From 8b614aebecdf2b1f72d51b1527f5a75d218b78e2 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 17 Dec 2015 23:51:54 +0100 Subject: bpf: move clearing of A/X into classic to eBPF migration prologue Back in the days where eBPF (or back then "internal BPF" ;->) was not exposed to user space, and only the classic BPF programs internally translated into eBPF programs, we missed the fact that for classic BPF A and X needed to be cleared. It was fixed back then via 83d5b7ef99c9 ("net: filter: initialize A and X registers"), and thus classic BPF specifics were added to the eBPF interpreter core to work around it. This added some confusion for JIT developers later on that take the eBPF interpreter code as an example for deriving their JIT. F.e. in f75298f5c3fe ("s390/bpf: clear correct BPF accumulator register"), at least X could leak stack memory. Furthermore, since this is only needed for classic BPF translations and not for eBPF (verifier takes care that read access to regs cannot be done uninitialized), more complexity is added to JITs as they need to determine whether they deal with migrations or native eBPF where they can just omit clearing A/X in their prologue and thus reduce image size a bit, see f.e. cde66c2d88da ("s390/bpf: Only clear A and X for converted BPF programs"). In other cases (x86, arm64), A and X is being cleared in the prologue also for eBPF case, which is unnecessary. Lets move this into the BPF migration in bpf_convert_filter() where it actually belongs as long as the number of eBPF JITs are still few. It can thus be done generically; allowing us to remove the quirk from __bpf_prog_run() and to slightly reduce JIT image size in case of eBPF, while reducing code duplication on this matter in current(/future) eBPF JITs. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Reviewed-by: Michael Holzheu Tested-by: Michael Holzheu Cc: Zi Shen Lim Cc: Yang Shi Acked-by: Yang Shi Acked-by: Zi Shen Lim Signed-off-by: David S. Miller --- arch/arm64/net/bpf_jit_comp.c | 6 ------ arch/s390/net/bpf_jit_comp.c | 13 ++----------- arch/x86/net/bpf_jit_comp.c | 14 +++++++++----- 3 files changed, 11 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c index b162ad70effc..7658612d915c 100644 --- a/arch/arm64/net/bpf_jit_comp.c +++ b/arch/arm64/net/bpf_jit_comp.c @@ -152,8 +152,6 @@ static void build_prologue(struct jit_ctx *ctx) const u8 r8 = bpf2a64[BPF_REG_8]; const u8 r9 = bpf2a64[BPF_REG_9]; const u8 fp = bpf2a64[BPF_REG_FP]; - const u8 ra = bpf2a64[BPF_REG_A]; - const u8 rx = bpf2a64[BPF_REG_X]; const u8 tmp1 = bpf2a64[TMP_REG_1]; const u8 tmp2 = bpf2a64[TMP_REG_2]; @@ -200,10 +198,6 @@ static void build_prologue(struct jit_ctx *ctx) /* Set up function call stack */ emit(A64_SUB_I(1, A64_SP, A64_SP, STACK_SIZE), ctx); - - /* Clear registers A and X */ - emit_a64_mov_i64(ra, 0, ctx); - emit_a64_mov_i64(rx, 0, ctx); } static void build_epilogue(struct jit_ctx *ctx) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 9a0c4c22e536..3c0bfc1f2694 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -408,7 +408,7 @@ static void emit_load_skb_data_hlen(struct bpf_jit *jit) * Save registers and create stack frame if necessary. * See stack frame layout desription in "bpf_jit.h"! */ -static void bpf_jit_prologue(struct bpf_jit *jit, bool is_classic) +static void bpf_jit_prologue(struct bpf_jit *jit) { if (jit->seen & SEEN_TAIL_CALL) { /* xc STK_OFF_TCCNT(4,%r15),STK_OFF_TCCNT(%r15) */ @@ -448,15 +448,6 @@ static void bpf_jit_prologue(struct bpf_jit *jit, bool is_classic) /* stg %b1,ST_OFF_SKBP(%r0,%r15) */ EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15, STK_OFF_SKBP); - /* Clear A (%b0) and X (%b7) registers for converted BPF programs */ - if (is_classic) { - if (REG_SEEN(BPF_REG_A)) - /* lghi %ba,0 */ - EMIT4_IMM(0xa7090000, BPF_REG_A, 0); - if (REG_SEEN(BPF_REG_X)) - /* lghi %bx,0 */ - EMIT4_IMM(0xa7090000, BPF_REG_X, 0); - } } /* @@ -1245,7 +1236,7 @@ static int bpf_jit_prog(struct bpf_jit *jit, struct bpf_prog *fp) jit->lit = jit->lit_start; jit->prg = 0; - bpf_jit_prologue(jit, bpf_prog_was_classic(fp)); + bpf_jit_prologue(jit); for (i = 0; i < fp->len; i += insn_count) { insn_count = bpf_jit_insn(jit, fp, i); if (insn_count < 0) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 75991979f667..c080e812ce85 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -193,7 +193,7 @@ struct jit_context { 32 /* space for rbx, r13, r14, r15 */ + \ 8 /* space for skb_copy_bits() buffer */) -#define PROLOGUE_SIZE 51 +#define PROLOGUE_SIZE 48 /* emit x64 prologue code for BPF program and check it's size. * bpf_tail_call helper will skip it while jumping into another program @@ -229,11 +229,15 @@ static void emit_prologue(u8 **pprog) /* mov qword ptr [rbp-X],r15 */ EMIT3_off32(0x4C, 0x89, 0xBD, -STACKSIZE + 24); - /* clear A and X registers */ - EMIT2(0x31, 0xc0); /* xor eax, eax */ - EMIT3(0x4D, 0x31, 0xED); /* xor r13, r13 */ + /* Clear the tail call counter (tail_call_cnt): for eBPF tail calls + * we need to reset the counter to 0. It's done in two instructions, + * resetting rax register to 0 (xor on eax gets 0 extended), and + * moving it to the counter location. + */ - /* clear tail_cnt: mov qword ptr [rbp-X], rax */ + /* xor eax, eax */ + EMIT2(0x31, 0xc0); + /* mov qword ptr [rbp-X], rax */ EMIT3_off32(0x48, 0x89, 0x85, -STACKSIZE + 32); BUILD_BUG_ON(cnt != PROLOGUE_SIZE); -- cgit v1.2.3-59-g8ed1b