From ea662d2f804ad13c3c92c75c7dc1abad30e31c31 Mon Sep 17 00:00:00 2001
From: Anson Huang <anson.huang@nxp.com>
Date: Fri, 19 Oct 2018 01:05:36 +0000
Subject: clk: imx7d: remove UART1 clock setting

There are clock assignments in all i.MX7D dtb files for UART1,
below is the example in imx7d-sdb.dts, so setting UART1 clock
in clock driver is NOT necessary, actually, module clocks setting
should be done in module driver.

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
	status = "okay";
};

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk-imx7d.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
index adb08f64c691..06c105d580a4 100644
--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -886,9 +886,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
 	clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
 
-	/* set uart module clock's parent clock source that must be great then 80MHz */
-	clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
-
 	/* Set clock rate for USBPHY, the USB_PLL at CCM is from USBOTG2 */
 	clks[IMX7D_USB1_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb1_main_clk", "osc", 20, 1);
 	clks[IMX7D_USB_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb_main_clk", "osc", 20, 1);
-- 
cgit v1.2.3-59-g8ed1b


From d3ff9728134eeaa13d5bbb23c3f2e188f99cfdf9 Mon Sep 17 00:00:00 2001
From: Abel Vesa <abel.vesa@nxp.com>
Date: Sat, 1 Dec 2018 10:52:14 +0000
Subject: clk: imx: Add imx composite clock

Since a lot of clocks on imx8m are formed by a mux, gate, predivider and
divider, the idea here is to combine all of those into one composite clock,
but we need to deal with both predivider and divider at the same time and
therefore we add the imx8m_clk_composite_divider_ops and register
the composite clock with those.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile           |   1 +
 drivers/clk/imx/clk-composite-8m.c | 178 +++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h              |  16 ++++
 3 files changed, 195 insertions(+)
 create mode 100644 drivers/clk/imx/clk-composite-8m.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 8c3baa7e6496..2288e5b3912f 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -3,6 +3,7 @@
 obj-y += \
 	clk.o \
 	clk-busy.o \
+	clk-composite-8m.o \
 	clk-cpu.o \
 	clk-fixup-div.o \
 	clk-fixup-mux.o \
diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
new file mode 100644
index 000000000000..6d9d3714b4df
--- /dev/null
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+
+#include "clk.h"
+
+#define PCG_PREDIV_SHIFT	16
+#define PCG_PREDIV_WIDTH	3
+#define PCG_PREDIV_MAX		8
+
+#define PCG_DIV_SHIFT		0
+#define PCG_DIV_WIDTH		6
+#define PCG_DIV_MAX		64
+
+#define PCG_PCS_SHIFT		24
+#define PCG_PCS_MASK		0x7
+
+#define PCG_CGC_SHIFT		28
+
+static unsigned long imx8m_clk_composite_divider_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	unsigned long prediv_rate;
+	unsigned int prediv_value;
+	unsigned int div_value;
+
+	prediv_value = readl(divider->reg) >> divider->shift;
+	prediv_value &= clk_div_mask(divider->width);
+
+	prediv_rate = divider_recalc_rate(hw, parent_rate, prediv_value,
+						NULL, divider->flags,
+						divider->width);
+
+	div_value = readl(divider->reg) >> PCG_DIV_SHIFT;
+	div_value &= clk_div_mask(PCG_DIV_WIDTH);
+
+	return divider_recalc_rate(hw, prediv_rate, div_value, NULL,
+				   divider->flags, PCG_DIV_WIDTH);
+}
+
+static int imx8m_clk_composite_compute_dividers(unsigned long rate,
+						unsigned long parent_rate,
+						int *prediv, int *postdiv)
+{
+	int div1, div2;
+	int error = INT_MAX;
+	int ret = -EINVAL;
+
+	*prediv = 1;
+	*postdiv = 1;
+
+	for (div1 = 1; div1 <= PCG_PREDIV_MAX; div1++) {
+		for (div2 = 1; div2 <= PCG_DIV_MAX; div2++) {
+			int new_error = ((parent_rate / div1) / div2) - rate;
+
+			if (abs(new_error) < abs(error)) {
+				*prediv = div1;
+				*postdiv = div2;
+				error = new_error;
+				ret = 0;
+			}
+		}
+	}
+	return ret;
+}
+
+static long imx8m_clk_composite_divider_round_rate(struct clk_hw *hw,
+						unsigned long rate,
+						unsigned long *prate)
+{
+	int prediv_value;
+	int div_value;
+
+	imx8m_clk_composite_compute_dividers(rate, *prate,
+						&prediv_value, &div_value);
+	rate = DIV_ROUND_UP(*prate, prediv_value);
+
+	return DIV_ROUND_UP(rate, div_value);
+
+}
+
+static int imx8m_clk_composite_divider_set_rate(struct clk_hw *hw,
+					unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	unsigned long flags = 0;
+	int prediv_value;
+	int div_value;
+	int ret = 0;
+	u32 val;
+
+	ret = imx8m_clk_composite_compute_dividers(rate, parent_rate,
+						&prediv_value, &div_value);
+	if (ret)
+		return -EINVAL;
+
+	spin_lock_irqsave(divider->lock, flags);
+
+	val = readl(divider->reg);
+	val &= ~((clk_div_mask(divider->width) << divider->shift) |
+			(clk_div_mask(PCG_DIV_WIDTH) << PCG_DIV_SHIFT));
+
+	val |= (u32)(prediv_value  - 1) << divider->shift;
+	val |= (u32)(div_value - 1) << PCG_DIV_SHIFT;
+	writel(val, divider->reg);
+
+	spin_unlock_irqrestore(divider->lock, flags);
+
+	return ret;
+}
+
+static const struct clk_ops imx8m_clk_composite_divider_ops = {
+	.recalc_rate = imx8m_clk_composite_divider_recalc_rate,
+	.round_rate = imx8m_clk_composite_divider_round_rate,
+	.set_rate = imx8m_clk_composite_divider_set_rate,
+};
+
+struct clk *imx8m_clk_composite_flags(const char *name,
+					const char **parent_names,
+					int num_parents, void __iomem *reg,
+					unsigned long flags)
+{
+	struct clk_hw *hw = ERR_PTR(-ENOMEM), *mux_hw;
+	struct clk_hw *div_hw, *gate_hw;
+	struct clk_divider *div = NULL;
+	struct clk_gate *gate = NULL;
+	struct clk_mux *mux = NULL;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		goto fail;
+
+	mux_hw = &mux->hw;
+	mux->reg = reg;
+	mux->shift = PCG_PCS_SHIFT;
+	mux->mask = PCG_PCS_MASK;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		goto fail;
+
+	div_hw = &div->hw;
+	div->reg = reg;
+	div->shift = PCG_PREDIV_SHIFT;
+	div->width = PCG_PREDIV_WIDTH;
+	div->lock = &imx_ccm_lock;
+	div->flags = CLK_DIVIDER_ROUND_CLOSEST;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		goto fail;
+
+	gate_hw = &gate->hw;
+	gate->reg = reg;
+	gate->bit_idx = PCG_CGC_SHIFT;
+
+	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+			mux_hw, &clk_mux_ops, div_hw,
+			&imx8m_clk_composite_divider_ops,
+			gate_hw, &clk_gate_ops, flags);
+	if (IS_ERR(hw))
+		goto fail;
+
+	return hw->clk;
+
+fail:
+	kfree(gate);
+	kfree(div);
+	kfree(mux);
+	return ERR_CAST(hw);
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 5895e2237b6c..3bd4cd330c97 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -227,4 +227,20 @@ struct clk *imx_clk_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
 
+struct clk *imx8m_clk_composite_flags(const char *name,
+					const char **parent_names,
+					int num_parents, void __iomem *reg,
+					unsigned long flags);
+
+#define __imx8m_clk_composite(name, parent_names, reg, flags) \
+	imx8m_clk_composite_flags(name, parent_names, \
+		ARRAY_SIZE(parent_names), reg, \
+		flags | CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE)
+
+#define imx8m_clk_composite(name, parent_names, reg) \
+	__imx8m_clk_composite(name, parent_names, reg, 0)
+
+#define imx8m_clk_composite_critical(name, parent_names, reg) \
+	__imx8m_clk_composite(name, parent_names, reg, CLK_IS_CRITICAL)
+
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From b80522040cd3f0944410a6635ceda111a6d651be Mon Sep 17 00:00:00 2001
From: Abel Vesa <abel.vesa@nxp.com>
Date: Sat, 1 Dec 2018 10:52:15 +0000
Subject: clk: imx: Add clock driver for i.MX8MQ CCM

Add driver for the Clock Control Module found on i.MX8MQ.

Signed-off-by: Anson Huang <anson.huang@nxp.com>
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile     |   1 +
 drivers/clk/imx/clk-imx8mq.c | 589 +++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h        |  36 +++
 3 files changed, 626 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx8mq.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 2288e5b3912f..3e2492a814a7 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -27,4 +27,5 @@ obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
+obj-$(CONFIG_SOC_IMX8MQ) += clk-imx8mq.o
 obj-$(CONFIG_SOC_VF610)  += clk-vf610.o
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
new file mode 100644
index 000000000000..26b57f43ccc3
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 NXP.
+ * Copyright (C) 2017 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <dt-bindings/clock/imx8mq-clock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+
+#include "clk.h"
+
+static u32 share_count_sai1;
+static u32 share_count_sai2;
+static u32 share_count_sai3;
+static u32 share_count_sai4;
+static u32 share_count_sai5;
+static u32 share_count_sai6;
+static u32 share_count_dcss;
+static u32 share_count_nand;
+
+static struct clk *clks[IMX8MQ_CLK_END];
+
+static const char *pll_ref_sels[] = { "osc_25m", "osc_27m", "dummy", "dummy", };
+static const char *arm_pll_bypass_sels[] = {"arm_pll", "arm_pll_ref_sel", };
+static const char *gpu_pll_bypass_sels[] = {"gpu_pll", "gpu_pll_ref_sel", };
+static const char *vpu_pll_bypass_sels[] = {"vpu_pll", "vpu_pll_ref_sel", };
+static const char *audio_pll1_bypass_sels[] = {"audio_pll1", "audio_pll1_ref_sel", };
+static const char *audio_pll2_bypass_sels[] = {"audio_pll2", "audio_pll2_ref_sel", };
+static const char *video_pll1_bypass_sels[] = {"video_pll1", "video_pll1_ref_sel", };
+
+static const char *sys1_pll1_out_sels[] = {"sys1_pll1", "sys1_pll1_ref_sel", };
+static const char *sys2_pll1_out_sels[] = {"sys2_pll1", "sys1_pll1_ref_sel", };
+static const char *sys3_pll1_out_sels[] = {"sys3_pll1", "sys3_pll1_ref_sel", };
+static const char *dram_pll1_out_sels[] = {"dram_pll1", "dram_pll1_ref_sel", };
+
+static const char *sys1_pll2_out_sels[] = {"sys1_pll2_div", "sys1_pll1_ref_sel", };
+static const char *sys2_pll2_out_sels[] = {"sys2_pll2_div", "sys2_pll1_ref_sel", };
+static const char *sys3_pll2_out_sels[] = {"sys3_pll2_div", "sys2_pll1_ref_sel", };
+static const char *dram_pll2_out_sels[] = {"dram_pll2_div", "dram_pll1_ref_sel", };
+
+/* CCM ROOT */
+static const char *imx8mq_a53_sels[] = {"osc_25m", "arm_pll_out", "sys2_pll_500m", "sys2_pll_1000m",
+					"sys1_pll_800m", "sys1_pll_400m", "audio_pll1_out", "sys3_pll2_out", };
+
+static const char *imx8mq_vpu_sels[] = {"osc_25m", "arm_pll_out", "sys2_pll_500m", "sys2_pll_1000m",
+					"sys1_pll_800m", "sys1_pll_400m", "audio_pll1_out", "vpu_pll_out", };
+
+static const char *imx8mq_gpu_core_sels[] = {"osc_25m", "gpu_pll_out", "sys1_pll_800m", "sys3_pll2_out",
+					     "sys2_pll_1000m", "audio_pll1_out", "video_pll1_out", "audio_pll2_out", };
+
+static const char *imx8mq_gpu_shader_sels[] = {"osc_25m", "gpu_pll_out", "sys1_pll_800m", "sys3_pll2_out",
+					       "sys2_pll_1000m", "audio_pll1_out", "video_pll1_out", "audio_pll2_out", };
+
+static const char *imx8mq_main_axi_sels[] = {"osc_25m", "sys2_pll_333m", "sys1_pll_800m", "sys2_pll_250m",
+					     "sys2_pll_1000m", "audio_pll1_out", "video_pll1_out", "sys1_pll_100m",};
+
+static const char *imx8mq_enet_axi_sels[] = {"osc_25m", "sys1_pll_266m", "sys1_pll_800m", "sys2_pll_250m",
+					     "sys2_pll_200m", "audio_pll1_out", "video_pll1_out", "sys3_pll2_out", };
+
+static const char *imx8mq_nand_usdhc_sels[] = {"osc_25m", "sys1_pll_266m", "sys1_pll_800m", "sys2_pll_200m",
+					       "sys1_pll_133m", "sys3_pll2_out", "sys2_pll_250m", "audio_pll1_out", };
+
+static const char *imx8mq_vpu_bus_sels[] = {"osc_25m", "sys1_pll_800m", "vpu_pll_out", "audio_pll2_out", "sys3_pll2_out", "sys2_pll_1000m", "sys2_pll_200m", "sys1_pll_100m", };
+
+static const char *imx8mq_disp_axi_sels[] = {"osc_25m", "sys2_pll_125m", "sys1_pll_800m", "sys3_pll2_out", "sys1_pll_400m", "audio_pll2_out", "clk_ext1", "clk_ext4", };
+
+static const char *imx8mq_disp_apb_sels[] = {"osc_25m", "sys2_pll_125m", "sys1_pll_800m", "sys3_pll2_out",
+					     "sys1_pll_40m", "audio_pll2_out", "clk_ext1", "clk_ext3", };
+
+static const char *imx8mq_disp_rtrm_sels[] = {"osc_25m", "sys1_pll_800m", "sys2_pll_200m", "sys1_pll_400m",
+					      "audio_pll1_out", "video_pll1_out", "clk_ext2", "clk_ext3", };
+
+static const char *imx8mq_usb_bus_sels[] = {"osc_25m", "sys2_pll_500m", "sys1_pll_800m", "sys2_pll_100m",
+					    "sys2_pll_200m", "clk_ext2", "clk_ext4", "audio_pll2_out", };
+
+static const char *imx8mq_gpu_axi_sels[] = {"osc_25m", "sys1_pll_800m", "gpu_pll_out", "sys3_pll2_out", "sys2_pll_1000m",
+					    "audio_pll1_out", "video_pll1_out", "audio_pll2_out", };
+
+static const char *imx8mq_gpu_ahb_sels[] = {"osc_25m", "sys1_pll_800m", "gpu_pll_out", "sys3_pll2_out", "sys2_pll_1000m",
+					    "audio_pll1_out", "video_pll1_out", "audio_pll2_out", };
+
+static const char *imx8mq_noc_sels[] = {"osc_25m", "sys1_pll_800m", "sys3_pll2_out", "sys2_pll_1000m", "sys2_pll_500m",
+					"audio_pll1_out", "video_pll1_out", "audio_pll2_out", };
+
+static const char *imx8mq_noc_apb_sels[] = {"osc_25m", "sys1_pll_400m", "sys3_pll2_out", "sys2_pll_333m", "sys2_pll_200m",
+					    "sys1_pll_800m", "audio_pll1_out", "video_pll1_out", };
+
+static const char *imx8mq_ahb_sels[] = {"osc_25m", "sys1_pll_133m", "sys1_pll_800m", "sys1_pll_400m",
+					"sys2_pll_125m", "sys3_pll2_out", "audio_pll1_out", "video_pll1_out", };
+
+static const char *imx8mq_audio_ahb_sels[] = {"osc_25m", "sys2_pll_500m", "sys1_pll_800m", "sys2_pll_1000m",
+						  "sys2_pll_166m", "sys3_pll2_out", "audio_pll1_out", "video_pll1_out", };
+
+static const char *imx8mq_dsi_ahb_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_80m", "sys1_pll_800m",
+						"sys2_pll_1000m", "sys3_pll2_out", "clk_ext3", "audio_pll2_out"};
+
+static const char *imx8mq_dram_alt_sels[] = {"osc_25m", "sys1_pll_800m", "sys1_pll_100m", "sys2_pll_500m",
+						"sys2_pll_250m", "sys1_pll_400m", "audio_pll1_out", "sys1_pll_266m", };
+
+static const char *imx8mq_dram_apb_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_40m", "sys1_pll_160m",
+						"sys1_pll_800m", "sys3_pll2_out", "sys2_pll_250m", "audio_pll2_out", };
+
+static const char *imx8mq_vpu_g1_sels[] = {"osc_25m", "vpu_pll_out", "sys1_pll_800m", "sys2_pll_1000m", "sys1_pll_100m", "sys2_pll_125m", "sys3_pll2_out", "audio_pll1_out", };
+
+static const char *imx8mq_vpu_g2_sels[] = {"osc_25m", "vpu_pll_out", "sys1_pll_800m", "sys2_pll_1000m", "sys1_pll_100m", "sys2_pll_125m", "sys3_pll2_out", "audio_pll1_out", };
+
+static const char *imx8mq_disp_dtrc_sels[] = {"osc_25m", "vpu_pll_out", "sys1_pll_800m", "sys2_pll_1000m", "sys1_pll_160m", "sys2_pll_100m", "sys3_pll2_out", "audio_pll2_out", };
+
+static const char *imx8mq_disp_dc8000_sels[] = {"osc_25m", "vpu_pll_out", "sys1_pll_800m", "sys2_pll_1000m", "sys1_pll_160m", "sys2_pll_100m", "sys3_pll2_out", "audio_pll2_out", };
+
+static const char *imx8mq_pcie1_ctrl_sels[] = {"osc_25m", "sys2_pll_250m", "sys2_pll_200m", "sys1_pll_266m",
+					       "sys1_pll_800m", "sys2_pll_500m", "sys2_pll_250m", "sys3_pll2_out", };
+
+static const char *imx8mq_pcie1_phy_sels[] = {"osc_25m", "sys2_pll_100m", "sys2_pll_500m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4", };
+
+static const char *imx8mq_pcie1_aux_sels[] = {"osc_25m", "sys2_pll_200m", "sys2_pll_500m", "sys3_pll2_out",
+					      "sys2_pll_100m", "sys1_pll_80m", "sys1_pll_160m", "sys1_pll_200m", };
+
+static const char *imx8mq_dc_pixel_sels[] = {"osc_25m", "video_pll1_out", "audio_pll2_out", "audio_pll1_out", "sys1_pll_800m", "sys2_pll_1000m", "sys3_pll2_out", "clk_ext4", };
+
+static const char *imx8mq_lcdif_pixel_sels[] = {"osc_25m", "video_pll1_out", "audio_pll2_out", "audio_pll1_out", "sys1_pll_800m", "sys2_pll_1000m", "sys3_pll2_out", "clk_ext4", };
+
+static const char *imx8mq_sai1_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext1", "clk_ext2", };
+
+static const char *imx8mq_sai2_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext2", "clk_ext3", };
+
+static const char *imx8mq_sai3_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext3", "clk_ext4", };
+
+static const char *imx8mq_sai4_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext1", "clk_ext2", };
+
+static const char *imx8mq_sai5_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext2", "clk_ext3", };
+
+static const char *imx8mq_sai6_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext3", "clk_ext4", };
+
+static const char *imx8mq_spdif1_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext2", "clk_ext3", };
+
+static const char *imx8mq_spdif2_sels[] = {"osc_25m", "audio_pll1_out", "audio_pll2_out", "video_pll1_out", "sys1_pll_133m", "osc_27m", "clk_ext3", "clk_ext4", };
+
+static const char *imx8mq_enet_ref_sels[] = {"osc_25m", "sys2_pll_125m", "sys2_pll_500m", "sys2_pll_100m",
+					     "sys1_pll_160m", "audio_pll1_out", "video_pll1_out", "clk_ext4", };
+
+static const char *imx8mq_enet_timer_sels[] = {"osc_25m", "sys2_pll_100m", "audio_pll1_out", "clk_ext1", "clk_ext2",
+					       "clk_ext3", "clk_ext4", "video_pll1_out", };
+
+static const char *imx8mq_enet_phy_sels[] = {"osc_25m", "sys2_pll_50m", "sys2_pll_125m", "sys2_pll_500m",
+					     "audio_pll1_out", "video_pll1_out", "audio_pll2_out", };
+
+static const char *imx8mq_nand_sels[] = {"osc_25m", "sys2_pll_500m", "audio_pll1_out", "sys1_pll_400m",
+					 "audio_pll2_out", "sys3_pll2_out", "sys2_pll_250m", "video_pll1_out", };
+
+static const char *imx8mq_qspi_sels[] = {"osc_25m", "sys1_pll_400m", "sys1_pll_800m", "sys2_pll_500m",
+					 "audio_pll2_out", "sys1_pll_266m", "sys3_pll2_out", "sys1_pll_100m", };
+
+static const char *imx8mq_usdhc1_sels[] = {"osc_25m", "sys1_pll_400m", "sys1_pll_800m", "sys2_pll_500m",
+					 "audio_pll2_out", "sys1_pll_266m", "sys3_pll2_out", "sys1_pll_100m", };
+
+static const char *imx8mq_usdhc2_sels[] = {"osc_25m", "sys1_pll_400m", "sys1_pll_800m", "sys2_pll_500m",
+					 "audio_pll2_out", "sys1_pll_266m", "sys3_pll2_out", "sys1_pll_100m", };
+
+static const char *imx8mq_i2c1_sels[] = {"osc_25m", "sys1_pll_160m", "sys2_pll_50m", "sys3_pll2_out", "audio_pll1_out",
+					 "video_pll1_out", "audio_pll2_out", "sys1_pll_133m", };
+
+static const char *imx8mq_i2c2_sels[] = {"osc_25m", "sys1_pll_160m", "sys2_pll_50m", "sys3_pll2_out", "audio_pll1_out",
+					 "video_pll1_out", "audio_pll2_out", "sys1_pll_133m", };
+
+static const char *imx8mq_i2c3_sels[] = {"osc_25m", "sys1_pll_160m", "sys2_pll_50m", "sys3_pll2_out", "audio_pll1_out",
+					 "video_pll1_out", "audio_pll2_out", "sys1_pll_133m", };
+
+static const char *imx8mq_i2c4_sels[] = {"osc_25m", "sys1_pll_160m", "sys2_pll_50m", "sys3_pll2_out", "audio_pll1_out",
+					 "video_pll1_out", "audio_pll2_out", "sys1_pll_133m", };
+
+static const char *imx8mq_uart1_sels[] = {"osc_25m", "sys1_pll_80m", "sys2_pll_200m", "sys2_pll_100m",
+					  "sys3_pll2_out", "clk_ext2", "clk_ext4", "audio_pll2_out", };
+
+static const char *imx8mq_uart2_sels[] = {"osc_25m", "sys1_pll_80m", "sys2_pll_200m", "sys2_pll_100m",
+					  "sys3_pll2_out", "clk_ext2", "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mq_uart3_sels[] = {"osc_25m", "sys1_pll_80m", "sys2_pll_200m", "sys2_pll_100m",
+					  "sys3_pll2_out", "clk_ext2", "clk_ext4", "audio_pll2_out", };
+
+static const char *imx8mq_uart4_sels[] = {"osc_25m", "sys1_pll_80m", "sys2_pll_200m", "sys2_pll_100m",
+					  "sys3_pll2_out", "clk_ext2", "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mq_usb_core_sels[] = {"osc_25m", "sys1_pll_100m", "sys1_pll_40m", "sys2_pll_100m",
+					     "sys2_pll_200m", "clk_ext2", "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mq_usb_phy_sels[] = {"osc_25m", "sys1_pll_100m", "sys1_pll_40m", "sys2_pll_100m",
+					     "sys2_pll_200m", "clk_ext2", "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mq_ecspi1_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_40m", "sys1_pll_160m",
+					   "sys1_pll_800m", "sys3_pll2_out", "sys2_pll_250m", "audio_pll2_out", };
+
+static const char *imx8mq_ecspi2_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_40m", "sys1_pll_160m",
+					   "sys1_pll_800m", "sys3_pll2_out", "sys2_pll_250m", "audio_pll2_out", };
+
+static const char *imx8mq_pwm1_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_160m", "sys1_pll_40m",
+					 "sys3_pll2_out", "clk_ext1", "sys1_pll_80m", "video_pll1_out", };
+
+static const char *imx8mq_pwm2_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_160m", "sys1_pll_40m",
+					 "sys3_pll2_out", "clk_ext1", "sys1_pll_80m", "video_pll1_out", };
+
+static const char *imx8mq_pwm3_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_160m", "sys1_pll_40m",
+					 "sys3_pll2_out", "clk_ext2", "sys1_pll_80m", "video_pll1_out", };
+
+static const char *imx8mq_pwm4_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_160m", "sys1_pll_40m",
+					 "sys3_pll2_out", "clk_ext2", "sys1_pll_80m", "video_pll1_out", };
+
+static const char *imx8mq_gpt1_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_400m", "sys1_pll_40m",
+					 "sys1_pll_80m", "audio_pll1_out", "clk_ext1", };
+
+static const char *imx8mq_wdog_sels[] = {"osc_25m", "sys1_pll_133m", "sys1_pll_160m", "vpu_pll_out",
+					 "sys2_pll_125m", "sys3_pll2_out", "sys1_pll_80m", "sys2_pll_166m", };
+
+static const char *imx8mq_wrclk_sels[] = {"osc_25m", "sys1_pll_40m", "vpu_pll_out", "sys3_pll2_out", "sys2_pll_200m",
+					  "sys1_pll_266m", "sys2_pll_500m", "sys1_pll_100m", };
+
+static const char *imx8mq_dsi_core_sels[] = {"osc_25m", "sys1_pll_266m", "sys2_pll_250m", "sys1_pll_800m",
+					     "sys2_pll_1000m", "sys3_pll2_out", "audio_pll2_out", "video_pll1_out", };
+
+static const char *imx8mq_dsi_phy_sels[] = {"osc_25m", "sys2_pll_125m", "sys2_pll_100m", "sys1_pll_800m",
+					    "sys2_pll_1000m", "clk_ext2", "audio_pll2_out", "video_pll1_out", };
+
+static const char *imx8mq_dsi_dbi_sels[] = {"osc_25m", "sys1_pll_266m", "sys2_pll_100m", "sys1_pll_800m",
+					    "sys2_pll_1000m", "sys3_pll2_out", "audio_pll2_out", "video_pll1_out", };
+
+static const char *imx8mq_dsi_esc_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_80m", "sys1_pll_800m",
+					    "sys2_pll_1000m", "sys3_pll2_out", "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mq_csi1_core_sels[] = {"osc_25m", "sys1_pll_266m", "sys2_pll_250m", "sys1_pll_800m",
+					      "sys2_pll_1000m", "sys3_pll2_out", "audio_pll2_out", "video_pll1_out", };
+
+static const char *imx8mq_csi1_phy_sels[] = {"osc_25m", "sys2_pll_125m", "sys2_pll_100m", "sys1_pll_800m",
+					     "sys2_pll_1000m", "clk_ext2", "audio_pll2_out", "video_pll1_out", };
+
+static const char *imx8mq_csi1_esc_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_80m", "sys1_pll_800m",
+					     "sys2_pll_1000m", "sys3_pll2_out", "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mq_csi2_core_sels[] = {"osc_25m", "sys1_pll_266m", "sys2_pll_250m", "sys1_pll_800m",
+					      "sys2_pll_1000m", "sys3_pll2_out", "audio_pll2_out", "video_pll1_out", };
+
+static const char *imx8mq_csi2_phy_sels[] = {"osc_25m", "sys2_pll_125m", "sys2_pll_100m", "sys1_pll_800m",
+					     "sys2_pll_1000m", "clk_ext2", "audio_pll2_out", "video_pll1_out", };
+
+static const char *imx8mq_csi2_esc_sels[] = {"osc_25m", "sys2_pll_100m", "sys1_pll_80m", "sys1_pll_800m",
+					     "sys2_pll_1000m", "sys3_pll2_out", "clk_ext3", "audio_pll2_out", };
+
+static const char *imx8mq_pcie2_ctrl_sels[] = {"osc_25m", "sys2_pll_250m", "sys2_pll_200m", "sys1_pll_266m",
+					       "sys1_pll_800m", "sys2_pll_500m", "sys2_pll_333m", "sys3_pll2_out", };
+
+static const char *imx8mq_pcie2_phy_sels[] = {"osc_25m", "sys2_pll_100m", "sys2_pll_500m", "clk_ext1",
+					      "clk_ext2", "clk_ext3", "clk_ext4", "sys1_pll_400m", };
+
+static const char *imx8mq_pcie2_aux_sels[] = {"osc_25m", "sys2_pll_200m", "sys2_pll_50m", "sys3_pll2_out",
+					      "sys2_pll_100m", "sys1_pll_80m", "sys1_pll_160m", "sys1_pll_200m", };
+
+static const char *imx8mq_ecspi3_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_40m", "sys1_pll_160m",
+					   "sys1_pll_800m", "sys3_pll2_out", "sys2_pll_250m", "audio_pll2_out", };
+static const char *imx8mq_dram_core_sels[] = {"dram_pll_out", "dram_alt_root", };
+
+static const char *imx8mq_clko2_sels[] = {"osc_25m", "sys2_pll_200m", "sys1_pll_400m", "sys2_pll_166m", "audio_pll1_out",
+					 "video_pll1_out", "ckil", };
+
+static struct clk_onecell_data clk_data;
+
+static int imx8mq_clocks_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	void __iomem *base;
+	int err;
+	int i;
+
+	clks[IMX8MQ_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
+	clks[IMX8MQ_CLK_32K] = of_clk_get_by_name(np, "ckil");
+	clks[IMX8MQ_CLK_25M] = of_clk_get_by_name(np, "osc_25m");
+	clks[IMX8MQ_CLK_27M] = of_clk_get_by_name(np, "osc_27m");
+	clks[IMX8MQ_CLK_EXT1] = of_clk_get_by_name(np, "clk_ext1");
+	clks[IMX8MQ_CLK_EXT2] = of_clk_get_by_name(np, "clk_ext2");
+	clks[IMX8MQ_CLK_EXT3] = of_clk_get_by_name(np, "clk_ext3");
+	clks[IMX8MQ_CLK_EXT4] = of_clk_get_by_name(np, "clk_ext4");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-anatop");
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return -ENOMEM;
+
+	clks[IMX8MQ_ARM_PLL_REF_SEL] = imx_clk_mux("arm_pll_ref_sel", base + 0x28, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_GPU_PLL_REF_SEL] = imx_clk_mux("gpu_pll_ref_sel", base + 0x18, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_VPU_PLL_REF_SEL] = imx_clk_mux("vpu_pll_ref_sel", base + 0x20, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_AUDIO_PLL1_REF_SEL] = imx_clk_mux("audio_pll1_ref_sel", base + 0x0, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_AUDIO_PLL2_REF_SEL] = imx_clk_mux("audio_pll2_ref_sel", base + 0x8, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_VIDEO_PLL1_REF_SEL] = imx_clk_mux("video_pll1_ref_sel", base + 0x10, 16, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_SYS1_PLL1_REF_SEL]	= imx_clk_mux("sys1_pll1_ref_sel", base + 0x30, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_SYS2_PLL1_REF_SEL]	= imx_clk_mux("sys2_pll1_ref_sel", base + 0x3c, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_SYS3_PLL1_REF_SEL]	= imx_clk_mux("sys3_pll1_ref_sel", base + 0x48, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+	clks[IMX8MQ_DRAM_PLL1_REF_SEL]	= imx_clk_mux("dram_pll1_ref_sel", base + 0x60, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+
+	clks[IMX8MQ_ARM_PLL_REF_DIV]	= imx_clk_divider("arm_pll_ref_div", "arm_pll_ref_sel", base + 0x28, 5, 6);
+	clks[IMX8MQ_GPU_PLL_REF_DIV]	= imx_clk_divider("gpu_pll_ref_div", "gpu_pll_ref_sel", base + 0x18, 5, 6);
+	clks[IMX8MQ_VPU_PLL_REF_DIV]	= imx_clk_divider("vpu_pll_ref_div", "vpu_pll_ref_sel", base + 0x20, 5, 6);
+	clks[IMX8MQ_AUDIO_PLL1_REF_DIV] = imx_clk_divider("audio_pll1_ref_div", "audio_pll1_ref_sel", base + 0x0, 5, 6);
+	clks[IMX8MQ_AUDIO_PLL2_REF_DIV] = imx_clk_divider("audio_pll2_ref_div", "audio_pll2_ref_sel", base + 0x8, 5, 6);
+	clks[IMX8MQ_VIDEO_PLL1_REF_DIV] = imx_clk_divider("video_pll1_ref_div", "video_pll1_ref_sel", base + 0x10, 5, 6);
+	clks[IMX8MQ_SYS1_PLL1_REF_DIV]	= imx_clk_divider("sys1_pll1_ref_div", "sys1_pll1_ref_sel", base + 0x38, 25, 3);
+	clks[IMX8MQ_SYS2_PLL1_REF_DIV]	= imx_clk_divider("sys2_pll1_ref_div", "sys2_pll1_ref_sel", base + 0x44, 25, 3);
+	clks[IMX8MQ_SYS3_PLL1_REF_DIV]	= imx_clk_divider("sys3_pll1_ref_div", "sys3_pll1_ref_sel", base + 0x50, 25, 3);
+	clks[IMX8MQ_DRAM_PLL1_REF_DIV]	= imx_clk_divider("dram_pll1_ref_div", "dram_pll1_ref_sel", base + 0x68, 25, 3);
+
+	clks[IMX8MQ_ARM_PLL] = imx_clk_frac_pll("arm_pll", "arm_pll_ref_div", base + 0x28);
+	clks[IMX8MQ_GPU_PLL] = imx_clk_frac_pll("gpu_pll", "gpu_pll_ref_div", base + 0x18);
+	clks[IMX8MQ_VPU_PLL] = imx_clk_frac_pll("vpu_pll", "vpu_pll_ref_div", base + 0x20);
+	clks[IMX8MQ_AUDIO_PLL1] = imx_clk_frac_pll("audio_pll1", "audio_pll1_ref_div", base + 0x0);
+	clks[IMX8MQ_AUDIO_PLL2] = imx_clk_frac_pll("audio_pll2", "audio_pll2_ref_div", base + 0x8);
+	clks[IMX8MQ_VIDEO_PLL1] = imx_clk_frac_pll("video_pll1", "video_pll1_ref_div", base + 0x10);
+	clks[IMX8MQ_SYS1_PLL1] = imx_clk_sccg_pll("sys1_pll1", "sys1_pll1_ref_div", base + 0x30, SCCG_PLL1);
+	clks[IMX8MQ_SYS2_PLL1] = imx_clk_sccg_pll("sys2_pll1", "sys2_pll1_ref_div", base + 0x3c, SCCG_PLL1);
+	clks[IMX8MQ_SYS3_PLL1] = imx_clk_sccg_pll("sys3_pll1", "sys3_pll1_ref_div", base + 0x48, SCCG_PLL1);
+	clks[IMX8MQ_DRAM_PLL1] = imx_clk_sccg_pll("dram_pll1", "dram_pll1_ref_div", base + 0x60, SCCG_PLL1);
+
+	clks[IMX8MQ_SYS1_PLL2] = imx_clk_sccg_pll("sys1_pll2", "sys1_pll1_out_div", base + 0x30, SCCG_PLL2);
+	clks[IMX8MQ_SYS2_PLL2] = imx_clk_sccg_pll("sys2_pll2", "sys2_pll1_out_div", base + 0x3c, SCCG_PLL2);
+	clks[IMX8MQ_SYS3_PLL2] = imx_clk_sccg_pll("sys3_pll2", "sys3_pll1_out_div", base + 0x48, SCCG_PLL2);
+	clks[IMX8MQ_DRAM_PLL2] = imx_clk_sccg_pll("dram_pll2", "dram_pll1_out_div", base + 0x60, SCCG_PLL2);
+
+	/* PLL divs */
+	clks[IMX8MQ_SYS1_PLL1_OUT_DIV] = imx_clk_divider("sys1_pll1_out_div", "sys1_pll1_out", base + 0x38, 19, 6);
+	clks[IMX8MQ_SYS2_PLL1_OUT_DIV] = imx_clk_divider("sys2_pll1_out_div", "sys2_pll1_out", base + 0x44, 19, 6);
+	clks[IMX8MQ_SYS3_PLL1_OUT_DIV] = imx_clk_divider("sys3_pll1_out_div", "sys3_pll1_out", base + 0x50, 19, 6);
+	clks[IMX8MQ_DRAM_PLL1_OUT_DIV] = imx_clk_divider("dram_pll1_out_div", "dram_pll1_out", base + 0x68, 19, 6);
+	clks[IMX8MQ_SYS1_PLL2_DIV] = imx_clk_divider("sys1_pll2_div", "sys1_pll2", base + 0x38, 1, 6);
+	clks[IMX8MQ_SYS2_PLL2_DIV] = imx_clk_divider("sys2_pll2_div", "sys2_pll2", base + 0x44, 1, 6);
+	clks[IMX8MQ_SYS3_PLL2_DIV] = imx_clk_divider("sys3_pll2_div", "sys3_pll2", base + 0x50, 1, 6);
+	clks[IMX8MQ_DRAM_PLL2_DIV] = imx_clk_divider("dram_pll2_div", "dram_pll2", base + 0x68, 1, 6);
+
+	/* PLL bypass out */
+	clks[IMX8MQ_ARM_PLL_BYPASS] = imx_clk_mux("arm_pll_bypass", base + 0x28, 14, 1, arm_pll_bypass_sels, ARRAY_SIZE(arm_pll_bypass_sels));
+	clks[IMX8MQ_GPU_PLL_BYPASS] = imx_clk_mux("gpu_pll_bypass", base + 0x18, 14, 1, gpu_pll_bypass_sels, ARRAY_SIZE(gpu_pll_bypass_sels));
+	clks[IMX8MQ_VPU_PLL_BYPASS] = imx_clk_mux("vpu_pll_bypass", base + 0x20, 14, 1, vpu_pll_bypass_sels, ARRAY_SIZE(vpu_pll_bypass_sels));
+	clks[IMX8MQ_AUDIO_PLL1_BYPASS] = imx_clk_mux("audio_pll1_bypass", base + 0x0, 14, 1, audio_pll1_bypass_sels, ARRAY_SIZE(audio_pll1_bypass_sels));
+	clks[IMX8MQ_AUDIO_PLL2_BYPASS] = imx_clk_mux("audio_pll2_bypass", base + 0x8, 14, 1, audio_pll2_bypass_sels, ARRAY_SIZE(audio_pll2_bypass_sels));
+	clks[IMX8MQ_VIDEO_PLL1_BYPASS] = imx_clk_mux("video_pll1_bypass", base + 0x10, 14, 1, video_pll1_bypass_sels, ARRAY_SIZE(video_pll1_bypass_sels));
+
+	clks[IMX8MQ_SYS1_PLL1_OUT] = imx_clk_mux("sys1_pll1_out", base + 0x30, 5, 1, sys1_pll1_out_sels, ARRAY_SIZE(sys1_pll1_out_sels));
+	clks[IMX8MQ_SYS2_PLL1_OUT] = imx_clk_mux("sys2_pll1_out", base + 0x3c, 5, 1, sys2_pll1_out_sels, ARRAY_SIZE(sys2_pll1_out_sels));
+	clks[IMX8MQ_SYS3_PLL1_OUT] = imx_clk_mux("sys3_pll1_out", base + 0x48, 5, 1, sys3_pll1_out_sels, ARRAY_SIZE(sys3_pll1_out_sels));
+	clks[IMX8MQ_DRAM_PLL1_OUT] = imx_clk_mux("dram_pll1_out", base + 0x60, 5, 1, dram_pll1_out_sels, ARRAY_SIZE(dram_pll1_out_sels));
+	clks[IMX8MQ_SYS1_PLL2_OUT] = imx_clk_mux("sys1_pll2_out", base + 0x30, 4, 1, sys1_pll2_out_sels, ARRAY_SIZE(sys1_pll2_out_sels));
+	clks[IMX8MQ_SYS2_PLL2_OUT] = imx_clk_mux("sys2_pll2_out", base + 0x3c, 4, 1, sys2_pll2_out_sels, ARRAY_SIZE(sys2_pll2_out_sels));
+	clks[IMX8MQ_SYS3_PLL2_OUT] = imx_clk_mux("sys3_pll2_out", base + 0x48, 4, 1, sys3_pll2_out_sels, ARRAY_SIZE(sys3_pll2_out_sels));
+	clks[IMX8MQ_DRAM_PLL2_OUT] = imx_clk_mux("dram_pll2_out", base + 0x60, 4, 1, dram_pll2_out_sels, ARRAY_SIZE(dram_pll2_out_sels));
+
+	/* PLL OUT GATE */
+	clks[IMX8MQ_ARM_PLL_OUT] = imx_clk_gate("arm_pll_out", "arm_pll_bypass", base + 0x28, 21);
+	clks[IMX8MQ_GPU_PLL_OUT] = imx_clk_gate("gpu_pll_out", "gpu_pll_bypass", base + 0x18, 21);
+	clks[IMX8MQ_VPU_PLL_OUT] = imx_clk_gate("vpu_pll_out", "vpu_pll_bypass", base + 0x20, 21);
+	clks[IMX8MQ_AUDIO_PLL1_OUT] = imx_clk_gate("audio_pll1_out", "audio_pll1_bypass", base + 0x0, 21);
+	clks[IMX8MQ_AUDIO_PLL2_OUT] = imx_clk_gate("audio_pll2_out", "audio_pll2_bypass", base + 0x8, 21);
+	clks[IMX8MQ_VIDEO_PLL1_OUT] = imx_clk_gate("video_pll1_out", "video_pll1_bypass", base + 0x10, 21);
+	clks[IMX8MQ_SYS1_PLL_OUT] = imx_clk_gate("sys1_pll_out", "sys1_pll2_out", base + 0x30, 9);
+	clks[IMX8MQ_SYS2_PLL_OUT] = imx_clk_gate("sys2_pll_out", "sys2_pll2_out", base + 0x3c, 9);
+	clks[IMX8MQ_SYS3_PLL_OUT] = imx_clk_gate("sys3_pll_out", "sys3_pll2_out", base + 0x48, 9);
+	clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_gate("dram_pll_out", "dram_pll2_out", base + 0x60, 9);
+
+	/* SYS PLL fixed output */
+	clks[IMX8MQ_SYS1_PLL_40M] = imx_clk_fixed_factor("sys1_pll_40m", "sys1_pll_out", 1, 20);
+	clks[IMX8MQ_SYS1_PLL_80M] = imx_clk_fixed_factor("sys1_pll_80m", "sys1_pll_out", 1, 10);
+	clks[IMX8MQ_SYS1_PLL_100M] = imx_clk_fixed_factor("sys1_pll_100m", "sys1_pll_out", 1, 8);
+	clks[IMX8MQ_SYS1_PLL_133M] = imx_clk_fixed_factor("sys1_pll_133m", "sys1_pll_out", 1, 6);
+	clks[IMX8MQ_SYS1_PLL_160M] = imx_clk_fixed_factor("sys1_pll_160m", "sys1_pll_out", 1, 5);
+	clks[IMX8MQ_SYS1_PLL_200M] = imx_clk_fixed_factor("sys1_pll_200m", "sys1_pll_out", 1, 4);
+	clks[IMX8MQ_SYS1_PLL_266M] = imx_clk_fixed_factor("sys1_pll_266m", "sys1_pll_out", 1, 3);
+	clks[IMX8MQ_SYS1_PLL_400M] = imx_clk_fixed_factor("sys1_pll_400m", "sys1_pll_out", 1, 2);
+	clks[IMX8MQ_SYS1_PLL_800M] = imx_clk_fixed_factor("sys1_pll_800m", "sys1_pll_out", 1, 1);
+
+	clks[IMX8MQ_SYS2_PLL_50M] = imx_clk_fixed_factor("sys2_pll_50m", "sys2_pll_out", 1, 20);
+	clks[IMX8MQ_SYS2_PLL_100M] = imx_clk_fixed_factor("sys2_pll_100m", "sys2_pll_out", 1, 10);
+	clks[IMX8MQ_SYS2_PLL_125M] = imx_clk_fixed_factor("sys2_pll_125m", "sys2_pll_out", 1, 8);
+	clks[IMX8MQ_SYS2_PLL_166M] = imx_clk_fixed_factor("sys2_pll_166m", "sys2_pll_out", 1, 6);
+	clks[IMX8MQ_SYS2_PLL_200M] = imx_clk_fixed_factor("sys2_pll_200m", "sys2_pll_out", 1, 5);
+	clks[IMX8MQ_SYS2_PLL_250M] = imx_clk_fixed_factor("sys2_pll_250m", "sys2_pll_out", 1, 4);
+	clks[IMX8MQ_SYS2_PLL_333M] = imx_clk_fixed_factor("sys2_pll_333m", "sys2_pll_out", 1, 3);
+	clks[IMX8MQ_SYS2_PLL_500M] = imx_clk_fixed_factor("sys2_pll_500m", "sys2_pll_out", 1, 2);
+	clks[IMX8MQ_SYS2_PLL_1000M] = imx_clk_fixed_factor("sys2_pll_1000m", "sys2_pll_out", 1, 1);
+
+	np = dev->of_node;
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return -ENOMEM;
+
+	/* CORE */
+	clks[IMX8MQ_CLK_A53_SRC] = imx_clk_mux2("arm_a53_src", base + 0x8000, 24, 3, imx8mq_a53_sels, ARRAY_SIZE(imx8mq_a53_sels));
+	clks[IMX8MQ_CLK_VPU_SRC] = imx_clk_mux2("vpu_src", base + 0x8100, 24, 3, imx8mq_vpu_sels, ARRAY_SIZE(imx8mq_vpu_sels));
+	clks[IMX8MQ_CLK_GPU_CORE_SRC] = imx_clk_mux2("gpu_core_src", base + 0x8180, 24, 3,  imx8mq_gpu_core_sels, ARRAY_SIZE(imx8mq_gpu_core_sels));
+	clks[IMX8MQ_CLK_GPU_SHADER_SRC] = imx_clk_mux2("gpu_shader_src", base + 0x8200, 24, 3, imx8mq_gpu_shader_sels,  ARRAY_SIZE(imx8mq_gpu_shader_sels));
+	clks[IMX8MQ_CLK_A53_CG] = imx_clk_gate3_flags("arm_a53_cg", "arm_a53_src", base + 0x8000, 28, CLK_IS_CRITICAL);
+	clks[IMX8MQ_CLK_VPU_CG] = imx_clk_gate3("vpu_cg", "vpu_src", base + 0x8100, 28);
+	clks[IMX8MQ_CLK_GPU_CORE_CG] = imx_clk_gate3("gpu_core_cg", "gpu_core_src", base + 0x8180, 28);
+	clks[IMX8MQ_CLK_GPU_SHADER_CG] = imx_clk_gate3("gpu_shader_cg", "gpu_shader_src", base + 0x8200, 28);
+
+	clks[IMX8MQ_CLK_A53_DIV] = imx_clk_divider2("arm_a53_div", "arm_a53_cg", base + 0x8000, 0, 3);
+	clks[IMX8MQ_CLK_VPU_DIV] = imx_clk_divider2("vpu_div", "vpu_cg", base + 0x8100, 0, 3);
+	clks[IMX8MQ_CLK_GPU_CORE_DIV] = imx_clk_divider2("gpu_core_div", "gpu_core_cg", base + 0x8180, 0, 3);
+	clks[IMX8MQ_CLK_GPU_SHADER_DIV] = imx_clk_divider2("gpu_shader_div", "gpu_shader_cg", base + 0x8200, 0, 3);
+
+	/* BUS */
+	clks[IMX8MQ_CLK_MAIN_AXI] = imx8m_clk_composite_critical("main_axi", imx8mq_main_axi_sels, base + 0x8800);
+	clks[IMX8MQ_CLK_ENET_AXI] = imx8m_clk_composite("enet_axi", imx8mq_enet_axi_sels, base + 0x8880);
+	clks[IMX8MQ_CLK_NAND_USDHC_BUS] = imx8m_clk_composite("nand_usdhc_bus", imx8mq_nand_usdhc_sels, base + 0x8900);
+	clks[IMX8MQ_CLK_VPU_BUS] = imx8m_clk_composite("vpu_bus", imx8mq_vpu_bus_sels, base + 0x8980);
+	clks[IMX8MQ_CLK_DISP_AXI] = imx8m_clk_composite("disp_axi", imx8mq_disp_axi_sels, base + 0x8a00);
+	clks[IMX8MQ_CLK_DISP_APB] = imx8m_clk_composite("disp_apb", imx8mq_disp_apb_sels, base + 0x8a80);
+	clks[IMX8MQ_CLK_DISP_RTRM] = imx8m_clk_composite("disp_rtrm", imx8mq_disp_rtrm_sels, base + 0x8b00);
+	clks[IMX8MQ_CLK_USB_BUS] = imx8m_clk_composite("usb_bus", imx8mq_usb_bus_sels, base + 0x8b80);
+	clks[IMX8MQ_CLK_GPU_AXI] = imx8m_clk_composite("gpu_axi", imx8mq_gpu_axi_sels, base + 0x8c00);
+	clks[IMX8MQ_CLK_GPU_AHB] = imx8m_clk_composite("gpu_ahb", imx8mq_gpu_ahb_sels, base + 0x8c80);
+	clks[IMX8MQ_CLK_NOC] = imx8m_clk_composite_critical("noc", imx8mq_noc_sels, base + 0x8d00);
+	clks[IMX8MQ_CLK_NOC_APB] = imx8m_clk_composite_critical("noc_apb", imx8mq_noc_apb_sels, base + 0x8d80);
+
+	/* AHB */
+	clks[IMX8MQ_CLK_AHB] = imx8m_clk_composite("ahb", imx8mq_ahb_sels, base + 0x9000);
+	clks[IMX8MQ_CLK_AUDIO_AHB] = imx8m_clk_composite("audio_ahb", imx8mq_audio_ahb_sels, base + 0x9100);
+
+	/* IPG */
+	clks[IMX8MQ_CLK_IPG_ROOT] = imx_clk_divider2("ipg_root", "ahb", base + 0x9080, 0, 1);
+	clks[IMX8MQ_CLK_IPG_AUDIO_ROOT] = imx_clk_divider2("ipg_audio_root", "audio_ahb", base + 0x9180, 0, 1);
+
+	/* IP */
+	clks[IMX8MQ_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", base + 0x9800, 24, 1, imx8mq_dram_core_sels, ARRAY_SIZE(imx8mq_dram_core_sels), CLK_IS_CRITICAL);
+
+	clks[IMX8MQ_CLK_DRAM_ALT] = imx8m_clk_composite("dram_alt", imx8mq_dram_alt_sels, base + 0xa000);
+	clks[IMX8MQ_CLK_DRAM_APB] = imx8m_clk_composite_critical("dram_apb", imx8mq_dram_apb_sels, base + 0xa080);
+	clks[IMX8MQ_CLK_VPU_G1] = imx8m_clk_composite("vpu_g1", imx8mq_vpu_g1_sels, base + 0xa100);
+	clks[IMX8MQ_CLK_VPU_G2] = imx8m_clk_composite("vpu_g2", imx8mq_vpu_g2_sels, base + 0xa180);
+	clks[IMX8MQ_CLK_DISP_DTRC] = imx8m_clk_composite("disp_dtrc", imx8mq_disp_dtrc_sels, base + 0xa200);
+	clks[IMX8MQ_CLK_DISP_DC8000] = imx8m_clk_composite("disp_dc8000", imx8mq_disp_dc8000_sels, base + 0xa280);
+	clks[IMX8MQ_CLK_PCIE1_CTRL] = imx8m_clk_composite("pcie1_ctrl", imx8mq_pcie1_ctrl_sels, base + 0xa300);
+	clks[IMX8MQ_CLK_PCIE1_PHY] = imx8m_clk_composite("pcie1_phy", imx8mq_pcie1_phy_sels, base + 0xa380);
+	clks[IMX8MQ_CLK_PCIE1_AUX] = imx8m_clk_composite("pcie1_aux", imx8mq_pcie1_aux_sels, base + 0xa400);
+	clks[IMX8MQ_CLK_DC_PIXEL] = imx8m_clk_composite("dc_pixel", imx8mq_dc_pixel_sels, base + 0xa480);
+	clks[IMX8MQ_CLK_LCDIF_PIXEL] = imx8m_clk_composite("lcdif_pixel", imx8mq_lcdif_pixel_sels, base + 0xa500);
+	clks[IMX8MQ_CLK_SAI1] = imx8m_clk_composite("sai1", imx8mq_sai1_sels, base + 0xa580);
+	clks[IMX8MQ_CLK_SAI2] = imx8m_clk_composite("sai2", imx8mq_sai2_sels, base + 0xa600);
+	clks[IMX8MQ_CLK_SAI3] = imx8m_clk_composite("sai3", imx8mq_sai3_sels, base + 0xa680);
+	clks[IMX8MQ_CLK_SAI4] = imx8m_clk_composite("sai4", imx8mq_sai4_sels, base + 0xa700);
+	clks[IMX8MQ_CLK_SAI5] = imx8m_clk_composite("sai5", imx8mq_sai5_sels, base + 0xa780);
+	clks[IMX8MQ_CLK_SAI6] = imx8m_clk_composite("sai6", imx8mq_sai6_sels, base + 0xa800);
+	clks[IMX8MQ_CLK_SPDIF1] = imx8m_clk_composite("spdif1", imx8mq_spdif1_sels, base + 0xa880);
+	clks[IMX8MQ_CLK_SPDIF2] = imx8m_clk_composite("spdif2", imx8mq_spdif2_sels, base + 0xa900);
+	clks[IMX8MQ_CLK_ENET_REF] = imx8m_clk_composite("enet_ref", imx8mq_enet_ref_sels, base + 0xa980);
+	clks[IMX8MQ_CLK_ENET_TIMER] = imx8m_clk_composite("enet_timer", imx8mq_enet_timer_sels, base + 0xaa00);
+	clks[IMX8MQ_CLK_ENET_PHY_REF] = imx8m_clk_composite("enet_phy", imx8mq_enet_phy_sels, base + 0xaa80);
+	clks[IMX8MQ_CLK_NAND] = imx8m_clk_composite("nand", imx8mq_nand_sels, base + 0xab00);
+	clks[IMX8MQ_CLK_QSPI] = imx8m_clk_composite("qspi", imx8mq_qspi_sels, base + 0xab80);
+	clks[IMX8MQ_CLK_USDHC1] = imx8m_clk_composite("usdhc1", imx8mq_usdhc1_sels, base + 0xac00);
+	clks[IMX8MQ_CLK_USDHC2] = imx8m_clk_composite("usdhc2", imx8mq_usdhc2_sels, base + 0xac80);
+	clks[IMX8MQ_CLK_I2C1] = imx8m_clk_composite("i2c1", imx8mq_i2c1_sels, base + 0xad00);
+	clks[IMX8MQ_CLK_I2C2] = imx8m_clk_composite("i2c2", imx8mq_i2c2_sels, base + 0xad80);
+	clks[IMX8MQ_CLK_I2C3] = imx8m_clk_composite("i2c3", imx8mq_i2c3_sels, base + 0xae00);
+	clks[IMX8MQ_CLK_I2C4] = imx8m_clk_composite("i2c4", imx8mq_i2c4_sels, base + 0xae80);
+	clks[IMX8MQ_CLK_UART1] = imx8m_clk_composite("uart1", imx8mq_uart1_sels, base + 0xaf00);
+	clks[IMX8MQ_CLK_UART2] = imx8m_clk_composite("uart2", imx8mq_uart2_sels, base + 0xaf80);
+	clks[IMX8MQ_CLK_UART3] = imx8m_clk_composite("uart3", imx8mq_uart3_sels, base + 0xb000);
+	clks[IMX8MQ_CLK_UART4] = imx8m_clk_composite("uart4", imx8mq_uart4_sels, base + 0xb080);
+	clks[IMX8MQ_CLK_USB_CORE_REF] = imx8m_clk_composite("usb_core_ref", imx8mq_usb_core_sels, base + 0xb100);
+	clks[IMX8MQ_CLK_USB_PHY_REF] = imx8m_clk_composite("usb_phy_ref", imx8mq_usb_phy_sels, base + 0xb180);
+	clks[IMX8MQ_CLK_ECSPI1] = imx8m_clk_composite("ecspi1", imx8mq_ecspi1_sels, base + 0xb280);
+	clks[IMX8MQ_CLK_ECSPI2] = imx8m_clk_composite("ecspi2", imx8mq_ecspi2_sels, base + 0xb300);
+	clks[IMX8MQ_CLK_PWM1] = imx8m_clk_composite("pwm1", imx8mq_pwm1_sels, base + 0xb380);
+	clks[IMX8MQ_CLK_PWM2] = imx8m_clk_composite("pwm2", imx8mq_pwm2_sels, base + 0xb400);
+	clks[IMX8MQ_CLK_PWM3] = imx8m_clk_composite("pwm3", imx8mq_pwm3_sels, base + 0xb480);
+	clks[IMX8MQ_CLK_PWM4] = imx8m_clk_composite("pwm4", imx8mq_pwm4_sels, base + 0xb500);
+	clks[IMX8MQ_CLK_GPT1] = imx8m_clk_composite("gpt1", imx8mq_gpt1_sels, base + 0xb580);
+	clks[IMX8MQ_CLK_WDOG] = imx8m_clk_composite("wdog", imx8mq_wdog_sels, base + 0xb900);
+	clks[IMX8MQ_CLK_WRCLK] = imx8m_clk_composite("wrclk", imx8mq_wrclk_sels, base + 0xb980);
+	clks[IMX8MQ_CLK_CLKO2] = imx8m_clk_composite("clko2", imx8mq_clko2_sels, base + 0xba80);
+	clks[IMX8MQ_CLK_DSI_CORE] = imx8m_clk_composite("dsi_core", imx8mq_dsi_core_sels, base + 0xbb00);
+	clks[IMX8MQ_CLK_DSI_PHY_REF] = imx8m_clk_composite("dsi_phy_ref", imx8mq_dsi_phy_sels, base + 0xbb80);
+	clks[IMX8MQ_CLK_DSI_DBI] = imx8m_clk_composite("dsi_dbi", imx8mq_dsi_dbi_sels, base + 0xbc00);
+	clks[IMX8MQ_CLK_DSI_ESC] = imx8m_clk_composite("dsi_esc", imx8mq_dsi_esc_sels, base + 0xbc80);
+	clks[IMX8MQ_CLK_DSI_AHB] = imx8m_clk_composite("dsi_ahb", imx8mq_dsi_ahb_sels, base + 0x9200);
+	clks[IMX8MQ_CLK_CSI1_CORE] = imx8m_clk_composite("csi1_core", imx8mq_csi1_core_sels, base + 0xbd00);
+	clks[IMX8MQ_CLK_CSI1_PHY_REF] = imx8m_clk_composite("csi1_phy_ref", imx8mq_csi1_phy_sels, base + 0xbd80);
+	clks[IMX8MQ_CLK_CSI1_ESC] = imx8m_clk_composite("csi1_esc", imx8mq_csi1_esc_sels, base + 0xbe00);
+	clks[IMX8MQ_CLK_CSI2_CORE] = imx8m_clk_composite("csi2_core", imx8mq_csi2_core_sels, base + 0xbe80);
+	clks[IMX8MQ_CLK_CSI2_PHY_REF] = imx8m_clk_composite("csi2_phy_ref", imx8mq_csi2_phy_sels, base + 0xbf00);
+	clks[IMX8MQ_CLK_CSI2_ESC] = imx8m_clk_composite("csi2_esc", imx8mq_csi2_esc_sels, base + 0xbf80);
+	clks[IMX8MQ_CLK_PCIE2_CTRL] = imx8m_clk_composite("pcie2_ctrl", imx8mq_pcie2_ctrl_sels, base + 0xc000);
+	clks[IMX8MQ_CLK_PCIE2_PHY] = imx8m_clk_composite("pcie2_phy", imx8mq_pcie2_phy_sels, base + 0xc080);
+	clks[IMX8MQ_CLK_PCIE2_AUX] = imx8m_clk_composite("pcie2_aux", imx8mq_pcie2_aux_sels, base + 0xc100);
+	clks[IMX8MQ_CLK_ECSPI3] = imx8m_clk_composite("ecspi3", imx8mq_ecspi3_sels, base + 0xc180);
+
+	clks[IMX8MQ_CLK_ECSPI1_ROOT] = imx_clk_gate4("ecspi1_root_clk", "ecspi1", base + 0x4070, 0);
+	clks[IMX8MQ_CLK_ECSPI2_ROOT] = imx_clk_gate4("ecspi2_root_clk", "ecspi2", base + 0x4080, 0);
+	clks[IMX8MQ_CLK_ECSPI3_ROOT] = imx_clk_gate4("ecspi3_root_clk", "ecspi3", base + 0x4090, 0);
+	clks[IMX8MQ_CLK_ENET1_ROOT] = imx_clk_gate4("enet1_root_clk", "enet_axi", base + 0x40a0, 0);
+	clks[IMX8MQ_CLK_GPT1_ROOT] = imx_clk_gate4("gpt1_root_clk", "gpt1", base + 0x4100, 0);
+	clks[IMX8MQ_CLK_I2C1_ROOT] = imx_clk_gate4("i2c1_root_clk", "i2c1", base + 0x4170, 0);
+	clks[IMX8MQ_CLK_I2C2_ROOT] = imx_clk_gate4("i2c2_root_clk", "i2c2", base + 0x4180, 0);
+	clks[IMX8MQ_CLK_I2C3_ROOT] = imx_clk_gate4("i2c3_root_clk", "i2c3", base + 0x4190, 0);
+	clks[IMX8MQ_CLK_I2C4_ROOT] = imx_clk_gate4("i2c4_root_clk", "i2c4", base + 0x41a0, 0);
+	clks[IMX8MQ_CLK_MU_ROOT] = imx_clk_gate4("mu_root_clk", "ipg_root", base + 0x4210, 0);
+	clks[IMX8MQ_CLK_OCOTP_ROOT] = imx_clk_gate4("ocotp_root_clk", "ipg_root", base + 0x4220, 0);
+	clks[IMX8MQ_CLK_PCIE1_ROOT] = imx_clk_gate4("pcie1_root_clk", "pcie1_ctrl", base + 0x4250, 0);
+	clks[IMX8MQ_CLK_PCIE2_ROOT] = imx_clk_gate4("pcie2_root_clk", "pcie2_ctrl", base + 0x4640, 0);
+	clks[IMX8MQ_CLK_PWM1_ROOT] = imx_clk_gate4("pwm1_root_clk", "pwm1", base + 0x4280, 0);
+	clks[IMX8MQ_CLK_PWM2_ROOT] = imx_clk_gate4("pwm2_root_clk", "pwm2", base + 0x4290, 0);
+	clks[IMX8MQ_CLK_PWM3_ROOT] = imx_clk_gate4("pwm3_root_clk", "pwm3", base + 0x42a0, 0);
+	clks[IMX8MQ_CLK_PWM4_ROOT] = imx_clk_gate4("pwm4_root_clk", "pwm4", base + 0x42b0, 0);
+	clks[IMX8MQ_CLK_QSPI_ROOT] = imx_clk_gate4("qspi_root_clk", "qspi", base + 0x42f0, 0);
+	clks[IMX8MQ_CLK_RAWNAND_ROOT] = imx_clk_gate2_shared2("nand_root_clk", "nand", base + 0x4300, 0, &share_count_nand);
+	clks[IMX8MQ_CLK_NAND_USDHC_BUS_RAWNAND_CLK] = imx_clk_gate2_shared2("nand_usdhc_rawnand_clk", "nand_usdhc_bus", base + 0x4300, 0, &share_count_nand);
+	clks[IMX8MQ_CLK_SAI1_ROOT] = imx_clk_gate2_shared2("sai1_root_clk", "sai1", base + 0x4330, 0, &share_count_sai1);
+	clks[IMX8MQ_CLK_SAI1_IPG] = imx_clk_gate2_shared2("sai1_ipg_clk", "ipg_audio_root", base + 0x4330, 0, &share_count_sai1);
+	clks[IMX8MQ_CLK_SAI2_ROOT] = imx_clk_gate2_shared2("sai2_root_clk", "sai2", base + 0x4340, 0, &share_count_sai2);
+	clks[IMX8MQ_CLK_SAI2_IPG] = imx_clk_gate2_shared2("sai2_ipg_clk", "ipg_root", base + 0x4340, 0, &share_count_sai2);
+	clks[IMX8MQ_CLK_SAI3_ROOT] = imx_clk_gate2_shared2("sai3_root_clk", "sai3", base + 0x4350, 0, &share_count_sai3);
+	clks[IMX8MQ_CLK_SAI3_IPG] = imx_clk_gate2_shared2("sai3_ipg_clk", "ipg_root", base + 0x4350, 0, &share_count_sai3);
+	clks[IMX8MQ_CLK_SAI4_ROOT] = imx_clk_gate2_shared2("sai4_root_clk", "sai4", base + 0x4360, 0, &share_count_sai4);
+	clks[IMX8MQ_CLK_SAI4_IPG] = imx_clk_gate2_shared2("sai4_ipg_clk", "ipg_audio_root", base + 0x4360, 0, &share_count_sai4);
+	clks[IMX8MQ_CLK_SAI5_ROOT] = imx_clk_gate2_shared2("sai5_root_clk", "sai5", base + 0x4370, 0, &share_count_sai5);
+	clks[IMX8MQ_CLK_SAI5_IPG] = imx_clk_gate2_shared2("sai5_ipg_clk", "ipg_audio_root", base + 0x4370, 0, &share_count_sai5);
+	clks[IMX8MQ_CLK_SAI6_ROOT] = imx_clk_gate2_shared2("sai6_root_clk", "sai6", base + 0x4380, 0, &share_count_sai6);
+	clks[IMX8MQ_CLK_SAI6_IPG] = imx_clk_gate2_shared2("sai6_ipg_clk", "ipg_audio_root", base + 0x4380, 0, &share_count_sai6);
+	clks[IMX8MQ_CLK_UART1_ROOT] = imx_clk_gate4("uart1_root_clk", "uart1", base + 0x4490, 0);
+	clks[IMX8MQ_CLK_UART2_ROOT] = imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0);
+	clks[IMX8MQ_CLK_UART3_ROOT] = imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0);
+	clks[IMX8MQ_CLK_UART4_ROOT] = imx_clk_gate4("uart4_root_clk", "uart4", base + 0x44c0, 0);
+	clks[IMX8MQ_CLK_USB1_CTRL_ROOT] = imx_clk_gate4("usb1_ctrl_root_clk", "usb_core_ref", base + 0x44d0, 0);
+	clks[IMX8MQ_CLK_USB2_CTRL_ROOT] = imx_clk_gate4("usb2_ctrl_root_clk", "usb_core_ref", base + 0x44e0, 0);
+	clks[IMX8MQ_CLK_USB1_PHY_ROOT] = imx_clk_gate4("usb1_phy_root_clk", "usb_phy_ref", base + 0x44f0, 0);
+	clks[IMX8MQ_CLK_USB2_PHY_ROOT] = imx_clk_gate4("usb2_phy_root_clk", "usb_phy_ref", base + 0x4500, 0);
+	clks[IMX8MQ_CLK_USDHC1_ROOT] = imx_clk_gate4("usdhc1_root_clk", "usdhc1", base + 0x4510, 0);
+	clks[IMX8MQ_CLK_USDHC2_ROOT] = imx_clk_gate4("usdhc2_root_clk", "usdhc2", base + 0x4520, 0);
+	clks[IMX8MQ_CLK_WDOG1_ROOT] = imx_clk_gate4("wdog1_root_clk", "wdog", base + 0x4530, 0);
+	clks[IMX8MQ_CLK_WDOG2_ROOT] = imx_clk_gate4("wdog2_root_clk", "wdog", base + 0x4540, 0);
+	clks[IMX8MQ_CLK_WDOG3_ROOT] = imx_clk_gate4("wdog3_root_clk", "wdog", base + 0x4550, 0);
+	clks[IMX8MQ_CLK_VPU_G1_ROOT] = imx_clk_gate2_flags("vpu_g1_root_clk", "vpu_g1", base + 0x4560, 0, CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
+	clks[IMX8MQ_CLK_GPU_ROOT] = imx_clk_gate4("gpu_root_clk", "gpu_core_div", base + 0x4570, 0);
+	clks[IMX8MQ_CLK_VPU_G2_ROOT] = imx_clk_gate2_flags("vpu_g2_root_clk", "vpu_g2", base + 0x45a0, 0, CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
+	clks[IMX8MQ_CLK_DISP_ROOT] = imx_clk_gate2_shared2("disp_root_clk", "disp_dc8000", base + 0x45d0, 0, &share_count_dcss);
+	clks[IMX8MQ_CLK_DISP_AXI_ROOT]  = imx_clk_gate2_shared2("disp_axi_root_clk", "disp_axi", base + 0x45d0, 0, &share_count_dcss);
+	clks[IMX8MQ_CLK_DISP_APB_ROOT]  = imx_clk_gate2_shared2("disp_apb_root_clk", "disp_apb", base + 0x45d0, 0, &share_count_dcss);
+	clks[IMX8MQ_CLK_DISP_RTRM_ROOT] = imx_clk_gate2_shared2("disp_rtrm_root_clk", "disp_rtrm", base + 0x45d0, 0, &share_count_dcss);
+	clks[IMX8MQ_CLK_TMU_ROOT] = imx_clk_gate4_flags("tmu_root_clk", "ipg_root", base + 0x4620, 0, CLK_IS_CRITICAL);
+	clks[IMX8MQ_CLK_VPU_DEC_ROOT] = imx_clk_gate2_flags("vpu_dec_root_clk", "vpu_bus", base + 0x4630, 0, CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
+	clks[IMX8MQ_CLK_CSI1_ROOT] = imx_clk_gate4("csi1_root_clk", "csi1_core", base + 0x4650, 0);
+	clks[IMX8MQ_CLK_CSI2_ROOT] = imx_clk_gate4("csi2_root_clk", "csi2_core", base + 0x4660, 0);
+	clks[IMX8MQ_CLK_SDMA1_ROOT] = imx_clk_gate4("sdma1_clk", "ipg_root", base + 0x43a0, 0);
+	clks[IMX8MQ_CLK_SDMA2_ROOT] = imx_clk_gate4("sdma2_clk", "ipg_audio_root", base + 0x43b0, 0);
+
+	clks[IMX8MQ_GPT_3M_CLK] = imx_clk_fixed_factor("gpt_3m", "osc_25m", 1, 8);
+	clks[IMX8MQ_CLK_DRAM_ALT_ROOT] = imx_clk_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
+
+	for (i = 0; i < IMX8MQ_CLK_END; i++)
+		if (IS_ERR(clks[i]))
+			pr_err("i.MX8mq clk %u register failed with %ld\n",
+			       i, PTR_ERR(clks[i]));
+
+	clk_data.clks = clks;
+	clk_data.clk_num = ARRAY_SIZE(clks);
+
+	err = of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+	WARN_ON(err);
+
+	return err;
+}
+
+static const struct of_device_id imx8mq_clk_of_match[] = {
+	{ .compatible = "fsl,imx8mq-ccm" },
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8mq_clk_of_match);
+
+
+static struct platform_driver imx8mq_clk_driver = {
+	.probe = imx8mq_clocks_probe,
+	.driver = {
+		.name = "imx8mq-ccm",
+		.of_match_table = of_match_ptr(imx8mq_clk_of_match),
+	},
+};
+module_platform_driver(imx8mq_clk_driver);
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 3bd4cd330c97..2f38dcd3d8ea 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -116,6 +116,15 @@ static inline struct clk *imx_clk_divider2(const char *name, const char *parent,
 			reg, shift, width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_divider2_flags(const char *name,
+		const char *parent, void __iomem *reg, u8 shift, u8 width,
+		unsigned long flags)
+{
+	return clk_register_divider(NULL, name, parent,
+			flags | CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_gate(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {
@@ -190,6 +199,15 @@ static inline struct clk *imx_clk_gate3(const char *name, const char *parent,
 			reg, shift, 0, &imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_gate3_flags(const char *name,
+		const char *parent, void __iomem *reg, u8 shift,
+		unsigned long flags)
+{
+	return clk_register_gate(NULL, name, parent,
+			flags | CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+			reg, shift, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_gate4(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {
@@ -198,6 +216,15 @@ static inline struct clk *imx_clk_gate4(const char *name, const char *parent,
 			reg, shift, 0x3, 0, &imx_ccm_lock, NULL);
 }
 
+static inline struct clk *imx_clk_gate4_flags(const char *name,
+		const char *parent, void __iomem *reg, u8 shift,
+		unsigned long flags)
+{
+	return clk_register_gate2(NULL, name, parent,
+			flags | CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+			reg, shift, 0x3, 0, &imx_ccm_lock, NULL);
+}
+
 static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 		u8 shift, u8 width, const char **parents, int num_parents)
 {
@@ -223,6 +250,15 @@ static inline struct clk *imx_clk_mux_flags(const char *name,
 			&imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_mux2_flags(const char *name,
+		void __iomem *reg, u8 shift, u8 width, const char **parents,
+		int num_parents, unsigned long flags)
+{
+	return clk_register_mux(NULL, name, parents, num_parents,
+			flags | CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
 struct clk *imx_clk_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
-- 
cgit v1.2.3-59-g8ed1b


From 6209624b9a5c1e417b142e9688f5fc96c1e0cd58 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Sat, 1 Dec 2018 10:52:11 +0000
Subject: clk: imx: Add fractional PLL output clock

This is a new fractional clock type introduced on i.MX8.

The description of this fractional clock can be found here:

https://www.nxp.com/docs/en/reference-manual/IMX8MDQLQRM.pdf#page=834

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile       |   1 +
 drivers/clk/imx/clk-frac-pll.c | 232 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h          |   3 +
 3 files changed, 236 insertions(+)
 create mode 100644 drivers/clk/imx/clk-frac-pll.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 3e2492a814a7..cd84e2ca2459 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -7,6 +7,7 @@ obj-y += \
 	clk-cpu.o \
 	clk-fixup-div.o \
 	clk-fixup-mux.o \
+	clk-frac-pll.o \
 	clk-gate-exclusive.o \
 	clk-gate2.o \
 	clk-pllv1.o \
diff --git a/drivers/clk/imx/clk-frac-pll.c b/drivers/clk/imx/clk-frac-pll.c
new file mode 100644
index 000000000000..0026c3969b1e
--- /dev/null
+++ b/drivers/clk/imx/clk-frac-pll.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 NXP.
+ *
+ * This driver supports the fractional plls found in the imx8m SOCs
+ *
+ * Documentation for this fractional pll can be found at:
+ *   https://www.nxp.com/docs/en/reference-manual/IMX8MDQLQRM.pdf#page=834
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+#include <linux/bitfield.h>
+
+#include "clk.h"
+
+#define PLL_CFG0		0x0
+#define PLL_CFG1		0x4
+
+#define PLL_LOCK_STATUS		BIT(31)
+#define PLL_PD_MASK		BIT(19)
+#define PLL_BYPASS_MASK		BIT(14)
+#define PLL_NEWDIV_VAL		BIT(12)
+#define PLL_NEWDIV_ACK		BIT(11)
+#define PLL_FRAC_DIV_MASK	GENMASK(30, 7)
+#define PLL_INT_DIV_MASK	GENMASK(6, 0)
+#define PLL_OUTPUT_DIV_MASK	GENMASK(4, 0)
+#define PLL_FRAC_DENOM		0x1000000
+
+#define PLL_FRAC_LOCK_TIMEOUT	10000
+#define PLL_FRAC_ACK_TIMEOUT	500000
+
+struct clk_frac_pll {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+#define to_clk_frac_pll(_hw) container_of(_hw, struct clk_frac_pll, hw)
+
+static int clk_wait_lock(struct clk_frac_pll *pll)
+{
+	u32 val;
+
+	return readl_poll_timeout(pll->base, val, val & PLL_LOCK_STATUS, 0,
+					PLL_FRAC_LOCK_TIMEOUT);
+}
+
+static int clk_wait_ack(struct clk_frac_pll *pll)
+{
+	u32 val;
+
+	/* return directly if the pll is in powerdown or in bypass */
+	if (readl_relaxed(pll->base) & (PLL_PD_MASK | PLL_BYPASS_MASK))
+		return 0;
+
+	/* Wait for the pll's divfi and divff to be reloaded */
+	return readl_poll_timeout(pll->base, val, val & PLL_NEWDIV_ACK, 0,
+					PLL_FRAC_ACK_TIMEOUT);
+}
+
+static int clk_pll_prepare(struct clk_hw *hw)
+{
+	struct clk_frac_pll *pll = to_clk_frac_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val &= ~PLL_PD_MASK;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+	return clk_wait_lock(pll);
+}
+
+static void clk_pll_unprepare(struct clk_hw *hw)
+{
+	struct clk_frac_pll *pll = to_clk_frac_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val |= PLL_PD_MASK;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+}
+
+static int clk_pll_is_prepared(struct clk_hw *hw)
+{
+	struct clk_frac_pll *pll = to_clk_frac_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	return (val & PLL_PD_MASK) ? 0 : 1;
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_frac_pll *pll = to_clk_frac_pll(hw);
+	u32 val, divff, divfi, divq;
+	u64 temp64 = parent_rate;
+	u64 rate;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	divq = (FIELD_GET(PLL_OUTPUT_DIV_MASK, val) + 1) * 2;
+	val = readl_relaxed(pll->base + PLL_CFG1);
+	divff = FIELD_GET(PLL_FRAC_DIV_MASK, val);
+	divfi = FIELD_GET(PLL_INT_DIV_MASK, val);
+
+	temp64 *= 8;
+	temp64 *= divff;
+	do_div(temp64, PLL_FRAC_DENOM);
+	do_div(temp64, divq);
+
+	rate = parent_rate * 8 * (divfi + 1);
+	do_div(rate, divq);
+	rate += temp64;
+
+	return rate;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	u64 parent_rate = *prate;
+	u32 divff, divfi;
+	u64 temp64;
+
+	parent_rate *= 8;
+	rate *= 2;
+	temp64 = rate;
+	do_div(temp64, parent_rate);
+	divfi = temp64;
+	temp64 = rate - divfi * parent_rate;
+	temp64 *= PLL_FRAC_DENOM;
+	do_div(temp64, parent_rate);
+	divff = temp64;
+
+	temp64 = parent_rate;
+	temp64 *= divff;
+	do_div(temp64, PLL_FRAC_DENOM);
+
+	rate = parent_rate * divfi + temp64;
+
+	return rate / 2;
+}
+
+/*
+ * To simplify the clock calculation, we can keep the 'PLL_OUTPUT_VAL' at zero
+ * (means the PLL output will be divided by 2). So the PLL output can use
+ * the below formula:
+ * pllout = parent_rate * 8 / 2 * DIVF_VAL;
+ * where DIVF_VAL = 1 + DIVFI + DIVFF / 2^24.
+ */
+static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_frac_pll *pll = to_clk_frac_pll(hw);
+	u32 val, divfi, divff;
+	u64 temp64 = parent_rate;
+	int ret;
+
+	parent_rate *= 8;
+	rate *= 2;
+	divfi = rate / parent_rate;
+	temp64 *= rate - divfi;
+	temp64 *= PLL_FRAC_DENOM;
+	do_div(temp64, parent_rate);
+	divff = temp64;
+
+	val = readl_relaxed(pll->base + PLL_CFG1);
+	val &= ~(PLL_FRAC_DIV_MASK | PLL_INT_DIV_MASK);
+	val |= (divff << 7) | (divfi - 1);
+	writel_relaxed(val, pll->base + PLL_CFG1);
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val &= ~0x1f;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+	/* Set the NEV_DIV_VAL to reload the DIVFI and DIVFF */
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val |= PLL_NEWDIV_VAL;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+	ret = clk_wait_ack(pll);
+
+	/* clear the NEV_DIV_VAL */
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val &= ~PLL_NEWDIV_VAL;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+	return ret;
+}
+
+static const struct clk_ops clk_frac_pll_ops = {
+	.prepare	= clk_pll_prepare,
+	.unprepare	= clk_pll_unprepare,
+	.is_prepared	= clk_pll_is_prepared,
+	.recalc_rate	= clk_pll_recalc_rate,
+	.round_rate	= clk_pll_round_rate,
+	.set_rate	= clk_pll_set_rate,
+};
+
+struct clk *imx_clk_frac_pll(const char *name, const char *parent_name,
+			     void __iomem *base)
+{
+	struct clk_init_data init;
+	struct clk_frac_pll *pll;
+	struct clk_hw *hw;
+	int ret;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_frac_pll_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->base = base;
+	pll->hw.init = &init;
+
+	hw = &pll->hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	return hw->clk;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 2f38dcd3d8ea..a9647dc04a64 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -27,6 +27,9 @@ struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
 struct clk *imx_clk_pllv2(const char *name, const char *parent,
 		void __iomem *base);
 
+struct clk *imx_clk_frac_pll(const char *name, const char *parent_name,
+			     void __iomem *base);
+
 enum imx_pllv3_type {
 	IMX_PLLV3_GENERIC,
 	IMX_PLLV3_SYS,
-- 
cgit v1.2.3-59-g8ed1b


From ff70fbd0e81018b45daad5f64ee03ce32d20c917 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Sat, 1 Dec 2018 10:52:13 +0000
Subject: clk: imx: Add SCCG PLL type

The SCCG is a new PLL type introduced on i.MX8.

The description of this SCCG clock can be found here:

https://www.nxp.com/docs/en/reference-manual/IMX8MDQLQRM.pdf#page=834

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile       |   3 +-
 drivers/clk/imx/clk-sccg-pll.c | 256 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h          |   9 ++
 3 files changed, 267 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-sccg-pll.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index cd84e2ca2459..6952f055d0e3 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -13,7 +13,8 @@ obj-y += \
 	clk-pllv1.o \
 	clk-pllv2.o \
 	clk-pllv3.o \
-	clk-pfd.o
+	clk-pfd.o \
+	clk-sccg-pll.o
 
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
diff --git a/drivers/clk/imx/clk-sccg-pll.c b/drivers/clk/imx/clk-sccg-pll.c
new file mode 100644
index 000000000000..ee7752bace89
--- /dev/null
+++ b/drivers/clk/imx/clk-sccg-pll.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 NXP.
+ *
+ * This driver supports the SCCG plls found in the imx8m SOCs
+ *
+ * Documentation for this SCCG pll can be found at:
+ *   https://www.nxp.com/docs/en/reference-manual/IMX8MDQLQRM.pdf#page=834
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+#include <linux/bitfield.h>
+
+#include "clk.h"
+
+/* PLL CFGs */
+#define PLL_CFG0		0x0
+#define PLL_CFG1		0x4
+#define PLL_CFG2		0x8
+
+#define PLL_DIVF1_MASK		GENMASK(18, 13)
+#define PLL_DIVF2_MASK		GENMASK(12, 7)
+#define PLL_DIVR1_MASK		GENMASK(27, 25)
+#define PLL_DIVR2_MASK		GENMASK(24, 19)
+#define PLL_REF_MASK		GENMASK(2, 0)
+
+#define PLL_LOCK_MASK		BIT(31)
+#define PLL_PD_MASK		BIT(7)
+
+#define OSC_25M			25000000
+#define OSC_27M			27000000
+
+#define PLL_SCCG_LOCK_TIMEOUT	70
+
+struct clk_sccg_pll {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+#define to_clk_sccg_pll(_hw) container_of(_hw, struct clk_sccg_pll, hw)
+
+static int clk_pll_wait_lock(struct clk_sccg_pll *pll)
+{
+	u32 val;
+
+	return readl_poll_timeout(pll->base, val, val & PLL_LOCK_MASK, 0,
+					PLL_SCCG_LOCK_TIMEOUT);
+}
+
+static int clk_pll1_is_prepared(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	return (val & PLL_PD_MASK) ? 0 : 1;
+}
+
+static unsigned long clk_pll1_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val, divf;
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	divf = FIELD_GET(PLL_DIVF1_MASK, val);
+
+	return parent_rate * 2 * (divf + 1);
+}
+
+static long clk_pll1_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	u32 div;
+
+	if (!parent_rate)
+		return 0;
+
+	div = rate / (parent_rate * 2);
+
+	return parent_rate * div * 2;
+}
+
+static int clk_pll1_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+	u32 divf;
+
+	if (!parent_rate)
+		return -EINVAL;
+
+	divf = rate / (parent_rate * 2);
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	val &= ~PLL_DIVF1_MASK;
+	val |= FIELD_PREP(PLL_DIVF1_MASK, divf - 1);
+	writel_relaxed(val, pll->base + PLL_CFG2);
+
+	return clk_pll_wait_lock(pll);
+}
+
+static int clk_pll1_prepare(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val &= ~PLL_PD_MASK;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+	return clk_pll_wait_lock(pll);
+}
+
+static void clk_pll1_unprepare(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	val |= PLL_PD_MASK;
+	writel_relaxed(val, pll->base + PLL_CFG0);
+
+}
+
+static unsigned long clk_pll2_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val, ref, divr1, divf1, divr2, divf2;
+	u64 temp64;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	switch (FIELD_GET(PLL_REF_MASK, val)) {
+	case 0:
+		ref = OSC_25M;
+		break;
+	case 1:
+		ref = OSC_27M;
+		break;
+	default:
+		ref = OSC_25M;
+		break;
+	}
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	divr1 = FIELD_GET(PLL_DIVR1_MASK, val);
+	divr2 = FIELD_GET(PLL_DIVR2_MASK, val);
+	divf1 = FIELD_GET(PLL_DIVF1_MASK, val);
+	divf2 = FIELD_GET(PLL_DIVF2_MASK, val);
+
+	temp64 = ref * 2;
+	temp64 *= (divf1 + 1) * (divf2 + 1);
+
+	do_div(temp64, (divr1 + 1) * (divr2 + 1));
+
+	return temp64;
+}
+
+static long clk_pll2_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	u32 div;
+	unsigned long parent_rate = *prate;
+
+	if (!parent_rate)
+		return 0;
+
+	div = rate / parent_rate;
+
+	return parent_rate * div;
+}
+
+static int clk_pll2_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	u32 val;
+	u32 divf;
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+
+	if (!parent_rate)
+		return -EINVAL;
+
+	divf = rate / parent_rate;
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	val &= ~PLL_DIVF2_MASK;
+	val |= FIELD_PREP(PLL_DIVF2_MASK, divf - 1);
+	writel_relaxed(val, pll->base + PLL_CFG2);
+
+	return clk_pll_wait_lock(pll);
+}
+
+static const struct clk_ops clk_sccg_pll1_ops = {
+	.is_prepared	= clk_pll1_is_prepared,
+	.recalc_rate	= clk_pll1_recalc_rate,
+	.round_rate	= clk_pll1_round_rate,
+	.set_rate	= clk_pll1_set_rate,
+};
+
+static const struct clk_ops clk_sccg_pll2_ops = {
+	.prepare	= clk_pll1_prepare,
+	.unprepare	= clk_pll1_unprepare,
+	.recalc_rate	= clk_pll2_recalc_rate,
+	.round_rate	= clk_pll2_round_rate,
+	.set_rate	= clk_pll2_set_rate,
+};
+
+struct clk *imx_clk_sccg_pll(const char *name,
+				const char *parent_name,
+				void __iomem *base,
+				enum imx_sccg_pll_type pll_type)
+{
+	struct clk_sccg_pll *pll;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int ret;
+
+	switch (pll_type) {
+	case SCCG_PLL1:
+		init.ops = &clk_sccg_pll1_ops;
+		break;
+	case SCCG_PLL2:
+		init.ops = &clk_sccg_pll2_ops;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->base = base;
+	pll->hw.init = &init;
+
+	hw = &pll->hw;
+
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll);
+		return ERR_PTR(ret);
+	}
+
+	return hw->clk;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index a9647dc04a64..34357ca970ae 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -21,6 +21,11 @@ enum imx_pllv1_type {
 	IMX_PLLV1_IMX35,
 };
 
+enum imx_sccg_pll_type {
+	SCCG_PLL1,
+	SCCG_PLL2,
+};
+
 struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
 		const char *parent, void __iomem *base);
 
@@ -30,6 +35,10 @@ struct clk *imx_clk_pllv2(const char *name, const char *parent,
 struct clk *imx_clk_frac_pll(const char *name, const char *parent_name,
 			     void __iomem *base);
 
+struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
+			     void __iomem *base,
+			     enum imx_sccg_pll_type pll_type);
+
 enum imx_pllv3_type {
 	IMX_PLLV3_GENERIC,
 	IMX_PLLV3_SYS,
-- 
cgit v1.2.3-59-g8ed1b


From 404680794224334bcbea498d571c645e1838c879 Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:01:35 +0000
Subject: clk: imx: add gatable clock divider support

For dividers with zero indicating clock is disabled, instead of giving a
warning each time like "clkx: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not
set" in exist code, we'd like to introduce enable/disable function for it.
e.g.
000b - Clock disabled
001b - Divide by 1
010b - Divide by 2
...

Set rate when the clk is disabled will cache the rate request and only
when the clk is enabled will the driver actually program the hardware to
have the requested divider value. Similarly, when the clk is disabled we'll
write a 0 there, but when the clk is enabled we'll restore whatever rate
(divider) was chosen last.

It does mean that recalc rate will be sort of odd, because when the clk is
off it will return 0, and when the clk is on it will return the right rate.
So to make things work, we'll need to return the cached rate in recalc rate
when the clk is off and read the hardware when the clk is on.

NOTE for the default off divider, the recalc rate will still return 0 as
there's still no proper preset rate. Enable such divider will give user
a reminder error message.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[sboyd@kernel.org: Include clk.h for sparse warnings]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile           |   1 +
 drivers/clk/imx/clk-divider-gate.c | 221 +++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h              |   4 +
 3 files changed, 226 insertions(+)
 create mode 100644 drivers/clk/imx/clk-divider-gate.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 8c3baa7e6496..077e732a73ca 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -4,6 +4,7 @@ obj-y += \
 	clk.o \
 	clk-busy.o \
 	clk-cpu.o \
+	clk-divider-gate.o \
 	clk-fixup-div.o \
 	clk-fixup-mux.o \
 	clk-gate-exclusive.o \
diff --git a/drivers/clk/imx/clk-divider-gate.c b/drivers/clk/imx/clk-divider-gate.c
new file mode 100644
index 000000000000..df1f8429fe16
--- /dev/null
+++ b/drivers/clk/imx/clk-divider-gate.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP.
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+struct clk_divider_gate {
+	struct clk_divider divider;
+	u32 cached_val;
+};
+
+static inline struct clk_divider_gate *to_clk_divider_gate(struct clk_hw *hw)
+{
+	struct clk_divider *div = to_clk_divider(hw);
+
+	return container_of(div, struct clk_divider_gate, divider);
+}
+
+static unsigned long clk_divider_gate_recalc_rate_ro(struct clk_hw *hw,
+						     unsigned long parent_rate)
+{
+	struct clk_divider *div = to_clk_divider(hw);
+	unsigned int val;
+
+	val = clk_readl(div->reg) >> div->shift;
+	val &= clk_div_mask(div->width);
+	if (!val)
+		return 0;
+
+	return divider_recalc_rate(hw, parent_rate, val, div->table,
+				   div->flags, div->width);
+}
+
+static unsigned long clk_divider_gate_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct clk_divider_gate *div_gate = to_clk_divider_gate(hw);
+	struct clk_divider *div = to_clk_divider(hw);
+	unsigned long flags = 0;
+	unsigned int val;
+
+	spin_lock_irqsave(div->lock, flags);
+
+	if (!clk_hw_is_enabled(hw)) {
+		val = div_gate->cached_val;
+	} else {
+		val = clk_readl(div->reg) >> div->shift;
+		val &= clk_div_mask(div->width);
+	}
+
+	spin_unlock_irqrestore(div->lock, flags);
+
+	if (!val)
+		return 0;
+
+	return divider_recalc_rate(hw, parent_rate, val, div->table,
+				   div->flags, div->width);
+}
+
+static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *prate)
+{
+	return clk_divider_ops.round_rate(hw, rate, prate);
+}
+
+static int clk_divider_gate_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_divider_gate *div_gate = to_clk_divider_gate(hw);
+	struct clk_divider *div = to_clk_divider(hw);
+	unsigned long flags = 0;
+	int value;
+	u32 val;
+
+	value = divider_get_val(rate, parent_rate, div->table,
+				div->width, div->flags);
+	if (value < 0)
+		return value;
+
+	spin_lock_irqsave(div->lock, flags);
+
+	if (clk_hw_is_enabled(hw)) {
+		val = clk_readl(div->reg);
+		val &= ~(clk_div_mask(div->width) << div->shift);
+		val |= (u32)value << div->shift;
+		clk_writel(val, div->reg);
+	} else {
+		div_gate->cached_val = value;
+	}
+
+	spin_unlock_irqrestore(div->lock, flags);
+
+	return 0;
+}
+
+static int clk_divider_enable(struct clk_hw *hw)
+{
+	struct clk_divider_gate *div_gate = to_clk_divider_gate(hw);
+	struct clk_divider *div = to_clk_divider(hw);
+	unsigned long flags = 0;
+	u32 val;
+
+	if (!div_gate->cached_val) {
+		pr_err("%s: no valid preset rate\n", clk_hw_get_name(hw));
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(div->lock, flags);
+	/* restore div val */
+	val = clk_readl(div->reg);
+	val |= div_gate->cached_val << div->shift;
+	clk_writel(val, div->reg);
+
+	spin_unlock_irqrestore(div->lock, flags);
+
+	return 0;
+}
+
+static void clk_divider_disable(struct clk_hw *hw)
+{
+	struct clk_divider_gate *div_gate = to_clk_divider_gate(hw);
+	struct clk_divider *div = to_clk_divider(hw);
+	unsigned long flags = 0;
+	u32 val;
+
+	spin_lock_irqsave(div->lock, flags);
+
+	/* store the current div val */
+	val = clk_readl(div->reg) >> div->shift;
+	val &= clk_div_mask(div->width);
+	div_gate->cached_val = val;
+	clk_writel(0, div->reg);
+
+	spin_unlock_irqrestore(div->lock, flags);
+}
+
+static int clk_divider_is_enabled(struct clk_hw *hw)
+{
+	struct clk_divider *div = to_clk_divider(hw);
+	u32 val;
+
+	val = clk_readl(div->reg) >> div->shift;
+	val &= clk_div_mask(div->width);
+
+	return val ? 1 : 0;
+}
+
+static const struct clk_ops clk_divider_gate_ro_ops = {
+	.recalc_rate = clk_divider_gate_recalc_rate_ro,
+	.round_rate = clk_divider_round_rate,
+};
+
+static const struct clk_ops clk_divider_gate_ops = {
+	.recalc_rate = clk_divider_gate_recalc_rate,
+	.round_rate = clk_divider_round_rate,
+	.set_rate = clk_divider_gate_set_rate,
+	.enable = clk_divider_enable,
+	.disable = clk_divider_disable,
+	.is_enabled = clk_divider_is_enabled,
+};
+
+/*
+ * NOTE: In order to resue the most code from the common divider,
+ * we also design our divider following the way that provids an extra
+ * clk_divider_flags, however it's fixed to CLK_DIVIDER_ONE_BASED by
+ * default as our HW is. Besides that it supports only CLK_DIVIDER_READ_ONLY
+ * flag which can be specified by user flexibly.
+ */
+struct clk_hw *imx_clk_divider_gate(const char *name, const char *parent_name,
+				    unsigned long flags, void __iomem *reg,
+				    u8 shift, u8 width, u8 clk_divider_flags,
+				    const struct clk_div_table *table,
+				    spinlock_t *lock)
+{
+	struct clk_init_data init;
+	struct clk_divider_gate *div_gate;
+	struct clk_hw *hw;
+	u32 val;
+	int ret;
+
+	div_gate  = kzalloc(sizeof(*div_gate), GFP_KERNEL);
+	if (!div_gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
+		init.ops = &clk_divider_gate_ro_ops;
+	else
+		init.ops = &clk_divider_gate_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	div_gate->divider.reg = reg;
+	div_gate->divider.shift = shift;
+	div_gate->divider.width = width;
+	div_gate->divider.lock = lock;
+	div_gate->divider.table = table;
+	div_gate->divider.hw.init = &init;
+	div_gate->divider.flags = CLK_DIVIDER_ONE_BASED | clk_divider_flags;
+	/* cache gate status */
+	val = clk_readl(reg) >> shift;
+	val &= clk_div_mask(width);
+	div_gate->cached_val = val;
+
+	hw = &div_gate->divider.hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(div_gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 5895e2237b6c..bb74934b357f 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -227,4 +227,8 @@ struct clk *imx_clk_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
 
+struct clk_hw *imx_clk_divider_gate(const char *name, const char *parent_name,
+		unsigned long flags, void __iomem *reg, u8 shift, u8 width,
+		u8 clk_divider_flags, const struct clk_div_table *table,
+		spinlock_t *lock);
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From e983da27f70e8d29f4ae7262d52e4d07129498f3 Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:01:39 +0000
Subject: clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support

Adding CLK_FRAC_DIVIDER_ZERO_BASED flag to indicate the numerator and
denominator value in register are start from 0.

This can be used to support frac dividers like below:
Divider output clock = Divider input clock x [(frac +1) / (div +1)]
where frac/div in register is:
000b - Divide by 1.
001b - Divide by 2.
010b - Divide by 3.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/clk-fractional-divider.c | 10 ++++++++++
 include/linux/clk-provider.h         |  8 ++++++++
 2 files changed, 18 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index fdf625fb10fa..7ccde6bd8dd5 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -40,6 +40,11 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw,
 	m = (val & fd->mmask) >> fd->mshift;
 	n = (val & fd->nmask) >> fd->nshift;
 
+	if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
+		m++;
+		n++;
+	}
+
 	if (!n || !m)
 		return parent_rate;
 
@@ -103,6 +108,11 @@ static int clk_fd_set_rate(struct clk_hw *hw, unsigned long rate,
 			GENMASK(fd->mwidth - 1, 0), GENMASK(fd->nwidth - 1, 0),
 			&m, &n);
 
+	if (fd->flags & CLK_FRAC_DIVIDER_ZERO_BASED) {
+		m--;
+		n--;
+	}
+
 	if (fd->lock)
 		spin_lock_irqsave(fd->lock, flags);
 	else
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 60c51871b04b..fa0bad94f26b 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -601,6 +601,12 @@ void clk_hw_unregister_fixed_factor(struct clk_hw *hw);
  * @lock:	register lock
  *
  * Clock with adjustable fractional divider affecting its output frequency.
+ *
+ * Flags:
+ * CLK_FRAC_DIVIDER_ZERO_BASED - by default the numerator and denominator
+ *	is the value read from the register. If CLK_FRAC_DIVIDER_ZERO_BASED
+ *	is set then the numerator and denominator are both the value read
+ *	plus one.
  */
 struct clk_fractional_divider {
 	struct clk_hw	hw;
@@ -620,6 +626,8 @@ struct clk_fractional_divider {
 
 #define to_clk_fd(_hw) container_of(_hw, struct clk_fractional_divider, hw)
 
+#define CLK_FRAC_DIVIDER_ZERO_BASED		BIT(0)
+
 extern const struct clk_ops clk_fractional_divider_ops;
 struct clk *clk_register_fractional_divider(struct device *dev,
 		const char *name, const char *parent_name, unsigned long flags,
-- 
cgit v1.2.3-59-g8ed1b


From d9a8f950b296729b88d7139904cac5fd6d0a5261 Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:01:43 +0000
Subject: clk: imx: add pllv4 support

pllv4 is designed for System Clock Generation (SCG) module observed
in IMX ULP SoC series. e.g. i.MX7ULP.

The SCG modules generates clock used to derive processor, system,
peripheral bus and external memory interface clocks while this patch
intends to support the PLL part.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[sboyd@kernel.org: Include clk.h for sparse warnings]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile    |   1 +
 drivers/clk/imx/clk-pllv4.c | 184 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h       |   3 +
 3 files changed, 188 insertions(+)
 create mode 100644 drivers/clk/imx/clk-pllv4.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 077e732a73ca..4cac28b21d05 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -12,6 +12,7 @@ obj-y += \
 	clk-pllv1.o \
 	clk-pllv2.o \
 	clk-pllv3.o \
+	clk-pllv4.o \
 	clk-pfd.o
 
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
diff --git a/drivers/clk/imx/clk-pllv4.c b/drivers/clk/imx/clk-pllv4.c
new file mode 100644
index 000000000000..d38bc9f87c1d
--- /dev/null
+++ b/drivers/clk/imx/clk-pllv4.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+/* PLL Control Status Register (xPLLCSR) */
+#define PLL_CSR_OFFSET		0x0
+#define PLL_VLD			BIT(24)
+#define PLL_EN			BIT(0)
+
+/* PLL Configuration Register (xPLLCFG) */
+#define PLL_CFG_OFFSET		0x08
+#define BP_PLL_MULT		16
+#define BM_PLL_MULT		(0x7f << 16)
+
+/* PLL Numerator Register (xPLLNUM) */
+#define PLL_NUM_OFFSET		0x10
+
+/* PLL Denominator Register (xPLLDENOM) */
+#define PLL_DENOM_OFFSET	0x14
+
+struct clk_pllv4 {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+/* Valid PLL MULT Table */
+static const int pllv4_mult_table[] = {33, 27, 22, 20, 17, 16};
+
+#define to_clk_pllv4(__hw) container_of(__hw, struct clk_pllv4, hw)
+
+#define LOCK_TIMEOUT_US		USEC_PER_MSEC
+
+static inline int clk_pllv4_wait_lock(struct clk_pllv4 *pll)
+{
+	u32 csr;
+
+	return readl_poll_timeout(pll->base  + PLL_CSR_OFFSET,
+				  csr, csr & PLL_VLD, 0, LOCK_TIMEOUT_US);
+}
+
+static int clk_pllv4_is_enabled(struct clk_hw *hw)
+{
+	struct clk_pllv4 *pll = to_clk_pllv4(hw);
+
+	if (readl_relaxed(pll->base) & PLL_EN)
+		return 1;
+
+	return 0;
+}
+
+static unsigned long clk_pllv4_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct clk_pllv4 *pll = to_clk_pllv4(hw);
+	u32 div;
+
+	div = readl_relaxed(pll->base + PLL_CFG_OFFSET);
+	div &= BM_PLL_MULT;
+	div >>= BP_PLL_MULT;
+
+	return parent_rate * div;
+}
+
+static long clk_pllv4_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	unsigned long round_rate, i;
+
+	for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) {
+		round_rate = parent_rate * pllv4_mult_table[i];
+		if (rate >= round_rate)
+			return round_rate;
+	}
+
+	return round_rate;
+}
+
+static bool clk_pllv4_is_valid_mult(unsigned int mult)
+{
+	int i;
+
+	/* check if mult is in valid MULT table */
+	for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) {
+		if (pllv4_mult_table[i] == mult)
+			return true;
+	}
+
+	return false;
+}
+
+static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long parent_rate)
+{
+	struct clk_pllv4 *pll = to_clk_pllv4(hw);
+	u32 val, mult;
+
+	mult = rate / parent_rate;
+
+	if (!clk_pllv4_is_valid_mult(mult))
+		return -EINVAL;
+
+	val = readl_relaxed(pll->base + PLL_CFG_OFFSET);
+	val &= ~BM_PLL_MULT;
+	val |= mult << BP_PLL_MULT;
+	writel_relaxed(val, pll->base + PLL_CFG_OFFSET);
+
+	return 0;
+}
+
+static int clk_pllv4_enable(struct clk_hw *hw)
+{
+	u32 val;
+	struct clk_pllv4 *pll = to_clk_pllv4(hw);
+
+	val = readl_relaxed(pll->base);
+	val |= PLL_EN;
+	writel_relaxed(val, pll->base);
+
+	return clk_pllv4_wait_lock(pll);
+}
+
+static void clk_pllv4_disable(struct clk_hw *hw)
+{
+	u32 val;
+	struct clk_pllv4 *pll = to_clk_pllv4(hw);
+
+	val = readl_relaxed(pll->base);
+	val &= ~PLL_EN;
+	writel_relaxed(val, pll->base);
+}
+
+static const struct clk_ops clk_pllv4_ops = {
+	.recalc_rate	= clk_pllv4_recalc_rate,
+	.round_rate	= clk_pllv4_round_rate,
+	.set_rate	= clk_pllv4_set_rate,
+	.enable		= clk_pllv4_enable,
+	.disable	= clk_pllv4_disable,
+	.is_enabled	= clk_pllv4_is_enabled,
+};
+
+struct clk_hw *imx_clk_pllv4(const char *name, const char *parent_name,
+			  void __iomem *base)
+{
+	struct clk_pllv4 *pll;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+
+	init.name = name;
+	init.ops = &clk_pllv4_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = CLK_SET_RATE_GATE;
+
+	pll->hw.init = &init;
+
+	hw = &pll->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pll);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index bb74934b357f..3364e080ccdf 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -42,6 +42,9 @@ enum imx_pllv3_type {
 struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
 		const char *parent_name, void __iomem *base, u32 div_mask);
 
+struct clk_hw *imx_clk_pllv4(const char *name, const char *parent_name,
+			     void __iomem *base);
+
 struct clk *clk_register_gate2(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 bit_idx, u8 cgr_val,
-- 
cgit v1.2.3-59-g8ed1b


From 9fcb6be3b6c994f275761b22800e4244f610bdc5 Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:01:47 +0000
Subject: clk: imx: add pfdv2 support

The pfdv2 is designed for PLL Fractional Divide (PFD) observed in System
Clock Generation (SCG) module in IMX ULP SoC series. e.g. i.MX7ULP.

NOTE pfdv2 can only be operated when clk is gated.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[sboyd@kernel.org: Include clk.h for sparse warnings]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile    |   3 +-
 drivers/clk/imx/clk-pfdv2.c | 203 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h       |   3 +
 3 files changed, 208 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-pfdv2.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 4cac28b21d05..e7248de5ffe1 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -13,7 +13,8 @@ obj-y += \
 	clk-pllv2.o \
 	clk-pllv3.o \
 	clk-pllv4.o \
-	clk-pfd.o
+	clk-pfd.o \
+	clk-pfdv2.o
 
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
diff --git a/drivers/clk/imx/clk-pfdv2.c b/drivers/clk/imx/clk-pfdv2.c
new file mode 100644
index 000000000000..7e9134b205ab
--- /dev/null
+++ b/drivers/clk/imx/clk-pfdv2.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+/**
+ * struct clk_pfdv2 - IMX PFD clock
+ * @clk_hw:	clock source
+ * @reg:	PFD register address
+ * @gate_bit:	Gate bit offset
+ * @vld_bit:	Valid bit offset
+ * @frac_off:	PLL Fractional Divider offset
+ */
+
+struct clk_pfdv2 {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		gate_bit;
+	u8		vld_bit;
+	u8		frac_off;
+};
+
+#define to_clk_pfdv2(_hw) container_of(_hw, struct clk_pfdv2, hw)
+
+#define CLK_PFDV2_FRAC_MASK 0x3f
+
+#define LOCK_TIMEOUT_US		USEC_PER_MSEC
+
+static DEFINE_SPINLOCK(pfd_lock);
+
+static int clk_pfdv2_wait(struct clk_pfdv2 *pfd)
+{
+	u32 val;
+
+	return readl_poll_timeout(pfd->reg, val, val & pfd->vld_bit,
+				  0, LOCK_TIMEOUT_US);
+}
+
+static int clk_pfdv2_enable(struct clk_hw *hw)
+{
+	struct clk_pfdv2 *pfd = to_clk_pfdv2(hw);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&pfd_lock, flags);
+	val = readl_relaxed(pfd->reg);
+	val &= ~pfd->gate_bit;
+	writel_relaxed(val, pfd->reg);
+	spin_unlock_irqrestore(&pfd_lock, flags);
+
+	return clk_pfdv2_wait(pfd);
+}
+
+static void clk_pfdv2_disable(struct clk_hw *hw)
+{
+	struct clk_pfdv2 *pfd = to_clk_pfdv2(hw);
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&pfd_lock, flags);
+	val = readl_relaxed(pfd->reg);
+	val |= pfd->gate_bit;
+	writel_relaxed(val, pfd->reg);
+	spin_unlock_irqrestore(&pfd_lock, flags);
+}
+
+static unsigned long clk_pfdv2_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct clk_pfdv2 *pfd = to_clk_pfdv2(hw);
+	u64 tmp = parent_rate;
+	u8 frac;
+
+	frac = (readl_relaxed(pfd->reg) >> pfd->frac_off)
+		& CLK_PFDV2_FRAC_MASK;
+
+	if (!frac) {
+		pr_debug("clk_pfdv2: %s invalid pfd frac value 0\n",
+			 clk_hw_get_name(hw));
+		return 0;
+	}
+
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static long clk_pfdv2_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *prate)
+{
+	u64 tmp = *prate;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+
+	tmp = *prate;
+	tmp *= 18;
+	do_div(tmp, frac);
+
+	return tmp;
+}
+
+static int clk_pfdv2_is_enabled(struct clk_hw *hw)
+{
+	struct clk_pfdv2 *pfd = to_clk_pfdv2(hw);
+
+	if (readl_relaxed(pfd->reg) & pfd->gate_bit)
+		return 0;
+
+	return 1;
+}
+
+static int clk_pfdv2_set_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long parent_rate)
+{
+	struct clk_pfdv2 *pfd = to_clk_pfdv2(hw);
+	unsigned long flags;
+	u64 tmp = parent_rate;
+	u32 val;
+	u8 frac;
+
+	tmp = tmp * 18 + rate / 2;
+	do_div(tmp, rate);
+	frac = tmp;
+	if (frac < 12)
+		frac = 12;
+	else if (frac > 35)
+		frac = 35;
+
+	spin_lock_irqsave(&pfd_lock, flags);
+	val = readl_relaxed(pfd->reg);
+	val &= ~(CLK_PFDV2_FRAC_MASK << pfd->frac_off);
+	val |= frac << pfd->frac_off;
+	writel_relaxed(val, pfd->reg);
+	spin_unlock_irqrestore(&pfd_lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_pfdv2_ops = {
+	.enable		= clk_pfdv2_enable,
+	.disable	= clk_pfdv2_disable,
+	.recalc_rate	= clk_pfdv2_recalc_rate,
+	.round_rate	= clk_pfdv2_round_rate,
+	.set_rate	= clk_pfdv2_set_rate,
+	.is_enabled     = clk_pfdv2_is_enabled,
+};
+
+struct clk_hw *imx_clk_pfdv2(const char *name, const char *parent_name,
+			     void __iomem *reg, u8 idx)
+{
+	struct clk_init_data init;
+	struct clk_pfdv2 *pfd;
+	struct clk_hw *hw;
+	int ret;
+
+	WARN_ON(idx > 3);
+
+	pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+	if (!pfd)
+		return ERR_PTR(-ENOMEM);
+
+	pfd->reg = reg;
+	pfd->gate_bit = 1 << ((idx + 1) * 8 - 1);
+	pfd->vld_bit = pfd->gate_bit - 1;
+	pfd->frac_off = idx * 8;
+
+	init.name = name;
+	init.ops = &clk_pfdv2_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = CLK_SET_RATE_GATE;
+
+	pfd->hw.init = &init;
+
+	hw = &pfd->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(pfd);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 3364e080ccdf..153d9a436ded 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -60,6 +60,9 @@ struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
 struct clk *imx_clk_pfd(const char *name, const char *parent_name,
 		void __iomem *reg, u8 idx);
 
+struct clk_hw *imx_clk_pfdv2(const char *name, const char *parent_name,
+			     void __iomem *reg, u8 idx);
+
 struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
 				 void __iomem *reg, u8 shift, u8 width,
 				 void __iomem *busy_reg, u8 busy_shift);
-- 
cgit v1.2.3-59-g8ed1b


From 76a323c19a1626b64ac69dbe5e187304ec58a6ca Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:01:51 +0000
Subject: clk: imx: add imx7ulp composite clk support

The imx composite clk is designed for Peripheral Clock Control (PCC)
module observed in IMX ULP SoC series.

NOTE pcc can only be operated when clk is gated.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[sboyd@kernel.org: Include clk.h for sparse warnings]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile             |  1 +
 drivers/clk/imx/clk-composite-7ulp.c | 87 ++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h                |  6 +++
 3 files changed, 94 insertions(+)
 create mode 100644 drivers/clk/imx/clk-composite-7ulp.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index e7248de5ffe1..a5cab3e5b7aa 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -4,6 +4,7 @@ obj-y += \
 	clk.o \
 	clk-busy.o \
 	clk-cpu.o \
+	clk-composite-7ulp.o \
 	clk-divider-gate.o \
 	clk-fixup-div.o \
 	clk-fixup-mux.o \
diff --git a/drivers/clk/imx/clk-composite-7ulp.c b/drivers/clk/imx/clk-composite-7ulp.c
new file mode 100644
index 000000000000..060f8600ea0d
--- /dev/null
+++ b/drivers/clk/imx/clk-composite-7ulp.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+#define PCG_PCS_SHIFT	24
+#define PCG_PCS_MASK	0x7
+#define PCG_CGC_SHIFT	30
+#define PCG_FRAC_SHIFT	3
+#define PCG_FRAC_WIDTH	1
+#define PCG_FRAC_MASK	BIT(3)
+#define PCG_PCD_SHIFT	0
+#define PCG_PCD_WIDTH	3
+#define PCG_PCD_MASK	0x7
+
+struct clk_hw *imx7ulp_clk_composite(const char *name,
+				     const char * const *parent_names,
+				     int num_parents, bool mux_present,
+				     bool rate_present, bool gate_present,
+				     void __iomem *reg)
+{
+	struct clk_hw *mux_hw = NULL, *fd_hw = NULL, *gate_hw = NULL;
+	struct clk_fractional_divider *fd = NULL;
+	struct clk_gate *gate = NULL;
+	struct clk_mux *mux = NULL;
+	struct clk_hw *hw;
+
+	if (mux_present) {
+		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+		if (!mux)
+			return ERR_PTR(-ENOMEM);
+		mux_hw = &mux->hw;
+		mux->reg = reg;
+		mux->shift = PCG_PCS_SHIFT;
+		mux->mask = PCG_PCS_MASK;
+	}
+
+	if (rate_present) {
+		fd = kzalloc(sizeof(*fd), GFP_KERNEL);
+		if (!fd) {
+			kfree(mux);
+			return ERR_PTR(-ENOMEM);
+		}
+		fd_hw = &fd->hw;
+		fd->reg = reg;
+		fd->mshift = PCG_FRAC_SHIFT;
+		fd->mwidth = PCG_FRAC_WIDTH;
+		fd->mmask  = PCG_FRAC_MASK;
+		fd->nshift = PCG_PCD_SHIFT;
+		fd->nwidth = PCG_PCD_WIDTH;
+		fd->nmask = PCG_PCD_MASK;
+		fd->flags = CLK_FRAC_DIVIDER_ZERO_BASED;
+	}
+
+	if (gate_present) {
+		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+		if (!gate) {
+			kfree(mux);
+			kfree(fd);
+			return ERR_PTR(-ENOMEM);
+		}
+		gate_hw = &gate->hw;
+		gate->reg = reg;
+		gate->bit_idx = PCG_CGC_SHIFT;
+	}
+
+	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
+				       mux_hw, &clk_mux_ops, fd_hw,
+				       &clk_fractional_divider_ops, gate_hw,
+				       &clk_gate_ops, CLK_SET_RATE_GATE |
+				       CLK_SET_PARENT_GATE);
+	if (IS_ERR(hw)) {
+		kfree(mux);
+		kfree(fd);
+		kfree(gate);
+	}
+
+	return hw;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 153d9a436ded..ece7097d2cbc 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -71,6 +71,12 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
 			     const char **parent_names, int num_parents);
 
+struct clk_hw *imx7ulp_clk_composite(const char *name,
+				     const char * const *parent_names,
+				     int num_parents, bool mux_present,
+				     bool rate_present, bool gate_present,
+				     void __iomem *reg);
+
 struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
 				  void __iomem *reg, u8 shift, u8 width,
 				  void (*fixup)(u32 *val));
-- 
cgit v1.2.3-59-g8ed1b


From 9e5ef7a57ca75a1b9411c46caeeb6881124284a3 Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:02:00 +0000
Subject: clk: imx: make mux parent strings const

As the commit 2893c379461a ("clk: make strings in parent name arrays
const"), let's make the parent strings const, otherwise we may meet
the following warning when compiling:

drivers/clk/imx/clk-imx7ulp.c: In function 'imx7ulp_clocks_init':
drivers/clk/imx/clk-imx7ulp.c:73:35: warning: passing argument 5 of
	'imx_clk_mux_flags' discards 'const' qualifier from pointer target type

  clks[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_mux_flags("apll_pre_sel", base + 0x508, 0,
	1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
                                   ^
In file included from drivers/clk/imx/clk-imx7ulp.c:23:0:
drivers/clk/imx/clk.h:200:27: note: expected 'const char **' but argument is
 of type 'const char * const*'
...

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk-busy.c      |  2 +-
 drivers/clk/imx/clk-fixup-mux.c |  2 +-
 drivers/clk/imx/clk.h           | 18 +++++++++++-------
 3 files changed, 13 insertions(+), 9 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-busy.c b/drivers/clk/imx/clk-busy.c
index 99036527eb0d..e695622c5aa5 100644
--- a/drivers/clk/imx/clk-busy.c
+++ b/drivers/clk/imx/clk-busy.c
@@ -154,7 +154,7 @@ static const struct clk_ops clk_busy_mux_ops = {
 
 struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
-			     const char **parent_names, int num_parents)
+			     const char * const *parent_names, int num_parents)
 {
 	struct clk_busy_mux *busy;
 	struct clk *clk;
diff --git a/drivers/clk/imx/clk-fixup-mux.c b/drivers/clk/imx/clk-fixup-mux.c
index c9b327e0a8dd..44817c1b0b88 100644
--- a/drivers/clk/imx/clk-fixup-mux.c
+++ b/drivers/clk/imx/clk-fixup-mux.c
@@ -70,7 +70,7 @@ static const struct clk_ops clk_fixup_mux_ops = {
 };
 
 struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
-			      u8 shift, u8 width, const char **parents,
+			      u8 shift, u8 width, const char * const *parents,
 			      int num_parents, void (*fixup)(u32 *val))
 {
 	struct clk_fixup_mux *fixup_mux;
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index ece7097d2cbc..26b7720e64cb 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -69,7 +69,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
 
 struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
-			     const char **parent_names, int num_parents);
+			     const char * const *parent_names, int num_parents);
 
 struct clk_hw *imx7ulp_clk_composite(const char *name,
 				     const char * const *parent_names,
@@ -82,7 +82,7 @@ struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
 				  void (*fixup)(u32 *val));
 
 struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
-			      u8 shift, u8 width, const char **parents,
+			      u8 shift, u8 width, const char * const *parents,
 			      int num_parents, void (*fixup)(u32 *val));
 
 static inline struct clk *imx_clk_fixed(const char *name, int rate)
@@ -91,7 +91,8 @@ static inline struct clk *imx_clk_fixed(const char *name, int rate)
 }
 
 static inline struct clk *imx_clk_mux_ldb(const char *name, void __iomem *reg,
-		u8 shift, u8 width, const char **parents, int num_parents)
+			u8 shift, u8 width, const char * const *parents,
+			int num_parents)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT, reg,
@@ -211,7 +212,8 @@ static inline struct clk *imx_clk_gate4(const char *name, const char *parent,
 }
 
 static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
-		u8 shift, u8 width, const char **parents, int num_parents)
+			u8 shift, u8 width, const char * const *parents,
+			int num_parents)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			CLK_SET_RATE_NO_REPARENT, reg, shift,
@@ -219,7 +221,8 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 }
 
 static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg,
-		u8 shift, u8 width, const char **parents, int num_parents)
+			u8 shift, u8 width, const char * const *parents,
+			int num_parents)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE,
@@ -227,8 +230,9 @@ static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg,
 }
 
 static inline struct clk *imx_clk_mux_flags(const char *name,
-		void __iomem *reg, u8 shift, u8 width, const char **parents,
-		int num_parents, unsigned long flags)
+			void __iomem *reg, u8 shift, u8 width,
+			const char * const *parents, int num_parents,
+			unsigned long flags)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0,
-- 
cgit v1.2.3-59-g8ed1b


From 3b315214e09167c2dbcc5d9d5c999237e47ed182 Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:02:04 +0000
Subject: clk: imx: implement new clk_hw based APIs

Clock providers are recommended to use the new struct clk_hw based API,
so implement IMX clk_hw based provider helpers functions to the new
approach.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk.c | 22 ++++++++++++++++++
 drivers/clk/imx/clk.h | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk.c b/drivers/clk/imx/clk.c
index 9074e6974b6d..1efed86217f7 100644
--- a/drivers/clk/imx/clk.c
+++ b/drivers/clk/imx/clk.c
@@ -18,6 +18,16 @@ void __init imx_check_clocks(struct clk *clks[], unsigned int count)
 			       i, PTR_ERR(clks[i]));
 }
 
+void imx_check_clk_hws(struct clk_hw *clks[], unsigned int count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i++)
+		if (IS_ERR(clks[i]))
+			pr_err("i.MX clk %u: register failed with %ld\n",
+			       i, PTR_ERR(clks[i]));
+}
+
 static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name)
 {
 	struct of_phandle_args phandle;
@@ -49,6 +59,18 @@ struct clk * __init imx_obtain_fixed_clock(
 	return clk;
 }
 
+struct clk_hw * __init imx_obtain_fixed_clk_hw(struct device_node *np,
+					       const char *name)
+{
+	struct clk *clk;
+
+	clk = of_clk_get_by_name(np, name);
+	if (IS_ERR(clk))
+		return ERR_PTR(-ENOENT);
+
+	return __clk_get_hw(clk);
+}
+
 /*
  * This fixups the register CCM_CSCMR1 write value.
  * The write/read/divider values of the aclk_podf field
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 26b7720e64cb..a34b93e48e0b 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -8,6 +8,7 @@
 extern spinlock_t imx_ccm_lock;
 
 void imx_check_clocks(struct clk *clks[], unsigned int count);
+void imx_check_clk_hws(struct clk_hw *clks[], unsigned int count);
 void imx_register_uart_clocks(struct clk ** const clks[]);
 
 extern void imx_cscmr1_fixup(u32 *val);
@@ -54,6 +55,9 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 struct clk * imx_obtain_fixed_clock(
 			const char *name, unsigned long rate);
 
+struct clk_hw *imx_obtain_fixed_clk_hw(struct device_node *np,
+				       const char *name);
+
 struct clk *imx_clk_gate_exclusive(const char *name, const char *parent,
 	 void __iomem *reg, u8 shift, u32 exclusive_mask);
 
@@ -90,6 +94,16 @@ static inline struct clk *imx_clk_fixed(const char *name, int rate)
 	return clk_register_fixed_rate(NULL, name, NULL, 0, rate);
 }
 
+static inline struct clk_hw *imx_clk_hw_fixed(const char *name, int rate)
+{
+	return clk_hw_register_fixed_rate(NULL, name, NULL, 0, rate);
+}
+
+static inline struct clk_hw *imx_get_clk_hw_fixed(const char *name, int rate)
+{
+	return clk_hw_register_fixed_rate(NULL, name, NULL, 0, rate);
+}
+
 static inline struct clk *imx_clk_mux_ldb(const char *name, void __iomem *reg,
 			u8 shift, u8 width, const char * const *parents,
 			int num_parents)
@@ -113,6 +127,15 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent,
 			reg, shift, width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_clk_hw_divider(const char *name,
+						const char *parent,
+						void __iomem *reg, u8 shift,
+						u8 width)
+{
+	return clk_hw_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+				       reg, shift, width, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_divider_flags(const char *name,
 		const char *parent, void __iomem *reg, u8 shift, u8 width,
 		unsigned long flags)
@@ -121,6 +144,15 @@ static inline struct clk *imx_clk_divider_flags(const char *name,
 			reg, shift, width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_clk_hw_divider_flags(const char *name,
+						   const char *parent,
+						   void __iomem *reg, u8 shift,
+						   u8 width, unsigned long flags)
+{
+	return clk_hw_register_divider(NULL, name, parent, flags,
+				       reg, shift, width, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_divider2(const char *name, const char *parent,
 		void __iomem *reg, u8 shift, u8 width)
 {
@@ -143,6 +175,13 @@ static inline struct clk *imx_clk_gate_flags(const char *name, const char *paren
 			shift, 0, &imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_clk_hw_gate(const char *name, const char *parent,
+					     void __iomem *reg, u8 shift)
+{
+	return clk_hw_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+				    shift, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {
@@ -229,6 +268,17 @@ static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg,
 			reg, shift, width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_clk_hw_mux2(const char *name, void __iomem *reg,
+					     u8 shift, u8 width,
+					     const char * const *parents,
+					     int num_parents)
+{
+	return clk_hw_register_mux(NULL, name, parents, num_parents,
+				   CLK_SET_RATE_NO_REPARENT |
+				   CLK_OPS_PARENT_ENABLE,
+				   reg, shift, width, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_mux_flags(const char *name,
 			void __iomem *reg, u8 shift, u8 width,
 			const char * const *parents, int num_parents,
@@ -239,6 +289,18 @@ static inline struct clk *imx_clk_mux_flags(const char *name,
 			&imx_ccm_lock);
 }
 
+static inline struct clk_hw *imx_clk_hw_mux_flags(const char *name,
+						  void __iomem *reg, u8 shift,
+						  u8 width,
+						  const char * const *parents,
+						  int num_parents,
+						  unsigned long flags)
+{
+	return clk_hw_register_mux(NULL, name, parents, num_parents,
+				   flags | CLK_SET_RATE_NO_REPARENT,
+				   reg, shift, width, 0, &imx_ccm_lock);
+}
+
 struct clk *imx_clk_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
-- 
cgit v1.2.3-59-g8ed1b


From b1260067ac3dd5dcd40bcbcb2cc116a9f8b5016b Mon Sep 17 00:00:00 2001
From: "A.s. Dong" <aisheng.dong@nxp.com>
Date: Wed, 14 Nov 2018 13:02:08 +0000
Subject: clk: imx: add imx7ulp clk driver

i.MX7ULP Clock functions are under joint control of the System
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
modules, and Core Mode Controller (CMC)1 blocks

The clocking scheme provides clear separation between M4 domain
and A7 domain. Except for a few clock sources shared between two
domains, such as the System Oscillator clock, the Slow IRC (SIRC),
and and the Fast IRC clock (FIRCLK), clock sources and clock
management are separated and contained within each domain.

M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules.
A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules.

This driver only adds clock support in A7 domain.

Note that most clocks required to be operated when gated, e.g. pll,
pfd, pcc. And more special cases that scs/ddr/nic mux selecting
different clock source requires that clock to be enabled first,
then we need set CLK_OPS_PARENT_ENABLE flag for them properly.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile      |   1 +
 drivers/clk/imx/clk-imx7ulp.c | 220 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 221 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx7ulp.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index a5cab3e5b7aa..615b413c5681 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -30,4 +30,5 @@ obj-$(CONFIG_SOC_IMX6SLL) += clk-imx6sll.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += clk-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D)  += clk-imx7d.o
+obj-$(CONFIG_SOC_IMX7ULP) += clk-imx7ulp.o
 obj-$(CONFIG_SOC_VF610)  += clk-vf610.o
diff --git a/drivers/clk/imx/clk-imx7ulp.c b/drivers/clk/imx/clk-imx7ulp.c
new file mode 100644
index 000000000000..3b7507ff7869
--- /dev/null
+++ b/drivers/clk/imx/clk-imx7ulp.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017~2018 NXP
+ *
+ * Author: Dong Aisheng <aisheng.dong@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/imx7ulp-clock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+static const char * const pll_pre_sels[]	= { "sosc", "firc", };
+static const char * const spll_pfd_sels[]	= { "spll_pfd0", "spll_pfd1", "spll_pfd2", "spll_pfd3", };
+static const char * const spll_sels[]		= { "spll", "spll_pfd_sel", };
+static const char * const apll_pfd_sels[]	= { "apll_pfd0", "apll_pfd1", "apll_pfd2", "apll_pfd3", };
+static const char * const apll_sels[]		= { "apll", "apll_pfd_sel", };
+static const char * const scs_sels[]		= { "dummy", "sosc", "sirc", "firc", "dummy", "apll_sel", "spll_sel", "upll", };
+static const char * const ddr_sels[]		= { "apll_pfd_sel", "upll", };
+static const char * const nic_sels[]		= { "firc", "ddr_clk", };
+static const char * const periph_plat_sels[]	= { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
+static const char * const periph_bus_sels[]	= { "dummy", "sosc_bus_clk", "mpll", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
+
+/* used by sosc/sirc/firc/ddr/spll/apll dividers */
+static const struct clk_div_table ulp_div_table[] = {
+	{ .val = 1, .div = 1, },
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 4, },
+	{ .val = 4, .div = 8, },
+	{ .val = 5, .div = 16, },
+	{ .val = 6, .div = 32, },
+	{ .val = 7, .div = 64, },
+};
+
+static void __init imx7ulp_clk_scg1_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_SCG1_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_SCG1_END;
+	clks = clk_data->hws;
+
+	clks[IMX7ULP_CLK_DUMMY]		= imx_clk_hw_fixed("dummy", 0);
+
+	clks[IMX7ULP_CLK_ROSC]		= imx_obtain_fixed_clk_hw(np, "rosc");
+	clks[IMX7ULP_CLK_SOSC]		= imx_obtain_fixed_clk_hw(np, "sosc");
+	clks[IMX7ULP_CLK_SIRC]		= imx_obtain_fixed_clk_hw(np, "sirc");
+	clks[IMX7ULP_CLK_FIRC]		= imx_obtain_fixed_clk_hw(np, "firc");
+	clks[IMX7ULP_CLK_MIPI_PLL]	= imx_obtain_fixed_clk_hw(np, "mpll");
+	clks[IMX7ULP_CLK_UPLL]		= imx_obtain_fixed_clk_hw(np, "upll");
+
+	/* SCG1 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	/* NOTE: xPLL config can't be changed when xPLL is enabled */
+	clks[IMX7ULP_CLK_APLL_PRE_SEL]	= imx_clk_hw_mux_flags("apll_pre_sel", base + 0x508, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_PRE_SEL]	= imx_clk_hw_mux_flags("spll_pre_sel", base + 0x608, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
+
+	/*							   name		    parent_name	   reg			shift	width	flags */
+	clks[IMX7ULP_CLK_APLL_PRE_DIV]	= imx_clk_hw_divider_flags("apll_pre_div", "apll_pre_sel", base + 0x508,	8,	3,	CLK_SET_RATE_GATE);
+	clks[IMX7ULP_CLK_SPLL_PRE_DIV]	= imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608,	8,	3,	CLK_SET_RATE_GATE);
+
+	/*						name	 parent_name	 base */
+	clks[IMX7ULP_CLK_APLL]		= imx_clk_pllv4("apll",  "apll_pre_div", base + 0x500);
+	clks[IMX7ULP_CLK_SPLL]		= imx_clk_pllv4("spll",  "spll_pre_div", base + 0x600);
+
+	/* APLL PFDs */
+	clks[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
+	clks[IMX7ULP_CLK_APLL_PFD1]	= imx_clk_pfdv2("apll_pfd1", "apll", base + 0x50c, 1);
+	clks[IMX7ULP_CLK_APLL_PFD2]	= imx_clk_pfdv2("apll_pfd2", "apll", base + 0x50c, 2);
+	clks[IMX7ULP_CLK_APLL_PFD3]	= imx_clk_pfdv2("apll_pfd3", "apll", base + 0x50c, 3);
+
+	/* SPLL PFDs */
+	clks[IMX7ULP_CLK_SPLL_PFD0]	= imx_clk_pfdv2("spll_pfd0", "spll", base + 0x60C, 0);
+	clks[IMX7ULP_CLK_SPLL_PFD1]	= imx_clk_pfdv2("spll_pfd1", "spll", base + 0x60C, 1);
+	clks[IMX7ULP_CLK_SPLL_PFD2]	= imx_clk_pfdv2("spll_pfd2", "spll", base + 0x60C, 2);
+	clks[IMX7ULP_CLK_SPLL_PFD3]	= imx_clk_pfdv2("spll_pfd3", "spll", base + 0x60C, 3);
+
+	/* PLL Mux */
+	clks[IMX7ULP_CLK_APLL_PFD_SEL]	= imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_PFD_SEL]	= imx_clk_hw_mux_flags("spll_pfd_sel", base + 0x608, 14, 2, spll_pfd_sels, ARRAY_SIZE(spll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_APLL_SEL]	= imx_clk_hw_mux_flags("apll_sel", base + 0x508, 1, 1, apll_sels, ARRAY_SIZE(apll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+	clks[IMX7ULP_CLK_SPLL_SEL]	= imx_clk_hw_mux_flags("spll_sel", base + 0x608, 1, 1, spll_sels, ARRAY_SIZE(spll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
+
+	clks[IMX7ULP_CLK_SPLL_BUS_CLK]	= imx_clk_divider_gate("spll_bus_clk", "spll_sel", CLK_SET_RATE_GATE, base + 0x604, 8, 3, 0, ulp_div_table, &imx_ccm_lock);
+
+	/* scs/ddr/nic select different clock source requires that clock to be enabled first */
+	clks[IMX7ULP_CLK_SYS_SEL]	= imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
+	clks[IMX7ULP_CLK_NIC_SEL]	= imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
+	clks[IMX7ULP_CLK_DDR_SEL]	= imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 1, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
+
+	clks[IMX7ULP_CLK_CORE_DIV]	= imx_clk_hw_divider_flags("divcore",	"scs_sel",  base + 0x14, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX7ULP_CLK_DDR_DIV]	= imx_clk_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
+							       0, ulp_div_table, &imx_ccm_lock);
+
+	clks[IMX7ULP_CLK_NIC0_DIV]	= imx_clk_hw_divider_flags("nic0_clk",		"nic_sel",  base + 0x40, 24, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX7ULP_CLK_NIC1_DIV]	= imx_clk_hw_divider_flags("nic1_clk",		"nic0_clk", base + 0x40, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+	clks[IMX7ULP_CLK_NIC1_BUS_DIV]	= imx_clk_hw_divider_flags("nic1_bus_clk",	"nic1_clk", base + 0x40, 4,  4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+	clks[IMX7ULP_CLK_GPU_DIV]	= imx_clk_hw_divider("gpu_clk", "nic0_clk", base + 0x40, 20, 4);
+
+	clks[IMX7ULP_CLK_SOSC_BUS_CLK]	= imx_clk_divider_gate("sosc_bus_clk", "sosc", 0, base + 0x104, 8, 3,
+							       CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
+	clks[IMX7ULP_CLK_FIRC_BUS_CLK]	= imx_clk_divider_gate("firc_bus_clk", "firc", 0, base + 0x304, 8, 3,
+							       CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_scg1, "fsl,imx7ulp-scg1", imx7ulp_clk_scg1_init);
+
+static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_PCC2_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_PCC2_END;
+	clks = clk_data->hws;
+
+	/* PCC2 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX7ULP_CLK_DMA1]		= imx_clk_hw_gate("dma1", "nic1_clk", base + 0x20, 30);
+	clks[IMX7ULP_CLK_RGPIO2P1]	= imx_clk_hw_gate("rgpio2p1", "nic1_bus_clk", base + 0x3c, 30);
+	clks[IMX7ULP_CLK_DMA_MUX1]	= imx_clk_hw_gate("dma_mux1", "nic1_bus_clk", base + 0x84, 30);
+	clks[IMX7ULP_CLK_SNVS]		= imx_clk_hw_gate("snvs", "nic1_bus_clk", base + 0x8c, 30);
+	clks[IMX7ULP_CLK_CAAM]		= imx_clk_hw_gate("caam", "nic1_clk", base + 0x90, 30);
+	clks[IMX7ULP_CLK_LPTPM4]	= imx7ulp_clk_composite("lptpm4",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
+	clks[IMX7ULP_CLK_LPTPM5]	= imx7ulp_clk_composite("lptpm5",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
+	clks[IMX7ULP_CLK_LPIT1]		= imx7ulp_clk_composite("lpit1",   periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
+	clks[IMX7ULP_CLK_LPSPI2]	= imx7ulp_clk_composite("lpspi2",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa4);
+	clks[IMX7ULP_CLK_LPSPI3]	= imx7ulp_clk_composite("lpspi3",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa8);
+	clks[IMX7ULP_CLK_LPI2C4]	= imx7ulp_clk_composite("lpi2c4",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xac);
+	clks[IMX7ULP_CLK_LPI2C5]	= imx7ulp_clk_composite("lpi2c5",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb0);
+	clks[IMX7ULP_CLK_LPUART4]	= imx7ulp_clk_composite("lpuart4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb4);
+	clks[IMX7ULP_CLK_LPUART5]	= imx7ulp_clk_composite("lpuart5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb8);
+	clks[IMX7ULP_CLK_FLEXIO1]	= imx7ulp_clk_composite("flexio1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xc4);
+	clks[IMX7ULP_CLK_USB0]		= imx7ulp_clk_composite("usb0",    periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xcc);
+	clks[IMX7ULP_CLK_USB1]		= imx7ulp_clk_composite("usb1",    periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xd0);
+	clks[IMX7ULP_CLK_USB_PHY]	= imx_clk_hw_gate("usb_phy", "nic1_bus_clk", base + 0xd4, 30);
+	clks[IMX7ULP_CLK_USDHC0]	= imx7ulp_clk_composite("usdhc0",  periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xdc);
+	clks[IMX7ULP_CLK_USDHC1]	= imx7ulp_clk_composite("usdhc1",  periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xe0);
+	clks[IMX7ULP_CLK_WDG1]		= imx7ulp_clk_composite("wdg1",    periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0xf4);
+	clks[IMX7ULP_CLK_WDG2]		= imx7ulp_clk_composite("sdg2",    periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0x10c);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
+
+static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	void __iomem *base;
+
+	clk_data = kzalloc(sizeof(*clk_data) + sizeof(*clk_data->hws) *
+			   IMX7ULP_CLK_PCC3_END, GFP_KERNEL);
+	if (!clk_data)
+		return;
+
+	clk_data->num = IMX7ULP_CLK_PCC3_END;
+	clks = clk_data->hws;
+
+	/* PCC3 */
+	base = of_iomap(np, 0);
+	WARN_ON(!base);
+
+	clks[IMX7ULP_CLK_LPTPM6]	= imx7ulp_clk_composite("lptpm6",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x84);
+	clks[IMX7ULP_CLK_LPTPM7]	= imx7ulp_clk_composite("lptpm7",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x88);
+
+	clks[IMX7ULP_CLK_MMDC]		= clk_hw_register_gate(NULL, "mmdc", "nic1_clk", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+							       base + 0xac, 30, 0, &imx_ccm_lock);
+	clks[IMX7ULP_CLK_LPI2C6]	= imx7ulp_clk_composite("lpi2c6",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x90);
+	clks[IMX7ULP_CLK_LPI2C7]	= imx7ulp_clk_composite("lpi2c7",  periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
+	clks[IMX7ULP_CLK_LPUART6]	= imx7ulp_clk_composite("lpuart6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
+	clks[IMX7ULP_CLK_LPUART7]	= imx7ulp_clk_composite("lpuart7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
+	clks[IMX7ULP_CLK_DSI]		= imx7ulp_clk_composite("dsi",     periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true,  true, base + 0xa4);
+	clks[IMX7ULP_CLK_LCDIF]		= imx7ulp_clk_composite("lcdif",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true,  true, base + 0xa8);
+
+	clks[IMX7ULP_CLK_VIU]		= imx_clk_hw_gate("viu",   "nic1_clk",	   base + 0xa0, 30);
+	clks[IMX7ULP_CLK_PCTLC]		= imx_clk_hw_gate("pctlc", "nic1_bus_clk", base + 0xb8, 30);
+	clks[IMX7ULP_CLK_PCTLD]		= imx_clk_hw_gate("pctld", "nic1_bus_clk", base + 0xbc, 30);
+	clks[IMX7ULP_CLK_PCTLE]		= imx_clk_hw_gate("pctle", "nic1_bus_clk", base + 0xc0, 30);
+	clks[IMX7ULP_CLK_PCTLF]		= imx_clk_hw_gate("pctlf", "nic1_bus_clk", base + 0xc4, 30);
+
+	clks[IMX7ULP_CLK_GPU3D]		= imx7ulp_clk_composite("gpu3d",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x140);
+	clks[IMX7ULP_CLK_GPU2D]		= imx7ulp_clk_composite("gpu2d",   periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x144);
+
+	imx_check_clk_hws(clks, clk_data->num);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
-- 
cgit v1.2.3-59-g8ed1b


From 33e7a8422546b5cd65d4af4dfe4ed92ea543d8df Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Sun, 9 Dec 2018 15:08:32 +0000
Subject: clk: imx: remove redundant initialization of ret to zero

The initialization of ret is redundant as it is being re-assigned to
the return value from the call to imx8m_clk_composite_compute_dividers.
Clean this up by removing the initialization.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk-composite-8m.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-composite-8m.c b/drivers/clk/imx/clk-composite-8m.c
index 6d9d3714b4df..527ade1d6933 100644
--- a/drivers/clk/imx/clk-composite-8m.c
+++ b/drivers/clk/imx/clk-composite-8m.c
@@ -93,7 +93,7 @@ static int imx8m_clk_composite_divider_set_rate(struct clk_hw *hw,
 	unsigned long flags = 0;
 	int prediv_value;
 	int div_value;
-	int ret = 0;
+	int ret;
 	u32 val;
 
 	ret = imx8m_clk_composite_compute_dividers(rate, parent_rate,
-- 
cgit v1.2.3-59-g8ed1b


From 0efcc2c0fd2001a83240a8c3d71f67770484917e Mon Sep 17 00:00:00 2001
From: Anson Huang <anson.huang@nxp.com>
Date: Fri, 30 Nov 2018 07:23:47 +0000
Subject: clk: imx6sl: ensure MMDC CH0 handshake is bypassed

Same as other i.MX6 SoCs, ensure unused MMDC channel's
handshake is bypassed, this is to make sure no request
signal will be generated when periphe_clk_sel is changed
or SRC warm reset is triggered.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk-imx6sl.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 6fcfbbd907a5..e13d8814cfa4 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -17,6 +17,8 @@
 
 #include "clk.h"
 
+#define CCDR				0x4
+#define BM_CCM_CCDR_MMDC_CH0_MASK	(1 << 17)
 #define CCSR			0xc
 #define BM_CCSR_PLL1_SW_CLK_SEL	(1 << 2)
 #define CACRR			0x10
@@ -411,6 +413,10 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_USDHC3]       = imx_clk_gate2("usdhc3",       "usdhc3_podf",       base + 0x80, 6);
 	clks[IMX6SL_CLK_USDHC4]       = imx_clk_gate2("usdhc4",       "usdhc4_podf",       base + 0x80, 8);
 
+	/* Ensure the MMDC CH0 handshake is bypassed */
+	writel_relaxed(readl_relaxed(base + CCDR) |
+		BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR);
+
 	imx_check_clocks(clks, ARRAY_SIZE(clks));
 
 	clk_data.clks = clks;
-- 
cgit v1.2.3-59-g8ed1b


From 929914946fa615889d176568b175984e5128e0a3 Mon Sep 17 00:00:00 2001
From: Anson Huang <anson.huang@nxp.com>
Date: Fri, 30 Nov 2018 06:31:40 +0000
Subject: clk: imx6q: add DCICx clocks gate

On i.MX6QP/i.MX6Q/i.MX6DL, there are DCIC1/DCIC2 clocks
gate in CCM_CCGR0 register, add them into clock tree for
clock management.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk-imx6q.c               | 2 ++
 include/dt-bindings/clock/imx6qdl-clock.h | 4 +++-
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index bbe0c60f4d09..31a9d942d0b0 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -737,6 +737,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_CAN1_SERIAL]  = imx_clk_gate2("can1_serial",   "can_root",          base + 0x68, 16);
 	clk[IMX6QDL_CLK_CAN2_IPG]     = imx_clk_gate2("can2_ipg",      "ipg",               base + 0x68, 18);
 	clk[IMX6QDL_CLK_CAN2_SERIAL]  = imx_clk_gate2("can2_serial",   "can_root",          base + 0x68, 20);
+	clk[IMX6QDL_CLK_DCIC1]        = imx_clk_gate2("dcic1",         "ipu1_podf",         base + 0x68, 24);
+	clk[IMX6QDL_CLK_DCIC2]        = imx_clk_gate2("dcic2",         "ipu2_podf",         base + 0x68, 26);
 	clk[IMX6QDL_CLK_ECSPI1]       = imx_clk_gate2("ecspi1",        "ecspi_root",        base + 0x6c, 0);
 	clk[IMX6QDL_CLK_ECSPI2]       = imx_clk_gate2("ecspi2",        "ecspi_root",        base + 0x6c, 2);
 	clk[IMX6QDL_CLK_ECSPI3]       = imx_clk_gate2("ecspi3",        "ecspi_root",        base + 0x6c, 4);
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 87b068f4a998..b3cef297d5df 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -274,6 +274,8 @@
 #define IMX6QDL_CLK_EPIT1			261
 #define IMX6QDL_CLK_EPIT2			262
 #define IMX6QDL_CLK_MMDC_P0_IPG			263
-#define IMX6QDL_CLK_END				264
+#define IMX6QDL_CLK_DCIC1			264
+#define IMX6QDL_CLK_DCIC2			265
+#define IMX6QDL_CLK_END				266
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
-- 
cgit v1.2.3-59-g8ed1b


From f7542d817733f461258fd3a47d77da35b2d9fc81 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Thu, 15 Nov 2018 15:30:26 +0100
Subject: clk: imx6q: reset exclusive gates on init

The exclusive gates may be set up in the wrong way by software running
before the clock driver comes up. In that case the exclusive setup is
locked in its initial state, as the complementary function can't be
activated without disabling the initial setup first.

To avoid this lock situation, reset the exclusive gates to the off
state and allow the kernel to provide the proper setup.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk-imx6q.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index bbe0c60f4d09..59f6a3e087db 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -508,8 +508,12 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
 	 * independently configured as clock inputs or outputs.  We treat
 	 * the "output_enable" bit as a gate, even though it's really just
-	 * enabling clock output.
+	 * enabling clock output. Initially the gate bits are cleared, as
+	 * otherwise the exclusive configuration gets locked in the setup done
+	 * by software running before the clock driver, with no way to change
+	 * it.
 	 */
+	writel(readl(base + 0x160) & ~0x3c00, base + 0x160);
 	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12));
 	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13));
 
-- 
cgit v1.2.3-59-g8ed1b


From a29be9185d195bf5abd5ff5482a26800d58bac19 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Thu, 15 Nov 2018 15:30:27 +0100
Subject: clk: imx6q: optionally get CCM inputs via standard clock handles

When specifying external clock inputs to the CCM the current code
requires the clocks to be in a "clocks" child node of the DT root.
This is not really conformant with DT best practices.

To avoid the need to deviate from those best practices, allow the
clock inputs to be specified via standard clock handles. This is
in line with how drivers of the later CCM driver revisions on
newer i.MX SoCs handle this.

As we can't retroactively change the DT binding, allow this as an
option with a fallback to the old way of how this has been handled.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 .../devicetree/bindings/clock/imx6q-clock.txt      |  3 +++
 drivers/clk/imx/clk-imx6q.c                        | 22 +++++++++++++++++-----
 2 files changed, 20 insertions(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index e1308346e00d..13d36d4c6991 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -13,6 +13,9 @@ Optional properties:
   management IC (PMIC) triggered via PMIC_STBY_REQ signal.
   Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
   be using "syscon-poweroff" driver instead.
+- clocks: list of clock specifiers, must contain an entry for each entry
+          in clock-names
+- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
 
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index 59f6a3e087db..bd53c403bcc1 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -414,12 +414,24 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	int ret;
 
 	clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
-	clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
-	clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
-	clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+	clk[IMX6QDL_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil");
+	if (IS_ERR(clk[IMX6QDL_CLK_CKIL]))
+		clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
+	clk[IMX6QDL_CLK_CKIH] = of_clk_get_by_name(ccm_node, "ckih1");
+	if (IS_ERR(clk[IMX6QDL_CLK_CKIH]))
+		clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
+	clk[IMX6QDL_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc");
+	if (IS_ERR(clk[IMX6QDL_CLK_OSC]))
+		clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+
 	/* Clock source from external clock via CLK1/2 PADs */
-	clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
-	clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
+	clk[IMX6QDL_CLK_ANACLK1] = of_clk_get_by_name(ccm_node, "anaclk1");
+	if (IS_ERR(clk[IMX6QDL_CLK_ANACLK1]))
+		clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+
+	clk[IMX6QDL_CLK_ANACLK2] = of_clk_get_by_name(ccm_node, "anaclk2");
+	if (IS_ERR(clk[IMX6QDL_CLK_ANACLK2]))
+		clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	anatop_base = base = of_iomap(np, 0);
-- 
cgit v1.2.3-59-g8ed1b


From 3cc48976e9763209ccf0ccc47c8e3e5fc464c557 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Thu, 15 Nov 2018 15:30:28 +0100
Subject: clk: imx6q: handle ENET PLL bypass

The ENET PLL is different from the other i.MX6 PLLs, as it has
multiple outputs with different post-dividers, which are all
bypassed if the single bypass bit is activated. The hardware setup
looks something like this:
                                _
refclk-o---PLL---o----DIV1-----| \
       |         |             |M |----OUT1
       o-----------------------|_/
       |         |              _
       |         o----DIV2-----| \
       |         |             |M |----OUT2
       o-----------------------|_/
       |         |              _
       |         `----DIV3-----| \
       |                       |M |----OUT3
       `-----------------------|_/

The bypass bit not only bypasses the PLL, but also the attached
post-dividers. This would be reasonbly straight forward to model
with a single output, or with different bypass bits for each output,
but sadly the HW guys decided that it would be good to actuate all
3 muxes with a single bit.

So the need to have the PLL bypassed for one of the outputs always
affects 2 other (in our model) independent branches of the clock
tree.

This means the decision to bypass this PLL is a system wide design
choice and should not be changed on-the-fly, so we can treat any
bapass configuration as static. As such we can just register the
post-dividiers with a ratio that reflects the bypass status, which
allows us to bypass the PLL without breaking our abstraction model
and with it DT stability.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/clk-imx6q.c | 63 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 57 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index bd53c403bcc1..cd86a21a1f4d 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -225,6 +225,41 @@ static void of_assigned_ldb_sels(struct device_node *node,
 	}
 }
 
+static bool pll6_bypassed(struct device_node *node)
+{
+	int index, ret, num_clocks;
+	struct of_phandle_args clkspec;
+
+	num_clocks = of_count_phandle_with_args(node, "assigned-clocks",
+						"#clock-cells");
+	if (num_clocks < 0)
+		return false;
+
+	for (index = 0; index < num_clocks; index++) {
+		ret = of_parse_phandle_with_args(node, "assigned-clocks",
+						 "#clock-cells", index,
+						 &clkspec);
+		if (ret < 0)
+			return false;
+
+		if (clkspec.np == node &&
+		    clkspec.args[0] == IMX6QDL_PLL6_BYPASS)
+			break;
+	}
+
+	/* PLL6 bypass is not part of the assigned clock list */
+	if (index == num_clocks)
+		return false;
+
+	ret = of_parse_phandle_with_args(node, "assigned-clock-parents",
+					 "#clock-cells", index, &clkspec);
+
+	if (clkspec.args[0] != IMX6QDL_CLK_PLL6)
+		return true;
+
+	return false;
+}
+
 #define CCM_CCDR		0x04
 #define CCM_CCSR		0x0c
 #define CCM_CS2CDR		0x2c
@@ -503,16 +538,32 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
 	clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
 
-	clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
-	clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+	/*
+	 * The ENET PLL is special in that is has multiple outputs with
+	 * different post-dividers that are all affected by the single bypass
+	 * bit, so a single mux bit affects 3 independent branches of the clock
+	 * tree. There is no good way to model this in the clock framework and
+	 * dynamically changing the bypass bit, will yield unexpected results.
+	 * So we treat any configuration that bypasses the ENET PLL as
+	 * essentially static with the divider ratios reflecting the bypass
+	 * status.
+	 *
+	 */
+	if (!pll6_bypassed(ccm_node)) {
+		clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
+		clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
+		clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+						base + 0xe0, 0, 2, 0, clk_enet_ref_table,
+						&imx_ccm_lock);
+	} else {
+		clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 1);
+		clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 1);
+		clk[IMX6QDL_CLK_ENET_REF] = imx_clk_fixed_factor("enet_ref", "pll6_enet", 1, 1);
+	}
 
 	clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20);
 	clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19);
 
-	clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
-			base + 0xe0, 0, 2, 0, clk_enet_ref_table,
-			&imx_ccm_lock);
-
 	clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
 	clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
 
-- 
cgit v1.2.3-59-g8ed1b


From 3a48d918a4615f0287ac2e106981b3987bf75a3d Mon Sep 17 00:00:00 2001
From: Aisheng Dong <aisheng.dong@nxp.com>
Date: Thu, 13 Dec 2018 15:42:50 +0000
Subject: clk: imx: add configuration option for mmio clks

The patch introduces CONFIG_MXC_CLK option for legacy MMIO clocks,
this is required to compile legacy MMIO clock conditionally when adding
SCU based clocks for MX8 platforms later.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/Kconfig      | 1 +
 drivers/clk/Makefile     | 2 +-
 drivers/clk/imx/Kconfig  | 5 +++++
 drivers/clk/imx/Makefile | 2 +-
 4 files changed, 8 insertions(+), 2 deletions(-)
 create mode 100644 drivers/clk/imx/Kconfig

(limited to 'drivers/clk')

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 81cdb4eaca07..1dbfcc248b92 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -287,6 +287,7 @@ source "drivers/clk/actions/Kconfig"
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
 source "drivers/clk/imgtec/Kconfig"
+source "drivers/clk/imx/Kconfig"
 source "drivers/clk/ingenic/Kconfig"
 source "drivers/clk/keystone/Kconfig"
 source "drivers/clk/mediatek/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 72be7a38cff1..2aded27477d2 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -71,7 +71,7 @@ obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
 obj-$(CONFIG_H8300)			+= h8300/
 obj-$(CONFIG_ARCH_HISI)			+= hisilicon/
 obj-y					+= imgtec/
-obj-$(CONFIG_ARCH_MXC)			+= imx/
+obj-y					+= imx/
 obj-y					+= ingenic/
 obj-$(CONFIG_ARCH_K3)			+= keystone/
 obj-$(CONFIG_ARCH_KEYSTONE)		+= keystone/
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
new file mode 100644
index 000000000000..bdd85b89687b
--- /dev/null
+++ b/drivers/clk/imx/Kconfig
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+# common clock support for NXP i.MX SoC family.
+config MXC_CLK
+	bool
+	def_bool ARCH_MXC
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 8c3baa7e6496..d447f8c0500b 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-y += \
+obj-$(CONFIG_MXC_CLK) += \
 	clk.o \
 	clk-busy.o \
 	clk-cpu.o \
-- 
cgit v1.2.3-59-g8ed1b


From fe37b482041709753365bfca739cba24ada297ef Mon Sep 17 00:00:00 2001
From: Aisheng Dong <aisheng.dong@nxp.com>
Date: Thu, 13 Dec 2018 15:42:54 +0000
Subject: clk: imx: add scu clock common part

Add SCU clock common part which will be used by client clock drivers.
SCU clocks are totally different from the legacy clocks (No much
legacy things can be reused), it's using a firmware interface now based
on SCU protocol. So a new configuration option CONFIG_MXC_CLK_SCU is added.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[sboyd@kernel.org: Mark ccm_ipc_handle static]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Kconfig   |   4 +
 drivers/clk/imx/Makefile  |   3 +
 drivers/clk/imx/clk-scu.c | 270 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-scu.h |  15 +++
 4 files changed, 292 insertions(+)
 create mode 100644 drivers/clk/imx/clk-scu.c
 create mode 100644 drivers/clk/imx/clk-scu.h

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index bdd85b89687b..2a3b58d7bddf 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -3,3 +3,7 @@
 config MXC_CLK
 	bool
 	def_bool ARCH_MXC
+
+config MXC_CLK_SCU
+	bool
+	depends on IMX_SCU
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index d447f8c0500b..eec6d72ea5fb 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -13,6 +13,9 @@ obj-$(CONFIG_MXC_CLK) += \
 	clk-pllv3.o \
 	clk-pfd.o
 
+obj-$(CONFIG_MXC_CLK_SCU) += \
+	clk-scu.o
+
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
 obj-$(CONFIG_SOC_IMX25)  += clk-imx25.o
diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
new file mode 100644
index 000000000000..7ccf7edfe11c
--- /dev/null
+++ b/drivers/clk/imx/clk-scu.c
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include "clk-scu.h"
+
+static struct imx_sc_ipc *ccm_ipc_handle;
+
+/*
+ * struct clk_scu - Description of one SCU clock
+ * @hw: the common clk_hw
+ * @rsrc_id: resource ID of this SCU clock
+ * @clk_type: type of this clock resource
+ */
+struct clk_scu {
+	struct clk_hw hw;
+	u16 rsrc_id;
+	u8 clk_type;
+};
+
+/*
+ * struct imx_sc_msg_req_set_clock_rate - clock set rate protocol
+ * @hdr: SCU protocol header
+ * @rate: rate to set
+ * @resource: clock resource to set rate
+ * @clk: clk type of this resource
+ *
+ * This structure describes the SCU protocol of clock rate set
+ */
+struct imx_sc_msg_req_set_clock_rate {
+	struct imx_sc_rpc_msg hdr;
+	__le32 rate;
+	__le16 resource;
+	u8 clk;
+} __packed;
+
+struct req_get_clock_rate {
+	__le16 resource;
+	u8 clk;
+} __packed;
+
+struct resp_get_clock_rate {
+	__le32 rate;
+};
+
+/*
+ * struct imx_sc_msg_get_clock_rate - clock get rate protocol
+ * @hdr: SCU protocol header
+ * @req: get rate request protocol
+ * @resp: get rate response protocol
+ *
+ * This structure describes the SCU protocol of clock rate get
+ */
+struct imx_sc_msg_get_clock_rate {
+	struct imx_sc_rpc_msg hdr;
+	union {
+		struct req_get_clock_rate req;
+		struct resp_get_clock_rate resp;
+	} data;
+};
+
+/*
+ * struct imx_sc_msg_req_clock_enable - clock gate protocol
+ * @hdr: SCU protocol header
+ * @resource: clock resource to gate
+ * @clk: clk type of this resource
+ * @enable: whether gate off the clock
+ * @autog: HW auto gate enable
+ *
+ * This structure describes the SCU protocol of clock gate
+ */
+struct imx_sc_msg_req_clock_enable {
+	struct imx_sc_rpc_msg hdr;
+	__le16 resource;
+	u8 clk;
+	u8 enable;
+	u8 autog;
+} __packed;
+
+static inline struct clk_scu *to_clk_scu(struct clk_hw *hw)
+{
+	return container_of(hw, struct clk_scu, hw);
+}
+
+int imx_clk_scu_init(void)
+{
+	return imx_scu_get_handle(&ccm_ipc_handle);
+}
+
+/*
+ * clk_scu_recalc_rate - Get clock rate for a SCU clock
+ * @hw: clock to get rate for
+ * @parent_rate: parent rate provided by common clock framework, not used
+ *
+ * Gets the current clock rate of a SCU clock. Returns the current
+ * clock rate, or zero in failure.
+ */
+static unsigned long clk_scu_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_scu *clk = to_clk_scu(hw);
+	struct imx_sc_msg_get_clock_rate msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	int ret;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_PM;
+	hdr->func = IMX_SC_PM_FUNC_GET_CLOCK_RATE;
+	hdr->size = 2;
+
+	msg.data.req.resource = cpu_to_le16(clk->rsrc_id);
+	msg.data.req.clk = clk->clk_type;
+
+	ret = imx_scu_call_rpc(ccm_ipc_handle, &msg, true);
+	if (ret) {
+		pr_err("%s: failed to get clock rate %d\n",
+		       clk_hw_get_name(hw), ret);
+		return 0;
+	}
+
+	return le32_to_cpu(msg.data.resp.rate);
+}
+
+/*
+ * clk_scu_round_rate - Round clock rate for a SCU clock
+ * @hw: clock to round rate for
+ * @rate: rate to round
+ * @parent_rate: parent rate provided by common clock framework, not used
+ *
+ * Returns the current clock rate, or zero in failure.
+ */
+static long clk_scu_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	/*
+	 * Assume we support all the requested rate and let the SCU firmware
+	 * to handle the left work
+	 */
+	return rate;
+}
+
+/*
+ * clk_scu_set_rate - Set rate for a SCU clock
+ * @hw: clock to change rate for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the clock parent, not used for SCU clocks
+ *
+ * Sets a clock frequency for a SCU clock. Returns the SCU
+ * protocol status.
+ */
+static int clk_scu_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_scu *clk = to_clk_scu(hw);
+	struct imx_sc_msg_req_set_clock_rate msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_PM;
+	hdr->func = IMX_SC_PM_FUNC_SET_CLOCK_RATE;
+	hdr->size = 3;
+
+	msg.rate = cpu_to_le32(rate);
+	msg.resource = cpu_to_le16(clk->rsrc_id);
+	msg.clk = clk->clk_type;
+
+	return imx_scu_call_rpc(ccm_ipc_handle, &msg, true);
+}
+
+static int sc_pm_clock_enable(struct imx_sc_ipc *ipc, u16 resource,
+			      u8 clk, bool enable, bool autog)
+{
+	struct imx_sc_msg_req_clock_enable msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_PM;
+	hdr->func = IMX_SC_PM_FUNC_CLOCK_ENABLE;
+	hdr->size = 3;
+
+	msg.resource = cpu_to_le16(resource);
+	msg.clk = clk;
+	msg.enable = enable;
+	msg.autog = autog;
+
+	return imx_scu_call_rpc(ccm_ipc_handle, &msg, true);
+}
+
+/*
+ * clk_scu_prepare - Enable a SCU clock
+ * @hw: clock to enable
+ *
+ * Enable the clock at the DSC slice level
+ */
+static int clk_scu_prepare(struct clk_hw *hw)
+{
+	struct clk_scu *clk = to_clk_scu(hw);
+
+	return sc_pm_clock_enable(ccm_ipc_handle, clk->rsrc_id,
+				  clk->clk_type, true, false);
+}
+
+/*
+ * clk_scu_unprepare - Disable a SCU clock
+ * @hw: clock to enable
+ *
+ * Disable the clock at the DSC slice level
+ */
+static void clk_scu_unprepare(struct clk_hw *hw)
+{
+	struct clk_scu *clk = to_clk_scu(hw);
+	int ret;
+
+	ret = sc_pm_clock_enable(ccm_ipc_handle, clk->rsrc_id,
+				 clk->clk_type, false, false);
+	if (ret)
+		pr_warn("%s: clk unprepare failed %d\n", clk_hw_get_name(hw),
+			ret);
+}
+
+static const struct clk_ops clk_scu_ops = {
+	.recalc_rate = clk_scu_recalc_rate,
+	.round_rate = clk_scu_round_rate,
+	.set_rate = clk_scu_set_rate,
+	.prepare = clk_scu_prepare,
+	.unprepare = clk_scu_unprepare,
+};
+
+struct clk_hw *imx_clk_scu(const char *name, u32 rsrc_id, u8 clk_type)
+{
+	struct clk_init_data init;
+	struct clk_scu *clk;
+	struct clk_hw *hw;
+	int ret;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
+
+	clk->rsrc_id = rsrc_id;
+	clk->clk_type = clk_type;
+
+	init.name = name;
+	init.ops = &clk_scu_ops;
+	init.num_parents = 0;
+	/*
+	 * Note on MX8, the clocks are tightly coupled with power domain
+	 * that once the power domain is off, the clock status may be
+	 * lost. So we make it NOCACHE to let user to retrieve the real
+	 * clock status from HW instead of using the possible invalid
+	 * cached rate.
+	 */
+	init.flags = CLK_GET_RATE_NOCACHE;
+	clk->hw.init = &init;
+
+	hw = &clk->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(clk);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
diff --git a/drivers/clk/imx/clk-scu.h b/drivers/clk/imx/clk-scu.h
new file mode 100644
index 000000000000..309b4de20b25
--- /dev/null
+++ b/drivers/clk/imx/clk-scu.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#ifndef __IMX_CLK_SCU_H
+#define __IMX_CLK_SCU_H
+
+#include <linux/firmware/imx/sci.h>
+
+int imx_clk_scu_init(void);
+struct clk_hw *imx_clk_scu(const char *name, u32 rsrc_id, u8 clk_type);
+
+#endif
-- 
cgit v1.2.3-59-g8ed1b


From d360b130e210f2468b2ff9cae5177c6cba780e83 Mon Sep 17 00:00:00 2001
From: Abel Vesa <abel.vesa@nxp.com>
Date: Fri, 14 Dec 2018 14:20:34 +0000
Subject: clk: imx: Make the i.MX8MQ CCM clock driver CLK_IMX8MQ dependant

Remove the dependency between the i.MX8MQ CCM clock driver
and the CONFIG_SOC_IMX8MQ and use CONFIG_CLK_IMX8MQ instead.
CONFIG_CLK_IMX8MQ depends on ARCH_MXC && ARM64.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/Kconfig      | 1 +
 drivers/clk/imx/Kconfig  | 5 +++++
 drivers/clk/imx/Makefile | 2 ++
 3 files changed, 8 insertions(+)
 create mode 100644 drivers/clk/imx/Kconfig

(limited to 'drivers/clk')

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 81cdb4eaca07..5c1e0c760f0a 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -286,6 +286,7 @@ config COMMON_CLK_STM32H7
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/imx/Kconfig"
 source "drivers/clk/imgtec/Kconfig"
 source "drivers/clk/ingenic/Kconfig"
 source "drivers/clk/keystone/Kconfig"
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
new file mode 100644
index 000000000000..98ede6a2fa04
--- /dev/null
+++ b/drivers/clk/imx/Kconfig
@@ -0,0 +1,5 @@
+config CLK_IMX8MQ
+	bool "IMX8MQ CCM Clock Driver"
+	depends on ARCH_MXC && ARM64
+	help
+	    Build the driver for i.MX8MQ CCM Clock Driver
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 6952f055d0e3..c4a137889fd3 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -16,6 +16,8 @@ obj-y += \
 	clk-pfd.o \
 	clk-sccg-pll.o
 
+obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o
+
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
 obj-$(CONFIG_SOC_IMX25)  += clk-imx25.o
-- 
cgit v1.2.3-59-g8ed1b


From c2cccb6d0b33bad71154ec0c208d060456bcf6d4 Mon Sep 17 00:00:00 2001
From: Aisheng Dong <aisheng.dong@nxp.com>
Date: Thu, 13 Dec 2018 15:42:58 +0000
Subject: clk: imx: add imx8qxp clk driver

Add imx8qxp clk driver which is based on SCU firmware clock service.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
[sboyd@kernel.org: Move the makefile rule higher in the file]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Kconfig       |   7 ++
 drivers/clk/imx/Makefile      |   2 +
 drivers/clk/imx/clk-imx8qxp.c | 153 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 162 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx8qxp.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index 2a3b58d7bddf..a509a8fe7616 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -7,3 +7,10 @@ config MXC_CLK
 config MXC_CLK_SCU
 	bool
 	depends on IMX_SCU
+
+config CLK_IMX8QXP
+	bool "IMX8QXP SCU Clock"
+	depends on ARCH_MXC && IMX_SCU && ARM64
+	select MXC_CLK_SCU
+	help
+	  Build the driver for IMX8QXP SCU based clocks.
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index eec6d72ea5fb..a8a4518b065b 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_MXC_CLK) += \
 obj-$(CONFIG_MXC_CLK_SCU) += \
 	clk-scu.o
 
+obj-$(CONFIG_CLK_IMX8QXP) += clk-imx8qxp.o
+
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
 obj-$(CONFIG_SOC_IMX25)  += clk-imx25.o
diff --git a/drivers/clk/imx/clk-imx8qxp.c b/drivers/clk/imx/clk-imx8qxp.c
new file mode 100644
index 000000000000..33c9396b08f1
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8qxp.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-scu.h"
+
+#include <dt-bindings/clock/imx8qxp-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+static int imx8qxp_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *ccm_node = pdev->dev.of_node;
+	struct clk_hw_onecell_data *clk_data;
+	struct clk_hw **clks;
+	int ret, i;
+
+	ret = imx_clk_scu_init();
+	if (ret)
+		return ret;
+
+	clk_data = devm_kzalloc(&pdev->dev, struct_size(clk_data, hws,
+				IMX8QXP_SCU_CLK_END), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = IMX8QXP_SCU_CLK_END;
+	clks = clk_data->hws;
+
+	/* Fixed clocks */
+	clks[IMX8QXP_CLK_DUMMY]			= clk_hw_register_fixed_rate(NULL, "dummy", NULL, 0, 0);
+	clks[IMX8QXP_ADMA_IPG_CLK_ROOT] 	= clk_hw_register_fixed_rate(NULL, "dma_ipg_clk_root", NULL, 0, 120000000);
+	clks[IMX8QXP_CONN_AXI_CLK_ROOT]		= clk_hw_register_fixed_rate(NULL, "conn_axi_clk_root", NULL, 0, 333333333);
+	clks[IMX8QXP_CONN_AHB_CLK_ROOT]		= clk_hw_register_fixed_rate(NULL, "conn_ahb_clk_root", NULL, 0, 166666666);
+	clks[IMX8QXP_CONN_IPG_CLK_ROOT]		= clk_hw_register_fixed_rate(NULL, "conn_ipg_clk_root", NULL, 0, 83333333);
+	clks[IMX8QXP_DC_AXI_EXT_CLK]		= clk_hw_register_fixed_rate(NULL, "dc_axi_ext_clk_root", NULL, 0, 800000000);
+	clks[IMX8QXP_DC_AXI_INT_CLK]		= clk_hw_register_fixed_rate(NULL, "dc_axi_int_clk_root", NULL, 0, 400000000);
+	clks[IMX8QXP_DC_CFG_CLK]		= clk_hw_register_fixed_rate(NULL, "dc_cfg_clk_root", NULL, 0, 100000000);
+	clks[IMX8QXP_MIPI_IPG_CLK]		= clk_hw_register_fixed_rate(NULL, "mipi_ipg_clk_root", NULL, 0, 120000000);
+	clks[IMX8QXP_IMG_AXI_CLK]		= clk_hw_register_fixed_rate(NULL, "img_axi_clk_root", NULL, 0, 400000000);
+	clks[IMX8QXP_IMG_IPG_CLK]		= clk_hw_register_fixed_rate(NULL, "img_ipg_clk_root", NULL, 0, 200000000);
+	clks[IMX8QXP_IMG_PXL_CLK]		= clk_hw_register_fixed_rate(NULL, "img_pxl_clk_root", NULL, 0, 600000000);
+	clks[IMX8QXP_HSIO_AXI_CLK]		= clk_hw_register_fixed_rate(NULL, "hsio_axi_clk_root", NULL, 0, 400000000);
+	clks[IMX8QXP_HSIO_PER_CLK]		= clk_hw_register_fixed_rate(NULL, "hsio_per_clk_root", NULL, 0, 133333333);
+	clks[IMX8QXP_LSIO_MEM_CLK]		= clk_hw_register_fixed_rate(NULL, "lsio_mem_clk_root", NULL, 0, 200000000);
+	clks[IMX8QXP_LSIO_BUS_CLK]		= clk_hw_register_fixed_rate(NULL, "lsio_bus_clk_root", NULL, 0, 100000000);
+
+	/* ARM core */
+	clks[IMX8QXP_A35_CLK]			= imx_clk_scu("a35_clk", IMX_SC_R_A35, IMX_SC_PM_CLK_CPU);
+
+	/* LSIO SS */
+	clks[IMX8QXP_LSIO_PWM0_CLK]		= imx_clk_scu("pwm0_clk", IMX_SC_R_PWM_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_PWM1_CLK]		= imx_clk_scu("pwm1_clk", IMX_SC_R_PWM_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_PWM2_CLK]		= imx_clk_scu("pwm2_clk", IMX_SC_R_PWM_2, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_PWM3_CLK]		= imx_clk_scu("pwm3_clk", IMX_SC_R_PWM_3, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_PWM4_CLK]		= imx_clk_scu("pwm4_clk", IMX_SC_R_PWM_4, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_PWM5_CLK]		= imx_clk_scu("pwm5_clk", IMX_SC_R_PWM_5, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_PWM6_CLK]		= imx_clk_scu("pwm6_clk", IMX_SC_R_PWM_6, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_PWM7_CLK]		= imx_clk_scu("pwm7_clk", IMX_SC_R_PWM_7, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_GPT0_CLK]		= imx_clk_scu("gpt0_clk", IMX_SC_R_GPT_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_GPT1_CLK]		= imx_clk_scu("gpt1_clk", IMX_SC_R_GPT_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_GPT2_CLK]		= imx_clk_scu("gpt2_clk", IMX_SC_R_GPT_2, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_GPT3_CLK]		= imx_clk_scu("gpt3_clk", IMX_SC_R_GPT_3, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_GPT4_CLK]		= imx_clk_scu("gpt4_clk", IMX_SC_R_GPT_4, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_FSPI0_CLK]		= imx_clk_scu("fspi0_clk", IMX_SC_R_FSPI_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_LSIO_FSPI1_CLK]		= imx_clk_scu("fspi1_clk", IMX_SC_R_FSPI_1, IMX_SC_PM_CLK_PER);
+
+	/* ADMA SS */
+	clks[IMX8QXP_ADMA_UART0_CLK]		= imx_clk_scu("uart0_clk", IMX_SC_R_UART_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_UART1_CLK]		= imx_clk_scu("uart1_clk", IMX_SC_R_UART_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_UART2_CLK]		= imx_clk_scu("uart2_clk", IMX_SC_R_UART_2, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_UART3_CLK]		= imx_clk_scu("uart3_clk", IMX_SC_R_UART_3, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_SPI0_CLK]		= imx_clk_scu("spi0_clk",  IMX_SC_R_SPI_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_SPI1_CLK]		= imx_clk_scu("spi1_clk",  IMX_SC_R_SPI_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_SPI2_CLK]		= imx_clk_scu("spi2_clk",  IMX_SC_R_SPI_2, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_SPI3_CLK]		= imx_clk_scu("spi3_clk",  IMX_SC_R_SPI_3, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_CAN0_CLK]		= imx_clk_scu("can0_clk",  IMX_SC_R_CAN_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_I2C0_CLK]		= imx_clk_scu("i2c0_clk",  IMX_SC_R_I2C_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_I2C1_CLK]		= imx_clk_scu("i2c1_clk",  IMX_SC_R_I2C_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_I2C2_CLK]		= imx_clk_scu("i2c2_clk",  IMX_SC_R_I2C_2, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_I2C3_CLK]		= imx_clk_scu("i2c3_clk",  IMX_SC_R_I2C_3, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_FTM0_CLK]		= imx_clk_scu("ftm0_clk",  IMX_SC_R_FTM_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_FTM1_CLK]		= imx_clk_scu("ftm1_clk",  IMX_SC_R_FTM_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_ADC0_CLK]		= imx_clk_scu("adc0_clk",  IMX_SC_R_ADC_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_PWM_CLK]		= imx_clk_scu("pwm_clk",   IMX_SC_R_LCD_0_PWM_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_ADMA_LCD_CLK]		= imx_clk_scu("lcd_clk",   IMX_SC_R_LCD_0, IMX_SC_PM_CLK_PER);
+
+	/* Connectivity */
+	clks[IMX8QXP_CONN_SDHC0_CLK]		= imx_clk_scu("sdhc0_clk", IMX_SC_R_SDHC_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CONN_SDHC1_CLK]		= imx_clk_scu("sdhc1_clk", IMX_SC_R_SDHC_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CONN_SDHC2_CLK]		= imx_clk_scu("sdhc2_clk", IMX_SC_R_SDHC_2, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CONN_ENET0_ROOT_CLK]	= imx_clk_scu("enet0_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CONN_ENET0_BYPASS_CLK]	= imx_clk_scu("enet0_bypass_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_BYPASS);
+	clks[IMX8QXP_CONN_ENET0_RGMII_CLK]	= imx_clk_scu("enet0_rgmii_clk", IMX_SC_R_ENET_0, IMX_SC_PM_CLK_MISC0);
+	clks[IMX8QXP_CONN_ENET1_ROOT_CLK]	= imx_clk_scu("enet1_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CONN_ENET1_BYPASS_CLK]	= imx_clk_scu("enet1_bypass_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_BYPASS);
+	clks[IMX8QXP_CONN_ENET1_RGMII_CLK]	= imx_clk_scu("enet1_rgmii_clk", IMX_SC_R_ENET_1, IMX_SC_PM_CLK_MISC0);
+	clks[IMX8QXP_CONN_GPMI_BCH_IO_CLK]	= imx_clk_scu("gpmi_io_clk", IMX_SC_R_NAND, IMX_SC_PM_CLK_MST_BUS);
+	clks[IMX8QXP_CONN_GPMI_BCH_CLK]		= imx_clk_scu("gpmi_bch_clk", IMX_SC_R_NAND, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CONN_USB2_ACLK]		= imx_clk_scu("usb3_aclk_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CONN_USB2_BUS_CLK]		= imx_clk_scu("usb3_bus_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_MST_BUS);
+	clks[IMX8QXP_CONN_USB2_LPM_CLK]		= imx_clk_scu("usb3_lpm_div", IMX_SC_R_USB_2, IMX_SC_PM_CLK_MISC);
+
+	/* Display controller SS */
+	clks[IMX8QXP_DC0_DISP0_CLK]		= imx_clk_scu("dc0_disp0_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC0);
+	clks[IMX8QXP_DC0_DISP1_CLK]		= imx_clk_scu("dc0_disp1_clk", IMX_SC_R_DC_0, IMX_SC_PM_CLK_MISC1);
+
+	/* MIPI-LVDS SS */
+	clks[IMX8QXP_MIPI0_I2C0_CLK]		= imx_clk_scu("mipi0_i2c0_clk", IMX_SC_R_MIPI_0_I2C_0, IMX_SC_PM_CLK_MISC2);
+	clks[IMX8QXP_MIPI0_I2C1_CLK]		= imx_clk_scu("mipi0_i2c1_clk", IMX_SC_R_MIPI_0_I2C_1, IMX_SC_PM_CLK_MISC2);
+
+	/* MIPI CSI SS */
+	clks[IMX8QXP_CSI0_CORE_CLK]		= imx_clk_scu("mipi_csi0_core_clk", IMX_SC_R_CSI_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CSI0_ESC_CLK]		= imx_clk_scu("mipi_csi0_esc_clk",  IMX_SC_R_CSI_0, IMX_SC_PM_CLK_MISC);
+	clks[IMX8QXP_CSI0_I2C0_CLK]		= imx_clk_scu("mipi_csi0_i2c0_clk", IMX_SC_R_CSI_0_I2C_0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_CSI0_PWM0_CLK]		= imx_clk_scu("mipi_csi0_pwm0_clk", IMX_SC_R_CSI_0_PWM_0, IMX_SC_PM_CLK_PER);
+
+	/* GPU SS */
+	clks[IMX8QXP_GPU0_CORE_CLK]		= imx_clk_scu("gpu_core0_clk",	 IMX_SC_R_GPU_0_PID0, IMX_SC_PM_CLK_PER);
+	clks[IMX8QXP_GPU0_SHADER_CLK]		= imx_clk_scu("gpu_shader0_clk", IMX_SC_R_GPU_0_PID0, IMX_SC_PM_CLK_MISC);
+
+	for (i = 0; i < clk_data->num; i++) {
+		if (IS_ERR(clks[i]))
+			pr_warn("i.MX clk %u: register failed with %ld\n",
+				i, PTR_ERR(clks[i]));
+	}
+
+	return of_clk_add_hw_provider(ccm_node, of_clk_hw_onecell_get, clk_data);
+}
+
+static const struct of_device_id imx8qxp_match[] = {
+	{ .compatible = "fsl,imx8qxp-clk", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver imx8qxp_clk_driver = {
+	.driver = {
+		.name = "imx8qxp-clk",
+		.of_match_table = imx8qxp_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = imx8qxp_clk_probe,
+};
+builtin_platform_driver(imx8qxp_clk_driver);
-- 
cgit v1.2.3-59-g8ed1b


From 2f77296d3df9915490f41fc8a971cba00e0b4a2c Mon Sep 17 00:00:00 2001
From: Aisheng Dong <aisheng.dong@nxp.com>
Date: Thu, 13 Dec 2018 15:43:01 +0000
Subject: clk: imx: add lpcg clock support

The Low-Power Clock Gate (LPCG) modules contain a local programming
model to control the clock gates for the peripherals. An LPCG module
is used to locally gate the clocks for the associated peripheral.
And they're bedind the SCU clock.

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile       |   3 +-
 drivers/clk/imx/clk-lpcg-scu.c | 116 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-scu.h      |   3 ++
 3 files changed, 121 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-lpcg-scu.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index a8a4518b065b..8577f780ad31 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -14,7 +14,8 @@ obj-$(CONFIG_MXC_CLK) += \
 	clk-pfd.o
 
 obj-$(CONFIG_MXC_CLK_SCU) += \
-	clk-scu.o
+	clk-scu.o \
+	clk-lpcg-scu.o
 
 obj-$(CONFIG_CLK_IMX8QXP) += clk-imx8qxp.o
 
diff --git a/drivers/clk/imx/clk-lpcg-scu.c b/drivers/clk/imx/clk-lpcg-scu.c
new file mode 100644
index 000000000000..a73a799fb777
--- /dev/null
+++ b/drivers/clk/imx/clk-lpcg-scu.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "clk-scu.h"
+
+static DEFINE_SPINLOCK(imx_lpcg_scu_lock);
+
+#define CLK_GATE_SCU_LPCG_MASK		0x3
+#define CLK_GATE_SCU_LPCG_HW_SEL	BIT(0)
+#define CLK_GATE_SCU_LPCG_SW_SEL	BIT(1)
+
+/*
+ * struct clk_lpcg_scu - Description of LPCG clock
+ *
+ * @hw: clk_hw of this LPCG
+ * @reg: register of this LPCG clock
+ * @bit_idx: bit index of this LPCG clock
+ * @hw_gate: HW auto gate enable
+ *
+ * This structure describes one LPCG clock
+ */
+struct clk_lpcg_scu {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 bit_idx;
+	bool hw_gate;
+};
+
+#define to_clk_lpcg_scu(_hw) container_of(_hw, struct clk_lpcg_scu, hw)
+
+static int clk_lpcg_scu_enable(struct clk_hw *hw)
+{
+	struct clk_lpcg_scu *clk = to_clk_lpcg_scu(hw);
+	unsigned long flags;
+	u32 reg, val;
+
+	spin_lock_irqsave(&imx_lpcg_scu_lock, flags);
+
+	reg = readl_relaxed(clk->reg);
+	reg &= ~(CLK_GATE_SCU_LPCG_MASK << clk->bit_idx);
+
+	val = CLK_GATE_SCU_LPCG_SW_SEL;
+	if (clk->hw_gate)
+		val |= CLK_GATE_SCU_LPCG_HW_SEL;
+
+	reg |= val << clk->bit_idx;
+	writel(reg, clk->reg);
+
+	spin_unlock_irqrestore(&imx_lpcg_scu_lock, flags);
+
+	return 0;
+}
+
+static void clk_lpcg_scu_disable(struct clk_hw *hw)
+{
+	struct clk_lpcg_scu *clk = to_clk_lpcg_scu(hw);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&imx_lpcg_scu_lock, flags);
+
+	reg = readl_relaxed(clk->reg);
+	reg &= ~(CLK_GATE_SCU_LPCG_MASK << clk->bit_idx);
+	writel(reg, clk->reg);
+
+	spin_unlock_irqrestore(&imx_lpcg_scu_lock, flags);
+}
+
+static const struct clk_ops clk_lpcg_scu_ops = {
+	.enable = clk_lpcg_scu_enable,
+	.disable = clk_lpcg_scu_disable,
+};
+
+struct clk_hw *imx_clk_lpcg_scu(const char *name, const char *parent_name,
+				unsigned long flags, void __iomem *reg,
+				u8 bit_idx, bool hw_gate)
+{
+	struct clk_lpcg_scu *clk;
+	struct clk_init_data init;
+	struct clk_hw *hw;
+	int ret;
+
+	clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
+
+	clk->reg = reg;
+	clk->bit_idx = bit_idx;
+	clk->hw_gate = hw_gate;
+
+	init.name = name;
+	init.ops = &clk_lpcg_scu_ops;
+	init.flags = CLK_SET_RATE_PARENT | flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	clk->hw.init = &init;
+
+	hw = &clk->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(clk);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
diff --git a/drivers/clk/imx/clk-scu.h b/drivers/clk/imx/clk-scu.h
index 309b4de20b25..52c1746ec988 100644
--- a/drivers/clk/imx/clk-scu.h
+++ b/drivers/clk/imx/clk-scu.h
@@ -12,4 +12,7 @@
 int imx_clk_scu_init(void);
 struct clk_hw *imx_clk_scu(const char *name, u32 rsrc_id, u8 clk_type);
 
+struct clk_hw *imx_clk_lpcg_scu(const char *name, const char *parent_name,
+				unsigned long flags, void __iomem *reg,
+				u8 bit_idx, bool hw_gate);
 #endif
-- 
cgit v1.2.3-59-g8ed1b


From 1e3121bfe51a3424050ae66326e8a113f0ed7fb8 Mon Sep 17 00:00:00 2001
From: Aisheng Dong <aisheng.dong@nxp.com>
Date: Thu, 13 Dec 2018 15:43:05 +0000
Subject: clk: imx: add imx8qxp lpcg driver

Add imx8qxp lpcg driver support

Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/imx/Makefile           |   2 +-
 drivers/clk/imx/clk-imx8qxp-lpcg.c | 216 +++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk-imx8qxp-lpcg.h | 102 ++++++++++++++++++
 3 files changed, 319 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-imx8qxp-lpcg.c
 create mode 100644 drivers/clk/imx/clk-imx8qxp-lpcg.h

(limited to 'drivers/clk')

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 8577f780ad31..953a92a4b04b 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_MXC_CLK_SCU) += \
 	clk-scu.o \
 	clk-lpcg-scu.o
 
-obj-$(CONFIG_CLK_IMX8QXP) += clk-imx8qxp.o
+obj-$(CONFIG_CLK_IMX8QXP) += clk-imx8qxp.o clk-imx8qxp-lpcg.o
 
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
diff --git a/drivers/clk/imx/clk-imx8qxp-lpcg.c b/drivers/clk/imx/clk-imx8qxp-lpcg.c
new file mode 100644
index 000000000000..dcae1dd85e43
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8qxp-lpcg.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "clk-scu.h"
+#include "clk-imx8qxp-lpcg.h"
+
+#include <dt-bindings/clock/imx8qxp-clock.h>
+
+/*
+ * struct imx8qxp_lpcg_data - Description of one LPCG clock
+ * @id: clock ID
+ * @name: clock name
+ * @parent: parent clock name
+ * @flags: common clock flags
+ * @offset: offset of this LPCG clock
+ * @bit_idx: bit index of this LPCG clock
+ * @hw_gate: whether supports HW autogate
+ *
+ * This structure describes one LPCG clock
+ */
+struct imx8qxp_lpcg_data {
+	int id;
+	char *name;
+	char *parent;
+	unsigned long flags;
+	u32 offset;
+	u8 bit_idx;
+	bool hw_gate;
+};
+
+/*
+ * struct imx8qxp_ss_lpcg - Description of one subsystem LPCG clocks
+ * @lpcg: LPCG clocks array of one subsystem
+ * @num_lpcg: the number of LPCG clocks
+ * @num_max: the maximum number of LPCG clocks
+ *
+ * This structure describes each subsystem LPCG clocks information
+ * which then will be used to create respective LPCGs clocks
+ */
+struct imx8qxp_ss_lpcg {
+	const struct imx8qxp_lpcg_data *lpcg;
+	u8 num_lpcg;
+	u8 num_max;
+};
+
+static const struct imx8qxp_lpcg_data imx8qxp_lpcg_adma[] = {
+	{ IMX8QXP_ADMA_LPCG_UART0_IPG_CLK, "uart0_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPUART_0_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_UART0_BAUD_CLK, "uart0_lpcg_baud_clk", "uart0_clk", 0, ADMA_LPUART_0_LPCG, 0, 0, },
+	{ IMX8QXP_ADMA_LPCG_UART1_IPG_CLK, "uart1_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPUART_1_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_UART1_BAUD_CLK, "uart1_lpcg_baud_clk", "uart1_clk", 0, ADMA_LPUART_1_LPCG, 0, 0, },
+	{ IMX8QXP_ADMA_LPCG_UART2_IPG_CLK, "uart2_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPUART_2_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_UART2_BAUD_CLK, "uart2_lpcg_baud_clk", "uart2_clk", 0, ADMA_LPUART_2_LPCG, 0, 0, },
+	{ IMX8QXP_ADMA_LPCG_UART3_IPG_CLK, "uart3_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPUART_3_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_UART3_BAUD_CLK, "uart3_lpcg_baud_clk", "uart3_clk", 0, ADMA_LPUART_3_LPCG, 0, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C0_IPG_CLK, "i2c0_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPI2C_0_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C0_CLK, "i2c0_lpcg_clk", "i2c0_clk", 0, ADMA_LPI2C_0_LPCG, 0, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C1_IPG_CLK, "i2c1_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPI2C_1_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C1_CLK, "i2c1_lpcg_clk", "i2c1_clk", 0, ADMA_LPI2C_1_LPCG, 0, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C2_IPG_CLK, "i2c2_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPI2C_2_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C2_CLK, "i2c2_lpcg_clk", "i2c2_clk", 0, ADMA_LPI2C_2_LPCG, 0, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C3_IPG_CLK, "i2c3_lpcg_ipg_clk", "dma_ipg_clk_root", 0, ADMA_LPI2C_3_LPCG, 16, 0, },
+	{ IMX8QXP_ADMA_LPCG_I2C3_CLK, "i2c3_lpcg_clk", "i2c3_clk", 0, ADMA_LPI2C_3_LPCG, 0, 0, },
+};
+
+static const struct imx8qxp_ss_lpcg imx8qxp_ss_adma = {
+	.lpcg = imx8qxp_lpcg_adma,
+	.num_lpcg = ARRAY_SIZE(imx8qxp_lpcg_adma),
+	.num_max = IMX8QXP_ADMA_LPCG_CLK_END,
+};
+
+static const struct imx8qxp_lpcg_data imx8qxp_lpcg_conn[] = {
+	{ IMX8QXP_CONN_LPCG_SDHC0_PER_CLK, "sdhc0_lpcg_per_clk", "sdhc0_clk", 0, CONN_USDHC_0_LPCG, 0, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK, "sdhc0_lpcg_ipg_clk", "conn_ipg_clk_root", 0, CONN_USDHC_0_LPCG, 16, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC0_HCLK, "sdhc0_lpcg_ahb_clk", "conn_axi_clk_root", 0, CONN_USDHC_0_LPCG, 20, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC1_PER_CLK, "sdhc1_lpcg_per_clk", "sdhc1_clk", 0, CONN_USDHC_1_LPCG, 0, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC1_IPG_CLK, "sdhc1_lpcg_ipg_clk", "conn_ipg_clk_root", 0, CONN_USDHC_1_LPCG, 16, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC1_HCLK, "sdhc1_lpcg_ahb_clk", "conn_axi_clk_root", 0, CONN_USDHC_1_LPCG, 20, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC2_PER_CLK, "sdhc2_lpcg_per_clk", "sdhc2_clk", 0, CONN_USDHC_2_LPCG, 0, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC2_IPG_CLK, "sdhc2_lpcg_ipg_clk", "conn_ipg_clk_root", 0, CONN_USDHC_2_LPCG, 16, 0, },
+	{ IMX8QXP_CONN_LPCG_SDHC2_HCLK, "sdhc2_lpcg_ahb_clk", "conn_axi_clk_root", 0, CONN_USDHC_2_LPCG, 20, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET0_ROOT_CLK, "enet0_ipg_root_clk", "enet0_clk", 0, CONN_ENET_0_LPCG, 0, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET0_TX_CLK, "enet0_tx_clk", "enet0_clk", 0, CONN_ENET_0_LPCG, 4, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET0_AHB_CLK, "enet0_ahb_clk", "conn_axi_clk_root", 0, CONN_ENET_0_LPCG, 8, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET0_IPG_S_CLK, "enet0_ipg_s_clk", "conn_ipg_clk_root", 0, CONN_ENET_0_LPCG, 20, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET0_IPG_CLK, "enet0_ipg_clk", "enet0_ipg_s_clk", 0, CONN_ENET_0_LPCG, 16, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET1_ROOT_CLK, "enet1_ipg_root_clk", "enet1_clk", 0, CONN_ENET_1_LPCG, 0, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET1_TX_CLK, "enet1_tx_clk", "enet1_clk", 0, CONN_ENET_1_LPCG, 4, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET1_AHB_CLK, "enet1_ahb_clk", "conn_axi_clk_root", 0, CONN_ENET_1_LPCG, 8, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET1_IPG_S_CLK, "enet1_ipg_s_clk", "conn_ipg_clk_root", 0, CONN_ENET_1_LPCG, 20, 0, },
+	{ IMX8QXP_CONN_LPCG_ENET1_IPG_CLK, "enet1_ipg_clk", "enet0_ipg_s_clk", 0, CONN_ENET_1_LPCG, 16, 0, },
+};
+
+static const struct imx8qxp_ss_lpcg imx8qxp_ss_conn = {
+	.lpcg = imx8qxp_lpcg_conn,
+	.num_lpcg = ARRAY_SIZE(imx8qxp_lpcg_conn),
+	.num_max = IMX8QXP_CONN_LPCG_CLK_END,
+};
+
+static const struct imx8qxp_lpcg_data imx8qxp_lpcg_lsio[] = {
+	{ IMX8QXP_LSIO_LPCG_PWM0_IPG_CLK, "pwm0_lpcg_ipg_clk", "pwm0_clk", 0, LSIO_PWM_0_LPCG, 0, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM0_IPG_HF_CLK, "pwm0_lpcg_ipg_hf_clk", "pwm0_clk", 0, LSIO_PWM_0_LPCG, 4, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM0_IPG_S_CLK, "pwm0_lpcg_ipg_s_clk", "pwm0_clk", 0, LSIO_PWM_0_LPCG, 16, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM0_IPG_SLV_CLK, "pwm0_lpcg_ipg_slv_clk", "lsio_bus_clk_root", 0, LSIO_PWM_0_LPCG, 20, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM0_IPG_MSTR_CLK, "pwm0_lpcg_ipg_mstr_clk", "pwm0_clk", 0, LSIO_PWM_0_LPCG, 24, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM1_IPG_CLK, "pwm1_lpcg_ipg_clk", "pwm1_clk", 0, LSIO_PWM_1_LPCG, 0, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM1_IPG_HF_CLK, "pwm1_lpcg_ipg_hf_clk", "pwm1_clk", 0, LSIO_PWM_1_LPCG, 4, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM1_IPG_S_CLK, "pwm1_lpcg_ipg_s_clk", "pwm1_clk", 0, LSIO_PWM_1_LPCG, 16, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM1_IPG_SLV_CLK, "pwm1_lpcg_ipg_slv_clk", "lsio_bus_clk_root", 0, LSIO_PWM_1_LPCG, 20, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM1_IPG_MSTR_CLK, "pwm1_lpcg_ipg_mstr_clk", "pwm1_clk", 0, LSIO_PWM_1_LPCG, 24, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM2_IPG_CLK, "pwm2_lpcg_ipg_clk", "pwm2_clk", 0, LSIO_PWM_2_LPCG, 0, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM2_IPG_HF_CLK, "pwm2_lpcg_ipg_hf_clk", "pwm2_clk", 0, LSIO_PWM_2_LPCG, 4, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM2_IPG_S_CLK, "pwm2_lpcg_ipg_s_clk", "pwm2_clk", 0, LSIO_PWM_2_LPCG, 16, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM2_IPG_SLV_CLK, "pwm2_lpcg_ipg_slv_clk", "lsio_bus_clk_root", 0, LSIO_PWM_2_LPCG, 20, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM2_IPG_MSTR_CLK, "pwm2_lpcg_ipg_mstr_clk", "pwm2_clk", 0, LSIO_PWM_2_LPCG, 24, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM3_IPG_CLK, "pwm3_lpcg_ipg_clk", "pwm3_clk", 0, LSIO_PWM_3_LPCG, 0, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM3_IPG_HF_CLK, "pwm3_lpcg_ipg_hf_clk", "pwm3_clk", 0, LSIO_PWM_3_LPCG, 4, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM3_IPG_S_CLK, "pwm3_lpcg_ipg_s_clk", "pwm3_clk", 0, LSIO_PWM_3_LPCG, 16, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM3_IPG_SLV_CLK, "pwm3_lpcg_ipg_slv_clk", "lsio_bus_clk_root", 0, LSIO_PWM_3_LPCG, 20, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM3_IPG_MSTR_CLK, "pwm3_lpcg_ipg_mstr_clk", "pwm3_clk", 0, LSIO_PWM_3_LPCG, 24, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM4_IPG_CLK, "pwm4_lpcg_ipg_clk", "pwm4_clk", 0, LSIO_PWM_4_LPCG, 0, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM4_IPG_HF_CLK, "pwm4_lpcg_ipg_hf_clk", "pwm4_clk", 0, LSIO_PWM_4_LPCG, 4, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM4_IPG_S_CLK, "pwm4_lpcg_ipg_s_clk", "pwm4_clk", 0, LSIO_PWM_4_LPCG, 16, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM4_IPG_SLV_CLK, "pwm4_lpcg_ipg_slv_clk", "lsio_bus_clk_root", 0, LSIO_PWM_4_LPCG, 20, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM4_IPG_MSTR_CLK, "pwm4_lpcg_ipg_mstr_clk", "pwm4_clk", 0, LSIO_PWM_4_LPCG, 24, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM5_IPG_CLK, "pwm5_lpcg_ipg_clk", "pwm5_clk", 0, LSIO_PWM_5_LPCG, 0, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM5_IPG_HF_CLK, "pwm5_lpcg_ipg_hf_clk", "pwm5_clk", 0, LSIO_PWM_5_LPCG, 4, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM5_IPG_S_CLK, "pwm5_lpcg_ipg_s_clk", "pwm5_clk", 0, LSIO_PWM_5_LPCG, 16, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM5_IPG_SLV_CLK, "pwm5_lpcg_ipg_slv_clk", "lsio_bus_clk_root", 0, LSIO_PWM_5_LPCG, 20, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM5_IPG_MSTR_CLK, "pwm5_lpcg_ipg_mstr_clk", "pwm5_clk", 0, LSIO_PWM_5_LPCG, 24, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM6_IPG_CLK, "pwm6_lpcg_ipg_clk", "pwm6_clk", 0, LSIO_PWM_6_LPCG, 0, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM6_IPG_HF_CLK, "pwm6_lpcg_ipg_hf_clk", "pwm6_clk", 0, LSIO_PWM_6_LPCG, 4, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM6_IPG_S_CLK, "pwm6_lpcg_ipg_s_clk", "pwm6_clk", 0, LSIO_PWM_6_LPCG, 16, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM6_IPG_SLV_CLK, "pwm6_lpcg_ipg_slv_clk", "lsio_bus_clk_root", 0, LSIO_PWM_6_LPCG, 20, 0, },
+	{ IMX8QXP_LSIO_LPCG_PWM6_IPG_MSTR_CLK, "pwm6_lpcg_ipg_mstr_clk", "pwm6_clk", 0, LSIO_PWM_6_LPCG, 24, 0, },
+};
+
+static const struct imx8qxp_ss_lpcg imx8qxp_ss_lsio = {
+	.lpcg = imx8qxp_lpcg_lsio,
+	.num_lpcg = ARRAY_SIZE(imx8qxp_lpcg_lsio),
+	.num_max = IMX8QXP_LSIO_LPCG_CLK_END,
+};
+
+static int imx8qxp_lpcg_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct clk_hw_onecell_data *clk_data;
+	const struct imx8qxp_ss_lpcg *ss_lpcg;
+	const struct imx8qxp_lpcg_data *lpcg;
+	struct resource *res;
+	struct clk_hw **clks;
+	void __iomem *base;
+	int i;
+
+	ss_lpcg = of_device_get_match_data(dev);
+	if (!ss_lpcg)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!base)
+		return -ENOMEM;
+
+	clk_data = devm_kzalloc(&pdev->dev, struct_size(clk_data, hws,
+				ss_lpcg->num_max), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = ss_lpcg->num_max;
+	clks = clk_data->hws;
+
+	for (i = 0; i < ss_lpcg->num_lpcg; i++) {
+		lpcg = ss_lpcg->lpcg + i;
+		clks[lpcg->id] = imx_clk_lpcg_scu(lpcg->name, lpcg->parent,
+						  lpcg->flags, base + lpcg->offset,
+						  lpcg->bit_idx, lpcg->hw_gate);
+	}
+
+	for (i = 0; i < clk_data->num; i++) {
+		if (IS_ERR(clks[i]))
+			pr_warn("i.MX clk %u: register failed with %ld\n",
+				i, PTR_ERR(clks[i]));
+	}
+
+	return of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
+}
+
+static const struct of_device_id imx8qxp_lpcg_match[] = {
+	{ .compatible = "fsl,imx8qxp-lpcg-adma", &imx8qxp_ss_adma, },
+	{ .compatible = "fsl,imx8qxp-lpcg-conn", &imx8qxp_ss_conn, },
+	{ .compatible = "fsl,imx8qxp-lpcg-lsio", &imx8qxp_ss_lsio, },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver imx8qxp_lpcg_clk_driver = {
+	.driver = {
+		.name = "imx8qxp-lpcg-clk",
+		.of_match_table = imx8qxp_lpcg_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = imx8qxp_lpcg_clk_probe,
+};
+
+builtin_platform_driver(imx8qxp_lpcg_clk_driver);
diff --git a/drivers/clk/imx/clk-imx8qxp-lpcg.h b/drivers/clk/imx/clk-imx8qxp-lpcg.h
new file mode 100644
index 000000000000..2a37ce57c500
--- /dev/null
+++ b/drivers/clk/imx/clk-imx8qxp-lpcg.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ *   Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#ifndef _IMX8QXP_LPCG_H
+#define _IMX8QXP_LPCG_H
+
+/*LSIO SS */
+#define LSIO_PWM_0_LPCG			0x00000
+#define LSIO_PWM_1_LPCG			0x10000
+#define LSIO_PWM_2_LPCG			0x20000
+#define LSIO_PWM_3_LPCG			0x30000
+#define LSIO_PWM_4_LPCG			0x40000
+#define LSIO_PWM_5_LPCG			0x50000
+#define LSIO_PWM_6_LPCG			0x60000
+#define LSIO_PWM_7_LPCG			0x70000
+#define LSIO_GPIO_0_LPCG		0x80000
+#define LSIO_GPIO_1_LPCG		0x90000
+#define LSIO_GPIO_2_LPCG		0xa0000
+#define LSIO_GPIO_3_LPCG		0xb0000
+#define LSIO_GPIO_4_LPCG		0xc0000
+#define LSIO_GPIO_5_LPCG		0xd0000
+#define LSIO_GPIO_6_LPCG		0xe0000
+#define LSIO_GPIO_7_LPCG		0xf0000
+#define LSIO_FSPI_0_LPCG		0x120000
+#define LSIO_FSPI_1_LPCG		0x130000
+#define LSIO_GPT_0_LPCG			0x140000
+#define LSIO_GPT_1_LPCG			0x150000
+#define LSIO_GPT_2_LPCG			0x160000
+#define LSIO_GPT_3_LPCG			0x170000
+#define LSIO_GPT_4_LPCG			0x180000
+#define LSIO_OCRAM_LPCG			0x190000
+#define LSIO_KPP_LPCG			0x1a0000
+#define LSIO_ROMCP_LPCG			0x100000
+
+/* Connectivity SS */
+#define CONN_USDHC_0_LPCG		0x00000
+#define CONN_USDHC_1_LPCG		0x10000
+#define CONN_USDHC_2_LPCG		0x20000
+#define CONN_ENET_0_LPCG		0x30000
+#define CONN_ENET_1_LPCG		0x40000
+#define CONN_DTCP_LPCG			0x50000
+#define CONN_MLB_LPCG			0x60000
+#define CONN_USB_2_LPCG			0x70000
+#define CONN_USB_3_LPCG			0x80000
+#define CONN_NAND_LPCG			0x90000
+#define CONN_EDMA_LPCG			0xa0000
+
+/* ADMA SS */
+#define ADMA_ASRC_0_LPCG		0x400000
+#define ADMA_ESAI_0_LPCG		0x410000
+#define ADMA_SPDIF_0_LPCG		0x420000
+#define ADMA_SAI_0_LPCG			0x440000
+#define ADMA_SAI_1_LPCG			0x450000
+#define ADMA_SAI_2_LPCG			0x460000
+#define ADMA_SAI_3_LPCG			0x470000
+#define ADMA_GPT_5_LPCG			0x4b0000
+#define ADMA_GPT_6_LPCG			0x4c0000
+#define ADMA_GPT_7_LPCG			0x4d0000
+#define ADMA_GPT_8_LPCG			0x4e0000
+#define ADMA_GPT_9_LPCG			0x4f0000
+#define ADMA_GPT_10_LPCG		0x500000
+#define ADMA_HIFI_LPCG			0x580000
+#define ADMA_OCRAM_LPCG			0x590000
+#define ADMA_EDMA_0_LPCG		0x5f0000
+#define ADMA_ASRC_1_LPCG		0xc00000
+#define ADMA_SAI_4_LPCG			0xc20000
+#define ADMA_SAI_5_LPCG			0xc30000
+#define ADMA_AMIX_LPCG			0xc40000
+#define ADMA_MQS_LPCG			0xc50000
+#define ADMA_ACM_LPCG			0xc60000
+#define ADMA_REC_CLK0_LPCG		0xd00000
+#define ADMA_REC_CLK1_LPCG		0xd10000
+#define ADMA_PLL_CLK0_LPCG		0xd20000
+#define ADMA_PLL_CLK1_LPCG		0xd30000
+#define ADMA_MCLKOUT0_LPCG		0xd50000
+#define ADMA_MCLKOUT1_LPCG		0xd60000
+#define ADMA_EDMA_1_LPCG		0xdf0000
+#define ADMA_LPSPI_0_LPCG		0x1400000
+#define ADMA_LPSPI_1_LPCG		0x1410000
+#define ADMA_LPSPI_2_LPCG		0x1420000
+#define ADMA_LPSPI_3_LPCG		0x1430000
+#define ADMA_LPUART_0_LPCG		0x1460000
+#define ADMA_LPUART_1_LPCG		0x1470000
+#define ADMA_LPUART_2_LPCG		0x1480000
+#define ADMA_LPUART_3_LPCG		0x1490000
+#define ADMA_LCD_LPCG			0x1580000
+#define ADMA_PWM_LPCG			0x1590000
+#define ADMA_LPI2C_0_LPCG		0x1c00000
+#define ADMA_LPI2C_1_LPCG		0x1c10000
+#define ADMA_LPI2C_2_LPCG		0x1c20000
+#define ADMA_LPI2C_3_LPCG		0x1c30000
+#define ADMA_ADC_0_LPCG			0x1c80000
+#define ADMA_FTM_0_LPCG			0x1ca0000
+#define ADMA_FTM_1_LPCG			0x1cb0000
+#define ADMA_FLEXCAN_0_LPCG		0x1cd0000
+#define ADMA_FLEXCAN_1_LPCG		0x1ce0000
+#define ADMA_FLEXCAN_2_LPCG		0x1cf0000
+
+#endif /* _IMX8QXP_LPCG_H */
-- 
cgit v1.2.3-59-g8ed1b