From bca6b067b0b269a7b8ba129e2a918309ca8b4a55 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Wed, 26 Sep 2018 14:01:03 -0700 Subject: block: Move power management code into a new source file Move the code for runtime power management from blk-core.c into the new source file blk-pm.c. Move the corresponding declarations from into . For CONFIG_PM=n, leave out the declarations of the functions that are not used in that mode. This patch not only reduces the number of #ifdefs in the block layer core code but also reduces the size of header file and hence should help to reduce the build time of the Linux kernel if CONFIG_PM is not defined. Signed-off-by: Bart Van Assche Reviewed-by: Ming Lei Reviewed-by: Christoph Hellwig Cc: Jianchao Wang Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: Alan Stern Signed-off-by: Jens Axboe --- block/Kconfig | 3 + block/Makefile | 1 + block/blk-core.c | 196 +------------------------------------------------------ block/blk-pm.c | 188 ++++++++++++++++++++++++++++++++++++++++++++++++++++ block/blk-pm.h | 43 ++++++++++++ block/elevator.c | 22 +------ 6 files changed, 237 insertions(+), 216 deletions(-) create mode 100644 block/blk-pm.c create mode 100644 block/blk-pm.h (limited to 'block') diff --git a/block/Kconfig b/block/Kconfig index 1f2469a0123c..85263e7bded6 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -228,4 +228,7 @@ config BLK_MQ_RDMA depends on BLOCK && INFINIBAND default y +config BLK_PM + def_bool BLOCK && PM + source block/Kconfig.iosched diff --git a/block/Makefile b/block/Makefile index 572b33f32c07..27eac600474f 100644 --- a/block/Makefile +++ b/block/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_BLK_WBT) += blk-wbt.o obj-$(CONFIG_BLK_DEBUG_FS) += blk-mq-debugfs.o obj-$(CONFIG_BLK_DEBUG_FS_ZONED)+= blk-mq-debugfs-zoned.o obj-$(CONFIG_BLK_SED_OPAL) += sed-opal.o +obj-$(CONFIG_BLK_PM) += blk-pm.o diff --git a/block/blk-core.c b/block/blk-core.c index 4dbc93f43b38..6d4dd176bd9d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -42,6 +42,7 @@ #include "blk.h" #include "blk-mq.h" #include "blk-mq-sched.h" +#include "blk-pm.h" #include "blk-rq-qos.h" #ifdef CONFIG_DEBUG_FS @@ -1726,16 +1727,6 @@ void part_round_stats(struct request_queue *q, int cpu, struct hd_struct *part) } EXPORT_SYMBOL_GPL(part_round_stats); -#ifdef CONFIG_PM -static void blk_pm_put_request(struct request *rq) -{ - if (rq->q->dev && !(rq->rq_flags & RQF_PM) && !--rq->q->nr_pending) - pm_runtime_mark_last_busy(rq->q->dev); -} -#else -static inline void blk_pm_put_request(struct request *rq) {} -#endif - void __blk_put_request(struct request_queue *q, struct request *req) { req_flags_t rq_flags = req->rq_flags; @@ -3757,191 +3748,6 @@ void blk_finish_plug(struct blk_plug *plug) } EXPORT_SYMBOL(blk_finish_plug); -#ifdef CONFIG_PM -/** - * blk_pm_runtime_init - Block layer runtime PM initialization routine - * @q: the queue of the device - * @dev: the device the queue belongs to - * - * Description: - * Initialize runtime-PM-related fields for @q and start auto suspend for - * @dev. Drivers that want to take advantage of request-based runtime PM - * should call this function after @dev has been initialized, and its - * request queue @q has been allocated, and runtime PM for it can not happen - * yet(either due to disabled/forbidden or its usage_count > 0). In most - * cases, driver should call this function before any I/O has taken place. - * - * This function takes care of setting up using auto suspend for the device, - * the autosuspend delay is set to -1 to make runtime suspend impossible - * until an updated value is either set by user or by driver. Drivers do - * not need to touch other autosuspend settings. - * - * The block layer runtime PM is request based, so only works for drivers - * that use request as their IO unit instead of those directly use bio's. - */ -void blk_pm_runtime_init(struct request_queue *q, struct device *dev) -{ - /* Don't enable runtime PM for blk-mq until it is ready */ - if (q->mq_ops) { - pm_runtime_disable(dev); - return; - } - - q->dev = dev; - q->rpm_status = RPM_ACTIVE; - pm_runtime_set_autosuspend_delay(q->dev, -1); - pm_runtime_use_autosuspend(q->dev); -} -EXPORT_SYMBOL(blk_pm_runtime_init); - -/** - * blk_pre_runtime_suspend - Pre runtime suspend check - * @q: the queue of the device - * - * Description: - * This function will check if runtime suspend is allowed for the device - * by examining if there are any requests pending in the queue. If there - * are requests pending, the device can not be runtime suspended; otherwise, - * the queue's status will be updated to SUSPENDING and the driver can - * proceed to suspend the device. - * - * For the not allowed case, we mark last busy for the device so that - * runtime PM core will try to autosuspend it some time later. - * - * This function should be called near the start of the device's - * runtime_suspend callback. - * - * Return: - * 0 - OK to runtime suspend the device - * -EBUSY - Device should not be runtime suspended - */ -int blk_pre_runtime_suspend(struct request_queue *q) -{ - int ret = 0; - - if (!q->dev) - return ret; - - spin_lock_irq(q->queue_lock); - if (q->nr_pending) { - ret = -EBUSY; - pm_runtime_mark_last_busy(q->dev); - } else { - q->rpm_status = RPM_SUSPENDING; - } - spin_unlock_irq(q->queue_lock); - return ret; -} -EXPORT_SYMBOL(blk_pre_runtime_suspend); - -/** - * blk_post_runtime_suspend - Post runtime suspend processing - * @q: the queue of the device - * @err: return value of the device's runtime_suspend function - * - * Description: - * Update the queue's runtime status according to the return value of the - * device's runtime suspend function and mark last busy for the device so - * that PM core will try to auto suspend the device at a later time. - * - * This function should be called near the end of the device's - * runtime_suspend callback. - */ -void blk_post_runtime_suspend(struct request_queue *q, int err) -{ - if (!q->dev) - return; - - spin_lock_irq(q->queue_lock); - if (!err) { - q->rpm_status = RPM_SUSPENDED; - } else { - q->rpm_status = RPM_ACTIVE; - pm_runtime_mark_last_busy(q->dev); - } - spin_unlock_irq(q->queue_lock); -} -EXPORT_SYMBOL(blk_post_runtime_suspend); - -/** - * blk_pre_runtime_resume - Pre runtime resume processing - * @q: the queue of the device - * - * Description: - * Update the queue's runtime status to RESUMING in preparation for the - * runtime resume of the device. - * - * This function should be called near the start of the device's - * runtime_resume callback. - */ -void blk_pre_runtime_resume(struct request_queue *q) -{ - if (!q->dev) - return; - - spin_lock_irq(q->queue_lock); - q->rpm_status = RPM_RESUMING; - spin_unlock_irq(q->queue_lock); -} -EXPORT_SYMBOL(blk_pre_runtime_resume); - -/** - * blk_post_runtime_resume - Post runtime resume processing - * @q: the queue of the device - * @err: return value of the device's runtime_resume function - * - * Description: - * Update the queue's runtime status according to the return value of the - * device's runtime_resume function. If it is successfully resumed, process - * the requests that are queued into the device's queue when it is resuming - * and then mark last busy and initiate autosuspend for it. - * - * This function should be called near the end of the device's - * runtime_resume callback. - */ -void blk_post_runtime_resume(struct request_queue *q, int err) -{ - if (!q->dev) - return; - - spin_lock_irq(q->queue_lock); - if (!err) { - q->rpm_status = RPM_ACTIVE; - __blk_run_queue(q); - pm_runtime_mark_last_busy(q->dev); - pm_request_autosuspend(q->dev); - } else { - q->rpm_status = RPM_SUSPENDED; - } - spin_unlock_irq(q->queue_lock); -} -EXPORT_SYMBOL(blk_post_runtime_resume); - -/** - * blk_set_runtime_active - Force runtime status of the queue to be active - * @q: the queue of the device - * - * If the device is left runtime suspended during system suspend the resume - * hook typically resumes the device and corrects runtime status - * accordingly. However, that does not affect the queue runtime PM status - * which is still "suspended". This prevents processing requests from the - * queue. - * - * This function can be used in driver's resume hook to correct queue - * runtime PM status and re-enable peeking requests from the queue. It - * should be called before first request is added to the queue. - */ -void blk_set_runtime_active(struct request_queue *q) -{ - spin_lock_irq(q->queue_lock); - q->rpm_status = RPM_ACTIVE; - pm_runtime_mark_last_busy(q->dev); - pm_request_autosuspend(q->dev); - spin_unlock_irq(q->queue_lock); -} -EXPORT_SYMBOL(blk_set_runtime_active); -#endif - int __init blk_dev_init(void) { BUILD_BUG_ON(REQ_OP_LAST >= (1 << REQ_OP_BITS)); diff --git a/block/blk-pm.c b/block/blk-pm.c new file mode 100644 index 000000000000..9b636960d285 --- /dev/null +++ b/block/blk-pm.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include + +/** + * blk_pm_runtime_init - Block layer runtime PM initialization routine + * @q: the queue of the device + * @dev: the device the queue belongs to + * + * Description: + * Initialize runtime-PM-related fields for @q and start auto suspend for + * @dev. Drivers that want to take advantage of request-based runtime PM + * should call this function after @dev has been initialized, and its + * request queue @q has been allocated, and runtime PM for it can not happen + * yet(either due to disabled/forbidden or its usage_count > 0). In most + * cases, driver should call this function before any I/O has taken place. + * + * This function takes care of setting up using auto suspend for the device, + * the autosuspend delay is set to -1 to make runtime suspend impossible + * until an updated value is either set by user or by driver. Drivers do + * not need to touch other autosuspend settings. + * + * The block layer runtime PM is request based, so only works for drivers + * that use request as their IO unit instead of those directly use bio's. + */ +void blk_pm_runtime_init(struct request_queue *q, struct device *dev) +{ + /* Don't enable runtime PM for blk-mq until it is ready */ + if (q->mq_ops) { + pm_runtime_disable(dev); + return; + } + + q->dev = dev; + q->rpm_status = RPM_ACTIVE; + pm_runtime_set_autosuspend_delay(q->dev, -1); + pm_runtime_use_autosuspend(q->dev); +} +EXPORT_SYMBOL(blk_pm_runtime_init); + +/** + * blk_pre_runtime_suspend - Pre runtime suspend check + * @q: the queue of the device + * + * Description: + * This function will check if runtime suspend is allowed for the device + * by examining if there are any requests pending in the queue. If there + * are requests pending, the device can not be runtime suspended; otherwise, + * the queue's status will be updated to SUSPENDING and the driver can + * proceed to suspend the device. + * + * For the not allowed case, we mark last busy for the device so that + * runtime PM core will try to autosuspend it some time later. + * + * This function should be called near the start of the device's + * runtime_suspend callback. + * + * Return: + * 0 - OK to runtime suspend the device + * -EBUSY - Device should not be runtime suspended + */ +int blk_pre_runtime_suspend(struct request_queue *q) +{ + int ret = 0; + + if (!q->dev) + return ret; + + spin_lock_irq(q->queue_lock); + if (q->nr_pending) { + ret = -EBUSY; + pm_runtime_mark_last_busy(q->dev); + } else { + q->rpm_status = RPM_SUSPENDING; + } + spin_unlock_irq(q->queue_lock); + return ret; +} +EXPORT_SYMBOL(blk_pre_runtime_suspend); + +/** + * blk_post_runtime_suspend - Post runtime suspend processing + * @q: the queue of the device + * @err: return value of the device's runtime_suspend function + * + * Description: + * Update the queue's runtime status according to the return value of the + * device's runtime suspend function and mark last busy for the device so + * that PM core will try to auto suspend the device at a later time. + * + * This function should be called near the end of the device's + * runtime_suspend callback. + */ +void blk_post_runtime_suspend(struct request_queue *q, int err) +{ + if (!q->dev) + return; + + spin_lock_irq(q->queue_lock); + if (!err) { + q->rpm_status = RPM_SUSPENDED; + } else { + q->rpm_status = RPM_ACTIVE; + pm_runtime_mark_last_busy(q->dev); + } + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_post_runtime_suspend); + +/** + * blk_pre_runtime_resume - Pre runtime resume processing + * @q: the queue of the device + * + * Description: + * Update the queue's runtime status to RESUMING in preparation for the + * runtime resume of the device. + * + * This function should be called near the start of the device's + * runtime_resume callback. + */ +void blk_pre_runtime_resume(struct request_queue *q) +{ + if (!q->dev) + return; + + spin_lock_irq(q->queue_lock); + q->rpm_status = RPM_RESUMING; + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_pre_runtime_resume); + +/** + * blk_post_runtime_resume - Post runtime resume processing + * @q: the queue of the device + * @err: return value of the device's runtime_resume function + * + * Description: + * Update the queue's runtime status according to the return value of the + * device's runtime_resume function. If it is successfully resumed, process + * the requests that are queued into the device's queue when it is resuming + * and then mark last busy and initiate autosuspend for it. + * + * This function should be called near the end of the device's + * runtime_resume callback. + */ +void blk_post_runtime_resume(struct request_queue *q, int err) +{ + if (!q->dev) + return; + + spin_lock_irq(q->queue_lock); + if (!err) { + q->rpm_status = RPM_ACTIVE; + __blk_run_queue(q); + pm_runtime_mark_last_busy(q->dev); + pm_request_autosuspend(q->dev); + } else { + q->rpm_status = RPM_SUSPENDED; + } + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_post_runtime_resume); + +/** + * blk_set_runtime_active - Force runtime status of the queue to be active + * @q: the queue of the device + * + * If the device is left runtime suspended during system suspend the resume + * hook typically resumes the device and corrects runtime status + * accordingly. However, that does not affect the queue runtime PM status + * which is still "suspended". This prevents processing requests from the + * queue. + * + * This function can be used in driver's resume hook to correct queue + * runtime PM status and re-enable peeking requests from the queue. It + * should be called before first request is added to the queue. + */ +void blk_set_runtime_active(struct request_queue *q) +{ + spin_lock_irq(q->queue_lock); + q->rpm_status = RPM_ACTIVE; + pm_runtime_mark_last_busy(q->dev); + pm_request_autosuspend(q->dev); + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_set_runtime_active); diff --git a/block/blk-pm.h b/block/blk-pm.h new file mode 100644 index 000000000000..1ffc8ef203ec --- /dev/null +++ b/block/blk-pm.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _BLOCK_BLK_PM_H_ +#define _BLOCK_BLK_PM_H_ + +#include + +#ifdef CONFIG_PM +static inline void blk_pm_requeue_request(struct request *rq) +{ + if (rq->q->dev && !(rq->rq_flags & RQF_PM)) + rq->q->nr_pending--; +} + +static inline void blk_pm_add_request(struct request_queue *q, + struct request *rq) +{ + if (q->dev && !(rq->rq_flags & RQF_PM) && q->nr_pending++ == 0 && + (q->rpm_status == RPM_SUSPENDED || q->rpm_status == RPM_SUSPENDING)) + pm_request_resume(q->dev); +} + +static inline void blk_pm_put_request(struct request *rq) +{ + if (rq->q->dev && !(rq->rq_flags & RQF_PM) && !--rq->q->nr_pending) + pm_runtime_mark_last_busy(rq->q->dev); +} +#else +static inline void blk_pm_requeue_request(struct request *rq) +{ +} + +static inline void blk_pm_add_request(struct request_queue *q, + struct request *rq) +{ +} + +static inline void blk_pm_put_request(struct request *rq) +{ +} +#endif + +#endif /* _BLOCK_BLK_PM_H_ */ diff --git a/block/elevator.c b/block/elevator.c index 6a06b5d040e5..e18ac68626e3 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -41,6 +41,7 @@ #include "blk.h" #include "blk-mq-sched.h" +#include "blk-pm.h" #include "blk-wbt.h" static DEFINE_SPINLOCK(elv_list_lock); @@ -557,27 +558,6 @@ void elv_bio_merged(struct request_queue *q, struct request *rq, e->type->ops.sq.elevator_bio_merged_fn(q, rq, bio); } -#ifdef CONFIG_PM -static void blk_pm_requeue_request(struct request *rq) -{ - if (rq->q->dev && !(rq->rq_flags & RQF_PM)) - rq->q->nr_pending--; -} - -static void blk_pm_add_request(struct request_queue *q, struct request *rq) -{ - if (q->dev && !(rq->rq_flags & RQF_PM) && q->nr_pending++ == 0 && - (q->rpm_status == RPM_SUSPENDED || q->rpm_status == RPM_SUSPENDING)) - pm_request_resume(q->dev); -} -#else -static inline void blk_pm_requeue_request(struct request *rq) {} -static inline void blk_pm_add_request(struct request_queue *q, - struct request *rq) -{ -} -#endif - void elv_requeue_request(struct request_queue *q, struct request *rq) { /* -- cgit v1.2.3-59-g8ed1b