From 137bd11090d89b3a3ef4bdb7a6cf964ffc797517 Mon Sep 17 00:00:00 2001 From: Jon Medhurst Date: Fri, 7 Nov 2014 18:05:17 +0000 Subject: dmaengine: pl330: Align DMA memcpy operations to MFIFO width The algorithm used for programming the DMA Controller doesn't take into consideration the requirements of transfers that are not aligned to the bus width. This failure may result in DMA transferring one too few MFIFO entries (so too few bytes are copied) or the DMA trying to write one too many MFIFO entries and hanging because this is never provided. See "MFIFO Usage Overview" chapter in the the TRM for "CoreLink DMA Controller DMA-330", Revision r1p1. We work around these shortcomings by making sure we pick a burst size and length which ensures no bursts straddle an MFIFO entry. Signed-off-by: Jon Medhurst [squashed linker error "undefined reference to `__aeabi_uldivmod] Reported-by: kbuild test robot Acked-by: Arnd Bergmann Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'drivers/dma') diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 4839bfa74a10..81505420bde4 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2459,16 +2459,25 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, /* Select max possible burst size */ burst = pl330->pcfg.data_bus_width / 8; - while (burst > 1) { - if (!(len % burst)) - break; + /* + * Make sure we use a burst size that aligns with all the memcpy + * parameters because our DMA programming algorithm doesn't cope with + * transfers which straddle an entry in the DMA device's MFIFO. + */ + while ((src | dst | len) & (burst - 1)) burst /= 2; - } desc->rqcfg.brst_size = 0; while (burst != (1 << desc->rqcfg.brst_size)) desc->rqcfg.brst_size++; + /* + * If burst size is smaller than bus width then make sure we only + * transfer one at a time to avoid a burst stradling an MFIFO entry. + */ + if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width) + desc->rqcfg.brst_len = 1; + desc->rqcfg.brst_len = get_burst_len(desc, len); desc->txd.flags = flags; -- cgit v1.2.3-59-g8ed1b