From 342e3ce0f6f4691b31b1c7c9c3ae37160c4a82d2 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 23 Nov 2021 21:27:21 +0200 Subject: ARM: pxa/lubbock: Replace custom ->cs_control() by GPIO lookup table SPI PXA2xx driver supports GPIO chipselect by querying for known GPIO connection ID. Replace custom ->cs_control() by GPIO table, so the driver will use generic approach on this platform. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211123192723.44537-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- arch/arm/mach-pxa/lubbock.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 742d18a1f7dc..e2411971422d 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -211,16 +211,17 @@ static struct ads7846_platform_data ads_info = { // .y_plate_ohms = 500, /* GUESS! */ }; -static void ads7846_cs(u32 command) -{ - static const unsigned TS_nCS = 1 << 11; - lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS); -} +static struct gpiod_lookup_table ads7846_cs_gpios = { + .dev_id = "ads7846", + .table = { + GPIO_LOOKUP("lubbock", 11, "cs", GPIO_ACTIVE_LOW), + {} + }, +}; static struct pxa2xx_spi_chip ads_hw = { .tx_threshold = 1, .rx_threshold = 2, - .cs_control = ads7846_cs, }; static struct spi_board_info spi_board_info[] __initdata = { { @@ -512,6 +513,8 @@ static void __init lubbock_init(void) lubbock_flash_data[flashboot].name = "boot-rom"; (void) platform_add_devices(devices, ARRAY_SIZE(devices)); + gpiod_add_lookup_table(&ads7846_cs_gpios); + pxa2xx_set_spi_info(1, &pxa_ssp_master_info); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); } -- cgit v1.2.3-59-g8ed1b From a9c8f68ce2c37ced2f7a8667eda71b7753ede398 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 23 Nov 2021 21:27:22 +0200 Subject: spi: pxa2xx: Get rid of unused ->cs_control() Since the last user of the custom ->cs_control() gone, we may get rid of this legacy API completely. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211123192723.44537-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown --- Documentation/spi/pxa2xx.rst | 29 +++-------------------------- arch/arm/mach-pxa/stargate2.c | 2 +- drivers/spi/spi-pxa2xx.c | 18 ------------------ drivers/spi/spi-pxa2xx.h | 3 --- include/linux/spi/pxa2xx_spi.h | 4 ---- 5 files changed, 4 insertions(+), 52 deletions(-) (limited to 'arch') diff --git a/Documentation/spi/pxa2xx.rst b/Documentation/spi/pxa2xx.rst index 6312968acfe9..dfc7673ed15d 100644 --- a/Documentation/spi/pxa2xx.rst +++ b/Documentation/spi/pxa2xx.rst @@ -102,7 +102,7 @@ device. All fields are optional. u8 dma_burst_size; u32 timeout; u8 enable_loopback; - void (*cs_control)(u32 command); + int gpio_cs; }; The "pxa2xx_spi_chip.tx_threshold" and "pxa2xx_spi_chip.rx_threshold" fields are @@ -133,11 +133,6 @@ into internal loopback mode. In this mode the SSP controller internally connects the SSPTX pin to the SSPRX pin. This is useful for initial setup testing. -The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific -function for asserting/deasserting a slave device chip select. If the field is -NULL, the pxa2xx_spi master controller driver assumes that the SSP port is -configured to use GPIO or SSPFRM instead. - NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the chipselect is dropped after each spi_transfer. Most devices need chip select asserted around the complete message. Use SSPFRM as a GPIO (through a descriptor) @@ -152,30 +147,12 @@ field. Below is a sample configuration using the PXA255 NSSP. :: - /* Chip Select control for the CS8415A SPI slave device */ - static void cs8415a_cs_control(u32 command) - { - if (command & PXA2XX_CS_ASSERT) - GPCR(2) = GPIO_bit(2); - else - GPSR(2) = GPIO_bit(2); - } - - /* Chip Select control for the CS8405A SPI slave device */ - static void cs8405a_cs_control(u32 command) - { - if (command & PXA2XX_CS_ASSERT) - GPCR(3) = GPIO_bit(3); - else - GPSR(3) = GPIO_bit(3); - } - static struct pxa2xx_spi_chip cs8415a_chip_info = { .tx_threshold = 8, /* SSP hardward FIFO threshold */ .rx_threshold = 8, /* SSP hardward FIFO threshold */ .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ .timeout = 235, /* See Intel documentation */ - .cs_control = cs8415a_cs_control, /* Use external chip select */ + .gpio_cs = 2, /* Use external chip select */ }; static struct pxa2xx_spi_chip cs8405a_chip_info = { @@ -183,7 +160,7 @@ field. Below is a sample configuration using the PXA255 NSSP. .rx_threshold = 8, /* SSP hardward FIFO threshold */ .dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */ .timeout = 235, /* See Intel documentation */ - .cs_control = cs8405a_cs_control, /* Use external chip select */ + .gpio_cs = 3, /* Use external chip select */ }; static struct spi_board_info streetracer_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 7ad627465768..8ca02ec1d44c 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -347,7 +347,7 @@ static struct pxa2xx_spi_controller pxa_ssp_master_2_info = { }; /* An upcoming kernel change will scrap SFRM usage so these - * drivers have been moved to use gpio's via cs_control */ + * drivers have been moved to use GPIOs */ static struct pxa2xx_spi_chip staccel_chip_info = { .tx_threshold = 8, .rx_threshold = 8, diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index ee3297dd532e..24196156c609 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -427,7 +427,6 @@ static void lpss_ssp_cs_control(struct spi_device *spi, bool enable) static void cs_assert(struct spi_device *spi) { - struct chip_data *chip = spi_get_ctldata(spi); struct driver_data *drv_data = spi_controller_get_devdata(spi->controller); @@ -436,18 +435,12 @@ static void cs_assert(struct spi_device *spi) return; } - if (chip->cs_control) { - chip->cs_control(PXA2XX_CS_ASSERT); - return; - } - if (is_lpss_ssp(drv_data)) lpss_ssp_cs_control(spi, true); } static void cs_deassert(struct spi_device *spi) { - struct chip_data *chip = spi_get_ctldata(spi); struct driver_data *drv_data = spi_controller_get_devdata(spi->controller); unsigned long timeout; @@ -461,11 +454,6 @@ static void cs_deassert(struct spi_device *spi) !time_after(jiffies, timeout)) cpu_relax(); - if (chip->cs_control) { - chip->cs_control(PXA2XX_CS_DEASSERT); - return; - } - if (is_lpss_ssp(drv_data)) lpss_ssp_cs_control(spi, false); } @@ -1204,12 +1192,6 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip, */ cleanup_cs(spi); - /* If ->cs_control() is provided, ignore GPIO chip select */ - if (chip_info->cs_control) { - chip->cs_control = chip_info->cs_control; - return 0; - } - if (gpio_is_valid(chip_info->gpio_cs)) { int gpio = chip_info->gpio_cs; int err; diff --git a/drivers/spi/spi-pxa2xx.h b/drivers/spi/spi-pxa2xx.h index 4d77f4de6eda..45cdbbc71c4b 100644 --- a/drivers/spi/spi-pxa2xx.h +++ b/drivers/spi/spi-pxa2xx.h @@ -49,7 +49,6 @@ struct driver_data { int (*write)(struct driver_data *drv_data); int (*read)(struct driver_data *drv_data); irqreturn_t (*transfer_handler)(struct driver_data *drv_data); - void (*cs_control)(u32 command); void __iomem *lpss_base; @@ -67,8 +66,6 @@ struct chip_data { u32 threshold; u16 lpss_rx_threshold; u16 lpss_tx_threshold; - - void (*cs_control)(u32 command); }; static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, u32 reg) diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index eaab121ee575..42e06bfbc2a4 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -9,9 +9,6 @@ #include -#define PXA2XX_CS_ASSERT (0x01) -#define PXA2XX_CS_DEASSERT (0x02) - struct dma_chan; /* @@ -47,7 +44,6 @@ struct pxa2xx_spi_chip { u32 timeout; u8 enable_loopback; int gpio_cs; - void (*cs_control)(u32 command); }; #if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP) -- cgit v1.2.3-59-g8ed1b