From d4d8819e205854cc102e366f30b8eadd60a58e97 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 16 Apr 2014 11:01:02 -0500 Subject: bus: omap_l3_noc: fix masterid detection As per Documentation (OMAP4+), then masterid is infact encoded as follows: "L3_TARG_STDERRLOG_MSTADDR[7:0] STDERRLOG_MSTADDR stores the NTTP master address. The master address is the concatenation of Prefix & Initiator ConnID. It is defined on 8 bits. The 6 MSBs are used to distinguish the different initiators." So, when we matchup currently with the master ID list, we never get a proper match other than when MPU is the master (thanks to 0). Now, on other platforms such as AM437x, this tends to be bits[5:0]. Fix this by using the relevant 6MSBits to identify the master ID for standard and custom errors. Reported-by: Darren Etheridge Signed-off-by: Nishanth Menon Acked-by: Santosh Shilimkar Acked-by: Peter Ujfalusi Tested-by: Darren Etheridge Tested-by: Sekhar Nori --- drivers/bus/omap_l3_noc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/bus/omap_l3_noc.c') diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c index 9524452ee12c..8a1926daacd7 100644 --- a/drivers/bus/omap_l3_noc.c +++ b/drivers/bus/omap_l3_noc.c @@ -127,7 +127,11 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) L3_TARG_STDERRLOG_MSTADDR; std_err_main = readl_relaxed(l3_targ_stderr); - masterid = readl_relaxed(l3_targ_mstaddr); + + /* STDERRLOG_MSTADDR Stores the NTTP master address. */ + masterid = (readl_relaxed(l3_targ_mstaddr) & + l3->mst_addr_mask) >> + __ffs(l3->mst_addr_mask); switch (std_err_main & CUSTOM_ERROR) { case STANDARD_ERROR: -- cgit v1.2.3-59-g8ed1b