From 692751879ea876dec81357e6f1f8ca0ced131ceb Mon Sep 17 00:00:00 2001
From: Mike Looijmans <mike.looijmans@topic.nl>
Date: Tue, 7 Jan 2020 08:53:40 +0100
Subject: clk, clk-si5341: Support multiple input ports

The Si5341 and Si5340 have multiple input clock options. So far, the driver
only supported the XTAL input, this adds support for the three external
clock inputs as well.

If the clock chip isn't programmed at boot, the driver will default to the
XTAL input as before. If there is no "xtal" clock input available, it will
pick the first connected input (e.g. "in0") as the input clock for the PLL.
One can use clock-assigned-parents to select a particular clock as input.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lkml.kernel.org/r/20200107075340.14528-1-mike.looijmans@topic.nl
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/clk-si5341.c | 212 +++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 196 insertions(+), 16 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c
index 6e780c2a9e6b..3c228b018116 100644
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -16,6 +16,8 @@
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
+#define SI5341_NUM_INPUTS 4
+
 #define SI5341_MAX_NUM_OUTPUTS 10
 #define SI5340_MAX_NUM_OUTPUTS 4
 
@@ -56,8 +58,8 @@ struct clk_si5341 {
 	struct i2c_client *i2c_client;
 	struct clk_si5341_synth synth[SI5341_NUM_SYNTH];
 	struct clk_si5341_output clk[SI5341_MAX_NUM_OUTPUTS];
-	struct clk *pxtal;
-	const char *pxtal_name;
+	struct clk *input_clk[SI5341_NUM_INPUTS];
+	const char *input_clk_name[SI5341_NUM_INPUTS];
 	const u16 *reg_output_offset;
 	const u16 *reg_rdiv_offset;
 	u64 freq_vco; /* 13500–14256 MHz */
@@ -78,10 +80,25 @@ struct clk_si5341_output_config {
 #define SI5341_DEVICE_REV	0x0005
 #define SI5341_STATUS		0x000C
 #define SI5341_SOFT_RST		0x001C
+#define SI5341_IN_SEL		0x0021
+#define SI5341_XAXB_CFG		0x090E
+#define SI5341_IN_EN		0x0949
+#define SI5341_INX_TO_PFD_EN	0x094A
+
+/* Input selection */
+#define SI5341_IN_SEL_MASK	0x06
+#define SI5341_IN_SEL_SHIFT	1
+#define SI5341_IN_SEL_REGCTRL	0x01
+#define SI5341_INX_TO_PFD_SHIFT	4
+
+/* XTAL config bits */
+#define SI5341_XAXB_CFG_EXTCLK_EN	BIT(0)
+#define SI5341_XAXB_CFG_PDNB		BIT(1)
 
 /* Input dividers (48-bit) */
 #define SI5341_IN_PDIV(x)	(0x0208 + ((x) * 10))
 #define SI5341_IN_PSET(x)	(0x020E + ((x) * 10))
+#define SI5341_PX_UPD		0x0230
 
 /* PLL configuration */
 #define SI5341_PLL_M_NUM	0x0235
@@ -120,6 +137,10 @@ struct si5341_reg_default {
 	u8 value;
 };
 
+static const char * const si5341_input_clock_names[] = {
+	"in0", "in1", "in2", "xtal"
+};
+
 /* Output configuration registers 0..9 are not quite logically organized */
 static const u16 si5341_reg_output_offset[] = {
 	0x0108,
@@ -390,7 +411,112 @@ static unsigned long si5341_clk_recalc_rate(struct clk_hw *hw,
 	return (unsigned long)res;
 }
 
+static int si5341_clk_get_selected_input(struct clk_si5341 *data)
+{
+	int err;
+	u32 val;
+
+	err = regmap_read(data->regmap, SI5341_IN_SEL, &val);
+	if (err < 0)
+		return err;
+
+	return (val & SI5341_IN_SEL_MASK) >> SI5341_IN_SEL_SHIFT;
+}
+
+static u8 si5341_clk_get_parent(struct clk_hw *hw)
+{
+	struct clk_si5341 *data = to_clk_si5341(hw);
+	int res = si5341_clk_get_selected_input(data);
+
+	if (res < 0)
+		return 0; /* Apparently we cannot report errors */
+
+	return res;
+}
+
+static int si5341_clk_reparent(struct clk_si5341 *data, u8 index)
+{
+	int err;
+	u8 val;
+
+	val = (index << SI5341_IN_SEL_SHIFT) & SI5341_IN_SEL_MASK;
+	/* Enable register-based input selection */
+	val |= SI5341_IN_SEL_REGCTRL;
+
+	err = regmap_update_bits(data->regmap,
+		SI5341_IN_SEL, SI5341_IN_SEL_REGCTRL | SI5341_IN_SEL_MASK, val);
+	if (err < 0)
+		return err;
+
+	if (index < 3) {
+		/* Enable input buffer for selected input */
+		err = regmap_update_bits(data->regmap,
+				SI5341_IN_EN, 0x07, BIT(index));
+		if (err < 0)
+			return err;
+
+		/* Enables the input to phase detector */
+		err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN,
+				0x7 << SI5341_INX_TO_PFD_SHIFT,
+				BIT(index + SI5341_INX_TO_PFD_SHIFT));
+		if (err < 0)
+			return err;
+
+		/* Power down XTAL oscillator and buffer */
+		err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG,
+				SI5341_XAXB_CFG_PDNB, 0);
+		if (err < 0)
+			return err;
+
+		/*
+		 * Set the P divider to "1". There's no explanation in the
+		 * datasheet of these registers, but the clockbuilder software
+		 * programs a "1" when the input is being used.
+		 */
+		err = regmap_write(data->regmap, SI5341_IN_PDIV(index), 1);
+		if (err < 0)
+			return err;
+
+		err = regmap_write(data->regmap, SI5341_IN_PSET(index), 1);
+		if (err < 0)
+			return err;
+
+		/* Set update PDIV bit */
+		err = regmap_write(data->regmap, SI5341_PX_UPD, BIT(index));
+		if (err < 0)
+			return err;
+	} else {
+		/* Disable all input buffers */
+		err = regmap_update_bits(data->regmap, SI5341_IN_EN, 0x07, 0);
+		if (err < 0)
+			return err;
+
+		/* Disable input to phase detector */
+		err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN,
+				0x7 << SI5341_INX_TO_PFD_SHIFT, 0);
+		if (err < 0)
+			return err;
+
+		/* Power up XTAL oscillator and buffer */
+		err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG,
+				SI5341_XAXB_CFG_PDNB, SI5341_XAXB_CFG_PDNB);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int si5341_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_si5341 *data = to_clk_si5341(hw);
+
+	return si5341_clk_reparent(data, index);
+}
+
 static const struct clk_ops si5341_clk_ops = {
+	.set_parent = si5341_clk_set_parent,
+	.get_parent = si5341_clk_get_parent,
 	.recalc_rate = si5341_clk_recalc_rate,
 };
 
@@ -985,7 +1111,8 @@ static const struct regmap_range si5341_regmap_volatile_range[] = {
 	regmap_reg_range(0x000C, 0x0012), /* Status */
 	regmap_reg_range(0x001C, 0x001E), /* reset, finc/fdec */
 	regmap_reg_range(0x00E2, 0x00FE), /* NVM, interrupts, device ready */
-	/* Update bits for synth config */
+	/* Update bits for P divider and synth config */
+	regmap_reg_range(SI5341_PX_UPD, SI5341_PX_UPD),
 	regmap_reg_range(SI5341_SYNTH_N_UPD(0), SI5341_SYNTH_N_UPD(0)),
 	regmap_reg_range(SI5341_SYNTH_N_UPD(1), SI5341_SYNTH_N_UPD(1)),
 	regmap_reg_range(SI5341_SYNTH_N_UPD(2), SI5341_SYNTH_N_UPD(2)),
@@ -1122,6 +1249,7 @@ static int si5341_initialize_pll(struct clk_si5341 *data)
 	struct device_node *np = data->i2c_client->dev.of_node;
 	u32 m_num = 0;
 	u32 m_den = 0;
+	int sel;
 
 	if (of_property_read_u32(np, "silabs,pll-m-num", &m_num)) {
 		dev_err(&data->i2c_client->dev,
@@ -1135,7 +1263,11 @@ static int si5341_initialize_pll(struct clk_si5341 *data)
 	if (!m_num || !m_den) {
 		dev_err(&data->i2c_client->dev,
 			"PLL configuration invalid, assume 14GHz\n");
-		m_den = clk_get_rate(data->pxtal) / 10;
+		sel = si5341_clk_get_selected_input(data);
+		if (sel < 0)
+			return sel;
+
+		m_den = clk_get_rate(data->input_clk[sel]) / 10;
 		m_num = 1400000000;
 	}
 
@@ -1143,11 +1275,52 @@ static int si5341_initialize_pll(struct clk_si5341 *data)
 			SI5341_PLL_M_NUM, m_num, m_den);
 }
 
+static int si5341_clk_select_active_input(struct clk_si5341 *data)
+{
+	int res;
+	int err;
+	int i;
+
+	res = si5341_clk_get_selected_input(data);
+	if (res < 0)
+		return res;
+
+	/* If the current register setting is invalid, pick the first input */
+	if (!data->input_clk[res]) {
+		dev_dbg(&data->i2c_client->dev,
+			"Input %d not connected, rerouting\n", res);
+		res = -ENODEV;
+		for (i = 0; i < SI5341_NUM_INPUTS; ++i) {
+			if (data->input_clk[i]) {
+				res = i;
+				break;
+			}
+		}
+		if (res < 0) {
+			dev_err(&data->i2c_client->dev,
+				"No clock input available\n");
+			return res;
+		}
+	}
+
+	/* Make sure the selected clock is also enabled and routed */
+	err = si5341_clk_reparent(data, res);
+	if (err < 0)
+		return err;
+
+	err = clk_prepare_enable(data->input_clk[res]);
+	if (err < 0)
+		return err;
+
+	return res;
+}
+
 static int si5341_probe(struct i2c_client *client,
 		const struct i2c_device_id *id)
 {
 	struct clk_si5341 *data;
 	struct clk_init_data init;
+	struct clk *input;
 	const char *root_clock_name;
 	const char *synth_clock_names[SI5341_NUM_SYNTH];
 	int err;
@@ -1161,12 +1334,16 @@ static int si5341_probe(struct i2c_client *client,
 
 	data->i2c_client = client;
 
-	data->pxtal = devm_clk_get(&client->dev, "xtal");
-	if (IS_ERR(data->pxtal)) {
-		if (PTR_ERR(data->pxtal) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		dev_err(&client->dev, "Missing xtal clock input\n");
+	for (i = 0; i < SI5341_NUM_INPUTS; ++i) {
+		input = devm_clk_get(&client->dev, si5341_input_clock_names[i]);
+		if (IS_ERR(input)) {
+			if (PTR_ERR(input) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+			data->input_clk_name[i] = si5341_input_clock_names[i];
+		} else {
+			data->input_clk[i] = input;
+			data->input_clk_name[i] = __clk_get_name(input);
+		}
 	}
 
 	err = si5341_dt_parse_dt(client, config);
@@ -1188,9 +1365,6 @@ static int si5341_probe(struct i2c_client *client,
 	if (err < 0)
 		return err;
 
-	/* "Activate" the xtal (usually a fixed clock) */
-	clk_prepare_enable(data->pxtal);
-
 	if (of_property_read_bool(client->dev.of_node, "silabs,reprogram")) {
 		initialization_required = true;
 	} else {
@@ -1223,7 +1397,14 @@ static int si5341_probe(struct i2c_client *client,
 					ARRAY_SIZE(si5341_reg_defaults));
 		if (err < 0)
 			return err;
+	}
+
+	/* Input must be up and running at this point */
+	err = si5341_clk_select_active_input(data);
+	if (err < 0)
+		return err;
 
+	if (initialization_required) {
 		/* PLL configuration is required */
 		err = si5341_initialize_pll(data);
 		if (err < 0)
@@ -1231,9 +1412,8 @@ static int si5341_probe(struct i2c_client *client,
 	}
 
 	/* Register the PLL */
-	data->pxtal_name = __clk_get_name(data->pxtal);
-	init.parent_names = &data->pxtal_name;
-	init.num_parents = 1; /* For now, only XTAL input supported */
+	init.parent_names = data->input_clk_name;
+	init.num_parents = SI5341_NUM_INPUTS;
 	init.ops = &si5341_clk_ops;
 	init.flags = 0;
 	data->hw.init = &init;
-- 
cgit v1.2.3-59-g8ed1b


From 6e26901a00c04436e9e7a323772b71348aeab651 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Fri, 24 Jan 2020 14:31:37 +0100
Subject: clk: renesas: rcar-gen3: Add CCREE clocks

Add the CryptoCell module clocks and their parents for the CryptoCell
instances in the various Renesas R-Car Gen3 SoCs that do not have
support for them yet in their clock drivers (M3-W/W+, M3-N, E3, D3).

The R-Car H3 clock driver already supports these clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200124133137.15921-1-geert+renesas@glider.be
---
 drivers/clk/renesas/r8a7796-cpg-mssr.c  | 2 ++
 drivers/clk/renesas/r8a77965-cpg-mssr.c | 4 +++-
 drivers/clk/renesas/r8a77990-cpg-mssr.c | 2 ++
 drivers/clk/renesas/r8a77995-cpg-mssr.c | 2 ++
 4 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index e8420d3ada94..1155d6636848 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -105,6 +105,7 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd3",      R8A7796_CLK_SD3,   CLK_SDSRC,     0x26c),
 
 	DEF_FIXED("cl",         R8A7796_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cr",         R8A7796_CLK_CR,    CLK_PLL1_DIV4,  2, 1),
 	DEF_FIXED("cp",         R8A7796_CLK_CP,    CLK_EXTAL,      2, 1),
 	DEF_FIXED("cpex",       R8A7796_CLK_CPEX,  CLK_EXTAL,      2, 1),
 
@@ -132,6 +133,7 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = {
 	DEF_MOD("sys-dmac2",		 217,	R8A7796_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		 218,	R8A7796_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		 219,	R8A7796_CLK_S0D3),
+	DEF_MOD("sceg-pub",		 229,	R8A7796_CLK_CR),
 	DEF_MOD("cmt3",			 300,	R8A7796_CLK_R),
 	DEF_MOD("cmt2",			 301,	R8A7796_CLK_R),
 	DEF_MOD("cmt1",			 302,	R8A7796_CLK_R),
diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c
index b3af4da2ca74..9530480880f1 100644
--- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
@@ -99,7 +99,8 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd2",	R8A77965_CLK_SD2,	CLK_SDSRC,	0x268),
 	DEF_GEN3_SD("sd3",	R8A77965_CLK_SD3,	CLK_SDSRC,	0x26c),
 
-	DEF_FIXED("cl",		R8A77965_CLK_CL,	CLK_PLL1_DIV2,	48, 1),
+	DEF_FIXED("cl",		R8A77965_CLK_CL,	CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cr",         R8A77965_CLK_CR,	CLK_PLL1_DIV4,  2, 1),
 	DEF_FIXED("cp",		R8A77965_CLK_CP,	CLK_EXTAL,	2, 1),
 	DEF_FIXED("cpex",	R8A77965_CLK_CPEX,	CLK_EXTAL,	2, 1),
 
@@ -127,6 +128,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {
 	DEF_MOD("sys-dmac2",		217,	R8A77965_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		218,	R8A77965_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		219,	R8A77965_CLK_S0D3),
+	DEF_MOD("sceg-pub",		229,	R8A77965_CLK_CR),
 
 	DEF_MOD("cmt3",			300,	R8A77965_CLK_R),
 	DEF_MOD("cmt2",			301,	R8A77965_CLK_R),
diff --git a/drivers/clk/renesas/r8a77990-cpg-mssr.c b/drivers/clk/renesas/r8a77990-cpg-mssr.c
index ceabf55c21c2..8eda2e3e2480 100644
--- a/drivers/clk/renesas/r8a77990-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77990-cpg-mssr.c
@@ -105,6 +105,7 @@ static const struct cpg_core_clk r8a77990_core_clks[] __initconst = {
 	DEF_GEN3_SD("sd3",     R8A77990_CLK_SD3,   CLK_SDSRC,	  0x026c),
 
 	DEF_FIXED("cl",        R8A77990_CLK_CL,    CLK_PLL1,      48, 1),
+	DEF_FIXED("cr",        R8A77990_CLK_CR,    CLK_PLL1D2,     2, 1),
 	DEF_FIXED("cp",        R8A77990_CLK_CP,    CLK_EXTAL,      2, 1),
 	DEF_FIXED("cpex",      R8A77990_CLK_CPEX,  CLK_EXTAL,      4, 1),
 
@@ -135,6 +136,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = {
 	DEF_MOD("sys-dmac2",		 217,	R8A77990_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		 218,	R8A77990_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		 219,	R8A77990_CLK_S3D1),
+	DEF_MOD("sceg-pub",		 229,	R8A77990_CLK_CR),
 
 	DEF_MOD("cmt3",			 300,	R8A77990_CLK_R),
 	DEF_MOD("cmt2",			 301,	R8A77990_CLK_R),
diff --git a/drivers/clk/renesas/r8a77995-cpg-mssr.c b/drivers/clk/renesas/r8a77995-cpg-mssr.c
index 962bb337f2e7..056ebf3e70e2 100644
--- a/drivers/clk/renesas/r8a77995-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c
@@ -91,6 +91,7 @@ static const struct cpg_core_clk r8a77995_core_clks[] __initconst = {
 	DEF_FIXED("s3d4",      R8A77995_CLK_S3D4,  CLK_S3,         4, 1),
 
 	DEF_FIXED("cl",        R8A77995_CLK_CL,    CLK_PLL1,      48, 1),
+	DEF_FIXED("cr",        R8A77995_CLK_CR,    CLK_PLL1D2,     2, 1),
 	DEF_FIXED("cp",        R8A77995_CLK_CP,    CLK_EXTAL,      2, 1),
 	DEF_FIXED("cpex",      R8A77995_CLK_CPEX,  CLK_EXTAL,      4, 1),
 
@@ -122,6 +123,7 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = {
 	DEF_MOD("sys-dmac2",		 217,	R8A77995_CLK_S3D1),
 	DEF_MOD("sys-dmac1",		 218,	R8A77995_CLK_S3D1),
 	DEF_MOD("sys-dmac0",		 219,	R8A77995_CLK_S3D1),
+	DEF_MOD("sceg-pub",		 229,	R8A77995_CLK_CR),
 	DEF_MOD("cmt3",			 300,	R8A77995_CLK_R),
 	DEF_MOD("cmt2",			 301,	R8A77995_CLK_R),
 	DEF_MOD("cmt1",			 302,	R8A77995_CLK_R),
-- 
cgit v1.2.3-59-g8ed1b


From 9e6f3b44dc75666bd1861f49aea0f8dfa8c67499 Mon Sep 17 00:00:00 2001
From: Dirk Behme <dirk.behme@de.bosch.com>
Date: Mon, 3 Feb 2020 08:28:59 +0100
Subject: clk: renesas: r8a7795: Add RPC clocks

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from
it, as well as the RPC-IF module clock, in the R-Car H3 (R8A7795)
CPG/MSSR driver.

Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20200203072901.31548-1-dirk.behme@de.bosch.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/r8a7795-cpg-mssr.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c
index fbc8c75f4314..ff5b3020cb03 100644
--- a/drivers/clk/renesas/r8a7795-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c
@@ -44,6 +44,7 @@ enum clk_ids {
 	CLK_S3,
 	CLK_SDSRC,
 	CLK_SSPSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 
 	/* Module Clocks */
@@ -70,6 +71,12 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {
 	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
 	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED(".sdsrc",     CLK_SDSRC,         CLK_PLL1_DIV2,  2, 1),
+	DEF_BASE(".rpcsrc",	CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+	DEF_BASE("rpc",		R8A7795_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A7795_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A7795_CLK_RPC),
 
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
@@ -242,6 +249,7 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {
 	DEF_MOD("can-fd",		 914,	R8A7795_CLK_S3D2),
 	DEF_MOD("can-if1",		 915,	R8A7795_CLK_S3D4),
 	DEF_MOD("can-if0",		 916,	R8A7795_CLK_S3D4),
+	DEF_MOD("rpc-if",		 917,	R8A7795_CLK_RPCD2),
 	DEF_MOD("i2c6",			 918,	R8A7795_CLK_S0D6),
 	DEF_MOD("i2c5",			 919,	R8A7795_CLK_S0D6),
 	DEF_MOD("i2c-dvfs",		 926,	R8A7795_CLK_CP),
-- 
cgit v1.2.3-59-g8ed1b


From 715286f51d13f125de6dbc13f2d707a7893bf95d Mon Sep 17 00:00:00 2001
From: Dirk Behme <dirk.behme@de.bosch.com>
Date: Mon, 3 Feb 2020 08:29:00 +0100
Subject: clk: renesas: r8a7796: Add RPC clocks

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from
it, as well as the RPC-IF module clock, in the R-Car M3-W/M3-W+
(R8A7796) CPG/MSSR driver.

Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20200203072901.31548-2-dirk.behme@de.bosch.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/r8a7796-cpg-mssr.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c
index 1155d6636848..e8d466dbc7f9 100644
--- a/drivers/clk/renesas/r8a7796-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c
@@ -46,6 +46,7 @@ enum clk_ids {
 	CLK_S3,
 	CLK_SDSRC,
 	CLK_SSPSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 
 	/* Module Clocks */
@@ -72,6 +73,12 @@ static const struct cpg_core_clk r8a7796_core_clks[] __initconst = {
 	DEF_FIXED(".s2",        CLK_S2,            CLK_PLL1_DIV2,  4, 1),
 	DEF_FIXED(".s3",        CLK_S3,            CLK_PLL1_DIV2,  6, 1),
 	DEF_FIXED(".sdsrc",     CLK_SDSRC,         CLK_PLL1_DIV2,  2, 1),
+	DEF_BASE(".rpcsrc",	CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+	DEF_BASE("rpc",		R8A7796_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A7796_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A7796_CLK_RPC),
 
 	DEF_GEN3_OSC(".r",      CLK_RINT,          CLK_EXTAL,      32),
 
@@ -217,6 +224,7 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = {
 	DEF_MOD("can-fd",		 914,	R8A7796_CLK_S3D2),
 	DEF_MOD("can-if1",		 915,	R8A7796_CLK_S3D4),
 	DEF_MOD("can-if0",		 916,	R8A7796_CLK_S3D4),
+	DEF_MOD("rpc-if",		 917,	R8A7796_CLK_RPCD2),
 	DEF_MOD("i2c6",			 918,	R8A7796_CLK_S0D6),
 	DEF_MOD("i2c5",			 919,	R8A7796_CLK_S0D6),
 	DEF_MOD("i2c-dvfs",		 926,	R8A7796_CLK_CP),
-- 
cgit v1.2.3-59-g8ed1b


From 808eab15f39be1ed9502244d2aa4f35209f9d0d5 Mon Sep 17 00:00:00 2001
From: Dirk Behme <dirk.behme@de.bosch.com>
Date: Mon, 3 Feb 2020 08:29:01 +0100
Subject: clk: renesas: r8a77965: Add RPC clocks

Describe the RPCSRC internal clock and the RPC[D2] clocks derived from
it, as well as the RPC-IF module clock, in the R-Car M3-N (R8A77965)
CPG/MSSR driver.

Inspired by commit 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks").

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20200203072901.31548-3-dirk.behme@de.bosch.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/r8a77965-cpg-mssr.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c
index 9530480880f1..7a05a2fc1cc6 100644
--- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
@@ -43,6 +43,7 @@ enum clk_ids {
 	CLK_S3,
 	CLK_SDSRC,
 	CLK_SSPSRC,
+	CLK_RPCSRC,
 	CLK_RINT,
 
 	/* Module Clocks */
@@ -68,6 +69,12 @@ static const struct cpg_core_clk r8a77965_core_clks[] __initconst = {
 	DEF_FIXED(".s2",	CLK_S2,			CLK_PLL1_DIV2,	4, 1),
 	DEF_FIXED(".s3",	CLK_S3,			CLK_PLL1_DIV2,	6, 1),
 	DEF_FIXED(".sdsrc",	CLK_SDSRC,		CLK_PLL1_DIV2,	2, 1),
+	DEF_BASE(".rpcsrc",	CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1),
+
+	DEF_BASE("rpc",		R8A77965_CLK_RPC, CLK_TYPE_GEN3_RPC,
+		 CLK_RPCSRC),
+	DEF_BASE("rpcd2",	R8A77965_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2,
+		 R8A77965_CLK_RPC),
 
 	DEF_GEN3_OSC(".r",	CLK_RINT,		CLK_EXTAL,	32),
 
@@ -217,6 +224,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = {
 	DEF_MOD("can-fd",		914,	R8A77965_CLK_S3D2),
 	DEF_MOD("can-if1",		915,	R8A77965_CLK_S3D4),
 	DEF_MOD("can-if0",		916,	R8A77965_CLK_S3D4),
+	DEF_MOD("rpc-if",		917,	R8A77965_CLK_RPCD2),
 	DEF_MOD("i2c6",			918,	R8A77965_CLK_S0D6),
 	DEF_MOD("i2c5",			919,	R8A77965_CLK_S0D6),
 	DEF_MOD("i2c-dvfs",		926,	R8A77965_CLK_CP),
-- 
cgit v1.2.3-59-g8ed1b


From 1de8493069b8f510e586242c1b4329cd3c9b6fb9 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Mon, 10 Feb 2020 18:06:53 +0100
Subject: clk: sunxi-ng: a64: Export MBUS clock

MBUS clock will be referenced in MBUS controller node.

Export it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.h      | 4 ----
 include/dt-bindings/clock/sun50i-a64-ccu.h | 2 +-
 2 files changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
index 116e6f826d04..54d1f96f4b68 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
@@ -55,10 +55,6 @@
 
 /* All the DRAM gates are exported */
 
-/* Some more module clocks are exported */
-
-#define CLK_MBUS			112
-
 /* And the DSI and GPU module clock is exported */
 
 #define CLK_NUMBER			(CLK_GPU + 1)
diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
index e512a1c9b0fc..318eb15c414c 100644
--- a/include/dt-bindings/clock/sun50i-a64-ccu.h
+++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -131,7 +131,7 @@
 #define CLK_AVS			109
 #define CLK_HDMI		110
 #define CLK_HDMI_DDC		111
-
+#define CLK_MBUS		112
 #define CLK_DSI_DPHY		113
 #define CLK_GPU			114
 
-- 
cgit v1.2.3-59-g8ed1b


From 2b48dcb7a821fc38e0be3e171bd02e058196ccf1 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 11 Feb 2020 19:59:30 +0100
Subject: clk: sunxi-ng: sun8i-de2: Split out H5 definitions

H5 has less clocks and resets than A64. Currently that's not obvious
because A64 is missing rotation core related clocks and reset.

Split out H5 definition. A64 structures will be fixed in subsequent
commit.

Note that this patch depends on commit 19368d99746e ("clk: sunxi-ng:
add support for Allwinner H3 DE2 CCU") for the H3 clock list.

Fixes: 763c5bd045b1 ("clk: sunxi-ng: add support for DE2 CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index d9668493c3f9..2478ae314d0f 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -192,6 +192,12 @@ static struct ccu_reset_map sun50i_a64_de2_resets[] = {
 	[RST_WB]	= { 0x08, BIT(2) },
 };
 
+static struct ccu_reset_map sun50i_h5_de2_resets[] = {
+	[RST_MIXER0]	= { 0x08, BIT(0) },
+	[RST_MIXER1]	= { 0x08, BIT(1) },
+	[RST_WB]	= { 0x08, BIT(2) },
+};
+
 static struct ccu_reset_map sun50i_h6_de3_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	[RST_MIXER1]	= { 0x08, BIT(1) },
@@ -229,6 +235,16 @@ static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_a64_de2_resets),
 };
 
+static const struct sunxi_ccu_desc sun50i_h5_de2_clk_desc = {
+	.ccu_clks	= sun8i_h3_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_h3_de2_clks),
+
+	.hw_clks	= &sun8i_h3_de2_hw_clks,
+
+	.resets		= sun50i_h5_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h5_de2_resets),
+};
+
 static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = {
 	.ccu_clks	= sun50i_h6_de3_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_de3_clks),
@@ -347,7 +363,7 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
 	},
 	{
 		.compatible = "allwinner,sun50i-h5-de2-clk",
-		.data = &sun50i_a64_de2_clk_desc,
+		.data = &sun50i_h5_de2_clk_desc,
 	},
 	{
 		.compatible = "allwinner,sun50i-h6-de3-clk",
-- 
cgit v1.2.3-59-g8ed1b


From b4bbce660a3694811b5500c40b9cd69513b50d38 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 11 Feb 2020 19:59:31 +0100
Subject: clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64

A64 has rotation core which needs clocks and reset. Because there is no
appropriate structures available, make a separate, A64 specific
structures.

Fixes: cf4881c12935 ("clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 45 +++++++++++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 2478ae314d0f..c6220be8e205 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -108,6 +108,24 @@ static struct ccu_common *sun8i_v3s_de2_clks[] = {
 	&wb_div_clk.common,
 };
 
+static struct ccu_common *sun50i_a64_de2_clks[] = {
+	&mixer0_clk.common,
+	&mixer1_clk.common,
+	&wb_clk.common,
+
+	&bus_mixer0_clk.common,
+	&bus_mixer1_clk.common,
+	&bus_wb_clk.common,
+
+	&mixer0_div_clk.common,
+	&mixer1_div_clk.common,
+	&wb_div_clk.common,
+
+	&bus_rot_clk.common,
+	&rot_clk.common,
+	&rot_div_clk.common,
+};
+
 static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
 	.hws	= {
 		[CLK_MIXER0]		= &mixer0_clk.common.hw,
@@ -156,6 +174,26 @@ static struct clk_hw_onecell_data sun8i_v3s_de2_hw_clks = {
 	.num	= CLK_NUMBER_WITHOUT_ROT,
 };
 
+static struct clk_hw_onecell_data sun50i_a64_de2_hw_clks = {
+	.hws	= {
+		[CLK_MIXER0]		= &mixer0_clk.common.hw,
+		[CLK_MIXER1]		= &mixer1_clk.common.hw,
+		[CLK_WB]		= &wb_clk.common.hw,
+		[CLK_ROT]		= &rot_clk.common.hw,
+
+		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
+		[CLK_BUS_MIXER1]	= &bus_mixer1_clk.common.hw,
+		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
+		[CLK_BUS_ROT]		= &bus_rot_clk.common.hw,
+
+		[CLK_MIXER0_DIV]	= &mixer0_div_clk.common.hw,
+		[CLK_MIXER1_DIV]	= &mixer1_div_clk.common.hw,
+		[CLK_WB_DIV]		= &wb_div_clk.common.hw,
+		[CLK_ROT_DIV]		= &rot_div_clk.common.hw,
+	},
+	.num	= CLK_NUMBER_WITH_ROT,
+};
+
 static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
 	.hws	= {
 		[CLK_MIXER0]		= &mixer0_clk.common.hw,
@@ -190,6 +228,7 @@ static struct ccu_reset_map sun50i_a64_de2_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	[RST_MIXER1]	= { 0x08, BIT(1) },
 	[RST_WB]	= { 0x08, BIT(2) },
+	[RST_ROT]	= { 0x08, BIT(3) },
 };
 
 static struct ccu_reset_map sun50i_h5_de2_resets[] = {
@@ -226,10 +265,10 @@ static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = {
 };
 
 static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
-	.ccu_clks	= sun8i_h3_de2_clks,
-	.num_ccu_clks	= ARRAY_SIZE(sun8i_h3_de2_clks),
+	.ccu_clks	= sun50i_a64_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a64_de2_clks),
 
-	.hw_clks	= &sun8i_h3_de2_hw_clks,
+	.hw_clks	= &sun50i_a64_de2_hw_clks,
 
 	.resets		= sun50i_a64_de2_resets,
 	.num_resets	= ARRAY_SIZE(sun50i_a64_de2_resets),
-- 
cgit v1.2.3-59-g8ed1b


From 75250eb75c828eebda77e23f44de0f037546ea9a Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 11 Feb 2020 19:59:32 +0100
Subject: clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core

DE3 documentation regarding presence of rotate core in H6 is a bit
confusing. Register descriptions mention bits for enabling rotate core
clocks and reset, but general overview doesn't list it as feature of H6
display engine, BSP kernel doesn't support it and there is no interrupt
listed for it. Manual poking registers also didn't reveal presence of
rotate core.

Let's assume there isn't any rotate core on H6 present and remove
related clocks. With that done, structures are same as those for H5, so
just reuse H5 structure.

Fixes: 56808da9f97f ("clk: sunxi-ng: Add support for H6 DE3 clocks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 57 +-----------------------------------
 1 file changed, 1 insertion(+), 56 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index c6220be8e205..87a30d072ae9 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -51,24 +51,6 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4,
 static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
 		   CLK_SET_RATE_PARENT);
 
-static struct ccu_common *sun50i_h6_de3_clks[] = {
-	&mixer0_clk.common,
-	&mixer1_clk.common,
-	&wb_clk.common,
-
-	&bus_mixer0_clk.common,
-	&bus_mixer1_clk.common,
-	&bus_wb_clk.common,
-
-	&mixer0_div_clk.common,
-	&mixer1_div_clk.common,
-	&wb_div_clk.common,
-
-	&bus_rot_clk.common,
-	&rot_clk.common,
-	&rot_div_clk.common,
-};
-
 static struct ccu_common *sun8i_a83t_de2_clks[] = {
 	&mixer0_clk.common,
 	&mixer1_clk.common,
@@ -194,26 +176,6 @@ static struct clk_hw_onecell_data sun50i_a64_de2_hw_clks = {
 	.num	= CLK_NUMBER_WITH_ROT,
 };
 
-static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
-	.hws	= {
-		[CLK_MIXER0]		= &mixer0_clk.common.hw,
-		[CLK_MIXER1]		= &mixer1_clk.common.hw,
-		[CLK_WB]		= &wb_clk.common.hw,
-		[CLK_ROT]		= &rot_clk.common.hw,
-
-		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
-		[CLK_BUS_MIXER1]	= &bus_mixer1_clk.common.hw,
-		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
-		[CLK_BUS_ROT]		= &bus_rot_clk.common.hw,
-
-		[CLK_MIXER0_DIV]	= &mixer0_div_clk.common.hw,
-		[CLK_MIXER1_DIV]	= &mixer1_div_clk.common.hw,
-		[CLK_WB_DIV]		= &wb_div_clk.common.hw,
-		[CLK_ROT_DIV]		= &rot_div_clk.common.hw,
-	},
-	.num	= CLK_NUMBER_WITH_ROT,
-};
-
 static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	/*
@@ -237,13 +199,6 @@ static struct ccu_reset_map sun50i_h5_de2_resets[] = {
 	[RST_WB]	= { 0x08, BIT(2) },
 };
 
-static struct ccu_reset_map sun50i_h6_de3_resets[] = {
-	[RST_MIXER0]	= { 0x08, BIT(0) },
-	[RST_MIXER1]	= { 0x08, BIT(1) },
-	[RST_WB]	= { 0x08, BIT(2) },
-	[RST_ROT]	= { 0x08, BIT(3) },
-};
-
 static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
 	.ccu_clks	= sun8i_a83t_de2_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun8i_a83t_de2_clks),
@@ -284,16 +239,6 @@ static const struct sunxi_ccu_desc sun50i_h5_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_h5_de2_resets),
 };
 
-static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = {
-	.ccu_clks	= sun50i_h6_de3_clks,
-	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_de3_clks),
-
-	.hw_clks	= &sun50i_h6_de3_hw_clks,
-
-	.resets		= sun50i_h6_de3_resets,
-	.num_resets	= ARRAY_SIZE(sun50i_h6_de3_resets),
-};
-
 static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
 	.ccu_clks	= sun8i_v3s_de2_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_de2_clks),
@@ -406,7 +351,7 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
 	},
 	{
 		.compatible = "allwinner,sun50i-h6-de3-clk",
-		.data = &sun50i_h6_de3_clk_desc,
+		.data = &sun50i_h5_de2_clk_desc,
 	},
 	{ }
 };
-- 
cgit v1.2.3-59-g8ed1b


From 8f9b11a33ad6976e17e7279a170864a1fc613803 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 11 Feb 2020 19:59:33 +0100
Subject: clk: sunxi-ng: sun8i-de2: Don't reuse A83T resets

Currently, V3s and H3 reuse A83T reset structure. However, A83T contains
additional core for rotation, which is not present in V3s and H3.

Make new reset structure for H3 and let V3s reuse it. A83T reset
structure will be amended in subsequent commit.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 87a30d072ae9..bbbe1ed7aba1 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -179,9 +179,18 @@ static struct clk_hw_onecell_data sun50i_a64_de2_hw_clks = {
 static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
 	[RST_MIXER0]	= { 0x08, BIT(0) },
 	/*
-	 * For A83T, H3 and R40, mixer1 reset line is shared with wb, so
-	 * only RST_WB is exported here.
-	 * For V3s there's just no mixer1, so it also shares this struct.
+	 * Mixer1 reset line is shared with wb, so only RST_WB is
+	 * exported here.
+	 */
+	[RST_WB]	= { 0x08, BIT(2) },
+};
+
+static struct ccu_reset_map sun8i_h3_de2_resets[] = {
+	[RST_MIXER0]	= { 0x08, BIT(0) },
+	/*
+	 * Mixer1 reset line is shared with wb, so only RST_WB is
+	 * exported here.
+	 * V3s doesn't have mixer1, so it also shares this struct.
 	 */
 	[RST_WB]	= { 0x08, BIT(2) },
 };
@@ -215,8 +224,8 @@ static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = {
 
 	.hw_clks	= &sun8i_h3_de2_hw_clks,
 
-	.resets		= sun8i_a83t_de2_resets,
-	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
+	.resets		= sun8i_h3_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_h3_de2_resets),
 };
 
 static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
@@ -245,8 +254,8 @@ static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
 
 	.hw_clks	= &sun8i_v3s_de2_hw_clks,
 
-	.resets		= sun8i_a83t_de2_resets,
-	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
+	.resets		= sun8i_h3_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_h3_de2_resets),
 };
 
 static int sunxi_de2_clk_probe(struct platform_device *pdev)
-- 
cgit v1.2.3-59-g8ed1b


From b0bfba905cf81d540acaac7a4b23459f7df1bb24 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 11 Feb 2020 19:59:34 +0100
Subject: clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83T

A83T structures don't have clocks and reset for rotation core. Add them.

Fixes: 763c5bd045b1 ("clk: sunxi-ng: add support for DE2 CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index bbbe1ed7aba1..9656553c01f3 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -50,6 +50,8 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div", "pll-de", 0x0c, 4, 4,
 		   CLK_SET_RATE_PARENT);
 static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
 		   CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M(rot_div_a83_clk, "rot-div", "pll-de", 0x0c, 0x0c, 4,
+		   CLK_SET_RATE_PARENT);
 
 static struct ccu_common *sun8i_a83t_de2_clks[] = {
 	&mixer0_clk.common,
@@ -63,6 +65,10 @@ static struct ccu_common *sun8i_a83t_de2_clks[] = {
 	&mixer0_div_a83_clk.common,
 	&mixer1_div_a83_clk.common,
 	&wb_div_a83_clk.common,
+
+	&bus_rot_clk.common,
+	&rot_clk.common,
+	&rot_div_a83_clk.common,
 };
 
 static struct ccu_common *sun8i_h3_de2_clks[] = {
@@ -113,16 +119,19 @@ static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
 		[CLK_MIXER0]		= &mixer0_clk.common.hw,
 		[CLK_MIXER1]		= &mixer1_clk.common.hw,
 		[CLK_WB]		= &wb_clk.common.hw,
+		[CLK_ROT]		= &rot_clk.common.hw,
 
 		[CLK_BUS_MIXER0]	= &bus_mixer0_clk.common.hw,
 		[CLK_BUS_MIXER1]	= &bus_mixer1_clk.common.hw,
 		[CLK_BUS_WB]		= &bus_wb_clk.common.hw,
+		[CLK_BUS_ROT]		= &bus_rot_clk.common.hw,
 
 		[CLK_MIXER0_DIV]	= &mixer0_div_a83_clk.common.hw,
 		[CLK_MIXER1_DIV]	= &mixer1_div_a83_clk.common.hw,
 		[CLK_WB_DIV]		= &wb_div_a83_clk.common.hw,
+		[CLK_ROT_DIV]		= &rot_div_a83_clk.common.hw,
 	},
-	.num	= CLK_NUMBER_WITHOUT_ROT,
+	.num	= CLK_NUMBER_WITH_ROT,
 };
 
 static struct clk_hw_onecell_data sun8i_h3_de2_hw_clks = {
@@ -183,6 +192,7 @@ static struct ccu_reset_map sun8i_a83t_de2_resets[] = {
 	 * exported here.
 	 */
 	[RST_WB]	= { 0x08, BIT(2) },
+	[RST_ROT]	= { 0x08, BIT(3) },
 };
 
 static struct ccu_reset_map sun8i_h3_de2_resets[] = {
-- 
cgit v1.2.3-59-g8ed1b


From 11d0c436ffed1dba397e9adec9eaebfe7eef2d10 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 11 Feb 2020 19:59:35 +0100
Subject: clk: sunxi-ng: sun8i-de2: Add R40 specific quirks

R40 is actually very similar to A64, but it doesn't have mixer1 reset.
This means it's clocks and resets combination is unique and R40 specific
quirks are needed.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 9656553c01f3..5a278c391f1d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -238,6 +238,16 @@ static const struct sunxi_ccu_desc sun8i_h3_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_h3_de2_resets),
 };
 
+static const struct sunxi_ccu_desc sun8i_r40_de2_clk_desc = {
+	.ccu_clks	= sun50i_a64_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a64_de2_clks),
+
+	.hw_clks	= &sun50i_a64_de2_hw_clks,
+
+	.resets		= sun8i_a83t_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
 static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
 	.ccu_clks	= sun50i_a64_de2_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun50i_a64_de2_clks),
@@ -356,6 +366,10 @@ static const struct of_device_id sunxi_de2_clk_ids[] = {
 		.compatible = "allwinner,sun8i-h3-de2-clk",
 		.data = &sun8i_h3_de2_clk_desc,
 	},
+	{
+		.compatible = "allwinner,sun8i-r40-de2-clk",
+		.data = &sun8i_r40_de2_clk_desc,
+	},
 	{
 		.compatible = "allwinner,sun8i-v3s-de2-clk",
 		.data = &sun8i_v3s_de2_clk_desc,
-- 
cgit v1.2.3-59-g8ed1b


From b998b75f8603c37c8a43a3d849cd2c4929adf402 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Tue, 11 Feb 2020 19:59:36 +0100
Subject: clk: sunxi-ng: sun8i-de2: Sort structures

V3s quirks are not in right place. Move it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 5a278c391f1d..524f33275bc7 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -248,6 +248,16 @@ static const struct sunxi_ccu_desc sun8i_r40_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
 };
 
+static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
+	.ccu_clks	= sun8i_v3s_de2_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_de2_clks),
+
+	.hw_clks	= &sun8i_v3s_de2_hw_clks,
+
+	.resets		= sun8i_a83t_de2_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a83t_de2_resets),
+};
+
 static const struct sunxi_ccu_desc sun50i_a64_de2_clk_desc = {
 	.ccu_clks	= sun50i_a64_de2_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun50i_a64_de2_clks),
@@ -268,16 +278,6 @@ static const struct sunxi_ccu_desc sun50i_h5_de2_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_h5_de2_resets),
 };
 
-static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
-	.ccu_clks	= sun8i_v3s_de2_clks,
-	.num_ccu_clks	= ARRAY_SIZE(sun8i_v3s_de2_clks),
-
-	.hw_clks	= &sun8i_v3s_de2_hw_clks,
-
-	.resets		= sun8i_h3_de2_resets,
-	.num_resets	= ARRAY_SIZE(sun8i_h3_de2_resets),
-};
-
 static int sunxi_de2_clk_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-- 
cgit v1.2.3-59-g8ed1b


From 1a6151128c847c473da1c7e7022ef78d3e2d6689 Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Mon, 10 Feb 2020 09:31:06 +0530
Subject: clk: qcom: gpucc: Add support for GX GDSC for SC7180

Most of the time the CPU should not be touching the GX domain on the
GPU except for a very special use case when the CPU needs to force the
GX headswitch off. Add the GX domain for that use case.  As part of
this add a dummy enable function for the GX gdsc to simulate success
so that the pm_runtime reference counting is correct.  This matches
what was done in sdm845 in commit 85a3d920d30a ("clk: qcom: Add a
dummy enable function for GX gdsc").

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/1581307266-26989-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/gpucc-sc7180.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/gpucc-sc7180.c b/drivers/clk/qcom/gpucc-sc7180.c
index a96c0b945de2..7b656b6aeced 100644
--- a/drivers/clk/qcom/gpucc-sc7180.c
+++ b/drivers/clk/qcom/gpucc-sc7180.c
@@ -170,8 +170,45 @@ static struct gdsc cx_gdsc = {
 	.flags = VOTABLE,
 };
 
+/*
+ * On SC7180 the GPU GX domain is *almost* entirely controlled by the GMU
+ * running in the CX domain so the CPU doesn't need to know anything about the
+ * GX domain EXCEPT....
+ *
+ * Hardware constraints dictate that the GX be powered down before the CX. If
+ * the GMU crashes it could leave the GX on. In order to successfully bring back
+ * the device the CPU needs to disable the GX headswitch. There being no sane
+ * way to reach in and touch that register from deep inside the GPU driver we
+ * need to set up the infrastructure to be able to ensure that the GPU can
+ * ensure that the GX is off during this super special case. We do this by
+ * defining a GX gdsc with a dummy enable function and a "default" disable
+ * function.
+ *
+ * This allows us to attach with genpd_dev_pm_attach_by_name() in the GPU
+ * driver. During power up, nothing will happen from the CPU (and the GMU will
+ * power up normally but during power down this will ensure that the GX domain
+ * is *really* off - this gives us a semi standard way of doing what we need.
+ */
+static int gx_gdsc_enable(struct generic_pm_domain *domain)
+{
+	/* Do nothing but give genpd the impression that we were successful */
+	return 0;
+}
+
+static struct gdsc gx_gdsc = {
+	.gdscr = 0x100c,
+	.clamp_io_ctrl = 0x1508,
+	.pd = {
+		.name = "gx_gdsc",
+		.power_on = gx_gdsc_enable,
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO,
+};
+
 static struct gdsc *gpu_cc_sc7180_gdscs[] = {
 	[CX_GDSC] = &cx_gdsc,
+	[GX_GDSC] = &gx_gdsc,
 };
 
 static struct clk_regmap *gpu_cc_sc7180_clocks[] = {
-- 
cgit v1.2.3-59-g8ed1b


From f78f29079327a2f0052096f65a06f66838e82b70 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <swboyd@chromium.org>
Date: Tue, 4 Feb 2020 22:54:21 -0800
Subject: clk: qcom: alpha-pll: Make error prints more informative

I recently ran across this printk error message spewing in my logs

 Call set rate on the PLL with rounded rates!

and I had no idea what clk that was or what rate was failing to round
properly. Make the printk more informative by telling us what went wrong
and also add the name of the clk that's failing to change rate.
Furthermore, update the other printks in this file with the clk name
each time so we know what clk we're talking about.

Cc: Taniya Das <tdas@codeaurora.org>
Cc: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lkml.kernel.org/r/20200205065421.9426-1-swboyd@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 7c2936da9b14..6d946770a80f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -544,7 +544,8 @@ static int __clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	rate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
 	vco = alpha_pll_find_vco(pll, rate);
 	if (pll->vco_table && !vco) {
-		pr_err("alpha pll not in a valid vco range\n");
+		pr_err("%s: alpha pll not in a valid vco range\n",
+		       clk_hw_get_name(hw));
 		return -EINVAL;
 	}
 
@@ -722,7 +723,7 @@ static int alpha_pll_huayra_set_rate(struct clk_hw *hw, unsigned long rate,
 	 */
 	if (clk_alpha_pll_is_enabled(hw)) {
 		if (cur_alpha != a) {
-			pr_err("clock needs to be gated %s\n",
+			pr_err("%s: clock needs to be gated\n",
 			       clk_hw_get_name(hw));
 			return -EBUSY;
 		}
@@ -1170,7 +1171,7 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
 	u32 l, alpha_width = pll_alpha_width(pll);
 	u64 a;
-	unsigned long rrate;
+	unsigned long rrate, max = rate + FABIA_PLL_RATE_MARGIN;
 
 	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
 
@@ -1178,8 +1179,9 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
 	 * Due to limited number of bits for fractional rate programming, the
 	 * rounded up rate could be marginally higher than the requested rate.
 	 */
-	if (rrate > (rate + FABIA_PLL_RATE_MARGIN) || rrate < rate) {
-		pr_err("Call set rate on the PLL with rounded rates!\n");
+	if (rrate > max || rrate < rate) {
+		pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
+		       clk_hw_get_name(hw), rrate, rate, max);
 		return -EINVAL;
 	}
 
@@ -1196,6 +1198,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 	struct clk_hw *parent_hw;
 	unsigned long cal_freq, rrate;
 	u32 cal_l, val, alpha_width = pll_alpha_width(pll);
+	const char *name = clk_hw_get_name(hw);
 	u64 a;
 	int ret;
 
@@ -1210,7 +1213,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 
 	vco = alpha_pll_find_vco(pll, clk_hw_get_rate(hw));
 	if (!vco) {
-		pr_err("alpha pll: not in a valid vco range\n");
+		pr_err("%s: alpha pll not in a valid vco range\n", name);
 		return -EINVAL;
 	}
 
@@ -1236,7 +1239,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 	/* Bringup the PLL at calibration frequency */
 	ret = clk_alpha_pll_enable(hw);
 	if (ret) {
-		pr_err("alpha pll calibration failed\n");
+		pr_err("%s: alpha pll calibration failed\n", name);
 		return ret;
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 29093b1a5833c24c692abb1370de547d2a60e6be Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Fri, 24 Jan 2020 14:32:22 -0800
Subject: clk: qcom: rpmh: Add support for RPMH clocks on SM8250

Add support for RPMH clocks on SM8250.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Link: https://lkml.kernel.org/r/1579905147-12142-3-git-send-email-vnkgutta@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-rpmh.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 98a118c1e244..12bd8715dece 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/clk-provider.h>
@@ -404,6 +404,28 @@ static const struct clk_rpmh_desc clk_rpmh_sc7180 = {
 	.num_clks = ARRAY_SIZE(sc7180_rpmh_clocks),
 };
 
+DEFINE_CLK_RPMH_VRM(sm8250, ln_bb_clk1, ln_bb_clk1_ao, "lnbclka1", 2);
+
+static struct clk_hw *sm8250_rpmh_clocks[] = {
+	[RPMH_CXO_CLK]		= &sdm845_bi_tcxo.hw,
+	[RPMH_CXO_CLK_A]	= &sdm845_bi_tcxo_ao.hw,
+	[RPMH_LN_BB_CLK1]	= &sm8250_ln_bb_clk1.hw,
+	[RPMH_LN_BB_CLK1_A]	= &sm8250_ln_bb_clk1_ao.hw,
+	[RPMH_LN_BB_CLK2]	= &sdm845_ln_bb_clk2.hw,
+	[RPMH_LN_BB_CLK2_A]	= &sdm845_ln_bb_clk2_ao.hw,
+	[RPMH_LN_BB_CLK3]	= &sdm845_ln_bb_clk3.hw,
+	[RPMH_LN_BB_CLK3_A]	= &sdm845_ln_bb_clk3_ao.hw,
+	[RPMH_RF_CLK1]		= &sdm845_rf_clk1.hw,
+	[RPMH_RF_CLK1_A]	= &sdm845_rf_clk1_ao.hw,
+	[RPMH_RF_CLK3]		= &sdm845_rf_clk3.hw,
+	[RPMH_RF_CLK3_A]	= &sdm845_rf_clk3_ao.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sm8250 = {
+	.clks = sm8250_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sm8250_rpmh_clocks),
+};
+
 static struct clk_hw *of_clk_rpmh_hw_get(struct of_phandle_args *clkspec,
 					 void *data)
 {
@@ -490,6 +512,7 @@ static const struct of_device_id clk_rpmh_match_table[] = {
 	{ .compatible = "qcom,sc7180-rpmh-clk", .data = &clk_rpmh_sc7180},
 	{ .compatible = "qcom,sdm845-rpmh-clk", .data = &clk_rpmh_sdm845},
 	{ .compatible = "qcom,sm8150-rpmh-clk", .data = &clk_rpmh_sm8150},
+	{ .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, clk_rpmh_match_table);
-- 
cgit v1.2.3-59-g8ed1b


From f21cf9c77ee82ef8adfeb2143adfacf21ec1d5cc Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@kernel.org>
Date: Wed, 5 Feb 2020 15:27:59 -0800
Subject: clk: Don't cache errors from clk_ops::get_phase()

We don't check for errors from clk_ops::get_phase() before storing away
the result into the clk_core::phase member. This can lead to some fairly
confusing debugfs information if these ops do return an error. Let's
skip the store when this op fails to fix this. While we're here, move
the locking outside of clk_core_get_phase() to simplify callers from
the debugfs side.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-2-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/clk.c | 48 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 16 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f0f2b599fd7e..82d96d4071b1 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2660,12 +2660,14 @@ static int clk_core_get_phase(struct clk_core *core)
 {
 	int ret;
 
-	clk_prepare_lock();
+	lockdep_assert_held(&prepare_lock);
+	if (!core->ops->get_phase)
+		return 0;
+
 	/* Always try to update cached phase if possible */
-	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	ret = core->phase;
-	clk_prepare_unlock();
+	ret = core->ops->get_phase(core->hw);
+	if (ret >= 0)
+		core->phase = ret;
 
 	return ret;
 }
@@ -2679,10 +2681,16 @@ static int clk_core_get_phase(struct clk_core *core)
  */
 int clk_get_phase(struct clk *clk)
 {
+	int ret;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_phase(clk->core);
+	clk_prepare_lock();
+	ret = clk_core_get_phase(clk->core);
+	clk_prepare_unlock();
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(clk_get_phase);
 
@@ -2896,13 +2904,21 @@ static struct hlist_head *orphan_list[] = {
 static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 				 int level)
 {
-	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n",
+	int phase;
+
+	seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu ",
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, c->protect_count,
-		   clk_core_get_rate(c), clk_core_get_accuracy(c),
-		   clk_core_get_phase(c),
-		   clk_core_get_scaled_duty_cycle(c, 100000));
+		   clk_core_get_rate(c), clk_core_get_accuracy(c));
+
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "%5d", phase);
+	else
+		seq_puts(s, "-----");
+
+	seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000));
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2939,6 +2955,7 @@ DEFINE_SHOW_ATTRIBUTE(clk_summary);
 
 static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 {
+	int phase;
 	unsigned long min_rate, max_rate;
 
 	clk_core_get_boundaries(c, &min_rate, &max_rate);
@@ -2952,7 +2969,9 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 	seq_printf(s, "\"min_rate\": %lu,", min_rate);
 	seq_printf(s, "\"max_rate\": %lu,", max_rate);
 	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
-	seq_printf(s, "\"phase\": %d,", clk_core_get_phase(c));
+	phase = clk_core_get_phase(c);
+	if (phase >= 0)
+		seq_printf(s, "\"phase\": %d,", phase);
 	seq_printf(s, "\"duty_cycle\": %u",
 		   clk_core_get_scaled_duty_cycle(c, 100000));
 }
@@ -3434,14 +3453,11 @@ static int __clk_core_init(struct clk_core *core)
 		core->accuracy = 0;
 
 	/*
-	 * Set clk's phase.
+	 * Set clk's phase by clk_core_get_phase() caching the phase.
 	 * Since a phase is by definition relative to its parent, just
 	 * query the current clock phase, or just assume it's in phase.
 	 */
-	if (core->ops->get_phase)
-		core->phase = core->ops->get_phase(core->hw);
-	else
-		core->phase = 0;
+	clk_core_get_phase(core);
 
 	/*
 	 * Set clk's duty cycle.
-- 
cgit v1.2.3-59-g8ed1b


From 768a5d4f63c29d3bed5abb3c187312fcf623fa05 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@kernel.org>
Date: Wed, 5 Feb 2020 15:28:00 -0800
Subject: clk: Use 'parent' to shorten lines in __clk_core_init()

Some lines are getting long in this function. Let's move 'parent' up to
the top of the function and use it in many places whenever there is a
parent for a clk. This shortens some lines by avoiding core->parent->
indirections.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-3-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/clk.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 82d96d4071b1..3ddca6084e8e 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3342,6 +3342,7 @@ static void clk_core_reparent_orphans_nolock(void)
 static int __clk_core_init(struct clk_core *core)
 {
 	int ret;
+	struct clk_core *parent;
 	unsigned long rate;
 
 	if (!core)
@@ -3413,7 +3414,7 @@ static int __clk_core_init(struct clk_core *core)
 			goto out;
 	}
 
-	core->parent = __clk_init_parent(core);
+	parent = core->parent = __clk_init_parent(core);
 
 	/*
 	 * Populate core->parent if parent has already been clk_core_init'd. If
@@ -3425,10 +3426,9 @@ static int __clk_core_init(struct clk_core *core)
 	 * clocks and re-parent any that are children of the clock currently
 	 * being clk_init'd.
 	 */
-	if (core->parent) {
-		hlist_add_head(&core->child_node,
-				&core->parent->children);
-		core->orphan = core->parent->orphan;
+	if (parent) {
+		hlist_add_head(&core->child_node, &parent->children);
+		core->orphan = parent->orphan;
 	} else if (!core->num_parents) {
 		hlist_add_head(&core->child_node, &clk_root_list);
 		core->orphan = false;
@@ -3446,9 +3446,9 @@ static int __clk_core_init(struct clk_core *core)
 	 */
 	if (core->ops->recalc_accuracy)
 		core->accuracy = core->ops->recalc_accuracy(core->hw,
-					__clk_get_accuracy(core->parent));
-	else if (core->parent)
-		core->accuracy = core->parent->accuracy;
+					__clk_get_accuracy(parent));
+	else if (parent)
+		core->accuracy = parent->accuracy;
 	else
 		core->accuracy = 0;
 
@@ -3472,9 +3472,9 @@ static int __clk_core_init(struct clk_core *core)
 	 */
 	if (core->ops->recalc_rate)
 		rate = core->ops->recalc_rate(core->hw,
-				clk_core_get_rate_nolock(core->parent));
-	else if (core->parent)
-		rate = core->parent->rate;
+				clk_core_get_rate_nolock(parent));
+	else if (parent)
+		rate = parent->rate;
 	else
 		rate = 0;
 	core->rate = core->req_rate = rate;
-- 
cgit v1.2.3-59-g8ed1b


From 0daa376d832f4ce585f153efee4233b52fa3fe58 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@kernel.org>
Date: Wed, 5 Feb 2020 15:28:01 -0800
Subject: clk: Move rate and accuracy recalc to mostly consumer APIs

There's some confusion about when recalc is done for the rate and
accuracy clk consumer APIs in relation to the prepare lock being taken.
Oddly enough, we take the lock again in debugfs APIs so that we can call
the internal "clk_core" APIs to get these fields with any necessary
recalculations. Instead of having this confusion, let's introduce a
recalc variant of these two consumer APIs as internal helpers and call
them from the consumer APIs and the debugfs code so that we don't take
the lock more than once.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-4-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/clk.c | 48 ++++++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 3ddca6084e8e..dc8bdfbd6a0c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -488,7 +488,7 @@ unsigned long clk_hw_get_rate(const struct clk_hw *hw)
 }
 EXPORT_SYMBOL_GPL(clk_hw_get_rate);
 
-static unsigned long __clk_get_accuracy(struct clk_core *core)
+static unsigned long clk_core_get_accuracy_no_lock(struct clk_core *core)
 {
 	if (!core)
 		return 0;
@@ -1517,18 +1517,12 @@ static void __clk_recalc_accuracies(struct clk_core *core)
 		__clk_recalc_accuracies(child);
 }
 
-static long clk_core_get_accuracy(struct clk_core *core)
+static long clk_core_get_accuracy_recalc(struct clk_core *core)
 {
-	unsigned long accuracy;
-
-	clk_prepare_lock();
 	if (core && (core->flags & CLK_GET_ACCURACY_NOCACHE))
 		__clk_recalc_accuracies(core);
 
-	accuracy = __clk_get_accuracy(core);
-	clk_prepare_unlock();
-
-	return accuracy;
+	return clk_core_get_accuracy_no_lock(core);
 }
 
 /**
@@ -1542,10 +1536,16 @@ static long clk_core_get_accuracy(struct clk_core *core)
  */
 long clk_get_accuracy(struct clk *clk)
 {
+	long accuracy;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_accuracy(clk->core);
+	clk_prepare_lock();
+	accuracy = clk_core_get_accuracy_recalc(clk->core);
+	clk_prepare_unlock();
+
+	return accuracy;
 }
 EXPORT_SYMBOL_GPL(clk_get_accuracy);
 
@@ -1599,19 +1599,12 @@ static void __clk_recalc_rates(struct clk_core *core, unsigned long msg)
 		__clk_recalc_rates(child, msg);
 }
 
-static unsigned long clk_core_get_rate(struct clk_core *core)
+static unsigned long clk_core_get_rate_recalc(struct clk_core *core)
 {
-	unsigned long rate;
-
-	clk_prepare_lock();
-
 	if (core && (core->flags & CLK_GET_RATE_NOCACHE))
 		__clk_recalc_rates(core, 0);
 
-	rate = clk_core_get_rate_nolock(core);
-	clk_prepare_unlock();
-
-	return rate;
+	return clk_core_get_rate_nolock(core);
 }
 
 /**
@@ -1624,10 +1617,16 @@ static unsigned long clk_core_get_rate(struct clk_core *core)
  */
 unsigned long clk_get_rate(struct clk *clk)
 {
+	unsigned long rate;
+
 	if (!clk)
 		return 0;
 
-	return clk_core_get_rate(clk->core);
+	clk_prepare_lock();
+	rate = clk_core_get_rate_recalc(clk->core);
+	clk_prepare_unlock();
+
+	return rate;
 }
 EXPORT_SYMBOL_GPL(clk_get_rate);
 
@@ -2910,7 +2909,8 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, c->protect_count,
-		   clk_core_get_rate(c), clk_core_get_accuracy(c));
+		   clk_core_get_rate_recalc(c),
+		   clk_core_get_accuracy_recalc(c));
 
 	phase = clk_core_get_phase(c);
 	if (phase >= 0)
@@ -2965,10 +2965,10 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
 	seq_printf(s, "\"enable_count\": %d,", c->enable_count);
 	seq_printf(s, "\"prepare_count\": %d,", c->prepare_count);
 	seq_printf(s, "\"protect_count\": %d,", c->protect_count);
-	seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c));
+	seq_printf(s, "\"rate\": %lu,", clk_core_get_rate_recalc(c));
 	seq_printf(s, "\"min_rate\": %lu,", min_rate);
 	seq_printf(s, "\"max_rate\": %lu,", max_rate);
-	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
+	seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy_recalc(c));
 	phase = clk_core_get_phase(c);
 	if (phase >= 0)
 		seq_printf(s, "\"phase\": %d,", phase);
@@ -3446,7 +3446,7 @@ static int __clk_core_init(struct clk_core *core)
 	 */
 	if (core->ops->recalc_accuracy)
 		core->accuracy = core->ops->recalc_accuracy(core->hw,
-					__clk_get_accuracy(parent));
+					clk_core_get_accuracy_no_lock(parent));
 	else if (parent)
 		core->accuracy = parent->accuracy;
 	else
-- 
cgit v1.2.3-59-g8ed1b


From 2760878662a290ac57cff8a5a8d8bda8f4dddc37 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@kernel.org>
Date: Wed, 5 Feb 2020 15:28:02 -0800
Subject: clk: Bail out when calculating phase fails during clk registration

Bail out of clk registration if we fail to get the phase for a clk that
has a clk_ops::get_phase() callback. Print a warning too so that driver
authors can easily figure out that some clk is unable to read back phase
information at boot.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200205232802.29184-5-sboyd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/clk.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index dc8bdfbd6a0c..ed1797857bae 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3457,7 +3457,12 @@ static int __clk_core_init(struct clk_core *core)
 	 * Since a phase is by definition relative to its parent, just
 	 * query the current clock phase, or just assume it's in phase.
 	 */
-	clk_core_get_phase(core);
+	ret = clk_core_get_phase(core);
+	if (ret < 0) {
+		pr_warn("%s: Failed to get phase for clk '%s'\n", __func__,
+			core->name);
+		goto out;
+	}
 
 	/*
 	 * Set clk's duty cycle.
-- 
cgit v1.2.3-59-g8ed1b


From 5bf7f4a249387a6062b9a14c8a77e7ba2fd6a53b Mon Sep 17 00:00:00 2001
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Date: Fri, 31 Jan 2020 13:58:16 +0200
Subject: clk: at91: sam9x60: Don't use audio PLL

On sam9x60, there is not audio PLL and so I2S and classD have to use one
of the best matching parents for their generated clock.

Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lkml.kernel.org/r/20200131115816.12483-1-codrin.ciubotariu@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/sam9x60.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index 77398aefeb6d..bacb32c15b26 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -124,7 +124,6 @@ static const struct {
 	char *n;
 	u8 id;
 	struct clk_range r;
-	bool pll;
 } sam9x60_gck[] = {
 	{ .n = "flex0_gclk",  .id = 5, },
 	{ .n = "flex1_gclk",  .id = 6, },
@@ -144,11 +143,9 @@ static const struct {
 	{ .n = "sdmmc1_gclk", .id = 26, .r = { .min = 0, .max = 105000000 }, },
 	{ .n = "flex11_gclk", .id = 32, },
 	{ .n = "flex12_gclk", .id = 33, },
-	{ .n = "i2s_gclk",    .id = 34, .r = { .min = 0, .max = 105000000 },
-		.pll = true, },
+	{ .n = "i2s_gclk",    .id = 34, .r = { .min = 0, .max = 105000000 }, },
 	{ .n = "pit64b_gclk", .id = 37, },
-	{ .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 },
-		.pll = true, },
+	{ .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 }, },
 	{ .n = "tcb1_gclk",   .id = 45, },
 	{ .n = "dbgu_gclk",   .id = 47, },
 };
@@ -290,7 +287,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
 						 sam9x60_gck[i].n,
 						 parent_names, 6,
 						 sam9x60_gck[i].id,
-						 sam9x60_gck[i].pll,
+						 false,
 						 &sam9x60_gck[i].r);
 		if (IS_ERR(hw))
 			goto err_free;
-- 
cgit v1.2.3-59-g8ed1b


From b0ecf1c6c6e82da4847900fad0272abfd014666d Mon Sep 17 00:00:00 2001
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Fri, 17 Jan 2020 13:36:46 +0200
Subject: clk: at91: usb: continue if clk_hw_round_rate() return zero

clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
controlled by clk-sam9x60-pll.c driver. The round rate function for this
driver is sam9x60_pll_round_rate() which call in turn
sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
proper range (rate < characteristics->output[0].min &&
rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
return a negative number to its caller (called by
clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
case a negative number is returned by clk_core_round_rate_nolock(). With
this, the USB clock will continue its rate computation even caller of
clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
may not chose the best parent. I detected this after a suspend/resume
cycle on SAM9X60.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/clk-usb.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 22aede42a336..3c0bd7e51b09 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -75,6 +75,9 @@ static int at91sam9x5_clk_usb_determine_rate(struct clk_hw *hw,
 			tmp_parent_rate = req->rate * div;
 			tmp_parent_rate = clk_hw_round_rate(parent,
 							   tmp_parent_rate);
+			if (!tmp_parent_rate)
+				continue;
+
 			tmp_rate = DIV_ROUND_CLOSEST(tmp_parent_rate, div);
 			if (tmp_rate < req->rate)
 				tmp_diff = req->rate - tmp_rate;
-- 
cgit v1.2.3-59-g8ed1b


From 43b203d32b77d1b1b2209e22837f49767020553e Mon Sep 17 00:00:00 2001
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Fri, 17 Jan 2020 13:36:47 +0200
Subject: clk: at91: sam9x60: fix usb clock parents

SAM9X60's USB clock has 3 parents: plla, upll and main_osc.

Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-3-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/sam9x60.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index bacb32c15b26..cc19e8fb83be 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -234,9 +234,8 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
 
 	parent_names[0] = "pllack";
 	parent_names[1] = "upllck";
-	parent_names[2] = "mainck";
-	parent_names[3] = "mainck";
-	hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 4);
+	parent_names[2] = "main_osc";
+	hw = sam9x60_clk_register_usb(regmap, "usbck", parent_names, 3);
 	if (IS_ERR(hw))
 		goto err_free;
 
-- 
cgit v1.2.3-59-g8ed1b


From d7a83d67a1694c42cc95fc0755d823f7ca3bfcfb Mon Sep 17 00:00:00 2001
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Fri, 17 Jan 2020 13:36:48 +0200
Subject: clk: at91: usb: use proper usbs_mask

Use usbs_mask passed as argument. The usbs_mask is different for
SAM9X60.

Fixes: 2423eeaead6f8 ("clk: at91: usb: Add sam9x60 support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-4-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/clk-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 3c0bd7e51b09..c0895c993cce 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -214,7 +214,7 @@ _at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
 
 	usb->hw.init = &init;
 	usb->regmap = regmap;
-	usb->usbs_mask = SAM9X5_USBS_MASK;
+	usb->usbs_mask = usbs_mask;
 
 	hw = &usb->hw;
 	ret = clk_hw_register(NULL, &usb->hw);
-- 
cgit v1.2.3-59-g8ed1b


From 9962fb0d19958215b5bc6b9279f824b55aabdec2 Mon Sep 17 00:00:00 2001
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Fri, 17 Jan 2020 13:36:49 +0200
Subject: clk: at91: usb: introduce num_parents in driver's structure

SAM9X60 USB clock may have up to 3 parents. Save the number of parents in
driver's data structure and validate against it when setting parent.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-5-git-send-email-claudiu.beznea@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/clk-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index c0895c993cce..31d5c45e30d7 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -25,6 +25,7 @@ struct at91sam9x5_clk_usb {
 	struct clk_hw hw;
 	struct regmap *regmap;
 	u32 usbs_mask;
+	u8 num_parents;
 };
 
 #define to_at91sam9x5_clk_usb(hw) \
@@ -110,7 +111,7 @@ static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index)
 {
 	struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
 
-	if (index > 1)
+	if (index >= usb->num_parents)
 		return -EINVAL;
 
 	regmap_update_bits(usb->regmap, AT91_PMC_USB, usb->usbs_mask, index);
@@ -215,6 +216,7 @@ _at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
 	usb->hw.init = &init;
 	usb->regmap = regmap;
 	usb->usbs_mask = usbs_mask;
+	usb->num_parents = num_parents;
 
 	hw = &usb->hw;
 	ret = clk_hw_register(NULL, &usb->hw);
-- 
cgit v1.2.3-59-g8ed1b


From 12dc8d3be9d86cccc35dcf32828d3a8e9d48e0d1 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: Fri, 17 Jan 2020 22:05:29 +0100
Subject: clk: at91: add at91sam9g45 pmc driver

Add a driver for the PMC clocks of the at91sam9g45 family.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20200117210529.17490-1-alexandre.belloni@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/Makefile      |   1 +
 drivers/clk/at91/at91sam9g45.c | 220 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 221 insertions(+)
 create mode 100644 drivers/clk/at91/at91sam9g45.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 3732241352ce..c02c53a0e02e 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_HAVE_AT91_GENERATED_CLK)	+= clk-generated.o
 obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK)	+= clk-i2s-mux.o
 obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
 obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
 obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
 obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
new file mode 100644
index 000000000000..38a7d2d2df0c
--- /dev/null
+++ b/drivers/clk/at91/at91sam9g45.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+	.output = { .min = 0, .max = 133333333 },
+	.divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 };
+
+static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 };
+
+static const struct clk_range plla_outputs[] = {
+	{ .min = 745000000, .max = 800000000 },
+	{ .min = 695000000, .max = 750000000 },
+	{ .min = 645000000, .max = 700000000 },
+	{ .min = 595000000, .max = 650000000 },
+	{ .min = 545000000, .max = 600000000 },
+	{ .min = 495000000, .max = 555000000 },
+	{ .min = 445000000, .max = 500000000 },
+	{ .min = 400000000, .max = 450000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+	.input = { .min = 2000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(plla_outputs),
+	.output = plla_outputs,
+	.icpll = plla_icpll,
+	.out = plla_out,
+};
+
+static const struct {
+	char *n;
+	char *p;
+	u8 id;
+} at91sam9g45_systemck[] = {
+	{ .n = "ddrck", .p = "masterck", .id = 2 },
+	{ .n = "uhpck", .p = "usbck",    .id = 6 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+};
+
+static const struct clk_pcr_layout at91sam9g45_pcr_layout = {
+	.offset = 0x10c,
+	.cmd = BIT(12),
+	.pid_mask = GENMASK(5, 0),
+	.div_mask = GENMASK(17, 16),
+};
+
+struct pck {
+	char *n;
+	u8 id;
+};
+
+static const struct pck at91sam9g45_periphck[] = {
+	{ .n = "pioA_clk",       .id = 2, },
+	{ .n = "pioB_clk",       .id = 3, },
+	{ .n = "pioC_clk",       .id = 4, },
+	{ .n = "pioDE_clk",      .id = 5, },
+	{ .n = "trng_clk",       .id = 6, },
+	{ .n = "usart0_clk",     .id = 7, },
+	{ .n = "usart1_clk",     .id = 8, },
+	{ .n = "usart2_clk",     .id = 9, },
+	{ .n = "usart3_clk",     .id = 10, },
+	{ .n = "mci0_clk",       .id = 11, },
+	{ .n = "twi0_clk",       .id = 12, },
+	{ .n = "twi1_clk",       .id = 13, },
+	{ .n = "spi0_clk",       .id = 14, },
+	{ .n = "spi1_clk",       .id = 15, },
+	{ .n = "ssc0_clk",       .id = 16, },
+	{ .n = "ssc1_clk",       .id = 17, },
+	{ .n = "tcb0_clk",       .id = 18, },
+	{ .n = "pwm_clk",        .id = 19, },
+	{ .n = "adc_clk",        .id = 20, },
+	{ .n = "dma0_clk",       .id = 21, },
+	{ .n = "uhphs_clk",      .id = 22, },
+	{ .n = "lcd_clk",        .id = 23, },
+	{ .n = "ac97_clk",       .id = 24, },
+	{ .n = "macb0_clk",      .id = 25, },
+	{ .n = "isi_clk",        .id = 26, },
+	{ .n = "udphs_clk",      .id = 27, },
+	{ .n = "aestdessha_clk", .id = 28, },
+	{ .n = "mci1_clk",       .id = 29, },
+	{ .n = "vdec_clk",       .id = 30, },
+};
+
+static void __init at91sam9g45_pmc_setup(struct device_node *np)
+{
+	const char *slck_name, *mainxtal_name;
+	struct pmc_data *at91sam9g45_pmc;
+	const char *parent_names[6];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_clk");
+	if (i < 0)
+		return;
+
+	slck_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	at91sam9g45_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					    nck(at91sam9g45_systemck),
+					    nck(at91sam9g45_periphck), 0);
+	if (!at91sam9g45_pmc)
+		return;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_rm9200_main(regmap, "mainck", "main_osc");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9g45_pmc->chws[PMC_MAIN] = hw;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &at91rm9200_pll_layout, &plla_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9g45_pmc->chws[PMC_UTMI] = hw;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91rm9200_master_layout,
+				      &mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9g45_pmc->chws[PMC_MCK] = hw;
+
+	parent_names[0] = "plladivck";
+	parent_names[1] = "utmick";
+	hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	parent_names[4] = "masterck";
+	for (i = 0; i < 2; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 5, i,
+						    &at91sam9g45_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9g45_systemck); i++) {
+		hw = at91_clk_register_system(regmap, at91sam9g45_systemck[i].n,
+					      at91sam9g45_systemck[i].p,
+					      at91sam9g45_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9g45_pmc->shws[at91sam9g45_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9g45_periphck); i++) {
+		hw = at91_clk_register_peripheral(regmap,
+						  at91sam9g45_periphck[i].n,
+						  "masterck",
+						  at91sam9g45_periphck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9g45_pmc->phws[at91sam9g45_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9g45_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(at91sam9g45_pmc);
+}
+/*
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
+		      at91sam9g45_pmc_setup);
-- 
cgit v1.2.3-59-g8ed1b


From 0969b242f7b8e5de0a1c28f81d8558fd678c066d Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: Fri, 10 Jan 2020 23:30:33 +0100
Subject: clk: at91: add sama5d3 pmc driver

Add a driver for the PMC clocks of the sama5d3.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20200110223033.1261791-1-alexandre.belloni@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/Makefile  |   1 +
 drivers/clk/at91/sama5d3.c | 240 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 241 insertions(+)
 create mode 100644 drivers/clk/at91/sama5d3.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index c02c53a0e02e..54a94c32d972 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -18,5 +18,6 @@ obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
 obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
+obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
 obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
 obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
new file mode 100644
index 000000000000..88506f909c08
--- /dev/null
+++ b/drivers/clk/at91/sama5d3.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+	.output = { .min = 0, .max = 166000000 },
+	.divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0 };
+
+static u16 plla_icpll[] = { 0 };
+
+static const struct clk_range plla_outputs[] = {
+	{ .min = 400000000, .max = 1000000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+	.input = { .min = 8000000, .max = 50000000 },
+	.num_output = ARRAY_SIZE(plla_outputs),
+	.output = plla_outputs,
+	.icpll = plla_icpll,
+	.out = plla_out,
+};
+
+static const struct clk_pcr_layout sama5d3_pcr_layout = {
+	.offset = 0x10c,
+	.cmd = BIT(12),
+	.pid_mask = GENMASK(6, 0),
+	.div_mask = GENMASK(17, 16),
+};
+
+static const struct {
+	char *n;
+	char *p;
+	u8 id;
+} sama5d3_systemck[] = {
+	{ .n = "ddrck", .p = "masterck", .id = 2 },
+	{ .n = "lcdck", .p = "masterck", .id = 3 },
+	{ .n = "smdck", .p = "smdclk",   .id = 4 },
+	{ .n = "uhpck", .p = "usbck",    .id = 6 },
+	{ .n = "udpck", .p = "usbck",    .id = 7 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+	{ .n = "pck2",  .p = "prog2",    .id = 10 },
+};
+
+static const struct {
+	char *n;
+	u8 id;
+	struct clk_range r;
+} sama5d3_periphck[] = {
+	{ .n = "dbgu_clk", .id = 2, },
+	{ .n = "hsmc_clk", .id = 5, },
+	{ .n = "pioA_clk", .id = 6, },
+	{ .n = "pioB_clk", .id = 7, },
+	{ .n = "pioC_clk", .id = 8, },
+	{ .n = "pioD_clk", .id = 9, },
+	{ .n = "pioE_clk", .id = 10, },
+	{ .n = "usart0_clk", .id = 12, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "usart1_clk", .id = 13, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "usart2_clk", .id = 14, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "usart3_clk", .id = 15, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "uart0_clk", .id = 16, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "uart1_clk", .id = 17, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "twi0_clk", .id = 18, .r = { .min = 0, .max = 41500000 }, },
+	{ .n = "twi1_clk", .id = 19, .r = { .min = 0, .max = 41500000 }, },
+	{ .n = "twi2_clk", .id = 20, .r = { .min = 0, .max = 41500000 }, },
+	{ .n = "mci0_clk", .id = 21, },
+	{ .n = "mci1_clk", .id = 22, },
+	{ .n = "mci2_clk", .id = 23, },
+	{ .n = "spi0_clk", .id = 24, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "spi1_clk", .id = 25, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "tcb0_clk", .id = 26, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "tcb1_clk", .id = 27, .r = { .min = 0, .max = 166000000 }, },
+	{ .n = "pwm_clk", .id = 28, },
+	{ .n = "adc_clk", .id = 29, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "dma0_clk", .id = 30, },
+	{ .n = "dma1_clk", .id = 31, },
+	{ .n = "uhphs_clk", .id = 32, },
+	{ .n = "udphs_clk", .id = 33, },
+	{ .n = "macb0_clk", .id = 34, },
+	{ .n = "macb1_clk", .id = 35, },
+	{ .n = "lcdc_clk", .id = 36, },
+	{ .n = "isi_clk", .id = 37, },
+	{ .n = "ssc0_clk", .id = 38, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "ssc1_clk", .id = 39, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "can0_clk", .id = 40, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "can1_clk", .id = 41, .r = { .min = 0, .max = 83000000 }, },
+	{ .n = "sha_clk", .id = 42, },
+	{ .n = "aes_clk", .id = 43, },
+	{ .n = "tdes_clk", .id = 44, },
+	{ .n = "trng_clk", .id = 45, },
+	{ .n = "fuse_clk", .id = 48, },
+	{ .n = "mpddr_clk", .id = 49, },
+};
+
+static void __init sama5d3_pmc_setup(struct device_node *np)
+{
+	const char *slck_name, *mainxtal_name;
+	struct pmc_data *sama5d3_pmc;
+	const char *parent_names[5];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_clk");
+	if (i < 0)
+		return;
+
+	slck_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	sama5d3_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					nck(sama5d3_systemck),
+					nck(sama5d3_periphck), 0);
+	if (!sama5d3_pmc)
+		return;
+
+	hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+					   50000000);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = "main_rc_osc";
+	parent_names[1] = "main_osc";
+	hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &sama5d3_pll_layout, &plla_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	sama5d3_pmc->chws[PMC_UTMI] = hw;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91sam9x5_master_layout,
+				      &mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	sama5d3_pmc->chws[PMC_MCK] = hw;
+
+	parent_names[0] = "plladivck";
+	parent_names[1] = "utmick";
+	hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "utmick";
+	parent_names[4] = "masterck";
+	for (i = 0; i < 3; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 5, i,
+						    &at91sam9x5_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sama5d3_systemck); i++) {
+		hw = at91_clk_register_system(regmap, sama5d3_systemck[i].n,
+					      sama5d3_systemck[i].p,
+					      sama5d3_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		sama5d3_pmc->shws[sama5d3_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sama5d3_periphck); i++) {
+		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+							 &sama5d3_pcr_layout,
+							 sama5d3_periphck[i].n,
+							 "masterck",
+							 sama5d3_periphck[i].id,
+							 &sama5d3_periphck[i].r);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		sama5d3_pmc->phws[sama5d3_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d3_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(sama5d3_pmc);
+}
+/*
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
-- 
cgit v1.2.3-59-g8ed1b


From 143e04dab6b4c73c66b1708f6bc3212b9cb71dbb Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: Thu, 16 Jan 2020 18:23:16 +0100
Subject: clk: at91: add at91sam9n12 pmc driver

Add a driver for the PMC clocks of the at91sam9n12 family.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20200116172316.426703-1-alexandre.belloni@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/Makefile      |   1 +
 drivers/clk/at91/at91sam9n12.c | 238 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 239 insertions(+)
 create mode 100644 drivers/clk/at91/at91sam9n12.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 54a94c32d972..7ab244f346c4 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK)	+= clk-i2s-mux.o
 obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o
 obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
 obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
 obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
new file mode 100644
index 000000000000..8bb39d2ba84b
--- /dev/null
+++ b/drivers/clk/at91/at91sam9n12.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+	.output = { .min = 0, .max = 133333333 },
+	.divisors = { 1, 2, 4, 3 },
+	.have_div3_pres = 1,
+};
+
+static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 };
+
+static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 };
+
+static const struct clk_range plla_outputs[] = {
+	{ .min = 745000000, .max = 800000000 },
+	{ .min = 695000000, .max = 750000000 },
+	{ .min = 645000000, .max = 700000000 },
+	{ .min = 595000000, .max = 650000000 },
+	{ .min = 545000000, .max = 600000000 },
+	{ .min = 495000000, .max = 555000000 },
+	{ .min = 445000000, .max = 500000000 },
+	{ .min = 400000000, .max = 450000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+	.input = { .min = 2000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(plla_outputs),
+	.output = plla_outputs,
+	.icpll = plla_icpll,
+	.out = plla_out,
+};
+
+static u8 pllb_out[] = { 0 };
+
+static const struct clk_range pllb_outputs[] = {
+	{ .min = 30000000, .max = 100000000 },
+};
+
+static const struct clk_pll_characteristics pllb_characteristics = {
+	.input = { .min = 2000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(pllb_outputs),
+	.output = pllb_outputs,
+	.out = pllb_out,
+};
+
+static const struct {
+	char *n;
+	char *p;
+	u8 id;
+} at91sam9n12_systemck[] = {
+	{ .n = "ddrck", .p = "masterck", .id = 2 },
+	{ .n = "lcdck", .p = "masterck", .id = 3 },
+	{ .n = "uhpck", .p = "usbck",    .id = 6 },
+	{ .n = "udpck", .p = "usbck",    .id = 7 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+};
+
+static const struct clk_pcr_layout at91sam9n12_pcr_layout = {
+	.offset = 0x10c,
+	.cmd = BIT(12),
+	.pid_mask = GENMASK(5, 0),
+	.div_mask = GENMASK(17, 16),
+};
+
+struct pck {
+	char *n;
+	u8 id;
+};
+
+static const struct pck at91sam9n12_periphck[] = {
+	{ .n = "pioAB_clk",  .id = 2, },
+	{ .n = "pioCD_clk",  .id = 3, },
+	{ .n = "fuse_clk",   .id = 4, },
+	{ .n = "usart0_clk", .id = 5, },
+	{ .n = "usart1_clk", .id = 6, },
+	{ .n = "usart2_clk", .id = 7, },
+	{ .n = "usart3_clk", .id = 8, },
+	{ .n = "twi0_clk",   .id = 9, },
+	{ .n = "twi1_clk",   .id = 10, },
+	{ .n = "mci0_clk",   .id = 12, },
+	{ .n = "spi0_clk",   .id = 13, },
+	{ .n = "spi1_clk",   .id = 14, },
+	{ .n = "uart0_clk",  .id = 15, },
+	{ .n = "uart1_clk",  .id = 16, },
+	{ .n = "tcb_clk",    .id = 17, },
+	{ .n = "pwm_clk",    .id = 18, },
+	{ .n = "adc_clk",    .id = 19, },
+	{ .n = "dma0_clk",   .id = 20, },
+	{ .n = "uhphs_clk",  .id = 22, },
+	{ .n = "udphs_clk",  .id = 23, },
+	{ .n = "lcdc_clk",   .id = 25, },
+	{ .n = "sha_clk",    .id = 27, },
+	{ .n = "ssc0_clk",   .id = 28, },
+	{ .n = "aes_clk",    .id = 29, },
+	{ .n = "trng_clk",   .id = 30, },
+};
+
+static void __init at91sam9n12_pmc_setup(struct device_node *np)
+{
+	struct clk_range range = CLK_RANGE(0, 0);
+	const char *slck_name, *mainxtal_name;
+	struct pmc_data *at91sam9n12_pmc;
+	const char *parent_names[6];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_clk");
+	if (i < 0)
+		return;
+
+	slck_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	at91sam9n12_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					   nck(at91sam9n12_systemck), 31, 0);
+	if (!at91sam9n12_pmc)
+		return;
+
+	hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+					   50000000);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = "main_rc_osc";
+	parent_names[1] = "main_osc";
+	hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9n12_pmc->chws[PMC_MAIN] = hw;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &at91rm9200_pll_layout, &plla_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_pll(regmap, "pllbck", "mainck", 1,
+				   &at91rm9200_pll_layout, &pllb_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "pllbck";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91sam9x5_master_layout,
+				      &mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91sam9n12_pmc->chws[PMC_MCK] = hw;
+
+	hw = at91sam9n12_clk_register_usb(regmap, "usbck", "pllbck");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slck_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "plladivck";
+	parent_names[3] = "pllbck";
+	parent_names[4] = "masterck";
+	for (i = 0; i < 2; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 5, i,
+						    &at91sam9x5_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9n12_systemck); i++) {
+		hw = at91_clk_register_system(regmap, at91sam9n12_systemck[i].n,
+					      at91sam9n12_systemck[i].p,
+					      at91sam9n12_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9n12_pmc->shws[at91sam9n12_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91sam9n12_periphck); i++) {
+		hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+							 &at91sam9n12_pcr_layout,
+							 at91sam9n12_periphck[i].n,
+							 "masterck",
+							 at91sam9n12_periphck[i].id,
+							 &range);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91sam9n12_pmc->phws[at91sam9n12_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9n12_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(at91sam9n12_pmc);
+}
+/*
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
+		      at91sam9n12_pmc_setup);
-- 
cgit v1.2.3-59-g8ed1b


From 8d7a577d04e8ce24b1b81ee44ec8cd1dda2a9cd9 Mon Sep 17 00:00:00 2001
From: Aditya Pakki <pakki001@umn.edu>
Date: Tue, 21 Jan 2020 17:33:49 -0600
Subject: clk: samsung: Remove redundant check in samsung_cmu_register_one

Consistent with other instances of samsung_clk_init, the check
if ctx is NULL is redundant. The function currently does not
return NULL.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Link: https://lkml.kernel.org/r/20200121233349.28627-1-pakki001@umn.edu
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/samsung/clk.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c
index dad31308c071..1949ae7851b2 100644
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
@@ -356,10 +356,6 @@ struct samsung_clk_provider * __init samsung_cmu_register_one(
 	}
 
 	ctx = samsung_clk_init(np, reg_base, cmu->nr_clk_ids);
-	if (!ctx) {
-		panic("%s: unable to allocate ctx\n", __func__);
-		return ctx;
-	}
 
 	if (cmu->pll_clks)
 		samsung_clk_register_pll(ctx, cmu->pll_clks, cmu->nr_pll_clks,
-- 
cgit v1.2.3-59-g8ed1b


From be545c79b28917caa0cee231f376be2a2e5c9d0e Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Fri, 6 Dec 2019 14:34:14 +0100
Subject: clk: Fix continuation of of_clk_detect_critical()

The second line of the of_clk_detect_critical() function signature is
not indented according to coding style.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lkml.kernel.org/r/20191206133414.23925-1-geert+renesas@glider.be
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/clk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f0f2b599fd7e..e42145cd996a 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -4865,8 +4865,8 @@ static int parent_ready(struct device_node *np)
  *
  * Return: error code or zero on success
  */
-int of_clk_detect_critical(struct device_node *np,
-					  int index, unsigned long *flags)
+int of_clk_detect_critical(struct device_node *np, int index,
+			   unsigned long *flags)
 {
 	struct property *prop;
 	const __be32 *cur;
-- 
cgit v1.2.3-59-g8ed1b


From cc26ed7be46c5f5fa45f3df8161ed7ca3c4d318c Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@kernel.org>
Date: Tue, 14 Jan 2020 10:07:25 -0600
Subject: clk: stratix10: use do_div() for 64-bit calculation

do_div() macro to perform u64 division and guards against overflow if
the result is too large for the unsigned long return type.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200114160726.19771-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/socfpga/clk-pll-s10.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/socfpga/clk-pll-s10.c b/drivers/clk/socfpga/clk-pll-s10.c
index 4705eb544f01..8d7b1d0c4664 100644
--- a/drivers/clk/socfpga/clk-pll-s10.c
+++ b/drivers/clk/socfpga/clk-pll-s10.c
@@ -39,7 +39,9 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hwclk,
 	/* read VCO1 reg for numerator and denominator */
 	reg = readl(socfpgaclk->hw.reg);
 	refdiv = (reg & SOCFPGA_PLL_REFDIV_MASK) >> SOCFPGA_PLL_REFDIV_SHIFT;
-	vco_freq = (unsigned long long)parent_rate / refdiv;
+
+	vco_freq = parent_rate;
+	do_div(vco_freq, refdiv);
 
 	/* Read mdiv and fdiv from the fdbck register */
 	reg = readl(socfpgaclk->hw.reg + 0x4);
-- 
cgit v1.2.3-59-g8ed1b


From 8c0e783d2c7be2bb75bf233574a3f1ad1e818cb1 Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@kernel.org>
Date: Tue, 14 Jan 2020 10:07:26 -0600
Subject: clk: socfpga: stratix10: simplify parameter passing

Just pass the clock pointer structure to the various register functions.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200114160726.19771-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/socfpga/clk-gate-s10.c   | 40 +++++++++++++++-------------------
 drivers/clk/socfpga/clk-periph-s10.c | 42 ++++++++++++++++++------------------
 drivers/clk/socfpga/clk-pll-s10.c    | 13 +++++------
 drivers/clk/socfpga/clk-s10.c        | 29 ++++---------------------
 drivers/clk/socfpga/stratix10-clk.h  | 25 +++++++--------------
 5 files changed, 57 insertions(+), 92 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/socfpga/clk-gate-s10.c b/drivers/clk/socfpga/clk-gate-s10.c
index 54a464fa63e0..8be4722f6064 100644
--- a/drivers/clk/socfpga/clk-gate-s10.c
+++ b/drivers/clk/socfpga/clk-gate-s10.c
@@ -65,54 +65,49 @@ static const struct clk_ops dbgclk_ops = {
 	.get_parent = socfpga_gate_get_parent,
 };
 
-struct clk *s10_register_gate(const char *name, const char *parent_name,
-			      const char * const *parent_names,
-			      u8 num_parents, unsigned long flags,
-			      void __iomem *regbase, unsigned long gate_reg,
-			      unsigned long gate_idx, unsigned long div_reg,
-			      unsigned long div_offset, u8 div_width,
-			      unsigned long bypass_reg, u8 bypass_shift,
-			      u8 fixed_div)
+struct clk *s10_register_gate(const struct stratix10_gate_clock *clks, void __iomem *regbase)
 {
 	struct clk *clk;
 	struct socfpga_gate_clk *socfpga_clk;
 	struct clk_init_data init;
+	const char * const *parent_names = clks->parent_names;
+	const char *parent_name = clks->parent_name;
 
 	socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL);
 	if (!socfpga_clk)
 		return NULL;
 
-	socfpga_clk->hw.reg = regbase + gate_reg;
-	socfpga_clk->hw.bit_idx = gate_idx;
+	socfpga_clk->hw.reg = regbase + clks->gate_reg;
+	socfpga_clk->hw.bit_idx = clks->gate_idx;
 
 	gateclk_ops.enable = clk_gate_ops.enable;
 	gateclk_ops.disable = clk_gate_ops.disable;
 
-	socfpga_clk->fixed_div = fixed_div;
+	socfpga_clk->fixed_div = clks->fixed_div;
 
-	if (div_reg)
-		socfpga_clk->div_reg = regbase + div_reg;
+	if (clks->div_reg)
+		socfpga_clk->div_reg = regbase + clks->div_reg;
 	else
 		socfpga_clk->div_reg = NULL;
 
-	socfpga_clk->width = div_width;
-	socfpga_clk->shift = div_offset;
+	socfpga_clk->width = clks->div_width;
+	socfpga_clk->shift = clks->div_offset;
 
-	if (bypass_reg)
-		socfpga_clk->bypass_reg = regbase + bypass_reg;
+	if (clks->bypass_reg)
+		socfpga_clk->bypass_reg = regbase + clks->bypass_reg;
 	else
 		socfpga_clk->bypass_reg = NULL;
-	socfpga_clk->bypass_shift = bypass_shift;
+	socfpga_clk->bypass_shift = clks->bypass_shift;
 
-	if (streq(name, "cs_pdbg_clk"))
+	if (streq(clks->name, "cs_pdbg_clk"))
 		init.ops = &dbgclk_ops;
 	else
 		init.ops = &gateclk_ops;
 
-	init.name = name;
-	init.flags = flags;
+	init.name = clks->name;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names ? parent_names : &parent_name;
 	socfpga_clk->hw.hw.init = &init;
 
@@ -121,6 +116,5 @@ struct clk *s10_register_gate(const char *name, const char *parent_name,
 		kfree(socfpga_clk);
 		return NULL;
 	}
-
 	return clk;
 }
diff --git a/drivers/clk/socfpga/clk-periph-s10.c b/drivers/clk/socfpga/clk-periph-s10.c
index 1a191eeeebba..dd6d4056e9de 100644
--- a/drivers/clk/socfpga/clk-periph-s10.c
+++ b/drivers/clk/socfpga/clk-periph-s10.c
@@ -73,26 +73,27 @@ static const struct clk_ops peri_cnt_clk_ops = {
 	.get_parent = clk_periclk_get_parent,
 };
 
-struct clk *s10_register_periph(const char *name, const char *parent_name,
-				const char * const *parent_names,
-				u8 num_parents, unsigned long flags,
-				void __iomem *reg, unsigned long offset)
+struct clk *s10_register_periph(const struct stratix10_perip_c_clock *clks,
+				void __iomem *reg)
 {
 	struct clk *clk;
 	struct socfpga_periph_clk *periph_clk;
 	struct clk_init_data init;
+	const char *name = clks->name;
+	const char *parent_name = clks->parent_name;
+	const char * const *parent_names = clks->parent_names;
 
 	periph_clk = kzalloc(sizeof(*periph_clk), GFP_KERNEL);
 	if (WARN_ON(!periph_clk))
 		return NULL;
 
-	periph_clk->hw.reg = reg + offset;
+	periph_clk->hw.reg = reg + clks->offset;
 
 	init.name = name;
 	init.ops = &peri_c_clk_ops;
-	init.flags = flags;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names ? parent_names : &parent_name;
 
 	periph_clk->hw.hw.init = &init;
@@ -105,38 +106,37 @@ struct clk *s10_register_periph(const char *name, const char *parent_name,
 	return clk;
 }
 
-struct clk *s10_register_cnt_periph(const char *name, const char *parent_name,
-				    const char * const *parent_names,
-				    u8 num_parents, unsigned long flags,
-				    void __iomem *regbase, unsigned long offset,
-				    u8 fixed_divider, unsigned long bypass_reg,
-				    unsigned long bypass_shift)
+struct clk *s10_register_cnt_periph(const struct stratix10_perip_cnt_clock *clks,
+				    void __iomem *regbase)
 {
 	struct clk *clk;
 	struct socfpga_periph_clk *periph_clk;
 	struct clk_init_data init;
+	const char *name = clks->name;
+	const char *parent_name = clks->parent_name;
+	const char * const *parent_names = clks->parent_names;
 
 	periph_clk = kzalloc(sizeof(*periph_clk), GFP_KERNEL);
 	if (WARN_ON(!periph_clk))
 		return NULL;
 
-	if (offset)
-		periph_clk->hw.reg = regbase + offset;
+	if (clks->offset)
+		periph_clk->hw.reg = regbase + clks->offset;
 	else
 		periph_clk->hw.reg = NULL;
 
-	if (bypass_reg)
-		periph_clk->bypass_reg = regbase + bypass_reg;
+	if (clks->bypass_reg)
+		periph_clk->bypass_reg = regbase + clks->bypass_reg;
 	else
 		periph_clk->bypass_reg = NULL;
-	periph_clk->bypass_shift = bypass_shift;
-	periph_clk->fixed_div = fixed_divider;
+	periph_clk->bypass_shift = clks->bypass_shift;
+	periph_clk->fixed_div = clks->fixed_divider;
 
 	init.name = name;
 	init.ops = &peri_cnt_clk_ops;
-	init.flags = flags;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names ? parent_names : &parent_name;
 
 	periph_clk->hw.hw.init = &init;
diff --git a/drivers/clk/socfpga/clk-pll-s10.c b/drivers/clk/socfpga/clk-pll-s10.c
index 8d7b1d0c4664..a301bb22f36c 100644
--- a/drivers/clk/socfpga/clk-pll-s10.c
+++ b/drivers/clk/socfpga/clk-pll-s10.c
@@ -110,19 +110,20 @@ static struct clk_ops clk_boot_ops = {
 	.prepare = clk_pll_prepare,
 };
 
-struct clk *s10_register_pll(const char *name, const char * const *parent_names,
-				    u8 num_parents, unsigned long flags,
-				    void __iomem *reg, unsigned long offset)
+struct clk *s10_register_pll(const struct stratix10_pll_clock *clks,
+			     void __iomem *reg)
 {
 	struct clk *clk;
 	struct socfpga_pll *pll_clk;
 	struct clk_init_data init;
+	const char *name = clks->name;
+	const char * const *parent_names = clks->parent_names;
 
 	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
 	if (WARN_ON(!pll_clk))
 		return NULL;
 
-	pll_clk->hw.reg = reg + offset;
+	pll_clk->hw.reg = reg + clks->offset;
 
 	if (streq(name, SOCFPGA_BOOT_CLK))
 		init.ops = &clk_boot_ops;
@@ -130,9 +131,9 @@ struct clk *s10_register_pll(const char *name, const char * const *parent_names,
 		init.ops = &clk_pll_ops;
 
 	init.name = name;
-	init.flags = flags;
+	init.flags = clks->flags;
 
-	init.num_parents = num_parents;
+	init.num_parents = clks->num_parents;
 	init.parent_names = parent_names;
 	pll_clk->hw.hw.init = &init;
 
diff --git a/drivers/clk/socfpga/clk-s10.c b/drivers/clk/socfpga/clk-s10.c
index 993f3a73c71e..dea7c6c7d269 100644
--- a/drivers/clk/socfpga/clk-s10.c
+++ b/drivers/clk/socfpga/clk-s10.c
@@ -177,9 +177,7 @@ static int s10_clk_register_c_perip(const struct stratix10_perip_c_clock *clks,
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_periph(clks[i].name, clks[i].parent_name,
-					  clks[i].parent_names, clks[i].num_parents,
-					  clks[i].flags, base, clks[i].offset);
+		clk = s10_register_periph(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
@@ -198,14 +196,7 @@ static int s10_clk_register_cnt_perip(const struct stratix10_perip_cnt_clock *cl
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_cnt_periph(clks[i].name, clks[i].parent_name,
-					      clks[i].parent_names,
-					      clks[i].num_parents,
-					      clks[i].flags, base,
-					      clks[i].offset,
-					      clks[i].fixed_divider,
-					      clks[i].bypass_reg,
-					      clks[i].bypass_shift);
+		clk = s10_register_cnt_periph(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
@@ -225,16 +216,7 @@ static int s10_clk_register_gate(const struct stratix10_gate_clock *clks,
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_gate(clks[i].name, clks[i].parent_name,
-					clks[i].parent_names,
-					clks[i].num_parents,
-					clks[i].flags, base,
-					clks[i].gate_reg,
-					clks[i].gate_idx, clks[i].div_reg,
-					clks[i].div_offset, clks[i].div_width,
-					clks[i].bypass_reg,
-					clks[i].bypass_shift,
-					clks[i].fixed_div);
+		clk = s10_register_gate(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
@@ -254,10 +236,7 @@ static int s10_clk_register_pll(const struct stratix10_pll_clock *clks,
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = s10_register_pll(clks[i].name, clks[i].parent_names,
-				    clks[i].num_parents,
-				    clks[i].flags, base,
-				    clks[i].offset);
+		clk = s10_register_pll(&clks[i], base);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
diff --git a/drivers/clk/socfpga/stratix10-clk.h b/drivers/clk/socfpga/stratix10-clk.h
index e8e121907952..fcabef42249c 100644
--- a/drivers/clk/socfpga/stratix10-clk.h
+++ b/drivers/clk/socfpga/stratix10-clk.h
@@ -60,21 +60,12 @@ struct stratix10_gate_clock {
 	u8			fixed_div;
 };
 
-struct clk *s10_register_pll(const char *, const char *const *, u8,
-			     unsigned long, void __iomem *, unsigned long);
-
-struct clk *s10_register_periph(const char *, const char *,
-				const char * const *, u8, unsigned long,
-				void __iomem *, unsigned long);
-struct clk *s10_register_cnt_periph(const char *, const char *,
-				    const char * const *, u8,
-				    unsigned long, void __iomem *,
-				    unsigned long, u8, unsigned long,
-				    unsigned long);
-struct clk *s10_register_gate(const char *, const char *,
-			      const char * const *, u8,
-			      unsigned long, void __iomem *,
-			      unsigned long, unsigned long,
-			      unsigned long, unsigned long, u8,
-			      unsigned long, u8, u8);
+struct clk *s10_register_pll(const struct stratix10_pll_clock *,
+			     void __iomem *);
+struct clk *s10_register_periph(const struct stratix10_perip_c_clock *,
+				void __iomem *);
+struct clk *s10_register_cnt_periph(const struct stratix10_perip_cnt_clock *,
+				    void __iomem *);
+struct clk *s10_register_gate(const struct stratix10_gate_clock *,
+			      void __iomem *);
 #endif	/* __STRATIX10_CLK_H */
-- 
cgit v1.2.3-59-g8ed1b


From 57795654fb553a78f07a9f92d87fb2582379cd93 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Thu, 16 Jan 2020 14:50:49 +0800
Subject: clk: imx: pll14xx: Add new frequency entries for pll1443x table

Add new frequency entries to pll1443x table to meet different
display settings requirement.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-pll14xx.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 5b0519a81a7a..37e311e1d058 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -55,8 +55,10 @@ static const struct imx_pll14xx_rate_table imx_pll1416x_tbl[] = {
 };
 
 static const struct imx_pll14xx_rate_table imx_pll1443x_tbl[] = {
+	PLL_1443X_RATE(1039500000U, 173, 2, 1, 16384),
 	PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
 	PLL_1443X_RATE(594000000U, 198, 2, 2, 0),
+	PLL_1443X_RATE(519750000U, 173, 2, 2, 16384),
 	PLL_1443X_RATE(393216000U, 262, 2, 3, 9437),
 	PLL_1443X_RATE(361267200U, 361, 3, 3, 17511),
 };
-- 
cgit v1.2.3-59-g8ed1b


From 73c7ddd8ee15dc5e06ffb2e22bde89c3deff3c45 Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Wed, 22 Jan 2020 11:04:50 +0100
Subject: clk: meson: gxbb: add the gxl internal dac gate

Add the ACODEC clock gate to the gxl clk controller driver

Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/gxbb.c | 3 +++
 drivers/clk/meson/gxbb.h | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 1f9c056e684c..47916c4f1700 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -2613,6 +2613,7 @@ static MESON_GATE(gxbb_assist_misc, HHI_GCLK_MPEG0, 23);
 static MESON_GATE(gxbb_emmc_a, HHI_GCLK_MPEG0, 24);
 static MESON_GATE(gxbb_emmc_b, HHI_GCLK_MPEG0, 25);
 static MESON_GATE(gxbb_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(gxl_acodec, HHI_GCLK_MPEG0, 28);
 static MESON_GATE(gxbb_spi, HHI_GCLK_MPEG0, 30);
 
 static MESON_GATE(gxbb_i2s_spdif, HHI_GCLK_MPEG1, 2);
@@ -3100,6 +3101,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
 		[CLKID_HDMI_SEL]	    = &gxbb_hdmi_sel.hw,
 		[CLKID_HDMI_DIV]	    = &gxbb_hdmi_div.hw,
 		[CLKID_HDMI]		    = &gxbb_hdmi.hw,
+		[CLKID_ACODEC]		    = &gxl_acodec.hw,
 		[NR_CLKS]		    = NULL,
 	},
 	.num = NR_CLKS,
@@ -3491,6 +3493,7 @@ static struct clk_regmap *const gxl_clk_regmaps[] = {
 	&gxl_hdmi_pll_od,
 	&gxl_hdmi_pll_od2,
 	&gxl_hdmi_pll_dco,
+	&gxl_acodec,
 };
 
 static const struct meson_eeclkc_data gxbb_clkc_data = {
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index b53584fe66cf..1ee8cb7e2f5a 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -188,7 +188,7 @@
 #define CLKID_HDMI_SEL		  203
 #define CLKID_HDMI_DIV		  204
 
-#define NR_CLKS			  206
+#define NR_CLKS			  207
 
 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/gxbb-clkc.h>
-- 
cgit v1.2.3-59-g8ed1b


From 83b89a75de9bf71203fddca00dc1cd8c9f5e6fd2 Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Wed, 22 Jan 2020 11:04:51 +0100
Subject: clk: meson: gxbb: set audio output clock hierarchy

The aiu devices peripheral clocks needs the aiu and aiu_glue clocks to
operate. Reflect this hierarchy in the gxbb clock tree.

Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/gxbb.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 47916c4f1700..5fd6a574f8c3 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -2619,14 +2619,6 @@ static MESON_GATE(gxbb_spi, HHI_GCLK_MPEG0, 30);
 static MESON_GATE(gxbb_i2s_spdif, HHI_GCLK_MPEG1, 2);
 static MESON_GATE(gxbb_eth, HHI_GCLK_MPEG1, 3);
 static MESON_GATE(gxbb_demux, HHI_GCLK_MPEG1, 4);
-static MESON_GATE(gxbb_aiu_glue, HHI_GCLK_MPEG1, 6);
-static MESON_GATE(gxbb_iec958, HHI_GCLK_MPEG1, 7);
-static MESON_GATE(gxbb_i2s_out, HHI_GCLK_MPEG1, 8);
-static MESON_GATE(gxbb_amclk, HHI_GCLK_MPEG1, 9);
-static MESON_GATE(gxbb_aififo2, HHI_GCLK_MPEG1, 10);
-static MESON_GATE(gxbb_mixer, HHI_GCLK_MPEG1, 11);
-static MESON_GATE(gxbb_mixer_iface, HHI_GCLK_MPEG1, 12);
-static MESON_GATE(gxbb_adc, HHI_GCLK_MPEG1, 13);
 static MESON_GATE(gxbb_blkmv, HHI_GCLK_MPEG1, 14);
 static MESON_GATE(gxbb_aiu, HHI_GCLK_MPEG1, 15);
 static MESON_GATE(gxbb_uart1, HHI_GCLK_MPEG1, 16);
@@ -2681,6 +2673,16 @@ static MESON_GATE(gxbb_ao_ahb_bus, HHI_GCLK_AO, 2);
 static MESON_GATE(gxbb_ao_iface, HHI_GCLK_AO, 3);
 static MESON_GATE(gxbb_ao_i2c, HHI_GCLK_AO, 4);
 
+/* AIU gates */
+static MESON_PCLK(gxbb_aiu_glue, HHI_GCLK_MPEG1, 6, &gxbb_aiu.hw);
+static MESON_PCLK(gxbb_iec958, HHI_GCLK_MPEG1, 7, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_i2s_out, HHI_GCLK_MPEG1, 8, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_amclk, HHI_GCLK_MPEG1, 9, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_aififo2, HHI_GCLK_MPEG1, 10, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_mixer, HHI_GCLK_MPEG1, 11, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_mixer_iface, HHI_GCLK_MPEG1, 12, &gxbb_aiu_glue.hw);
+static MESON_PCLK(gxbb_adc, HHI_GCLK_MPEG1, 13, &gxbb_aiu_glue.hw);
+
 /* Array of all clocks provided by this provider */
 
 static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
-- 
cgit v1.2.3-59-g8ed1b


From 14875e57d8ea9659916cfff524f6a268e882baf7 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Sun, 19 Jan 2020 10:12:46 +0000
Subject: clk: imx: imx8mp: add ocotp root clk

Add ocotp root clk, then when using nvmem to read fuse, clk
could be managed.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mp.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index f6c120cca0d4..ee83aa2162d9 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -671,6 +671,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_I2C2_ROOT] = imx_clk_hw_gate4("i2c2_root_clk", "i2c2", ccm_base + 0x4180, 0);
 	hws[IMX8MP_CLK_I2C3_ROOT] = imx_clk_hw_gate4("i2c3_root_clk", "i2c3", ccm_base + 0x4190, 0);
 	hws[IMX8MP_CLK_I2C4_ROOT] = imx_clk_hw_gate4("i2c4_root_clk", "i2c4", ccm_base + 0x41a0, 0);
+	hws[IMX8MP_CLK_OCOTP_ROOT] = imx_clk_hw_gate4("ocotp_root_clk", "ipg_root", ccm_base + 0x4220, 0);
 	hws[IMX8MP_CLK_PCIE_ROOT] = imx_clk_hw_gate4("pcie_root_clk", "pcie_aux", ccm_base + 0x4250, 0);
 	hws[IMX8MP_CLK_PWM1_ROOT] = imx_clk_hw_gate4("pwm1_root_clk", "pwm1", ccm_base + 0x4280, 0);
 	hws[IMX8MP_CLK_PWM2_ROOT] = imx_clk_hw_gate4("pwm2_root_clk", "pwm2", ccm_base + 0x4290, 0);
-- 
cgit v1.2.3-59-g8ed1b


From 62668b68dc8e7d4c23cdec60f31d9c8dc1384409 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Tue, 28 Jan 2020 05:28:36 +0000
Subject: clk: imx: composite-8m: add imx8m_clk_hw_composite_core

There are several clock slices, current composite code
only support bus/ip clock slices, it could not support core
slice.

So introduce a new API imx8m_clk_hw_composite_core to support
core slice. To core slice, post divider with 3 bits width and
no pre divider. Other fields are same as bus/ip slices.

Add a flag IMX_COMPOSITE_CORE for the usecase.

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-composite-8m.c | 18 ++++++++++++++----
 drivers/clk/imx/clk.h              | 13 +++++++++++--
 2 files changed, 25 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
index 20f7c91c03d2..4869c16376bf 100644
--- a/drivers/clk/imx/clk-composite-8m.c
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -15,6 +15,7 @@
 #define PCG_PREDIV_MAX		8
 
 #define PCG_DIV_SHIFT		0
+#define PCG_CORE_DIV_WIDTH	3
 #define PCG_DIV_WIDTH		6
 #define PCG_DIV_MAX		64
 
@@ -126,6 +127,7 @@ static const struct clk_ops imx8m_clk_composite_divider_ops = {
 struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 					const char * const *parent_names,
 					int num_parents, void __iomem *reg,
+					u32 composite_flags,
 					unsigned long flags)
 {
 	struct clk_hw *hw = ERR_PTR(-ENOMEM), *mux_hw;
@@ -133,6 +135,7 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 	struct clk_divider *div = NULL;
 	struct clk_gate *gate = NULL;
 	struct clk_mux *mux = NULL;
+	const struct clk_ops *divider_ops;
 
 	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
 	if (!mux)
@@ -150,8 +153,16 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 
 	div_hw = &div->hw;
 	div->reg = reg;
-	div->shift = PCG_PREDIV_SHIFT;
-	div->width = PCG_PREDIV_WIDTH;
+	if (composite_flags & IMX_COMPOSITE_CORE) {
+		div->shift = PCG_DIV_SHIFT;
+		div->width = PCG_CORE_DIV_WIDTH;
+		divider_ops = &clk_divider_ops;
+	} else {
+		div->shift = PCG_PREDIV_SHIFT;
+		div->width = PCG_PREDIV_WIDTH;
+		divider_ops = &imx8m_clk_composite_divider_ops;
+	}
+
 	div->lock = &imx_ccm_lock;
 	div->flags = CLK_DIVIDER_ROUND_CLOSEST;
 
@@ -166,8 +177,7 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 
 	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
 			mux_hw, &clk_mux_ops, div_hw,
-			&imx8m_clk_composite_divider_ops,
-			gate_hw, &clk_gate_ops, flags);
+			divider_ops, gate_hw, &clk_gate_ops, flags);
 	if (IS_ERR(hw))
 		goto fail;
 
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index b05213b91dcf..f074dd8ec42e 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -477,20 +477,29 @@ struct clk_hw *imx_clk_hw_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
 
+#define IMX_COMPOSITE_CORE	BIT(0)
+
 struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 					    const char * const *parent_names,
 					    int num_parents,
 					    void __iomem *reg,
+					    u32 composite_flags,
 					    unsigned long flags);
 
+#define imx8m_clk_hw_composite_core(name, parent_names, reg)	\
+	imx8m_clk_hw_composite_flags(name, parent_names, \
+			ARRAY_SIZE(parent_names), reg, \
+			IMX_COMPOSITE_CORE, \
+			CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE)
+
 #define imx8m_clk_composite_flags(name, parent_names, num_parents, reg, \
 				  flags) \
 	to_clk(imx8m_clk_hw_composite_flags(name, parent_names, \
-				num_parents, reg, flags))
+				num_parents, reg, 0, flags))
 
 #define __imx8m_clk_hw_composite(name, parent_names, reg, flags) \
 	imx8m_clk_hw_composite_flags(name, parent_names, \
-		ARRAY_SIZE(parent_names), reg, \
+		ARRAY_SIZE(parent_names), reg, 0, \
 		flags | CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE)
 
 #define __imx8m_clk_composite(name, parent_names, reg, flags) \
-- 
cgit v1.2.3-59-g8ed1b


From 7a8d3b90bdfe44d2e90523444ff82f0060d9560e Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Tue, 28 Jan 2020 05:28:41 +0000
Subject: clk: imx: imx8mq: use imx8m_clk_hw_composite_core

Use imx8m_clk_hw_composite_core to simplify code.

Add new definitions, and X_SRC/CG/DIV will be alias to the new
definitions for backwards compatibility

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mq.c             | 34 ++++++++++++++++++--------------
 include/dt-bindings/clock/imx8mq-clock.h |  7 ++++++-
 2 files changed, 25 insertions(+), 16 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 4c0edca1a6d0..ac9452cd9a82 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -403,22 +403,26 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 
 	/* CORE */
 	hws[IMX8MQ_CLK_A53_SRC] = imx_clk_hw_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mq_a53_sels, ARRAY_SIZE(imx8mq_a53_sels));
-	hws[IMX8MQ_CLK_M4_SRC] = imx_clk_hw_mux2("arm_m4_src", base + 0x8080, 24, 3, imx8mq_arm_m4_sels, ARRAY_SIZE(imx8mq_arm_m4_sels));
-	hws[IMX8MQ_CLK_VPU_SRC] = imx_clk_hw_mux2("vpu_src", base + 0x8100, 24, 3, imx8mq_vpu_sels, ARRAY_SIZE(imx8mq_vpu_sels));
-	hws[IMX8MQ_CLK_GPU_CORE_SRC] = imx_clk_hw_mux2("gpu_core_src", base + 0x8180, 24, 3,  imx8mq_gpu_core_sels, ARRAY_SIZE(imx8mq_gpu_core_sels));
-	hws[IMX8MQ_CLK_GPU_SHADER_SRC] = imx_clk_hw_mux2("gpu_shader_src", base + 0x8200, 24, 3, imx8mq_gpu_shader_sels,  ARRAY_SIZE(imx8mq_gpu_shader_sels));
-
 	hws[IMX8MQ_CLK_A53_CG] = imx_clk_hw_gate3_flags("arm_a53_cg", "arm_a53_src", base + 0x8000, 28, CLK_IS_CRITICAL);
-	hws[IMX8MQ_CLK_M4_CG] = imx_clk_hw_gate3("arm_m4_cg", "arm_m4_src", base + 0x8080, 28);
-	hws[IMX8MQ_CLK_VPU_CG] = imx_clk_hw_gate3("vpu_cg", "vpu_src", base + 0x8100, 28);
-	hws[IMX8MQ_CLK_GPU_CORE_CG] = imx_clk_hw_gate3("gpu_core_cg", "gpu_core_src", base + 0x8180, 28);
-	hws[IMX8MQ_CLK_GPU_SHADER_CG] = imx_clk_hw_gate3("gpu_shader_cg", "gpu_shader_src", base + 0x8200, 28);
-
 	hws[IMX8MQ_CLK_A53_DIV] = imx_clk_hw_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3);
-	hws[IMX8MQ_CLK_M4_DIV] = imx_clk_hw_divider2("arm_m4_div", "arm_m4_cg", base + 0x8080, 0, 3);
-	hws[IMX8MQ_CLK_VPU_DIV] = imx_clk_hw_divider2("vpu_div", "vpu_cg", base + 0x8100, 0, 3);
-	hws[IMX8MQ_CLK_GPU_CORE_DIV] = imx_clk_hw_divider2("gpu_core_div", "gpu_core_cg", base + 0x8180, 0, 3);
-	hws[IMX8MQ_CLK_GPU_SHADER_DIV] = imx_clk_hw_divider2("gpu_shader_div", "gpu_shader_cg", base + 0x8200, 0, 3);
+
+	hws[IMX8MQ_CLK_M4_CORE] = imx8m_clk_hw_composite_core("arm_m4_core", imx8mq_arm_m4_sels, base + 0x8080);
+	hws[IMX8MQ_CLK_VPU_CORE] = imx8m_clk_hw_composite_core("vpu_core", imx8mq_vpu_sels, base + 0x8100);
+	hws[IMX8MQ_CLK_GPU_CORE] = imx8m_clk_hw_composite_core("gpu_core", imx8mq_gpu_core_sels, base + 0x8180);
+	hws[IMX8MQ_CLK_GPU_SHADER] = imx8m_clk_hw_composite("gpu_shader", imx8mq_gpu_shader_sels, base + 0x8200);
+	/* For backwards compatibility */
+	hws[IMX8MQ_CLK_M4_SRC] = hws[IMX8MQ_CLK_M4_CORE];
+	hws[IMX8MQ_CLK_M4_CG] = hws[IMX8MQ_CLK_M4_CORE];
+	hws[IMX8MQ_CLK_M4_DIV] = hws[IMX8MQ_CLK_M4_CORE];
+	hws[IMX8MQ_CLK_VPU_SRC] = hws[IMX8MQ_CLK_VPU_CORE];
+	hws[IMX8MQ_CLK_VPU_CG] = hws[IMX8MQ_CLK_VPU_CORE];
+	hws[IMX8MQ_CLK_VPU_DIV] = hws[IMX8MQ_CLK_VPU_CORE];
+	hws[IMX8MQ_CLK_GPU_CORE_SRC] = hws[IMX8MQ_CLK_GPU_CORE];
+	hws[IMX8MQ_CLK_GPU_CORE_CG] = hws[IMX8MQ_CLK_GPU_CORE];
+	hws[IMX8MQ_CLK_GPU_CORE_DIV] = hws[IMX8MQ_CLK_GPU_CORE];
+	hws[IMX8MQ_CLK_GPU_SHADER_SRC] = hws[IMX8MQ_CLK_GPU_SHADER];
+	hws[IMX8MQ_CLK_GPU_SHADER_CG] = hws[IMX8MQ_CLK_GPU_SHADER];
+	hws[IMX8MQ_CLK_GPU_SHADER_DIV] = hws[IMX8MQ_CLK_GPU_SHADER];
 
 	/* BUS */
 	hws[IMX8MQ_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mq_main_axi_sels, base + 0x8800);
@@ -567,7 +571,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_CLK_WDOG2_ROOT] = imx_clk_hw_gate4("wdog2_root_clk", "wdog", base + 0x4540, 0);
 	hws[IMX8MQ_CLK_WDOG3_ROOT] = imx_clk_hw_gate4("wdog3_root_clk", "wdog", base + 0x4550, 0);
 	hws[IMX8MQ_CLK_VPU_G1_ROOT] = imx_clk_hw_gate2_flags("vpu_g1_root_clk", "vpu_g1", base + 0x4560, 0, CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
-	hws[IMX8MQ_CLK_GPU_ROOT] = imx_clk_hw_gate4("gpu_root_clk", "gpu_core_div", base + 0x4570, 0);
+	hws[IMX8MQ_CLK_GPU_ROOT] = imx_clk_hw_gate4("gpu_root_clk", "gpu_core", base + 0x4570, 0);
 	hws[IMX8MQ_CLK_VPU_G2_ROOT] = imx_clk_hw_gate2_flags("vpu_g2_root_clk", "vpu_g2", base + 0x45a0, 0, CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
 	hws[IMX8MQ_CLK_DISP_ROOT] = imx_clk_hw_gate2_shared2("disp_root_clk", "disp_dc8000", base + 0x45d0, 0, &share_count_dcss);
 	hws[IMX8MQ_CLK_DISP_AXI_ROOT]  = imx_clk_hw_gate2_shared2("disp_axi_root_clk", "disp_axi", base + 0x45d0, 0, &share_count_dcss);
diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h
index 3bab9b21c8d7..2b88723310bd 100644
--- a/include/dt-bindings/clock/imx8mq-clock.h
+++ b/include/dt-bindings/clock/imx8mq-clock.h
@@ -424,6 +424,11 @@
 #define IMX8MQ_SYS2_PLL_500M_CG			283
 #define IMX8MQ_SYS2_PLL_1000M_CG		284
 
-#define IMX8MQ_CLK_END				285
+#define IMX8MQ_CLK_GPU_CORE			285
+#define IMX8MQ_CLK_GPU_SHADER			286
+#define IMX8MQ_CLK_M4_CORE			287
+#define IMX8MQ_CLK_VPU_CORE			288
+
+#define IMX8MQ_CLK_END				289
 
 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */
-- 
cgit v1.2.3-59-g8ed1b


From 811e4171d0f5ac6d1172333adf361c74ce2c8ec5 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Tue, 28 Jan 2020 05:28:46 +0000
Subject: clk: imx: imx8mm: use imx8m_clk_hw_composite_core

Use imx8m_clk_hw_composite_core to simplify code.

Add new definitions, and X_SRC/CG/DIV will be alias to the new
definitions for backwards compatibility

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c             | 35 +++++++++++++++++++-------------
 include/dt-bindings/clock/imx8mm-clock.h |  7 ++++++-
 2 files changed, 27 insertions(+), 15 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 2ed93fc25087..f79a5f5d9ed5 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -414,20 +414,27 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 
 	/* Core Slice */
 	hws[IMX8MM_CLK_A53_SRC] = imx_clk_hw_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mm_a53_sels, ARRAY_SIZE(imx8mm_a53_sels));
-	hws[IMX8MM_CLK_M4_SRC] = imx_clk_hw_mux2("arm_m4_src", base + 0x8080, 24, 3, imx8mm_m4_sels, ARRAY_SIZE(imx8mm_m4_sels));
-	hws[IMX8MM_CLK_VPU_SRC] = imx_clk_hw_mux2("vpu_src", base + 0x8100, 24, 3, imx8mm_vpu_sels, ARRAY_SIZE(imx8mm_vpu_sels));
-	hws[IMX8MM_CLK_GPU3D_SRC] = imx_clk_hw_mux2("gpu3d_src", base + 0x8180, 24, 3,  imx8mm_gpu3d_sels, ARRAY_SIZE(imx8mm_gpu3d_sels));
-	hws[IMX8MM_CLK_GPU2D_SRC] = imx_clk_hw_mux2("gpu2d_src", base + 0x8200, 24, 3, imx8mm_gpu2d_sels,  ARRAY_SIZE(imx8mm_gpu2d_sels));
 	hws[IMX8MM_CLK_A53_CG] = imx_clk_hw_gate3("arm_a53_cg", "arm_a53_src", base + 0x8000, 28);
-	hws[IMX8MM_CLK_M4_CG] = imx_clk_hw_gate3("arm_m4_cg", "arm_m4_src", base + 0x8080, 28);
-	hws[IMX8MM_CLK_VPU_CG] = imx_clk_hw_gate3("vpu_cg", "vpu_src", base + 0x8100, 28);
-	hws[IMX8MM_CLK_GPU3D_CG] = imx_clk_hw_gate3("gpu3d_cg", "gpu3d_src", base + 0x8180, 28);
-	hws[IMX8MM_CLK_GPU2D_CG] = imx_clk_hw_gate3("gpu2d_cg", "gpu2d_src", base + 0x8200, 28);
 	hws[IMX8MM_CLK_A53_DIV] = imx_clk_hw_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3);
-	hws[IMX8MM_CLK_M4_DIV] = imx_clk_hw_divider2("arm_m4_div", "arm_m4_cg", base + 0x8080, 0, 3);
-	hws[IMX8MM_CLK_VPU_DIV] = imx_clk_hw_divider2("vpu_div", "vpu_cg", base + 0x8100, 0, 3);
-	hws[IMX8MM_CLK_GPU3D_DIV] = imx_clk_hw_divider2("gpu3d_div", "gpu3d_cg", base + 0x8180, 0, 3);
-	hws[IMX8MM_CLK_GPU2D_DIV] = imx_clk_hw_divider2("gpu2d_div", "gpu2d_cg", base + 0x8200, 0, 3);
+
+	hws[IMX8MM_CLK_M4_CORE] = imx8m_clk_hw_composite_core("arm_m4_core", imx8mm_m4_sels, base + 0x8080);
+	hws[IMX8MM_CLK_VPU_CORE] = imx8m_clk_hw_composite_core("vpu_core", imx8mm_vpu_sels, base + 0x8100);
+	hws[IMX8MM_CLK_GPU3D_CORE] = imx8m_clk_hw_composite_core("gpu3d_core", imx8mm_gpu3d_sels, base + 0x8180);
+	hws[IMX8MM_CLK_GPU2D_CORE] = imx8m_clk_hw_composite_core("gpu2d_core", imx8mm_gpu2d_sels, base + 0x8200);
+
+	/* For backwards compatibility */
+	hws[IMX8MM_CLK_M4_SRC] = hws[IMX8MM_CLK_M4_CORE];
+	hws[IMX8MM_CLK_M4_CG] = hws[IMX8MM_CLK_M4_CORE];
+	hws[IMX8MM_CLK_M4_DIV] = hws[IMX8MM_CLK_M4_CORE];
+	hws[IMX8MM_CLK_VPU_SRC] = hws[IMX8MM_CLK_VPU_CORE];
+	hws[IMX8MM_CLK_VPU_CG] = hws[IMX8MM_CLK_VPU_CORE];
+	hws[IMX8MM_CLK_VPU_DIV] = hws[IMX8MM_CLK_VPU_CORE];
+	hws[IMX8MM_CLK_GPU3D_SRC] = hws[IMX8MM_CLK_GPU3D_CORE];
+	hws[IMX8MM_CLK_GPU3D_CG] = hws[IMX8MM_CLK_GPU3D_CORE];
+	hws[IMX8MM_CLK_GPU3D_DIV] = hws[IMX8MM_CLK_GPU3D_CORE];
+	hws[IMX8MM_CLK_GPU2D_SRC] = hws[IMX8MM_CLK_GPU2D_CORE];
+	hws[IMX8MM_CLK_GPU2D_CG] = hws[IMX8MM_CLK_GPU2D_CORE];
+	hws[IMX8MM_CLK_GPU2D_DIV] = hws[IMX8MM_CLK_GPU2D_CORE];
 
 	/* BUS */
 	hws[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi",  imx8mm_main_axi_sels, base + 0x8800);
@@ -564,7 +571,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
 	hws[IMX8MM_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0);
 	hws[IMX8MM_CLK_USB1_CTRL_ROOT] = imx_clk_hw_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0);
-	hws[IMX8MM_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_div", base + 0x44f0, 0);
+	hws[IMX8MM_CLK_GPU3D_ROOT] = imx_clk_hw_gate4("gpu3d_root_clk", "gpu3d_core", base + 0x44f0, 0);
 	hws[IMX8MM_CLK_USDHC1_ROOT] = imx_clk_hw_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0);
 	hws[IMX8MM_CLK_USDHC2_ROOT] = imx_clk_hw_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0);
 	hws[IMX8MM_CLK_WDOG1_ROOT] = imx_clk_hw_gate4("wdog1_root_clk", "wdog", base + 0x4530, 0);
@@ -586,7 +593,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_SDMA1_ROOT] = imx_clk_hw_gate4("sdma1_clk", "ipg_root", base + 0x43a0, 0);
 	hws[IMX8MM_CLK_SDMA2_ROOT] = imx_clk_hw_gate4("sdma2_clk", "ipg_audio_root", base + 0x43b0, 0);
 	hws[IMX8MM_CLK_SDMA3_ROOT] = imx_clk_hw_gate4("sdma3_clk", "ipg_audio_root", base + 0x45f0, 0);
-	hws[IMX8MM_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_div", base + 0x4660, 0);
+	hws[IMX8MM_CLK_GPU2D_ROOT] = imx_clk_hw_gate4("gpu2d_root_clk", "gpu2d_core", base + 0x4660, 0);
 	hws[IMX8MM_CLK_CSI1_ROOT] = imx_clk_hw_gate4("csi1_root_clk", "csi1_core", base + 0x4650, 0);
 
 	hws[IMX8MM_CLK_GPT_3M] = imx_clk_hw_fixed_factor("gpt_3m", "osc_24m", 1, 8);
diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h
index edeece2289f0..038c28d349e8 100644
--- a/include/dt-bindings/clock/imx8mm-clock.h
+++ b/include/dt-bindings/clock/imx8mm-clock.h
@@ -265,6 +265,11 @@
 #define IMX8MM_SYS_PLL2_333M_CG			244
 #define IMX8MM_SYS_PLL2_500M_CG			245
 
-#define IMX8MM_CLK_END				246
+#define IMX8MM_CLK_M4_CORE			246
+#define IMX8MM_CLK_VPU_CORE			247
+#define IMX8MM_CLK_GPU3D_CORE			248
+#define IMX8MM_CLK_GPU2D_CORE			249
+
+#define IMX8MM_CLK_END				250
 
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From 33db2ce73e9affe9a25130b166048f5a209d4dc1 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Tue, 28 Jan 2020 05:28:50 +0000
Subject: clk: imx: imx8mn: use imx8m_clk_hw_composite_core

Use imx8m_clk_hw_composite_core to simplify code.

Add new definitions, and X_SRC/CG/DIV will be alias to the new
definitions for backwards compatibility

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mn.c             | 19 +++++++++++--------
 include/dt-bindings/clock/imx8mn-clock.h |  4 +++-
 2 files changed, 14 insertions(+), 9 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index a181eb2df876..7eea15a81838 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -413,15 +413,18 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	/* CORE */
 	hws[IMX8MN_CLK_A53_SRC] = imx_clk_hw_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mn_a53_sels, ARRAY_SIZE(imx8mn_a53_sels));
-	hws[IMX8MN_CLK_GPU_CORE_SRC] = imx_clk_hw_mux2("gpu_core_src", base + 0x8180, 24, 3,  imx8mn_gpu_core_sels, ARRAY_SIZE(imx8mn_gpu_core_sels));
-	hws[IMX8MN_CLK_GPU_SHADER_SRC] = imx_clk_hw_mux2("gpu_shader_src", base + 0x8200, 24, 3, imx8mn_gpu_shader_sels,  ARRAY_SIZE(imx8mn_gpu_shader_sels));
 	hws[IMX8MN_CLK_A53_CG] = imx_clk_hw_gate3("arm_a53_cg", "arm_a53_src", base + 0x8000, 28);
-	hws[IMX8MN_CLK_GPU_CORE_CG] = imx_clk_hw_gate3("gpu_core_cg", "gpu_core_src", base + 0x8180, 28);
-	hws[IMX8MN_CLK_GPU_SHADER_CG] = imx_clk_hw_gate3("gpu_shader_cg", "gpu_shader_src", base + 0x8200, 28);
-
 	hws[IMX8MN_CLK_A53_DIV] = imx_clk_hw_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3);
-	hws[IMX8MN_CLK_GPU_CORE_DIV] = imx_clk_hw_divider2("gpu_core_div", "gpu_core_cg", base + 0x8180, 0, 3);
-	hws[IMX8MN_CLK_GPU_SHADER_DIV] = imx_clk_hw_divider2("gpu_shader_div", "gpu_shader_cg", base + 0x8200, 0, 3);
+
+	hws[IMX8MN_CLK_GPU_CORE] = imx8m_clk_hw_composite_core("gpu_core", imx8mn_gpu_core_sels, base + 0x8180);
+	hws[IMX8MN_CLK_GPU_SHADER] = imx8m_clk_hw_composite_core("gpu_shader", imx8mn_gpu_shader_sels, base + 0x8200);
+
+	hws[IMX8MN_CLK_GPU_CORE_SRC] = hws[IMX8MN_CLK_GPU_CORE];
+	hws[IMX8MN_CLK_GPU_CORE_CG] = hws[IMX8MN_CLK_GPU_CORE];
+	hws[IMX8MN_CLK_GPU_CORE_DIV] = hws[IMX8MN_CLK_GPU_CORE];
+	hws[IMX8MN_CLK_GPU_SHADER_SRC] = hws[IMX8MN_CLK_GPU_SHADER];
+	hws[IMX8MN_CLK_GPU_SHADER_CG] = hws[IMX8MN_CLK_GPU_SHADER];
+	hws[IMX8MN_CLK_GPU_SHADER_DIV] = hws[IMX8MN_CLK_GPU_SHADER];
 
 	/* BUS */
 	hws[IMX8MN_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mn_main_axi_sels, base + 0x8800);
@@ -529,7 +532,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MN_CLK_UART3_ROOT] = imx_clk_hw_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
 	hws[IMX8MN_CLK_UART4_ROOT] = imx_clk_hw_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0);
 	hws[IMX8MN_CLK_USB1_CTRL_ROOT] = imx_clk_hw_gate4("usb1_ctrl_root_clk", "usb_bus", base + 0x44d0, 0);
-	hws[IMX8MN_CLK_GPU_CORE_ROOT] = imx_clk_hw_gate4("gpu_core_root_clk", "gpu_core_div", base + 0x44f0, 0);
+	hws[IMX8MN_CLK_GPU_CORE_ROOT] = imx_clk_hw_gate4("gpu_core_root_clk", "gpu_core", base + 0x44f0, 0);
 	hws[IMX8MN_CLK_USDHC1_ROOT] = imx_clk_hw_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0);
 	hws[IMX8MN_CLK_USDHC2_ROOT] = imx_clk_hw_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0);
 	hws[IMX8MN_CLK_WDOG1_ROOT] = imx_clk_hw_gate4("wdog1_root_clk", "wdog", base + 0x4530, 0);
diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h
index 43883fe65db5..c42a22d3cf7c 100644
--- a/include/dt-bindings/clock/imx8mn-clock.h
+++ b/include/dt-bindings/clock/imx8mn-clock.h
@@ -229,7 +229,9 @@
 #define IMX8MN_SYS_PLL2_500M_CG			210
 
 #define IMX8MN_CLK_SNVS_ROOT			211
+#define IMX8MN_CLK_GPU_CORE			212
+#define IMX8MN_CLK_GPU_SHADER			213
 
-#define IMX8MN_CLK_END				212
+#define IMX8MN_CLK_END				214
 
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From bcacd6f7c94abb99300e365a6aef93212fc24f15 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Tue, 11 Feb 2020 00:08:12 -0300
Subject: clk: imx8mm: Fix the CLKO1 source select list

The CLKO1 clock source select list is the following as per the i.MX8MM
Reference Manual (put in increasing order):

000 - 24M_REF_CLK
001 - SYSTEM_PLL1_CLK
010 - None
011 - SYSTEM_PLL1_DIV4
100 - AUDIO_PLL2_CLK
101 - SYSTEM_PLL2_DIV2
110 - VPU_PLL_CLK
111 - SYSTEM_PLL1_DIV10

Fix it accordingly.

Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index f79a5f5d9ed5..523a5b15ae7d 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -283,8 +283,8 @@ static const char *imx8mm_vpu_h1_sels[] = {"osc_24m", "vpu_pll_out", "sys_pll1_8
 
 static const char *imx8mm_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", };
 
-static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "osc_27m", "sys_pll1_200m", "audio_pll2_out",
-					 "vpu_pll", "sys_pll1_80m", };
+static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "dummy", "sys_pll1_200m",
+					  "audio_pll2_out", "sys_pll2_500m", "vpu_pll", "sys_pll1_80m", };
 
 static struct clk_hw_onecell_data *clk_hw_data;
 static struct clk_hw **hws;
-- 
cgit v1.2.3-59-g8ed1b


From 9c07ae6983d434841bb19bea0a75bd0fd925a75c Mon Sep 17 00:00:00 2001
From: Fabio Estevam <festevam@gmail.com>
Date: Mon, 17 Feb 2020 13:49:38 +0800
Subject: clk: imx8mm: Add CLKO2 support

Add CLKO2 support, which is useful for debugging purposes.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c             | 3 +++
 include/dt-bindings/clock/imx8mm-clock.h | 4 +++-
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 523a5b15ae7d..6dbdc1a1b5eb 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -285,6 +285,8 @@ static const char *imx8mm_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", }
 
 static const char *imx8mm_clko1_sels[] = {"osc_24m", "sys_pll1_800m", "dummy", "sys_pll1_200m",
 					  "audio_pll2_out", "sys_pll2_500m", "vpu_pll", "sys_pll1_80m", };
+static const char *imx8mm_clko2_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_400m", "sys_pll2_166m",
+					  "sys_pll3_out", "audio_pll1_out", "video_pll1_out", "osc_32k", };
 
 static struct clk_hw_onecell_data *clk_hw_data;
 static struct clk_hw **hws;
@@ -511,6 +513,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_WDOG] = imx8m_clk_hw_composite("wdog", imx8mm_wdog_sels, base + 0xb900);
 	hws[IMX8MM_CLK_WRCLK] = imx8m_clk_hw_composite("wrclk", imx8mm_wrclk_sels, base + 0xb980);
 	hws[IMX8MM_CLK_CLKO1] = imx8m_clk_hw_composite("clko1", imx8mm_clko1_sels, base + 0xba00);
+	hws[IMX8MM_CLK_CLKO2] = imx8m_clk_hw_composite("clko2", imx8mm_clko2_sels, base + 0xba80);
 	hws[IMX8MM_CLK_DSI_CORE] = imx8m_clk_hw_composite("dsi_core", imx8mm_dsi_core_sels, base + 0xbb00);
 	hws[IMX8MM_CLK_DSI_PHY_REF] = imx8m_clk_hw_composite("dsi_phy_ref", imx8mm_dsi_phy_sels, base + 0xbb80);
 	hws[IMX8MM_CLK_DSI_DBI] = imx8m_clk_hw_composite("dsi_dbi", imx8mm_dsi_dbi_sels, base + 0xbc00);
diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h
index 038c28d349e8..dbfee6579d6c 100644
--- a/include/dt-bindings/clock/imx8mm-clock.h
+++ b/include/dt-bindings/clock/imx8mm-clock.h
@@ -270,6 +270,8 @@
 #define IMX8MM_CLK_GPU3D_CORE			248
 #define IMX8MM_CLK_GPU2D_CORE			249
 
-#define IMX8MM_CLK_END				250
+#define IMX8MM_CLK_CLKO2			250
+
+#define IMX8MM_CLK_END				251
 
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From f95d58981f40b546429e1b06e441c70bcc52786e Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 15:02:23 +0800
Subject: clk: imx: Include clk-provider.h instead of clk.h for i.MX8M SoCs
 clock driver

The i.MX8M SoCs clock driver are provider, NOT consumer, so clk-provider.h
should be used instead of clk.h.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c | 2 +-
 drivers/clk/imx/clk-imx8mn.c | 2 +-
 drivers/clk/imx/clk-imx8mq.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 6dbdc1a1b5eb..0cba5d4bd51e 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -4,7 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8mm-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 7eea15a81838..6f4547fec368 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -4,7 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8mn-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index ac9452cd9a82..8b4b2fbe4a65 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -5,7 +5,7 @@
  */
 
 #include <dt-bindings/clock/imx8mq-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
-- 
cgit v1.2.3-59-g8ed1b


From 79ccef698ac811b3029fd01cbe2114fed3219c8a Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 17:03:00 +0800
Subject: clk: imx: drop redundant initialization

No need to initialize flags as 0, remove the initialization.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-composite-8m.c | 2 +-
 drivers/clk/imx/clk-fixup-div.c    | 2 +-
 drivers/clk/imx/clk-fixup-mux.c    | 2 +-
 drivers/clk/imx/clk-gate2.c        | 6 +++---
 4 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
index 4869c16376bf..99773519b5a5 100644
--- a/drivers/clk/imx/clk-composite-8m.c
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -92,7 +92,7 @@ static int imx8m_clk_composite_divider_set_rate(struct clk_hw *hw,
 					unsigned long parent_rate)
 {
 	struct clk_divider *divider = to_clk_divider(hw);
-	unsigned long flags = 0;
+	unsigned long flags;
 	int prediv_value;
 	int div_value;
 	int ret;
diff --git a/drivers/clk/imx/clk-fixup-div.c b/drivers/clk/imx/clk-fixup-div.c
index 4b17b91504ed..100ca828b052 100644
--- a/drivers/clk/imx/clk-fixup-div.c
+++ b/drivers/clk/imx/clk-fixup-div.c
@@ -55,7 +55,7 @@ static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
 	struct clk_divider *div = to_clk_divider(hw);
 	unsigned int divider, value;
-	unsigned long flags = 0;
+	unsigned long flags;
 	u32 val;
 
 	divider = parent_rate / rate;
diff --git a/drivers/clk/imx/clk-fixup-mux.c b/drivers/clk/imx/clk-fixup-mux.c
index b569d919c645..58a67630bb6a 100644
--- a/drivers/clk/imx/clk-fixup-mux.c
+++ b/drivers/clk/imx/clk-fixup-mux.c
@@ -42,7 +42,7 @@ static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
 {
 	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
 	struct clk_mux *mux = to_clk_mux(hw);
-	unsigned long flags = 0;
+	unsigned long flags;
 	u32 val;
 
 	spin_lock_irqsave(mux->lock, flags);
diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
index 7d44ce814806..72a7698be791 100644
--- a/drivers/clk/imx/clk-gate2.c
+++ b/drivers/clk/imx/clk-gate2.c
@@ -40,7 +40,7 @@ static int clk_gate2_enable(struct clk_hw *hw)
 {
 	struct clk_gate2 *gate = to_clk_gate2(hw);
 	u32 reg;
-	unsigned long flags = 0;
+	unsigned long flags;
 
 	spin_lock_irqsave(gate->lock, flags);
 
@@ -62,7 +62,7 @@ static void clk_gate2_disable(struct clk_hw *hw)
 {
 	struct clk_gate2 *gate = to_clk_gate2(hw);
 	u32 reg;
-	unsigned long flags = 0;
+	unsigned long flags;
 
 	spin_lock_irqsave(gate->lock, flags);
 
@@ -101,7 +101,7 @@ static int clk_gate2_is_enabled(struct clk_hw *hw)
 static void clk_gate2_disable_unused(struct clk_hw *hw)
 {
 	struct clk_gate2 *gate = to_clk_gate2(hw);
-	unsigned long flags = 0;
+	unsigned long flags;
 	u32 reg;
 
 	spin_lock_irqsave(gate->lock, flags);
-- 
cgit v1.2.3-59-g8ed1b


From 836b2513326ef047e67123ecea389e65addf6c18 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 17:09:43 +0800
Subject: clk: imx7ulp: Include clk-provider.h instead of clk.h

The i.MX7ULP clock driver is provider, NOT consumer, so clk-provider.h
should be used instead of clk.h.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx7ulp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
index 0620d6c8c072..3710aa0dee9b 100644
--- a/drivers/clk/imx/clk-imx7ulp.c
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -8,7 +8,7 @@
  */
 
 #include <dt-bindings/clock/imx7ulp-clock.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
-- 
cgit v1.2.3-59-g8ed1b


From 8b1a3c0ba9b1cec6dc91904604130a435d90c53c Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 19:57:33 +0800
Subject: clk: imx6sl: Add missing of_node_put()

After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx6sl.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 4bd44d89eaaa..0f647d148abf 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -208,6 +208,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	of_node_put(np);
 	anatop_base = base;
 
 	hws[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_hw_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-- 
cgit v1.2.3-59-g8ed1b


From cb5ae504f2014a66c131920b8eb0ca6b0e6851c6 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 19:57:34 +0800
Subject: clk: imx8mq: Add missing of_node_put()

After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mq.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 8b4b2fbe4a65..1f5ea1eaad65 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -305,6 +305,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!base))
 		return -ENOMEM;
 
-- 
cgit v1.2.3-59-g8ed1b


From 5062d46e2698e720f866c06563419bff09dcacb4 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 19:57:35 +0800
Subject: clk: imx8mm: Add missing of_node_put()

After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 0cba5d4bd51e..2f2c240a86e2 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -324,6 +324,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!base))
 		return -ENOMEM;
 
-- 
cgit v1.2.3-59-g8ed1b


From d93171b54cb44e65c1ec5462c17704b51b8afc27 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 19:57:36 +0800
Subject: clk: imx8mn: Add missing of_node_put()

After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mn.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 6f4547fec368..67b826d7184b 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -317,6 +317,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mn-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!base)) {
 		ret = -ENOMEM;
 		goto unregister_hws;
-- 
cgit v1.2.3-59-g8ed1b


From 680fbce528169eaadf621066a4925794e2addbd7 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 12 Feb 2020 19:57:37 +0800
Subject: clk: imx8mp: Add missing of_node_put()

After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mp.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index ee83aa2162d9..a16af4fce044 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -434,6 +434,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mp-anatop");
 	anatop_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (WARN_ON(!anatop_base))
 		return -ENOMEM;
 
-- 
cgit v1.2.3-59-g8ed1b


From 64bee9c6cd48179010149313f74f9557345fd0da Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 18 Feb 2020 19:03:24 +0800
Subject: clk: imx8mp: Include slab.h instead of clkdev.h

slab.h is necessary and included indirectly by clkdev.h,
actually, there is nothing in use from clkdev.h, so just
include slab.h instead of clkdev.h.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index a16af4fce044..3adc8aa46200 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -4,13 +4,13 @@
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
-#include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/types.h>
 
 #include "clk.h"
-- 
cgit v1.2.3-59-g8ed1b


From 2b507025e4b728bb1612855caa6a4abaf5fb0030 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 18 Feb 2020 19:03:25 +0800
Subject: clk: imx8mm: Remove unused includes

There is nothing in use from init.h/of.h, remove them.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 2f2c240a86e2..481d20ae4e0b 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -6,10 +6,8 @@
 #include <dt-bindings/clock/imx8mm-clock.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-- 
cgit v1.2.3-59-g8ed1b


From 6b2d0cffee52260bbf20414ce408af3f6f718d52 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 18 Feb 2020 19:03:26 +0800
Subject: clk: imx8mn: Remove unused includes

There is nothing in use from init.h/of.h, remove them.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mn.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 67b826d7184b..fb47f86e35e8 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -6,10 +6,8 @@
 #include <dt-bindings/clock/imx8mn-clock.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-- 
cgit v1.2.3-59-g8ed1b


From a18c8e0b76979881f3b31e96c398e62ab30a1662 Mon Sep 17 00:00:00 2001
From: Neil Armstrong <narmstrong@baylibre.com>
Date: Wed, 19 Feb 2020 09:49:28 +0100
Subject: clk: meson: g12a: add support for the SPICC SCLK Source clocks

This adds the clocks used for the Amlogic G12A and compatible SoCs SPICC
controller to provide a more complete range of frequencies instead of the
SPICC internal divider over Xtal.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/g12a.c | 129 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/g12a.h |   6 ++-
 2 files changed, 134 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index d2760a021301..fad616cac01e 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -3862,6 +3862,111 @@ static struct clk_regmap g12a_ts = {
 	},
 };
 
+/* SPICC SCLK source clock */
+
+static const struct clk_parent_data spicc_sclk_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &g12a_clk81.hw },
+	{ .hw = &g12a_fclk_div4.hw },
+	{ .hw = &g12a_fclk_div3.hw },
+	{ .hw = &g12a_fclk_div5.hw },
+	{ .hw = &g12a_fclk_div7.hw },
+};
+
+static struct clk_regmap g12a_spicc0_sclk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.mask = 7,
+		.shift = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_sclk_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+	},
+};
+
+static struct clk_regmap g12a_spicc0_sclk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.shift = 0,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc0_sclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc0_sclk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc0_sclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.mask = 7,
+		.shift = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_sclk_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.shift = 16,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc1_sclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.bit_idx = 22,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc1_sclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 #define MESON_GATE(_name, _reg, _bit) \
 	MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw)
 
@@ -4159,6 +4264,12 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
 		[CLKID_VDEC_HEVCF]		= &g12a_vdec_hevcf.hw,
 		[CLKID_TS_DIV]			= &g12a_ts_div.hw,
 		[CLKID_TS]			= &g12a_ts.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4408,6 +4519,12 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
 		[CLKID_CPUB_CLK_AXI]		= &g12b_cpub_clk_axi.hw,
 		[CLKID_CPUB_CLK_TRACE_SEL]	= &g12b_cpub_clk_trace_sel.hw,
 		[CLKID_CPUB_CLK_TRACE]		= &g12b_cpub_clk_trace.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4642,6 +4759,12 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
 		[CLKID_CPU1_CLK]		= &sm1_cpu1_clk.hw,
 		[CLKID_CPU2_CLK]		= &sm1_cpu2_clk.hw,
 		[CLKID_CPU3_CLK]		= &sm1_cpu3_clk.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4877,6 +5000,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
 	&sm1_cpu1_clk,
 	&sm1_cpu2_clk,
 	&sm1_cpu3_clk,
+	&g12a_spicc0_sclk_sel,
+	&g12a_spicc0_sclk_div,
+	&g12a_spicc0_sclk,
+	&g12a_spicc1_sclk_sel,
+	&g12a_spicc1_sclk_div,
+	&g12a_spicc1_sclk,
 };
 
 static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index 9df4068aced1..a8852556836e 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -255,8 +255,12 @@
 #define CLKID_DSU_CLK_DYN1			249
 #define CLKID_DSU_CLK_DYN			250
 #define CLKID_DSU_CLK_FINAL			251
+#define CLKID_SPICC0_SCLK_SEL			256
+#define CLKID_SPICC0_SCLK_DIV			257
+#define CLKID_SPICC1_SCLK_SEL			259
+#define CLKID_SPICC1_SCLK_DIV			260
 
-#define NR_CLKS					256
+#define NR_CLKS					262
 
 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/g12a-clkc.h>
-- 
cgit v1.2.3-59-g8ed1b


From 71202c412478d6553281726a6772d0d5510c42fb Mon Sep 17 00:00:00 2001
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Thu, 20 Feb 2020 21:44:33 +0100
Subject: clk: meson: meson8b: set audio output clock hierarchy

The aiu devices peripheral clocks needs the aiu and aiu_glue clocks to
operate. Reflect this hierarchy in the clock tree.

Fixes: e31a1900c1ff73 ("meson: clk: Add support for clock gates")
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 drivers/clk/meson/meson8b.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 9fd31f23b2a9..34a70c4b4899 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -2605,14 +2605,6 @@ static MESON_GATE(meson8b_spi, HHI_GCLK_MPEG0, 30);
 static MESON_GATE(meson8b_i2s_spdif, HHI_GCLK_MPEG1, 2);
 static MESON_GATE(meson8b_eth, HHI_GCLK_MPEG1, 3);
 static MESON_GATE(meson8b_demux, HHI_GCLK_MPEG1, 4);
-static MESON_GATE(meson8b_aiu_glue, HHI_GCLK_MPEG1, 6);
-static MESON_GATE(meson8b_iec958, HHI_GCLK_MPEG1, 7);
-static MESON_GATE(meson8b_i2s_out, HHI_GCLK_MPEG1, 8);
-static MESON_GATE(meson8b_amclk, HHI_GCLK_MPEG1, 9);
-static MESON_GATE(meson8b_aififo2, HHI_GCLK_MPEG1, 10);
-static MESON_GATE(meson8b_mixer, HHI_GCLK_MPEG1, 11);
-static MESON_GATE(meson8b_mixer_iface, HHI_GCLK_MPEG1, 12);
-static MESON_GATE(meson8b_adc, HHI_GCLK_MPEG1, 13);
 static MESON_GATE(meson8b_blkmv, HHI_GCLK_MPEG1, 14);
 static MESON_GATE(meson8b_aiu, HHI_GCLK_MPEG1, 15);
 static MESON_GATE(meson8b_uart1, HHI_GCLK_MPEG1, 16);
@@ -2659,6 +2651,19 @@ static MESON_GATE(meson8b_vclk2_vencl, HHI_GCLK_OTHER, 25);
 static MESON_GATE(meson8b_vclk2_other, HHI_GCLK_OTHER, 26);
 static MESON_GATE(meson8b_edp, HHI_GCLK_OTHER, 31);
 
+/* AIU gates */
+#define MESON_AIU_GLUE_GATE(_name, _reg, _bit) \
+	MESON_PCLK(_name, _reg, _bit, &meson8b_aiu_glue.hw)
+
+static MESON_PCLK(meson8b_aiu_glue, HHI_GCLK_MPEG1, 6, &meson8b_aiu.hw);
+static MESON_AIU_GLUE_GATE(meson8b_iec958, HHI_GCLK_MPEG1, 7);
+static MESON_AIU_GLUE_GATE(meson8b_i2s_out, HHI_GCLK_MPEG1, 8);
+static MESON_AIU_GLUE_GATE(meson8b_amclk, HHI_GCLK_MPEG1, 9);
+static MESON_AIU_GLUE_GATE(meson8b_aififo2, HHI_GCLK_MPEG1, 10);
+static MESON_AIU_GLUE_GATE(meson8b_mixer, HHI_GCLK_MPEG1, 11);
+static MESON_AIU_GLUE_GATE(meson8b_mixer_iface, HHI_GCLK_MPEG1, 12);
+static MESON_AIU_GLUE_GATE(meson8b_adc, HHI_GCLK_MPEG1, 13);
+
 /* Always On (AO) domain gates */
 
 static MESON_GATE(meson8b_ao_media_cpu, HHI_GCLK_AO, 0);
-- 
cgit v1.2.3-59-g8ed1b


From 068e7f85234c0b56f55cc0259ad9c05f2c64b8fb Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 18 Feb 2020 12:25:25 +0100
Subject: clk: renesas: Remove use of ARCH_R8A7795

CONFIG_ARCH_R8A7795 was split in CONFIG_ARCH_R8A77950 and
CONFIG_ARCH_R8A77951 in commit b925adfceb529389 ("soc: renesas: Add
ARCH_R8A7795[01] for existing R-Car H3"), so its users can be removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200218112525.5834-1-geert+renesas@glider.be
---
 drivers/clk/renesas/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 250d8165167a..879d96ead06b 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -20,7 +20,7 @@ config CLK_RENESAS
 	select CLK_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
 	select CLK_R8A7792 if ARCH_R8A7792
 	select CLK_R8A7794 if ARCH_R8A7794
-	select CLK_R8A7795 if ARCH_R8A77950 || ARCH_R8A77951 || ARCH_R8A7795
+	select CLK_R8A7795 if ARCH_R8A77950 || ARCH_R8A77951
 	select CLK_R8A77960 if ARCH_R8A77960
 	select CLK_R8A77961 if ARCH_R8A77961
 	select CLK_R8A77965 if ARCH_R8A77965
-- 
cgit v1.2.3-59-g8ed1b


From c267bd443f38972ab4ad29976f15f5eee9ed6f45 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 19 Feb 2020 14:04:09 +0800
Subject: clk: imx8mp: Rename the IMX8MP_CLK_HDMI_27M clock

On i.MX8MP, internal HDMI 27M clock is actually 24MHz, so rename
the IMX8MP_CLK_HDMI_27M to IMX8MP_CLK_HDMI_24M.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mp.c             | 4 ++--
 include/dt-bindings/clock/imx8mp-clock.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index 3adc8aa46200..a6313cf4a30c 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -342,7 +342,7 @@ static const char * const imx8mp_hdmi_fdcc_tst_sels[] = {"osc_24m", "sys_pll1_26
 							 "sys_pll1_800m", "sys_pll2_1000m", "sys_pll3_out",
 							 "audio_pll2_out", "video_pll1_out", };
 
-static const char * const imx8mp_hdmi_27m_sels[] = {"osc_24m", "sys_pll1_160m", "sys_pll2_50m",
+static const char * const imx8mp_hdmi_24m_sels[] = {"osc_24m", "sys_pll1_160m", "sys_pll2_50m",
 						    "sys_pll3_out", "audio_pll1_out", "video_pll1_out",
 						    "audio_pll2_out", "sys_pll1_133m", };
 
@@ -632,7 +632,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_IPP_DO_CLKO1] = imx8m_clk_hw_composite("ipp_do_clko1", imx8mp_ipp_do_clko1_sels, ccm_base + 0xba00);
 	hws[IMX8MP_CLK_IPP_DO_CLKO2] = imx8m_clk_hw_composite("ipp_do_clko2", imx8mp_ipp_do_clko2_sels, ccm_base + 0xba80);
 	hws[IMX8MP_CLK_HDMI_FDCC_TST] = imx8m_clk_hw_composite("hdmi_fdcc_tst", imx8mp_hdmi_fdcc_tst_sels, ccm_base + 0xbb00);
-	hws[IMX8MP_CLK_HDMI_27M] = imx8m_clk_hw_composite("hdmi_27m", imx8mp_hdmi_27m_sels, ccm_base + 0xbb80);
+	hws[IMX8MP_CLK_HDMI_24M] = imx8m_clk_hw_composite("hdmi_24m", imx8mp_hdmi_24m_sels, ccm_base + 0xbb80);
 	hws[IMX8MP_CLK_HDMI_REF_266M] = imx8m_clk_hw_composite("hdmi_ref_266m", imx8mp_hdmi_ref_266m_sels, ccm_base + 0xbc00);
 	hws[IMX8MP_CLK_USDHC3] = imx8m_clk_hw_composite("usdhc3", imx8mp_usdhc3_sels, ccm_base + 0xbc80);
 	hws[IMX8MP_CLK_MEDIA_CAM1_PIX] = imx8m_clk_hw_composite("media_cam1_pix", imx8mp_media_cam1_pix_sels, ccm_base + 0xbd00);
diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h
index 2fab63186bca..00d4d2288990 100644
--- a/include/dt-bindings/clock/imx8mp-clock.h
+++ b/include/dt-bindings/clock/imx8mp-clock.h
@@ -173,7 +173,7 @@
 #define IMX8MP_CLK_IPP_DO_CLKO1			164
 #define IMX8MP_CLK_IPP_DO_CLKO2			165
 #define IMX8MP_CLK_HDMI_FDCC_TST		166
-#define IMX8MP_CLK_HDMI_27M			167
+#define IMX8MP_CLK_HDMI_24M			167
 #define IMX8MP_CLK_HDMI_REF_266M		168
 #define IMX8MP_CLK_USDHC3			169
 #define IMX8MP_CLK_MEDIA_CAM1_PIX		170
-- 
cgit v1.2.3-59-g8ed1b


From d6fb02f054127c23b048f4753176c57f3e440e79 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 18:17:06 +0800
Subject: clk: imx: imx8mq: fix a53 cpu clock

The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which violates the CCM.

There is a CORE_SEL slice before A53 core, we need to configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.

The A53 CCM clk root should only be used when need to change ARM PLL
frequency.

Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clock

Fixes: db27e40b27f1 ("clk: imx8mq: Add the missing ARM clock")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mq.c             | 16 ++++++++++++----
 include/dt-bindings/clock/imx8mq-clock.h |  4 +++-
 2 files changed, 15 insertions(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 1f5ea1eaad65..b81f02ab7eb1 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -41,6 +41,8 @@ static const char * const video2_pll_out_sels[] = {"video2_pll1_ref_sel", };
 static const char * const imx8mq_a53_sels[] = {"osc_25m", "arm_pll_out", "sys2_pll_500m", "sys2_pll_1000m",
 					"sys1_pll_800m", "sys1_pll_400m", "audio_pll1_out", "sys3_pll_out", };
 
+static const char * const imx8mq_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char * const imx8mq_arm_m4_sels[] = {"osc_25m", "sys2_pll_200m", "sys2_pll_250m", "sys1_pll_266m",
 					"sys1_pll_800m", "audio_pll1_out", "video_pll1_out", "sys3_pll_out", };
 
@@ -425,6 +427,9 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_CLK_GPU_SHADER_CG] = hws[IMX8MQ_CLK_GPU_SHADER];
 	hws[IMX8MQ_CLK_GPU_SHADER_DIV] = hws[IMX8MQ_CLK_GPU_SHADER];
 
+	/* CORE SEL */
+	hws[IMX8MQ_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mq_a53_core_sels, ARRAY_SIZE(imx8mq_a53_core_sels), CLK_IS_CRITICAL);
+
 	/* BUS */
 	hws[IMX8MQ_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mq_main_axi_sels, base + 0x8800);
 	hws[IMX8MQ_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mq_enet_axi_sels, base + 0x8880);
@@ -588,11 +593,14 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_GPT_3M_CLK] = imx_clk_hw_fixed_factor("gpt_3m", "osc_25m", 1, 8);
 	hws[IMX8MQ_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 
-	hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					   hws[IMX8MQ_CLK_A53_DIV]->clk,
-					   hws[IMX8MQ_CLK_A53_SRC]->clk,
+	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_SRC], hws[IMX8MQ_SYS1_PLL_800M]);
+	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_CORE], hws[IMX8MQ_ARM_PLL_OUT]);
+
+	hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					   hws[IMX8MQ_CLK_A53_CORE]->clk,
+					   hws[IMX8MQ_CLK_A53_CORE]->clk,
 					   hws[IMX8MQ_ARM_PLL_OUT]->clk,
-					   hws[IMX8MQ_SYS1_PLL_800M]->clk);
+					   hws[IMX8MQ_CLK_A53_DIV]->clk);
 
 	imx_check_clk_hws(hws, IMX8MQ_CLK_END);
 
diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h
index 2b88723310bd..9b8045d75b8b 100644
--- a/include/dt-bindings/clock/imx8mq-clock.h
+++ b/include/dt-bindings/clock/imx8mq-clock.h
@@ -429,6 +429,8 @@
 #define IMX8MQ_CLK_M4_CORE			287
 #define IMX8MQ_CLK_VPU_CORE			288
 
-#define IMX8MQ_CLK_END				289
+#define IMX8MQ_CLK_A53_CORE			289
+
+#define IMX8MQ_CLK_END				290
 
 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */
-- 
cgit v1.2.3-59-g8ed1b


From d3b70cd87e773bb298eb78fbafed68afaf06b1a2 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 18:17:07 +0800
Subject: clk: imx: imx8mm: fix a53 cpu clock

The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.

There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.

The A53 CCM clk root should only be used when need to change ARM PLL
frequency.

Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clock

Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c             | 16 ++++++++++++----
 include/dt-bindings/clock/imx8mm-clock.h |  4 +++-
 2 files changed, 15 insertions(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 481d20ae4e0b..9feda4f5b3d6 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -39,6 +39,8 @@ static const char *sys_pll3_bypass_sels[] = {"sys_pll3", "sys_pll3_ref_sel", };
 static const char *imx8mm_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pll2_500m", "sys_pll2_1000m",
 					"sys_pll1_800m", "sys_pll1_400m", "audio_pll1_out", "sys_pll3_out", };
 
+static const char * const imx8mm_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char *imx8mm_m4_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m", "sys_pll1_266m",
 				       "sys_pll1_800m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", };
 
@@ -437,6 +439,9 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_GPU2D_CG] = hws[IMX8MM_CLK_GPU2D_CORE];
 	hws[IMX8MM_CLK_GPU2D_DIV] = hws[IMX8MM_CLK_GPU2D_CORE];
 
+	/* CORE SEL */
+	hws[IMX8MM_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mm_a53_core_sels, ARRAY_SIZE(imx8mm_a53_core_sels), CLK_IS_CRITICAL);
+
 	/* BUS */
 	hws[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi",  imx8mm_main_axi_sels, base + 0x8800);
 	hws[IMX8MM_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mm_enet_axi_sels, base + 0x8880);
@@ -603,11 +608,14 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 	hws[IMX8MM_CLK_DRAM_CORE] = imx_clk_hw_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mm_dram_core_sels, ARRAY_SIZE(imx8mm_dram_core_sels), CLK_IS_CRITICAL);
 
-	hws[IMX8MM_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					   hws[IMX8MM_CLK_A53_DIV]->clk,
-					   hws[IMX8MM_CLK_A53_SRC]->clk,
+	clk_hw_set_parent(hws[IMX8MM_CLK_A53_SRC], hws[IMX8MM_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MM_CLK_A53_CORE], hws[IMX8MM_ARM_PLL_OUT]);
+
+	hws[IMX8MM_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					   hws[IMX8MM_CLK_A53_CORE]->clk,
+					   hws[IMX8MM_CLK_A53_CORE]->clk,
 					   hws[IMX8MM_ARM_PLL_OUT]->clk,
-					   hws[IMX8MM_SYS_PLL1_800M]->clk);
+					   hws[IMX8MM_CLK_A53_DIV]->clk);
 
 	imx_check_clk_hws(hws, IMX8MM_CLK_END);
 
diff --git a/include/dt-bindings/clock/imx8mm-clock.h b/include/dt-bindings/clock/imx8mm-clock.h
index dbfee6579d6c..e63a5530aed7 100644
--- a/include/dt-bindings/clock/imx8mm-clock.h
+++ b/include/dt-bindings/clock/imx8mm-clock.h
@@ -272,6 +272,8 @@
 
 #define IMX8MM_CLK_CLKO2			250
 
-#define IMX8MM_CLK_END				251
+#define IMX8MM_CLK_A53_CORE			251
+
+#define IMX8MM_CLK_END				252
 
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From c69def88987995f5d3ea28f12febd1b2c567f511 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 18:17:08 +0800
Subject: clk: imx: imx8mn: fix a53 cpu clock

The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.

There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.

The A53 CCM clk root should only be used when need to change ARM PLL
frequency.

Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clk.

Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mn.c             | 16 ++++++++++++----
 include/dt-bindings/clock/imx8mn-clock.h |  4 +++-
 2 files changed, 15 insertions(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index fb47f86e35e8..83618affca8b 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -38,6 +38,8 @@ static const char * const imx8mn_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pl
 					       "sys_pll2_1000m", "sys_pll1_800m", "sys_pll1_400m",
 					       "audio_pll1_out", "sys_pll3_out", };
 
+static const char * const imx8mn_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char * const imx8mn_gpu_core_sels[] = {"osc_24m", "gpu_pll_out", "sys_pll1_800m",
 						    "sys_pll3_out", "sys_pll2_1000m", "audio_pll1_out",
 						    "video_pll1_out", "audio_pll2_out", };
@@ -425,6 +427,9 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MN_CLK_GPU_SHADER_CG] = hws[IMX8MN_CLK_GPU_SHADER];
 	hws[IMX8MN_CLK_GPU_SHADER_DIV] = hws[IMX8MN_CLK_GPU_SHADER];
 
+	/* CORE SEL */
+	hws[IMX8MN_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mn_a53_core_sels, ARRAY_SIZE(imx8mn_a53_core_sels), CLK_IS_CRITICAL);
+
 	/* BUS */
 	hws[IMX8MN_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mn_main_axi_sels, base + 0x8800);
 	hws[IMX8MN_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mn_enet_axi_sels, base + 0x8880);
@@ -554,11 +559,14 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	hws[IMX8MN_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 
-	hws[IMX8MN_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					   hws[IMX8MN_CLK_A53_DIV]->clk,
-					   hws[IMX8MN_CLK_A53_SRC]->clk,
+	clk_hw_set_parent(hws[IMX8MN_CLK_A53_SRC], hws[IMX8MN_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MN_CLK_A53_CORE], hws[IMX8MN_ARM_PLL_OUT]);
+
+	hws[IMX8MN_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					   hws[IMX8MN_CLK_A53_CORE]->clk,
+					   hws[IMX8MN_CLK_A53_CORE]->clk,
 					   hws[IMX8MN_ARM_PLL_OUT]->clk,
-					   hws[IMX8MN_SYS_PLL1_800M]->clk);
+					   hws[IMX8MN_CLK_A53_DIV]->clk);
 
 	imx_check_clk_hws(hws, IMX8MN_CLK_END);
 
diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h
index c42a22d3cf7c..6c4364c01c50 100644
--- a/include/dt-bindings/clock/imx8mn-clock.h
+++ b/include/dt-bindings/clock/imx8mn-clock.h
@@ -232,6 +232,8 @@
 #define IMX8MN_CLK_GPU_CORE			212
 #define IMX8MN_CLK_GPU_SHADER			213
 
-#define IMX8MN_CLK_END				214
+#define IMX8MN_CLK_A53_CORE			214
+
+#define IMX8MN_CLK_END				215
 
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From 7ab227210110a4137b005b7be3df1ec2d668ac96 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 18:17:09 +0800
Subject: clk: imx: imx8mp: fix a53 cpu clock

The A53 CCM clk root only accepts input up to 1GHz, CCM A53 root
signoff timing is 1Ghz, however the A53 core which sources from CCM
root could run above 1GHz which voilates the CCM.

There is a CORE_SEL slice before A53 core, we need configure the
CORE_SEL slice source from ARM PLL, not A53 CCM clk root.

The A53 CCM clk root should only be used when need to change ARM PLL
frequency.

Add arm_a53_core clk that could source from arm_a53_div and arm_pll_out.
Configure a53 ccm root sources from 800MHz sys pll
Configure a53 core sources from arm_pll_out
Mark arm_a53_core as critical clk

Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mp.c             | 16 ++++++++++++----
 include/dt-bindings/clock/imx8mp-clock.h |  3 ++-
 2 files changed, 14 insertions(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index a6313cf4a30c..c6161a4af201 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -34,6 +34,8 @@ static const char * const imx8mp_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pl
 					       "sys_pll2_1000m", "sys_pll1_800m", "sys_pll1_400m",
 					       "audio_pll1_out", "sys_pll3_out", };
 
+static const char * const imx8mp_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
+
 static const char * const imx8mp_m7_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m",
 					      "vpu_pll_out", "sys_pll1_800m", "audio_pll1_out",
 					      "video_pll1_out", "sys_pll3_out", };
@@ -554,6 +556,9 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_HSIO_AXI_DIV] = imx_clk_hw_divider2("hsio_axi_div", "hsio_axi_cg", ccm_base + 0x8380, 0, 3);
 	hws[IMX8MP_CLK_MEDIA_ISP_DIV] = imx_clk_hw_divider2("media_isp_div", "media_isp_cg", ccm_base + 0x8400, 0, 3);
 
+	/* CORE SEL */
+	hws[IMX8MP_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", ccm_base + 0x9880, 24, 1, imx8mp_a53_core_sels, ARRAY_SIZE(imx8mp_a53_core_sels), CLK_IS_CRITICAL);
+
 	hws[IMX8MP_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mp_main_axi_sels, ccm_base + 0x8800);
 	hws[IMX8MP_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mp_enet_axi_sels, ccm_base + 0x8880);
 	hws[IMX8MP_CLK_NAND_USDHC_BUS] = imx8m_clk_hw_composite_critical("nand_usdhc_bus", imx8mp_nand_usdhc_sels, ccm_base + 0x8900);
@@ -724,11 +729,14 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_VPU_ROOT] = imx_clk_hw_gate4("vpu_root_clk", "vpu_bus", ccm_base + 0x4630, 0);
 	hws[IMX8MP_CLK_AUDIO_ROOT] = imx_clk_hw_gate4("audio_root_clk", "ipg_root", ccm_base + 0x4650, 0);
 
-	hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_div",
-					     hws[IMX8MP_CLK_A53_DIV]->clk,
-					     hws[IMX8MP_CLK_A53_SRC]->clk,
+	clk_hw_set_parent(hws[IMX8MP_CLK_A53_SRC], hws[IMX8MP_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MP_CLK_A53_CORE], hws[IMX8MP_ARM_PLL_OUT]);
+
+	hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
+					     hws[IMX8MP_CLK_A53_CORE]->clk,
+					     hws[IMX8MP_CLK_A53_CORE]->clk,
 					     hws[IMX8MP_ARM_PLL_OUT]->clk,
-					     hws[IMX8MP_SYS_PLL1_800M]->clk);
+					     hws[IMX8MP_CLK_A53_DIV]->clk);
 
 	imx_check_clk_hws(hws, IMX8MP_CLK_END);
 
diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h
index 00d4d2288990..47ab082238b4 100644
--- a/include/dt-bindings/clock/imx8mp-clock.h
+++ b/include/dt-bindings/clock/imx8mp-clock.h
@@ -294,7 +294,8 @@
 #define IMX8MP_CLK_DRAM_ALT_ROOT		285
 #define IMX8MP_CLK_DRAM_CORE			286
 #define IMX8MP_CLK_ARM				287
+#define IMX8MP_CLK_A53_CORE			288
 
-#define IMX8MP_CLK_END				288
+#define IMX8MP_CLK_END				289
 
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From 530cf8d49f2a650625eee6ce28793bd7974e14bd Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Fri, 21 Feb 2020 14:31:56 +0800
Subject: clk: imx: pll14xx: Return error if pll type is invalid

When pll type is invalid, ONLY output error message is NOT enough,
should return error immediately.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-pll14xx.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-pll14xx.c b/drivers/clk/imx/clk-pll14xx.c
index 37e311e1d058..a83bbbee77d9 100644
--- a/drivers/clk/imx/clk-pll14xx.c
+++ b/drivers/clk/imx/clk-pll14xx.c
@@ -410,6 +410,8 @@ struct clk_hw *imx_clk_hw_pll14xx(const char *name, const char *parent_name,
 	default:
 		pr_err("%s: Unknown pll type for pll clk %s\n",
 		       __func__, name);
+		kfree(pll);
+		return ERR_PTR(-EINVAL);
 	};
 
 	pll->base = base;
-- 
cgit v1.2.3-59-g8ed1b


From eeca5721baeb11935dac85e71f7fd5a62919ed85 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Fri, 21 Feb 2020 14:59:36 +0800
Subject: clk: imx: clk-sscg-pll: Drop unnecessary initialization

No need to initialize 'ret' in many functions, as it will get
the return value from function call, so remove the initializtion
of 'ret'.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-sscg-pll.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-sscg-pll.c b/drivers/clk/imx/clk-sscg-pll.c
index acd1b9002be6..d4a2be16d132 100644
--- a/drivers/clk/imx/clk-sscg-pll.c
+++ b/drivers/clk/imx/clk-sscg-pll.c
@@ -195,10 +195,10 @@ static int clk_sscg_pll2_find_setup(struct clk_sscg_pll_setup *setup,
 					uint64_t ref)
 {
 
-	int ret = -EINVAL;
+	int ret;
 
 	if (ref < PLL_STAGE1_MIN_FREQ || ref > PLL_STAGE1_MAX_FREQ)
-		return ret;
+		return -EINVAL;
 
 	temp_setup->vco1 = ref;
 
@@ -254,10 +254,10 @@ static int clk_sscg_pll1_find_setup(struct clk_sscg_pll_setup *setup,
 					uint64_t ref)
 {
 
-	int ret = -EINVAL;
+	int ret;
 
 	if (ref < PLL_REF_MIN_FREQ || ref > PLL_REF_MAX_FREQ)
-		return ret;
+		return -EINVAL;
 
 	temp_setup->ref = ref;
 
@@ -428,7 +428,7 @@ static int __clk_sscg_pll_determine_rate(struct clk_hw *hw,
 	struct clk_sscg_pll_setup *setup = &pll->setup;
 	struct clk_hw *parent_hw = NULL;
 	int bypass_parent_index;
-	int ret = -EINVAL;
+	int ret;
 
 	req->max_rate = max;
 	req->min_rate = min;
@@ -467,10 +467,10 @@ static int clk_sscg_pll_determine_rate(struct clk_hw *hw,
 	uint64_t rate = req->rate;
 	uint64_t min = req->min_rate;
 	uint64_t max = req->max_rate;
-	int ret = -EINVAL;
+	int ret;
 
 	if (rate < PLL_OUT_MIN_FREQ || rate > PLL_OUT_MAX_FREQ)
-		return ret;
+		return -EINVAL;
 
 	ret = __clk_sscg_pll_determine_rate(hw, req, req->rate, req->rate,
 						rate, PLL_BYPASS2);
-- 
cgit v1.2.3-59-g8ed1b


From c3944ec8c6df256ab480b56cb776f36df44b2ba5 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Tue, 25 Feb 2020 14:42:48 +0100
Subject: clk: Fix phase init check

Commit 2760878662a2 ("clk: Bail out when calculating phase fails during
clk registration") introduced a check on error values at the time the
clock is registered to bail out when such an error occurs. However, it
doesn't check whether the returned value is positive which will happen
if the driver returns a non-zero phase. Since a phase is usually a
non-zero positive number this ends up returning something that isn't 0
to the caller of __clk_core_init(), making most clks fail to register
if they implement a phase clk op and return anything besides 0 for the
phase.

Fix this by returning the error if phase is less than zero or just
return zero if the phase is a positive number.

Fixes: 2760878662a2 ("clk: Bail out when calculating phase fails during clk registration")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lkml.kernel.org/r/20200225134248.919889-1-maxime@cerno.tech
Reported-by: "kernelci.org bot" <bot@kernelci.org>
[sboyd@kernel.org: Reword commit text to provide clarity]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/clk.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index ed1797857bae..4d6fd7de05ae 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3344,6 +3344,7 @@ static int __clk_core_init(struct clk_core *core)
 	int ret;
 	struct clk_core *parent;
 	unsigned long rate;
+	int phase;
 
 	if (!core)
 		return -EINVAL;
@@ -3457,8 +3458,9 @@ static int __clk_core_init(struct clk_core *core)
 	 * Since a phase is by definition relative to its parent, just
 	 * query the current clock phase, or just assume it's in phase.
 	 */
-	ret = clk_core_get_phase(core);
-	if (ret < 0) {
+	phase = clk_core_get_phase(core);
+	if (phase < 0) {
+		ret = phase;
 		pr_warn("%s: Failed to get phase for clk '%s'\n", __func__,
 			core->name);
 		goto out;
-- 
cgit v1.2.3-59-g8ed1b


From d894992502474a6e84644012deb14a0280acbf96 Mon Sep 17 00:00:00 2001
From: Jerome Brunet <jbrunet@baylibre.com>
Date: Tue, 3 Mar 2020 20:29:56 +0100
Subject: clk: rockchip: fix mmc get phase

If the mmc clock has no rate, it can be assumed to be constant.
In such case, there is no measurable phase shift. Just return 0
in this case instead of returning an error.

Fixes: 2760878662a2 ("clk: Bail out when calculating phase fails during clk registration")
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lkml.kernel.org/r/20200303192956.64410-1-jbrunet@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/rockchip/clk-mmc-phase.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c
index 4abe7ff31f53..975454a3dd72 100644
--- a/drivers/clk/rockchip/clk-mmc-phase.c
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
@@ -51,9 +51,9 @@ static int rockchip_mmc_get_phase(struct clk_hw *hw)
 	u16 degrees;
 	u32 delay_num = 0;
 
-	/* See the comment for rockchip_mmc_set_phase below */
+	/* Constant signal, no measurable phase shift */
 	if (!rate)
-		return -EINVAL;
+		return 0;
 
 	raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);
 
-- 
cgit v1.2.3-59-g8ed1b


From 80cf67dd010b4a187360bb8ce8a1974bdad8c076 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Wed, 4 Mar 2020 15:42:16 +0900
Subject: clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management

This hardware needs to enable clocks of both host and peripheral.
So, this patch adds multiple clocks management.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1583304137-28482-4-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/rcar-usb2-clock-sel.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/renesas/rcar-usb2-clock-sel.c b/drivers/clk/renesas/rcar-usb2-clock-sel.c
index b97f5f9326cf..d5f47ab017b7 100644
--- a/drivers/clk/renesas/rcar-usb2-clock-sel.c
+++ b/drivers/clk/renesas/rcar-usb2-clock-sel.c
@@ -26,9 +26,15 @@
 #define CLKSET0_PRIVATE		BIT(0)
 #define CLKSET0_EXTAL_ONLY	(CLKSET0_INTCLK_EN | CLKSET0_PRIVATE)
 
+static const struct clk_bulk_data rcar_usb2_clocks[] = {
+	{ .id = "ehci_ohci", },
+	{ .id = "hs-usb-if", },
+};
+
 struct usb2_clock_sel_priv {
 	void __iomem *base;
 	struct clk_hw hw;
+	struct clk_bulk_data clks[ARRAY_SIZE(rcar_usb2_clocks)];
 	bool extal;
 	bool xtal;
 };
@@ -53,14 +59,25 @@ static void usb2_clock_sel_disable_extal_only(struct usb2_clock_sel_priv *priv)
 
 static int usb2_clock_sel_enable(struct clk_hw *hw)
 {
-	usb2_clock_sel_enable_extal_only(to_priv(hw));
+	struct usb2_clock_sel_priv *priv = to_priv(hw);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(priv->clks), priv->clks);
+	if (ret)
+		return ret;
+
+	usb2_clock_sel_enable_extal_only(priv);
 
 	return 0;
 }
 
 static void usb2_clock_sel_disable(struct clk_hw *hw)
 {
-	usb2_clock_sel_disable_extal_only(to_priv(hw));
+	struct usb2_clock_sel_priv *priv = to_priv(hw);
+
+	usb2_clock_sel_disable_extal_only(priv);
+
+	clk_bulk_disable_unprepare(ARRAY_SIZE(priv->clks), priv->clks);
 }
 
 /*
@@ -119,6 +136,7 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
 	struct usb2_clock_sel_priv *priv;
 	struct clk *clk;
 	struct clk_init_data init;
+	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
@@ -128,6 +146,11 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
+	memcpy(priv->clks, rcar_usb2_clocks, sizeof(priv->clks));
+	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(priv->clks), priv->clks);
+	if (ret < 0)
+		return ret;
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-- 
cgit v1.2.3-59-g8ed1b


From 1ab4f43927a452ef24cd47ef686f3e1cbac9ab61 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Date: Wed, 4 Mar 2020 15:42:17 +0900
Subject: clk: renesas: rcar-usb2-clock-sel: Add reset_control

This hardware needs to deassert resets of both host and peripheral.
So, this patch adds reset control.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1583304137-28482-5-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clk/renesas/Kconfig               |  1 +
 drivers/clk/renesas/rcar-usb2-clock-sel.c | 15 ++++++++++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index 879d96ead06b..ac2dd92ce2ef 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -161,6 +161,7 @@ config CLK_RCAR_GEN3_CPG
 config CLK_RCAR_USB2_CLOCK_SEL
 	bool "Renesas R-Car USB2 clock selector support"
 	depends on ARCH_RENESAS || COMPILE_TEST
+	select RESET_CONTROLLER
 	help
 	  This is a driver for R-Car USB2 clock selector
 
diff --git a/drivers/clk/renesas/rcar-usb2-clock-sel.c b/drivers/clk/renesas/rcar-usb2-clock-sel.c
index d5f47ab017b7..d4c02986c34e 100644
--- a/drivers/clk/renesas/rcar-usb2-clock-sel.c
+++ b/drivers/clk/renesas/rcar-usb2-clock-sel.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 
 #define USB20_CLKSET0		0x00
@@ -35,6 +36,7 @@ struct usb2_clock_sel_priv {
 	void __iomem *base;
 	struct clk_hw hw;
 	struct clk_bulk_data clks[ARRAY_SIZE(rcar_usb2_clocks)];
+	struct reset_control *rsts;
 	bool extal;
 	bool xtal;
 };
@@ -62,10 +64,16 @@ static int usb2_clock_sel_enable(struct clk_hw *hw)
 	struct usb2_clock_sel_priv *priv = to_priv(hw);
 	int ret;
 
-	ret = clk_bulk_prepare_enable(ARRAY_SIZE(priv->clks), priv->clks);
+	ret = reset_control_deassert(priv->rsts);
 	if (ret)
 		return ret;
 
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(priv->clks), priv->clks);
+	if (ret) {
+		reset_control_assert(priv->rsts);
+		return ret;
+	}
+
 	usb2_clock_sel_enable_extal_only(priv);
 
 	return 0;
@@ -78,6 +86,7 @@ static void usb2_clock_sel_disable(struct clk_hw *hw)
 	usb2_clock_sel_disable_extal_only(priv);
 
 	clk_bulk_disable_unprepare(ARRAY_SIZE(priv->clks), priv->clks);
+	reset_control_assert(priv->rsts);
 }
 
 /*
@@ -151,6 +160,10 @@ static int rcar_usb2_clock_sel_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	priv->rsts = devm_reset_control_array_get(dev, true, false);
+	if (IS_ERR(priv->rsts))
+		return PTR_ERR(priv->rsts);
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-- 
cgit v1.2.3-59-g8ed1b


From dad4e7fda4bdc1a6357db500a7bab8843c08e521 Mon Sep 17 00:00:00 2001
From: Mike Tipton <mdtipton@codeaurora.org>
Date: Fri, 14 Feb 2020 18:12:32 -0800
Subject: clk: qcom: clk-rpmh: Wait for completion when enabling clocks

The current implementation always uses rpmh_write_async, which doesn't
wait for completion. That's fine for disable requests since there's no
immediate need for the clocks and they can be disabled in the
background. However, for enable requests we need to ensure the clocks
are actually enabled before returning to the client. Otherwise, clients
can end up accessing their HW before the necessary clocks are enabled,
which can lead to bus errors.

Use the synchronous version of this API (rpmh_write) for enable requests
in the active set to ensure completion.

Completion isn't required for sleep/wake sets, since they don't take
effect until after we enter sleep. All rpmh requests are automatically
flushed prior to entering sleep.

Fixes: 9c7e47025a6b ("clk: qcom: clk-rpmh: Add QCOM RPMh clock driver")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lkml.kernel.org/r/20200215021232.1149-1-mdtipton@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sboyd@kernel.org: Reorg code a bit for readability, rename to 'wait' to
make local variable not conflict with completion.h mechanism]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-rpmh.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 12bd8715dece..bfc29aec3a78 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -143,12 +143,22 @@ static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
 		!= (c->aggr_state & BIT(state));
 }
 
+static int clk_rpmh_send(struct clk_rpmh *c, enum rpmh_state state,
+			 struct tcs_cmd *cmd, bool wait)
+{
+	if (wait)
+		return rpmh_write(c->dev, state, cmd, 1);
+
+	return rpmh_write_async(c->dev, state, cmd, 1);
+}
+
 static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
 {
 	struct tcs_cmd cmd = { 0 };
 	u32 cmd_state, on_val;
 	enum rpmh_state state = RPMH_SLEEP_STATE;
 	int ret;
+	bool wait;
 
 	cmd.addr = c->res_addr;
 	cmd_state = c->aggr_state;
@@ -159,7 +169,8 @@ static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
 			if (cmd_state & BIT(state))
 				cmd.data = on_val;
 
-			ret = rpmh_write_async(c->dev, state, &cmd, 1);
+			wait = cmd_state && state == RPMH_ACTIVE_ONLY_STATE;
+			ret = clk_rpmh_send(c, state, &cmd, wait);
 			if (ret) {
 				dev_err(c->dev, "set %s state of %s failed: (%d)\n",
 					!state ? "sleep" :
@@ -267,7 +278,7 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable)
 	cmd.addr = c->res_addr;
 	cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
 
-	ret = rpmh_write_async(c->dev, RPMH_ACTIVE_ONLY_STATE, &cmd, 1);
+	ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable);
 	if (ret) {
 		dev_err(c->dev, "set active state of %s failed: (%d)\n",
 			c->res_name, ret);
-- 
cgit v1.2.3-59-g8ed1b


From 7d61e773c3ed8a4aea866eb287cc0191f9f35779 Mon Sep 17 00:00:00 2001
From: AngeloGioacchino Del Regno <kholk11@gmail.com>
Date: Thu, 31 Oct 2019 12:29:50 +0100
Subject: clk: qcom: smd: Add support for MSM8976 rpm clocks

Add rpm smd clocks, PMIC and bus clocks which are required on MSM8976,
MSM8956 (and APQ variants) for clients to vote on.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Link: https://lkml.kernel.org/r/20191031112951.35850-2-kholk11@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 50 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 0bbfef9fa6de..52f63ad787ba 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -525,6 +525,55 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8974 = {
 	.num_clks = ARRAY_SIZE(msm8974_clks),
 };
 
+
+/* msm8976 */
+DEFINE_CLK_SMD_RPM(msm8976, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8976, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8976, mmssnoc_ahb_clk, mmssnoc_ahb_a_clk,
+		   QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8976, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8976, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM_QDSS(msm8976, qdss_clk, qdss_a_clk,
+			QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8976, div_clk2, div_clk2_a, 12);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8976, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8976, bb_clk2_pin, bb_clk2_a_pin, 2);
+
+static struct clk_smd_rpm *msm8976_clks[] = {
+	[RPM_SMD_PCNOC_CLK] = &msm8976_pcnoc_clk,
+	[RPM_SMD_PCNOC_A_CLK] = &msm8976_pcnoc_a_clk,
+	[RPM_SMD_SNOC_CLK] = &msm8976_snoc_clk,
+	[RPM_SMD_SNOC_A_CLK] = &msm8976_snoc_a_clk,
+	[RPM_SMD_BIMC_CLK] = &msm8976_bimc_clk,
+	[RPM_SMD_BIMC_A_CLK] = &msm8976_bimc_a_clk,
+	[RPM_SMD_QDSS_CLK] = &msm8976_qdss_clk,
+	[RPM_SMD_QDSS_A_CLK] = &msm8976_qdss_a_clk,
+	[RPM_SMD_BB_CLK1] = &msm8976_bb_clk1,
+	[RPM_SMD_BB_CLK1_A] = &msm8976_bb_clk1_a,
+	[RPM_SMD_BB_CLK2] = &msm8976_bb_clk2,
+	[RPM_SMD_BB_CLK2_A] = &msm8976_bb_clk2_a,
+	[RPM_SMD_RF_CLK2] = &msm8976_rf_clk2,
+	[RPM_SMD_RF_CLK2_A] = &msm8976_rf_clk2_a,
+	[RPM_SMD_BB_CLK1_PIN] = &msm8976_bb_clk1_pin,
+	[RPM_SMD_BB_CLK1_A_PIN] = &msm8976_bb_clk1_a_pin,
+	[RPM_SMD_BB_CLK2_PIN] = &msm8976_bb_clk2_pin,
+	[RPM_SMD_BB_CLK2_A_PIN] = &msm8976_bb_clk2_a_pin,
+	[RPM_SMD_MMSSNOC_AHB_CLK] = &msm8976_mmssnoc_ahb_clk,
+	[RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8976_mmssnoc_ahb_a_clk,
+	[RPM_SMD_DIV_CLK2] = &msm8976_div_clk2,
+	[RPM_SMD_DIV_A_CLK2] = &msm8976_div_clk2_a,
+	[RPM_SMD_IPA_CLK] = &msm8976_ipa_clk,
+	[RPM_SMD_IPA_A_CLK] = &msm8976_ipa_a_clk,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8976 = {
+	.clks = msm8976_clks,
+	.num_clks = ARRAY_SIZE(msm8976_clks),
+};
+
 /* msm8996 */
 DEFINE_CLK_SMD_RPM(msm8996, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
 DEFINE_CLK_SMD_RPM(msm8996, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
@@ -720,6 +769,7 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
 static const struct of_device_id rpm_smd_clk_match_table[] = {
 	{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
 	{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
+	{ .compatible = "qcom,rpmcc-msm8976", .data = &rpm_clk_msm8976 },
 	{ .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
 	{ .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
 	{ .compatible = "qcom,rpmcc-qcs404",  .data = &rpm_clk_qcs404  },
-- 
cgit v1.2.3-59-g8ed1b


From 57d98e8e75bd6137a4e993913464c07802593d03 Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Mon, 24 Feb 2020 10:19:59 +0530
Subject: clk: qcom: clk-alpha-pll: Use common names for defines

The PLL run and standby modes are similar across the PLLs, thus rename
them to common names and update the use of these.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200224045003.3783838-2-vkoul@kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 40 +++++++++++++++++-----------------------
 1 file changed, 17 insertions(+), 23 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 6d946770a80f..0bdf6e45fac9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -134,15 +134,10 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define PLL_HUAYRA_N_MASK		0xff
 #define PLL_HUAYRA_ALPHA_WIDTH		16
 
-#define FABIA_OPMODE_STANDBY	0x0
-#define FABIA_OPMODE_RUN	0x1
-
-#define FABIA_PLL_OUT_MASK	0x7
-#define FABIA_PLL_RATE_MARGIN	500
-
-#define TRION_PLL_STANDBY	0x0
-#define TRION_PLL_RUN		0x1
-#define TRION_PLL_OUT_MASK	0x7
+#define PLL_STANDBY		0x0
+#define PLL_RUN			0x1
+#define PLL_OUT_MASK		0x7
+#define PLL_RATE_MARGIN		500
 
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
@@ -766,7 +761,7 @@ static int trion_pll_is_enabled(struct clk_alpha_pll *pll,
 	if (ret)
 		return 0;
 
-	return ((opmode_regval & TRION_PLL_RUN) && (mode_regval & PLL_OUTCTRL));
+	return ((opmode_regval & PLL_RUN) && (mode_regval & PLL_OUTCTRL));
 }
 
 static int clk_trion_pll_is_enabled(struct clk_hw *hw)
@@ -796,7 +791,7 @@ static int clk_trion_pll_enable(struct clk_hw *hw)
 	}
 
 	/* Set operation mode to RUN */
-	regmap_write(regmap, PLL_OPMODE(pll), TRION_PLL_RUN);
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
 
 	ret = wait_for_pll_enable_lock(pll);
 	if (ret)
@@ -804,7 +799,7 @@ static int clk_trion_pll_enable(struct clk_hw *hw)
 
 	/* Enable the PLL outputs */
 	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
-				 TRION_PLL_OUT_MASK, TRION_PLL_OUT_MASK);
+				 PLL_OUT_MASK, PLL_OUT_MASK);
 	if (ret)
 		return ret;
 
@@ -837,12 +832,12 @@ static void clk_trion_pll_disable(struct clk_hw *hw)
 
 	/* Disable the PLL outputs */
 	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
-				 TRION_PLL_OUT_MASK, 0);
+				 PLL_OUT_MASK, 0);
 	if (ret)
 		return;
 
 	/* Place the PLL mode in STANDBY */
-	regmap_write(regmap, PLL_OPMODE(pll), TRION_PLL_STANDBY);
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
 	regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
 }
 
@@ -1089,14 +1084,14 @@ static int alpha_pll_fabia_enable(struct clk_hw *hw)
 		return ret;
 
 	/* Skip If PLL is already running */
-	if ((opmode_val & FABIA_OPMODE_RUN) && (val & PLL_OUTCTRL))
+	if ((opmode_val & PLL_RUN) && (val & PLL_OUTCTRL))
 		return 0;
 
 	ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
 	if (ret)
 		return ret;
 
-	ret = regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_STANDBY);
+	ret = regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
 	if (ret)
 		return ret;
 
@@ -1105,7 +1100,7 @@ static int alpha_pll_fabia_enable(struct clk_hw *hw)
 	if (ret)
 		return ret;
 
-	ret = regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_RUN);
+	ret = regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
 	if (ret)
 		return ret;
 
@@ -1114,7 +1109,7 @@ static int alpha_pll_fabia_enable(struct clk_hw *hw)
 		return ret;
 
 	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
-				 FABIA_PLL_OUT_MASK, FABIA_PLL_OUT_MASK);
+				 PLL_OUT_MASK, PLL_OUT_MASK);
 	if (ret)
 		return ret;
 
@@ -1144,13 +1139,12 @@ static void alpha_pll_fabia_disable(struct clk_hw *hw)
 		return;
 
 	/* Disable main outputs */
-	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), FABIA_PLL_OUT_MASK,
-				 0);
+	ret = regmap_update_bits(regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
 	if (ret)
 		return;
 
 	/* Place the PLL in STANDBY */
-	regmap_write(regmap, PLL_OPMODE(pll), FABIA_OPMODE_STANDBY);
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
 }
 
 static unsigned long alpha_pll_fabia_recalc_rate(struct clk_hw *hw,
@@ -1171,7 +1165,7 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
 	u32 l, alpha_width = pll_alpha_width(pll);
 	u64 a;
-	unsigned long rrate, max = rate + FABIA_PLL_RATE_MARGIN;
+	unsigned long rrate, max = rate + PLL_RATE_MARGIN;
 
 	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
 
@@ -1230,7 +1224,7 @@ static int alpha_pll_fabia_prepare(struct clk_hw *hw)
 	 * Due to a limited number of bits for fractional rate programming, the
 	 * rounded up rate could be marginally higher than the requested rate.
 	 */
-	if (rrate > (cal_freq + FABIA_PLL_RATE_MARGIN) || rrate < cal_freq)
+	if (rrate > (cal_freq + PLL_RATE_MARGIN) || rrate < cal_freq)
 		return -EINVAL;
 
 	/* Setup PLL for calibration frequency */
-- 
cgit v1.2.3-59-g8ed1b


From ee4adbbc9087eb22bca631fb6efb93c62f1761b1 Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Mon, 24 Feb 2020 10:20:00 +0530
Subject: clk: qcom: clk-alpha-pll: Refactor trion PLL

Remove duplicate function for calculating the round rate of PLL and also
update the trion pll ops to use the common function.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200224045003.3783838-3-vkoul@kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 33 ++++++---------------------------
 1 file changed, 6 insertions(+), 27 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 0bdf6e45fac9..0adec585eb4f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -845,33 +845,12 @@ static unsigned long
 clk_trion_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 {
 	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
-	struct regmap *regmap = pll->clkr.regmap;
-	u32 l, frac;
-	u64 prate = parent_rate;
-
-	regmap_read(regmap, PLL_L_VAL(pll), &l);
-	regmap_read(regmap, PLL_ALPHA_VAL(pll), &frac);
-
-	return alpha_pll_calc_rate(prate, l, frac, ALPHA_REG_16BIT_WIDTH);
-}
-
-static long clk_trion_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-				     unsigned long *prate)
-{
-	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
-	unsigned long min_freq, max_freq;
-	u32 l;
-	u64 a;
-
-	rate = alpha_pll_round_rate(rate, *prate,
-				    &l, &a, ALPHA_REG_16BIT_WIDTH);
-	if (!pll->vco_table || alpha_pll_find_vco(pll, rate))
-		return rate;
+	u32 l, frac, alpha_width = pll_alpha_width(pll);
 
-	min_freq = pll->vco_table[0].min_freq;
-	max_freq = pll->vco_table[pll->num_vco - 1].max_freq;
+	regmap_read(pll->clkr.regmap, PLL_L_VAL(pll), &l);
+	regmap_read(pll->clkr.regmap, PLL_ALPHA_VAL(pll), &frac);
 
-	return clamp(rate, min_freq, max_freq);
+	return alpha_pll_calc_rate(parent_rate, l, frac, alpha_width);
 }
 
 const struct clk_ops clk_alpha_pll_fixed_ops = {
@@ -917,7 +896,7 @@ const struct clk_ops clk_trion_fixed_pll_ops = {
 	.disable = clk_trion_pll_disable,
 	.is_enabled = clk_trion_pll_is_enabled,
 	.recalc_rate = clk_trion_pll_recalc_rate,
-	.round_rate = clk_trion_pll_round_rate,
+	.round_rate = clk_alpha_pll_round_rate,
 };
 EXPORT_SYMBOL_GPL(clk_trion_fixed_pll_ops);
 
@@ -1173,7 +1152,7 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate,
 	 * Due to limited number of bits for fractional rate programming, the
 	 * rounded up rate could be marginally higher than the requested rate.
 	 */
-	if (rrate > max || rrate < rate) {
+	if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
 		pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
 		       clk_hw_get_name(hw), rrate, rate, max);
 		return -EINVAL;
-- 
cgit v1.2.3-59-g8ed1b


From 59128c20a6a98ee454e5ad23fe28dc84d23b6234 Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Mon, 24 Feb 2020 10:20:01 +0530
Subject: clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs

Add programming sequence support for managing the Lucid PLLs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200224045003.3783838-4-vkoul@kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 193 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |  12 +++
 2 files changed, 205 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 0adec585eb4f..9b2dfa08acb2 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -52,6 +52,7 @@
 #define PLL_CONFIG_CTL_U1(p)	((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U1])
 #define PLL_TEST_CTL(p)		((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
 #define PLL_TEST_CTL_U(p)	((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
+#define PLL_TEST_CTL_U1(p)     ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U1])
 #define PLL_STATUS(p)		((p)->offset + (p)->regs[PLL_OFF_STATUS])
 #define PLL_OPMODE(p)		((p)->offset + (p)->regs[PLL_OFF_OPMODE])
 #define PLL_FRAC(p)		((p)->offset + (p)->regs[PLL_OFF_FRAC])
@@ -116,6 +117,22 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_ALPHA_VAL] = 0x40,
 		[PLL_OFF_CAL_VAL] = 0x44,
 	},
+	[CLK_ALPHA_PLL_TYPE_LUCID] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_CAL_L_VAL] = 0x08,
+		[PLL_OFF_USER_CTL] = 0x0c,
+		[PLL_OFF_USER_CTL_U] = 0x10,
+		[PLL_OFF_USER_CTL_U1] = 0x14,
+		[PLL_OFF_CONFIG_CTL] = 0x18,
+		[PLL_OFF_CONFIG_CTL_U] = 0x1c,
+		[PLL_OFF_CONFIG_CTL_U1] = 0x20,
+		[PLL_OFF_TEST_CTL] = 0x24,
+		[PLL_OFF_TEST_CTL_U] = 0x28,
+		[PLL_OFF_TEST_CTL_U1] = 0x2c,
+		[PLL_OFF_STATUS] = 0x30,
+		[PLL_OFF_OPMODE] = 0x38,
+		[PLL_OFF_ALPHA_VAL] = 0x40,
+	},
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
@@ -139,6 +156,10 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 #define PLL_OUT_MASK		0x7
 #define PLL_RATE_MARGIN		500
 
+/* LUCID PLL specific settings and offsets */
+#define LUCID_PLL_CAL_VAL	0x44
+#define LUCID_PCAL_DONE		BIT(26)
+
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
 				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -1370,3 +1391,175 @@ const struct clk_ops clk_alpha_pll_postdiv_fabia_ops = {
 	.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
+
+/**
+ * clk_lucid_pll_configure - configure the lucid pll
+ *
+ * @pll: clk alpha pll
+ * @regmap: register map
+ * @config: configuration to apply for pll
+ */
+void clk_lucid_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			     const struct alpha_pll_config *config)
+{
+	if (config->l)
+		regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+	regmap_write(regmap, PLL_CAL_L_VAL(pll), LUCID_PLL_CAL_VAL);
+
+	if (config->alpha)
+		regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+	if (config->config_ctl_val)
+		regmap_write(regmap, PLL_CONFIG_CTL(pll),
+			     config->config_ctl_val);
+
+	if (config->config_ctl_hi_val)
+		regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+			     config->config_ctl_hi_val);
+
+	if (config->config_ctl_hi1_val)
+		regmap_write(regmap, PLL_CONFIG_CTL_U1(pll),
+			     config->config_ctl_hi1_val);
+
+	if (config->user_ctl_val)
+		regmap_write(regmap, PLL_USER_CTL(pll),
+			     config->user_ctl_val);
+
+	if (config->user_ctl_hi_val)
+		regmap_write(regmap, PLL_USER_CTL_U(pll),
+			     config->user_ctl_hi_val);
+
+	if (config->user_ctl_hi1_val)
+		regmap_write(regmap, PLL_USER_CTL_U1(pll),
+			     config->user_ctl_hi1_val);
+
+	if (config->test_ctl_val)
+		regmap_write(regmap, PLL_TEST_CTL(pll),
+			     config->test_ctl_val);
+
+	if (config->test_ctl_hi_val)
+		regmap_write(regmap, PLL_TEST_CTL_U(pll),
+			     config->test_ctl_hi_val);
+
+	if (config->test_ctl_hi1_val)
+		regmap_write(regmap, PLL_TEST_CTL_U1(pll),
+			     config->test_ctl_hi1_val);
+
+	regmap_update_bits(regmap, PLL_MODE(pll), PLL_UPDATE_BYPASS,
+			   PLL_UPDATE_BYPASS);
+
+	/* Disable PLL output */
+	regmap_update_bits(regmap, PLL_MODE(pll),  PLL_OUTCTRL, 0);
+
+	/* Set operation mode to OFF */
+	regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
+
+	/* Place the PLL in STANDBY mode */
+	regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+}
+EXPORT_SYMBOL_GPL(clk_lucid_pll_configure);
+
+/*
+ * The Lucid PLL requires a power-on self-calibration which happens when the
+ * PLL comes out of reset. Calibrate in case it is not completed.
+ */
+static int alpha_pll_lucid_prepare(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 regval;
+	int ret;
+
+	/* Return early if calibration is not needed. */
+	regmap_read(pll->clkr.regmap, PLL_STATUS(pll), &regval);
+	if (regval & LUCID_PCAL_DONE)
+		return 0;
+
+	/* On/off to calibrate */
+	ret = clk_trion_pll_enable(hw);
+	if (!ret)
+		clk_trion_pll_disable(hw);
+
+	return ret;
+}
+
+static int alpha_pll_lucid_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long prate)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	unsigned long rrate;
+	u32 regval, l, alpha_width = pll_alpha_width(pll);
+	u64 a;
+	int ret;
+
+	rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+	/*
+	 * Due to a limited number of bits for fractional rate programming, the
+	 * rounded up rate could be marginally higher than the requested rate.
+	 */
+	if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+		pr_err("Call set rate on the PLL with rounded rates!\n");
+		return -EINVAL;
+	}
+
+	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+	/* Latch the PLL input */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
+				 PLL_UPDATE, PLL_UPDATE);
+	if (ret)
+		return ret;
+
+	/* Wait for 2 reference cycles before checking the ACK bit. */
+	udelay(1);
+	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &regval);
+	if (!(regval & ALPHA_PLL_ACK_LATCH)) {
+		pr_err("Lucid PLL latch failed. Output may be unstable!\n");
+		return -EINVAL;
+	}
+
+	/* Return the latch input to 0 */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll),
+				 PLL_UPDATE, 0);
+	if (ret)
+		return ret;
+
+	if (clk_hw_is_enabled(hw)) {
+		ret = wait_for_pll_enable_lock(pll);
+		if (ret)
+			return ret;
+	}
+
+	/* Wait for PLL output to stabilize */
+	udelay(100);
+	return 0;
+}
+
+const struct clk_ops clk_alpha_pll_lucid_ops = {
+	.prepare = alpha_pll_lucid_prepare,
+	.enable = clk_trion_pll_enable,
+	.disable = clk_trion_pll_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = alpha_pll_lucid_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_lucid_ops);
+
+const struct clk_ops clk_alpha_pll_fixed_lucid_ops = {
+	.enable = clk_trion_pll_enable,
+	.disable = clk_trion_pll_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_lucid_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+	.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index fbc1f67c7a26..704674a153b6 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -14,6 +14,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_BRAMMO,
 	CLK_ALPHA_PLL_TYPE_FABIA,
 	CLK_ALPHA_PLL_TYPE_TRION,
+	CLK_ALPHA_PLL_TYPE_LUCID,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
@@ -30,6 +31,7 @@ enum {
 	PLL_OFF_CONFIG_CTL_U1,
 	PLL_OFF_TEST_CTL,
 	PLL_OFF_TEST_CTL_U,
+	PLL_OFF_TEST_CTL_U1,
 	PLL_OFF_STATUS,
 	PLL_OFF_OPMODE,
 	PLL_OFF_FRAC,
@@ -94,10 +96,13 @@ struct alpha_pll_config {
 	u32 alpha_hi;
 	u32 config_ctl_val;
 	u32 config_ctl_hi_val;
+	u32 config_ctl_hi1_val;
 	u32 user_ctl_val;
 	u32 user_ctl_hi_val;
+	u32 user_ctl_hi1_val;
 	u32 test_ctl_val;
 	u32 test_ctl_hi_val;
+	u32 test_ctl_hi1_val;
 	u32 main_output_mask;
 	u32 aux_output_mask;
 	u32 aux2_output_mask;
@@ -123,10 +128,17 @@ extern const struct clk_ops clk_alpha_pll_fabia_ops;
 extern const struct clk_ops clk_alpha_pll_fixed_fabia_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_fabia_ops;
 
+extern const struct clk_ops clk_alpha_pll_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
+
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
 void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 				const struct alpha_pll_config *config);
+void clk_lucid_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			     const struct alpha_pll_config *config);
+
 extern const struct clk_ops clk_trion_fixed_pll_ops;
 extern const struct clk_ops clk_trion_pll_postdiv_ops;
 
-- 
cgit v1.2.3-59-g8ed1b


From 3e5770921a8846ed1071257398eb7cd369399412 Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Mon, 24 Feb 2020 10:20:03 +0530
Subject: clk: qcom: gcc: Add global clock controller driver for SM8250

Add the clocks supported in global clock controller, which clock the
peripherals like BLSPs, SDCC, USB, MDSS etc. Register all the clocks
to the clock framework for the clients to be able to request for them.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20200224045003.3783838-6-vkoul@kernel.org
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/Kconfig      |    7 +
 drivers/clk/qcom/Makefile     |    1 +
 drivers/clk/qcom/gcc-sm8250.c | 3690 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 3698 insertions(+)
 create mode 100644 drivers/clk/qcom/gcc-sm8250.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 15cdcdc9b3b8..af406a7c4aca 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -366,6 +366,13 @@ config SM_GCC_8150
 	  Say Y if you want to use peripheral devices such as UART,
 	  SPI, I2C, USB, SD/UFS, PCIe etc.
 
+config SM_GCC_8250
+	tristate "SM8250 Global Clock Controller"
+	help
+	  Support for the global clock controller on SM8250 devices.
+	  Say Y if you want to use peripheral devices such as UART,
+	  SPI, I2C, USB, SD/UFS, PCIe etc.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 656a87e629d4..bd6556b829c0 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o
 obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o
 obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o
+obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/gcc-sm8250.c b/drivers/clk/qcom/gcc-sm8250.c
new file mode 100644
index 000000000000..6cb6617b8d88
--- /dev/null
+++ b/drivers/clk/qcom/gcc-sm8250.c
@@ -0,0 +1,3690 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gcc-sm8250.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	P_BI_TCXO,
+	P_AUD_REF_CLK,
+	P_CORE_BI_PLL_TEST_SE,
+	P_GPLL0_OUT_EVEN,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL4_OUT_MAIN,
+	P_GPLL9_OUT_MAIN,
+	P_SLEEP_CLK,
+};
+
+static struct clk_alpha_pll gpll0 = {
+	.offset = 0x0,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.enable_reg = 0x52018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_lucid_ops,
+		},
+	},
+};
+
+static const struct clk_div_table post_div_table_gpll0_out_even[] = {
+	{ 0x1, 2 },
+	{ }
+};
+
+static struct clk_alpha_pll_postdiv gpll0_out_even = {
+	.offset = 0x0,
+	.post_div_shift = 8,
+	.post_div_table = post_div_table_gpll0_out_even,
+	.num_post_div = ARRAY_SIZE(post_div_table_gpll0_out_even),
+	.width = 4,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpll0_out_even",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gpll0.clkr.hw,
+		},
+		.num_parents = 1,
+		.ops = &clk_alpha_pll_postdiv_lucid_ops,
+	},
+};
+
+static struct clk_alpha_pll gpll4 = {
+	.offset = 0x76000,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.enable_reg = 0x52018,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll4",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_lucid_ops,
+		},
+	},
+};
+
+static struct clk_alpha_pll gpll9 = {
+	.offset = 0x1c000,
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.enable_reg = 0x52018,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll9",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_fixed_lucid_ops,
+		},
+	},
+};
+
+static const struct parent_map gcc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_0[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct clk_parent_data gcc_parent_data_0_ao[] = {
+	{ .fw_name = "bi_tcxo_ao" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_SLEEP_CLK, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_1[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .fw_name = "sleep_clk" },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_2[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_SLEEP_CLK, 5 },
+};
+
+static const struct clk_parent_data gcc_parent_data_2[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .fw_name = "sleep_clk" },
+};
+
+static const struct parent_map gcc_parent_map_3[] = {
+	{ P_BI_TCXO, 0 },
+};
+
+static const struct clk_parent_data gcc_parent_data_3[] = {
+	{ .fw_name = "bi_tcxo" },
+};
+
+static const struct parent_map gcc_parent_map_4[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_GPLL9_OUT_MAIN, 2 },
+	{ P_GPLL4_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_4[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .hw = &gpll9.clkr.hw },
+	{ .hw = &gpll4.clkr.hw },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct parent_map gcc_parent_map_5[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPLL0_OUT_MAIN, 1 },
+	{ P_AUD_REF_CLK, 2 },
+	{ P_GPLL0_OUT_EVEN, 6 },
+};
+
+static const struct clk_parent_data gcc_parent_data_5[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &gpll0.clkr.hw },
+	{ .fw_name = "aud_ref_clk" },
+	{ .hw = &gpll0_out_even.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_gcc_cpuss_ahb_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_cpuss_ahb_clk_src = {
+	.cmd_rcgr = 0x48010,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_cpuss_ahb_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_cpuss_ahb_clk_src",
+		.parent_data = gcc_parent_data_0_ao,
+		.num_parents = 3,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_gp1_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_gp1_clk_src = {
+	.cmd_rcgr = 0x64004,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_1,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp1_clk_src",
+		.parent_data = gcc_parent_data_1,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_gp2_clk_src = {
+	.cmd_rcgr = 0x65004,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_1,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp2_clk_src",
+		.parent_data = gcc_parent_data_1,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_gp3_clk_src = {
+	.cmd_rcgr = 0x66004,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_1,
+	.freq_tbl = ftbl_gcc_gp1_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_gp3_clk_src",
+		.parent_data = gcc_parent_data_1,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_0_aux_clk_src[] = {
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pcie_0_aux_clk_src = {
+	.cmd_rcgr = 0x6b038,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_0_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_pcie_1_aux_clk_src = {
+	.cmd_rcgr = 0x8d038,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_1_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_pcie_2_aux_clk_src = {
+	.cmd_rcgr = 0x6038,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_2_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pcie_phy_refgen_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
+	.cmd_rcgr = 0x6f014,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_pcie_phy_refgen_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pcie_phy_refgen_clk_src",
+		.parent_data = gcc_parent_data_0_ao,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
+	F(9600000, P_BI_TCXO, 2, 0, 0),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(60000000, P_GPLL0_OUT_MAIN, 10, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_pdm2_clk_src = {
+	.cmd_rcgr = 0x33010,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_pdm2_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_pdm2_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
+	F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625),
+	F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(29491200, P_GPLL0_OUT_EVEN, 1, 1536, 15625),
+	F(32000000, P_GPLL0_OUT_EVEN, 1, 8, 75),
+	F(48000000, P_GPLL0_OUT_EVEN, 1, 4, 25),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(64000000, P_GPLL0_OUT_EVEN, 1, 16, 75),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(80000000, P_GPLL0_OUT_EVEN, 1, 4, 15),
+	F(96000000, P_GPLL0_OUT_EVEN, 1, 8, 25),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(102400000, P_GPLL0_OUT_EVEN, 1, 128, 375),
+	F(112000000, P_GPLL0_OUT_EVEN, 1, 28, 75),
+	F(117964800, P_GPLL0_OUT_EVEN, 1, 6144, 15625),
+	F(120000000, P_GPLL0_OUT_EVEN, 2.5, 0, 0),
+	{ }
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s0_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s0_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s0_clk_src = {
+	.cmd_rcgr = 0x17010,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s0_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s1_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s1_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s1_clk_src = {
+	.cmd_rcgr = 0x17140,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s1_clk_src_init,
+};
+
+static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s2_clk_src[] = {
+	F(7372800, P_GPLL0_OUT_EVEN, 1, 384, 15625),
+	F(14745600, P_GPLL0_OUT_EVEN, 1, 768, 15625),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(29491200, P_GPLL0_OUT_EVEN, 1, 1536, 15625),
+	F(32000000, P_GPLL0_OUT_EVEN, 1, 8, 75),
+	F(48000000, P_GPLL0_OUT_EVEN, 1, 4, 25),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(64000000, P_GPLL0_OUT_EVEN, 1, 16, 75),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(80000000, P_GPLL0_OUT_EVEN, 1, 4, 15),
+	F(96000000, P_GPLL0_OUT_EVEN, 1, 8, 25),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	{ }
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s2_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s2_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s2_clk_src = {
+	.cmd_rcgr = 0x17270,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s2_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s3_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s3_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s3_clk_src = {
+	.cmd_rcgr = 0x173a0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s3_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s4_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s4_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s4_clk_src = {
+	.cmd_rcgr = 0x174d0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s4_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s5_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s5_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s5_clk_src = {
+	.cmd_rcgr = 0x17600,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s5_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s6_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s6_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s6_clk_src = {
+	.cmd_rcgr = 0x17730,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s6_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap0_s7_clk_src_init = {
+	.name = "gcc_qupv3_wrap0_s7_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap0_s7_clk_src = {
+	.cmd_rcgr = 0x17860,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap0_s7_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s0_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s0_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s0_clk_src = {
+	.cmd_rcgr = 0x18010,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s0_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s1_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s1_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s1_clk_src = {
+	.cmd_rcgr = 0x18140,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s1_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s2_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s2_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s2_clk_src = {
+	.cmd_rcgr = 0x18270,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s2_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s3_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s3_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s3_clk_src = {
+	.cmd_rcgr = 0x183a0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s3_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s4_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s4_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s4_clk_src = {
+	.cmd_rcgr = 0x184d0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s4_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap1_s5_clk_src_init = {
+	.name = "gcc_qupv3_wrap1_s5_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap1_s5_clk_src = {
+	.cmd_rcgr = 0x18600,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap1_s5_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s0_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s0_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s0_clk_src = {
+	.cmd_rcgr = 0x1e010,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s0_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s0_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s1_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s1_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s1_clk_src = {
+	.cmd_rcgr = 0x1e140,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s1_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s2_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s2_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s2_clk_src = {
+	.cmd_rcgr = 0x1e270,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s2_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s3_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s3_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s3_clk_src = {
+	.cmd_rcgr = 0x1e3a0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s3_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s4_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s4_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s4_clk_src = {
+	.cmd_rcgr = 0x1e4d0,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s4_clk_src_init,
+};
+
+static struct clk_init_data gcc_qupv3_wrap2_s5_clk_src_init = {
+	.name = "gcc_qupv3_wrap2_s5_clk_src",
+	.parent_data = gcc_parent_data_0,
+	.num_parents = 3,
+	.ops = &clk_rcg2_ops,
+};
+
+static struct clk_rcg2 gcc_qupv3_wrap2_s5_clk_src = {
+	.cmd_rcgr = 0x1e600,
+	.mnd_width = 16,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_qupv3_wrap0_s2_clk_src,
+	.clkr.hw.init = &gcc_qupv3_wrap2_s5_clk_src_init,
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = {
+	F(400000, P_BI_TCXO, 12, 1, 4),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(202000000, P_GPLL9_OUT_MAIN, 4, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
+	.cmd_rcgr = 0x1400c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_4,
+	.freq_tbl = ftbl_gcc_sdcc2_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_sdcc2_apps_clk_src",
+		.parent_data = gcc_parent_data_4,
+		.num_parents = 5,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_sdcc4_apps_clk_src[] = {
+	F(400000, P_BI_TCXO, 12, 1, 4),
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_sdcc4_apps_clk_src = {
+	.cmd_rcgr = 0x1600c,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_sdcc4_apps_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_sdcc4_apps_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_tsif_ref_clk_src[] = {
+	F(105495, P_BI_TCXO, 2, 1, 91),
+	{ }
+};
+
+static struct clk_rcg2 gcc_tsif_ref_clk_src = {
+	.cmd_rcgr = 0x36010,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_5,
+	.freq_tbl = ftbl_gcc_tsif_ref_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_tsif_ref_clk_src",
+		.parent_data = gcc_parent_data_5,
+		.num_parents = 4,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_axi_clk_src[] = {
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(50000000, P_GPLL0_OUT_EVEN, 6, 0, 0),
+	F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_axi_clk_src = {
+	.cmd_rcgr = 0x75024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_axi_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_axi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_ice_core_clk_src[] = {
+	F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_ice_core_clk_src = {
+	.cmd_rcgr = 0x7506c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_ice_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_phy_aux_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_phy_aux_clk_src = {
+	.cmd_rcgr = 0x750a0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_3,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_3,
+		.num_parents = 1,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_card_unipro_core_clk_src[] = {
+	F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_MAIN, 8, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_card_unipro_core_clk_src = {
+	.cmd_rcgr = 0x75084,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_unipro_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_card_unipro_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_ufs_phy_axi_clk_src[] = {
+	F(25000000, P_GPLL0_OUT_EVEN, 12, 0, 0),
+	F(37500000, P_GPLL0_OUT_EVEN, 8, 0, 0),
+	F(75000000, P_GPLL0_OUT_EVEN, 4, 0, 0),
+	F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_ufs_phy_axi_clk_src = {
+	.cmd_rcgr = 0x77024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_phy_axi_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_axi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_ufs_phy_ice_core_clk_src = {
+	.cmd_rcgr = 0x7706c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_ice_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_ufs_phy_phy_aux_clk_src = {
+	.cmd_rcgr = 0x770a0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_3,
+	.freq_tbl = ftbl_gcc_pcie_0_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_3,
+		.num_parents = 1,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_ufs_phy_unipro_core_clk_src = {
+	.cmd_rcgr = 0x77084,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_ice_core_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_ufs_phy_unipro_core_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gcc_usb30_prim_master_clk_src[] = {
+	F(33333333, P_GPLL0_OUT_EVEN, 9, 0, 0),
+	F(66666667, P_GPLL0_OUT_EVEN, 4.5, 0, 0),
+	F(133333333, P_GPLL0_OUT_MAIN, 4.5, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN, 3, 0, 0),
+	F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gcc_usb30_prim_master_clk_src = {
+	.cmd_rcgr = 0xf020,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_usb30_prim_master_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_prim_master_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb30_prim_mock_utmi_clk_src = {
+	.cmd_rcgr = 0xf038,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_prim_mock_utmi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb30_sec_master_clk_src = {
+	.cmd_rcgr = 0x10020,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_usb30_prim_master_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_sec_master_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb30_sec_mock_utmi_clk_src = {
+	.cmd_rcgr = 0x10038,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_0,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb30_sec_mock_utmi_clk_src",
+		.parent_data = gcc_parent_data_0,
+		.num_parents = 3,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb3_prim_phy_aux_clk_src = {
+	.cmd_rcgr = 0xf064,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb3_prim_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 gcc_usb3_sec_phy_aux_clk_src = {
+	.cmd_rcgr = 0x10064,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gcc_parent_map_2,
+	.freq_tbl = ftbl_gcc_ufs_card_phy_aux_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gcc_usb3_sec_phy_aux_clk_src",
+		.parent_data = gcc_parent_data_2,
+		.num_parents = 2,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_cpuss_ahb_postdiv_clk_src = {
+	.reg = 0x48028,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_cpuss_ahb_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_cpuss_ahb_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_usb30_prim_mock_utmi_postdiv_clk_src = {
+	.reg = 0xf050,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_usb30_prim_mock_utmi_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_usb30_prim_mock_utmi_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div gcc_usb30_sec_mock_utmi_postdiv_clk_src = {
+	.reg = 0x10050,
+	.shift = 0,
+	.width = 2,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gcc_usb30_sec_mock_utmi_postdiv_clk_src",
+		.parent_data = &(const struct clk_parent_data){
+			.hw = &gcc_usb30_sec_mock_utmi_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch gcc_aggre_noc_pcie_tbu_clk = {
+	.halt_reg = 0x9000c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x9000c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_noc_pcie_tbu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_ufs_card_axi_clk = {
+	.halt_reg = 0x750cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x750cc,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x750cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_ufs_card_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_ufs_phy_axi_clk = {
+	.halt_reg = 0x770cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x770cc,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x770cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_ufs_phy_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_usb3_prim_axi_clk = {
+	.halt_reg = 0xf080,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xf080,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_usb3_prim_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_prim_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_aggre_usb3_sec_axi_clk = {
+	.halt_reg = 0x10080,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x10080,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_aggre_usb3_sec_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_sec_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_boot_rom_ahb_clk = {
+	.halt_reg = 0x38004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x38004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_boot_rom_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_camera_hf_axi_clk = {
+	.halt_reg = 0xb02c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb02c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_camera_hf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_camera_sf_axi_clk = {
+	.halt_reg = 0xb030,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb030,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_camera_sf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_camera_xo_clk = {
+	.halt_reg = 0xb040,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xb040,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_camera_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cfg_noc_usb3_prim_axi_clk = {
+	.halt_reg = 0xf07c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xf07c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cfg_noc_usb3_prim_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_prim_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cfg_noc_usb3_sec_axi_clk = {
+	.halt_reg = 0x1007c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1007c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cfg_noc_usb3_sec_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_sec_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cpuss_ahb_clk = {
+	.halt_reg = 0x48000,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(21),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cpuss_ahb_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_cpuss_ahb_postdiv_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cpuss_rbcpr_clk = {
+	.halt_reg = 0x48004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x48004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cpuss_rbcpr_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ddrss_gpu_axi_clk = {
+	.halt_reg = 0x71154,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x71154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ddrss_gpu_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ddrss_pcie_sf_tbu_clk = {
+	.halt_reg = 0x8d058,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8d058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ddrss_pcie_sf_tbu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_disp_hf_axi_clk = {
+	.halt_reg = 0xb034,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb034,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_disp_hf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_disp_sf_axi_clk = {
+	.halt_reg = 0xb038,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb038,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_disp_sf_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_disp_xo_clk = {
+	.halt_reg = 0xb044,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xb044,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_disp_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp1_clk = {
+	.halt_reg = 0x64000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x64000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp2_clk = {
+	.halt_reg = 0x65000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x65000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gp3_clk = {
+	.halt_reg = 0x66000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x66000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gp3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_gp3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_gpll0_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(15),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_gpll0_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(16),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_gpll0_div_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0_out_even.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_iref_en = {
+	.halt_reg = 0x8c014,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_iref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_memnoc_gfx_clk = {
+	.halt_reg = 0x7100c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x7100c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_memnoc_gfx_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_gpu_snoc_dvm_gfx_clk = {
+	.halt_reg = 0x71018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x71018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_gpu_snoc_dvm_gfx_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_axi_clk = {
+	.halt_reg = 0x4d008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x4d008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_bwmon_axi_clk = {
+	.halt_reg = 0x73008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x73008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_bwmon_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_bwmon_cfg_ahb_clk = {
+	.halt_reg = 0x73004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x73004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_bwmon_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_cfg_ahb_clk = {
+	.halt_reg = 0x4d004,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x4d004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x4d004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_dma_clk = {
+	.halt_reg = 0x4d00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x4d00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_dma_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_gpll0_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(18),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_gpll0_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_npu_gpll0_div_clk_src = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(19),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_npu_gpll0_div_clk_src",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gpll0_out_even.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie0_phy_refgen_clk = {
+	.halt_reg = 0x6f02c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f02c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie0_phy_refgen_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_phy_refgen_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie1_phy_refgen_clk = {
+	.halt_reg = 0x6f030,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f030,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie1_phy_refgen_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_phy_refgen_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie2_phy_refgen_clk = {
+	.halt_reg = 0x6f034,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f034,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie2_phy_refgen_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_phy_refgen_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_aux_clk = {
+	.halt_reg = 0x6b028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(3),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_0_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
+	.halt_reg = 0x6b024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6b024,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(2),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_mstr_axi_clk = {
+	.halt_reg = 0x6b01c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_pipe_clk = {
+	.halt_reg = 0x6b02c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_slv_axi_clk = {
+	.halt_reg = 0x6b014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6b014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_slv_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_0_slv_q2a_axi_clk = {
+	.halt_reg = 0x6b010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(5),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_0_slv_q2a_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_aux_clk = {
+	.halt_reg = 0x8d028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(29),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_1_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_cfg_ahb_clk = {
+	.halt_reg = 0x8d024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x8d024,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(28),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_mstr_axi_clk = {
+	.halt_reg = 0x8d01c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(27),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_pipe_clk = {
+	.halt_reg = 0x8d02c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(30),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_slv_axi_clk = {
+	.halt_reg = 0x8d014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x8d014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(26),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_slv_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_1_slv_q2a_axi_clk = {
+	.halt_reg = 0x8d010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(25),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_1_slv_q2a_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_aux_clk = {
+	.halt_reg = 0x6028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(14),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_2_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_cfg_ahb_clk = {
+	.halt_reg = 0x6024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6024,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(13),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_mstr_axi_clk = {
+	.halt_reg = 0x601c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(12),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_mstr_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_pipe_clk = {
+	.halt_reg = 0x602c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(15),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_slv_axi_clk = {
+	.halt_reg = 0x6014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x6014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_slv_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_2_slv_q2a_axi_clk = {
+	.halt_reg = 0x6010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_2_slv_q2a_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_mdm_clkref_en = {
+	.halt_reg = 0x8c00c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_mdm_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_phy_aux_clk = {
+	.halt_reg = 0x6f004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x6f004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pcie_0_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_wifi_clkref_en = {
+	.halt_reg = 0x8c004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_wifi_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pcie_wigig_clkref_en = {
+	.halt_reg = 0x8c008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pcie_wigig_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm2_clk = {
+	.halt_reg = 0x3300c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x3300c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_pdm2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm_ahb_clk = {
+	.halt_reg = 0x33004,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x33004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x33004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_pdm_xo4_clk = {
+	.halt_reg = 0x33008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x33008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_pdm_xo4_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_prng_ahb_clk = {
+	.halt_reg = 0x34004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52000,
+		.enable_mask = BIT(13),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_prng_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_camera_nrt_ahb_clk = {
+	.halt_reg = 0xb018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_camera_nrt_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_camera_rt_ahb_clk = {
+	.halt_reg = 0xb01c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb01c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb01c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_camera_rt_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_disp_ahb_clk = {
+	.halt_reg = 0xb020,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb020,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_disp_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_video_cvp_ahb_clk = {
+	.halt_reg = 0xb010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb010,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_video_cvp_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qmip_video_vcodec_ahb_clk = {
+	.halt_reg = 0xb014,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0xb014,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0xb014,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qmip_video_vcodec_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_core_2x_clk = {
+	.halt_reg = 0x23008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_core_2x_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_core_clk = {
+	.halt_reg = 0x23000,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(8),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
+	.halt_reg = 0x1700c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s0_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s1_clk = {
+	.halt_reg = 0x1713c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(11),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s2_clk = {
+	.halt_reg = 0x1726c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(12),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s3_clk = {
+	.halt_reg = 0x1739c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(13),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s4_clk = {
+	.halt_reg = 0x174cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(14),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s4_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s4_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s5_clk = {
+	.halt_reg = 0x175fc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(15),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s5_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s5_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s6_clk = {
+	.halt_reg = 0x1772c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(16),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s6_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s6_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap0_s7_clk = {
+	.halt_reg = 0x1785c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(17),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap0_s7_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap0_s7_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_core_2x_clk = {
+	.halt_reg = 0x23140,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(18),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_core_2x_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_core_clk = {
+	.halt_reg = 0x23138,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(19),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s0_clk = {
+	.halt_reg = 0x1800c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(22),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s0_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s1_clk = {
+	.halt_reg = 0x1813c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(23),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s2_clk = {
+	.halt_reg = 0x1826c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(24),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s3_clk = {
+	.halt_reg = 0x1839c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(25),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s4_clk = {
+	.halt_reg = 0x184cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(26),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s4_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s4_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap1_s5_clk = {
+	.halt_reg = 0x185fc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(27),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap1_s5_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap1_s5_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_core_2x_clk = {
+	.halt_reg = 0x23278,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(3),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_core_2x_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_core_clk = {
+	.halt_reg = 0x23270,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_core_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s0_clk = {
+	.halt_reg = 0x1e00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s0_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s0_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s1_clk = {
+	.halt_reg = 0x1e13c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(5),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s1_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s2_clk = {
+	.halt_reg = 0x1e26c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(6),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s2_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s2_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s3_clk = {
+	.halt_reg = 0x1e39c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s3_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s3_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s4_clk = {
+	.halt_reg = 0x1e4cc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(8),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s4_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s4_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap2_s5_clk = {
+	.halt_reg = 0x1e5fc,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(9),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap2_s5_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_qupv3_wrap2_s5_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_0_m_ahb_clk = {
+	.halt_reg = 0x17004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(6),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_0_m_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_0_s_ahb_clk = {
+	.halt_reg = 0x17008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x17008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(7),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_0_s_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_1_m_ahb_clk = {
+	.halt_reg = 0x18004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(20),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_1_m_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_1_s_ahb_clk = {
+	.halt_reg = 0x18008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x18008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52008,
+		.enable_mask = BIT(21),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_1_s_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_2_m_ahb_clk = {
+	.halt_reg = 0x1e004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(2),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_2_m_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_qupv3_wrap_2_s_ahb_clk = {
+	.halt_reg = 0x1e008,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x1e008,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52010,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_qupv3_wrap_2_s_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc2_ahb_clk = {
+	.halt_reg = 0x14008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x14008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc2_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc2_apps_clk = {
+	.halt_reg = 0x14004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x14004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc2_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_sdcc2_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc4_ahb_clk = {
+	.halt_reg = 0x16008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x16008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc4_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc4_apps_clk = {
+	.halt_reg = 0x16004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x16004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc4_apps_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_sdcc4_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_tsif_ahb_clk = {
+	.halt_reg = 0x36004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x36004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_tsif_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_tsif_inactivity_timers_clk = {
+	.halt_reg = 0x3600c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x3600c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_tsif_inactivity_timers_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_tsif_ref_clk = {
+	.halt_reg = 0x36008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x36008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_tsif_ref_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_tsif_ref_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_1x_clkref_en = {
+	.halt_reg = 0x8c000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_1x_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_ahb_clk = {
+	.halt_reg = 0x75018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x75018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x75018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_axi_clk = {
+	.halt_reg = 0x75010,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x75010,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x75010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_ice_core_clk = {
+	.halt_reg = 0x75064,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x75064,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x75064,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_ice_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_ice_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_phy_aux_clk = {
+	.halt_reg = 0x7509c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7509c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7509c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = {
+	.halt_reg = 0x75020,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x75020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_rx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = {
+	.halt_reg = 0x750b8,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x750b8,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_rx_symbol_1_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = {
+	.halt_reg = 0x7501c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x7501c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_tx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_card_unipro_core_clk = {
+	.halt_reg = 0x7505c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7505c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7505c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_card_unipro_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_card_unipro_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_ahb_clk = {
+	.halt_reg = 0x77018,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x77018,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x77018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_axi_clk = {
+	.halt_reg = 0x77010,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x77010,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x77010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_axi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_axi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_ice_core_clk = {
+	.halt_reg = 0x77064,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x77064,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x77064,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_ice_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_ice_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_phy_aux_clk = {
+	.halt_reg = 0x7709c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7709c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7709c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_rx_symbol_0_clk = {
+	.halt_reg = 0x77020,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x77020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_rx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_rx_symbol_1_clk = {
+	.halt_reg = 0x770b8,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x770b8,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_rx_symbol_1_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_tx_symbol_0_clk = {
+	.halt_reg = 0x7701c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x7701c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_tx_symbol_0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_ufs_phy_unipro_core_clk = {
+	.halt_reg = 0x7705c,
+	.halt_check = BRANCH_HALT,
+	.hwcg_reg = 0x7705c,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x7705c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_ufs_phy_unipro_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_ufs_phy_unipro_core_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_prim_master_clk = {
+	.halt_reg = 0xf010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xf010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_prim_master_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_prim_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_prim_mock_utmi_clk = {
+	.halt_reg = 0xf01c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf01c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_prim_mock_utmi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw =
+			&gcc_usb30_prim_mock_utmi_postdiv_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_prim_sleep_clk = {
+	.halt_reg = 0xf018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_prim_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_sec_master_clk = {
+	.halt_reg = 0x10010,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x10010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_sec_master_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb30_sec_master_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_sec_mock_utmi_clk = {
+	.halt_reg = 0x1001c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1001c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_sec_mock_utmi_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw =
+			&gcc_usb30_sec_mock_utmi_postdiv_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb30_sec_sleep_clk = {
+	.halt_reg = 0x10018,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x10018,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb30_sec_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_prim_phy_aux_clk = {
+	.halt_reg = 0xf054,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf054,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_prim_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = {
+	.halt_reg = 0xf058,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xf058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_com_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_prim_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
+	.halt_reg = 0xf05c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0xf05c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_clkref_en = {
+	.halt_reg = 0x8c010,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c010,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_phy_aux_clk = {
+	.halt_reg = 0x10054,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x10054,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_sec_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = {
+	.halt_reg = 0x10058,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x10058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_com_aux_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &gcc_usb3_sec_phy_aux_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
+	.halt_reg = 0x1005c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1005c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_video_axi0_clk = {
+	.halt_reg = 0xb024,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb024,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_video_axi0_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_video_axi1_clk = {
+	.halt_reg = 0xb028,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0xb028,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_video_axi1_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_video_xo_clk = {
+	.halt_reg = 0xb03c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0xb03c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_video_xo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc pcie_0_gdsc = {
+	.gdscr = 0x6b004,
+	.pd = {
+		.name = "pcie_0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc pcie_1_gdsc = {
+	.gdscr = 0x8d004,
+	.pd = {
+		.name = "pcie_1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc pcie_2_gdsc = {
+	.gdscr = 0x6004,
+	.pd = {
+		.name = "pcie_2_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc ufs_card_gdsc = {
+	.gdscr = 0x75004,
+	.pd = {
+		.name = "ufs_card_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc ufs_phy_gdsc = {
+	.gdscr = 0x77004,
+	.pd = {
+		.name = "ufs_phy_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc usb30_prim_gdsc = {
+	.gdscr = 0xf004,
+	.pd = {
+		.name = "usb30_prim_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc usb30_sec_gdsc = {
+	.gdscr = 0x10004,
+	.pd = {
+		.name = "usb30_sec_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc = {
+	.gdscr = 0x7d050,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc = {
+	.gdscr = 0x7d058,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf0_gdsc = {
+	.gdscr = 0x7d054,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_sf0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf1_gdsc = {
+	.gdscr = 0x7d06c,
+	.pd = {
+		.name = "hlos1_vote_mmnoc_mmu_tbu_sf1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct clk_regmap *gcc_sm8250_clocks[] = {
+	[GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr,
+	[GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr,
+	[GCC_AGGRE_UFS_PHY_AXI_CLK] = &gcc_aggre_ufs_phy_axi_clk.clkr,
+	[GCC_AGGRE_USB3_PRIM_AXI_CLK] = &gcc_aggre_usb3_prim_axi_clk.clkr,
+	[GCC_AGGRE_USB3_SEC_AXI_CLK] = &gcc_aggre_usb3_sec_axi_clk.clkr,
+	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
+	[GCC_CAMERA_HF_AXI_CLK] = &gcc_camera_hf_axi_clk.clkr,
+	[GCC_CAMERA_SF_AXI_CLK] = &gcc_camera_sf_axi_clk.clkr,
+	[GCC_CAMERA_XO_CLK] = &gcc_camera_xo_clk.clkr,
+	[GCC_CFG_NOC_USB3_PRIM_AXI_CLK] = &gcc_cfg_noc_usb3_prim_axi_clk.clkr,
+	[GCC_CFG_NOC_USB3_SEC_AXI_CLK] = &gcc_cfg_noc_usb3_sec_axi_clk.clkr,
+	[GCC_CPUSS_AHB_CLK] = &gcc_cpuss_ahb_clk.clkr,
+	[GCC_CPUSS_AHB_CLK_SRC] = &gcc_cpuss_ahb_clk_src.clkr,
+	[GCC_CPUSS_AHB_POSTDIV_CLK_SRC] = &gcc_cpuss_ahb_postdiv_clk_src.clkr,
+	[GCC_CPUSS_RBCPR_CLK] = &gcc_cpuss_rbcpr_clk.clkr,
+	[GCC_DDRSS_GPU_AXI_CLK] = &gcc_ddrss_gpu_axi_clk.clkr,
+	[GCC_DDRSS_PCIE_SF_TBU_CLK] = &gcc_ddrss_pcie_sf_tbu_clk.clkr,
+	[GCC_DISP_HF_AXI_CLK] = &gcc_disp_hf_axi_clk.clkr,
+	[GCC_DISP_SF_AXI_CLK] = &gcc_disp_sf_axi_clk.clkr,
+	[GCC_DISP_XO_CLK] = &gcc_disp_xo_clk.clkr,
+	[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+	[GCC_GP1_CLK_SRC] = &gcc_gp1_clk_src.clkr,
+	[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+	[GCC_GP2_CLK_SRC] = &gcc_gp2_clk_src.clkr,
+	[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+	[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
+	[GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
+	[GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
+	[GCC_GPU_IREF_EN] = &gcc_gpu_iref_en.clkr,
+	[GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
+	[GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr,
+	[GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr,
+	[GCC_NPU_BWMON_AXI_CLK] = &gcc_npu_bwmon_axi_clk.clkr,
+	[GCC_NPU_BWMON_CFG_AHB_CLK] = &gcc_npu_bwmon_cfg_ahb_clk.clkr,
+	[GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr,
+	[GCC_NPU_DMA_CLK] = &gcc_npu_dma_clk.clkr,
+	[GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr,
+	[GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr,
+	[GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr,
+	[GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr,
+	[GCC_PCIE2_PHY_REFGEN_CLK] = &gcc_pcie2_phy_refgen_clk.clkr,
+	[GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr,
+	[GCC_PCIE_0_AUX_CLK_SRC] = &gcc_pcie_0_aux_clk_src.clkr,
+	[GCC_PCIE_0_CFG_AHB_CLK] = &gcc_pcie_0_cfg_ahb_clk.clkr,
+	[GCC_PCIE_0_MSTR_AXI_CLK] = &gcc_pcie_0_mstr_axi_clk.clkr,
+	[GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr,
+	[GCC_PCIE_0_SLV_AXI_CLK] = &gcc_pcie_0_slv_axi_clk.clkr,
+	[GCC_PCIE_0_SLV_Q2A_AXI_CLK] = &gcc_pcie_0_slv_q2a_axi_clk.clkr,
+	[GCC_PCIE_1_AUX_CLK] = &gcc_pcie_1_aux_clk.clkr,
+	[GCC_PCIE_1_AUX_CLK_SRC] = &gcc_pcie_1_aux_clk_src.clkr,
+	[GCC_PCIE_1_CFG_AHB_CLK] = &gcc_pcie_1_cfg_ahb_clk.clkr,
+	[GCC_PCIE_1_MSTR_AXI_CLK] = &gcc_pcie_1_mstr_axi_clk.clkr,
+	[GCC_PCIE_1_PIPE_CLK] = &gcc_pcie_1_pipe_clk.clkr,
+	[GCC_PCIE_1_SLV_AXI_CLK] = &gcc_pcie_1_slv_axi_clk.clkr,
+	[GCC_PCIE_1_SLV_Q2A_AXI_CLK] = &gcc_pcie_1_slv_q2a_axi_clk.clkr,
+	[GCC_PCIE_2_AUX_CLK] = &gcc_pcie_2_aux_clk.clkr,
+	[GCC_PCIE_2_AUX_CLK_SRC] = &gcc_pcie_2_aux_clk_src.clkr,
+	[GCC_PCIE_2_CFG_AHB_CLK] = &gcc_pcie_2_cfg_ahb_clk.clkr,
+	[GCC_PCIE_2_MSTR_AXI_CLK] = &gcc_pcie_2_mstr_axi_clk.clkr,
+	[GCC_PCIE_2_PIPE_CLK] = &gcc_pcie_2_pipe_clk.clkr,
+	[GCC_PCIE_2_SLV_AXI_CLK] = &gcc_pcie_2_slv_axi_clk.clkr,
+	[GCC_PCIE_2_SLV_Q2A_AXI_CLK] = &gcc_pcie_2_slv_q2a_axi_clk.clkr,
+	[GCC_PCIE_MDM_CLKREF_EN] = &gcc_pcie_mdm_clkref_en.clkr,
+	[GCC_PCIE_PHY_AUX_CLK] = &gcc_pcie_phy_aux_clk.clkr,
+	[GCC_PCIE_PHY_REFGEN_CLK_SRC] = &gcc_pcie_phy_refgen_clk_src.clkr,
+	[GCC_PCIE_WIFI_CLKREF_EN] = &gcc_pcie_wifi_clkref_en.clkr,
+	[GCC_PCIE_WIGIG_CLKREF_EN] = &gcc_pcie_wigig_clkref_en.clkr,
+	[GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+	[GCC_PDM2_CLK_SRC] = &gcc_pdm2_clk_src.clkr,
+	[GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
+	[GCC_PDM_XO4_CLK] = &gcc_pdm_xo4_clk.clkr,
+	[GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
+	[GCC_QMIP_CAMERA_NRT_AHB_CLK] = &gcc_qmip_camera_nrt_ahb_clk.clkr,
+	[GCC_QMIP_CAMERA_RT_AHB_CLK] = &gcc_qmip_camera_rt_ahb_clk.clkr,
+	[GCC_QMIP_DISP_AHB_CLK] = &gcc_qmip_disp_ahb_clk.clkr,
+	[GCC_QMIP_VIDEO_CVP_AHB_CLK] = &gcc_qmip_video_cvp_ahb_clk.clkr,
+	[GCC_QMIP_VIDEO_VCODEC_AHB_CLK] = &gcc_qmip_video_vcodec_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP0_CORE_2X_CLK] = &gcc_qupv3_wrap0_core_2x_clk.clkr,
+	[GCC_QUPV3_WRAP0_CORE_CLK] = &gcc_qupv3_wrap0_core_clk.clkr,
+	[GCC_QUPV3_WRAP0_S0_CLK] = &gcc_qupv3_wrap0_s0_clk.clkr,
+	[GCC_QUPV3_WRAP0_S0_CLK_SRC] = &gcc_qupv3_wrap0_s0_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S1_CLK] = &gcc_qupv3_wrap0_s1_clk.clkr,
+	[GCC_QUPV3_WRAP0_S1_CLK_SRC] = &gcc_qupv3_wrap0_s1_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S2_CLK] = &gcc_qupv3_wrap0_s2_clk.clkr,
+	[GCC_QUPV3_WRAP0_S2_CLK_SRC] = &gcc_qupv3_wrap0_s2_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S3_CLK] = &gcc_qupv3_wrap0_s3_clk.clkr,
+	[GCC_QUPV3_WRAP0_S3_CLK_SRC] = &gcc_qupv3_wrap0_s3_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S4_CLK] = &gcc_qupv3_wrap0_s4_clk.clkr,
+	[GCC_QUPV3_WRAP0_S4_CLK_SRC] = &gcc_qupv3_wrap0_s4_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S5_CLK] = &gcc_qupv3_wrap0_s5_clk.clkr,
+	[GCC_QUPV3_WRAP0_S5_CLK_SRC] = &gcc_qupv3_wrap0_s5_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S6_CLK] = &gcc_qupv3_wrap0_s6_clk.clkr,
+	[GCC_QUPV3_WRAP0_S6_CLK_SRC] = &gcc_qupv3_wrap0_s6_clk_src.clkr,
+	[GCC_QUPV3_WRAP0_S7_CLK] = &gcc_qupv3_wrap0_s7_clk.clkr,
+	[GCC_QUPV3_WRAP0_S7_CLK_SRC] = &gcc_qupv3_wrap0_s7_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_CORE_2X_CLK] = &gcc_qupv3_wrap1_core_2x_clk.clkr,
+	[GCC_QUPV3_WRAP1_CORE_CLK] = &gcc_qupv3_wrap1_core_clk.clkr,
+	[GCC_QUPV3_WRAP1_S0_CLK] = &gcc_qupv3_wrap1_s0_clk.clkr,
+	[GCC_QUPV3_WRAP1_S0_CLK_SRC] = &gcc_qupv3_wrap1_s0_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S1_CLK] = &gcc_qupv3_wrap1_s1_clk.clkr,
+	[GCC_QUPV3_WRAP1_S1_CLK_SRC] = &gcc_qupv3_wrap1_s1_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S2_CLK] = &gcc_qupv3_wrap1_s2_clk.clkr,
+	[GCC_QUPV3_WRAP1_S2_CLK_SRC] = &gcc_qupv3_wrap1_s2_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S3_CLK] = &gcc_qupv3_wrap1_s3_clk.clkr,
+	[GCC_QUPV3_WRAP1_S3_CLK_SRC] = &gcc_qupv3_wrap1_s3_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S4_CLK] = &gcc_qupv3_wrap1_s4_clk.clkr,
+	[GCC_QUPV3_WRAP1_S4_CLK_SRC] = &gcc_qupv3_wrap1_s4_clk_src.clkr,
+	[GCC_QUPV3_WRAP1_S5_CLK] = &gcc_qupv3_wrap1_s5_clk.clkr,
+	[GCC_QUPV3_WRAP1_S5_CLK_SRC] = &gcc_qupv3_wrap1_s5_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_CORE_2X_CLK] = &gcc_qupv3_wrap2_core_2x_clk.clkr,
+	[GCC_QUPV3_WRAP2_CORE_CLK] = &gcc_qupv3_wrap2_core_clk.clkr,
+	[GCC_QUPV3_WRAP2_S0_CLK] = &gcc_qupv3_wrap2_s0_clk.clkr,
+	[GCC_QUPV3_WRAP2_S0_CLK_SRC] = &gcc_qupv3_wrap2_s0_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S1_CLK] = &gcc_qupv3_wrap2_s1_clk.clkr,
+	[GCC_QUPV3_WRAP2_S1_CLK_SRC] = &gcc_qupv3_wrap2_s1_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S2_CLK] = &gcc_qupv3_wrap2_s2_clk.clkr,
+	[GCC_QUPV3_WRAP2_S2_CLK_SRC] = &gcc_qupv3_wrap2_s2_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S3_CLK] = &gcc_qupv3_wrap2_s3_clk.clkr,
+	[GCC_QUPV3_WRAP2_S3_CLK_SRC] = &gcc_qupv3_wrap2_s3_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S4_CLK] = &gcc_qupv3_wrap2_s4_clk.clkr,
+	[GCC_QUPV3_WRAP2_S4_CLK_SRC] = &gcc_qupv3_wrap2_s4_clk_src.clkr,
+	[GCC_QUPV3_WRAP2_S5_CLK] = &gcc_qupv3_wrap2_s5_clk.clkr,
+	[GCC_QUPV3_WRAP2_S5_CLK_SRC] = &gcc_qupv3_wrap2_s5_clk_src.clkr,
+	[GCC_QUPV3_WRAP_0_M_AHB_CLK] = &gcc_qupv3_wrap_0_m_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_0_S_AHB_CLK] = &gcc_qupv3_wrap_0_s_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_1_M_AHB_CLK] = &gcc_qupv3_wrap_1_m_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_1_S_AHB_CLK] = &gcc_qupv3_wrap_1_s_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_2_M_AHB_CLK] = &gcc_qupv3_wrap_2_m_ahb_clk.clkr,
+	[GCC_QUPV3_WRAP_2_S_AHB_CLK] = &gcc_qupv3_wrap_2_s_ahb_clk.clkr,
+	[GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
+	[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
+	[GCC_SDCC2_APPS_CLK_SRC] = &gcc_sdcc2_apps_clk_src.clkr,
+	[GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr,
+	[GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr,
+	[GCC_SDCC4_APPS_CLK_SRC] = &gcc_sdcc4_apps_clk_src.clkr,
+	[GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr,
+	[GCC_TSIF_INACTIVITY_TIMERS_CLK] = &gcc_tsif_inactivity_timers_clk.clkr,
+	[GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr,
+	[GCC_TSIF_REF_CLK_SRC] = &gcc_tsif_ref_clk_src.clkr,
+	[GCC_UFS_1X_CLKREF_EN] = &gcc_ufs_1x_clkref_en.clkr,
+	[GCC_UFS_CARD_AHB_CLK] = &gcc_ufs_card_ahb_clk.clkr,
+	[GCC_UFS_CARD_AXI_CLK] = &gcc_ufs_card_axi_clk.clkr,
+	[GCC_UFS_CARD_AXI_CLK_SRC] = &gcc_ufs_card_axi_clk_src.clkr,
+	[GCC_UFS_CARD_ICE_CORE_CLK] = &gcc_ufs_card_ice_core_clk.clkr,
+	[GCC_UFS_CARD_ICE_CORE_CLK_SRC] = &gcc_ufs_card_ice_core_clk_src.clkr,
+	[GCC_UFS_CARD_PHY_AUX_CLK] = &gcc_ufs_card_phy_aux_clk.clkr,
+	[GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr,
+	[GCC_UFS_CARD_RX_SYMBOL_0_CLK] = &gcc_ufs_card_rx_symbol_0_clk.clkr,
+	[GCC_UFS_CARD_RX_SYMBOL_1_CLK] = &gcc_ufs_card_rx_symbol_1_clk.clkr,
+	[GCC_UFS_CARD_TX_SYMBOL_0_CLK] = &gcc_ufs_card_tx_symbol_0_clk.clkr,
+	[GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr,
+	[GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] =
+		&gcc_ufs_card_unipro_core_clk_src.clkr,
+	[GCC_UFS_PHY_AHB_CLK] = &gcc_ufs_phy_ahb_clk.clkr,
+	[GCC_UFS_PHY_AXI_CLK] = &gcc_ufs_phy_axi_clk.clkr,
+	[GCC_UFS_PHY_AXI_CLK_SRC] = &gcc_ufs_phy_axi_clk_src.clkr,
+	[GCC_UFS_PHY_ICE_CORE_CLK] = &gcc_ufs_phy_ice_core_clk.clkr,
+	[GCC_UFS_PHY_ICE_CORE_CLK_SRC] = &gcc_ufs_phy_ice_core_clk_src.clkr,
+	[GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr,
+	[GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr,
+	[GCC_UFS_PHY_RX_SYMBOL_0_CLK] = &gcc_ufs_phy_rx_symbol_0_clk.clkr,
+	[GCC_UFS_PHY_RX_SYMBOL_1_CLK] = &gcc_ufs_phy_rx_symbol_1_clk.clkr,
+	[GCC_UFS_PHY_TX_SYMBOL_0_CLK] = &gcc_ufs_phy_tx_symbol_0_clk.clkr,
+	[GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr,
+	[GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] =
+		&gcc_ufs_phy_unipro_core_clk_src.clkr,
+	[GCC_USB30_PRIM_MASTER_CLK] = &gcc_usb30_prim_master_clk.clkr,
+	[GCC_USB30_PRIM_MASTER_CLK_SRC] = &gcc_usb30_prim_master_clk_src.clkr,
+	[GCC_USB30_PRIM_MOCK_UTMI_CLK] = &gcc_usb30_prim_mock_utmi_clk.clkr,
+	[GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC] =
+		&gcc_usb30_prim_mock_utmi_clk_src.clkr,
+	[GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC] =
+		&gcc_usb30_prim_mock_utmi_postdiv_clk_src.clkr,
+	[GCC_USB30_PRIM_SLEEP_CLK] = &gcc_usb30_prim_sleep_clk.clkr,
+	[GCC_USB30_SEC_MASTER_CLK] = &gcc_usb30_sec_master_clk.clkr,
+	[GCC_USB30_SEC_MASTER_CLK_SRC] = &gcc_usb30_sec_master_clk_src.clkr,
+	[GCC_USB30_SEC_MOCK_UTMI_CLK] = &gcc_usb30_sec_mock_utmi_clk.clkr,
+	[GCC_USB30_SEC_MOCK_UTMI_CLK_SRC] =
+		&gcc_usb30_sec_mock_utmi_clk_src.clkr,
+	[GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC] =
+		&gcc_usb30_sec_mock_utmi_postdiv_clk_src.clkr,
+	[GCC_USB30_SEC_SLEEP_CLK] = &gcc_usb30_sec_sleep_clk.clkr,
+	[GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
+	[GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
+	[GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
+	[GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr,
+	[GCC_USB3_SEC_CLKREF_EN] = &gcc_usb3_sec_clkref_en.clkr,
+	[GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
+	[GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
+	[GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
+	[GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr,
+	[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
+	[GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
+	[GCC_VIDEO_XO_CLK] = &gcc_video_xo_clk.clkr,
+	[GPLL0] = &gpll0.clkr,
+	[GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
+	[GPLL4] = &gpll4.clkr,
+	[GPLL9] = &gpll9.clkr,
+};
+
+static struct gdsc *gcc_sm8250_gdscs[] = {
+	[PCIE_0_GDSC] = &pcie_0_gdsc,
+	[PCIE_1_GDSC] = &pcie_1_gdsc,
+	[PCIE_2_GDSC] = &pcie_2_gdsc,
+	[UFS_CARD_GDSC] = &ufs_card_gdsc,
+	[UFS_PHY_GDSC] = &ufs_phy_gdsc,
+	[USB30_PRIM_GDSC] = &usb30_prim_gdsc,
+	[USB30_SEC_GDSC] = &usb30_sec_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_sf0_gdsc,
+	[HLOS1_VOTE_MMNOC_MMU_TBU_SF1_GDSC] =
+					&hlos1_vote_mmnoc_mmu_tbu_sf1_gdsc,
+};
+
+static const struct qcom_reset_map gcc_sm8250_resets[] = {
+	[GCC_GPU_BCR] = { 0x71000 },
+	[GCC_MMSS_BCR] = { 0xb000 },
+	[GCC_NPU_BWMON_BCR] = { 0x73000 },
+	[GCC_NPU_BCR] = { 0x4d000 },
+	[GCC_PCIE_0_BCR] = { 0x6b000 },
+	[GCC_PCIE_0_LINK_DOWN_BCR] = { 0x6c014 },
+	[GCC_PCIE_0_NOCSR_COM_PHY_BCR] = { 0x6c020 },
+	[GCC_PCIE_0_PHY_BCR] = { 0x6c01c },
+	[GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR] = { 0x6c028 },
+	[GCC_PCIE_1_BCR] = { 0x8d000 },
+	[GCC_PCIE_1_LINK_DOWN_BCR] = { 0x8e014 },
+	[GCC_PCIE_1_NOCSR_COM_PHY_BCR] = { 0x8e020 },
+	[GCC_PCIE_1_PHY_BCR] = { 0x8e01c },
+	[GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR] = { 0x8e000 },
+	[GCC_PCIE_2_BCR] = { 0x6000 },
+	[GCC_PCIE_2_LINK_DOWN_BCR] = { 0x1f014 },
+	[GCC_PCIE_2_NOCSR_COM_PHY_BCR] = { 0x1f020 },
+	[GCC_PCIE_2_PHY_BCR] = { 0x1f01c },
+	[GCC_PCIE_2_PHY_NOCSR_COM_PHY_BCR] = { 0x1f028 },
+	[GCC_PCIE_PHY_BCR] = { 0x6f000 },
+	[GCC_PCIE_PHY_CFG_AHB_BCR] = { 0x6f00c },
+	[GCC_PCIE_PHY_COM_BCR] = { 0x6f010 },
+	[GCC_PDM_BCR] = { 0x33000 },
+	[GCC_PRNG_BCR] = { 0x34000 },
+	[GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 },
+	[GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 },
+	[GCC_QUPV3_WRAPPER_2_BCR] = { 0x1e000 },
+	[GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
+	[GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
+	[GCC_SDCC2_BCR] = { 0x14000 },
+	[GCC_SDCC4_BCR] = { 0x16000 },
+	[GCC_TSIF_BCR] = { 0x36000 },
+	[GCC_UFS_CARD_BCR] = { 0x75000 },
+	[GCC_UFS_PHY_BCR] = { 0x77000 },
+	[GCC_USB30_PRIM_BCR] = { 0xf000 },
+	[GCC_USB30_SEC_BCR] = { 0x10000 },
+	[GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 },
+	[GCC_USB3_DP_PHY_SEC_BCR] = { 0x50014 },
+	[GCC_USB3_PHY_PRIM_BCR] = { 0x50000 },
+	[GCC_USB3_PHY_SEC_BCR] = { 0x5000c },
+	[GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 },
+	[GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
+	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
+	[GCC_VIDEO_AXI0_CLK_ARES] = { 0xb024, 2 },
+	[GCC_VIDEO_AXI1_CLK_ARES] = { 0xb028, 2 },
+};
+
+static const struct clk_rcg_dfs_data gcc_dfs_clocks[] = {
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s0_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s1_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s2_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s3_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s4_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s5_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s6_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap0_s7_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s0_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s1_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s2_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s3_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s4_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap1_s5_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s0_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s1_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s2_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s3_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s4_clk_src),
+	DEFINE_RCG_DFS(gcc_qupv3_wrap2_s5_clk_src),
+};
+
+static const struct regmap_config gcc_sm8250_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x9c100,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc gcc_sm8250_desc = {
+	.config = &gcc_sm8250_regmap_config,
+	.clks = gcc_sm8250_clocks,
+	.num_clks = ARRAY_SIZE(gcc_sm8250_clocks),
+	.resets = gcc_sm8250_resets,
+	.num_resets = ARRAY_SIZE(gcc_sm8250_resets),
+	.gdscs = gcc_sm8250_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_sm8250_gdscs),
+};
+
+static const struct of_device_id gcc_sm8250_match_table[] = {
+	{ .compatible = "qcom,gcc-sm8250" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gcc_sm8250_match_table);
+
+static int gcc_sm8250_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	regmap = qcom_cc_map(pdev, &gcc_sm8250_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	/*
+	 * Disable the GPLL0 active input to NPU and GPU
+	 * via MISC registers.
+	 */
+	regmap_update_bits(regmap, 0x4d110, 0x3, 0x3);
+	regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
+
+	/*
+	 * Keep the clocks always-ON
+	 * GCC_VIDEO_AHB_CLK, GCC_CAMERA_AHB_CLK, GCC_DISP_AHB_CLK,
+	 * GCC_CPUSS_DVM_BUS_CLK, GCC_GPU_CFG_AHB_CLK,
+	 * GCC_SYS_NOC_CPUSS_AHB_CLK
+	 */
+	regmap_update_bits(regmap, 0x0b004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b008, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x0b00c, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x4818c, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x71004, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x52000, BIT(0), BIT(0));
+
+	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
+				       ARRAY_SIZE(gcc_dfs_clocks));
+	if (ret)
+		return ret;
+
+	return qcom_cc_really_probe(pdev, &gcc_sm8250_desc, regmap);
+}
+
+static struct platform_driver gcc_sm8250_driver = {
+	.probe = gcc_sm8250_probe,
+	.driver = {
+		.name = "gcc-sm8250",
+		.of_match_table = gcc_sm8250_match_table,
+	},
+};
+
+static int __init gcc_sm8250_init(void)
+{
+	return platform_driver_register(&gcc_sm8250_driver);
+}
+subsys_initcall(gcc_sm8250_init);
+
+static void __exit gcc_sm8250_exit(void)
+{
+	platform_driver_unregister(&gcc_sm8250_driver);
+}
+module_exit(gcc_sm8250_exit);
+
+MODULE_DESCRIPTION("QTI GCC SM8250 Driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From 28b2f82e0383e27476be8a5e13d2aea07ebeb275 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Wed, 19 Feb 2020 15:59:46 +0800
Subject: clk: imx: Fix division by zero warning on pfdv2

Fix below division by zero warning:

[    3.176443] Division by zero in kernel.
[    3.181809] CPU: 0 PID: 88 Comm: kworker/0:2 Not tainted 5.3.0-rc2-next-20190730-63758-ge08da51-dirty #124
[    3.191817] Hardware name: Freescale i.MX7ULP (Device Tree)
[    3.197821] Workqueue: events dbs_work_handler
[    3.202849] [<c01127d8>] (unwind_backtrace) from [<c010cd80>] (show_stack+0x10/0x14)
[    3.211058] [<c010cd80>] (show_stack) from [<c0c77e68>] (dump_stack+0xd8/0x110)
[    3.218820] [<c0c77e68>] (dump_stack) from [<c0c753c0>] (Ldiv0_64+0x8/0x18)
[    3.226263] [<c0c753c0>] (Ldiv0_64) from [<c05984b4>] (clk_pfdv2_set_rate+0x54/0xac)
[    3.234487] [<c05984b4>] (clk_pfdv2_set_rate) from [<c059192c>] (clk_change_rate+0x1a4/0x698)
[    3.243468] [<c059192c>] (clk_change_rate) from [<c0591a08>] (clk_change_rate+0x280/0x698)
[    3.252180] [<c0591a08>] (clk_change_rate) from [<c0591fc0>] (clk_core_set_rate_nolock+0x1a0/0x278)
[    3.261679] [<c0591fc0>] (clk_core_set_rate_nolock) from [<c05920c8>] (clk_set_rate+0x30/0x64)
[    3.270743] [<c05920c8>] (clk_set_rate) from [<c089cb88>] (imx7ulp_set_target+0x184/0x2a4)
[    3.279501] [<c089cb88>] (imx7ulp_set_target) from [<c0896358>] (__cpufreq_driver_target+0x188/0x514)
[    3.289196] [<c0896358>] (__cpufreq_driver_target) from [<c0899b0c>] (od_dbs_update+0x130/0x15c)
[    3.298438] [<c0899b0c>] (od_dbs_update) from [<c089a5d0>] (dbs_work_handler+0x2c/0x5c)
[    3.306914] [<c089a5d0>] (dbs_work_handler) from [<c0156858>] (process_one_work+0x2ac/0x704)
[    3.315826] [<c0156858>] (process_one_work) from [<c0156cdc>] (worker_thread+0x2c/0x574)
[    3.324404] [<c0156cdc>] (worker_thread) from [<c015cfe8>] (kthread+0x134/0x148)
[    3.332278] [<c015cfe8>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20)
[    3.339858] Exception stack(0xe82d5fb0 to 0xe82d5ff8)
[    3.345314] 5fa0:                                     00000000 00000000 00000000 00000000
[    3.353926] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.362519] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-pfdv2.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-pfdv2.c b/drivers/clk/imx/clk-pfdv2.c
index de93ce73101b..f8707278aad9 100644
--- a/drivers/clk/imx/clk-pfdv2.c
+++ b/drivers/clk/imx/clk-pfdv2.c
@@ -139,6 +139,12 @@ static int clk_pfdv2_set_rate(struct clk_hw *hw, unsigned long rate,
 	u32 val;
 	u8 frac;
 
+	if (!rate)
+		return -EINVAL;
+
+	/* PFD can NOT change rate without gating */
+	WARN_ON(clk_pfdv2_is_enabled(hw));
+
 	tmp = tmp * 18 + rate / 2;
 	do_div(tmp, rate);
 	frac = tmp;
-- 
cgit v1.2.3-59-g8ed1b


From 8ffe9c7bb9e47745b8a678629b22f57b23b8dac5 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 15:59:47 +0800
Subject: clk: imx: pfdv2: switch to use determine_rate

Per clk_ops, compared with round_rate, determine_rate could optionally
support the parent clock that should be used to provide the clock rate.

In this patch, the parent clock is just parent->rate as round_rate.

The following patch will calculate the best parent clock.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-pfdv2.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-pfdv2.c b/drivers/clk/imx/clk-pfdv2.c
index f8707278aad9..28b5f208ced9 100644
--- a/drivers/clk/imx/clk-pfdv2.c
+++ b/drivers/clk/imx/clk-pfdv2.c
@@ -98,10 +98,11 @@ static unsigned long clk_pfdv2_recalc_rate(struct clk_hw *hw,
 	return tmp;
 }
 
-static long clk_pfdv2_round_rate(struct clk_hw *hw, unsigned long rate,
-				 unsigned long *prate)
+static int clk_pfdv2_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
-	u64 tmp = *prate;
+	u64 tmp = req->best_parent_rate;
+	u64 rate = req->rate;
 	u8 frac;
 
 	tmp = tmp * 18 + rate / 2;
@@ -113,11 +114,13 @@ static long clk_pfdv2_round_rate(struct clk_hw *hw, unsigned long rate,
 	else if (frac > 35)
 		frac = 35;
 
-	tmp = *prate;
+	tmp = req->best_parent_rate;
 	tmp *= 18;
 	do_div(tmp, frac);
 
-	return tmp;
+	req->rate = tmp;
+
+	return 0;
 }
 
 static int clk_pfdv2_is_enabled(struct clk_hw *hw)
@@ -167,7 +170,7 @@ static const struct clk_ops clk_pfdv2_ops = {
 	.enable		= clk_pfdv2_enable,
 	.disable	= clk_pfdv2_disable,
 	.recalc_rate	= clk_pfdv2_recalc_rate,
-	.round_rate	= clk_pfdv2_round_rate,
+	.determine_rate	= clk_pfdv2_determine_rate,
 	.set_rate	= clk_pfdv2_set_rate,
 	.is_enabled     = clk_pfdv2_is_enabled,
 };
-- 
cgit v1.2.3-59-g8ed1b


From c88a4c797a50574c90ca11f72ab10dbded7d768e Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 15:59:48 +0800
Subject: clk: imx: pfdv2: determine best parent rate

pfdv2 is only used in i.MX7ULP. To get best pfd output, the i.MX7ULP
Datasheet defines two best PLL rate and pfd frac.

Per Datasheel
All PLLs on i.MX 7ULP either have VCO base frequency of
480 MHz or 528 MHz. So when determine best rate, we also
determine best parent rate which could match the requirement.

For some reason the current parent might not be 480MHz or 528MHz,
so we still take current parent rate as a choice.

And we also enable flag CLK_SET_RATE_PARENT to let parent rate
to be configured.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-pfdv2.c | 50 ++++++++++++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 17 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-pfdv2.c b/drivers/clk/imx/clk-pfdv2.c
index 28b5f208ced9..78e1f7641aaa 100644
--- a/drivers/clk/imx/clk-pfdv2.c
+++ b/drivers/clk/imx/clk-pfdv2.c
@@ -101,24 +101,40 @@ static unsigned long clk_pfdv2_recalc_rate(struct clk_hw *hw,
 static int clk_pfdv2_determine_rate(struct clk_hw *hw,
 				    struct clk_rate_request *req)
 {
-	u64 tmp = req->best_parent_rate;
-	u64 rate = req->rate;
+	unsigned long parent_rates[] = {
+					480000000,
+					528000000,
+					req->best_parent_rate
+				       };
+	unsigned long best_rate = -1UL, rate = req->rate;
+	unsigned long best_parent_rate = req->best_parent_rate;
+	u64 tmp;
 	u8 frac;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(parent_rates); i++) {
+		tmp = parent_rates[i];
+		tmp = tmp * 18 + rate / 2;
+		do_div(tmp, rate);
+		frac = tmp;
+
+		if (frac < 12)
+			frac = 12;
+		else if (frac > 35)
+			frac = 35;
+
+		tmp = parent_rates[i];
+		tmp *= 18;
+		do_div(tmp, frac);
+
+		if (abs(tmp - req->rate) < abs(best_rate - req->rate)) {
+			best_rate = tmp;
+			best_parent_rate = parent_rates[i];
+		}
+	}
 
-	tmp = tmp * 18 + rate / 2;
-	do_div(tmp, rate);
-	frac = tmp;
-
-	if (frac < 12)
-		frac = 12;
-	else if (frac > 35)
-		frac = 35;
-
-	tmp = req->best_parent_rate;
-	tmp *= 18;
-	do_div(tmp, frac);
-
-	req->rate = tmp;
+	req->best_parent_rate = best_parent_rate;
+	req->rate = best_rate;
 
 	return 0;
 }
@@ -198,7 +214,7 @@ struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
 	init.ops = &clk_pfdv2_ops;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
-	init.flags = CLK_SET_RATE_GATE;
+	init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT;
 
 	pfd->hw.init = &init;
 
-- 
cgit v1.2.3-59-g8ed1b


From d678d83c583dd6d00b7e3e0c5c78e8441e1a9131 Mon Sep 17 00:00:00 2001
From: Peng Fan <peng.fan@nxp.com>
Date: Wed, 19 Feb 2020 15:59:49 +0800
Subject: clk: imx: pllv4: use prepare/unprepare

It is not good to use enable/disable for PLLv4 which needs time to
lock, because enable/disable is expected to be able run in
interrupt context. So use prepare/unprepare.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-pllv4.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-pllv4.c b/drivers/clk/imx/clk-pllv4.c
index f51a800c268c..a49450431855 100644
--- a/drivers/clk/imx/clk-pllv4.c
+++ b/drivers/clk/imx/clk-pllv4.c
@@ -54,7 +54,7 @@ static inline int clk_pllv4_wait_lock(struct clk_pllv4 *pll)
 				  csr, csr & PLL_VLD, 0, LOCK_TIMEOUT_US);
 }
 
-static int clk_pllv4_is_enabled(struct clk_hw *hw)
+static int clk_pllv4_is_prepared(struct clk_hw *hw)
 {
 	struct clk_pllv4 *pll = to_clk_pllv4(hw);
 
@@ -175,7 +175,7 @@ static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-static int clk_pllv4_enable(struct clk_hw *hw)
+static int clk_pllv4_prepare(struct clk_hw *hw)
 {
 	u32 val;
 	struct clk_pllv4 *pll = to_clk_pllv4(hw);
@@ -187,7 +187,7 @@ static int clk_pllv4_enable(struct clk_hw *hw)
 	return clk_pllv4_wait_lock(pll);
 }
 
-static void clk_pllv4_disable(struct clk_hw *hw)
+static void clk_pllv4_unprepare(struct clk_hw *hw)
 {
 	u32 val;
 	struct clk_pllv4 *pll = to_clk_pllv4(hw);
@@ -201,9 +201,9 @@ static const struct clk_ops clk_pllv4_ops = {
 	.recalc_rate	= clk_pllv4_recalc_rate,
 	.round_rate	= clk_pllv4_round_rate,
 	.set_rate	= clk_pllv4_set_rate,
-	.enable		= clk_pllv4_enable,
-	.disable	= clk_pllv4_disable,
-	.is_enabled	= clk_pllv4_is_enabled,
+	.prepare	= clk_pllv4_prepare,
+	.unprepare	= clk_pllv4_unprepare,
+	.is_prepared	= clk_pllv4_is_prepared,
 };
 
 struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
-- 
cgit v1.2.3-59-g8ed1b


From e20703f00b1206b89edb1b4a7cabe36257242a9f Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 25 Feb 2020 16:49:11 +0800
Subject: clk: imx8mn: A53 core clock no need to be critical

'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure CPU's hardware clock source NOT being disabled during
clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent
operations to after critical clock 'ARM_CLK' setup finished.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mn.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 83618affca8b..0bc7070235bd 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -428,7 +428,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MN_CLK_GPU_SHADER_DIV] = hws[IMX8MN_CLK_GPU_SHADER];
 
 	/* CORE SEL */
-	hws[IMX8MN_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mn_a53_core_sels, ARRAY_SIZE(imx8mn_a53_core_sels), CLK_IS_CRITICAL);
+	hws[IMX8MN_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mn_a53_core_sels, ARRAY_SIZE(imx8mn_a53_core_sels));
 
 	/* BUS */
 	hws[IMX8MN_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mn_main_axi_sels, base + 0x8800);
@@ -559,15 +559,15 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
 
 	hws[IMX8MN_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 
-	clk_hw_set_parent(hws[IMX8MN_CLK_A53_SRC], hws[IMX8MN_SYS_PLL1_800M]);
-	clk_hw_set_parent(hws[IMX8MN_CLK_A53_CORE], hws[IMX8MN_ARM_PLL_OUT]);
-
 	hws[IMX8MN_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
 					   hws[IMX8MN_CLK_A53_CORE]->clk,
 					   hws[IMX8MN_CLK_A53_CORE]->clk,
 					   hws[IMX8MN_ARM_PLL_OUT]->clk,
 					   hws[IMX8MN_CLK_A53_DIV]->clk);
 
+	clk_hw_set_parent(hws[IMX8MN_CLK_A53_SRC], hws[IMX8MN_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MN_CLK_A53_CORE], hws[IMX8MN_ARM_PLL_OUT]);
+
 	imx_check_clk_hws(hws, IMX8MN_CLK_END);
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
-- 
cgit v1.2.3-59-g8ed1b


From 81aa844bb53bc711b943db2113d7794912f047b8 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 25 Feb 2020 16:49:12 +0800
Subject: clk: imx8mm: A53 core clock no need to be critical

'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure CPU's hardware clock source NOT being disabled during
clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent
operations to after critical clock 'ARM_CLK' setup finished.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 9feda4f5b3d6..925670438f23 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -440,7 +440,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_GPU2D_DIV] = hws[IMX8MM_CLK_GPU2D_CORE];
 
 	/* CORE SEL */
-	hws[IMX8MM_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mm_a53_core_sels, ARRAY_SIZE(imx8mm_a53_core_sels), CLK_IS_CRITICAL);
+	hws[IMX8MM_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mm_a53_core_sels, ARRAY_SIZE(imx8mm_a53_core_sels));
 
 	/* BUS */
 	hws[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi",  imx8mm_main_axi_sels, base + 0x8800);
@@ -608,15 +608,15 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MM_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 	hws[IMX8MM_CLK_DRAM_CORE] = imx_clk_hw_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mm_dram_core_sels, ARRAY_SIZE(imx8mm_dram_core_sels), CLK_IS_CRITICAL);
 
-	clk_hw_set_parent(hws[IMX8MM_CLK_A53_SRC], hws[IMX8MM_SYS_PLL1_800M]);
-	clk_hw_set_parent(hws[IMX8MM_CLK_A53_CORE], hws[IMX8MM_ARM_PLL_OUT]);
-
 	hws[IMX8MM_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
 					   hws[IMX8MM_CLK_A53_CORE]->clk,
 					   hws[IMX8MM_CLK_A53_CORE]->clk,
 					   hws[IMX8MM_ARM_PLL_OUT]->clk,
 					   hws[IMX8MM_CLK_A53_DIV]->clk);
 
+	clk_hw_set_parent(hws[IMX8MM_CLK_A53_SRC], hws[IMX8MM_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MM_CLK_A53_CORE], hws[IMX8MM_ARM_PLL_OUT]);
+
 	imx_check_clk_hws(hws, IMX8MM_CLK_END);
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
-- 
cgit v1.2.3-59-g8ed1b


From 0d77abc4fc31e038c6c5b1f08f115eb022b3c4f5 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 25 Feb 2020 16:49:13 +0800
Subject: clk: imx8mp: A53 core clock no need to be critical

'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure CPU's hardware clock source NOT being disabled during
clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent
operations to after critical clock 'ARM_CLK' setup finished.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
index c6161a4af201..c9e204edd247 100644
--- a/drivers/clk/imx/clk-imx8mp.c
+++ b/drivers/clk/imx/clk-imx8mp.c
@@ -557,7 +557,7 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_MEDIA_ISP_DIV] = imx_clk_hw_divider2("media_isp_div", "media_isp_cg", ccm_base + 0x8400, 0, 3);
 
 	/* CORE SEL */
-	hws[IMX8MP_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", ccm_base + 0x9880, 24, 1, imx8mp_a53_core_sels, ARRAY_SIZE(imx8mp_a53_core_sels), CLK_IS_CRITICAL);
+	hws[IMX8MP_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", ccm_base + 0x9880, 24, 1, imx8mp_a53_core_sels, ARRAY_SIZE(imx8mp_a53_core_sels));
 
 	hws[IMX8MP_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mp_main_axi_sels, ccm_base + 0x8800);
 	hws[IMX8MP_CLK_ENET_AXI] = imx8m_clk_hw_composite("enet_axi", imx8mp_enet_axi_sels, ccm_base + 0x8880);
@@ -729,15 +729,15 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MP_CLK_VPU_ROOT] = imx_clk_hw_gate4("vpu_root_clk", "vpu_bus", ccm_base + 0x4630, 0);
 	hws[IMX8MP_CLK_AUDIO_ROOT] = imx_clk_hw_gate4("audio_root_clk", "ipg_root", ccm_base + 0x4650, 0);
 
-	clk_hw_set_parent(hws[IMX8MP_CLK_A53_SRC], hws[IMX8MP_SYS_PLL1_800M]);
-	clk_hw_set_parent(hws[IMX8MP_CLK_A53_CORE], hws[IMX8MP_ARM_PLL_OUT]);
-
 	hws[IMX8MP_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
 					     hws[IMX8MP_CLK_A53_CORE]->clk,
 					     hws[IMX8MP_CLK_A53_CORE]->clk,
 					     hws[IMX8MP_ARM_PLL_OUT]->clk,
 					     hws[IMX8MP_CLK_A53_DIV]->clk);
 
+	clk_hw_set_parent(hws[IMX8MP_CLK_A53_SRC], hws[IMX8MP_SYS_PLL1_800M]);
+	clk_hw_set_parent(hws[IMX8MP_CLK_A53_CORE], hws[IMX8MP_ARM_PLL_OUT]);
+
 	imx_check_clk_hws(hws, IMX8MP_CLK_END);
 
 	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
-- 
cgit v1.2.3-59-g8ed1b


From b4fc6f72ddc1d4a53d3367b2d473e39d5d07a083 Mon Sep 17 00:00:00 2001
From: Anson Huang <Anson.Huang@nxp.com>
Date: Tue, 25 Feb 2020 16:49:14 +0800
Subject: clk: imx8mq: A53 core clock no need to be critical

'A53_CORE' is just a mux and no need to be critical, being critical
will cause its parent clock always ON which does NOT make sense,
to make sure CPU's hardware clock source NOT being disabled during
clock tree setup, need to move the 'A53_SRC'/'A53_CORE' reparent
operations to after critical clock 'ARM_CLK' setup finished.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx8mq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index b81f02ab7eb1..fdc68db68de5 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -428,7 +428,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_CLK_GPU_SHADER_DIV] = hws[IMX8MQ_CLK_GPU_SHADER];
 
 	/* CORE SEL */
-	hws[IMX8MQ_CLK_A53_CORE] = imx_clk_hw_mux2_flags("arm_a53_core", base + 0x9880, 24, 1, imx8mq_a53_core_sels, ARRAY_SIZE(imx8mq_a53_core_sels), CLK_IS_CRITICAL);
+	hws[IMX8MQ_CLK_A53_CORE] = imx_clk_hw_mux2("arm_a53_core", base + 0x9880, 24, 1, imx8mq_a53_core_sels, ARRAY_SIZE(imx8mq_a53_core_sels));
 
 	/* BUS */
 	hws[IMX8MQ_CLK_MAIN_AXI] = imx8m_clk_hw_composite_critical("main_axi", imx8mq_main_axi_sels, base + 0x8800);
@@ -593,15 +593,15 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
 	hws[IMX8MQ_GPT_3M_CLK] = imx_clk_hw_fixed_factor("gpt_3m", "osc_25m", 1, 8);
 	hws[IMX8MQ_CLK_DRAM_ALT_ROOT] = imx_clk_hw_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
 
-	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_SRC], hws[IMX8MQ_SYS1_PLL_800M]);
-	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_CORE], hws[IMX8MQ_ARM_PLL_OUT]);
-
 	hws[IMX8MQ_CLK_ARM] = imx_clk_hw_cpu("arm", "arm_a53_core",
 					   hws[IMX8MQ_CLK_A53_CORE]->clk,
 					   hws[IMX8MQ_CLK_A53_CORE]->clk,
 					   hws[IMX8MQ_ARM_PLL_OUT]->clk,
 					   hws[IMX8MQ_CLK_A53_DIV]->clk);
 
+	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_SRC], hws[IMX8MQ_SYS1_PLL_800M]);
+	clk_hw_set_parent(hws[IMX8MQ_CLK_A53_CORE], hws[IMX8MQ_ARM_PLL_OUT]);
+
 	imx_check_clk_hws(hws, IMX8MQ_CLK_END);
 
 	err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
-- 
cgit v1.2.3-59-g8ed1b


From 9a85eb4d62425555ccdc774d906e6bbca5ffccc0 Mon Sep 17 00:00:00 2001
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: Mon, 13 Jan 2020 23:24:07 -0800
Subject: clk: tegra: Add support for OSC_DIV fixed clocks

Tegra30 through Tegra210 has OSC_DIV2 and OSC_DIV4 fixed clocks
from the OSC pads.

This patch adds support for these clocks.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/clk-id.h          |  2 ++
 drivers/clk/tegra/clk-tegra-fixed.c | 16 ++++++++++++++++
 drivers/clk/tegra/clk-tegra114.c    |  4 ++++
 drivers/clk/tegra/clk-tegra124.c    |  4 ++++
 drivers/clk/tegra/clk-tegra210.c    |  4 ++++
 drivers/clk/tegra/clk-tegra30.c     |  4 ++++
 6 files changed, 34 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index c4faebd32760..17d8b252cd0a 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -46,6 +46,8 @@ enum clk_id {
 	tegra_clk_clk_m,
 	tegra_clk_clk_m_div2,
 	tegra_clk_clk_m_div4,
+	tegra_clk_osc_div2,
+	tegra_clk_osc_div4,
 	tegra_clk_clk_out_1,
 	tegra_clk_clk_out_1_mux,
 	tegra_clk_clk_out_2,
diff --git a/drivers/clk/tegra/clk-tegra-fixed.c b/drivers/clk/tegra/clk-tegra-fixed.c
index 7c6c8abfcde6..990106391334 100644
--- a/drivers/clk/tegra/clk-tegra-fixed.c
+++ b/drivers/clk/tegra/clk-tegra-fixed.c
@@ -48,6 +48,22 @@ int __init tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *clks,
 
 	osc = clk_register_fixed_rate(NULL, "osc", NULL, 0, *osc_freq);
 
+	/* osc_div2 */
+	dt_clk = tegra_lookup_dt_id(tegra_clk_osc_div2, clks);
+	if (dt_clk) {
+		clk = clk_register_fixed_factor(NULL, "osc_div2", "osc",
+						0, 1, 2);
+		*dt_clk = clk;
+	}
+
+	/* osc_div4 */
+	dt_clk = tegra_lookup_dt_id(tegra_clk_osc_div4, clks);
+	if (dt_clk) {
+		clk = clk_register_fixed_factor(NULL, "osc_div4", "osc",
+						0, 1, 4);
+		*dt_clk = clk;
+	}
+
 	dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m, clks);
 	if (!dt_clk)
 		return 0;
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index 4efcaaf51b3a..d44cb8db0ef6 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -737,6 +737,8 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA114_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA114_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA114_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA114_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA114_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA114_CLK_PLL_REF, .present = true },
 	[tegra_clk_pll_c] = { .dt_id = TEGRA114_CLK_PLL_C, .present = true },
 	[tegra_clk_pll_c_out1] = { .dt_id = TEGRA114_CLK_PLL_C_OUT1, .present = true },
@@ -817,6 +819,8 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA114_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA114_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA114_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc_div2", .dt_id = TEGRA114_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA114_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA114_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA114_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_c2", .dt_id = TEGRA114_CLK_PLL_C2 },
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index b3110d5b5a6c..32f3dd1ccbad 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -862,6 +862,8 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA124_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA124_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA124_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA124_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA124_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA124_CLK_PLL_REF, .present = true },
 	[tegra_clk_pll_c] = { .dt_id = TEGRA124_CLK_PLL_C, .present = true },
 	[tegra_clk_pll_c_out1] = { .dt_id = TEGRA124_CLK_PLL_C_OUT1, .present = true },
@@ -943,6 +945,8 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA124_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA124_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA124_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc_div2", .dt_id = TEGRA124_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA124_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA124_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA124_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_c2", .dt_id = TEGRA124_CLK_PLL_C2 },
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 762cd186f714..899d8ca68c4f 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2373,6 +2373,8 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA210_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA210_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA210_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA210_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA210_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA210_CLK_PLL_REF, .present = true },
 	[tegra_clk_pll_c] = { .dt_id = TEGRA210_CLK_PLL_C, .present = true },
 	[tegra_clk_pll_c_out1] = { .dt_id = TEGRA210_CLK_PLL_C_OUT1, .present = true },
@@ -2499,6 +2501,8 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA210_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA210_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA210_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc_div2", .dt_id = TEGRA210_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA210_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA210_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA210_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_c2", .dt_id = TEGRA210_CLK_PLL_C2 },
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index b20891489e11..7e62d9ae377c 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -583,6 +583,8 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA30_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA30_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA30_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc_div2", .dt_id = TEGRA30_CLK_OSC_DIV2 },
+	{ .con_id = "osc_div4", .dt_id = TEGRA30_CLK_OSC_DIV4 },
 	{ .con_id = "cml0", .dt_id = TEGRA30_CLK_CML0 },
 	{ .con_id = "cml1", .dt_id = TEGRA30_CLK_CML1 },
 	{ .con_id = "clk_m", .dt_id = TEGRA30_CLK_CLK_M },
@@ -685,6 +687,8 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA30_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA30_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA30_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc_div2] = { .dt_id = TEGRA30_CLK_OSC_DIV2, .present = true },
+	[tegra_clk_osc_div4] = { .dt_id = TEGRA30_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA30_CLK_PLL_REF, .present = true },
 	[tegra_clk_spdif_in_sync] = { .dt_id = TEGRA30_CLK_SPDIF_IN_SYNC, .present = true },
 	[tegra_clk_i2s0_sync] = { .dt_id = TEGRA30_CLK_I2S0_SYNC, .present = true },
-- 
cgit v1.2.3-59-g8ed1b


From 2b50e49b093c6f4c03faaf06d6b67707fab40938 Mon Sep 17 00:00:00 2001
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: Mon, 13 Jan 2020 23:24:08 -0800
Subject: clk: tegra: Add Tegra OSC to clock lookup

OSC is one of the parent for Tegra PMC clocks clk_out_1, clk_out_2,
and clk_out_3.

This patch adds Tegra OSC to clock lookup.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/clk-id.h          | 1 +
 drivers/clk/tegra/clk-tegra-fixed.c | 5 +++++
 drivers/clk/tegra/clk-tegra114.c    | 2 ++
 drivers/clk/tegra/clk-tegra124.c    | 2 ++
 drivers/clk/tegra/clk-tegra210.c    | 2 ++
 drivers/clk/tegra/clk-tegra30.c     | 2 ++
 6 files changed, 14 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index 17d8b252cd0a..17c13d1aa6bc 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -46,6 +46,7 @@ enum clk_id {
 	tegra_clk_clk_m,
 	tegra_clk_clk_m_div2,
 	tegra_clk_clk_m_div4,
+	tegra_clk_osc,
 	tegra_clk_osc_div2,
 	tegra_clk_osc_div4,
 	tegra_clk_clk_out_1,
diff --git a/drivers/clk/tegra/clk-tegra-fixed.c b/drivers/clk/tegra/clk-tegra-fixed.c
index 990106391334..0dc2d5f5cfb5 100644
--- a/drivers/clk/tegra/clk-tegra-fixed.c
+++ b/drivers/clk/tegra/clk-tegra-fixed.c
@@ -46,7 +46,12 @@ int __init tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *clks,
 		return -EINVAL;
 	}
 
+	dt_clk = tegra_lookup_dt_id(tegra_clk_osc, clks);
+	if (!dt_clk)
+		return 0;
+
 	osc = clk_register_fixed_rate(NULL, "osc", NULL, 0, *osc_freq);
+	*dt_clk = osc;
 
 	/* osc_div2 */
 	dt_clk = tegra_lookup_dt_id(tegra_clk_osc_div2, clks);
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index d44cb8db0ef6..e3c68eca54b7 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -737,6 +737,7 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA114_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA114_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA114_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA114_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA114_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA114_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA114_CLK_PLL_REF, .present = true },
@@ -819,6 +820,7 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA114_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA114_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA114_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA114_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA114_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA114_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA114_CLK_PLL_C },
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 32f3dd1ccbad..ef0f928f0259 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -862,6 +862,7 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA124_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA124_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA124_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA124_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA124_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA124_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA124_CLK_PLL_REF, .present = true },
@@ -945,6 +946,7 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA124_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA124_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA124_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA124_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA124_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA124_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA124_CLK_PLL_C },
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 899d8ca68c4f..958f5f6c894d 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2373,6 +2373,7 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA210_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA210_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA210_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA210_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA210_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA210_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA210_CLK_PLL_REF, .present = true },
@@ -2501,6 +2502,7 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA210_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA210_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA210_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA210_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA210_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA210_CLK_OSC_DIV4 },
 	{ .con_id = "pll_c", .dt_id = TEGRA210_CLK_PLL_C },
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 7e62d9ae377c..0ba9958724a6 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -583,6 +583,7 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_32k", .dt_id = TEGRA30_CLK_CLK_32K },
 	{ .con_id = "clk_m_div2", .dt_id = TEGRA30_CLK_CLK_M_DIV2 },
 	{ .con_id = "clk_m_div4", .dt_id = TEGRA30_CLK_CLK_M_DIV4 },
+	{ .con_id = "osc", .dt_id = TEGRA30_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA30_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA30_CLK_OSC_DIV4 },
 	{ .con_id = "cml0", .dt_id = TEGRA30_CLK_CML0 },
@@ -687,6 +688,7 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_m] = { .dt_id = TEGRA30_CLK_CLK_M, .present = true },
 	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA30_CLK_CLK_M_DIV2, .present = true },
 	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA30_CLK_CLK_M_DIV4, .present = true },
+	[tegra_clk_osc] = { .dt_id = TEGRA30_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA30_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA30_CLK_OSC_DIV4, .present = true },
 	[tegra_clk_pll_ref] = { .dt_id = TEGRA30_CLK_PLL_REF, .present = true },
-- 
cgit v1.2.3-59-g8ed1b


From 6fe38aa8cac3a5db38154331742835a4d9740788 Mon Sep 17 00:00:00 2001
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: Mon, 13 Jan 2020 23:24:09 -0800
Subject: clk: tegra: Fix Tegra PMC clock out parents

Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents
are osc, osc_div2, osc_div4 and extern clock.

Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4
for PMC clocks.

This patch fixes this.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/clk-tegra-pmc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c
index bec3e008335f..5e044ba1ae36 100644
--- a/drivers/clk/tegra/clk-tegra-pmc.c
+++ b/drivers/clk/tegra/clk-tegra-pmc.c
@@ -49,16 +49,16 @@ struct pmc_clk_init_data {
 
 static DEFINE_SPINLOCK(clk_out_lock);
 
-static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern1",
+static const char *clk_out1_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern1",
 };
 
-static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern2",
+static const char *clk_out2_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern2",
 };
 
-static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
-	"clk_m_div4", "extern3",
+static const char *clk_out3_parents[] = { "osc", "osc_div2",
+	"osc_div4", "extern3",
 };
 
 static struct pmc_clk_init_data pmc_clks[] = {
-- 
cgit v1.2.3-59-g8ed1b


From c9e28c25a0d05ff658a1abcf54b13311a3bfb960 Mon Sep 17 00:00:00 2001
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: Mon, 13 Jan 2020 23:24:10 -0800
Subject: clk: tegra: Remove CLK_M_DIV fixed clocks

Tegra has no CLK_M_DIV2 and CLK_M_DIV4 clocks and instead it has
OSC_DIV2 and OSC_DIV4 clocks from OSC pads which are the possible
parents of PMC clocks for Tegra30 through Tegra210.

Tegra PMC clock parents are changed to use OSC_DIV clocks.

So, this patch removes CLK_M_DIV fixed clocks

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/clk-id.h          |  2 --
 drivers/clk/tegra/clk-tegra-fixed.c | 16 ----------------
 drivers/clk/tegra/clk-tegra114.c    | 15 ---------------
 drivers/clk/tegra/clk-tegra124.c    |  4 ----
 drivers/clk/tegra/clk-tegra210.c    |  4 ----
 drivers/clk/tegra/clk-tegra30.c     |  4 ----
 6 files changed, 45 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index 17c13d1aa6bc..cf42e5995794 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -44,8 +44,6 @@ enum clk_id {
 	tegra_clk_clk72Mhz,
 	tegra_clk_clk72Mhz_8,
 	tegra_clk_clk_m,
-	tegra_clk_clk_m_div2,
-	tegra_clk_clk_m_div4,
 	tegra_clk_osc,
 	tegra_clk_osc_div2,
 	tegra_clk_osc_div4,
diff --git a/drivers/clk/tegra/clk-tegra-fixed.c b/drivers/clk/tegra/clk-tegra-fixed.c
index 0dc2d5f5cfb5..77c22cef5014 100644
--- a/drivers/clk/tegra/clk-tegra-fixed.c
+++ b/drivers/clk/tegra/clk-tegra-fixed.c
@@ -105,22 +105,6 @@ void __init tegra_fixed_clk_init(struct tegra_clk *tegra_clks)
 		clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, 0, 32768);
 		*dt_clk = clk;
 	}
-
-	/* clk_m_div2 */
-	dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div2, tegra_clks);
-	if (dt_clk) {
-		clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 2);
-		*dt_clk = clk;
-	}
-
-	/* clk_m_div4 */
-	dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div4, tegra_clks);
-	if (dt_clk) {
-		clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 4);
-		*dt_clk = clk;
-	}
 }
 
 void tegra_clk_osc_resume(void __iomem *clk_base)
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index e3c68eca54b7..180ddc2abfd2 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -735,8 +735,6 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_fuse_burn] = { .dt_id = TEGRA114_CLK_FUSE_BURN, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA114_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA114_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA114_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA114_CLK_CLK_M_DIV4, .present = true },
 	[tegra_clk_osc] = { .dt_id = TEGRA114_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA114_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA114_CLK_OSC_DIV4, .present = true },
@@ -818,8 +816,6 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_m", .dt_id = TEGRA114_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA114_CLK_PLL_REF },
 	{ .con_id = "clk_32k", .dt_id = TEGRA114_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA114_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA114_CLK_CLK_M_DIV4 },
 	{ .con_id = "osc", .dt_id = TEGRA114_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA114_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA114_CLK_OSC_DIV4 },
@@ -906,17 +902,6 @@ static void __init tegra114_fixed_clk_init(void __iomem *clk_base)
 	/* clk_32k */
 	clk = clk_register_fixed_rate(NULL, "clk_32k", NULL, 0, 32768);
 	clks[TEGRA114_CLK_CLK_32K] = clk;
-
-	/* clk_m_div2 */
-	clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 2);
-	clks[TEGRA114_CLK_CLK_M_DIV2] = clk;
-
-	/* clk_m_div4 */
-	clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
-					CLK_SET_RATE_PARENT, 1, 4);
-	clks[TEGRA114_CLK_CLK_M_DIV4] = clk;
-
 }
 
 static void __init tegra114_pll_init(void __iomem *clk_base,
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index ef0f928f0259..7a16e50eb20f 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -860,8 +860,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_fuse_burn] = { .dt_id = TEGRA124_CLK_FUSE_BURN, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA124_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA124_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA124_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA124_CLK_CLK_M_DIV4, .present = true },
 	[tegra_clk_osc] = { .dt_id = TEGRA124_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA124_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA124_CLK_OSC_DIV4, .present = true },
@@ -944,8 +942,6 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_m", .dt_id = TEGRA124_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA124_CLK_PLL_REF },
 	{ .con_id = "clk_32k", .dt_id = TEGRA124_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA124_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA124_CLK_CLK_M_DIV4 },
 	{ .con_id = "osc", .dt_id = TEGRA124_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA124_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA124_CLK_OSC_DIV4 },
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 958f5f6c894d..45d54ead30bc 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2371,8 +2371,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_fuse_burn] = { .dt_id = TEGRA210_CLK_FUSE_BURN, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA210_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA210_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA210_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA210_CLK_CLK_M_DIV4, .present = true },
 	[tegra_clk_osc] = { .dt_id = TEGRA210_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA210_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA210_CLK_OSC_DIV4, .present = true },
@@ -2500,8 +2498,6 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "clk_m", .dt_id = TEGRA210_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA210_CLK_PLL_REF },
 	{ .con_id = "clk_32k", .dt_id = TEGRA210_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA210_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA210_CLK_CLK_M_DIV4 },
 	{ .con_id = "osc", .dt_id = TEGRA210_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA210_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA210_CLK_OSC_DIV4 },
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 0ba9958724a6..c54fe3d4fe99 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -581,8 +581,6 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "twd", .dt_id = TEGRA30_CLK_TWD },
 	{ .con_id = "emc", .dt_id = TEGRA30_CLK_EMC },
 	{ .con_id = "clk_32k", .dt_id = TEGRA30_CLK_CLK_32K },
-	{ .con_id = "clk_m_div2", .dt_id = TEGRA30_CLK_CLK_M_DIV2 },
-	{ .con_id = "clk_m_div4", .dt_id = TEGRA30_CLK_CLK_M_DIV4 },
 	{ .con_id = "osc", .dt_id = TEGRA30_CLK_OSC },
 	{ .con_id = "osc_div2", .dt_id = TEGRA30_CLK_OSC_DIV2 },
 	{ .con_id = "osc_div4", .dt_id = TEGRA30_CLK_OSC_DIV4 },
@@ -686,8 +684,6 @@ static struct tegra_devclk devclks[] __initdata = {
 static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA30_CLK_CLK_32K, .present = true },
 	[tegra_clk_clk_m] = { .dt_id = TEGRA30_CLK_CLK_M, .present = true },
-	[tegra_clk_clk_m_div2] = { .dt_id = TEGRA30_CLK_CLK_M_DIV2, .present = true },
-	[tegra_clk_clk_m_div4] = { .dt_id = TEGRA30_CLK_CLK_M_DIV4, .present = true },
 	[tegra_clk_osc] = { .dt_id = TEGRA30_CLK_OSC, .present = true },
 	[tegra_clk_osc_div2] = { .dt_id = TEGRA30_CLK_OSC_DIV2, .present = true },
 	[tegra_clk_osc_div4] = { .dt_id = TEGRA30_CLK_OSC_DIV4, .present = true },
-- 
cgit v1.2.3-59-g8ed1b


From acbeec3d376cb17b627a674dae049934d15c57e6 Mon Sep 17 00:00:00 2001
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: Mon, 13 Jan 2020 23:24:25 -0800
Subject: clk: tegra: Remove tegra_pmc_clk_init along with clk ids

Current Tegra clock driver registers PMC clocks clk_out_1, clk_out_2,
clk_out_3 and 32KHz blink output in tegra_pmc_init() which does direct
PMC register access during clk_ops and these PMC register read and write
access will not happen when PMC is in secure mode.

Any direct PMC register access from non-secure world will not go
through.

All the PMC clocks are moved to Tegra PMC driver with PMC as a clock
provider.

This patch removes tegra_pmc_clk_init along with corresponding clk ids
from Tegra clock driver.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/Makefile        |   1 -
 drivers/clk/tegra/clk-id.h        |   7 ---
 drivers/clk/tegra/clk-tegra-pmc.c | 122 --------------------------------------
 drivers/clk/tegra/clk-tegra114.c  |  17 +-----
 drivers/clk/tegra/clk-tegra124.c  |  33 ++++-------
 drivers/clk/tegra/clk-tegra20.c   |   4 --
 drivers/clk/tegra/clk-tegra210.c  |  17 +-----
 drivers/clk/tegra/clk-tegra30.c   |  18 +-----
 drivers/clk/tegra/clk.h           |   1 -
 9 files changed, 19 insertions(+), 201 deletions(-)
 delete mode 100644 drivers/clk/tegra/clk-tegra-pmc.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
index df966ca06788..1f7c30f87ece 100644
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
@@ -12,7 +12,6 @@ obj-y					+= clk-sdmmc-mux.o
 obj-y					+= clk-super.o
 obj-y					+= clk-tegra-audio.o
 obj-y					+= clk-tegra-periph.o
-obj-y					+= clk-tegra-pmc.o
 obj-y					+= clk-tegra-fixed.o
 obj-y					+= clk-tegra-super-gen4.o
 obj-$(CONFIG_TEGRA_CLK_EMC)		+= clk-emc.o
diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index cf42e5995794..ff7da2d3e94d 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -32,7 +32,6 @@ enum clk_id {
 	tegra_clk_audio4,
 	tegra_clk_audio4_2x,
 	tegra_clk_audio4_mux,
-	tegra_clk_blink,
 	tegra_clk_bsea,
 	tegra_clk_bsev,
 	tegra_clk_cclk_g,
@@ -47,12 +46,6 @@ enum clk_id {
 	tegra_clk_osc,
 	tegra_clk_osc_div2,
 	tegra_clk_osc_div4,
-	tegra_clk_clk_out_1,
-	tegra_clk_clk_out_1_mux,
-	tegra_clk_clk_out_2,
-	tegra_clk_clk_out_2_mux,
-	tegra_clk_clk_out_3,
-	tegra_clk_clk_out_3_mux,
 	tegra_clk_cml0,
 	tegra_clk_cml1,
 	tegra_clk_csi,
diff --git a/drivers/clk/tegra/clk-tegra-pmc.c b/drivers/clk/tegra/clk-tegra-pmc.c
deleted file mode 100644
index 5e044ba1ae36..000000000000
--- a/drivers/clk/tegra/clk-tegra-pmc.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2012, 2013, NVIDIA CORPORATION.  All rights reserved.
- */
-
-#include <linux/io.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/clk/tegra.h>
-
-#include "clk.h"
-#include "clk-id.h"
-
-#define PMC_CLK_OUT_CNTRL 0x1a8
-#define PMC_DPD_PADS_ORIDE 0x1c
-#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
-#define PMC_CTRL 0
-#define PMC_CTRL_BLINK_ENB 7
-#define PMC_BLINK_TIMER 0x40
-
-struct pmc_clk_init_data {
-	char *mux_name;
-	char *gate_name;
-	const char **parents;
-	int num_parents;
-	int mux_id;
-	int gate_id;
-	char *dev_name;
-	u8 mux_shift;
-	u8 gate_shift;
-};
-
-#define PMC_CLK(_num, _mux_shift, _gate_shift)\
-	{\
-		.mux_name = "clk_out_" #_num "_mux",\
-		.gate_name = "clk_out_" #_num,\
-		.parents = clk_out ##_num ##_parents,\
-		.num_parents = ARRAY_SIZE(clk_out ##_num ##_parents),\
-		.mux_id = tegra_clk_clk_out_ ##_num ##_mux,\
-		.gate_id = tegra_clk_clk_out_ ##_num,\
-		.dev_name = "extern" #_num,\
-		.mux_shift = _mux_shift,\
-		.gate_shift = _gate_shift,\
-	}
-
-static DEFINE_SPINLOCK(clk_out_lock);
-
-static const char *clk_out1_parents[] = { "osc", "osc_div2",
-	"osc_div4", "extern1",
-};
-
-static const char *clk_out2_parents[] = { "osc", "osc_div2",
-	"osc_div4", "extern2",
-};
-
-static const char *clk_out3_parents[] = { "osc", "osc_div2",
-	"osc_div4", "extern3",
-};
-
-static struct pmc_clk_init_data pmc_clks[] = {
-	PMC_CLK(1, 6, 2),
-	PMC_CLK(2, 14, 10),
-	PMC_CLK(3, 22, 18),
-};
-
-void __init tegra_pmc_clk_init(void __iomem *pmc_base,
-				struct tegra_clk *tegra_clks)
-{
-	struct clk *clk;
-	struct clk **dt_clk;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pmc_clks); i++) {
-		struct pmc_clk_init_data *data;
-
-		data = pmc_clks + i;
-
-		dt_clk = tegra_lookup_dt_id(data->mux_id, tegra_clks);
-		if (!dt_clk)
-			continue;
-
-		clk = clk_register_mux(NULL, data->mux_name, data->parents,
-				data->num_parents,
-				CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
-				pmc_base + PMC_CLK_OUT_CNTRL, data->mux_shift,
-				3, 0, &clk_out_lock);
-		*dt_clk = clk;
-
-
-		dt_clk = tegra_lookup_dt_id(data->gate_id, tegra_clks);
-		if (!dt_clk)
-			continue;
-
-		clk = clk_register_gate(NULL, data->gate_name, data->mux_name,
-					CLK_SET_RATE_PARENT,
-					pmc_base + PMC_CLK_OUT_CNTRL,
-					data->gate_shift, 0, &clk_out_lock);
-		*dt_clk = clk;
-		clk_register_clkdev(clk, data->dev_name, data->gate_name);
-	}
-
-	/* blink */
-	writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
-	clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
-				pmc_base + PMC_DPD_PADS_ORIDE,
-				PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
-
-	dt_clk = tegra_lookup_dt_id(tegra_clk_blink, tegra_clks);
-	if (!dt_clk)
-		return;
-
-	clk = clk_register_gate(NULL, "blink", "blink_override", 0,
-				pmc_base + PMC_CTRL,
-				PMC_CTRL_BLINK_ENB, 0, NULL);
-	clk_register_clkdev(clk, "blink", NULL);
-	*dt_clk = clk;
-}
-
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index 180ddc2abfd2..c138ef75480b 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -779,10 +779,6 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3] = { .dt_id = TEGRA114_CLK_AUDIO3, .present = true },
 	[tegra_clk_audio4] = { .dt_id = TEGRA114_CLK_AUDIO4, .present = true },
 	[tegra_clk_spdif] = { .dt_id = TEGRA114_CLK_SPDIF, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA114_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA114_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA114_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA114_CLK_BLINK, .present = true },
 	[tegra_clk_xusb_host_src] = { .dt_id = TEGRA114_CLK_XUSB_HOST_SRC, .present = true },
 	[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true },
 	[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true },
@@ -804,9 +800,6 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_mux] = { .dt_id = TEGRA114_CLK_AUDIO3_MUX, .present = true },
 	[tegra_clk_audio4_mux] = { .dt_id = TEGRA114_CLK_AUDIO4_MUX, .present = true },
 	[tegra_clk_spdif_mux] = { .dt_id = TEGRA114_CLK_SPDIF_MUX, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA114_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_dsia_mux] = { .dt_id = TEGRA114_CLK_DSIA_MUX, .present = true },
 	[tegra_clk_dsib_mux] = { .dt_id = TEGRA114_CLK_DSIB_MUX, .present = true },
 	[tegra_clk_cec] = { .dt_id = TEGRA114_CLK_CEC, .present = true },
@@ -865,10 +858,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio3_2x", .dt_id = TEGRA114_CLK_AUDIO3_2X },
 	{ .con_id = "audio4_2x", .dt_id = TEGRA114_CLK_AUDIO4_2X },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA114_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA114_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA114_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA114_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA114_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA114_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA114_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA114_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA114_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA114_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA114_CLK_SCLK },
@@ -1147,8 +1139,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 1 },
 	{ TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 1 },
 	{ TEGRA114_CLK_EXTERN1, TEGRA114_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA114_CLK_CLK_OUT_1_MUX, TEGRA114_CLK_EXTERN1, 0, 1 },
-	{ TEGRA114_CLK_CLK_OUT_1, TEGRA114_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA114_CLK_I2S0, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA114_CLK_I2S1, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA114_CLK_I2S2, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -1350,7 +1340,6 @@ static void __init tegra114_clock_init(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra114_clks,
 			     tegra114_audio_plls,
 			     ARRAY_SIZE(tegra114_audio_plls), 24000000);
-	tegra_pmc_clk_init(pmc_base, tegra114_clks);
 	tegra_super_clk_gen4_init(clk_base, pmc_base, tegra114_clks,
 					&pll_x_params);
 
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 7a16e50eb20f..54cac77deaa3 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -903,10 +903,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3] = { .dt_id = TEGRA124_CLK_AUDIO3, .present = true },
 	[tegra_clk_audio4] = { .dt_id = TEGRA124_CLK_AUDIO4, .present = true },
 	[tegra_clk_spdif] = { .dt_id = TEGRA124_CLK_SPDIF, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA124_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA124_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA124_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA124_CLK_BLINK, .present = true },
 	[tegra_clk_xusb_host_src] = { .dt_id = TEGRA124_CLK_XUSB_HOST_SRC, .present = true },
 	[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true },
 	[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true },
@@ -932,9 +928,6 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_mux] = { .dt_id = TEGRA124_CLK_AUDIO3_MUX, .present = true },
 	[tegra_clk_audio4_mux] = { .dt_id = TEGRA124_CLK_AUDIO4_MUX, .present = true },
 	[tegra_clk_spdif_mux] = { .dt_id = TEGRA124_CLK_SPDIF_MUX, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA124_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_cec] = { .dt_id = TEGRA124_CLK_CEC, .present = true },
 };
 
@@ -990,10 +983,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio3_2x", .dt_id = TEGRA124_CLK_AUDIO3_2X },
 	{ .con_id = "audio4_2x", .dt_id = TEGRA124_CLK_AUDIO4_2X },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA124_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA124_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA124_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA124_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA124_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA124_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA124_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA124_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA124_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA124_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA124_CLK_SCLK },
@@ -1303,8 +1295,6 @@ static struct tegra_clk_init_table common_init_table[] __initdata = {
 	{ TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 1 },
 	{ TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 1 },
 	{ TEGRA124_CLK_EXTERN1, TEGRA124_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA124_CLK_CLK_OUT_1_MUX, TEGRA124_CLK_EXTERN1, 0, 1 },
-	{ TEGRA124_CLK_CLK_OUT_1, TEGRA124_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA124_CLK_I2S0, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA124_CLK_I2S1, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA124_CLK_I2S2, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -1459,11 +1449,9 @@ static void __init tegra132_clock_apply_init_table(void)
  * tegra124_132_clock_init_pre - clock initialization preamble for T124/T132
  * @np: struct device_node * of the DT node for the SoC CAR IP block
  *
- * Register most of the clocks controlled by the CAR IP block, along
- * with a few clocks controlled by the PMC IP block.  Everything in
- * this function should be common to Tegra124 and Tegra132.  XXX The
- * PMC clock initialization should probably be moved to PMC-specific
- * driver code.  No return value.
+ * Register most of the clocks controlled by the CAR IP block.
+ * Everything in this function should be common to Tegra124 and Tegra132.
+ * No return value.
  */
 static void __init tegra124_132_clock_init_pre(struct device_node *np)
 {
@@ -1506,7 +1494,6 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra124_clks,
 			     tegra124_audio_plls,
 			     ARRAY_SIZE(tegra124_audio_plls), 24576000);
-	tegra_pmc_clk_init(pmc_base, tegra124_clks);
 
 	/* For Tegra124 & Tegra132, PLLD is the only source for DSIA & DSIB */
 	plld_base = readl(clk_base + PLLD_BASE);
@@ -1518,11 +1505,11 @@ static void __init tegra124_132_clock_init_pre(struct device_node *np)
  * tegra124_132_clock_init_post - clock initialization postamble for T124/T132
  * @np: struct device_node * of the DT node for the SoC CAR IP block
  *
- * Register most of the along with a few clocks controlled by the PMC
- * IP block.  Everything in this function should be common to Tegra124
+ * Register most of the clocks controlled by the CAR IP block.
+ * Everything in this function should be common to Tegra124
  * and Tegra132.  This function must be called after
- * tegra124_132_clock_init_pre(), otherwise clk_base and pmc_base will
- * not be set.  No return value.
+ * tegra124_132_clock_init_pre(), otherwise clk_base will not be set.
+ * No return value.
  */
 static void __init tegra124_132_clock_init_post(struct device_node *np)
 {
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index fff5cba87637..6882d777a7d3 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -458,7 +458,6 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "cdev1", .dt_id = TEGRA20_CLK_CDEV1 },
 	{ .con_id = "cdev2", .dt_id = TEGRA20_CLK_CDEV2 },
 	{ .con_id = "clk_32k", .dt_id = TEGRA20_CLK_CLK_32K },
-	{ .con_id = "blink", .dt_id = TEGRA20_CLK_BLINK },
 	{ .con_id = "clk_m", .dt_id = TEGRA20_CLK_CLK_M },
 	{ .con_id = "pll_ref", .dt_id = TEGRA20_CLK_PLL_REF },
 	{ .dev_id = "tegra20-i2s.0", .dt_id = TEGRA20_CLK_I2S1 },
@@ -537,7 +536,6 @@ static struct tegra_clk tegra20_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_csi] = { .dt_id = TEGRA20_CLK_CSI, .present = true },
 	[tegra_clk_isp] = { .dt_id = TEGRA20_CLK_ISP, .present = true },
 	[tegra_clk_clk_32k] = { .dt_id = TEGRA20_CLK_CLK_32K, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA20_CLK_BLINK, .present = true },
 	[tegra_clk_hclk] = { .dt_id = TEGRA20_CLK_HCLK, .present = true },
 	[tegra_clk_pclk] = { .dt_id = TEGRA20_CLK_PCLK, .present = true },
 	[tegra_clk_pll_p_out1] = { .dt_id = TEGRA20_CLK_PLL_P_OUT1, .present = true },
@@ -1034,7 +1032,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 1 },
 	{ TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 1 },
 	{ TEGRA20_CLK_CDEV1, TEGRA20_CLK_CLK_MAX, 0, 1 },
-	{ TEGRA20_CLK_BLINK, TEGRA20_CLK_CLK_MAX, 32768, 1 },
 	{ TEGRA20_CLK_I2S1, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA20_CLK_I2S2, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA20_CLK_SDMMC1, TEGRA20_CLK_PLL_P, 48000000, 0 },
@@ -1146,7 +1143,6 @@ static void __init tegra20_clock_init(struct device_node *np)
 	tegra_super_clk_gen4_init(clk_base, pmc_base, tegra20_clks, NULL);
 	tegra20_periph_clk_init();
 	tegra20_audio_clk_init();
-	tegra_pmc_clk_init(pmc_base, tegra20_clks);
 
 	tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX);
 
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 45d54ead30bc..d2f1e9c0ed25 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2418,10 +2418,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3] = { .dt_id = TEGRA210_CLK_AUDIO3, .present = true },
 	[tegra_clk_audio4] = { .dt_id = TEGRA210_CLK_AUDIO4, .present = true },
 	[tegra_clk_spdif] = { .dt_id = TEGRA210_CLK_SPDIF, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA210_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA210_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA210_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA210_CLK_BLINK, .present = true },
 	[tegra_clk_xusb_gate] = { .dt_id = TEGRA210_CLK_XUSB_GATE, .present = true },
 	[tegra_clk_xusb_host_src_8] = { .dt_id = TEGRA210_CLK_XUSB_HOST_SRC, .present = true },
 	[tegra_clk_xusb_falcon_src_8] = { .dt_id = TEGRA210_CLK_XUSB_FALCON_SRC, .present = true },
@@ -2453,9 +2449,6 @@ static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_mux] = { .dt_id = TEGRA210_CLK_AUDIO3_MUX, .present = true },
 	[tegra_clk_audio4_mux] = { .dt_id = TEGRA210_CLK_AUDIO4_MUX, .present = true },
 	[tegra_clk_spdif_mux] = { .dt_id = TEGRA210_CLK_SPDIF_MUX, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_maud] = { .dt_id = TEGRA210_CLK_MAUD, .present = true },
 	[tegra_clk_mipibif] = { .dt_id = TEGRA210_CLK_MIPIBIF, .present = true },
 	[tegra_clk_qspi] = { .dt_id = TEGRA210_CLK_QSPI, .present = true },
@@ -2542,10 +2535,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio4", .dt_id = TEGRA210_CLK_AUDIO4 },
 	{ .con_id = "spdif", .dt_id = TEGRA210_CLK_SPDIF },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA210_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA210_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA210_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA210_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA210_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA210_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA210_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA210_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA210_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA210_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA210_CLK_SCLK },
@@ -3453,8 +3445,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 1 },
 	{ TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 1 },
 	{ TEGRA210_CLK_EXTERN1, TEGRA210_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA210_CLK_CLK_OUT_1_MUX, TEGRA210_CLK_EXTERN1, 0, 1 },
-	{ TEGRA210_CLK_CLK_OUT_1, TEGRA210_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA210_CLK_I2S0, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA210_CLK_I2S1, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA210_CLK_I2S2, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -3695,7 +3685,6 @@ static void __init tegra210_clock_init(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra210_clks,
 			     tegra210_audio_plls,
 			     ARRAY_SIZE(tegra210_audio_plls), 24576000);
-	tegra_pmc_clk_init(pmc_base, tegra210_clks);
 
 	/* For Tegra210, PLLD is the only source for DSIA & DSIB */
 	value = readl(clk_base + PLLD_BASE);
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index c54fe3d4fe99..5a12f55ef13b 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -569,10 +569,9 @@ static struct tegra_devclk devclks[] __initdata = {
 	{ .con_id = "audio3_2x", .dt_id = TEGRA30_CLK_AUDIO3_2X },
 	{ .con_id = "audio4_2x", .dt_id = TEGRA30_CLK_AUDIO4_2X },
 	{ .con_id = "spdif_2x", .dt_id = TEGRA30_CLK_SPDIF_2X },
-	{ .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA30_CLK_EXTERN1 },
-	{ .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA30_CLK_EXTERN2 },
-	{ .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA30_CLK_EXTERN3 },
-	{ .con_id = "blink", .dt_id = TEGRA30_CLK_BLINK },
+	{ .con_id = "extern1", .dt_id = TEGRA30_CLK_EXTERN1 },
+	{ .con_id = "extern2", .dt_id = TEGRA30_CLK_EXTERN2 },
+	{ .con_id = "extern3", .dt_id = TEGRA30_CLK_EXTERN3 },
 	{ .con_id = "cclk_g", .dt_id = TEGRA30_CLK_CCLK_G },
 	{ .con_id = "cclk_lp", .dt_id = TEGRA30_CLK_CCLK_LP },
 	{ .con_id = "sclk", .dt_id = TEGRA30_CLK_SCLK },
@@ -713,13 +712,6 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_audio3_2x] = { .dt_id = TEGRA30_CLK_AUDIO3_2X, .present = true },
 	[tegra_clk_audio4_2x] = { .dt_id = TEGRA30_CLK_AUDIO4_2X, .present = true },
 	[tegra_clk_spdif_2x] = { .dt_id = TEGRA30_CLK_SPDIF_2X, .present = true },
-	[tegra_clk_clk_out_1] = { .dt_id = TEGRA30_CLK_CLK_OUT_1, .present = true },
-	[tegra_clk_clk_out_2] = { .dt_id = TEGRA30_CLK_CLK_OUT_2, .present = true },
-	[tegra_clk_clk_out_3] = { .dt_id = TEGRA30_CLK_CLK_OUT_3, .present = true },
-	[tegra_clk_blink] = { .dt_id = TEGRA30_CLK_BLINK, .present = true },
-	[tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_1_MUX, .present = true },
-	[tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_2_MUX, .present = true },
-	[tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA30_CLK_CLK_OUT_3_MUX, .present = true },
 	[tegra_clk_hclk] = { .dt_id = TEGRA30_CLK_HCLK, .present = true },
 	[tegra_clk_pclk] = { .dt_id = TEGRA30_CLK_PCLK, .present = true },
 	[tegra_clk_i2s0] = { .dt_id = TEGRA30_CLK_I2S0, .present = true },
@@ -1232,9 +1224,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 1 },
 	{ TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 1 },
 	{ TEGRA30_CLK_EXTERN1, TEGRA30_CLK_PLL_A_OUT0, 0, 1 },
-	{ TEGRA30_CLK_CLK_OUT_1_MUX, TEGRA30_CLK_EXTERN1, 0, 0 },
-	{ TEGRA30_CLK_CLK_OUT_1, TEGRA30_CLK_CLK_MAX, 0, 1 },
-	{ TEGRA30_CLK_BLINK, TEGRA30_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA30_CLK_I2S0, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA30_CLK_I2S1, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA30_CLK_I2S2, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
@@ -1364,7 +1353,6 @@ static void __init tegra30_clock_init(struct device_node *np)
 	tegra_audio_clk_init(clk_base, pmc_base, tegra30_clks,
 			     tegra30_audio_plls,
 			     ARRAY_SIZE(tegra30_audio_plls), 24000000);
-	tegra_pmc_clk_init(pmc_base, tegra30_clks);
 
 	tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);
 
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 416a6b09f6a3..2c9a68302e02 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -854,7 +854,6 @@ void tegra_periph_clk_init(void __iomem *clk_base, void __iomem *pmc_base,
 			struct tegra_clk *tegra_clks,
 			struct tegra_clk_pll_params *pll_params);
 
-void tegra_pmc_clk_init(void __iomem *pmc_base, struct tegra_clk *tegra_clks);
 void tegra_fixed_clk_init(struct tegra_clk *tegra_clks);
 int tegra_osc_clk_init(void __iomem *clk_base, struct tegra_clk *clks,
 		       unsigned long *input_freqs, unsigned int num,
-- 
cgit v1.2.3-59-g8ed1b


From efdd205ccbfaa80bd932bc2fba498026c09db502 Mon Sep 17 00:00:00 2001
From: Sowjanya Komatineni <skomatineni@nvidia.com>
Date: Mon, 13 Jan 2020 23:24:27 -0800
Subject: clk: tegra: Remove audio clocks configuration from clock driver

Current clock driver enables PLLA, cdev1 on Tegra20 and extern1 on
Tegra30 and above as a part of clocks init and there is no need to
have these audio clocks enabled by the clock driver.

extern1 is used as parent for clk_out_1 and clk_out_1 is dedicated
for audio mclk on Tegra30 and above Tegra platforms and these clocks
are taken care by ASoC driver.

So, this patch removes audio related clocks configuration from clock
init of Tegra20 and above.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/clk-tegra114.c | 5 ++---
 drivers/clk/tegra/clk-tegra124.c | 5 ++---
 drivers/clk/tegra/clk-tegra20.c  | 5 ++---
 drivers/clk/tegra/clk-tegra210.c | 5 ++---
 drivers/clk/tegra/clk-tegra30.c  | 5 ++---
 5 files changed, 10 insertions(+), 15 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index c138ef75480b..bc9e47a4cb60 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -1136,9 +1136,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA114_CLK_UARTB, TEGRA114_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA114_CLK_UARTC, TEGRA114_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA114_CLK_UARTD, TEGRA114_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA114_CLK_EXTERN1, TEGRA114_CLK_PLL_A_OUT0, 0, 1 },
+	{ TEGRA114_CLK_PLL_A, TEGRA114_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA114_CLK_PLL_A_OUT0, TEGRA114_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA114_CLK_I2S0, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA114_CLK_I2S1, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA114_CLK_I2S2, TEGRA114_CLK_PLL_A_OUT0, 11289600, 0 },
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 54cac77deaa3..64e229ddf2a5 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -1292,9 +1292,8 @@ static struct tegra_clk_init_table common_init_table[] __initdata = {
 	{ TEGRA124_CLK_UARTB, TEGRA124_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA124_CLK_UARTC, TEGRA124_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA124_CLK_UARTD, TEGRA124_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA124_CLK_EXTERN1, TEGRA124_CLK_PLL_A_OUT0, 0, 1 },
+	{ TEGRA124_CLK_PLL_A, TEGRA124_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA124_CLK_PLL_A_OUT0, TEGRA124_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA124_CLK_I2S0, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA124_CLK_I2S1, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA124_CLK_I2S2, TEGRA124_CLK_PLL_A_OUT0, 11289600, 0 },
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 6882d777a7d3..085feb04e913 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1029,9 +1029,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_UARTC, TEGRA20_CLK_PLL_P, 0, 0 },
 	{ TEGRA20_CLK_UARTD, TEGRA20_CLK_PLL_P, 0, 0 },
 	{ TEGRA20_CLK_UARTE, TEGRA20_CLK_PLL_P, 0, 0 },
-	{ TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 1 },
-	{ TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA20_CLK_CDEV1, TEGRA20_CLK_CLK_MAX, 0, 1 },
+	{ TEGRA20_CLK_PLL_A, TEGRA20_CLK_CLK_MAX, 56448000, 0 },
+	{ TEGRA20_CLK_PLL_A_OUT0, TEGRA20_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA20_CLK_I2S1, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA20_CLK_I2S2, TEGRA20_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA20_CLK_SDMMC1, TEGRA20_CLK_PLL_P, 48000000, 0 },
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index d2f1e9c0ed25..c6304f5e813e 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -3442,9 +3442,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA210_CLK_UARTB, TEGRA210_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA210_CLK_UARTC, TEGRA210_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA210_CLK_UARTD, TEGRA210_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA210_CLK_EXTERN1, TEGRA210_CLK_PLL_A_OUT0, 0, 1 },
+	{ TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA210_CLK_I2S0, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA210_CLK_I2S1, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA210_CLK_I2S2, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 },
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 5a12f55ef13b..3255f82e61b5 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1221,9 +1221,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA30_CLK_UARTD, TEGRA30_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA30_CLK_UARTE, TEGRA30_CLK_PLL_P, 408000000, 0 },
-	{ TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 1 },
-	{ TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 1 },
-	{ TEGRA30_CLK_EXTERN1, TEGRA30_CLK_PLL_A_OUT0, 0, 1 },
+	{ TEGRA30_CLK_PLL_A, TEGRA30_CLK_CLK_MAX, 564480000, 0 },
+	{ TEGRA30_CLK_PLL_A_OUT0, TEGRA30_CLK_CLK_MAX, 11289600, 0 },
 	{ TEGRA30_CLK_I2S0, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA30_CLK_I2S1, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
 	{ TEGRA30_CLK_I2S2, TEGRA30_CLK_PLL_A_OUT0, 11289600, 0 },
-- 
cgit v1.2.3-59-g8ed1b


From eec152734be10c72d2d413a27ca9d282c28cdb61 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Tue, 10 Mar 2020 15:37:56 +0100
Subject: clk: qcom: clk-rpm: add missing rpm clk for ipq806x

Add missing definition of rpm clk for ipq806x soc

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200310143756.244-1-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 .../devicetree/bindings/clock/qcom,rpmcc.txt       |  1 +
 drivers/clk/qcom/clk-rpm.c                         | 35 ++++++++++++++++++++++
 include/dt-bindings/clock/qcom,rpmcc.h             |  4 +++
 3 files changed, 40 insertions(+)

(limited to 'drivers/clk')

diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index 356cabcd844d..90a1349bc713 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -16,6 +16,7 @@ Required properties :
 			"qcom,rpmcc-msm8974", "qcom,rpmcc"
 			"qcom,rpmcc-msm8976", "qcom,rpmcc"
 			"qcom,rpmcc-apq8064", "qcom,rpmcc"
+			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
 			"qcom,rpmcc-msm8996", "qcom,rpmcc"
 			"qcom,rpmcc-msm8998", "qcom,rpmcc"
 			"qcom,rpmcc-qcs404", "qcom,rpmcc"
diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c
index 9e3110a71f12..f71d228fd6bd 100644
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -543,10 +543,45 @@ static const struct rpm_clk_desc rpm_clk_apq8064 = {
 	.num_clks = ARRAY_SIZE(apq8064_clks),
 };
 
+/* ipq806x */
+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
+
+static struct clk_rpm *ipq806x_clks[] = {
+	[RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
+	[RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
+	[RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
+	[RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
+	[RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
+	[RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
+	[RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
+	[RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
+	[RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
+	[RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
+	[RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
+	[RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
+	[RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
+	[RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
+	[RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
+	[RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
+};
+
+static const struct rpm_clk_desc rpm_clk_ipq806x = {
+	.clks = ipq806x_clks,
+	.num_clks = ARRAY_SIZE(ipq806x_clks),
+};
+
 static const struct of_device_id rpm_clk_match_table[] = {
 	{ .compatible = "qcom,rpmcc-msm8660", .data = &rpm_clk_msm8660 },
 	{ .compatible = "qcom,rpmcc-apq8060", .data = &rpm_clk_msm8660 },
 	{ .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
+	{ .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
index 8e3095720552..ae74c43c485d 100644
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -37,6 +37,10 @@
 #define RPM_XO_A0				27
 #define RPM_XO_A1				28
 #define RPM_XO_A2				29
+#define RPM_NSS_FABRIC_0_CLK			30
+#define RPM_NSS_FABRIC_0_A_CLK			31
+#define RPM_NSS_FABRIC_1_CLK			32
+#define RPM_NSS_FABRIC_1_A_CLK			33
 
 /* SMD RPM clocks */
 #define RPM_SMD_XO_CLK_SRC				0
-- 
cgit v1.2.3-59-g8ed1b


From 4ae9afbaaeb9bd939ac2bb8d53828fdebca5ec1b Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 9 Mar 2020 18:17:09 +0200
Subject: clk: imx7d: Add PXP clock

The PXP has a single CCGR clock gate, gating both the IPG_CLK_ROOT and
the MAIN_AXI_CLK_ROOT. Add a single clock to cover both.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-imx7d.c             | 1 +
 include/dt-bindings/clock/imx7d-clock.h | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index 0c9f7adb41ae..b2057bd42e25 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -802,6 +802,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	hws[IMX7D_PCIE_PHY_ROOT_CLK] = imx_clk_hw_gate4("pcie_phy_root_clk", "pcie_phy_post_div", base + 0x4600, 0);
 	hws[IMX7D_EPDC_PIXEL_ROOT_CLK] = imx_clk_hw_gate4("epdc_pixel_root_clk", "epdc_pixel_post_div", base + 0x44a0, 0);
 	hws[IMX7D_LCDIF_PIXEL_ROOT_CLK] = imx_clk_hw_gate4("lcdif_pixel_root_clk", "lcdif_pixel_post_div", base + 0x44b0, 0);
+	hws[IMX7D_PXP_CLK] = imx_clk_hw_gate4("pxp_clk", "main_axi_root_clk", base + 0x44c0, 0);
 	hws[IMX7D_MIPI_DSI_ROOT_CLK] = imx_clk_hw_gate4("mipi_dsi_root_clk", "mipi_dsi_post_div", base + 0x4650, 0);
 	hws[IMX7D_MIPI_CSI_ROOT_CLK] = imx_clk_hw_gate4("mipi_csi_root_clk", "mipi_csi_post_div", base + 0x4640, 0);
 	hws[IMX7D_MIPI_DPHY_ROOT_CLK] = imx_clk_hw_gate4("mipi_dphy_root_clk", "mipi_dphy_post_div", base + 0x4660, 0);
diff --git a/include/dt-bindings/clock/imx7d-clock.h b/include/dt-bindings/clock/imx7d-clock.h
index e6a670e1a3f8..1d4c0dfe0202 100644
--- a/include/dt-bindings/clock/imx7d-clock.h
+++ b/include/dt-bindings/clock/imx7d-clock.h
@@ -451,5 +451,6 @@
 #define IMX7D_SNVS_CLK			442
 #define IMX7D_CAAM_CLK			443
 #define IMX7D_KPP_ROOT_CLK		444
-#define IMX7D_CLK_END			445
+#define IMX7D_PXP_CLK			445
+#define IMX7D_CLK_END			446
 #endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
-- 
cgit v1.2.3-59-g8ed1b


From b5881e8019e0d39c43a2da56c4ae616a50615e00 Mon Sep 17 00:00:00 2001
From: Abel Vesa <abel.vesa@nxp.com>
Date: Fri, 13 Mar 2020 18:10:19 +0200
Subject: clk: imx: clk-gate2: Pass the device to the register function

The device needs to be passed on to the clk_hw_register.

Fixes: 1f9aec9662566189 ("clk: imx: clk-gate2: Switch to clk_hw based API")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---
 drivers/clk/imx/clk-gate2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
index 72a7698be791..ce0060e8873e 100644
--- a/drivers/clk/imx/clk-gate2.c
+++ b/drivers/clk/imx/clk-gate2.c
@@ -154,7 +154,7 @@ struct clk_hw *clk_hw_register_gate2(struct device *dev, const char *name,
 	gate->hw.init = &init;
 	hw = &gate->hw;
 
-	ret = clk_hw_register(NULL, hw);
+	ret = clk_hw_register(dev, hw);
 	if (ret) {
 		kfree(gate);
 		return ERR_PTR(ret);
-- 
cgit v1.2.3-59-g8ed1b


From 253a0af508e0ca80bd767e541421a7a7998a3e1e Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Thu, 19 Mar 2020 11:05:30 +0530
Subject: clk: qcom: gcc: Add support for modem clocks in GCC

Add the required modem clocks in global clock controller which are
required to bring the modem out of reset.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1584596131-22741-3-git-send-email-tdas@codeaurora.org
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/gcc-sc7180.c | 72 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 7f59fb8da033..6a51b5b5fc19 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
  */
 
 #include <linux/clk-provider.h>
@@ -2165,6 +2165,71 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };
 
+static struct clk_branch gcc_mss_cfg_ahb_clk = {
+	.halt_reg = 0x8a000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_mfab_axis_clk = {
+	.halt_reg = 0x8a004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_mfab_axis_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_nav_axi_clk = {
+	.halt_reg = 0x8a00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_nav_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_snoc_axi_clk = {
+	.halt_reg = 0x8a150,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a150,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_snoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
+	.halt_reg = 0x8a154,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_q6_memnoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc ufs_phy_gdsc = {
 	.gdscr = 0x77004,
 	.pd = {
@@ -2336,6 +2401,11 @@ static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GPLL7] = &gpll7.clkr,
 	[GPLL4] = &gpll4.clkr,
 	[GPLL1] = &gpll1.clkr,
+	[GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_MFAB_AXIS_CLK] = &gcc_mss_mfab_axis_clk.clkr,
+	[GCC_MSS_NAV_AXI_CLK] = &gcc_mss_nav_axi_clk.clkr,
+	[GCC_MSS_Q6_MEMNOC_AXI_CLK] = &gcc_mss_q6_memnoc_axi_clk.clkr,
+	[GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_sc7180_resets[] = {
-- 
cgit v1.2.3-59-g8ed1b


From 8def929c4097d9014c37d6a3649b21d38ad607d7 Mon Sep 17 00:00:00 2001
From: Taniya Das <tdas@codeaurora.org>
Date: Thu, 19 Mar 2020 11:05:31 +0530
Subject: clk: qcom: Add modem clock controller driver for SC7180

Add support for the modem clock controller found on SC7180
based devices. This would allow modem drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1584596131-22741-4-git-send-email-tdas@codeaurora.org
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/Kconfig      |   9 +++
 drivers/clk/qcom/Makefile     |   1 +
 drivers/clk/qcom/mss-sc7180.c | 143 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 153 insertions(+)
 create mode 100644 drivers/clk/qcom/mss-sc7180.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index af406a7c4aca..11ec6f466467 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -280,6 +280,15 @@ config SC_GPUCC_7180
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.
 
+config SC_MSS_7180
+	tristate "SC7180 Modem Clock Controller"
+	select SC_GCC_7180
+	help
+	  Support for the Modem Subsystem clock controller on Qualcomm
+	  Technologies, Inc on SC7180 devices.
+	  Say Y if you want to use the Modem branch clocks of the Modem
+	  subsystem clock controller to reset the MSS subsystem.
+
 config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
 	select SC_GCC_7180
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index bd6556b829c0..691efbf7e81f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
 obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o
 obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
+obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
 obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
diff --git a/drivers/clk/qcom/mss-sc7180.c b/drivers/clk/qcom/mss-sc7180.c
new file mode 100644
index 000000000000..673fa1a4f734
--- /dev/null
+++ b/drivers/clk/qcom/mss-sc7180.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,mss-sc7180.h>
+
+#include "clk-regmap.h"
+#include "clk-branch.h"
+#include "common.h"
+
+static struct clk_branch mss_axi_nav_clk = {
+	.halt_reg = 0x20bc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20bc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_nav_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_nav_axi",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch mss_axi_crypto_clk = {
+	.halt_reg = 0x20cc,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x20cc,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "mss_axi_crypto_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "gcc_mss_mfab_axis",
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static const struct regmap_config mss_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.fast_io	= true,
+	.max_register	= 0x41aa0cc,
+};
+
+static struct clk_regmap *mss_sc7180_clocks[] = {
+	[MSS_AXI_CRYPTO_CLK] = &mss_axi_crypto_clk.clkr,
+	[MSS_AXI_NAV_CLK] = &mss_axi_nav_clk.clkr,
+};
+
+static const struct qcom_cc_desc mss_sc7180_desc = {
+	.config = &mss_regmap_config,
+	.clks = mss_sc7180_clocks,
+	.num_clks = ARRAY_SIZE(mss_sc7180_clocks),
+};
+
+static int mss_sc7180_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_clk_create(&pdev->dev);
+	if (ret)
+		goto disable_pm_runtime;
+
+	ret = pm_clk_add(&pdev->dev, "cfg_ahb");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to acquire iface clock\n");
+		goto destroy_pm_clk;
+	}
+
+	ret = qcom_cc_probe(pdev, &mss_sc7180_desc);
+	if (ret < 0)
+		goto destroy_pm_clk;
+
+	return 0;
+
+destroy_pm_clk:
+	pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int mss_sc7180_remove(struct platform_device *pdev)
+{
+	pm_clk_destroy(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mss_sc7180_pm_ops = {
+	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static const struct of_device_id mss_sc7180_match_table[] = {
+	{ .compatible = "qcom,sc7180-mss" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mss_sc7180_match_table);
+
+static struct platform_driver mss_sc7180_driver = {
+	.probe		= mss_sc7180_probe,
+	.remove		= mss_sc7180_remove,
+	.driver		= {
+		.name		= "sc7180-mss",
+		.of_match_table = mss_sc7180_match_table,
+		.pm = &mss_sc7180_pm_ops,
+	},
+};
+
+static int __init mss_sc7180_init(void)
+{
+	return platform_driver_register(&mss_sc7180_driver);
+}
+subsys_initcall(mss_sc7180_init);
+
+static void __exit mss_sc7180_exit(void)
+{
+	platform_driver_unregister(&mss_sc7180_driver);
+}
+module_exit(mss_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI MSS SC7180 Driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From 1aec193ea41d672d11592714cdda8167eb3b38fc Mon Sep 17 00:00:00 2001
From: Abhishek Sahu <absahu@codeaurora.org>
Date: Wed, 18 Mar 2020 14:16:56 +0100
Subject: ipq806x: gcc: Added the enable regs and mask for PRNG

Kernel got hanged while reading from /dev/hwrng at the
time of PRNG clock enable

Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)"
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Link: https://lkml.kernel.org/r/20200318131657.345-1-ansuelsmth@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/gcc-ipq806x.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index b0eee0903807..a8456e09c44d 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1224,6 +1224,8 @@ static struct clk_rcg prng_src = {
 		.parent_map = gcc_pxo_pll8_map,
 	},
 	.clkr = {
+		.enable_reg = 0x2e80,
+		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_src",
 			.parent_names = gcc_pxo_pll8,
-- 
cgit v1.2.3-59-g8ed1b


From 8411aa5059edd584f7022f1dc300aa2f8f89fd06 Mon Sep 17 00:00:00 2001
From: Wesley Cheng <wcheng@codeaurora.org>
Date: Tue, 17 Mar 2020 13:53:31 -0700
Subject: clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150

This adds the USB3 PIPE clock and GDSC structures, so
that the USB driver can vote for these resources to be
enabled/disabled when required.  Both are needed for SS
and HS USB paths to operate properly.  The GDSC will
allow the USB system to be brought out of reset, while
the PIPE clock is needed for data transactions between
the PHY and controller.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lkml.kernel.org/r/1584478412-7798-2-git-send-email-wcheng@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/gcc-sm8150.c               | 52 +++++++++++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sm8150.h |  4 +++
 2 files changed, 56 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 20877214acff..ef98fdc51755 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -21,6 +21,7 @@
 #include "clk-rcg.h"
 #include "clk-regmap.h"
 #include "reset.h"
+#include "gdsc.h"
 
 enum {
 	P_BI_TCXO,
@@ -3171,6 +3172,18 @@ static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = {
 	},
 };
 
+static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0xf058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_prim_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_usb3_sec_clkref_clk = {
 	.halt_reg = 0x8c028,
 	.halt_check = BRANCH_HALT,
@@ -3218,6 +3231,18 @@ static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = {
 	},
 };
 
+static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x10058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_sec_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 /*
  * Clock ON depends on external parent 'config noc', so cant poll
  * delay and also mark as crtitical for video boot
@@ -3292,6 +3317,24 @@ static struct clk_branch gcc_video_xo_clk = {
 	},
 };
 
+static struct gdsc usb30_prim_gdsc = {
+		.gdscr = 0xf004,
+		.pd = {
+			.name = "usb30_prim_gdsc",
+		},
+		.pwrsts = PWRSTS_OFF_ON,
+		.flags = POLL_CFG_GDSCR,
+};
+
+static struct gdsc usb30_sec_gdsc = {
+		.gdscr = 0x10004,
+		.pd = {
+			.name = "usb30_sec_gdsc",
+		},
+		.pwrsts = PWRSTS_OFF_ON,
+		.flags = POLL_CFG_GDSCR,
+};
+
 static struct clk_regmap *gcc_sm8150_clocks[] = {
 	[GCC_AGGRE_NOC_PCIE_TBU_CLK] = &gcc_aggre_noc_pcie_tbu_clk.clkr,
 	[GCC_AGGRE_UFS_CARD_AXI_CLK] = &gcc_aggre_ufs_card_axi_clk.clkr,
@@ -3480,10 +3523,12 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
 	[GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
 	[GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
 	[GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
+	[GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr,
 	[GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr,
 	[GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
 	[GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
 	[GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
+	[GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr,
 	[GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr,
 	[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
 	[GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
@@ -3527,6 +3572,11 @@ static const struct qcom_reset_map gcc_sm8150_resets[] = {
 	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
 };
 
+static struct gdsc *gcc_sm8150_gdscs[] = {
+	[USB30_PRIM_GDSC] = &usb30_prim_gdsc,
+	[USB30_SEC_GDSC] = &usb30_sec_gdsc,
+};
+
 static const struct regmap_config gcc_sm8150_regmap_config = {
 	.reg_bits	= 32,
 	.reg_stride	= 4,
@@ -3541,6 +3591,8 @@ static const struct qcom_cc_desc gcc_sm8150_desc = {
 	.num_clks = ARRAY_SIZE(gcc_sm8150_clocks),
 	.resets = gcc_sm8150_resets,
 	.num_resets = ARRAY_SIZE(gcc_sm8150_resets),
+	.gdscs = gcc_sm8150_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_sm8150_gdscs),
 };
 
 static const struct of_device_id gcc_sm8150_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-sm8150.h b/include/dt-bindings/clock/qcom,gcc-sm8150.h
index 90d60ef94c64..3e1a91876610 100644
--- a/include/dt-bindings/clock/qcom,gcc-sm8150.h
+++ b/include/dt-bindings/clock/qcom,gcc-sm8150.h
@@ -240,4 +240,8 @@
 #define GCC_USB30_SEC_BCR					27
 #define GCC_USB_PHY_CFG_AHB2PHY_BCR				28
 
+/* GCC GDSCRs */
+#define USB30_PRIM_GDSC                     4
+#define USB30_SEC_GDSC						5
+
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From dc6a81c3382f74fe94eb0b8c616493598926efff Mon Sep 17 00:00:00 2001
From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
Date: Tue, 17 Mar 2020 23:11:33 +0800
Subject: clk: Ingenic: Add support for TCU of X1000.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

X1000 has a different TCU, since X1000 OST has been independent of TCU.
This patch is add TCU support of X1000, and prepare for later OST driver.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Link: https://lkml.kernel.org/r/1584457893-40418-3-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ingenic/tcu.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
index ad7daa494fd4..879990762f57 100644
--- a/drivers/clk/ingenic/tcu.c
+++ b/drivers/clk/ingenic/tcu.c
@@ -317,10 +317,17 @@ static const struct ingenic_soc_info jz4770_soc_info = {
 	.has_tcu_clk = false,
 };
 
+static const struct ingenic_soc_info x1000_soc_info = {
+	.num_channels = 8,
+	.has_ost = false, /* X1000 has OST, but it not belong TCU */
+	.has_tcu_clk = false,
+};
+
 static const struct of_device_id ingenic_tcu_of_match[] __initconst = {
 	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
 	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
 	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4770_soc_info, },
+	{ .compatible = "ingenic,x1000-tcu", .data = &x1000_soc_info, },
 	{ /* sentinel */ }
 };
 
@@ -471,3 +478,4 @@ static void __init ingenic_tcu_init(struct device_node *np)
 CLK_OF_DECLARE_DRIVER(jz4740_cgu, "ingenic,jz4740-tcu", ingenic_tcu_init);
 CLK_OF_DECLARE_DRIVER(jz4725b_cgu, "ingenic,jz4725b-tcu", ingenic_tcu_init);
 CLK_OF_DECLARE_DRIVER(jz4770_cgu, "ingenic,jz4770-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE_DRIVER(x1000_cgu, "ingenic,x1000-tcu", ingenic_tcu_init);
-- 
cgit v1.2.3-59-g8ed1b


From 6673db4f3f261b8ea955f0130eb8cc28b57f500b Mon Sep 17 00:00:00 2001
From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
Date: Fri, 21 Feb 2020 00:24:43 +0800
Subject: clk: JZ4780: Add function for enable the second core.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add "jz4780_core1_enable()" for enable the second core of JZ4780,
prepare for later commits.

Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lkml.kernel.org/r/1582215889-113034-3-git-send-email-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ingenic/jz4780-cgu.c | 55 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 50 insertions(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff72bf0..c758f1643067 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -9,14 +9,16 @@
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/of.h>
+
 #include <dt-bindings/clock/jz4780-cgu.h>
 #include "cgu.h"
 #include "pm.h"
 
 /* CGU register offsets */
 #define CGU_REG_CLOCKCONTROL	0x00
-#define CGU_REG_PLLCONTROL	0x0c
+#define CGU_REG_LCR			0x04
 #define CGU_REG_APLL		0x10
 #define CGU_REG_MPLL		0x14
 #define CGU_REG_EPLL		0x18
@@ -46,8 +48,8 @@
 #define CGU_REG_CLOCKSTATUS	0xd4
 
 /* bits within the OPCR register */
-#define OPCR_SPENDN0		(1 << 7)
-#define OPCR_SPENDN1		(1 << 6)
+#define OPCR_SPENDN0		BIT(7)
+#define OPCR_SPENDN1		BIT(6)
 
 /* bits within the USBPCR register */
 #define USBPCR_USB_MODE		BIT(31)
@@ -88,6 +90,13 @@
 #define USBVBFIL_IDDIGFIL_MASK	(0xffff << USBVBFIL_IDDIGFIL_SHIFT)
 #define USBVBFIL_USBVBFIL_MASK	(0xffff)
 
+/* bits within the LCR register */
+#define LCR_PD_SCPU			BIT(31)
+#define LCR_SCPUS			BIT(27)
+
+/* bits within the CLKGR1 register */
+#define CLKGR1_CORE1		BIT(15)
+
 static struct ingenic_cgu *cgu;
 
 static u8 jz4780_otg_phy_get_parent(struct clk_hw *hw)
@@ -205,6 +214,42 @@ static const struct clk_ops jz4780_otg_phy_ops = {
 	.set_rate = jz4780_otg_phy_set_rate,
 };
 
+static int jz4780_core1_enable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const unsigned int timeout = 5000;
+	unsigned long flags;
+	int retval;
+	u32 lcr, clkgr1;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+
+	lcr = readl(cgu->base + CGU_REG_LCR);
+	lcr &= ~LCR_PD_SCPU;
+	writel(lcr, cgu->base + CGU_REG_LCR);
+
+	clkgr1 = readl(cgu->base + CGU_REG_CLKGR1);
+	clkgr1 &= ~CLKGR1_CORE1;
+	writel(clkgr1, cgu->base + CGU_REG_CLKGR1);
+
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	/* wait for the CPU to be powered up */
+	retval = readl_poll_timeout(cgu->base + CGU_REG_LCR, lcr,
+				 !(lcr & LCR_SCPUS), 10, timeout);
+	if (retval == -ETIMEDOUT) {
+		pr_err("%s: Wait for power up core1 timeout\n", __func__);
+		return retval;
+	}
+
+	return 0;
+}
+
+static const struct clk_ops jz4780_core1_ops = {
+	.enable = jz4780_core1_enable,
+};
+
 static const s8 pll_od_encoding[16] = {
 	0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
 	0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
@@ -699,9 +744,9 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	},
 
 	[JZ4780_CLK_CORE1] = {
-		"core1", CGU_CLK_GATE,
+		"core1", CGU_CLK_CUSTOM,
 		.parents = { JZ4780_CLK_CPU, -1, -1, -1 },
-		.gate = { CGU_REG_CLKGR1, 15 },
+		.custom = { &jz4780_core1_ops },
 	},
 
 };
-- 
cgit v1.2.3-59-g8ed1b


From 1aa0817e43c525c3ee035786a17a19077a0bb06a Mon Sep 17 00:00:00 2001
From: Vignesh Raghavendra <vigneshr@ti.com>
Date: Thu, 27 Feb 2020 11:05:29 +0530
Subject: clk: keystone: Add new driver to handle syscon based clocks

On TI's AM654/J721e SoCs, certain clocks can be gated/ungated by setting
a single bit in SoC's System Control Module registers. Sometime more
than one clock control can be in the same register.

Add a driver to support such clocks using syscon framework. Driver
currently supports controlling EHRPWM's TimeBase clock(TBCLK) for AM654
SoC.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lkml.kernel.org/r/20200227053529.16479-3-vigneshr@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/keystone/Kconfig      |   8 ++
 drivers/clk/keystone/Makefile     |   1 +
 drivers/clk/keystone/syscon-clk.c | 172 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 181 insertions(+)
 create mode 100644 drivers/clk/keystone/syscon-clk.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/keystone/Kconfig b/drivers/clk/keystone/Kconfig
index 38aeefb1e808..ab613f28b502 100644
--- a/drivers/clk/keystone/Kconfig
+++ b/drivers/clk/keystone/Kconfig
@@ -26,3 +26,11 @@ config TI_SCI_CLK_PROBE_FROM_FW
 	  This is mostly only useful for debugging purposes, and will
 	  increase the boot time of the device. If you want the clocks probed
 	  from firmware, say Y. Otherwise, say N.
+
+config TI_SYSCON_CLK
+	tristate "Syscon based clock driver for K2/K3 SoCs"
+	depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	default ARCH_KEYSTONE || ARCH_K3
+	help
+	  This adds clock driver support for syscon based gate
+	  clocks on TI's K2 and K3 SoCs.
diff --git a/drivers/clk/keystone/Makefile b/drivers/clk/keystone/Makefile
index d044de6f965c..0e426e648f7c 100644
--- a/drivers/clk/keystone/Makefile
+++ b/drivers/clk/keystone/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= pll.o gate.o
 obj-$(CONFIG_TI_SCI_CLK)		+= sci-clk.o
+obj-$(CONFIG_TI_SYSCON_CLK)		+= syscon-clk.o
diff --git a/drivers/clk/keystone/syscon-clk.c b/drivers/clk/keystone/syscon-clk.c
new file mode 100644
index 000000000000..8d7dbea3bd30
--- /dev/null
+++ b/drivers/clk/keystone/syscon-clk.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct ti_syscon_gate_clk_priv {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u32 reg;
+	u32 idx;
+};
+
+struct ti_syscon_gate_clk_data {
+	char *name;
+	u32 offset;
+	u32 bit_idx;
+};
+
+static struct
+ti_syscon_gate_clk_priv *to_ti_syscon_gate_clk_priv(struct clk_hw *hw)
+{
+	return container_of(hw, struct ti_syscon_gate_clk_priv, hw);
+}
+
+static int ti_syscon_gate_clk_enable(struct clk_hw *hw)
+{
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	return regmap_write_bits(priv->regmap, priv->reg, priv->idx,
+				 priv->idx);
+}
+
+static void ti_syscon_gate_clk_disable(struct clk_hw *hw)
+{
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	regmap_write_bits(priv->regmap, priv->reg, priv->idx, 0);
+}
+
+static int ti_syscon_gate_clk_is_enabled(struct clk_hw *hw)
+{
+	unsigned int val;
+	struct ti_syscon_gate_clk_priv *priv = to_ti_syscon_gate_clk_priv(hw);
+
+	regmap_read(priv->regmap, priv->reg, &val);
+
+	return !!(val & priv->idx);
+}
+
+static const struct clk_ops ti_syscon_gate_clk_ops = {
+	.enable		= ti_syscon_gate_clk_enable,
+	.disable	= ti_syscon_gate_clk_disable,
+	.is_enabled	= ti_syscon_gate_clk_is_enabled,
+};
+
+static struct clk_hw
+*ti_syscon_gate_clk_register(struct device *dev, struct regmap *regmap,
+			     const struct ti_syscon_gate_clk_data *data)
+{
+	struct ti_syscon_gate_clk_priv *priv;
+	struct clk_init_data init;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = data->name;
+	init.ops = &ti_syscon_gate_clk_ops;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	init.flags = 0;
+
+	priv->regmap = regmap;
+	priv->reg = data->offset;
+	priv->idx = BIT(data->bit_idx);
+	priv->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &priv->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &priv->hw;
+}
+
+static int ti_syscon_gate_clk_probe(struct platform_device *pdev)
+{
+	const struct ti_syscon_gate_clk_data *data, *p;
+	struct clk_hw_onecell_data *hw_data;
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	int num_clks, i;
+
+	data = device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
+
+	regmap = syscon_node_to_regmap(dev->of_node);
+	if (IS_ERR(regmap)) {
+		if (PTR_ERR(regmap) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(dev, "failed to find parent regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	num_clks = 0;
+	for (p = data; p->name; p++)
+		num_clks++;
+
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, num_clks),
+			       GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	hw_data->num = num_clks;
+
+	for (i = 0; i < num_clks; i++) {
+		hw_data->hws[i] = ti_syscon_gate_clk_register(dev, regmap,
+							      &data[i]);
+		if (IS_ERR(hw_data->hws[i]))
+			dev_warn(dev, "failed to register %s\n",
+				 data[i].name);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   hw_data);
+}
+
+#define TI_SYSCON_CLK_GATE(_name, _offset, _bit_idx)	\
+	{						\
+		.name = _name,				\
+		.offset = (_offset),			\
+		.bit_idx = (_bit_idx),			\
+	}
+
+static const struct ti_syscon_gate_clk_data am654_clk_data[] = {
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk0", 0x0, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk1", 0x4, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk2", 0x8, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk3", 0xc, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk4", 0x10, 0),
+	TI_SYSCON_CLK_GATE("ehrpwm_tbclk5", 0x14, 0),
+	{ /* Sentinel */ },
+};
+
+static const struct of_device_id ti_syscon_gate_clk_ids[] = {
+	{
+		.compatible = "ti,am654-ehrpwm-tbclk",
+		.data = &am654_clk_data,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ti_syscon_gate_clk_ids);
+
+static struct platform_driver ti_syscon_gate_clk_driver = {
+	.probe = ti_syscon_gate_clk_probe,
+	.driver = {
+		.name = "ti-syscon-gate-clk",
+		.of_match_table = ti_syscon_gate_clk_ids,
+	},
+};
+module_platform_driver(ti_syscon_gate_clk_driver);
+
+MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>");
+MODULE_DESCRIPTION("Syscon backed gate-clock driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From c067b46d731a764fc46ecc466c2967088c97089e Mon Sep 17 00:00:00 2001
From: Paul Cercueil <paul@crapouillou.net>
Date: Thu, 13 Feb 2020 13:19:51 -0300
Subject: clk: ingenic/jz4770: Exit with error if CGU init failed

Exit jz4770_cgu_init() if the 'cgu' pointer we get is NULL, since the
pointer is passed as argument to functions later on.

Fixes: 7a01c19007ad ("clk: Add Ingenic jz4770 CGU driver")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lkml.kernel.org/r/20200213161952.37460-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ingenic/jz4770-cgu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
index 956dd653a43d..c051ecba5cf8 100644
--- a/drivers/clk/ingenic/jz4770-cgu.c
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -432,8 +432,10 @@ static void __init jz4770_cgu_init(struct device_node *np)
 
 	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
 			      ARRAY_SIZE(jz4770_cgu_clocks), np);
-	if (!cgu)
+	if (!cgu) {
 		pr_err("%s: failed to initialise CGU\n", __func__);
+		return;
+	}
 
 	retval = ingenic_cgu_register_clocks(cgu);
 	if (retval)
-- 
cgit v1.2.3-59-g8ed1b


From edcc42945dee85e9dec3737f3dbf59d917ae5418 Mon Sep 17 00:00:00 2001
From: Paul Cercueil <paul@crapouillou.net>
Date: Thu, 13 Feb 2020 13:19:52 -0300
Subject: clk: ingenic/TCU: Fix round_rate returning error

When requesting a rate superior to the parent's rate, it would return
-EINVAL instead of simply returning the parent's rate like it should.

Fixes: 4f89e4b8f121 ("clk: ingenic: Add driver for the TCU clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200213161952.37460-2-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ingenic/tcu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ingenic/tcu.c b/drivers/clk/ingenic/tcu.c
index 879990762f57..153a954b0d2f 100644
--- a/drivers/clk/ingenic/tcu.c
+++ b/drivers/clk/ingenic/tcu.c
@@ -189,7 +189,7 @@ static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
 	u8 prescale;
 
 	if (req_rate > rate)
-		return -EINVAL;
+		return rate;
 
 	prescale = ingenic_tcu_get_prescale(rate, req_rate);
 
-- 
cgit v1.2.3-59-g8ed1b


From a37a5a9d715f0dc30761bf469f85bc5e02240cf5 Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Tue, 10 Mar 2020 15:55:07 +0200
Subject: clk: Fix trivia typo in comment exlusive => exclusive

Fix trivia typo in comment exlusive => exclusive.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lkml.kernel.org/r/20200310135507.87959-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f0f2b599fd7e..1aa21178068f 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -774,7 +774,7 @@ static void clk_core_rate_restore_protect(struct clk_core *core, int count)
  * clk_rate_exclusive_get - get exclusivity over the clk rate control
  * @clk: the clk over which the exclusity of rate control is requested
  *
- * clk_rate_exlusive_get() begins a critical section during which a clock
+ * clk_rate_exclusive_get() begins a critical section during which a clock
  * consumer cannot tolerate any other consumer making any operation on the
  * clock which could result in a rate change or rate glitch. Exclusive clocks
  * cannot have their rate changed, either directly or indirectly due to changes
-- 
cgit v1.2.3-59-g8ed1b


From eb9d6428a7dbd82255b9eabf4ffab54c230b06bc Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 19 Feb 2020 11:33:25 +0100
Subject: clk: versatile: Export icst_clk_setup()

Export this clock setup method so we can register the
IM-PD1 clocks with common code in the next step.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lkml.kernel.org/r/20200219103326.81120-2-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/versatile/clk-icst.c | 25 +++++++------------------
 drivers/clk/versatile/clk-icst.h | 21 +++++++++++++++++++++
 2 files changed, 28 insertions(+), 18 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index fe686f77787f..692be2fd9261 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -33,18 +33,6 @@
 
 #define INTEGRATOR_AP_PCI_25_33_MHZ BIT(8)
 
-/**
- * enum icst_control_type - the type of ICST control register
- */
-enum icst_control_type {
-	ICST_VERSATILE, /* The standard type, all control bits available */
-	ICST_INTEGRATOR_AP_CM, /* Only 8 bits of VDW available */
-	ICST_INTEGRATOR_AP_SYS, /* Only 8 bits of VDW available */
-	ICST_INTEGRATOR_AP_PCI, /* Odd bit pattern storage */
-	ICST_INTEGRATOR_CP_CM_CORE, /* Only 8 bits of VDW and 3 bits of OD */
-	ICST_INTEGRATOR_CP_CM_MEM, /* Only 8 bits of VDW and 3 bits of OD */
-};
-
 /**
  * struct clk_icst - ICST VCO clock wrapper
  * @hw: corresponding clock hardware entry
@@ -344,12 +332,12 @@ static const struct clk_ops icst_ops = {
 	.set_rate = icst_set_rate,
 };
 
-static struct clk *icst_clk_setup(struct device *dev,
-				  const struct clk_icst_desc *desc,
-				  const char *name,
-				  const char *parent_name,
-				  struct regmap *map,
-				  enum icst_control_type ctype)
+struct clk *icst_clk_setup(struct device *dev,
+			   const struct clk_icst_desc *desc,
+			   const char *name,
+			   const char *parent_name,
+			   struct regmap *map,
+			   enum icst_control_type ctype)
 {
 	struct clk *clk;
 	struct clk_icst *icst;
@@ -386,6 +374,7 @@ static struct clk *icst_clk_setup(struct device *dev,
 
 	return clk;
 }
+EXPORT_SYMBOL_GPL(icst_clk_setup);
 
 struct clk *icst_clk_register(struct device *dev,
 			const struct clk_icst_desc *desc,
diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
index e36ca1a20e90..1206f008c11a 100644
--- a/drivers/clk/versatile/clk-icst.h
+++ b/drivers/clk/versatile/clk-icst.h
@@ -1,4 +1,18 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+struct regmap;
+
+/**
+ * enum icst_control_type - the type of ICST control register
+ */
+enum icst_control_type {
+	ICST_VERSATILE, /* The standard type, all control bits available */
+	ICST_INTEGRATOR_AP_CM, /* Only 8 bits of VDW available */
+	ICST_INTEGRATOR_AP_SYS, /* Only 8 bits of VDW available */
+	ICST_INTEGRATOR_AP_PCI, /* Odd bit pattern storage */
+	ICST_INTEGRATOR_CP_CM_CORE, /* Only 8 bits of VDW and 3 bits of OD */
+	ICST_INTEGRATOR_CP_CM_MEM, /* Only 8 bits of VDW and 3 bits of OD */
+};
+
 /**
  * struct clk_icst_desc - descriptor for the ICST VCO
  * @params: ICST parameters
@@ -17,3 +31,10 @@ struct clk *icst_clk_register(struct device *dev,
 			      const char *name,
 			      const char *parent_name,
 			      void __iomem *base);
+
+struct clk *icst_clk_setup(struct device *dev,
+			   const struct clk_icst_desc *desc,
+			   const char *name,
+			   const char *parent_name,
+			   struct regmap *map,
+			   enum icst_control_type ctype);
-- 
cgit v1.2.3-59-g8ed1b


From 84655b762a276f4ad033288954f698e136704178 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 19 Feb 2020 11:33:26 +0100
Subject: clk: versatile: Add device tree probing for IM-PD1 clocks

As we want to move these clocks over to probe from the device
tree we add a device tree probing path.

The old platform data path will be deleted once we have the
device tree overall code in place.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lkml.kernel.org/r/20200219103326.81120-3-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/versatile/clk-icst.h  |  1 +
 drivers/clk/versatile/clk-impd1.c | 79 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h
index 1206f008c11a..1a119ef11066 100644
--- a/drivers/clk/versatile/clk-icst.h
+++ b/drivers/clk/versatile/clk-icst.h
@@ -11,6 +11,7 @@ enum icst_control_type {
 	ICST_INTEGRATOR_AP_PCI, /* Odd bit pattern storage */
 	ICST_INTEGRATOR_CP_CM_CORE, /* Only 8 bits of VDW and 3 bits of OD */
 	ICST_INTEGRATOR_CP_CM_MEM, /* Only 8 bits of VDW and 3 bits of OD */
+	ICST_INTEGRATOR_IM_PD1, /* Like the Versatile, all control bits */
 };
 
 /**
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index 1991f15a5db9..b05da8516d4c 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -7,7 +7,11 @@
 #include <linux/clkdev.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 #include <linux/platform_data/clk-integrator.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include "icst.h"
 #include "clk-icst.h"
@@ -175,3 +179,78 @@ void integrator_impd1_clk_exit(unsigned int id)
 	kfree(imc->pclkname);
 }
 EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit);
+
+static int integrator_impd1_clk_spawn(struct device *dev,
+				      struct device_node *parent,
+				      struct device_node *np)
+{
+	struct regmap *map;
+	struct clk *clk = ERR_PTR(-EINVAL);
+	const char *name = np->name;
+	const char *parent_name;
+	const struct clk_icst_desc *desc;
+	int ret;
+
+	map = syscon_node_to_regmap(parent);
+	if (IS_ERR(map)) {
+		pr_err("no regmap for syscon IM-PD1 ICST clock parent\n");
+		return PTR_ERR(map);
+	}
+
+	if (of_device_is_compatible(np, "arm,impd1-vco1")) {
+		desc = &impd1_icst1_desc;
+	} else if (of_device_is_compatible(np, "arm,impd1-vco2")) {
+		desc = &impd1_icst2_desc;
+	} else {
+		dev_err(dev, "not a clock node %s\n", name);
+		return -ENODEV;
+	}
+
+	parent_name = of_clk_get_parent_name(np, 0);
+	clk = icst_clk_setup(NULL, desc, name, parent_name, map,
+			     ICST_INTEGRATOR_IM_PD1);
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(np, of_clk_src_simple_get, clk);
+		ret = 0;
+	} else {
+		dev_err(dev, "error setting up IM-PD1 ICST clock\n");
+		ret = PTR_ERR(clk);
+	}
+
+	return ret;
+}
+
+static int integrator_impd1_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	int ret = 0;
+
+	for_each_available_child_of_node(np, child) {
+		ret = integrator_impd1_clk_spawn(dev, np, child);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static const struct of_device_id impd1_syscon_match[] = {
+	{ .compatible = "arm,im-pd1-syscon", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, impd1_syscon_match);
+
+static struct platform_driver impd1_clk_driver = {
+	.driver = {
+		.name = "impd1-clk",
+		.of_match_table = impd1_syscon_match,
+	},
+	.probe  = integrator_impd1_clk_probe,
+};
+builtin_platform_driver(impd1_clk_driver);
+
+MODULE_AUTHOR("Linus Walleij <linusw@kernel.org>");
+MODULE_DESCRIPTION("Arm IM-PD1 module clock driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From 02ff48e4d7f7f253008f3aeadd41c8a2fc640587 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: Fri, 14 Feb 2020 15:59:33 +0100
Subject: clk: at91: add at91rm9200 pmc driver

Add a driver for the PMC clocks of the at91rm9200.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20200214145934.53648-1-alexandre.belloni@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/Makefile     |   1 +
 drivers/clk/at91/at91rm9200.c | 199 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 200 insertions(+)
 create mode 100644 drivers/clk/at91/at91rm9200.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 7ab244f346c4..8b90357f2a93 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_HAVE_AT91_H32MX)		+= clk-h32mx.o
 obj-$(CONFIG_HAVE_AT91_GENERATED_CLK)	+= clk-generated.o
 obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK)	+= clk-i2s-mux.o
 obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
 obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o
diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
new file mode 100644
index 000000000000..c44a431b6c97
--- /dev/null
+++ b/drivers/clk/at91/at91rm9200.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+struct sck {
+	char *n;
+	char *p;
+	u8 id;
+};
+
+struct pck {
+	char *n;
+	u8 id;
+};
+
+static const struct clk_master_characteristics rm9200_mck_characteristics = {
+	.output = { .min = 0, .max = 80000000 },
+	.divisors = { 1, 2, 3, 4 },
+};
+
+static u8 rm9200_pll_out[] = { 0, 2 };
+
+static const struct clk_range rm9200_pll_outputs[] = {
+	{ .min = 80000000, .max = 160000000 },
+	{ .min = 150000000, .max = 180000000 },
+};
+
+static const struct clk_pll_characteristics rm9200_pll_characteristics = {
+	.input = { .min = 1000000, .max = 32000000 },
+	.num_output = ARRAY_SIZE(rm9200_pll_outputs),
+	.output = rm9200_pll_outputs,
+	.out = rm9200_pll_out,
+};
+
+static const struct sck at91rm9200_systemck[] = {
+	{ .n = "udpck", .p = "usbck",    .id = 2 },
+	{ .n = "uhpck", .p = "usbck",    .id = 4 },
+	{ .n = "pck0",  .p = "prog0",    .id = 8 },
+	{ .n = "pck1",  .p = "prog1",    .id = 9 },
+	{ .n = "pck2",  .p = "prog2",    .id = 10 },
+	{ .n = "pck3",  .p = "prog3",    .id = 11 },
+};
+
+static const struct pck at91rm9200_periphck[] = {
+	{ .n = "pioA_clk",   .id = 2 },
+	{ .n = "pioB_clk",   .id = 3 },
+	{ .n = "pioC_clk",   .id = 4 },
+	{ .n = "pioD_clk",   .id = 5 },
+	{ .n = "usart0_clk", .id = 6 },
+	{ .n = "usart1_clk", .id = 7 },
+	{ .n = "usart2_clk", .id = 8 },
+	{ .n = "usart3_clk", .id = 9 },
+	{ .n = "mci0_clk",   .id = 10 },
+	{ .n = "udc_clk",    .id = 11 },
+	{ .n = "twi0_clk",   .id = 12 },
+	{ .n = "spi0_clk",   .id = 13 },
+	{ .n = "ssc0_clk",   .id = 14 },
+	{ .n = "ssc1_clk",   .id = 15 },
+	{ .n = "ssc2_clk",   .id = 16 },
+	{ .n = "tc0_clk",    .id = 17 },
+	{ .n = "tc1_clk",    .id = 18 },
+	{ .n = "tc2_clk",    .id = 19 },
+	{ .n = "tc3_clk",    .id = 20 },
+	{ .n = "tc4_clk",    .id = 21 },
+	{ .n = "tc5_clk",    .id = 22 },
+	{ .n = "ohci_clk",   .id = 23 },
+	{ .n = "macb0_clk",  .id = 24 },
+};
+
+static void __init at91rm9200_pmc_setup(struct device_node *np)
+{
+	const char *slowxtal_name, *mainxtal_name;
+	struct pmc_data *at91rm9200_pmc;
+	u32 usb_div[] = { 1, 2, 0, 0 };
+	const char *parent_names[6];
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int i;
+	bool bypass;
+
+	i = of_property_match_string(np, "clock-names", "slow_xtal");
+	if (i < 0)
+		return;
+
+	slowxtal_name = of_clk_get_parent_name(np, i);
+
+	i = of_property_match_string(np, "clock-names", "main_xtal");
+	if (i < 0)
+		return;
+	mainxtal_name = of_clk_get_parent_name(np, i);
+
+	regmap = device_node_to_regmap(np);
+	if (IS_ERR(regmap))
+		return;
+
+	at91rm9200_pmc = pmc_data_allocate(PMC_MAIN + 1,
+					    nck(at91rm9200_systemck),
+					    nck(at91rm9200_periphck), 0);
+	if (!at91rm9200_pmc)
+		return;
+
+	bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+	hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+					bypass);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_rm9200_main(regmap, "mainck", "main_osc");
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91rm9200_pmc->chws[PMC_MAIN] = hw;
+
+	hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+				   &at91rm9200_pll_layout,
+				   &rm9200_pll_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	hw = at91_clk_register_pll(regmap, "pllbck", "mainck", 1,
+				   &at91rm9200_pll_layout,
+				   &rm9200_pll_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slowxtal_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "pllack";
+	parent_names[3] = "pllbck";
+	hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+				      &at91rm9200_master_layout,
+				      &rm9200_mck_characteristics);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	at91rm9200_pmc->chws[PMC_MCK] = hw;
+
+	hw = at91rm9200_clk_register_usb(regmap, "usbck", "pllbck", usb_div);
+	if (IS_ERR(hw))
+		goto err_free;
+
+	parent_names[0] = slowxtal_name;
+	parent_names[1] = "mainck";
+	parent_names[2] = "pllack";
+	parent_names[3] = "pllbck";
+	for (i = 0; i < 4; i++) {
+		char name[6];
+
+		snprintf(name, sizeof(name), "prog%d", i);
+
+		hw = at91_clk_register_programmable(regmap, name,
+						    parent_names, 4, i,
+						    &at91rm9200_programmable_layout);
+		if (IS_ERR(hw))
+			goto err_free;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91rm9200_systemck); i++) {
+		hw = at91_clk_register_system(regmap, at91rm9200_systemck[i].n,
+					      at91rm9200_systemck[i].p,
+					      at91rm9200_systemck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91rm9200_pmc->shws[at91rm9200_systemck[i].id] = hw;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(at91rm9200_periphck); i++) {
+		hw = at91_clk_register_peripheral(regmap,
+						  at91rm9200_periphck[i].n,
+						  "masterck",
+						  at91rm9200_periphck[i].id);
+		if (IS_ERR(hw))
+			goto err_free;
+
+		at91rm9200_pmc->phws[at91rm9200_periphck[i].id] = hw;
+	}
+
+	of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91rm9200_pmc);
+
+	return;
+
+err_free:
+	pmc_data_free(at91rm9200_pmc);
+}
+/*
+ * While the TCB can be used as the clocksource, the system timer is most likely
+ * to be used instead. However, the pinctrl driver doesn't support probe
+ * deferring properly. Once this is fixed, this can be switched to a platform
+ * driver.
+ */
+CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
+		      at91rm9200_pmc_setup);
-- 
cgit v1.2.3-59-g8ed1b


From b3296386c512de4b68242cabac880bc9d24cfdf6 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:38 +0100
Subject: clk: mmp2: Remove a unused prototype

There is no mmp_clk_register_pll2() routine.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-2-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 70bb73257647..5bcbced3f458 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -124,9 +124,6 @@ extern struct clk *mmp_clk_register_gate(struct device *dev, const char *name,
 			u32 val_disable, unsigned int gate_flags,
 			spinlock_t *lock);
 
-
-extern struct clk *mmp_clk_register_pll2(const char *name,
-		const char *parent_name, unsigned long flags);
 extern struct clk *mmp_clk_register_apbc(const char *name,
 		const char *parent_name, void __iomem *base,
 		unsigned int delay, unsigned int apbc_flags, spinlock_t *lock);
-- 
cgit v1.2.3-59-g8ed1b


From cb8dbfe831758fb2ba52d8c30db5249e48f57b8b Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:39 +0100
Subject: clk: mmp2: Constify some strings

All the parent clock names for the muxes are constant. Add const.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-3-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-mix.c     |  2 +-
 drivers/clk/mmp/clk-of-mmp2.c | 13 +++++++------
 drivers/clk/mmp/clk.h         |  4 ++--
 3 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-mix.c b/drivers/clk/mmp/clk-mix.c
index d2cd36c54474..7a351ec65564 100644
--- a/drivers/clk/mmp/clk-mix.c
+++ b/drivers/clk/mmp/clk-mix.c
@@ -441,7 +441,7 @@ const struct clk_ops mmp_clk_mix_ops = {
 
 struct clk *mmp_clk_register_mix(struct device *dev,
 					const char *name,
-					const char **parent_names,
+					const char * const *parent_names,
 					u8 num_parents,
 					unsigned long flags,
 					struct mmp_clk_mix_config *config,
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 6e71591e63a0..ee086d971416 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -127,16 +127,16 @@ static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
 static DEFINE_SPINLOCK(uart0_lock);
 static DEFINE_SPINLOCK(uart1_lock);
 static DEFINE_SPINLOCK(uart2_lock);
-static const char *uart_parent_names[] = {"uart_pll", "vctcxo"};
+static const char * const uart_parent_names[] = {"uart_pll", "vctcxo"};
 
 static DEFINE_SPINLOCK(ssp0_lock);
 static DEFINE_SPINLOCK(ssp1_lock);
 static DEFINE_SPINLOCK(ssp2_lock);
 static DEFINE_SPINLOCK(ssp3_lock);
-static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
+static const char * const ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
 
 static DEFINE_SPINLOCK(timer_lock);
-static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
+static const char * const timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
 
 static DEFINE_SPINLOCK(reset_lock);
 
@@ -190,7 +190,7 @@ static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
 }
 
 static DEFINE_SPINLOCK(sdh_lock);
-static const char *sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
+static const char * const sdh_parent_names[] = {"pll1_4", "pll2", "usb_pll", "pll1"};
 static struct mmp_clk_mix_config sdh_mix_config = {
 	.reg_info = DEFINE_MIX_REG_INFO(4, 10, 2, 8, 32),
 };
@@ -201,11 +201,12 @@ static DEFINE_SPINLOCK(usbhsic1_lock);
 
 static DEFINE_SPINLOCK(disp0_lock);
 static DEFINE_SPINLOCK(disp1_lock);
-static const char *disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
+static const char * const disp_parent_names[] = {"pll1", "pll1_16", "pll2", "vctcxo"};
 
 static DEFINE_SPINLOCK(ccic0_lock);
 static DEFINE_SPINLOCK(ccic1_lock);
-static const char *ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+static const char * const ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
+
 static struct mmp_clk_mix_config ccic0_mix_config = {
 	.reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32),
 };
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 5bcbced3f458..37d1e1d7b664 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -97,7 +97,7 @@ struct mmp_clk_mix {
 extern const struct clk_ops mmp_clk_mix_ops;
 extern struct clk *mmp_clk_register_mix(struct device *dev,
 					const char *name,
-					const char **parent_names,
+					const char * const *parent_names,
 					u8 num_parents,
 					unsigned long flags,
 					struct mmp_clk_mix_config *config,
@@ -193,7 +193,7 @@ void mmp_register_gate_clks(struct mmp_clk_unit *unit,
 struct mmp_param_mux_clk {
 	unsigned int id;
 	char *name;
-	const char **parent_name;
+	const char * const *parent_name;
 	u8 num_parents;
 	unsigned long flags;
 	unsigned long offset;
-- 
cgit v1.2.3-59-g8ed1b


From 5d34d0b32d6c13947b0aa890fc4c68f203491169 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:41 +0100
Subject: clk: mmp2: Add support for PLL clock sources

The clk-of-mmp2 driver pretends that the clock outputs from the PLLs are
constant, but in fact they are configurable.

Add logic for obtaining the actual clock rates on MMP2 as well as MMP3.
There is no documentation for either SoC, but the "systemsetting" drivers
from Marvell GPL code dump provide some clue as far as MPMU registers on
MMP2 [1] and MMP3 [2] go.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp3-dell-ariel.git/tree/drivers/char/mmp2_systemsetting.c
[2] https://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp3-dell-ariel.git/tree/drivers/char/mmp3_systemsetting.c

A separate commit will adjust the clk-of-mmp2 driver.

Tested on a MMP3-based Dell Wyse 3020 as well as MMP2-based OLPC
XO-1.75 laptop.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-5-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/Makefile  |   2 +-
 drivers/clk/mmp/clk-pll.c | 139 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/mmp/clk.c     |  31 +++++++++++
 drivers/clk/mmp/clk.h     |  24 ++++++++
 4 files changed, 195 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/mmp/clk-pll.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index acc141adf087..14dc8a8a9d08 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -8,7 +8,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
 obj-$(CONFIG_RESET_CONTROLLER) += reset.o
 
 obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
-obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o
+obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o
 
 obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
 obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/clk/mmp/clk-pll.c b/drivers/clk/mmp/clk-pll.c
new file mode 100644
index 000000000000..7077be293871
--- /dev/null
+++ b/drivers/clk/mmp/clk-pll.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MMP PLL clock rate calculation
+ *
+ * Copyright (C) 2020 Lubomir Rintel <lkundrak@v3.sk>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include "clk.h"
+
+#define to_clk_mmp_pll(hw)	container_of(hw, struct mmp_clk_pll, hw)
+
+struct mmp_clk_pll {
+	struct clk_hw hw;
+	unsigned long default_rate;
+	void __iomem *enable_reg;
+	u32 enable;
+	void __iomem *reg;
+	u8 shift;
+
+	unsigned long input_rate;
+	void __iomem *postdiv_reg;
+	u8 postdiv_shift;
+};
+
+static int mmp_clk_pll_is_enabled(struct clk_hw *hw)
+{
+	struct mmp_clk_pll *pll = to_clk_mmp_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->enable_reg);
+	if ((val & pll->enable) == pll->enable)
+		return 1;
+
+	/* Some PLLs, if not software controlled, output default clock. */
+	if (pll->default_rate > 0)
+		return 1;
+
+	return 0;
+}
+
+static unsigned long mmp_clk_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct mmp_clk_pll *pll = to_clk_mmp_pll(hw);
+	u32 fbdiv, refdiv, postdiv;
+	u64 rate;
+	u32 val;
+
+	val = readl_relaxed(pll->enable_reg);
+	if ((val & pll->enable) != pll->enable)
+		return pll->default_rate;
+
+	if (pll->reg) {
+		val = readl_relaxed(pll->reg);
+		fbdiv = (val >> pll->shift) & 0x1ff;
+		refdiv = (val >> (pll->shift + 9)) & 0x1f;
+	} else {
+		fbdiv = 2;
+		refdiv = 1;
+	}
+
+	if (pll->postdiv_reg) {
+		/* MMP3 clock rate calculation */
+		static const u8 postdivs[] = {2, 3, 4, 5, 6, 8, 10, 12, 16};
+
+		val = readl_relaxed(pll->postdiv_reg);
+		postdiv = (val >> pll->postdiv_shift) & 0x7;
+
+		rate = pll->input_rate;
+		rate *= 2 * fbdiv;
+		do_div(rate, refdiv);
+		do_div(rate, postdivs[postdiv]);
+	} else {
+		/* MMP2 clock rate calculation */
+		if (refdiv == 3) {
+			rate = 19200000;
+		} else if (refdiv == 4) {
+			rate = 26000000;
+		} else {
+			pr_err("bad refdiv: %d (0x%08x)\n", refdiv, val);
+			return 0;
+		}
+
+		rate *= fbdiv + 2;
+		do_div(rate, refdiv + 2);
+	}
+
+	return (unsigned long)rate;
+}
+
+static const struct clk_ops mmp_clk_pll_ops = {
+	.is_enabled = mmp_clk_pll_is_enabled,
+	.recalc_rate = mmp_clk_pll_recalc_rate,
+};
+
+struct clk *mmp_clk_register_pll(char *name,
+			unsigned long default_rate,
+			void __iomem *enable_reg, u32 enable,
+			void __iomem *reg, u8 shift,
+			unsigned long input_rate,
+			void __iomem *postdiv_reg, u8 postdiv_shift)
+{
+	struct mmp_clk_pll *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &mmp_clk_pll_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+
+	pll->default_rate = default_rate;
+	pll->enable_reg = enable_reg;
+	pll->enable = enable;
+	pll->reg = reg;
+	pll->shift = shift;
+
+	pll->input_rate = input_rate;
+	pll->postdiv_reg = postdiv_reg;
+	pll->postdiv_shift = postdiv_shift;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
diff --git a/drivers/clk/mmp/clk.c b/drivers/clk/mmp/clk.c
index ca7d37e2c7be..317123641d1e 100644
--- a/drivers/clk/mmp/clk.c
+++ b/drivers/clk/mmp/clk.c
@@ -176,6 +176,37 @@ void mmp_register_div_clks(struct mmp_clk_unit *unit,
 	}
 }
 
+void mmp_register_pll_clks(struct mmp_clk_unit *unit,
+			struct mmp_param_pll_clk *clks,
+			void __iomem *base, int size)
+{
+	struct clk *clk;
+	int i;
+
+	for (i = 0; i < size; i++) {
+		void __iomem *reg = NULL;
+
+		if (clks[i].offset)
+			reg = base + clks[i].offset;
+
+		clk = mmp_clk_register_pll(clks[i].name,
+					clks[i].default_rate,
+					base + clks[i].enable_offset,
+					clks[i].enable,
+					reg, clks[i].shift,
+					clks[i].input_rate,
+					base + clks[i].postdiv_offset,
+					clks[i].postdiv_shift);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, clks[i].name);
+			continue;
+		}
+		if (clks[i].id)
+			unit->clk_table[clks[i].id] = clk;
+	}
+}
+
 void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
 			struct clk *clk)
 {
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 37d1e1d7b664..971b4d6d992f 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -221,6 +221,30 @@ void mmp_register_div_clks(struct mmp_clk_unit *unit,
 			struct mmp_param_div_clk *clks,
 			void __iomem *base, int size);
 
+struct mmp_param_pll_clk {
+	unsigned int id;
+	char *name;
+	unsigned long default_rate;
+	unsigned long enable_offset;
+	u32 enable;
+	unsigned long offset;
+	u8 shift;
+	/* MMP3 specific: */
+	unsigned long input_rate;
+	unsigned long postdiv_offset;
+	unsigned long postdiv_shift;
+};
+void mmp_register_pll_clks(struct mmp_clk_unit *unit,
+			struct mmp_param_pll_clk *clks,
+			void __iomem *base, int size);
+
+extern struct clk *mmp_clk_register_pll(char *name,
+			unsigned long default_rate,
+			void __iomem *enable_reg, u32 enable,
+			void __iomem *reg, u8 shift,
+			unsigned long input_rate,
+			void __iomem *postdiv_reg, u8 postdiv_shift);
+
 #define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc)	\
 {							\
 	.width_div = (w_d),				\
-- 
cgit v1.2.3-59-g8ed1b


From ea56ad60260ec767d9a93f71f7baabcb618eb92d Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:42 +0100
Subject: clk: mmp2: Stop pretending PLL outputs are constant

The hardcoded values for PLL1 and PLL2 are wrong. PLL1 is slightly
off -- it defaults to 797.33 MHz, not 800 MHz. PLL2 is disabled by default,
but also configurable.

Tested on a MMP2-based OLPC XO-1.75 laptop, with PLL1=797.33 and various
values of PLL2 set via set-pll2-520mhz, set-pll2-910mhz and
set-pll2-988mhz Open Firmware words.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-6-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index ee086d971416..251d8d0e78ab 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2012 Marvell
  * Chao Xie <xiechao.mail@gmail.com>
+ * Copyright (C) 2020 Lubomir Rintel <lkundrak@v3.sk>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -55,7 +56,11 @@
 #define APMU_CCIC1	0xf4
 #define APMU_USBHSIC0	0xf8
 #define APMU_USBHSIC1	0xfc
+
+#define MPMU_FCCR	0x8
+#define MPMU_POSR	0x10
 #define MPMU_UART_PLL	0x14
+#define MPMU_PLL2_CR	0x34
 
 struct mmp2_clk_unit {
 	struct mmp_clk_unit unit;
@@ -67,11 +72,14 @@ struct mmp2_clk_unit {
 static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
 	{MMP2_CLK_CLK32, "clk32", NULL, 0, 32768},
 	{MMP2_CLK_VCTCXO, "vctcxo", NULL, 0, 26000000},
-	{MMP2_CLK_PLL1, "pll1", NULL, 0, 800000000},
-	{MMP2_CLK_PLL2, "pll2", NULL, 0, 960000000},
 	{MMP2_CLK_USB_PLL, "usb_pll", NULL, 0, 480000000},
 };
 
+static struct mmp_param_pll_clk pll_clks[] = {
+	{MMP2_CLK_PLL1,   "pll1",   797330000, MPMU_FCCR,          0x4000, MPMU_POSR,     0},
+	{MMP2_CLK_PLL2,   "pll2",           0, MPMU_PLL2_CR,       0x0300, MPMU_PLL2_CR, 10},
+};
+
 static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
 	{MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
 	{MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
@@ -113,6 +121,10 @@ static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
 	mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
 					ARRAY_SIZE(fixed_rate_clks));
 
+	mmp_register_pll_clks(unit, pll_clks,
+				pxa_unit->mpmu_base,
+				ARRAY_SIZE(pll_clks));
+
 	mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
 					ARRAY_SIZE(fixed_factor_clks));
 
-- 
cgit v1.2.3-59-g8ed1b


From 391bbbd2b28e9868e36080bd0fa44dcae81707a1 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:44 +0100
Subject: clk: mmp2: Check for MMP3

The MMP3's are similar enough to MMP2, but there are differencies, such
are more clocks available on the newer model. We want to tell which
platform are we on.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-8-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 251d8d0e78ab..7594a8280b93 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -62,8 +62,14 @@
 #define MPMU_UART_PLL	0x14
 #define MPMU_PLL2_CR	0x34
 
+enum mmp2_clk_model {
+	CLK_MODEL_MMP2,
+	CLK_MODEL_MMP3,
+};
+
 struct mmp2_clk_unit {
 	struct mmp_clk_unit unit;
+	enum mmp2_clk_model model;
 	void __iomem *mpmu_base;
 	void __iomem *apmu_base;
 	void __iomem *apbc_base;
@@ -326,6 +332,11 @@ static void __init mmp2_clk_init(struct device_node *np)
 	if (!pxa_unit)
 		return;
 
+	if (of_device_is_compatible(np, "marvell,mmp3-clock"))
+		pxa_unit->model = CLK_MODEL_MMP3;
+	else
+		pxa_unit->model = CLK_MODEL_MMP2;
+
 	pxa_unit->mpmu_base = of_iomap(np, 0);
 	if (!pxa_unit->mpmu_base) {
 		pr_err("failed to map mpmu registers\n");
@@ -365,3 +376,4 @@ free_memory:
 }
 
 CLK_OF_DECLARE(mmp2_clk, "marvell,mmp2-clock", mmp2_clk_init);
+CLK_OF_DECLARE(mmp3_clk, "marvell,mmp3-clock", mmp2_clk_init);
-- 
cgit v1.2.3-59-g8ed1b


From a70812b1881566001e001dfe966ea724d889c071 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:46 +0100
Subject: clk: mmp2: Add PLLs that are available on MMP3

There are more PLLs on MMP3 and are configured slightly differently.
Tested on a MMP3-based Dell Wyse 3020 machine.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-10-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 7594a8280b93..310d77855f03 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -57,10 +57,16 @@
 #define APMU_USBHSIC0	0xf8
 #define APMU_USBHSIC1	0xfc
 
-#define MPMU_FCCR	0x8
-#define MPMU_POSR	0x10
-#define MPMU_UART_PLL	0x14
-#define MPMU_PLL2_CR	0x34
+#define MPMU_FCCR		0x8
+#define MPMU_POSR		0x10
+#define MPMU_UART_PLL		0x14
+#define MPMU_PLL2_CR		0x34
+/* MMP3 specific below */
+#define MPMU_PLL3_CR		0x50
+#define MPMU_PLL3_CTRL1		0x58
+#define MPMU_PLL1_CTRL		0x5c
+#define MPMU_PLL_DIFF_CTRL	0x68
+#define MPMU_PLL2_CTRL1		0x414
 
 enum mmp2_clk_model {
 	CLK_MODEL_MMP2,
@@ -86,6 +92,14 @@ static struct mmp_param_pll_clk pll_clks[] = {
 	{MMP2_CLK_PLL2,   "pll2",           0, MPMU_PLL2_CR,       0x0300, MPMU_PLL2_CR, 10},
 };
 
+static struct mmp_param_pll_clk mmp3_pll_clks[] = {
+	{MMP2_CLK_PLL2,   "pll1",   797330000, MPMU_FCCR,          0x4000, MPMU_POSR,     0,      26000000, MPMU_PLL1_CTRL,      25},
+	{MMP2_CLK_PLL2,   "pll2",           0, MPMU_PLL2_CR,       0x0300, MPMU_PLL2_CR, 10,      26000000, MPMU_PLL2_CTRL1,     25},
+	{MMP3_CLK_PLL1_P, "pll1_p",         0, MPMU_PLL_DIFF_CTRL, 0x0010, 0,             0,     797330000, MPMU_PLL_DIFF_CTRL,   0},
+	{MMP3_CLK_PLL2_P, "pll2_p",         0, MPMU_PLL_DIFF_CTRL, 0x0100, MPMU_PLL2_CR, 10,      26000000, MPMU_PLL_DIFF_CTRL,   5},
+	{MMP3_CLK_PLL3,   "pll3",           0, MPMU_PLL3_CR,       0x0300, MPMU_PLL3_CR, 10,      26000000, MPMU_PLL3_CTRL1,     25},
+};
+
 static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
 	{MMP2_CLK_PLL1_2, "pll1_2", "pll1", 1, 2, 0},
 	{MMP2_CLK_PLL1_4, "pll1_4", "pll1_2", 1, 2, 0},
@@ -127,9 +141,15 @@ static void mmp2_pll_init(struct mmp2_clk_unit *pxa_unit)
 	mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
 					ARRAY_SIZE(fixed_rate_clks));
 
-	mmp_register_pll_clks(unit, pll_clks,
-				pxa_unit->mpmu_base,
-				ARRAY_SIZE(pll_clks));
+	if (pxa_unit->model == CLK_MODEL_MMP3) {
+		mmp_register_pll_clks(unit, mmp3_pll_clks,
+					pxa_unit->mpmu_base,
+					ARRAY_SIZE(mmp3_pll_clks));
+	} else {
+		mmp_register_pll_clks(unit, pll_clks,
+					pxa_unit->mpmu_base,
+					ARRAY_SIZE(pll_clks));
+	}
 
 	mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
 					ARRAY_SIZE(fixed_factor_clks));
-- 
cgit v1.2.3-59-g8ed1b


From bfa851b60c8a41d2c419b3846f74928bc31d7ad9 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:49 +0100
Subject: clk: mmp2: add the GPU clocks

MMP2 has a single GC860 core while MMP3 has a GC2000 and a GC300.
On both platforms there's an AXI bus interface clock that's common for
all GPUs and each GPU core has a separate clock.

Meaning of the relevant APMU_GPU bits were gotten from James Cameron's
message and [1], the OLPC OS kernel source [2] and Marvell's MMP3 tree.

[1] http://lists.laptop.org/pipermail/devel/2019-April/039053.html
[2] http://dev.laptop.org/git/olpc-kernel/commit/arch/arm/mach-mmp/mmp2.c?h=arm-3.0-wip&id=8ce9f6122

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-13-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 61 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 310d77855f03..208c67df482a 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -56,6 +56,7 @@
 #define APMU_CCIC1	0xf4
 #define APMU_USBHSIC0	0xf8
 #define APMU_USBHSIC1	0xfc
+#define APMU_GPU	0xcc
 
 #define MPMU_FCCR		0x8
 #define MPMU_POSR		0x10
@@ -245,6 +246,14 @@ static DEFINE_SPINLOCK(ccic0_lock);
 static DEFINE_SPINLOCK(ccic1_lock);
 static const char * const ccic_parent_names[] = {"pll1_2", "pll1_16", "vctcxo"};
 
+static DEFINE_SPINLOCK(gpu_lock);
+static const char * const mmp2_gpu_gc_parent_names[] =  {"pll1_2", "pll1_3", "pll2_2", "pll2_3", "pll2", "usb_pll"};
+static u32 mmp2_gpu_gc_parent_table[] =          { 0x0000,   0x0040,   0x0080,   0x00c0,   0x1000, 0x1040   };
+static const char * const mmp2_gpu_bus_parent_names[] = {"pll1_4", "pll2",   "pll2_2", "usb_pll"};
+static u32 mmp2_gpu_bus_parent_table[] =         { 0x0000,   0x0020,   0x0030,   0x4020   };
+static const char * const mmp3_gpu_bus_parent_names[] = {"pll1_4", "pll1_6", "pll1_2", "pll2_2"};
+static const char * const mmp3_gpu_gc_parent_names[] =  {"pll1",   "pll2",   "pll1_p", "pll2_p"};
+
 static struct mmp_clk_mix_config ccic0_mix_config = {
 	.reg_info = DEFINE_MIX_REG_INFO(4, 17, 2, 6, 32),
 };
@@ -257,6 +266,15 @@ static struct mmp_param_mux_clk apmu_mux_clks[] = {
 	{MMP2_CLK_DISP1_MUX, "disp1_mux", disp_parent_names, ARRAY_SIZE(disp_parent_names), CLK_SET_RATE_PARENT, APMU_DISP1, 6, 2, 0, &disp1_lock},
 };
 
+static struct mmp_param_mux_clk mmp3_apmu_mux_clks[] = {
+	{0, "gpu_bus_mux", mmp3_gpu_bus_parent_names, ARRAY_SIZE(mmp3_gpu_bus_parent_names),
+									CLK_SET_RATE_PARENT, APMU_GPU, 4, 2, 0, &gpu_lock},
+	{0, "gpu_3d_mux", mmp3_gpu_gc_parent_names, ARRAY_SIZE(mmp3_gpu_gc_parent_names),
+									CLK_SET_RATE_PARENT, APMU_GPU, 6, 2, 0, &gpu_lock},
+	{0, "gpu_2d_mux", mmp3_gpu_gc_parent_names, ARRAY_SIZE(mmp3_gpu_gc_parent_names),
+									CLK_SET_RATE_PARENT, APMU_GPU, 12, 2, 0, &gpu_lock},
+};
+
 static struct mmp_param_div_clk apmu_div_clks[] = {
 	{0, "disp0_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 8, 4, 0, &disp0_lock},
 	{0, "disp0_sphy_div", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 15, 5, 0, &disp0_lock},
@@ -265,6 +283,11 @@ static struct mmp_param_div_clk apmu_div_clks[] = {
 	{0, "ccic1_sphy_div", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 10, 5, 0, &ccic1_lock},
 };
 
+static struct mmp_param_div_clk mmp3_apmu_div_clks[] = {
+	{0, "gpu_3d_div", "gpu_3d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 24, 4, 0, &gpu_lock},
+	{0, "gpu_2d_div", "gpu_2d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 28, 4, 0, &gpu_lock},
+};
+
 static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_USB, "usb_clk", "usb_pll", 0, APMU_USB, 0x9, 0x9, 0x0, 0, &usb_lock},
 	{MMP2_CLK_USBHSIC0, "usbhsic0_clk", "usb_pll", 0, APMU_USBHSIC0, 0x1b, 0x1b, 0x0, 0, &usbhsic0_lock},
@@ -285,6 +308,16 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_CCIC1, "ccic1_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x1b, 0x1b, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_PHY, "ccic1_phy_clk", "ccic1_mix_clk", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x24, 0x24, 0x0, 0, &ccic1_lock},
 	{MMP2_CLK_CCIC1_SPHY, "ccic1_sphy_clk", "ccic1_sphy_div", CLK_SET_RATE_PARENT, APMU_CCIC1, 0x300, 0x300, 0x0, 0, &ccic1_lock},
+	{MMP2_CLK_GPU_BUS, "gpu_bus_clk", "gpu_bus_mux", CLK_SET_RATE_PARENT, APMU_GPU, 0xa, 0xa, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
+};
+
+static struct mmp_param_gate_clk mmp2_apmu_gate_clks[] = {
+	{MMP2_CLK_GPU_3D, "gpu_3d_clk", "gpu_3d_mux", CLK_SET_RATE_PARENT, APMU_GPU, 0x5, 0x5, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
+};
+
+static struct mmp_param_gate_clk mmp3_apmu_gate_clks[] = {
+	{MMP3_CLK_GPU_3D, "gpu_3d_clk", "gpu_3d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x5, 0x5, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
+	{MMP3_CLK_GPU_2D, "gpu_2d_clk", "gpu_2d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x1c0000, 0x1c0000, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
 };
 
 static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
@@ -320,6 +353,34 @@ static void mmp2_axi_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
 
 	mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
 				ARRAY_SIZE(apmu_gate_clks));
+
+	if (pxa_unit->model == CLK_MODEL_MMP3) {
+		mmp_register_mux_clks(unit, mmp3_apmu_mux_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp3_apmu_mux_clks));
+
+		mmp_register_div_clks(unit, mmp3_apmu_div_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp3_apmu_div_clks));
+
+		mmp_register_gate_clks(unit, mmp3_apmu_gate_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp3_apmu_gate_clks));
+	} else {
+		clk_register_mux_table(NULL, "gpu_3d_mux", mmp2_gpu_gc_parent_names,
+					ARRAY_SIZE(mmp2_gpu_gc_parent_names),
+					CLK_SET_RATE_PARENT,
+					pxa_unit->apmu_base + APMU_GPU,
+					0, 0x10c0, 0,
+					mmp2_gpu_gc_parent_table, &gpu_lock);
+
+		clk_register_mux_table(NULL, "gpu_bus_mux", mmp2_gpu_bus_parent_names,
+					ARRAY_SIZE(mmp2_gpu_bus_parent_names),
+					CLK_SET_RATE_PARENT,
+					pxa_unit->apmu_base + APMU_GPU,
+					0, 0x4030, 0,
+					mmp2_gpu_bus_parent_table, &gpu_lock);
+
+		mmp_register_gate_clks(unit, mmp2_apmu_gate_clks, pxa_unit->apmu_base,
+					ARRAY_SIZE(mmp2_apmu_gate_clks));
+	}
 }
 
 static void mmp2_clk_reset_init(struct device_node *np,
-- 
cgit v1.2.3-59-g8ed1b


From 82d59c382c230fb26fe193c9e1b5239d8fcb2d77 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:51 +0100
Subject: clk: mmp2: Add clocks for the thermal sensors

The register definitions gotten from OLPC Open Firmware.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-15-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 208c67df482a..0057a53905d8 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -54,6 +54,10 @@
 #define APMU_DISP1	0x110
 #define APMU_CCIC0	0x50
 #define APMU_CCIC1	0xf4
+#define APBC_THERMAL0	0x90
+#define APBC_THERMAL1	0x98
+#define APBC_THERMAL2	0x9c
+#define APBC_THERMAL3	0xa0
 #define APMU_USBHSIC0	0xf8
 #define APMU_USBHSIC1	0xfc
 #define APMU_GPU	0xcc
@@ -215,6 +219,13 @@ static struct mmp_param_gate_clk apbc_gate_clks[] = {
 	{MMP2_CLK_SSP2, "ssp2_clk", "ssp2_mux", CLK_SET_RATE_PARENT, APBC_SSP2, 0x7, 0x3, 0x0, 0, &ssp2_lock},
 	{MMP2_CLK_SSP3, "ssp3_clk", "ssp3_mux", CLK_SET_RATE_PARENT, APBC_SSP3, 0x7, 0x3, 0x0, 0, &ssp3_lock},
 	{MMP2_CLK_TIMER, "timer_clk", "timer_mux", CLK_SET_RATE_PARENT, APBC_TIMER, 0x7, 0x3, 0x0, 0, &timer_lock},
+	{MMP2_CLK_THERMAL0, "thermal0_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL0, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+};
+
+static struct mmp_param_gate_clk mmp3_apbc_gate_clks[] = {
+	{MMP3_CLK_THERMAL1, "thermal1_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL1, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+	{MMP3_CLK_THERMAL2, "thermal2_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL2, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
+	{MMP3_CLK_THERMAL3, "thermal3_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_THERMAL3, 0x7, 0x3, 0x0, MMP_CLK_GATE_NEED_DELAY, &reset_lock},
 };
 
 static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
@@ -226,6 +237,11 @@ static void mmp2_apb_periph_clk_init(struct mmp2_clk_unit *pxa_unit)
 
 	mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
 				ARRAY_SIZE(apbc_gate_clks));
+
+	if (pxa_unit->model == CLK_MODEL_MMP3) {
+		mmp_register_gate_clks(unit, mmp3_apbc_gate_clks, pxa_unit->apbc_base,
+					ARRAY_SIZE(mmp3_apbc_gate_clks));
+	}
 }
 
 static DEFINE_SPINLOCK(sdh_lock);
-- 
cgit v1.2.3-59-g8ed1b


From 54198276badf2cd74f799ec61b0e0afcd958efdb Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:53 +0100
Subject: clk: mmp2: Add clock for fifth SD HCI on MMP3

There's one extra SDHCI on MMP3, used by the internal SD card on OLPC
XO-4. Add a clock for it.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-17-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 0057a53905d8..8769860fab64 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -49,6 +49,7 @@
 #define APMU_SDH1	0x58
 #define APMU_SDH2	0xe8
 #define APMU_SDH3	0xec
+#define APMU_SDH4	0x15c
 #define APMU_USB	0x5c
 #define APMU_DISP0	0x4c
 #define APMU_DISP1	0x110
@@ -332,6 +333,7 @@ static struct mmp_param_gate_clk mmp2_apmu_gate_clks[] = {
 };
 
 static struct mmp_param_gate_clk mmp3_apmu_gate_clks[] = {
+	{MMP3_CLK_SDH4, "sdh4_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH4, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP3_CLK_GPU_3D, "gpu_3d_clk", "gpu_3d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x5, 0x5, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
 	{MMP3_CLK_GPU_2D, "gpu_2d_clk", "gpu_2d_div", CLK_SET_RATE_PARENT, APMU_GPU, 0x1c0000, 0x1c0000, 0x0, MMP_CLK_GATE_NEED_DELAY, &gpu_lock},
 };
-- 
cgit v1.2.3-59-g8ed1b


From de17be999cb07effacf6a1129602f63396f5af27 Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Mon, 9 Mar 2020 20:42:54 +0100
Subject: clk: mmp2: Fix bit masks for LCDC I/O and pixel clocks

They were reversed because I read the datasheet upside down.
Actually there is no datasheet, but I ended up understanding the
comments in Open Firmware driver wrong.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20200309194254.29009-18-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 8769860fab64..52dc8b43acd9 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -314,8 +314,8 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	{MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH2, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH3, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
-	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock},
-	{MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock},
+	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x12, 0x12, 0x0, 0, &disp0_lock},
+	{MMP2_CLK_DISP0_LCDC, "disp0_lcdc_clk", "disp0_mux", CLK_SET_RATE_PARENT, APMU_DISP0, 0x09, 0x09, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x09, 0x09, 0x0, 0, &disp1_lock},
 	{MMP2_CLK_CCIC_ARBITER, "ccic_arbiter", "vctcxo", CLK_SET_RATE_PARENT, APMU_CCIC0, 0x1800, 0x1800, 0x0, 0, &ccic0_lock},
-- 
cgit v1.2.3-59-g8ed1b


From 187e5cd2d133771e978e7e4ea6aa684dfd1ce6ab Mon Sep 17 00:00:00 2001
From: Xiaolong Zhang <xiaolong.zhang@unisoc.com>
Date: Wed, 4 Mar 2020 15:27:24 +0800
Subject: clk: sprd: add gate for pll clocks

Some sprd's gate clocks are used to the switch of pll, which
need to wait a certain time for stable after being enabled.

Signed-off-by: Xiaolong Zhang <xiaolong.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200304072730.9193-2-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/sprd/gate.c | 17 +++++++++++++++++
 drivers/clk/sprd/gate.h | 21 +++++++++++++++++++--
 2 files changed, 36 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sprd/gate.c b/drivers/clk/sprd/gate.c
index f59d1936b412..574cfc116bbc 100644
--- a/drivers/clk/sprd/gate.c
+++ b/drivers/clk/sprd/gate.c
@@ -79,6 +79,17 @@ static int sprd_sc_gate_enable(struct clk_hw *hw)
 
 	return 0;
 }
+
+static int sprd_pll_sc_gate_prepare(struct clk_hw *hw)
+{
+	struct sprd_gate *sg = hw_to_sprd_gate(hw);
+
+	clk_sc_gate_toggle(sg, true);
+	udelay(sg->udelay);
+
+	return 0;
+}
+
 static int sprd_gate_is_enabled(struct clk_hw *hw)
 {
 	struct sprd_gate *sg = hw_to_sprd_gate(hw);
@@ -109,3 +120,9 @@ const struct clk_ops sprd_sc_gate_ops = {
 };
 EXPORT_SYMBOL_GPL(sprd_sc_gate_ops);
 
+const struct clk_ops sprd_pll_sc_gate_ops = {
+	.unprepare	= sprd_sc_gate_disable,
+	.prepare	= sprd_pll_sc_gate_prepare,
+	.is_enabled	= sprd_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(sprd_pll_sc_gate_ops);
diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
index dc352ea55e1f..d380d77b8dce 100644
--- a/drivers/clk/sprd/gate.h
+++ b/drivers/clk/sprd/gate.h
@@ -14,16 +14,19 @@ struct sprd_gate {
 	u32			enable_mask;
 	u16			flags;
 	u16			sc_offset;
+	u16			udelay;
 
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
-			     _enable_mask, _flags, _gate_flags, _ops)	\
+#define SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops)		\
 	struct sprd_gate _struct = {					\
 		.enable_mask	= _enable_mask,				\
 		.sc_offset	= _sc_offset,				\
 		.flags		= _gate_flags,				\
+		.udelay		= _udelay,				\
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
@@ -34,6 +37,12 @@ struct sprd_gate {
 		}							\
 	}
 
+#define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
+			     _enable_mask, _flags, _gate_flags, _ops)	\
+	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, 0, _ops)
+
 #define SPRD_GATE_CLK(_struct, _name, _parent, _reg,			\
 		      _enable_mask, _flags, _gate_flags)		\
 	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, 0,		\
@@ -46,6 +55,13 @@ struct sprd_gate {
 			     _enable_mask, _flags, _gate_flags,		\
 			     &sprd_sc_gate_ops)
 
+#define SPRD_PLL_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
+			    _enable_mask, _flags, _gate_flags, _udelay)	\
+	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset,	_enable_mask, _flags,	\
+				    _gate_flags, _udelay,		\
+				    &sprd_pll_sc_gate_ops)
+
 static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
@@ -55,5 +71,6 @@ static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
 
 extern const struct clk_ops sprd_gate_ops;
 extern const struct clk_ops sprd_sc_gate_ops;
+extern const struct clk_ops sprd_pll_sc_gate_ops;
 
 #endif /* _SPRD_GATE_H_ */
-- 
cgit v1.2.3-59-g8ed1b


From ea8ca3109dd4dc14c4a8813b8c4a6d8d011836c4 Mon Sep 17 00:00:00 2001
From: Chunyan Zhang <chunyan.zhang@unisoc.com>
Date: Wed, 4 Mar 2020 15:27:28 +0800
Subject: clk: sprd: Add macros for referencing parents without strings

With the new clk parenting code, clk_init_data was expanded to include
.parent_hws and .parent_data, for clk drivers to specify parents without
name strings of clocks.

Also some macros were added for using these two items to reference
clock parents. Based on that to expand macros for sprd clocks:

- SPRD_*_DATA, take an array of struct clk_parent_data * as its parents
  which should be a combination of .fw_name (devicetree clock-names),
  .hw (pointers to a local struct clk_hw).

- SPRD_*_HW, take a local struct clk_hw pointer, instead of a string, as
  its parent.

- SPRD_*_FW_NAME, take a string of clock-names decleared in the device
  tree as the clock parent.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200304072730.9193-6-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/sprd/composite.h |  39 +++++++++++-----
 drivers/clk/sprd/div.h       |  20 +++++---
 drivers/clk/sprd/gate.h      | 109 +++++++++++++++++++++++++++++++++++++------
 drivers/clk/sprd/mux.h       |  28 ++++++++---
 drivers/clk/sprd/pll.h       |  55 +++++++++++++++-------
 5 files changed, 196 insertions(+), 55 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sprd/composite.h b/drivers/clk/sprd/composite.h
index 04ab3f587ee2..adbabbe596b7 100644
--- a/drivers/clk/sprd/composite.h
+++ b/drivers/clk/sprd/composite.h
@@ -18,26 +18,43 @@ struct sprd_comp {
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, _table,	\
-			_mshift, _mwidth, _dshift, _dwidth, _flags)	\
+#define SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags, _fn)				\
 	struct sprd_comp _struct = {					\
 		.mux	= _SPRD_MUX_CLK(_mshift, _mwidth, _table),	\
 		.div	= _SPRD_DIV_CLK(_dshift, _dwidth),		\
 		.common = {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init = CLK_HW_INIT_PARENTS(_name,		\
-						       _parent,		\
-						       &sprd_comp_ops,	\
-						       _flags),		\
+			.hw.init = _fn(_name, _parent,			\
+				       &sprd_comp_ops, _flags),		\
 			 }						\
 	}
 
-#define SPRD_COMP_CLK(_struct, _name, _parent, _reg, _mshift,	\
-			_mwidth, _dshift, _dwidth, _flags)	\
-	SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg,	\
-			    NULL, _mshift, _mwidth,		\
-			    _dshift, _dwidth, _flags)
+#define SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, _table,	\
+			    _mshift, _mwidth, _dshift, _dwidth, _flags)	\
+	SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags, CLK_HW_INIT_PARENTS)
+
+#define SPRD_COMP_CLK(_struct, _name, _parent, _reg, _mshift,		\
+		      _mwidth, _dshift, _dwidth, _flags)		\
+	SPRD_COMP_CLK_TABLE(_struct, _name, _parent, _reg, NULL,	\
+			    _mshift, _mwidth, _dshift, _dwidth, _flags)
+
+#define SPRD_COMP_CLK_DATA_TABLE(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift,		\
+				 _dwidth, _flags)			\
+	SPRD_COMP_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, _table,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags, CLK_HW_INIT_PARENTS_DATA)
+
+#define SPRD_COMP_CLK_DATA(_struct, _name, _parent, _reg, _mshift,	\
+			   _mwidth, _dshift, _dwidth, _flags)		\
+	SPRD_COMP_CLK_DATA_TABLE(_struct, _name, _parent, _reg,	NULL,	\
+				 _mshift, _mwidth, _dshift, _dwidth,	\
+				 _flags)
 
 static inline struct sprd_comp *hw_to_sprd_comp(const struct clk_hw *hw)
 {
diff --git a/drivers/clk/sprd/div.h b/drivers/clk/sprd/div.h
index 87510e3d0e14..6acfe6b179fc 100644
--- a/drivers/clk/sprd/div.h
+++ b/drivers/clk/sprd/div.h
@@ -35,20 +35,28 @@ struct sprd_div {
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_DIV_CLK(_struct, _name, _parent, _reg,			\
-			_shift, _width, _flags)				\
+#define SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,		\
+				_shift, _width, _flags, _fn)		\
 	struct sprd_div _struct = {					\
 		.div	= _SPRD_DIV_CLK(_shift, _width),		\
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init	= CLK_HW_INIT(_name,		\
-						      _parent,		\
-						      &sprd_div_ops,	\
-						      _flags),		\
+			.hw.init	= _fn(_name, _parent,		\
+					      &sprd_div_ops, _flags),	\
 		}							\
 	}
 
+#define SPRD_DIV_CLK(_struct, _name, _parent, _reg,			\
+		     _shift, _width, _flags)				\
+	SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,		\
+				_shift, _width, _flags, CLK_HW_INIT)
+
+#define SPRD_DIV_CLK_HW(_struct, _name, _parent, _reg,			\
+			_shift, _width, _flags)				\
+	SPRD_DIV_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,		\
+				_shift, _width, _flags, CLK_HW_INIT_HW)
+
 static inline struct sprd_div *hw_to_sprd_div(const struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
index d380d77b8dce..b55817869367 100644
--- a/drivers/clk/sprd/gate.h
+++ b/drivers/clk/sprd/gate.h
@@ -19,9 +19,9 @@ struct sprd_gate {
 	struct sprd_clk_common	common;
 };
 
-#define SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+#define SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
 				    _sc_offset, _enable_mask, _flags,	\
-				    _gate_flags, _udelay, _ops)		\
+				    _gate_flags, _udelay, _ops, _fn)	\
 	struct sprd_gate _struct = {					\
 		.enable_mask	= _enable_mask,				\
 		.sc_offset	= _sc_offset,				\
@@ -30,38 +30,121 @@ struct sprd_gate {
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init	= CLK_HW_INIT(_name,		\
-						      _parent,		\
-						      _ops,		\
-						      _flags),		\
+			.hw.init	= _fn(_name, _parent,		\
+					      _ops, _flags),		\
 		}							\
 	}
 
+#define SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops)		\
+	SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops, CLK_HW_INIT)
+
 #define SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
 			     _enable_mask, _flags, _gate_flags, _ops)	\
 	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
 				    _sc_offset, _enable_mask, _flags,	\
 				    _gate_flags, 0, _ops)
 
-#define SPRD_GATE_CLK(_struct, _name, _parent, _reg,			\
-		      _enable_mask, _flags, _gate_flags)		\
-	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, 0,		\
-			     _enable_mask, _flags, _gate_flags,		\
-			     &sprd_gate_ops)
-
 #define SPRD_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
 			 _enable_mask, _flags, _gate_flags)		\
 	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, _sc_offset,	\
 			     _enable_mask, _flags, _gate_flags,		\
 			     &sprd_sc_gate_ops)
 
+#define SPRD_GATE_CLK(_struct, _name, _parent, _reg,			\
+		      _enable_mask, _flags, _gate_flags)		\
+	SPRD_SC_GATE_CLK_OPS(_struct, _name, _parent, _reg, 0,		\
+			     _enable_mask, _flags, _gate_flags,		\
+			     &sprd_gate_ops)
+
 #define SPRD_PLL_SC_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset,	\
-			    _enable_mask, _flags, _gate_flags, _udelay)	\
+			     _enable_mask, _flags, _gate_flags,		\
+			     _udelay)					\
 	SPRD_SC_GATE_CLK_OPS_UDELAY(_struct, _name, _parent, _reg,	\
 				    _sc_offset,	_enable_mask, _flags,	\
 				    _gate_flags, _udelay,		\
 				    &sprd_pll_sc_gate_ops)
 
+
+#define SPRD_SC_GATE_CLK_HW_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				       _sc_offset, _enable_mask,	\
+				       _flags, _gate_flags,		\
+				       _udelay, _ops)			\
+	SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops,		\
+				    CLK_HW_INIT_HW)
+
+#define SPRD_SC_GATE_CLK_HW_OPS(_struct, _name, _parent, _reg,		\
+				_sc_offset, _enable_mask, _flags,	\
+				_gate_flags, _ops)			\
+	SPRD_SC_GATE_CLK_HW_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				       _sc_offset, _enable_mask,	\
+				       _flags, _gate_flags, 0, _ops)
+
+#define SPRD_SC_GATE_CLK_HW(_struct, _name, _parent, _reg,		\
+			    _sc_offset, _enable_mask, _flags,		\
+			    _gate_flags)				\
+	SPRD_SC_GATE_CLK_HW_OPS(_struct, _name, _parent, _reg,		\
+				_sc_offset, _enable_mask, _flags,	\
+				_gate_flags, &sprd_sc_gate_ops)
+
+#define SPRD_GATE_CLK_HW(_struct, _name, _parent, _reg,			\
+			 _enable_mask, _flags, _gate_flags)		\
+	SPRD_SC_GATE_CLK_HW_OPS(_struct, _name, _parent, _reg, 0,	\
+				_enable_mask, _flags, _gate_flags,	\
+				&sprd_gate_ops)
+
+#define SPRD_PLL_SC_GATE_CLK_HW(_struct, _name, _parent, _reg,		\
+				_sc_offset, _enable_mask, _flags,	\
+				_gate_flags, _udelay)			\
+	SPRD_SC_GATE_CLK_HW_OPS_UDELAY(_struct, _name, _parent, _reg,	\
+				       _sc_offset, _enable_mask,	\
+				       _flags, _gate_flags, _udelay,	\
+				       &sprd_pll_sc_gate_ops)
+
+#define SPRD_SC_GATE_CLK_FW_NAME_OPS_UDELAY(_struct, _name, _parent,	\
+					    _reg, _sc_offset,		\
+					    _enable_mask, _flags,	\
+					    _gate_flags, _udelay, _ops)	\
+	SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+				    _sc_offset, _enable_mask, _flags,	\
+				    _gate_flags, _udelay, _ops,		\
+				    CLK_HW_INIT_FW_NAME)
+
+#define SPRD_SC_GATE_CLK_FW_NAME_OPS(_struct, _name, _parent, _reg,	\
+				     _sc_offset, _enable_mask, _flags,	\
+				     _gate_flags, _ops)			\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS_UDELAY(_struct, _name, _parent,	\
+					    _reg, _sc_offset,		\
+					    _enable_mask, _flags,	\
+					    _gate_flags, 0, _ops)
+
+#define SPRD_SC_GATE_CLK_FW_NAME(_struct, _name, _parent, _reg,		\
+				 _sc_offset, _enable_mask, _flags,	\
+				 _gate_flags)				\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS(_struct, _name, _parent, _reg,	\
+				     _sc_offset, _enable_mask, _flags,	\
+				     _gate_flags, &sprd_sc_gate_ops)
+
+#define SPRD_GATE_CLK_FW_NAME(_struct, _name, _parent, _reg,		\
+			      _enable_mask, _flags, _gate_flags)	\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS(_struct, _name, _parent, _reg, 0,	\
+				     _enable_mask, _flags, _gate_flags,	\
+				     &sprd_gate_ops)
+
+#define SPRD_PLL_SC_GATE_CLK_FW_NAME(_struct, _name, _parent, _reg,	\
+				     _sc_offset, _enable_mask, _flags,	\
+				     _gate_flags, _udelay)		\
+	SPRD_SC_GATE_CLK_FW_NAME_OPS_UDELAY(_struct, _name, _parent,	\
+					    _reg, _sc_offset,		\
+					    _enable_mask, _flags,	\
+					    _gate_flags, _udelay,	\
+					    &sprd_pll_sc_gate_ops)
+
 static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
diff --git a/drivers/clk/sprd/mux.h b/drivers/clk/sprd/mux.h
index 892e4191cc7f..f3cc31dae06f 100644
--- a/drivers/clk/sprd/mux.h
+++ b/drivers/clk/sprd/mux.h
@@ -36,26 +36,40 @@ struct sprd_mux {
 		.table	= _table,			\
 	}
 
-#define SPRD_MUX_CLK_TABLE(_struct, _name, _parents, _table,		\
-				     _reg, _shift, _width,		\
-				     _flags)				\
+#define SPRD_MUX_CLK_HW_INIT_FN(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags, _fn)	\
 	struct sprd_mux _struct = {					\
 		.mux	= _SPRD_MUX_CLK(_shift, _width, _table),	\
 		.common	= {						\
 			.regmap		= NULL,				\
 			.reg		= _reg,				\
-			.hw.init = CLK_HW_INIT_PARENTS(_name,		\
-						       _parents,	\
-						       &sprd_mux_ops,	\
-						       _flags),		\
+			.hw.init = _fn(_name, _parents,			\
+				       &sprd_mux_ops, _flags),		\
 		}							\
 	}
 
+#define SPRD_MUX_CLK_TABLE(_struct, _name, _parents, _table,		\
+			   _reg, _shift, _width, _flags)		\
+	SPRD_MUX_CLK_HW_INIT_FN(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags,		\
+				CLK_HW_INIT_PARENTS)
+
 #define SPRD_MUX_CLK(_struct, _name, _parents, _reg,		\
 		     _shift, _width, _flags)			\
 	SPRD_MUX_CLK_TABLE(_struct, _name, _parents, NULL,	\
 			   _reg, _shift, _width, _flags)
 
+#define SPRD_MUX_CLK_DATA_TABLE(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags)		\
+	SPRD_MUX_CLK_HW_INIT_FN(_struct, _name, _parents, _table,	\
+				_reg, _shift, _width, _flags,		\
+				CLK_HW_INIT_PARENTS_DATA)
+
+#define SPRD_MUX_CLK_DATA(_struct, _name, _parents, _reg,		\
+			  _shift, _width, _flags)			\
+	SPRD_MUX_CLK_DATA_TABLE(_struct, _name, _parents, NULL,		\
+				_reg, _shift, _width, _flags)
+
 static inline struct sprd_mux *hw_to_sprd_mux(const struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
diff --git a/drivers/clk/sprd/pll.h b/drivers/clk/sprd/pll.h
index e95f11e91ffe..6558f50d0296 100644
--- a/drivers/clk/sprd/pll.h
+++ b/drivers/clk/sprd/pll.h
@@ -61,27 +61,33 @@ struct sprd_pll {
 	struct sprd_clk_common	common;
 };
 
+#define SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg,	\
+			    _regs_num, _itable, _factors,	\
+			    _udelay, _k1, _k2, _fflag,		\
+			    _fvco, _fn)				\
+	struct sprd_pll _struct = {				\
+		.regs_num	= _regs_num,			\
+		.itable		= _itable,			\
+		.factors	= _factors,			\
+		.udelay		= _udelay,			\
+		.k1		= _k1,				\
+		.k2		= _k2,				\
+		.fflag		= _fflag,			\
+		.fvco		= _fvco,			\
+		.common		= {				\
+			.regmap		= NULL,			\
+			.reg		= _reg,			\
+			.hw.init	= _fn(_name, _parent,	\
+					      &sprd_pll_ops, 0),\
+		},						\
+	}
+
 #define SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg,	\
 				    _regs_num, _itable, _factors,	\
 				    _udelay, _k1, _k2, _fflag, _fvco)	\
-	struct sprd_pll _struct = {					\
-		.regs_num	= _regs_num,				\
-		.itable		= _itable,				\
-		.factors	= _factors,				\
-		.udelay		= _udelay,				\
-		.k1		= _k1,					\
-		.k2		= _k2,					\
-		.fflag		= _fflag,				\
-		.fvco		= _fvco,				\
-		.common		= {					\
-			.regmap		= NULL,				\
-			.reg		= _reg,				\
-			.hw.init	= CLK_HW_INIT(_name,		\
-						      _parent,		\
-						      &sprd_pll_ops,	\
-						      0),		\
-		},							\
-	}
+	SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg, _regs_num,	\
+			    _itable, _factors, _udelay, _k1, _k2,	\
+			    _fflag, _fvco, CLK_HW_INIT)
 
 #define SPRD_PLL_WITH_ITABLE_K(_struct, _name, _parent, _reg,		\
 			       _regs_num, _itable, _factors,		\
@@ -96,6 +102,19 @@ struct sprd_pll {
 				    _regs_num, _itable, _factors,	\
 				    _udelay, 1000, 1000, 0, 0)
 
+#define SPRD_PLL_FW_NAME(_struct, _name, _parent, _reg, _regs_num,	\
+			 _itable, _factors, _udelay, _k1, _k2,		\
+			 _fflag, _fvco)					\
+	SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg, _regs_num,	\
+			    _itable, _factors, _udelay, _k1, _k2,	\
+			    _fflag, _fvco, CLK_HW_INIT_FW_NAME)
+
+#define SPRD_PLL_HW(_struct, _name, _parent, _reg, _regs_num, _itable,	\
+		    _factors, _udelay, _k1, _k2, _fflag, _fvco)		\
+	SPRD_PLL_HW_INIT_FN(_struct, _name, _parent, _reg, _regs_num,	\
+			    _itable, _factors, _udelay, _k1, _k2,	\
+			    _fflag, _fvco, CLK_HW_INIT_HW)
+
 static inline struct sprd_pll *hw_to_sprd_pll(struct clk_hw *hw)
 {
 	struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
-- 
cgit v1.2.3-59-g8ed1b


From f95e8c7923d1b65b892f7052f66f8588b08f65b3 Mon Sep 17 00:00:00 2001
From: Chunyan Zhang <chunyan.zhang@unisoc.com>
Date: Wed, 4 Mar 2020 15:27:29 +0800
Subject: clk: sprd: support to get regmap from parent node

Some SC9863a clock nodes would be the child of a syscon node, clocks can
use the regmap of syscon device directly for this kind of cases.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200304072730.9193-7-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/sprd/common.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sprd/common.c b/drivers/clk/sprd/common.c
index c0af4779892b..d620bbbcdfc8 100644
--- a/drivers/clk/sprd/common.c
+++ b/drivers/clk/sprd/common.c
@@ -40,7 +40,8 @@ int sprd_clk_regmap_init(struct platform_device *pdev,
 			 const struct sprd_clk_desc *desc)
 {
 	void __iomem *base;
-	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
 	struct regmap *regmap;
 
 	if (of_find_property(node, "sprd,syscon", NULL)) {
@@ -49,6 +50,13 @@ int sprd_clk_regmap_init(struct platform_device *pdev,
 			pr_err("%s: failed to get syscon regmap\n", __func__);
 			return PTR_ERR(regmap);
 		}
+	} else if (of_device_is_compatible(of_get_parent(dev->of_node),
+			   "syscon")) {
+		regmap = device_node_to_regmap(of_get_parent(dev->of_node));
+		if (IS_ERR(regmap)) {
+			dev_err(dev, "failed to get regmap from its parent.\n");
+			return PTR_ERR(regmap);
+		}
 	} else {
 		base = devm_platform_ioremap_resource(pdev, 0);
 		if (IS_ERR(base))
-- 
cgit v1.2.3-59-g8ed1b


From 0e4b8a2349f3aa9b54c217b338ee65d8b2b6b739 Mon Sep 17 00:00:00 2001
From: Chunyan Zhang <chunyan.zhang@unisoc.com>
Date: Wed, 4 Mar 2020 15:27:30 +0800
Subject: clk: sprd: add clocks support for SC9863A

Add the list of clocks for the Unisoc SC9863A, along with clock
initialization.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200304072730.9193-8-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/sprd/Kconfig       |    8 +
 drivers/clk/sprd/Makefile      |    1 +
 drivers/clk/sprd/sc9863a-clk.c | 1772 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1781 insertions(+)
 create mode 100644 drivers/clk/sprd/sc9863a-clk.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig
index 3c219af25100..e18c80fbe804 100644
--- a/drivers/clk/sprd/Kconfig
+++ b/drivers/clk/sprd/Kconfig
@@ -13,4 +13,12 @@ config SPRD_SC9860_CLK
 	tristate "Support for the Spreadtrum SC9860 clocks"
 	depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
 	default ARM64 && ARCH_SPRD
+
+config SPRD_SC9863A_CLK
+	tristate "Support for the Spreadtrum SC9863A clocks"
+	depends on (ARM64 && ARCH_SPRD) || COMPILE_TEST
+	default ARM64 && ARCH_SPRD
+	help
+	  Support for the global clock controller on sc9863a devices.
+	  Say Y if you want to use peripheral devices on sc9863a SoC.
 endif
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index d4c00788d53c..41d90e0d7863 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -10,3 +10,4 @@ clk-sprd-y	+= pll.o
 
 ## SoC support
 obj-$(CONFIG_SPRD_SC9860_CLK)	+= sc9860-clk.o
+obj-$(CONFIG_SPRD_SC9863A_CLK)	+= sc9863a-clk.o
diff --git a/drivers/clk/sprd/sc9863a-clk.c b/drivers/clk/sprd/sc9863a-clk.c
new file mode 100644
index 000000000000..a0631f7756cf
--- /dev/null
+++ b/drivers/clk/sprd/sc9863a-clk.c
@@ -0,0 +1,1772 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A clock driver
+ *
+ * Copyright (C) 2019 Unisoc, Inc.
+ * Author: Chunyan Zhang <chunyan.zhang@unisoc.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/sprd,sc9863a-clk.h>
+
+#include "common.h"
+#include "composite.h"
+#include "div.h"
+#include "gate.h"
+#include "mux.h"
+#include "pll.h"
+
+/* mpll*_gate clocks control cpu cores, they were enabled by default */
+SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll0_gate, "mpll0-gate", "ext-26m", 0x94,
+			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll0_gate, "dpll0-gate", "ext-26m", 0x98,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(lpll_gate, "lpll-gate", "ext-26m", 0x9c,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(gpll_gate, "gpll-gate", "ext-26m", 0xa8,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(dpll1_gate, "dpll1-gate", "ext-26m", 0x1dc,
+			     0x1000, BIT(0), 0, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll1_gate, "mpll1-gate", "ext-26m", 0x1e0,
+			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(mpll2_gate, "mpll2-gate", "ext-26m", 0x1e4,
+			     0x1000, BIT(0), CLK_IGNORE_UNUSED, 0, 240);
+SPRD_PLL_SC_GATE_CLK_FW_NAME(isppll_gate, "isppll-gate", "ext-26m", 0x1e8,
+			     0x1000, BIT(0), 0, 0, 240);
+
+static struct sprd_clk_common *sc9863a_pmu_gate_clks[] = {
+	/* address base is 0x402b0000 */
+	&mpll0_gate.common,
+	&dpll0_gate.common,
+	&lpll_gate.common,
+	&gpll_gate.common,
+	&dpll1_gate.common,
+	&mpll1_gate.common,
+	&mpll2_gate.common,
+	&isppll_gate.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_pmu_gate_hws = {
+	.hws	= {
+		[CLK_MPLL0_GATE]	= &mpll0_gate.common.hw,
+		[CLK_DPLL0_GATE]	= &dpll0_gate.common.hw,
+		[CLK_LPLL_GATE]		= &lpll_gate.common.hw,
+		[CLK_GPLL_GATE]		= &gpll_gate.common.hw,
+		[CLK_DPLL1_GATE]	= &dpll1_gate.common.hw,
+		[CLK_MPLL1_GATE]	= &mpll1_gate.common.hw,
+		[CLK_MPLL2_GATE]	= &mpll2_gate.common.hw,
+		[CLK_ISPPLL_GATE]	= &isppll_gate.common.hw,
+	},
+	.num	= CLK_PMU_APB_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_pmu_gate_desc = {
+	.clk_clks	= sc9863a_pmu_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_pmu_gate_clks),
+	.hw_clks        = &sc9863a_pmu_gate_hws,
+};
+
+static const u64 itable[5] = {4, 1000000000, 1200000000,
+			      1400000000, 1600000000};
+
+static const struct clk_bit_field f_twpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 3,	.width = 3 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_FW_NAME(twpll, "twpll", "ext-26m", 0x4, 3, itable,
+			f_twpll, 240, 1000, 1000, 0, 0);
+static CLK_FIXED_FACTOR_HW(twpll_768m, "twpll-768m", &twpll.common.hw, 2, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_384m, "twpll-384m", &twpll.common.hw, 4, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_192m, "twpll-192m", &twpll.common.hw, 8, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_96m, "twpll-96m", &twpll.common.hw, 16, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_48m, "twpll-48m", &twpll.common.hw, 32, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_24m, "twpll-24m", &twpll.common.hw, 64, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_12m, "twpll-12m", &twpll.common.hw, 128, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_512m, "twpll-512m", &twpll.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_256m, "twpll-256m", &twpll.common.hw, 6, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_128m, "twpll-128m", &twpll.common.hw, 12, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_64m, "twpll-64m", &twpll.common.hw, 24, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_307m2, "twpll-307m2", &twpll.common.hw, 5, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_219m4, "twpll-219m4", &twpll.common.hw, 7, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_170m6, "twpll-170m6", &twpll.common.hw, 9, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_153m6, "twpll-153m6", &twpll.common.hw, 10, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_76m8, "twpll-76m8", &twpll.common.hw, 20, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_51m2, "twpll-51m2", &twpll.common.hw, 30, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_38m4, "twpll-38m4", &twpll.common.hw, 40, 1, 0);
+static CLK_FIXED_FACTOR_HW(twpll_19m2, "twpll-19m2", &twpll.common.hw, 80, 1, 0);
+
+static const struct clk_bit_field f_lpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 6,	.width = 2 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 0,	.width = 0 },	/* postdiv	*/
+};
+static SPRD_PLL_HW(lpll, "lpll", &lpll_gate.common.hw, 0x20, 3, itable,
+		   f_lpll, 240, 1000, 1000, 0, 0);
+static CLK_FIXED_FACTOR_HW(lpll_409m6, "lpll-409m6", &lpll.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(lpll_245m76, "lpll-245m76", &lpll.common.hw, 5, 1, 0);
+
+static const struct clk_bit_field f_gpll[PLL_FACT_MAX] = {
+	{ .shift = 95,	.width = 1 },	/* lock_done	*/
+	{ .shift = 0,	.width = 1 },	/* div_s	*/
+	{ .shift = 1,	.width = 1 },	/* mod_en	*/
+	{ .shift = 2,	.width = 1 },	/* sdm_en	*/
+	{ .shift = 0,	.width = 0 },	/* refin	*/
+	{ .shift = 6,	.width = 2 },	/* ibias	*/
+	{ .shift = 8,	.width = 11 },	/* n		*/
+	{ .shift = 55,	.width = 7 },	/* nint		*/
+	{ .shift = 32,	.width = 23},	/* kint		*/
+	{ .shift = 0,	.width = 0 },	/* prediv	*/
+	{ .shift = 80,	.width = 1 },	/* postdiv	*/
+};
+static SPRD_PLL_HW(gpll, "gpll", &gpll_gate.common.hw, 0x38, 3, itable,
+		   f_gpll, 240, 1000, 1000, 1, 400000000);
+
+static SPRD_PLL_HW(isppll, "isppll", &isppll_gate.common.hw, 0x50, 3, itable,
+		   f_gpll, 240, 1000, 1000, 0, 0);
+static CLK_FIXED_FACTOR_HW(isppll_468m, "isppll-468m", &isppll.common.hw, 2, 1, 0);
+
+static struct sprd_clk_common *sc9863a_pll_clks[] = {
+	/* address base is 0x40353000 */
+	&twpll.common,
+	&lpll.common,
+	&gpll.common,
+	&isppll.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_pll_hws = {
+	.hws	= {
+		[CLK_TWPLL]		= &twpll.common.hw,
+		[CLK_TWPLL_768M]	= &twpll_768m.hw,
+		[CLK_TWPLL_384M]	= &twpll_384m.hw,
+		[CLK_TWPLL_192M]	= &twpll_192m.hw,
+		[CLK_TWPLL_96M]		= &twpll_96m.hw,
+		[CLK_TWPLL_48M]		= &twpll_48m.hw,
+		[CLK_TWPLL_24M]		= &twpll_24m.hw,
+		[CLK_TWPLL_12M]		= &twpll_12m.hw,
+		[CLK_TWPLL_512M]	= &twpll_512m.hw,
+		[CLK_TWPLL_256M]	= &twpll_256m.hw,
+		[CLK_TWPLL_128M]	= &twpll_128m.hw,
+		[CLK_TWPLL_64M]		= &twpll_64m.hw,
+		[CLK_TWPLL_307M2]	= &twpll_307m2.hw,
+		[CLK_TWPLL_219M4]	= &twpll_219m4.hw,
+		[CLK_TWPLL_170M6]	= &twpll_170m6.hw,
+		[CLK_TWPLL_153M6]	= &twpll_153m6.hw,
+		[CLK_TWPLL_76M8]	= &twpll_76m8.hw,
+		[CLK_TWPLL_51M2]	= &twpll_51m2.hw,
+		[CLK_TWPLL_38M4]	= &twpll_38m4.hw,
+		[CLK_TWPLL_19M2]	= &twpll_19m2.hw,
+		[CLK_LPLL]		= &lpll.common.hw,
+		[CLK_LPLL_409M6]	= &lpll_409m6.hw,
+		[CLK_LPLL_245M76]	= &lpll_245m76.hw,
+		[CLK_GPLL]		= &gpll.common.hw,
+		[CLK_ISPPLL]		= &isppll.common.hw,
+		[CLK_ISPPLL_468M]	= &isppll_468m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G1_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_pll_desc = {
+	.clk_clks	= sc9863a_pll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_pll_clks),
+	.hw_clks        = &sc9863a_pll_hws,
+};
+
+static const u64 itable_mpll[6] = {5, 1000000000, 1200000000, 1400000000,
+				   1600000000, 1800000000};
+static SPRD_PLL_HW(mpll0, "mpll0", &mpll0_gate.common.hw, 0x0, 3, itable_mpll,
+		   f_gpll, 240, 1000, 1000, 1, 1000000000);
+static SPRD_PLL_HW(mpll1, "mpll1", &mpll1_gate.common.hw, 0x18, 3, itable_mpll,
+		   f_gpll, 240, 1000, 1000, 1, 1000000000);
+static SPRD_PLL_HW(mpll2, "mpll2", &mpll2_gate.common.hw, 0x30, 3, itable_mpll,
+		   f_gpll, 240, 1000, 1000, 1, 1000000000);
+static CLK_FIXED_FACTOR_HW(mpll2_675m, "mpll2-675m", &mpll2.common.hw, 2, 1, 0);
+
+static struct sprd_clk_common *sc9863a_mpll_clks[] = {
+	/* address base is 0x40359000 */
+	&mpll0.common,
+	&mpll1.common,
+	&mpll2.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mpll_hws = {
+	.hws	= {
+		[CLK_MPLL0]		= &mpll0.common.hw,
+		[CLK_MPLL1]		= &mpll1.common.hw,
+		[CLK_MPLL2]		= &mpll2.common.hw,
+		[CLK_MPLL2_675M]	= &mpll2_675m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G4_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mpll_desc = {
+	.clk_clks	= sc9863a_mpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mpll_clks),
+	.hw_clks        = &sc9863a_mpll_hws,
+};
+
+static SPRD_SC_GATE_CLK_FW_NAME(audio_gate,	"audio-gate",	"ext-26m",
+				0x4, 0x1000, BIT(8), 0, 0);
+
+static SPRD_PLL_FW_NAME(rpll, "rpll", "ext-26m", 0x10,
+			3, itable, f_lpll, 240, 1000, 1000, 0, 0);
+
+static CLK_FIXED_FACTOR_HW(rpll_390m, "rpll-390m", &rpll.common.hw, 2, 1, 0);
+static CLK_FIXED_FACTOR_HW(rpll_260m, "rpll-260m", &rpll.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(rpll_195m, "rpll-195m", &rpll.common.hw, 4, 1, 0);
+static CLK_FIXED_FACTOR_HW(rpll_26m, "rpll-26m", &rpll.common.hw, 30, 1, 0);
+
+static struct sprd_clk_common *sc9863a_rpll_clks[] = {
+	/* address base is 0x4035c000 */
+	&audio_gate.common,
+	&rpll.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_rpll_hws = {
+	.hws	= {
+		[CLK_AUDIO_GATE]	= &audio_gate.common.hw,
+		[CLK_RPLL]		= &rpll.common.hw,
+		[CLK_RPLL_390M]		= &rpll_390m.hw,
+		[CLK_RPLL_260M]		= &rpll_260m.hw,
+		[CLK_RPLL_195M]		= &rpll_195m.hw,
+		[CLK_RPLL_26M]		= &rpll_26m.hw,
+	},
+	.num	= CLK_ANLG_PHY_G5_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_rpll_desc = {
+	.clk_clks	= sc9863a_rpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_rpll_clks),
+	.hw_clks        = &sc9863a_rpll_hws,
+};
+
+static const u64 itable_dpll[5] = {4, 1211000000, 1320000000, 1570000000,
+				   1866000000};
+static SPRD_PLL_HW(dpll0, "dpll0", &dpll0_gate.common.hw, 0x0, 3, itable_dpll,
+		   f_lpll, 240, 1000, 1000, 0, 0);
+static SPRD_PLL_HW(dpll1, "dpll1", &dpll1_gate.common.hw, 0x18, 3, itable_dpll,
+		   f_lpll, 240, 1000, 1000, 0, 0);
+
+static CLK_FIXED_FACTOR_HW(dpll0_933m, "dpll0-933m", &dpll0.common.hw, 2, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll0_622m3, "dpll0-622m3", &dpll0.common.hw, 3, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_400m, "dpll1-400m", &dpll0.common.hw, 4, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_266m7, "dpll1-266m7", &dpll0.common.hw, 6, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_123m1, "dpll1-123m1", &dpll0.common.hw, 13, 1, 0);
+static CLK_FIXED_FACTOR_HW(dpll1_50m, "dpll1-50m", &dpll0.common.hw, 32, 1, 0);
+
+static struct sprd_clk_common *sc9863a_dpll_clks[] = {
+	/* address base is 0x40363000 */
+	&dpll0.common,
+	&dpll1.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_dpll_hws = {
+	.hws	= {
+		[CLK_DPLL0]		= &dpll0.common.hw,
+		[CLK_DPLL1]		= &dpll1.common.hw,
+		[CLK_DPLL0_933M]	= &dpll0_933m.hw,
+		[CLK_DPLL0_622M3]	= &dpll0_622m3.hw,
+		[CLK_DPLL0_400M]	= &dpll1_400m.hw,
+		[CLK_DPLL0_266M7]	= &dpll1_266m7.hw,
+		[CLK_DPLL0_123M1]	= &dpll1_123m1.hw,
+		[CLK_DPLL0_50M]		= &dpll1_50m.hw,
+
+	},
+	.num	= CLK_ANLG_PHY_G7_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_dpll_desc = {
+	.clk_clks	= sc9863a_dpll_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_dpll_clks),
+	.hw_clks        = &sc9863a_dpll_hws,
+};
+
+static CLK_FIXED_FACTOR_FW_NAME(clk_6m5, "clk-6m5", "ext-26m", 4, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(clk_4m3, "clk-4m3", "ext-26m", 6, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(clk_2m, "clk-2m", "ext-26m", 13, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(clk_250k, "clk-250k", "ext-26m", 104, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(rco_25m, "rco-25m", "rco-100m",	4, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(rco_4m, "rco-4m", "rco-100m", 25, 1, 0);
+static CLK_FIXED_FACTOR_FW_NAME(rco_2m, "rco-2m", "rco-100m", 50, 1, 0);
+
+#define SC9863A_MUX_FLAG	\
+	(CLK_GET_RATE_NOCACHE | CLK_SET_RATE_NO_REPARENT)
+
+static CLK_FIXED_FACTOR_FW_NAME(clk_13m, "clk-13m", "ext-26m", 2, 1, 0);
+static const struct clk_parent_data emc_clk_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &twpll_768m.hw  },
+	{ .hw = &twpll.common.hw  },
+};
+static SPRD_MUX_CLK_DATA(emc_clk, "emc-clk", emc_clk_parents, 0x220,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aon_apb_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_96m.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_COMP_CLK_DATA(aon_apb, "aon-apb", aon_apb_parents, 0x224,
+			  0, 3, 8, 2, 0);
+
+static const struct clk_parent_data adi_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_38m4.hw  },
+	{ .hw = &twpll_51m2.hw  },
+};
+static SPRD_MUX_CLK_DATA(adi_clk, "adi-clk", adi_parents, 0x228,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aux_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &rpll_26m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_COMP_CLK_DATA(aux0_clk, "aux0-clk", aux_parents, 0x22c,
+			  0, 5, 8, 4, 0);
+static SPRD_COMP_CLK_DATA(aux1_clk, "aux1-clk", aux_parents, 0x230,
+			  0, 5, 8, 4, 0);
+static SPRD_COMP_CLK_DATA(aux2_clk, "aux2-clk", aux_parents, 0x234,
+			  0, 5, 8, 4, 0);
+static SPRD_COMP_CLK_DATA(probe_clk, "probe-clk", aux_parents, 0x238,
+			  0, 5, 8, 4, 0);
+
+static const struct clk_parent_data pwm_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &rpll_26m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+};
+static SPRD_MUX_CLK_DATA(pwm0_clk, "pwm0-clk", pwm_parents, 0x23c,
+			 0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(pwm1_clk, "pwm1-clk", pwm_parents, 0x240,
+			 0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(pwm2_clk, "pwm2-clk", pwm_parents, 0x244,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aon_thm_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &clk_250k.hw  },
+};
+static SPRD_MUX_CLK_DATA(aon_thm_clk, "aon-thm-clk", aon_thm_parents, 0x25c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data audif_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_38m4.hw  },
+	{ .hw = &twpll_51m2.hw  },
+};
+static SPRD_MUX_CLK_DATA(audif_clk, "audif-clk", audif_parents, 0x264,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data cpu_dap_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_76m8.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(cpu_dap_clk, "cpu-dap-clk", cpu_dap_parents, 0x26c,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data cpu_ts_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(cpu_ts_clk, "cpu-ts-clk", cpu_ts_parents, 0x274,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data djtag_tck_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(djtag_tck_clk, "djtag-tck-clk", djtag_tck_parents, 0x28c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data emc_ref_parents[] = {
+	{ .hw = &clk_6m5.hw  },
+	{ .hw = &clk_13m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(emc_ref_clk, "emc-ref-clk", emc_ref_parents, 0x29c,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data cssys_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_96m.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &mpll2_675m.hw  },
+};
+static SPRD_COMP_CLK_DATA(cssys_clk, "cssys-clk", cssys_parents, 0x2a0,
+			  0, 4, 8, 2, 0);
+
+static const struct clk_parent_data aon_pmu_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-4m" },
+};
+static SPRD_MUX_CLK_DATA(aon_pmu_clk, "aon-pmu-clk", aon_pmu_parents, 0x2a8,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data pmu_26m_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(pmu_26m_clk, "26m-pmu-clk", pmu_26m_parents, 0x2ac,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data aon_tmr_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(aon_tmr_clk, "aon-tmr-clk", aon_tmr_parents, 0x2b0,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data power_cpu_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &rco_25m.hw  },
+	{ .fw_name = "rco-100m" },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_MUX_CLK_DATA(power_cpu_clk, "power-cpu-clk", power_cpu_parents, 0x2c4,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data ap_axi_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+};
+static SPRD_MUX_CLK_DATA(ap_axi, "ap-axi", ap_axi_parents, 0x2c8,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data sdio_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &rpll_390m.hw  },
+	{ .hw = &dpll1_400m.hw  },
+	{ .hw = &lpll_409m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(sdio0_2x, "sdio0-2x", sdio_parents, 0x2cc,
+			 0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio1_2x, "sdio1-2x", sdio_parents, 0x2d4,
+			 0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio2_2x, "sdio2-2x", sdio_parents, 0x2dc,
+			 0, 3, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(emmc_2x, "emmc-2x", sdio_parents, 0x2e4,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data dpu_parents[] = {
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_384m.hw  },
+};
+static SPRD_MUX_CLK_DATA(dpu_clk, "dpu", dpu_parents, 0x2f4,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data dpu_dpi_parents[] = {
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+};
+static SPRD_COMP_CLK_DATA(dpu_dpi, "dpu-dpi", dpu_dpi_parents, 0x2f8,
+			  0, 2, 8, 4, 0);
+
+static const struct clk_parent_data otg_ref_parents[] = {
+	{ .hw = &twpll_12m.hw  },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(otg_ref_clk, "otg-ref-clk", otg_ref_parents, 0x308,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data sdphy_apb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+};
+static SPRD_MUX_CLK_DATA(sdphy_apb_clk, "sdphy-apb-clk", sdphy_apb_parents, 0x330,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data alg_io_apb_parents[] = {
+	{ .hw = &rco_4m.hw  },
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_96m.hw  },
+};
+static SPRD_MUX_CLK_DATA(alg_io_apb_clk, "alg-io-apb-clk", alg_io_apb_parents, 0x33c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data gpu_parents[] = {
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &gpll.common.hw  },
+};
+static SPRD_COMP_CLK_DATA(gpu_core, "gpu-core", gpu_parents, 0x344,
+			  0, 3, 8, 2, 0);
+static SPRD_COMP_CLK_DATA(gpu_soc, "gpu-soc", gpu_parents, 0x348,
+			  0, 3, 8, 2, 0);
+
+static const struct clk_parent_data mm_emc_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+	{ .hw = &twpll_512m.hw  },
+};
+static SPRD_MUX_CLK_DATA(mm_emc, "mm-emc", mm_emc_parents, 0x350,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data mm_ahb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_96m.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_MUX_CLK_DATA(mm_ahb, "mm-ahb", mm_ahb_parents, 0x354,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data bpc_clk_parents[] = {
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+	{ .hw = &dpll0_622m3.hw  },
+};
+static SPRD_MUX_CLK_DATA(bpc_clk, "bpc-clk", bpc_clk_parents, 0x358,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data dcam_if_parents[] = {
+	{ .hw = &twpll_192m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+};
+static SPRD_MUX_CLK_DATA(dcam_if_clk, "dcam-if-clk", dcam_if_parents, 0x35c,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data isp_parents[] = {
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+};
+static SPRD_MUX_CLK_DATA(isp_clk, "isp-clk", isp_parents, 0x360,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data jpg_parents[] = {
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+};
+static SPRD_MUX_CLK_DATA(jpg_clk, "jpg-clk", jpg_parents, 0x364,
+			 0, 2, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(cpp_clk, "cpp-clk", jpg_parents, 0x368,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data sensor_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_96m.hw  },
+};
+static SPRD_COMP_CLK_DATA(sensor0_clk, "sensor0-clk", sensor_parents, 0x36c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(sensor1_clk, "sensor1-clk", sensor_parents, 0x370,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(sensor2_clk, "sensor2-clk", sensor_parents, 0x374,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data mm_vemc_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &isppll_468m.hw  },
+};
+static SPRD_MUX_CLK_DATA(mm_vemc, "mm-vemc", mm_vemc_parents, 0x378,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static SPRD_MUX_CLK_DATA(mm_vahb, "mm-vahb", mm_ahb_parents, 0x37c,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data vsp_parents[] = {
+	{ .hw = &twpll_76m8.hw  },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+	{ .hw = &twpll_384m.hw  },
+};
+static SPRD_MUX_CLK_DATA(clk_vsp, "vsp-clk", vsp_parents, 0x380,
+			 0, 3, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data core_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &twpll_768m.hw  },
+	{ .hw = &lpll.common.hw  },
+	{ .hw = &dpll0.common.hw  },
+	{ .hw = &mpll2.common.hw  },
+	{ .hw = &mpll0.common.hw  },
+	{ .hw = &mpll1.common.hw  },
+};
+static SPRD_COMP_CLK_DATA(core0_clk, "core0-clk", core_parents, 0xa20,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core1_clk, "core1-clk", core_parents, 0xa24,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core2_clk, "core2-clk", core_parents, 0xa28,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core3_clk, "core3-clk", core_parents, 0xa2c,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core4_clk, "core4-clk", core_parents, 0xa30,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core5_clk, "core5-clk", core_parents, 0xa34,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core6_clk, "core6-clk", core_parents, 0xa38,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(core7_clk, "core7-clk", core_parents, 0xa3c,
+			  0, 3, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(scu_clk, "scu-clk", core_parents, 0xa40,
+			  0, 3, 8, 3, 0);
+
+static SPRD_DIV_CLK_HW(ace_clk, "ace-clk", &scu_clk.common.hw, 0xa44,
+		       8, 3, 0);
+static SPRD_DIV_CLK_HW(axi_periph_clk, "axi-periph-clk", &scu_clk.common.hw, 0xa48,
+		       8, 3, 0);
+static SPRD_DIV_CLK_HW(axi_acp_clk, "axi-acp-clk", &scu_clk.common.hw, 0xa4c,
+		       8, 3, 0);
+
+static const struct clk_parent_data atb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+	{ .hw = &mpll2.common.hw  },
+};
+static SPRD_COMP_CLK_DATA(atb_clk, "atb-clk", atb_parents, 0xa50,
+			  0, 2, 8, 3, 0);
+static SPRD_DIV_CLK_HW(debug_apb_clk, "debug-apb-clk", &atb_clk.common.hw, 0xa54,
+		       8, 3, 0);
+
+static const struct clk_parent_data gic_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_384m.hw  },
+	{ .hw = &twpll_512m.hw  },
+};
+static SPRD_COMP_CLK_DATA(gic_clk, "gic-clk", gic_parents, 0xa58,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(periph_clk, "periph-clk", gic_parents, 0xa5c,
+			  0, 2, 8, 3, 0);
+
+static struct sprd_clk_common *sc9863a_aon_clks[] = {
+	/* address base is 0x402d0000 */
+	&emc_clk.common,
+	&aon_apb.common,
+	&adi_clk.common,
+	&aux0_clk.common,
+	&aux1_clk.common,
+	&aux2_clk.common,
+	&probe_clk.common,
+	&pwm0_clk.common,
+	&pwm1_clk.common,
+	&pwm2_clk.common,
+	&aon_thm_clk.common,
+	&audif_clk.common,
+	&cpu_dap_clk.common,
+	&cpu_ts_clk.common,
+	&djtag_tck_clk.common,
+	&emc_ref_clk.common,
+	&cssys_clk.common,
+	&aon_pmu_clk.common,
+	&pmu_26m_clk.common,
+	&aon_tmr_clk.common,
+	&power_cpu_clk.common,
+	&ap_axi.common,
+	&sdio0_2x.common,
+	&sdio1_2x.common,
+	&sdio2_2x.common,
+	&emmc_2x.common,
+	&dpu_clk.common,
+	&dpu_dpi.common,
+	&otg_ref_clk.common,
+	&sdphy_apb_clk.common,
+	&alg_io_apb_clk.common,
+	&gpu_core.common,
+	&gpu_soc.common,
+	&mm_emc.common,
+	&mm_ahb.common,
+	&bpc_clk.common,
+	&dcam_if_clk.common,
+	&isp_clk.common,
+	&jpg_clk.common,
+	&cpp_clk.common,
+	&sensor0_clk.common,
+	&sensor1_clk.common,
+	&sensor2_clk.common,
+	&mm_vemc.common,
+	&mm_vahb.common,
+	&clk_vsp.common,
+	&core0_clk.common,
+	&core1_clk.common,
+	&core2_clk.common,
+	&core3_clk.common,
+	&core4_clk.common,
+	&core5_clk.common,
+	&core6_clk.common,
+	&core7_clk.common,
+	&scu_clk.common,
+	&ace_clk.common,
+	&axi_periph_clk.common,
+	&axi_acp_clk.common,
+	&atb_clk.common,
+	&debug_apb_clk.common,
+	&gic_clk.common,
+	&periph_clk.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_aon_clk_hws = {
+	.hws	= {
+		[CLK_13M]		= &clk_13m.hw,
+		[CLK_6M5]		= &clk_6m5.hw,
+		[CLK_4M3]		= &clk_4m3.hw,
+		[CLK_2M]		= &clk_2m.hw,
+		[CLK_250K]		= &clk_250k.hw,
+		[CLK_RCO_25M]		= &rco_25m.hw,
+		[CLK_RCO_4M]		= &rco_4m.hw,
+		[CLK_RCO_2M]		= &rco_2m.hw,
+		[CLK_EMC]		= &emc_clk.common.hw,
+		[CLK_AON_APB]		= &aon_apb.common.hw,
+		[CLK_ADI]		= &adi_clk.common.hw,
+		[CLK_AUX0]		= &aux0_clk.common.hw,
+		[CLK_AUX1]		= &aux1_clk.common.hw,
+		[CLK_AUX2]		= &aux2_clk.common.hw,
+		[CLK_PROBE]		= &probe_clk.common.hw,
+		[CLK_PWM0]		= &pwm0_clk.common.hw,
+		[CLK_PWM1]		= &pwm1_clk.common.hw,
+		[CLK_PWM2]		= &pwm2_clk.common.hw,
+		[CLK_AON_THM]		= &aon_thm_clk.common.hw,
+		[CLK_AUDIF]		= &audif_clk.common.hw,
+		[CLK_CPU_DAP]		= &cpu_dap_clk.common.hw,
+		[CLK_CPU_TS]		= &cpu_ts_clk.common.hw,
+		[CLK_DJTAG_TCK]		= &djtag_tck_clk.common.hw,
+		[CLK_EMC_REF]		= &emc_ref_clk.common.hw,
+		[CLK_CSSYS]		= &cssys_clk.common.hw,
+		[CLK_AON_PMU]		= &aon_pmu_clk.common.hw,
+		[CLK_PMU_26M]		= &pmu_26m_clk.common.hw,
+		[CLK_AON_TMR]		= &aon_tmr_clk.common.hw,
+		[CLK_POWER_CPU]		= &power_cpu_clk.common.hw,
+		[CLK_AP_AXI]		= &ap_axi.common.hw,
+		[CLK_SDIO0_2X]		= &sdio0_2x.common.hw,
+		[CLK_SDIO1_2X]		= &sdio1_2x.common.hw,
+		[CLK_SDIO2_2X]		= &sdio2_2x.common.hw,
+		[CLK_EMMC_2X]		= &emmc_2x.common.hw,
+		[CLK_DPU]		= &dpu_clk.common.hw,
+		[CLK_DPU_DPI]		= &dpu_dpi.common.hw,
+		[CLK_OTG_REF]		= &otg_ref_clk.common.hw,
+		[CLK_SDPHY_APB]		= &sdphy_apb_clk.common.hw,
+		[CLK_ALG_IO_APB]	= &alg_io_apb_clk.common.hw,
+		[CLK_GPU_CORE]		= &gpu_core.common.hw,
+		[CLK_GPU_SOC]		= &gpu_soc.common.hw,
+		[CLK_MM_EMC]		= &mm_emc.common.hw,
+		[CLK_MM_AHB]		= &mm_ahb.common.hw,
+		[CLK_BPC]		= &bpc_clk.common.hw,
+		[CLK_DCAM_IF]		= &dcam_if_clk.common.hw,
+		[CLK_ISP]		= &isp_clk.common.hw,
+		[CLK_JPG]		= &jpg_clk.common.hw,
+		[CLK_CPP]		= &cpp_clk.common.hw,
+		[CLK_SENSOR0]		= &sensor0_clk.common.hw,
+		[CLK_SENSOR1]		= &sensor1_clk.common.hw,
+		[CLK_SENSOR2]		= &sensor2_clk.common.hw,
+		[CLK_MM_VEMC]		= &mm_vemc.common.hw,
+		[CLK_MM_VAHB]		= &mm_vahb.common.hw,
+		[CLK_VSP]		= &clk_vsp.common.hw,
+		[CLK_CORE0]		= &core0_clk.common.hw,
+		[CLK_CORE1]		= &core1_clk.common.hw,
+		[CLK_CORE2]		= &core2_clk.common.hw,
+		[CLK_CORE3]		= &core3_clk.common.hw,
+		[CLK_CORE4]		= &core4_clk.common.hw,
+		[CLK_CORE5]		= &core5_clk.common.hw,
+		[CLK_CORE6]		= &core6_clk.common.hw,
+		[CLK_CORE7]		= &core7_clk.common.hw,
+		[CLK_SCU]		= &scu_clk.common.hw,
+		[CLK_ACE]		= &ace_clk.common.hw,
+		[CLK_AXI_PERIPH]	= &axi_periph_clk.common.hw,
+		[CLK_AXI_ACP]		= &axi_acp_clk.common.hw,
+		[CLK_ATB]		= &atb_clk.common.hw,
+		[CLK_DEBUG_APB]		= &debug_apb_clk.common.hw,
+		[CLK_GIC]		= &gic_clk.common.hw,
+		[CLK_PERIPH]		= &periph_clk.common.hw,
+	},
+	.num	= CLK_AON_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_aon_clk_desc = {
+	.clk_clks	= sc9863a_aon_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_aon_clks),
+	.hw_clks	= &sc9863a_aon_clk_hws,
+};
+
+static const struct clk_parent_data ap_apb_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_64m.hw  },
+	{ .hw = &twpll_96m.hw  },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_MUX_CLK_DATA(ap_apb, "ap-apb", ap_apb_parents, 0x20,
+			 0, 2, SC9863A_MUX_FLAG);
+
+static const struct clk_parent_data ap_ce_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_256m.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_ce, "ap-ce", ap_ce_parents, 0x24,
+			  0, 1, 8, 3, 0);
+
+static const struct clk_parent_data nandc_ecc_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_256m.hw  },
+	{ .hw = &twpll_307m2.hw  },
+};
+static SPRD_COMP_CLK_DATA(nandc_ecc, "nandc-ecc", nandc_ecc_parents, 0x28,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data nandc_26m_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(nandc_26m, "nandc-26m", nandc_26m_parents, 0x2c,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(emmc_32k, "emmc-32k", nandc_26m_parents, 0x30,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio0_32k, "sdio0-32k", nandc_26m_parents, 0x34,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio1_32k, "sdio1-32k", nandc_26m_parents, 0x38,
+			 0, 1, SC9863A_MUX_FLAG);
+static SPRD_MUX_CLK_DATA(sdio2_32k, "sdio2-32k", nandc_26m_parents, 0x3c,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static SPRD_GATE_CLK_HW(otg_utmi, "otg-utmi", &aon_apb.common.hw, 0x40,
+			BIT(16), 0, 0);
+
+static const struct clk_parent_data ap_uart_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_51m2.hw  },
+	{ .hw = &twpll_96m.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_uart0,	"ap-uart0",	ap_uart_parents, 0x44,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart1,	"ap-uart1",	ap_uart_parents, 0x48,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart2,	"ap-uart2",	ap_uart_parents, 0x4c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart3,	"ap-uart3",	ap_uart_parents, 0x50,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_uart4,	"ap-uart4",	ap_uart_parents, 0x54,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data i2c_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_48m.hw  },
+	{ .hw = &twpll_51m2.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_i2c0, "ap-i2c0", i2c_parents, 0x58,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c1, "ap-i2c1", i2c_parents, 0x5c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c2, "ap-i2c2", i2c_parents, 0x60,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c3, "ap-i2c3", i2c_parents, 0x64,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c4, "ap-i2c4", i2c_parents, 0x68,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c5, "ap-i2c5", i2c_parents, 0x6c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_i2c6, "ap-i2c6", i2c_parents, 0x70,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data spi_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+	{ .hw = &twpll_192m.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_spi0, "ap-spi0", spi_parents, 0x74,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_spi1, "ap-spi1", spi_parents, 0x78,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_spi2, "ap-spi2", spi_parents, 0x7c,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_spi3, "ap-spi3", spi_parents, 0x80,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data iis_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_128m.hw  },
+	{ .hw = &twpll_153m6.hw  },
+};
+static SPRD_COMP_CLK_DATA(ap_iis0, "ap-iis0", iis_parents, 0x84,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_iis1, "ap-iis1", iis_parents, 0x88,
+			  0, 2, 8, 3, 0);
+static SPRD_COMP_CLK_DATA(ap_iis2, "ap-iis2", iis_parents, 0x8c,
+			  0, 2, 8, 3, 0);
+
+static const struct clk_parent_data sim0_parents[] = {
+	{ .fw_name = "ext-26m" },
+	{ .hw = &twpll_51m2.hw  },
+	{ .hw = &twpll_64m.hw  },
+	{ .hw = &twpll_96m.hw  },
+	{ .hw = &twpll_128m.hw  },
+};
+static SPRD_COMP_CLK_DATA(sim0, "sim0", sim0_parents, 0x90,
+			  0, 3, 8, 3, 0);
+
+static const struct clk_parent_data sim0_32k_parents[] = {
+	{ .fw_name = "ext-32k" },
+	{ .fw_name = "ext-26m" },
+};
+static SPRD_MUX_CLK_DATA(sim0_32k, "sim0-32k", sim0_32k_parents, 0x94,
+			 0, 1, SC9863A_MUX_FLAG);
+
+static struct sprd_clk_common *sc9863a_ap_clks[] = {
+	/* address base is 0x21500000 */
+	&ap_apb.common,
+	&ap_ce.common,
+	&nandc_ecc.common,
+	&nandc_26m.common,
+	&emmc_32k.common,
+	&sdio0_32k.common,
+	&sdio1_32k.common,
+	&sdio2_32k.common,
+	&otg_utmi.common,
+	&ap_uart0.common,
+	&ap_uart1.common,
+	&ap_uart2.common,
+	&ap_uart3.common,
+	&ap_uart4.common,
+	&ap_i2c0.common,
+	&ap_i2c1.common,
+	&ap_i2c2.common,
+	&ap_i2c3.common,
+	&ap_i2c4.common,
+	&ap_i2c5.common,
+	&ap_i2c6.common,
+	&ap_spi0.common,
+	&ap_spi1.common,
+	&ap_spi2.common,
+	&ap_spi3.common,
+	&ap_iis0.common,
+	&ap_iis1.common,
+	&ap_iis2.common,
+	&sim0.common,
+	&sim0_32k.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_ap_clk_hws = {
+	.hws	= {
+		[CLK_AP_APB]	= &ap_apb.common.hw,
+		[CLK_AP_CE]	= &ap_ce.common.hw,
+		[CLK_NANDC_ECC]	= &nandc_ecc.common.hw,
+		[CLK_NANDC_26M]	= &nandc_26m.common.hw,
+		[CLK_EMMC_32K]	= &emmc_32k.common.hw,
+		[CLK_SDIO0_32K]	= &sdio0_32k.common.hw,
+		[CLK_SDIO1_32K]	= &sdio1_32k.common.hw,
+		[CLK_SDIO2_32K]	= &sdio2_32k.common.hw,
+		[CLK_OTG_UTMI]	= &otg_utmi.common.hw,
+		[CLK_AP_UART0]	= &ap_uart0.common.hw,
+		[CLK_AP_UART1]	= &ap_uart1.common.hw,
+		[CLK_AP_UART2]	= &ap_uart2.common.hw,
+		[CLK_AP_UART3]	= &ap_uart3.common.hw,
+		[CLK_AP_UART4]	= &ap_uart4.common.hw,
+		[CLK_AP_I2C0]	= &ap_i2c0.common.hw,
+		[CLK_AP_I2C1]	= &ap_i2c1.common.hw,
+		[CLK_AP_I2C2]	= &ap_i2c2.common.hw,
+		[CLK_AP_I2C3]	= &ap_i2c3.common.hw,
+		[CLK_AP_I2C4]	= &ap_i2c4.common.hw,
+		[CLK_AP_I2C5]	= &ap_i2c5.common.hw,
+		[CLK_AP_I2C6]	= &ap_i2c6.common.hw,
+		[CLK_AP_SPI0]	= &ap_spi0.common.hw,
+		[CLK_AP_SPI1]	= &ap_spi1.common.hw,
+		[CLK_AP_SPI2]	= &ap_spi2.common.hw,
+		[CLK_AP_SPI3]	= &ap_spi3.common.hw,
+		[CLK_AP_IIS0]	= &ap_iis0.common.hw,
+		[CLK_AP_IIS1]	= &ap_iis1.common.hw,
+		[CLK_AP_IIS2]	= &ap_iis2.common.hw,
+		[CLK_SIM0]	= &sim0.common.hw,
+		[CLK_SIM0_32K]	= &sim0_32k.common.hw,
+	},
+	.num	= CLK_AP_CLK_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_ap_clk_desc = {
+	.clk_clks	= sc9863a_ap_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_ap_clks),
+	.hw_clks	= &sc9863a_ap_clk_hws,
+};
+
+static SPRD_SC_GATE_CLK_HW(otg_eb, "otg-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dma_eb, "dma-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ce_eb, "ce-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK_HW(nandc_eb, "nandc-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio0_eb, "sdio0-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio1_eb, "sdio1-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio2_eb, "sdio2-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(emmc_eb, "emmc-eb", &ap_axi.common.hw, 0x0, 0x1000,
+			   BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(emmc_32k_eb, "emmc-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(27), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio0_32k_eb, "sdio0-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(28), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio1_32k_eb, "sdio1-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(29), 0, 0);
+static SPRD_SC_GATE_CLK_HW(sdio2_32k_eb, "sdio2-32k-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(30), 0, 0);
+static SPRD_SC_GATE_CLK_HW(nandc_26m_eb, "nandc-26m-eb", &ap_axi.common.hw, 0x0,
+			   0x1000, BIT(31), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dma_eb2, "dma-eb2", &ap_axi.common.hw, 0x18,
+			   0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ce_eb2, "ce-eb2", &ap_axi.common.hw, 0x18,
+			   0x1000, BIT(1), 0, 0);
+
+static struct sprd_clk_common *sc9863a_apahb_gate_clks[] = {
+	/* address base is 0x20e00000 */
+	&otg_eb.common,
+	&dma_eb.common,
+	&ce_eb.common,
+	&nandc_eb.common,
+	&sdio0_eb.common,
+	&sdio1_eb.common,
+	&sdio2_eb.common,
+	&emmc_eb.common,
+	&emmc_32k_eb.common,
+	&sdio0_32k_eb.common,
+	&sdio1_32k_eb.common,
+	&sdio2_32k_eb.common,
+	&nandc_26m_eb.common,
+	&dma_eb2.common,
+	&ce_eb2.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_apahb_gate_hws = {
+	.hws	= {
+		[CLK_OTG_EB]		= &otg_eb.common.hw,
+		[CLK_DMA_EB]		= &dma_eb.common.hw,
+		[CLK_CE_EB]		= &ce_eb.common.hw,
+		[CLK_NANDC_EB]		= &nandc_eb.common.hw,
+		[CLK_SDIO0_EB]		= &sdio0_eb.common.hw,
+		[CLK_SDIO1_EB]		= &sdio1_eb.common.hw,
+		[CLK_SDIO2_EB]		= &sdio2_eb.common.hw,
+		[CLK_EMMC_EB]		= &emmc_eb.common.hw,
+		[CLK_EMMC_32K_EB]	= &emmc_32k_eb.common.hw,
+		[CLK_SDIO0_32K_EB]	= &sdio0_32k_eb.common.hw,
+		[CLK_SDIO1_32K_EB]	= &sdio1_32k_eb.common.hw,
+		[CLK_SDIO2_32K_EB]	= &sdio2_32k_eb.common.hw,
+		[CLK_NANDC_26M_EB]	= &nandc_26m_eb.common.hw,
+		[CLK_DMA_EB2]		= &dma_eb2.common.hw,
+		[CLK_CE_EB2]		= &ce_eb2.common.hw,
+	},
+	.num	= CLK_AP_AHB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_apahb_gate_desc = {
+	.clk_clks	= sc9863a_apahb_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_apahb_gate_clks),
+	.hw_clks	= &sc9863a_apahb_gate_hws,
+};
+
+/* aon gate clocks */
+static SPRD_SC_GATE_CLK_HW(gpio_eb, "gpio-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pwm0_eb,	"pwm0-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pwm1_eb,	"pwm1-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(pwm2_eb,	"pwm2-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pwm3_eb,	"pwm3-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_HW(kpd_eb,	"kpd-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_syst_eb,	"aon-syst-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_syst_eb,	"ap-syst-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aon_tmr_eb,	"aon-tmr-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(efuse_eb,	"efuse-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(13), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(eic_eb,	"eic-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(intc_eb,	"intc-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(adi_eb,	"adi-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(audif_eb,	"audif-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aud_eb,	"aud-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_HW(vbc_eb,	"vbc-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK_HW(pin_eb,	"pin-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_wdg_eb,	"ap-wdg-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(24), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_eb,	"mm-eb",	&aon_apb.common.hw, 0x0,
+			   0x1000, BIT(25), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aon_apb_ckg_eb, "aon-apb-ckg-eb", &aon_apb.common.hw,
+			   0x0, 0x1000, BIT(26), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_ts0_eb, "ca53-ts0-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(28), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_ts1_eb, "ca53-ts1-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(29), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_dap_eb, "ca53-dap-eb",	&aon_apb.common.hw,
+			   0x0, 0x1000, BIT(30), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(pmu_eb,	"pmu-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(thm_eb,	"thm-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(1), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aux0_eb,	"aux0-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aux1_eb,	"aux1-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aux2_eb,	"aux2-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(probe_eb,	"probe-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_HW(emc_ref_eb,	"emc-ref-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_wdg_eb,	"ca53-wdg-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr1_eb,	"ap-tmr1-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr2_eb,	"ap-tmr2-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(disp_emc_eb,	"disp-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(zip_emc_eb,	"zip-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gsp_emc_eb,	"gsp-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_vsp_eb,	"mm-vsp-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mdar_eb,	"mdar-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_HW(rtc4m0_cal_eb, "rtc4m0-cal-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_HW(rtc4m1_cal_eb, "rtc4m1-cal-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK_HW(djtag_eb,	"djtag-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(20), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mbox_eb,	"mbox-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(21), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_dma_eb,	"aon-dma-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(22), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_apb_def_eb, "aon-apb-def-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(25), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ca5_ts0_eb,	"ca5-ts0-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(26), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dbg_eb,	"dbg-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(28), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dbg_emc_eb,	"dbg-emc-eb",	&aon_apb.common.hw,
+			   0x4, 0x1000, BIT(29), 0, 0);
+static SPRD_SC_GATE_CLK_HW(cross_trig_eb, "cross-trig-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(30), 0, 0);
+static SPRD_SC_GATE_CLK_HW(serdes_dphy_eb, "serdes-dphy-eb", &aon_apb.common.hw,
+			   0x4, 0x1000, BIT(31), 0, 0);
+static SPRD_SC_GATE_CLK_HW(arch_rtc_eb,	"arch-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(0), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(kpd_rtc_eb,	"kpd-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_syst_rtc_eb, "aon-syst-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(2), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_syst_rtc_eb, "ap-syst-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(3), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(aon_tmr_rtc_eb, "aon-tmr-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(4), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr0_rtc_eb, "ap-tmr0-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_HW(eic_rtc_eb, "eic-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(6), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(eic_rtcdv5_eb, "eic-rtcdv5-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(7), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_wdg_rtc_eb, "ap-wdg-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(8), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ca53_wdg_rtc_eb, "ca53-wdg-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(9), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(thm_rtc_eb, "thm-rtc-eb",	&aon_apb.common.hw,
+			   0x10, 0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(athma_rtc_eb, "athma-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gthma_rtc_eb, "gthma-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK_HW(athma_rtc_a_eb, "athma-rtc-a-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gthma_rtc_a_eb, "gthma-rtc-a-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr1_rtc_eb, "ap-tmr1-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_tmr2_rtc_eb, "ap-tmr2-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dxco_lc_rtc_eb, "dxco-lc-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_HW(bb_cal_rtc_eb, "bb-cal-rtc-eb", &aon_apb.common.hw,
+			   0x10, 0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_HW(gpu_eb, "gpu-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_HW(disp_eb, "disp-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_emc_eb, "mm-emc-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(power_cpu_eb, "power-cpu-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(10), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(hw_i2c_eb, "hw-i2c-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mm_vsp_emc_eb, "mm-vsp-emc-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(vsp_eb, "vsp-eb", &aon_apb.common.hw, 0x50,
+			   0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK_HW(cssys_eb, "cssys-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dmc_eb, "dmc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(5), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(rosc_eb, "rosc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_HW(s_d_cfg_eb, "s-d-cfg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_HW(s_d_ref_eb, "s-d-ref-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_HW(b_dma_eb, "b-dma-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_HW(anlg_eb, "anlg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(11), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(anlg_apb_eb, "anlg-apb-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK_HW(bsmtmr_eb, "bsmtmr-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_HW(ap_axi_eb, "ap-axi-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(15), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc0_eb, "ap-intc0-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(16), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc1_eb, "ap-intc1-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(17), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc2_eb, "ap-intc2-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(18), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc3_eb, "ap-intc3-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(19), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc4_eb, "ap-intc4-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(20), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(ap_intc5_eb, "ap-intc5-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(21), CLK_IGNORE_UNUSED, 0);
+static SPRD_SC_GATE_CLK_HW(scc_eb, "scc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(22), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dphy_cfg_eb, "dphy-cfg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(23), 0, 0);
+static SPRD_SC_GATE_CLK_HW(dphy_ref_eb, "dphy-ref-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(24), 0, 0);
+static SPRD_SC_GATE_CLK_HW(cphy_cfg_eb, "cphy-cfg-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(25), 0, 0);
+static SPRD_SC_GATE_CLK_HW(otg_ref_eb, "otg-ref-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(26), 0, 0);
+static SPRD_SC_GATE_CLK_HW(serdes_eb, "serdes-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(27), 0, 0);
+static SPRD_SC_GATE_CLK_HW(aon_ap_emc_eb, "aon-ap-emc-eb", &aon_apb.common.hw, 0xb0,
+			   0x1000, BIT(28), 0, 0);
+static struct sprd_clk_common *sc9863a_aonapb_gate_clks[] = {
+	/* address base is 0x402e0000 */
+	&gpio_eb.common,
+	&pwm0_eb.common,
+	&pwm1_eb.common,
+	&pwm2_eb.common,
+	&pwm3_eb.common,
+	&kpd_eb.common,
+	&aon_syst_eb.common,
+	&ap_syst_eb.common,
+	&aon_tmr_eb.common,
+	&efuse_eb.common,
+	&eic_eb.common,
+	&intc_eb.common,
+	&adi_eb.common,
+	&audif_eb.common,
+	&aud_eb.common,
+	&vbc_eb.common,
+	&pin_eb.common,
+	&ap_wdg_eb.common,
+	&mm_eb.common,
+	&aon_apb_ckg_eb.common,
+	&ca53_ts0_eb.common,
+	&ca53_ts1_eb.common,
+	&ca53_dap_eb.common,
+	&pmu_eb.common,
+	&thm_eb.common,
+	&aux0_eb.common,
+	&aux1_eb.common,
+	&aux2_eb.common,
+	&probe_eb.common,
+	&emc_ref_eb.common,
+	&ca53_wdg_eb.common,
+	&ap_tmr1_eb.common,
+	&ap_tmr2_eb.common,
+	&disp_emc_eb.common,
+	&zip_emc_eb.common,
+	&gsp_emc_eb.common,
+	&mm_vsp_eb.common,
+	&mdar_eb.common,
+	&rtc4m0_cal_eb.common,
+	&rtc4m1_cal_eb.common,
+	&djtag_eb.common,
+	&mbox_eb.common,
+	&aon_dma_eb.common,
+	&aon_apb_def_eb.common,
+	&ca5_ts0_eb.common,
+	&dbg_eb.common,
+	&dbg_emc_eb.common,
+	&cross_trig_eb.common,
+	&serdes_dphy_eb.common,
+	&arch_rtc_eb.common,
+	&kpd_rtc_eb.common,
+	&aon_syst_rtc_eb.common,
+	&ap_syst_rtc_eb.common,
+	&aon_tmr_rtc_eb.common,
+	&ap_tmr0_rtc_eb.common,
+	&eic_rtc_eb.common,
+	&eic_rtcdv5_eb.common,
+	&ap_wdg_rtc_eb.common,
+	&ca53_wdg_rtc_eb.common,
+	&thm_rtc_eb.common,
+	&athma_rtc_eb.common,
+	&gthma_rtc_eb.common,
+	&athma_rtc_a_eb.common,
+	&gthma_rtc_a_eb.common,
+	&ap_tmr1_rtc_eb.common,
+	&ap_tmr2_rtc_eb.common,
+	&dxco_lc_rtc_eb.common,
+	&bb_cal_rtc_eb.common,
+	&gpu_eb.common,
+	&disp_eb.common,
+	&mm_emc_eb.common,
+	&power_cpu_eb.common,
+	&hw_i2c_eb.common,
+	&mm_vsp_emc_eb.common,
+	&vsp_eb.common,
+	&cssys_eb.common,
+	&dmc_eb.common,
+	&rosc_eb.common,
+	&s_d_cfg_eb.common,
+	&s_d_ref_eb.common,
+	&b_dma_eb.common,
+	&anlg_eb.common,
+	&anlg_apb_eb.common,
+	&bsmtmr_eb.common,
+	&ap_axi_eb.common,
+	&ap_intc0_eb.common,
+	&ap_intc1_eb.common,
+	&ap_intc2_eb.common,
+	&ap_intc3_eb.common,
+	&ap_intc4_eb.common,
+	&ap_intc5_eb.common,
+	&scc_eb.common,
+	&dphy_cfg_eb.common,
+	&dphy_ref_eb.common,
+	&cphy_cfg_eb.common,
+	&otg_ref_eb.common,
+	&serdes_eb.common,
+	&aon_ap_emc_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_aonapb_gate_hws = {
+	.hws	= {
+		[CLK_GPIO_EB]		= &gpio_eb.common.hw,
+		[CLK_PWM0_EB]		= &pwm0_eb.common.hw,
+		[CLK_PWM1_EB]		= &pwm1_eb.common.hw,
+		[CLK_PWM2_EB]		= &pwm2_eb.common.hw,
+		[CLK_PWM3_EB]		= &pwm3_eb.common.hw,
+		[CLK_KPD_EB]		= &kpd_eb.common.hw,
+		[CLK_AON_SYST_EB]	= &aon_syst_eb.common.hw,
+		[CLK_AP_SYST_EB]	= &ap_syst_eb.common.hw,
+		[CLK_AON_TMR_EB]	= &aon_tmr_eb.common.hw,
+		[CLK_EFUSE_EB]		= &efuse_eb.common.hw,
+		[CLK_EIC_EB]		= &eic_eb.common.hw,
+		[CLK_INTC_EB]		= &intc_eb.common.hw,
+		[CLK_ADI_EB]		= &adi_eb.common.hw,
+		[CLK_AUDIF_EB]		= &audif_eb.common.hw,
+		[CLK_AUD_EB]		= &aud_eb.common.hw,
+		[CLK_VBC_EB]		= &vbc_eb.common.hw,
+		[CLK_PIN_EB]		= &pin_eb.common.hw,
+		[CLK_AP_WDG_EB]		= &ap_wdg_eb.common.hw,
+		[CLK_MM_EB]		= &mm_eb.common.hw,
+		[CLK_AON_APB_CKG_EB]	= &aon_apb_ckg_eb.common.hw,
+		[CLK_CA53_TS0_EB]	= &ca53_ts0_eb.common.hw,
+		[CLK_CA53_TS1_EB]	= &ca53_ts1_eb.common.hw,
+		[CLK_CS53_DAP_EB]	= &ca53_dap_eb.common.hw,
+		[CLK_PMU_EB]		= &pmu_eb.common.hw,
+		[CLK_THM_EB]		= &thm_eb.common.hw,
+		[CLK_AUX0_EB]		= &aux0_eb.common.hw,
+		[CLK_AUX1_EB]		= &aux1_eb.common.hw,
+		[CLK_AUX2_EB]		= &aux2_eb.common.hw,
+		[CLK_PROBE_EB]		= &probe_eb.common.hw,
+		[CLK_EMC_REF_EB]	= &emc_ref_eb.common.hw,
+		[CLK_CA53_WDG_EB]	= &ca53_wdg_eb.common.hw,
+		[CLK_AP_TMR1_EB]	= &ap_tmr1_eb.common.hw,
+		[CLK_AP_TMR2_EB]	= &ap_tmr2_eb.common.hw,
+		[CLK_DISP_EMC_EB]	= &disp_emc_eb.common.hw,
+		[CLK_ZIP_EMC_EB]	= &zip_emc_eb.common.hw,
+		[CLK_GSP_EMC_EB]	= &gsp_emc_eb.common.hw,
+		[CLK_MM_VSP_EB]		= &mm_vsp_eb.common.hw,
+		[CLK_MDAR_EB]		= &mdar_eb.common.hw,
+		[CLK_RTC4M0_CAL_EB]	= &rtc4m0_cal_eb.common.hw,
+		[CLK_RTC4M1_CAL_EB]	= &rtc4m1_cal_eb.common.hw,
+		[CLK_DJTAG_EB]		= &djtag_eb.common.hw,
+		[CLK_MBOX_EB]		= &mbox_eb.common.hw,
+		[CLK_AON_DMA_EB]	= &aon_dma_eb.common.hw,
+		[CLK_AON_APB_DEF_EB]	= &aon_apb_def_eb.common.hw,
+		[CLK_CA5_TS0_EB]	= &ca5_ts0_eb.common.hw,
+		[CLK_DBG_EB]		= &dbg_eb.common.hw,
+		[CLK_DBG_EMC_EB]	= &dbg_emc_eb.common.hw,
+		[CLK_CROSS_TRIG_EB]	= &cross_trig_eb.common.hw,
+		[CLK_SERDES_DPHY_EB]	= &serdes_dphy_eb.common.hw,
+		[CLK_ARCH_RTC_EB]	= &arch_rtc_eb.common.hw,
+		[CLK_KPD_RTC_EB]	= &kpd_rtc_eb.common.hw,
+		[CLK_AON_SYST_RTC_EB]	= &aon_syst_rtc_eb.common.hw,
+		[CLK_AP_SYST_RTC_EB]	= &ap_syst_rtc_eb.common.hw,
+		[CLK_AON_TMR_RTC_EB]	= &aon_tmr_rtc_eb.common.hw,
+		[CLK_AP_TMR0_RTC_EB]	= &ap_tmr0_rtc_eb.common.hw,
+		[CLK_EIC_RTC_EB]	= &eic_rtc_eb.common.hw,
+		[CLK_EIC_RTCDV5_EB]	= &eic_rtcdv5_eb.common.hw,
+		[CLK_AP_WDG_RTC_EB]	= &ap_wdg_rtc_eb.common.hw,
+		[CLK_CA53_WDG_RTC_EB]	= &ca53_wdg_rtc_eb.common.hw,
+		[CLK_THM_RTC_EB]	= &thm_rtc_eb.common.hw,
+		[CLK_ATHMA_RTC_EB]	= &athma_rtc_eb.common.hw,
+		[CLK_GTHMA_RTC_EB]	= &gthma_rtc_eb.common.hw,
+		[CLK_ATHMA_RTC_A_EB]	= &athma_rtc_a_eb.common.hw,
+		[CLK_GTHMA_RTC_A_EB]	= &gthma_rtc_a_eb.common.hw,
+		[CLK_AP_TMR1_RTC_EB]	= &ap_tmr1_rtc_eb.common.hw,
+		[CLK_AP_TMR2_RTC_EB]	= &ap_tmr2_rtc_eb.common.hw,
+		[CLK_DXCO_LC_RTC_EB]	= &dxco_lc_rtc_eb.common.hw,
+		[CLK_BB_CAL_RTC_EB]	= &bb_cal_rtc_eb.common.hw,
+		[CLK_GNU_EB]		= &gpu_eb.common.hw,
+		[CLK_DISP_EB]		= &disp_eb.common.hw,
+		[CLK_MM_EMC_EB]		= &mm_emc_eb.common.hw,
+		[CLK_POWER_CPU_EB]	= &power_cpu_eb.common.hw,
+		[CLK_HW_I2C_EB]		= &hw_i2c_eb.common.hw,
+		[CLK_MM_VSP_EMC_EB]	= &mm_vsp_emc_eb.common.hw,
+		[CLK_VSP_EB]		= &vsp_eb.common.hw,
+		[CLK_CSSYS_EB]		= &cssys_eb.common.hw,
+		[CLK_DMC_EB]		= &dmc_eb.common.hw,
+		[CLK_ROSC_EB]		= &rosc_eb.common.hw,
+		[CLK_S_D_CFG_EB]	= &s_d_cfg_eb.common.hw,
+		[CLK_S_D_REF_EB]	= &s_d_ref_eb.common.hw,
+		[CLK_B_DMA_EB]		= &b_dma_eb.common.hw,
+		[CLK_ANLG_EB]		= &anlg_eb.common.hw,
+		[CLK_ANLG_APB_EB]	= &anlg_apb_eb.common.hw,
+		[CLK_BSMTMR_EB]		= &bsmtmr_eb.common.hw,
+		[CLK_AP_AXI_EB]		= &ap_axi_eb.common.hw,
+		[CLK_AP_INTC0_EB]	= &ap_intc0_eb.common.hw,
+		[CLK_AP_INTC1_EB]	= &ap_intc1_eb.common.hw,
+		[CLK_AP_INTC2_EB]	= &ap_intc2_eb.common.hw,
+		[CLK_AP_INTC3_EB]	= &ap_intc3_eb.common.hw,
+		[CLK_AP_INTC4_EB]	= &ap_intc4_eb.common.hw,
+		[CLK_AP_INTC5_EB]	= &ap_intc5_eb.common.hw,
+		[CLK_SCC_EB]		= &scc_eb.common.hw,
+		[CLK_DPHY_CFG_EB]	= &dphy_cfg_eb.common.hw,
+		[CLK_DPHY_REF_EB]	= &dphy_ref_eb.common.hw,
+		[CLK_CPHY_CFG_EB]	= &cphy_cfg_eb.common.hw,
+		[CLK_OTG_REF_EB]	= &otg_ref_eb.common.hw,
+		[CLK_SERDES_EB]		= &serdes_eb.common.hw,
+		[CLK_AON_AP_EMC_EB]	= &aon_ap_emc_eb.common.hw,
+	},
+	.num	= CLK_AON_APB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_aonapb_gate_desc = {
+	.clk_clks	= sc9863a_aonapb_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_aonapb_gate_clks),
+	.hw_clks	= &sc9863a_aonapb_gate_hws,
+};
+
+/* mm gate clocks */
+static SPRD_SC_GATE_CLK_HW(mahb_ckg_eb, "mahb-ckg-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mdcam_eb, "mdcam-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK_HW(misp_eb, "misp-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mahbcsi_eb, "mahbcsi-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mcsi_s_eb, "mcsi-s-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(4), 0, 0);
+static SPRD_SC_GATE_CLK_HW(mcsi_t_eb, "mcsi-t-eb", &mm_ahb.common.hw, 0x0, 0x1000,
+			   BIT(5), 0, 0);
+static SPRD_GATE_CLK_HW(dcam_axi_eb, "dcam-axi-eb", &mm_ahb.common.hw, 0x8,
+			BIT(0), 0, 0);
+static SPRD_GATE_CLK_HW(isp_axi_eb, "isp-axi-eb", &mm_ahb.common.hw, 0x8,
+			BIT(1), 0, 0);
+static SPRD_GATE_CLK_HW(mcsi_eb, "mcsi-eb", &mm_ahb.common.hw, 0x8,
+			BIT(2), 0, 0);
+static SPRD_GATE_CLK_HW(mcsi_s_ckg_eb, "mcsi-s-ckg-eb", &mm_ahb.common.hw, 0x8,
+			BIT(3), 0, 0);
+static SPRD_GATE_CLK_HW(mcsi_t_ckg_eb, "mcsi-t-ckg-eb", &mm_ahb.common.hw, 0x8,
+			BIT(4), 0, 0);
+static SPRD_GATE_CLK_HW(sensor0_eb, "sensor0-eb", &mm_ahb.common.hw, 0x8,
+			BIT(5), 0, 0);
+static SPRD_GATE_CLK_HW(sensor1_eb, "sensor1-eb", &mm_ahb.common.hw, 0x8,
+			BIT(6), 0, 0);
+static SPRD_GATE_CLK_HW(sensor2_eb, "sensor2-eb", &mm_ahb.common.hw, 0x8,
+			BIT(7), 0, 0);
+static SPRD_GATE_CLK_HW(mcphy_cfg_eb, "mcphy-cfg-eb", &mm_ahb.common.hw, 0x8,
+			BIT(8), 0, 0);
+
+static struct sprd_clk_common *sc9863a_mm_gate_clks[] = {
+	/* address base is 0x60800000 */
+	&mahb_ckg_eb.common,
+	&mdcam_eb.common,
+	&misp_eb.common,
+	&mahbcsi_eb.common,
+	&mcsi_s_eb.common,
+	&mcsi_t_eb.common,
+	&dcam_axi_eb.common,
+	&isp_axi_eb.common,
+	&mcsi_eb.common,
+	&mcsi_s_ckg_eb.common,
+	&mcsi_t_ckg_eb.common,
+	&sensor0_eb.common,
+	&sensor1_eb.common,
+	&sensor2_eb.common,
+	&mcphy_cfg_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_mm_gate_hws = {
+	.hws	= {
+		[CLK_MAHB_CKG_EB]	= &mahb_ckg_eb.common.hw,
+		[CLK_MDCAM_EB]		= &mdcam_eb.common.hw,
+		[CLK_MISP_EB]		= &misp_eb.common.hw,
+		[CLK_MAHBCSI_EB]	= &mahbcsi_eb.common.hw,
+		[CLK_MCSI_S_EB]		= &mcsi_s_eb.common.hw,
+		[CLK_MCSI_T_EB]		= &mcsi_t_eb.common.hw,
+		[CLK_DCAM_AXI_EB]	= &dcam_axi_eb.common.hw,
+		[CLK_ISP_AXI_EB]	= &isp_axi_eb.common.hw,
+		[CLK_MCSI_EB]		= &mcsi_eb.common.hw,
+		[CLK_MCSI_S_CKG_EB]	= &mcsi_s_ckg_eb.common.hw,
+		[CLK_MCSI_T_CKG_EB]	= &mcsi_t_ckg_eb.common.hw,
+		[CLK_SENSOR0_EB]	= &sensor0_eb.common.hw,
+		[CLK_SENSOR1_EB]	= &sensor1_eb.common.hw,
+		[CLK_SENSOR2_EB]	= &sensor2_eb.common.hw,
+		[CLK_MCPHY_CFG_EB]	= &mcphy_cfg_eb.common.hw,
+	},
+	.num	= CLK_MM_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_mm_gate_desc = {
+	.clk_clks	= sc9863a_mm_gate_clks,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_mm_gate_clks),
+	.hw_clks	= &sc9863a_mm_gate_hws,
+};
+
+static SPRD_SC_GATE_CLK_FW_NAME(sim0_eb,	"sim0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(0), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(iis0_eb,	"iis0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(1), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(iis1_eb,	"iis1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(2), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(iis2_eb,	"iis2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(3), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi0_eb,	"spi0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(5), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi1_eb,	"spi1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(6), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi2_eb,	"spi2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(7), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c0_eb,	"i2c0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(8), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c1_eb,	"i2c1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(9), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c2_eb,	"i2c2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(10), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c3_eb,	"i2c3-eb",	"ext-26m", 0x0,
+				0x1000, BIT(11), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c4_eb,	"i2c4-eb",	"ext-26m", 0x0,
+				0x1000, BIT(12), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart0_eb,	"uart0-eb",	"ext-26m", 0x0,
+				0x1000, BIT(13), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart1_eb,	"uart1-eb",	"ext-26m", 0x0,
+				0x1000, BIT(14), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart2_eb,	"uart2-eb",	"ext-26m", 0x0,
+				0x1000, BIT(15), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart3_eb,	"uart3-eb",	"ext-26m", 0x0,
+				0x1000, BIT(16), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(uart4_eb,	"uart4-eb",	"ext-26m", 0x0,
+				0x1000, BIT(17), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(sim0_32k_eb,	"sim0_32k-eb",	"ext-26m", 0x0,
+				0x1000, BIT(18), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(spi3_eb,	"spi3-eb",	"ext-26m", 0x0,
+				0x1000, BIT(19), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c5_eb,	"i2c5-eb",	"ext-26m", 0x0,
+				0x1000, BIT(20), 0, 0);
+static SPRD_SC_GATE_CLK_FW_NAME(i2c6_eb,	"i2c6-eb",	"ext-26m", 0x0,
+				0x1000, BIT(21), 0, 0);
+
+static struct sprd_clk_common *sc9863a_apapb_gate[] = {
+	/* address base is 0x71300000 */
+	&sim0_eb.common,
+	&iis0_eb.common,
+	&iis1_eb.common,
+	&iis2_eb.common,
+	&spi0_eb.common,
+	&spi1_eb.common,
+	&spi2_eb.common,
+	&i2c0_eb.common,
+	&i2c1_eb.common,
+	&i2c2_eb.common,
+	&i2c3_eb.common,
+	&i2c4_eb.common,
+	&uart0_eb.common,
+	&uart1_eb.common,
+	&uart2_eb.common,
+	&uart3_eb.common,
+	&uart4_eb.common,
+	&sim0_32k_eb.common,
+	&spi3_eb.common,
+	&i2c5_eb.common,
+	&i2c6_eb.common,
+};
+
+static struct clk_hw_onecell_data sc9863a_apapb_gate_hws = {
+	.hws	= {
+		[CLK_SIM0_EB]		= &sim0_eb.common.hw,
+		[CLK_IIS0_EB]		= &iis0_eb.common.hw,
+		[CLK_IIS1_EB]		= &iis1_eb.common.hw,
+		[CLK_IIS2_EB]		= &iis2_eb.common.hw,
+		[CLK_SPI0_EB]		= &spi0_eb.common.hw,
+		[CLK_SPI1_EB]		= &spi1_eb.common.hw,
+		[CLK_SPI2_EB]		= &spi2_eb.common.hw,
+		[CLK_I2C0_EB]		= &i2c0_eb.common.hw,
+		[CLK_I2C1_EB]		= &i2c1_eb.common.hw,
+		[CLK_I2C2_EB]		= &i2c2_eb.common.hw,
+		[CLK_I2C3_EB]		= &i2c3_eb.common.hw,
+		[CLK_I2C4_EB]		= &i2c4_eb.common.hw,
+		[CLK_UART0_EB]		= &uart0_eb.common.hw,
+		[CLK_UART1_EB]		= &uart1_eb.common.hw,
+		[CLK_UART2_EB]		= &uart2_eb.common.hw,
+		[CLK_UART3_EB]		= &uart3_eb.common.hw,
+		[CLK_UART4_EB]		= &uart4_eb.common.hw,
+		[CLK_SIM0_32K_EB]	= &sim0_32k_eb.common.hw,
+		[CLK_SPI3_EB]		= &spi3_eb.common.hw,
+		[CLK_I2C5_EB]		= &i2c5_eb.common.hw,
+		[CLK_I2C6_EB]		= &i2c6_eb.common.hw,
+	},
+	.num	= CLK_AP_APB_GATE_NUM,
+};
+
+static const struct sprd_clk_desc sc9863a_apapb_gate_desc = {
+	.clk_clks	= sc9863a_apapb_gate,
+	.num_clk_clks	= ARRAY_SIZE(sc9863a_apapb_gate),
+	.hw_clks	= &sc9863a_apapb_gate_hws,
+};
+
+static const struct of_device_id sprd_sc9863a_clk_ids[] = {
+	{ .compatible = "sprd,sc9863a-ap-clk",	/* 0x21500000 */
+	  .data = &sc9863a_ap_clk_desc },
+	{ .compatible = "sprd,sc9863a-pmu-gate",	/* 0x402b0000 */
+	  .data = &sc9863a_pmu_gate_desc },
+	{ .compatible = "sprd,sc9863a-pll",	/* 0x40353000 */
+	  .data = &sc9863a_pll_desc },
+	{ .compatible = "sprd,sc9863a-mpll",	/* 0x40359000 */
+	  .data = &sc9863a_mpll_desc },
+	{ .compatible = "sprd,sc9863a-rpll",	/* 0x4035c000 */
+	  .data = &sc9863a_rpll_desc },
+	{ .compatible = "sprd,sc9863a-dpll",	/* 0x40363000 */
+	  .data = &sc9863a_dpll_desc },
+	{ .compatible = "sprd,sc9863a-aon-clk",	/* 0x402d0000 */
+	  .data = &sc9863a_aon_clk_desc },
+	{ .compatible = "sprd,sc9863a-apahb-gate",	/* 0x20e00000 */
+	  .data = &sc9863a_apahb_gate_desc },
+	{ .compatible = "sprd,sc9863a-aonapb-gate",	/* 0x402e0000 */
+	  .data = &sc9863a_aonapb_gate_desc },
+	{ .compatible = "sprd,sc9863a-mm-gate",	/* 0x60800000 */
+	  .data = &sc9863a_mm_gate_desc },
+	{ .compatible = "sprd,sc9863a-apapb-gate",	/* 0x71300000 */
+	  .data = &sc9863a_apapb_gate_desc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sprd_sc9863a_clk_ids);
+
+static int sc9863a_clk_probe(struct platform_device *pdev)
+{
+	const struct sprd_clk_desc *desc;
+	int ret;
+
+	desc = device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -ENODEV;
+
+	ret = sprd_clk_regmap_init(pdev, desc);
+	if (ret)
+		return ret;
+
+	return sprd_clk_probe(&pdev->dev, desc->hw_clks);
+}
+
+static struct platform_driver sc9863a_clk_driver = {
+	.probe	= sc9863a_clk_probe,
+	.driver	= {
+		.name	= "sc9863a-clk",
+		.of_match_table	= sprd_sc9863a_clk_ids,
+	},
+};
+module_platform_driver(sc9863a_clk_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC9863A Clock Driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3-59-g8ed1b


From ba0eb9d57a3781a450b8b5eb15c497cccb18ee45 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@kernel.org>
Date: Tue, 24 Mar 2020 19:14:12 -0700
Subject: clk: tegra: Use NULL for pointer initialization

This silences a sparse warning about using a plain integer instead of
NULL for a pointer.

Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/tegra/clk-tegra210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index c6304f5e813e..defe3b7ebfa4 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2993,7 +2993,7 @@ static const char * const la_parents[] = {
 };
 
 static struct tegra_clk_periph tegra210_la =
-	TEGRA_CLK_PERIPH(29, 7, 9, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, 76, 0, NULL, 0);
+	TEGRA_CLK_PERIPH(29, 7, 9, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP, 76, 0, NULL, NULL);
 
 static __init void tegra210_periph_clk_init(void __iomem *clk_base,
 					    void __iomem *pmc_base)
-- 
cgit v1.2.3-59-g8ed1b


From 2cf7a4cbcb4e108aae666dc6a81cedf69e1cba37 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@kernel.org>
Date: Mon, 9 Mar 2020 15:12:31 -0700
Subject: clk: qcom: rpmh: Simplify clk_rpmh_bcm_send_cmd()

This function has some duplication in unlocking a mutex and returns in a
few different places. Let's use some if statements to consolidate code
and make this a bit easier to read.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
CC: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200309221232.145630-2-sboyd@kernel.org
---
 drivers/clk/qcom/clk-rpmh.c | 33 ++++++++++++++-------------------
 1 file changed, 14 insertions(+), 19 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index bfc29aec3a78..b1b277b55682 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -259,38 +259,33 @@ static int clk_rpmh_bcm_send_cmd(struct clk_rpmh *c, bool enable)
 {
 	struct tcs_cmd cmd = { 0 };
 	u32 cmd_state;
-	int ret;
+	int ret = 0;
 
 	mutex_lock(&rpmh_clk_lock);
-
-	cmd_state = 0;
 	if (enable) {
 		cmd_state = 1;
 		if (c->aggr_state)
 			cmd_state = c->aggr_state;
+	} else {
+		cmd_state = 0;
 	}
 
-	if (c->last_sent_aggr_state == cmd_state) {
-		mutex_unlock(&rpmh_clk_lock);
-		return 0;
-	}
-
-	cmd.addr = c->res_addr;
-	cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
+	if (c->last_sent_aggr_state != cmd_state) {
+		cmd.addr = c->res_addr;
+		cmd.data = BCM_TCS_CMD(1, enable, 0, cmd_state);
 
-	ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable);
-	if (ret) {
-		dev_err(c->dev, "set active state of %s failed: (%d)\n",
-			c->res_name, ret);
-		mutex_unlock(&rpmh_clk_lock);
-		return ret;
+		ret = clk_rpmh_send(c, RPMH_ACTIVE_ONLY_STATE, &cmd, enable);
+		if (ret) {
+			dev_err(c->dev, "set active state of %s failed: (%d)\n",
+				c->res_name, ret);
+		} else {
+			c->last_sent_aggr_state = cmd_state;
+		}
 	}
 
-	c->last_sent_aggr_state = cmd_state;
-
 	mutex_unlock(&rpmh_clk_lock);
 
-	return 0;
+	return ret;
 }
 
 static int clk_rpmh_bcm_prepare(struct clk_hw *hw)
-- 
cgit v1.2.3-59-g8ed1b


From 751d7923434f60bdb8507ce27651f5737bb59a74 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@kernel.org>
Date: Mon, 9 Mar 2020 15:12:32 -0700
Subject: clk: qcom: rpmh: Drop unnecessary semicolons

Some functions end in }; which is just bad style. Remove the extra
semicolon.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200309221232.145630-3-sboyd@kernel.org
---
 drivers/clk/qcom/clk-rpmh.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index b1b277b55682..e2c669b08aff 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -227,7 +227,7 @@ static int clk_rpmh_prepare(struct clk_hw *hw)
 	mutex_unlock(&rpmh_clk_lock);
 
 	return ret;
-};
+}
 
 static void clk_rpmh_unprepare(struct clk_hw *hw)
 {
@@ -293,14 +293,14 @@ static int clk_rpmh_bcm_prepare(struct clk_hw *hw)
 	struct clk_rpmh *c = to_clk_rpmh(hw);
 
 	return clk_rpmh_bcm_send_cmd(c, true);
-};
+}
 
 static void clk_rpmh_bcm_unprepare(struct clk_hw *hw)
 {
 	struct clk_rpmh *c = to_clk_rpmh(hw);
 
 	clk_rpmh_bcm_send_cmd(c, false);
-};
+}
 
 static int clk_rpmh_bcm_set_rate(struct clk_hw *hw, unsigned long rate,
 				 unsigned long parent_rate)
@@ -316,7 +316,7 @@ static int clk_rpmh_bcm_set_rate(struct clk_hw *hw, unsigned long rate,
 		clk_rpmh_bcm_send_cmd(c, true);
 
 	return 0;
-};
+}
 
 static long clk_rpmh_round_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long *parent_rate)
-- 
cgit v1.2.3-59-g8ed1b


From 39d1c90665e3ee471b3005780a7df58bb1ba622d Mon Sep 17 00:00:00 2001
From: Chunyan Zhang <chunyan.zhang@unisoc.com>
Date: Mon, 30 Mar 2020 10:16:40 +0800
Subject: clk: sprd: fix to get a correct ibias of pll

The current driver is getting a wrong ibias index of pll clocks from
number 1. This patch fix that issue, then getting ibias index from 0.

Fixes: 3e37b005580b ("clk: sprd: add adjustable pll support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200330021640.14133-1-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/sprd/pll.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c
index 640270f51aa5..15791484388f 100644
--- a/drivers/clk/sprd/pll.c
+++ b/drivers/clk/sprd/pll.c
@@ -87,11 +87,12 @@ static u32 pll_get_ibias(u64 rate, const u64 *table)
 {
 	u32 i, num = table[0];
 
-	for (i = 1; i < num + 1; i++)
-		if (rate <= table[i])
+	/* table[0] indicates the number of items in this table */
+	for (i = 0; i < num; i++)
+		if (rate <= table[i + 1])
 			break;
 
-	return (i == num + 1) ? num : i;
+	return i == num ? num - 1 : i;
 }
 
 static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
-- 
cgit v1.2.3-59-g8ed1b