From 5f982c70a7c3382d3532ac6d13fdea48ab38b934 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Fri, 22 May 2015 17:35:48 +0300 Subject: gpio: omap: fix omap_gpio_free to not clean up irq configuration This patch fixes following issue: - GPIOn is used as IRQ by some dev, for example PCF8575.INT -> gpio6.11 - PCFx driver knows nothing about type of IRQ line (GPIO or not) so it doesn't request gpio and just do request_irq() - If gpio6.11 will be exported through the sysfs and then un-xeported then IRQs from PCFx will not be received any more, because IRQ configuration for gpio6.11 will be cleaned up unconditionally in omap_gpio_free. Fix this by removing all GPIO IRQ specific code from omap_gpio_free() and also do GPIO clean up (change direction to 'in' and disable debounce) only if corresponding GPIO is not used as IRQ too. GPIO IRQ will be properly cleaned up by GPIO irqchip code. Signed-off-by: Grygorii Strashko Tested-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/gpio/gpio-omap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpio') diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 6efee35f0ad4..505266153b4c 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -690,8 +690,11 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) spin_lock_irqsave(&bank->lock, flags); bank->mod_usage &= ~(BIT(offset)); + if (!LINE_USED(bank->irq_usage, offset)) { + omap_set_gpio_direction(bank, offset, 1); + omap_clear_gpio_debounce(bank, offset); + } omap_disable_gpio_module(bank, offset); - omap_reset_gpio(bank, offset); spin_unlock_irqrestore(&bank->lock, flags); /* -- cgit v1.2.3-59-g8ed1b