386,7 +387,7 @@ void flush_vsx_to_thread(struct task_struct *tsk)
 {
 	if (tsk->thread.regs) {
 		preempt_disable();
-		if (tsk->thread.regs->msr & MSR_VSX) {
+		if (tsk->thread.regs->msr & (MSR_VSX|MSR_VEC|MSR_FP)) {
 			BUG_ON(tsk != current);
 			giveup_vsx(tsk);
 		}
-- 
cgit v1.2.3-59-g8ed1b


From 1a92a80ad386a1a6e3b36d576d52a1a456394b70 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 24 Jul 2017 14:28:00 +1000
Subject: powerpc/mm: Ensure cpumask update is ordered

There is no guarantee that the various isync's involved with
the context switch will order the update of the CPU mask with
the first TLB entry for the new context being loaded by the HW.

Be safe here and add a memory barrier to order any subsequent
load/store which may bring entries into the TLB.

The corresponding barrier on the other side already exists as
pte updates use pte_xchg() which uses __cmpxchg_u64 which has
a sync after the atomic operation.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add comments in the code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/include/asm/mmu_context.h      | 18 ++++++++++++++++++
 arch/powerpc/include/asm/pgtable-be-types.h |  1 +
 arch/powerpc/include/asm/pgtable-types.h    |  1 +
 3 files changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 0c76675394c5..35bec1c5bd5a 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -90,6 +90,24 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev,
 	/* Mark this context has been used on the new CPU */
 	if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next))) {
 		cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
+
+		/*
+		 * This full barrier orders the store to the cpumask above vs
+		 * a subsequent operation which allows this CPU to begin loading
+		 * translations for next.
+		 *
+		 * When using the radix MMU that operation is the load of the
+		 * MMU context id, which is then moved to SPRN_PID.
+		 *
+		 * For the hash MMU it is either the first load from slb_cache
+		 * in switch_slb(), and/or the store of paca->mm_ctx_id in
+		 * copy_mm_to_paca().
+		 *
+		 * On the read side the barrier is in pte_xchg(), which orders
+		 * the store to the PTE vs the load of mm_cpumask.
+		 */
+		smp_mb();
+
 		new_on_cpu = true;
 	}
 
diff --git a/arch/powerpc/include/asm/pgtable-be-types.h b/arch/powerpc/include/asm/pgtable-be-types.h
index 9c0f5db5cf46..67e7e3d990f4 100644
--- a/arch/powerpc/include/asm/pgtable-be-types.h
+++ b/arch/powerpc/include/asm/pgtable-be-types.h
@@ -87,6 +87,7 @@ static inline bool pte_xchg(pte_t *ptep, pte_t old, pte_t new)
 	unsigned long *p = (unsigned long *)ptep;
 	__be64 prev;
 
+	/* See comment in switch_mm_irqs_off() */
 	prev = (__force __be64)__cmpxchg_u64(p, (__force unsigned long)pte_raw(old),
 					     (__force unsigned long)pte_raw(new));
 
diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h
index 8bd3b13fe2fb..369a164b545c 100644
--- a/arch/powerpc/include/asm/pgtable-types.h
+++ b/arch/powerpc/include/asm/pgtable-types.h
@@ -62,6 +62,7 @@ static inline bool pte_xchg(pte_t *ptep, pte_t old, pte_t new)
 {
 	unsigned long *p = (unsigned long *)ptep;
 
+	/* See comment in switch_mm_irqs_off() */
 	return pte_val(old) == __cmpxchg_u64(p, pte_val(old), pte_val(new));
 }
 #endif
-- 
cgit v1.2.3-59-g8ed1b