From 8b3444852a2b58129ee68a8dd69fef81ceb902a1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 3 Mar 2015 22:41:21 +0200 Subject: sata_dwc_460ex: move to generic DMA driver The SATA implementation based on two actually different devices, i.e. SATA and DMA controllers. For Synopsys DesignWare DMA we have already a generic implementation of the driver. Thus, the patch converts the code to use DMAEngine framework and dw_dmac driver. In future it will be better to split the devices inside DTS as well like it's done on other platforms. Signed-off-by: Andy Shevchenko Signed-off-by: Tejun Heo --- drivers/ata/sata_dwc_460ex.c | 736 +++++++------------------------------------ 1 file changed, 122 insertions(+), 614 deletions(-) (limited to 'drivers/ata/sata_dwc_460ex.c') diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index 7bc0c12882b9..08cd63fae7ef 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c @@ -36,11 +36,16 @@ #include #include #include + #include "libata.h" #include #include +/* Supported DMA engine drivers */ +#include +#include + /* These two are defined in "libata.h" */ #undef DRV_NAME #undef DRV_VERSION @@ -60,153 +65,9 @@ #define NO_IRQ 0 #endif -/* SATA DMA driver Globals */ -#define DMA_NUM_CHANS 1 -#define DMA_NUM_CHAN_REGS 8 - -/* SATA DMA Register definitions */ #define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/ -struct dmareg { - u32 low; /* Low bits 0-31 */ - u32 high; /* High bits 32-63 */ -}; - -/* DMA Per Channel registers */ -struct dma_chan_regs { - struct dmareg sar; /* Source Address */ - struct dmareg dar; /* Destination address */ - struct dmareg llp; /* Linked List Pointer */ - struct dmareg ctl; /* Control */ - struct dmareg sstat; /* Source Status not implemented in core */ - struct dmareg dstat; /* Destination Status not implemented in core*/ - struct dmareg sstatar; /* Source Status Address not impl in core */ - struct dmareg dstatar; /* Destination Status Address not implemente */ - struct dmareg cfg; /* Config */ - struct dmareg sgr; /* Source Gather */ - struct dmareg dsr; /* Destination Scatter */ -}; - -/* Generic Interrupt Registers */ -struct dma_interrupt_regs { - struct dmareg tfr; /* Transfer Interrupt */ - struct dmareg block; /* Block Interrupt */ - struct dmareg srctran; /* Source Transfer Interrupt */ - struct dmareg dsttran; /* Dest Transfer Interrupt */ - struct dmareg error; /* Error */ -}; - -struct ahb_dma_regs { - struct dma_chan_regs chan_regs[DMA_NUM_CHAN_REGS]; - struct dma_interrupt_regs interrupt_raw; /* Raw Interrupt */ - struct dma_interrupt_regs interrupt_status; /* Interrupt Status */ - struct dma_interrupt_regs interrupt_mask; /* Interrupt Mask */ - struct dma_interrupt_regs interrupt_clear; /* Interrupt Clear */ - struct dmareg statusInt; /* Interrupt combined*/ - struct dmareg rq_srcreg; /* Src Trans Req */ - struct dmareg rq_dstreg; /* Dst Trans Req */ - struct dmareg rq_sgl_srcreg; /* Sngl Src Trans Req*/ - struct dmareg rq_sgl_dstreg; /* Sngl Dst Trans Req*/ - struct dmareg rq_lst_srcreg; /* Last Src Trans Req*/ - struct dmareg rq_lst_dstreg; /* Last Dst Trans Req*/ - struct dmareg dma_cfg; /* DMA Config */ - struct dmareg dma_chan_en; /* DMA Channel Enable*/ - struct dmareg dma_id; /* DMA ID */ - struct dmareg dma_test; /* DMA Test */ - struct dmareg res1; /* reserved */ - struct dmareg res2; /* reserved */ - /* - * DMA Comp Params - * Param 6 = dma_param[0], Param 5 = dma_param[1], - * Param 4 = dma_param[2] ... - */ - struct dmareg dma_params[6]; -}; - -/* Data structure for linked list item */ -struct lli { - u32 sar; /* Source Address */ - u32 dar; /* Destination address */ - u32 llp; /* Linked List Pointer */ - struct dmareg ctl; /* Control */ - struct dmareg dstat; /* Destination Status */ -}; - -enum { - SATA_DWC_DMAC_LLI_SZ = (sizeof(struct lli)), - SATA_DWC_DMAC_LLI_NUM = 256, - SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \ - SATA_DWC_DMAC_LLI_NUM), - SATA_DWC_DMAC_TWIDTH_BYTES = 4, - SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \ - SATA_DWC_DMAC_TWIDTH_BYTES), -}; - -/* DMA Register Operation Bits */ enum { - DMA_EN = 0x00000001, /* Enable AHB DMA */ - DMA_CTL_LLP_SRCEN = 0x10000000, /* Blk chain enable Src */ - DMA_CTL_LLP_DSTEN = 0x08000000, /* Blk chain enable Dst */ -}; - -#define DMA_CTL_BLK_TS(size) ((size) & 0x000000FFF) /* Blk Transfer size */ -#define DMA_CHANNEL(ch) (0x00000001 << (ch)) /* Select channel */ - /* Enable channel */ -#define DMA_ENABLE_CHAN(ch) ((0x00000001 << (ch)) | \ - ((0x000000001 << (ch)) << 8)) - /* Disable channel */ -#define DMA_DISABLE_CHAN(ch) (0x00000000 | ((0x000000001 << (ch)) << 8)) - /* Transfer Type & Flow Controller */ -#define DMA_CTL_TTFC(type) (((type) & 0x7) << 20) -#define DMA_CTL_SMS(num) (((num) & 0x3) << 25) /* Src Master Select */ -#define DMA_CTL_DMS(num) (((num) & 0x3) << 23)/* Dst Master Select */ - /* Src Burst Transaction Length */ -#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14) - /* Dst Burst Transaction Length */ -#define DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11) - /* Source Transfer Width */ -#define DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4) - /* Destination Transfer Width */ -#define DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1) - -/* Assign HW handshaking interface (x) to destination / source peripheral */ -#define DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11) -#define DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7) -#define DMA_CFG_HW_CH_PRIOR(int_num) (((int_num) & 0xF) << 5) -#define DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master)) - -/* - * This define is used to set block chaining disabled in the control low - * register. It is already in little endian format so it can be &'d dirctly. - * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN)) - */ -enum { - DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7, - DMA_CTL_TTFC_P2M_DMAC = 0x00000002, /* Per to mem, DMAC cntr */ - DMA_CTL_TTFC_M2P_PER = 0x00000003, /* Mem to per, peripheral cntr */ - DMA_CTL_SINC_INC = 0x00000000, /* Source Address Increment */ - DMA_CTL_SINC_DEC = 0x00000200, - DMA_CTL_SINC_NOCHANGE = 0x00000400, - DMA_CTL_DINC_INC = 0x00000000, /* Destination Address Increment */ - DMA_CTL_DINC_DEC = 0x00000080, - DMA_CTL_DINC_NOCHANGE = 0x00000100, - DMA_CTL_INT_EN = 0x00000001, /* Interrupt Enable */ - -/* Channel Configuration Register high bits */ - DMA_CFG_FCMOD_REQ = 0x00000001, /* Flow Control - request based */ - DMA_CFG_PROTCTL = (0x00000003 << 2),/* Protection Control */ - -/* Channel Configuration Register low bits */ - DMA_CFG_RELD_DST = 0x80000000, /* Reload Dest / Src Addr */ - DMA_CFG_RELD_SRC = 0x40000000, - DMA_CFG_HS_SELSRC = 0x00000800, /* Software handshake Src/ Dest */ - DMA_CFG_HS_SELDST = 0x00000400, - DMA_CFG_FIFOEMPTY = (0x00000001 << 9), /* FIFO Empty bit */ - -/* Channel Linked List Pointer Register */ - DMA_LLP_AHBMASTER1 = 0, /* List Master Select */ - DMA_LLP_AHBMASTER2 = 1, - SATA_DWC_MAX_PORTS = 1, SATA_DWC_SCR_OFFSET = 0x24, @@ -287,7 +148,7 @@ struct sata_dwc_device { struct ata_host *host; u8 __iomem *reg_base; struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */ - int irq_dma; + struct dw_dma_chip *dma; }; #define SATA_DWC_QCMD_MAX 32 @@ -295,10 +156,13 @@ struct sata_dwc_device { struct sata_dwc_device_port { struct sata_dwc_device *hsdev; int cmd_issued[SATA_DWC_QCMD_MAX]; - struct lli *llit[SATA_DWC_QCMD_MAX]; /* DMA LLI table */ - dma_addr_t llit_dma[SATA_DWC_QCMD_MAX]; - u32 dma_chan[SATA_DWC_QCMD_MAX]; int dma_pending[SATA_DWC_QCMD_MAX]; + + /* DMA info */ + struct dw_dma_slave *dws; + struct dma_chan *chan; + struct dma_async_tx_descriptor *desc[SATA_DWC_QCMD_MAX]; + u32 dma_interrupt_count; }; /* @@ -330,14 +194,18 @@ struct sata_dwc_host_priv { void __iomem *scr_addr_sstatus; u32 sata_dwc_sactive_issued ; u32 sata_dwc_sactive_queued ; - u32 dma_interrupt_count; - struct ahb_dma_regs *sata_dma_regs; struct device *dwc_dev; - int dma_channel; }; static struct sata_dwc_host_priv host_pvt; +static struct dw_dma_slave sata_dwc_dma_dws = { + .src_id = 0, + .dst_id = 0, + .src_master = 0, + .dst_master = 1, +}; + /* * Prototypes */ @@ -347,12 +215,6 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc, static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status); static void sata_dwc_port_stop(struct ata_port *ap); static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag); -static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq); -static void dma_dwc_exit(struct sata_dwc_device *hsdev); -static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems, - struct lli *lli, dma_addr_t dma_lli, - void __iomem *addr, int dir); -static void dma_dwc_xfer_start(int dma_ch); static const char *get_prot_descript(u8 protocol) { @@ -405,76 +267,8 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf) tf->hob_lbah); } -/* - * Function: get_burst_length_encode - * arguments: datalength: length in bytes of data - * returns value to be programmed in register corresponding to data length - * This value is effectively the log(base 2) of the length - */ -static int get_burst_length_encode(int datalength) -{ - int items = datalength >> 2; /* div by 4 to get lword count */ - - if (items >= 64) - return 5; - - if (items >= 32) - return 4; - - if (items >= 16) - return 3; - - if (items >= 8) - return 2; - - if (items >= 4) - return 1; - - return 0; -} - -static void clear_chan_interrupts(int c) +static void dma_dwc_xfer_done(void *hsdev_instance) { - out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low), - DMA_CHANNEL(c)); - out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low), - DMA_CHANNEL(c)); - out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low), - DMA_CHANNEL(c)); - out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low), - DMA_CHANNEL(c)); - out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low), - DMA_CHANNEL(c)); -} - -/* - * Function: dma_request_channel - * arguments: None - * returns channel number if available else -1 - * This function assigns the next available DMA channel from the list to the - * requester - */ -static int dma_request_channel(void) -{ - /* Check if the channel is not currently in use */ - if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) & - DMA_CHANNEL(host_pvt.dma_channel))) - return host_pvt.dma_channel; - dev_err(host_pvt.dwc_dev, "%s Channel %d is currently in use\n", - __func__, host_pvt.dma_channel); - return -1; -} - -/* - * Function: dma_dwc_interrupt - * arguments: irq, dev_id, pt_regs - * returns channel number if available else -1 - * Interrupt Handler for DW AHB SATA DMA - */ -static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance) -{ - int chan; - u32 tfr_reg, err_reg; unsigned long flags; struct sata_dwc_device *hsdev = hsdev_instance; struct ata_host *host = (struct ata_host *)hsdev->host; @@ -488,341 +282,65 @@ static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance) hsdevp = HSDEVP_FROM_AP(ap); tag = ap->link.active_tag; - tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\ - .low)); - err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\ - .low)); - - dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n", - tfr_reg, err_reg, hsdevp->dma_pending[tag], port); - - chan = host_pvt.dma_channel; - if (chan >= 0) { - /* Check for end-of-transfer interrupt. */ - if (tfr_reg & DMA_CHANNEL(chan)) { - /* - * Each DMA command produces 2 interrupts. Only - * complete the command after both interrupts have been - * seen. (See sata_dwc_isr()) - */ - host_pvt.dma_interrupt_count++; - sata_dwc_clear_dmacr(hsdevp, tag); - - if (hsdevp->dma_pending[tag] == - SATA_DWC_DMA_PENDING_NONE) { - dev_err(ap->dev, "DMA not pending eot=0x%08x " - "err=0x%08x tag=0x%02x pending=%d\n", - tfr_reg, err_reg, tag, - hsdevp->dma_pending[tag]); - } - - if ((host_pvt.dma_interrupt_count % 2) == 0) - sata_dwc_dma_xfer_complete(ap, 1); - - /* Clear the interrupt */ - out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\ - .tfr.low), - DMA_CHANNEL(chan)); - } - - /* Check for error interrupt. */ - if (err_reg & DMA_CHANNEL(chan)) { - /* TODO Need error handler ! */ - dev_err(ap->dev, "error interrupt err_reg=0x%08x\n", - err_reg); - - /* Clear the interrupt. */ - out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\ - .error.low), - DMA_CHANNEL(chan)); - } - } - spin_unlock_irqrestore(&host->lock, flags); - return IRQ_HANDLED; -} - -/* - * Function: dma_request_interrupts - * arguments: hsdev - * returns status - * This function registers ISR for a particular DMA channel interrupt - */ -static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq) -{ - int retval = 0; - int chan = host_pvt.dma_channel; - - if (chan >= 0) { - /* Unmask error interrupt */ - out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low, - DMA_ENABLE_CHAN(chan)); - - /* Unmask end-of-transfer interrupt */ - out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low, - DMA_ENABLE_CHAN(chan)); - } - - retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev); - if (retval) { - dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n", - __func__, irq); - return -ENODEV; - } - - /* Mark this interrupt as requested */ - hsdev->irq_dma = irq; - return 0; -} - -/* - * Function: map_sg_to_lli - * The Synopsis driver has a comment proposing that better performance - * is possible by only enabling interrupts on the last item in the linked list. - * However, it seems that could be a problem if an error happened on one of the - * first items. The transfer would halt, but no error interrupt would occur. - * Currently this function sets interrupts enabled for each linked list item: - * DMA_CTL_INT_EN. - */ -static int map_sg_to_lli(struct scatterlist *sg, int num_elems, - struct lli *lli, dma_addr_t dma_lli, - void __iomem *dmadr_addr, int dir) -{ - int i, idx = 0; - int fis_len = 0; - dma_addr_t next_llp; - int bl; - int sms_val, dms_val; - - sms_val = 0; - dms_val = 1 + host_pvt.dma_channel; - dev_dbg(host_pvt.dwc_dev, - "%s: sg=%p nelem=%d lli=%p dma_lli=0x%pad dmadr=0x%p\n", - __func__, sg, num_elems, lli, &dma_lli, dmadr_addr); - - bl = get_burst_length_encode(AHB_DMA_BRST_DFLT); - - for (i = 0; i < num_elems; i++, sg++) { - u32 addr, offset; - u32 sg_len, len; - - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len" - "=%d\n", __func__, i, addr, sg_len); - - while (sg_len) { - if (idx >= SATA_DWC_DMAC_LLI_NUM) { - /* The LLI table is not large enough. */ - dev_err(host_pvt.dwc_dev, "LLI table overrun " - "(idx=%d)\n", idx); - break; - } - len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ? - SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len; - - offset = addr & 0xffff; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - /* - * Make sure a LLI block is not created that will span - * 8K max FIS boundary. If the block spans such a FIS - * boundary, there is a chance that a DMA burst will - * cross that boundary -- this results in an error in - * the host controller. - */ - if (fis_len + len > 8192) { - dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len=" - "%d(0x%x) len=%d(0x%x)\n", fis_len, - fis_len, len, len); - len = 8192 - fis_len; - fis_len = 0; - } else { - fis_len += len; - } - if (fis_len == 8192) - fis_len = 0; - - /* - * Set DMA addresses and lower half of control register - * based on direction. - */ - if (dir == DMA_FROM_DEVICE) { - lli[idx].dar = cpu_to_le32(addr); - lli[idx].sar = cpu_to_le32((u32)dmadr_addr); - - lli[idx].ctl.low = cpu_to_le32( - DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) | - DMA_CTL_SMS(sms_val) | - DMA_CTL_DMS(dms_val) | - DMA_CTL_SRC_MSIZE(bl) | - DMA_CTL_DST_MSIZE(bl) | - DMA_CTL_SINC_NOCHANGE | - DMA_CTL_SRC_TRWID(2) | - DMA_CTL_DST_TRWID(2) | - DMA_CTL_INT_EN | - DMA_CTL_LLP_SRCEN | - DMA_CTL_LLP_DSTEN); - } else { /* DMA_TO_DEVICE */ - lli[idx].sar = cpu_to_le32(addr); - lli[idx].dar = cpu_to_le32((u32)dmadr_addr); - - lli[idx].ctl.low = cpu_to_le32( - DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) | - DMA_CTL_SMS(dms_val) | - DMA_CTL_DMS(sms_val) | - DMA_CTL_SRC_MSIZE(bl) | - DMA_CTL_DST_MSIZE(bl) | - DMA_CTL_DINC_NOCHANGE | - DMA_CTL_SRC_TRWID(2) | - DMA_CTL_DST_TRWID(2) | - DMA_CTL_INT_EN | - DMA_CTL_LLP_SRCEN | - DMA_CTL_LLP_DSTEN); - } - - dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: " - "0x%08x val: 0x%08x\n", __func__, - len, DMA_CTL_BLK_TS(len / 4)); - - /* Program the LLI CTL high register */ - lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\ - (len / 4)); - - /* Program the next pointer. The next pointer must be - * the physical address, not the virtual address. - */ - next_llp = (dma_lli + ((idx + 1) * sizeof(struct \ - lli))); - - /* The last 2 bits encode the list master select. */ - next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2); - - lli[idx].llp = cpu_to_le32(next_llp); - idx++; - sg_len -= len; - addr += len; - } - } - /* - * The last next ptr has to be zero and the last control low register - * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source - * and destination enable) set back to 0 (disabled.) This is what tells - * the core that this is the last item in the linked list. + * Each DMA command produces 2 interrupts. Only + * complete the command after both interrupts have been + * seen. (See sata_dwc_isr()) */ - if (idx) { - lli[idx-1].llp = 0x00000000; - lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32; + hsdevp->dma_interrupt_count++; + sata_dwc_clear_dmacr(hsdevp, tag); - /* Flush cache to memory */ - dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx), - DMA_BIDIRECTIONAL); + if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) { + dev_err(ap->dev, "DMA not pending tag=0x%02x pending=%d\n", + tag, hsdevp->dma_pending[tag]); } - return idx; -} + if ((hsdevp->dma_interrupt_count % 2) == 0) + sata_dwc_dma_xfer_complete(ap, 1); -/* - * Function: dma_dwc_xfer_start - * arguments: Channel number - * Return : None - * Enables the DMA channel - */ -static void dma_dwc_xfer_start(int dma_ch) -{ - /* Enable the DMA channel */ - out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low), - in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) | - DMA_ENABLE_CHAN(dma_ch)); + spin_unlock_irqrestore(&host->lock, flags); } -static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems, - struct lli *lli, dma_addr_t dma_lli, - void __iomem *addr, int dir) +static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd *qc) { - int dma_ch; - int num_lli; - /* Acquire DMA channel */ - dma_ch = dma_request_channel(); - if (dma_ch == -1) { - dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n", - __func__); - return -EAGAIN; + struct ata_port *ap = qc->ap; + struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); + dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr; + struct dma_slave_config sconf; + struct dma_async_tx_descriptor *desc; + + if (qc->dma_dir == DMA_DEV_TO_MEM) { + sconf.src_addr = addr; + sconf.device_fc = true; + } else { /* DMA_MEM_TO_DEV */ + sconf.dst_addr = addr; + sconf.device_fc = false; } - /* Convert SG list to linked list of items (LLIs) for AHB DMA */ - num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir); - - dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:" - " 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems, - lli, (u32)dma_lli, addr, num_lli); - - clear_chan_interrupts(dma_ch); - - /* Program the CFG register. */ - out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high), - DMA_CFG_HW_HS_SRC(dma_ch) | DMA_CFG_HW_HS_DEST(dma_ch) | - DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ); - out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low), - DMA_CFG_HW_CH_PRIOR(dma_ch)); - - /* Program the address of the linked list */ - out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low), - DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2)); - - /* Program the CTL register with src enable / dst enable */ - out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low), - DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN); - return dma_ch; -} - -/* - * Function: dma_dwc_exit - * arguments: None - * returns status - * This function exits the SATA DMA driver - */ -static void dma_dwc_exit(struct sata_dwc_device *hsdev) -{ - dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__); - if (host_pvt.sata_dma_regs) { - iounmap((void __iomem *)host_pvt.sata_dma_regs); - host_pvt.sata_dma_regs = NULL; - } + sconf.direction = qc->dma_dir; + sconf.src_maxburst = AHB_DMA_BRST_DFLT; + sconf.dst_maxburst = AHB_DMA_BRST_DFLT; + sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - if (hsdev->irq_dma) { - free_irq(hsdev->irq_dma, hsdev); - hsdev->irq_dma = 0; - } -} + dmaengine_slave_config(hsdevp->chan, &sconf); -/* - * Function: dma_dwc_init - * arguments: hsdev - * returns status - * This function initializes the SATA DMA driver - */ -static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq) -{ - int err; + /* Convert SG list to linked list of items (LLIs) for AHB DMA */ + desc = dmaengine_prep_slave_sg(hsdevp->chan, qc->sg, qc->n_elem, + qc->dma_dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - err = dma_request_interrupts(hsdev, irq); - if (err) { - dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns" - " %d\n", __func__, err); - return err; - } + if (!desc) + return NULL; - /* Enabe DMA */ - out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN); + desc->callback = dma_dwc_xfer_done; + desc->callback_param = hsdev; - dev_notice(host_pvt.dwc_dev, "DMA initialized\n"); - dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\ - sata_dma_regs); + dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d addr: %pad\n", + __func__, qc->sg, qc->n_elem, &addr); - return 0; + return desc; } static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val) @@ -892,21 +410,18 @@ static void sata_dwc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc; u32 serror; u8 status, tag; - u32 err_reg; ata_ehi_clear_desc(ehi); serror = core_scr_read(SCR_ERROR); status = ap->ops->sff_check_status(ap); - err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\ - low)); tag = ap->link.active_tag; - dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x " - "dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n", - __func__, serror, intpr, status, host_pvt.dma_interrupt_count, - hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg); + dev_err(ap->dev, + "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x dma_intp=%d pending=%d issued=%d", + __func__, serror, intpr, status, hsdevp->dma_interrupt_count, + hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]); /* Clear error register and interrupt bit */ clear_serror(); @@ -1033,7 +548,7 @@ DRVSTILLBUSY: * operation done interrupt. The command should be * completed only after both interrupts are seen. */ - host_pvt.dma_interrupt_count++; + hsdevp->dma_interrupt_count++; if (hsdevp->dma_pending[tag] == \ SATA_DWC_DMA_PENDING_NONE) { dev_err(ap->dev, @@ -1042,7 +557,7 @@ DRVSTILLBUSY: hsdevp->dma_pending[tag]); } - if ((host_pvt.dma_interrupt_count % 2) == 0) + if ((hsdevp->dma_interrupt_count % 2) == 0) sata_dwc_dma_xfer_complete(ap, 1); } else if (ata_is_pio(qc->tf.protocol)) { ata_sff_hsm_move(ap, qc, status, 0); @@ -1116,12 +631,12 @@ DRVSTILLBUSY: dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__, get_prot_descript(qc->tf.protocol)); if (ata_is_dma(qc->tf.protocol)) { - host_pvt.dma_interrupt_count++; + hsdevp->dma_interrupt_count++; if (hsdevp->dma_pending[tag] == \ SATA_DWC_DMA_PENDING_NONE) dev_warn(ap->dev, "%s: DMA not pending?\n", __func__); - if ((host_pvt.dma_interrupt_count % 2) == 0) + if ((hsdevp->dma_interrupt_count % 2) == 0) sata_dwc_dma_xfer_complete(ap, 1); } else { if (unlikely(sata_dwc_qc_complete(ap, qc, 1))) @@ -1269,6 +784,18 @@ static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev) in_le32(&hsdev->sata_dwc_regs->errmr)); } +static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param) +{ + struct sata_dwc_device_port *hsdevp = param; + struct dw_dma_slave *dws = hsdevp->dws; + + if (dws->dma_dev != chan->device->dev) + return false; + + chan->private = dws; + return true; +} + static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base) { port->cmd_addr = (void __iomem *)base + 0x00; @@ -1303,6 +830,7 @@ static int sata_dwc_port_start(struct ata_port *ap) struct sata_dwc_device *hsdev; struct sata_dwc_device_port *hsdevp = NULL; struct device *pdev; + dma_cap_mask_t mask; int i; hsdev = HSDEV_FROM_AP(ap); @@ -1326,29 +854,27 @@ static int sata_dwc_port_start(struct ata_port *ap) } hsdevp->hsdev = hsdev; + hsdevp->dws = &sata_dwc_dma_dws; + hsdevp->dws->dma_dev = host_pvt.dwc_dev; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Acquire DMA channel */ + hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp); + if (!hsdevp->chan) { + dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n", + __func__); + err = -EAGAIN; + goto CLEANUP_ALLOC; + } + for (i = 0; i < SATA_DWC_QCMD_MAX; i++) hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT; ap->bmdma_prd = NULL; /* set these so libata doesn't use them */ ap->bmdma_prd_dma = 0; - /* - * DMA - Assign scatter gather LLI table. We can't use the libata - * version since it's PRD is IDE PCI specific. - */ - for (i = 0; i < SATA_DWC_QCMD_MAX; i++) { - hsdevp->llit[i] = dma_alloc_coherent(pdev, - SATA_DWC_DMAC_LLI_TBL_SZ, - &(hsdevp->llit_dma[i]), - GFP_ATOMIC); - if (!hsdevp->llit[i]) { - dev_err(ap->dev, "%s: dma_alloc_coherent failed\n", - __func__); - err = -ENOMEM; - goto CLEANUP_ALLOC; - } - } - if (ap->port_no == 0) { dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n", __func__); @@ -1377,22 +903,14 @@ CLEANUP: static void sata_dwc_port_stop(struct ata_port *ap) { - int i; - struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id); - if (hsdevp && hsdev) { - /* deallocate LLI table */ - for (i = 0; i < SATA_DWC_QCMD_MAX; i++) { - dma_free_coherent(ap->host->dev, - SATA_DWC_DMAC_LLI_TBL_SZ, - hsdevp->llit[i], hsdevp->llit_dma[i]); - } + dmaengine_terminate_all(hsdevp->chan); + dma_release_channel(hsdevp->chan); - kfree(hsdevp); - } + kfree(hsdevp); ap->private_data = NULL; } @@ -1448,12 +966,12 @@ static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc) static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag) { int start_dma; - u32 reg, dma_chan; + u32 reg; struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc); struct ata_port *ap = qc->ap; struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); + struct dma_async_tx_descriptor *desc = hsdevp->desc[tag]; int dir = qc->dma_dir; - dma_chan = hsdevp->dma_chan[tag]; if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) { start_dma = 1; @@ -1489,7 +1007,8 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag) SATA_DWC_DMACR_RXCHEN); /* Enable AHB DMA transfer on the specified channel */ - dma_dwc_xfer_start(dma_chan); + dmaengine_submit(desc); + dma_async_issue_pending(hsdevp->chan); } } @@ -1515,26 +1034,21 @@ static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc) */ static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag) { - struct scatterlist *sg = qc->sg; + struct dma_async_tx_descriptor *desc; struct ata_port *ap = qc->ap; - int dma_chan; - struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap); struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap); dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n", __func__, ap->port_no, get_dma_dir_descript(qc->dma_dir), qc->n_elem); - dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag], - hsdevp->llit_dma[tag], - (void __iomem *)&hsdev->sata_dwc_regs->dmadr, - qc->dma_dir); - if (dma_chan < 0) { - dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n", - __func__, dma_chan); + desc = dma_dwc_xfer_setup(qc); + if (!desc) { + dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n", + __func__); return; } - hsdevp->dma_chan[tag] = dma_chan; + hsdevp->desc[tag] = desc; } static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc) @@ -1678,7 +1192,6 @@ static int sata_dwc_probe(struct platform_device *ofdev) struct ata_port_info pi = sata_dwc_port_info[0]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct device_node *np = ofdev->dev.of_node; - u32 dma_chan; /* Allocate DWC SATA device */ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS); @@ -1688,13 +1201,6 @@ static int sata_dwc_probe(struct platform_device *ofdev) host->private_data = hsdev; - if (of_property_read_u32(np, "dma-channel", &dma_chan)) { - dev_warn(&ofdev->dev, "no dma-channel property set." - " Use channel 0\n"); - dma_chan = 0; - } - host_pvt.dma_channel = dma_chan; - /* Ioremap SATA registers */ base = of_iomap(np, 0); if (!base) { @@ -1721,16 +1227,16 @@ static int sata_dwc_probe(struct platform_device *ofdev) idr, ver[0], ver[1], ver[2]); /* Get SATA DMA interrupt number */ - irq = irq_of_parse_and_map(np, 1); - if (irq == NO_IRQ) { + hsdev->dma->irq = irq_of_parse_and_map(np, 1); + if (hsdev->dma->irq == NO_IRQ) { dev_err(&ofdev->dev, "no SATA DMA irq\n"); err = -ENODEV; goto error_iomap; } /* Get physical SATA DMA register base address */ - host_pvt.sata_dma_regs = (void *)of_iomap(np, 1); - if (!(host_pvt.sata_dma_regs)) { + hsdev->dma->regs = of_iomap(np, 1); + if (!hsdev->dma->regs) { dev_err(&ofdev->dev, "ioremap failed for AHBDMA register address\n"); err = -ENODEV; @@ -1740,8 +1246,10 @@ static int sata_dwc_probe(struct platform_device *ofdev) /* Save dev for later use in dev_xxx() routines */ host_pvt.dwc_dev = &ofdev->dev; + hsdev->dma->dev = &ofdev->dev; + /* Initialize AHB DMAC */ - err = dma_dwc_init(hsdev, irq); + err = dw_dma_probe(hsdev->dma, NULL); if (err) goto error_dma_iomap; @@ -1770,9 +1278,9 @@ static int sata_dwc_probe(struct platform_device *ofdev) error_out: /* Free SATA DMA resources */ - dma_dwc_exit(hsdev); + dw_dma_remove(hsdev->dma); error_dma_iomap: - iounmap((void __iomem *)host_pvt.sata_dma_regs); + iounmap(hsdev->dma->regs); error_iomap: iounmap(base); return err; @@ -1787,9 +1295,9 @@ static int sata_dwc_remove(struct platform_device *ofdev) ata_host_detach(host); /* Free SATA DMA resources */ - dma_dwc_exit(hsdev); + dw_dma_remove(hsdev->dma); - iounmap((void __iomem *)host_pvt.sata_dma_regs); + iounmap(hsdev->dma->regs); iounmap(hsdev->reg_base); dev_dbg(&ofdev->dev, "done\n"); return 0; -- cgit v1.2.3-59-g8ed1b