From df3c851716424fda0c7b14c4cae71cea467a9944 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 09:08:15 -0700
Subject: gpio/omap: _clear_gpio_irqbank: fix flushing of posted write

In commit 78a1a6d3411de1a8b0dc1cb92754b5f12f251912 (ARM: OMAP4: Update
the GPIO support) braces were mistakenly added to included the
register read-back inside the cpu_is_* checking.

Remove the braces, ensuring that a register read-back is done, even
when the IRQSTATUS2 register is not written.

Note that the register read-back might be IRQSTATUS1 or IRQSTATUS2
depending on the CPU, but a read-back of any register in that region
will cause a flush of the posted writes.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 01f74a8459d9..2ca814294c5e 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -700,12 +700,11 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	else if (cpu_is_omap44xx())
 		reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
 
-	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx())
 		__raw_writel(gpio_mask, reg);
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
 	__raw_readl(reg);
-	}
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
-- 
cgit v1.2.3-59-g8ed1b


From bdba15db4d81940776ab96ea9f558b7388b0f7fe Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 08:44:45 -0700
Subject: gpio/omap: remove MPUIO handling from _clear_gpio_irqbank()

Remove the OMAP1 #ifdef and MPUIO special case for _clear_gpio_irqbank()

The MPUIOs do not need a register access to ack/clear the IRQ status,
since reading the IRQ status clears it.  In addition, the MPUIO
irq_chip has an empty ack method, so _clear_gpio_irqbank() is never
used for MPUIOs.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 2ca814294c5e..7135810a77bc 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -657,12 +657,6 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	void __iomem *reg = bank->base;
 
 	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		/* MPUIO irqstatus is reset by reading the status register,
-		 * so do nothing here */
-		return;
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_STATUS;
-- 
cgit v1.2.3-59-g8ed1b


From d5f46247e77a63bc3bb4b3f979281e5c700c218e Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 09:23:00 -0700
Subject: gpio/omap: move bank width into struct gpio_bank

Rather than having a file-global bank_width variable, move it into
struct gpio_bank so it can be bank-specific.   Note the bank width
is already passed per-bank via platform_data, so current code would
be incorrect if any banks had different width.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 7135810a77bc..3f436c033611 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -54,6 +54,7 @@ struct gpio_bank {
 	struct device *dev;
 	bool dbck_flag;
 	int stride;
+	u32 width;
 };
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -79,8 +80,6 @@ static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
  */
 static struct gpio_bank *gpio_bank;
 
-static int bank_width;
-
 /* TODO: Analyze removing gpio_bank_count usage from driver code */
 int gpio_bank_count;
 
@@ -870,7 +869,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 		if (bank->non_wakeup_gpios & (1 << gpio)) {
 			printk(KERN_ERR "Unable to modify wakeup on "
 					"non-wakeup GPIO%d\n",
-					(bank - gpio_bank) * 32 + gpio);
+			       (bank - gpio_bank) * bank->width + gpio);
 			return -EINVAL;
 		}
 		spin_lock_irqsave(&bank->lock, flags);
@@ -1545,14 +1544,14 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
 	} else {
 		bank->chip.label = "gpio";
 		bank->chip.base = gpio;
-		gpio += bank_width;
+		gpio += bank->width;
 	}
-	bank->chip.ngpio = bank_width;
+	bank->chip.ngpio = bank->width;
 
 	gpiochip_add(&bank->chip);
 
 	for (j = bank->virtual_irq_start;
-		     j < bank->virtual_irq_start + bank_width; j++) {
+		     j < bank->virtual_irq_start + bank->width; j++) {
 		irq_set_lockdep_class(j, &gpio_lock_class);
 		irq_set_chip_data(j, bank);
 		if (bank_is_mpuio(bank))
@@ -1602,7 +1601,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
 	bank->dev = &pdev->dev;
 	bank->dbck_flag = pdata->dbck_flag;
 	bank->stride = pdata->bank_stride;
-	bank_width = pdata->bank_width;
+	bank->width = pdata->bank_width;
 
 	spin_lock_init(&bank->lock);
 
-- 
cgit v1.2.3-59-g8ed1b


From c390aad0330f330ce9818ef5269169bbae335da9 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 09:33:36 -0700
Subject: gpio/omap: _get_gpio_irqbank_mask: replace hard-coded mask with
 bank->width

Replace hard-coded mask values with bank->width which is already coming
from platform_data.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 3f436c033611..0766aa1c3f31 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -710,46 +710,40 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 	void __iomem *reg = bank->base;
 	int inv = 0;
 	u32 l;
-	u32 mask;
+	u32 mask = (1 << bank->width) - 1;
 
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-		mask = 0xffff;
 		inv = 1;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_MASK;
-		mask = 0xffff;
 		inv = 1;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	case METHOD_GPIO_1610:
 		reg += OMAP1610_GPIO_IRQENABLE1;
-		mask = 0xffff;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 	case METHOD_GPIO_7XX:
 		reg += OMAP7XX_GPIO_INT_MASK;
-		mask = 0xffffffff;
 		inv = 1;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
-		mask = 0xffffffff;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
 	case METHOD_GPIO_44XX:
 		reg += OMAP4_GPIO_IRQSTATUSSET0;
-		mask = 0xffffffff;
 		break;
 #endif
 	default:
-- 
cgit v1.2.3-59-g8ed1b


From 129fd2230733ff0457e76d6aabde136cf8666bc0 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Fri, 22 Apr 2011 07:59:07 -0700
Subject: gpio/omap: replace get_gpio_index() by using bank width

The get_gpio_index() function, littered with cpu_is_* checks can be easily
replaced by using bitops based on the GPIO bank width.  Do so.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 42 +++++++++++++++++-------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0766aa1c3f31..72811a3b9158 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -83,6 +83,9 @@ static struct gpio_bank *gpio_bank;
 /* TODO: Analyze removing gpio_bank_count usage from driver code */
 int gpio_bank_count;
 
+#define GPIO_INDEX(bank, gpio) (gpio % bank->width)
+#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
+
 static inline struct gpio_bank *get_gpio_bank(int gpio)
 {
 	if (cpu_is_omap15xx()) {
@@ -108,17 +111,6 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 	return NULL;
 }
 
-static inline int get_gpio_index(int gpio)
-{
-	if (cpu_is_omap7xx())
-		return gpio & 0x1f;
-	if (cpu_is_omap24xx())
-		return gpio & 0x1f;
-	if (cpu_is_omap34xx() || cpu_is_omap44xx())
-		return gpio & 0x1f;
-	return gpio & 0x0f;
-}
-
 static inline int gpio_valid(int gpio)
 {
 	if (gpio < 0)
@@ -313,7 +305,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 		return -EINVAL;
 	}
 	return (__raw_readl(reg)
-			& (1 << get_gpio_index(gpio))) != 0;
+			& (GPIO_BIT(bank, gpio))) != 0;
 }
 
 static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
@@ -359,7 +351,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		return -EINVAL;
 	}
 
-	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
 
 #define MOD_REG_BIT(reg, bit_mask, set)	\
@@ -396,7 +388,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 	else
 		debounce = (debounce / 0x1f) - 1;
 
-	l = 1 << get_gpio_index(gpio);
+	l = GPIO_BIT(bank, gpio);
 
 	if (bank->method == METHOD_GPIO_44XX)
 		reg += OMAP4_GPIO_DEBOUNCINGTIME;
@@ -640,7 +632,7 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
 
 	bank = irq_data_get_irq_chip_data(d);
 	spin_lock_irqsave(&bank->lock, flags);
-	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
+	retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type);
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
@@ -702,7 +694,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
 {
-	_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
+	_clear_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
 }
 
 static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
@@ -830,7 +822,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 
 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
 {
-	_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
+	_enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio), enable);
 }
 
 /*
@@ -883,10 +875,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 
 static void _reset_gpio(struct gpio_bank *bank, int gpio)
 {
-	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
+	_set_gpio_direction(bank, GPIO_INDEX(bank, gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
 	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+	_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -899,7 +891,7 @@ static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
 	if (check_gpio(gpio) < 0)
 		return -ENODEV;
 	bank = irq_data_get_irq_chip_data(d);
-	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
+	retval = _set_gpio_wakeup(bank, GPIO_INDEX(bank, gpio), enable);
 
 	return retval;
 }
@@ -1079,7 +1071,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 		gpio_irq = bank->virtual_irq_start;
 		for (; isr != 0; isr >>= 1, gpio_irq++) {
-			gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+			gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq));
 
 			if (!(isr & 1))
 				continue;
@@ -1135,7 +1127,7 @@ static void gpio_mask_irq(struct irq_data *d)
 
 	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_irqenable(bank, gpio, 0);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+	_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
@@ -1143,13 +1135,13 @@ static void gpio_unmask_irq(struct irq_data *d)
 {
 	unsigned int gpio = d->irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	unsigned int irq_mask = GPIO_BIT(bank, gpio);
 	u32 trigger = irqd_get_trigger_type(d);
 	unsigned long flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
 	if (trigger)
-		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
+		_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), trigger);
 
 	/* For level-triggered GPIOs, the clearing must be done after
 	 * the HW source is cleared, thus after the handler has run */
@@ -1352,7 +1344,7 @@ static int gpio_get(struct gpio_chip *chip, unsigned offset)
 	gpio = chip->base + offset;
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
-	mask = 1 << get_gpio_index(gpio);
+	mask = GPIO_BIT(bank, gpio);
 
 	if (gpio_is_input(bank, mask))
 		return _get_gpio_datain(bank, gpio);
-- 
cgit v1.2.3-59-g8ed1b


From a8be8dafd00e3ccf4f85e2f30babf42be5076324 Mon Sep 17 00:00:00 2001
From: Charulatha V <charu@ti.com>
Date: Fri, 22 Apr 2011 16:38:16 +0530
Subject: gpio/omap: remove get_gpio_bank()

use chip info to get the pointer to the struct gpio_bank for a
given GPIO bank and remove get_gpio_bank().

Signed-off-by: Charulatha V <charu@ti.com>
---
 drivers/gpio/gpio-omap.c | 29 ++---------------------------
 1 file changed, 2 insertions(+), 27 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 72811a3b9158..25a7ee6bddb0 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -86,31 +86,6 @@ int gpio_bank_count;
 #define GPIO_INDEX(bank, gpio) (gpio % bank->width)
 #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
 
-static inline struct gpio_bank *get_gpio_bank(int gpio)
-{
-	if (cpu_is_omap15xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1];
-	}
-	if (cpu_is_omap16xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1 + (gpio >> 4)];
-	}
-	if (cpu_is_omap7xx()) {
-		if (OMAP_GPIO_IS_MPUIO(gpio))
-			return &gpio_bank[0];
-		return &gpio_bank[1 + (gpio >> 5)];
-	}
-	if (cpu_is_omap24xx())
-		return &gpio_bank[gpio >> 5];
-	if (cpu_is_omap34xx() || cpu_is_omap44xx())
-		return &gpio_bank[gpio >> 5];
-	BUG();
-	return NULL;
-}
-
 static inline int gpio_valid(int gpio)
 {
 	if (gpio < 0)
@@ -1266,7 +1241,7 @@ static struct platform_device omap_mpuio_device = {
 
 static inline void mpuio_init(void)
 {
-	struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
+	struct gpio_bank *bank = &gpio_bank[0];
 	platform_set_drvdata(&omap_mpuio_device, bank);
 
 	if (platform_driver_register(&omap_mpuio_driver) == 0)
@@ -1342,7 +1317,7 @@ static int gpio_get(struct gpio_chip *chip, unsigned offset)
 	u32 mask;
 
 	gpio = chip->base + offset;
-	bank = get_gpio_bank(gpio);
+	bank = container_of(chip, struct gpio_bank, chip);
 	reg = bank->base;
 	mask = GPIO_BIT(bank, gpio);
 
-- 
cgit v1.2.3-59-g8ed1b


From fa87931acb8203a1f40a3c637863ad238f70cd40 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Wed, 20 Apr 2011 16:31:23 -0700
Subject: gpio/omap: consolidate direction, input, output, remove #ifdefs

Add register offset fields to GPIO platform_data for registers.

This patch adds registers that control direction, input and output
data.  Using these register offsets in the common driver allows
removal of #ifdefs and greatly improves readability.

Also create dedicated data out functions: one for banks with dedicated
set/clear registers, and another for banks with a single mask
register.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap1/gpio15xx.c         |  14 ++
 arch/arm/mach-omap1/gpio16xx.c         |  19 +++
 arch/arm/mach-omap1/gpio7xx.c          |  19 +++
 arch/arm/mach-omap2/gpio.c             |  16 +++
 arch/arm/plat-omap/include/plat/gpio.h |  10 ++
 drivers/gpio/gpio-omap.c               | 243 ++++++---------------------------
 6 files changed, 121 insertions(+), 200 deletions(-)

(limited to 'drivers/gpio')

diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 04c4b04cf54e..a622d567b53e 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -34,11 +34,18 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
+	.direction	= OMAP_MPUIO_IO_CNTL,
+	.datain		= OMAP_MPUIO_INPUT_LATCH,
+	.dataout	= OMAP_MPUIO_OUTPUT,
+};
+
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
 	.bank_type		= METHOD_MPUIO,
 	.bank_width		= 16,
 	.bank_stride		= 1,
+	.regs			= &omap15xx_mpuio_regs,
 };
 
 static struct __initdata platform_device omap15xx_mpu_gpio = {
@@ -64,10 +71,17 @@ static struct __initdata resource omap15xx_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
+	.direction	= OMAP1510_GPIO_DIR_CONTROL,
+	.datain		= OMAP1510_GPIO_DATA_INPUT,
+	.dataout	= OMAP1510_GPIO_DATA_OUTPUT,
+};
+
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_type		= METHOD_GPIO_1510,
 	.bank_width		= 16,
+	.regs                   = &omap15xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap15xx_gpio = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 5dd0d4c82b24..4ff6ff36ab73 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -37,11 +37,18 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
+	.direction	= OMAP_MPUIO_IO_CNTL,
+	.datain		= OMAP_MPUIO_INPUT_LATCH,
+	.dataout	= OMAP_MPUIO_OUTPUT,
+};
+
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
 	.bank_type		= METHOD_MPUIO,
 	.bank_width		= 16,
 	.bank_stride		= 1,
+	.regs                   = &omap16xx_mpuio_regs,
 };
 
 static struct __initdata platform_device omap16xx_mpu_gpio = {
@@ -67,10 +74,19 @@ static struct __initdata resource omap16xx_gpio1_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
+	.direction	= OMAP1610_GPIO_DIRECTION,
+	.set_dataout	= OMAP1610_GPIO_SET_DATAOUT,
+	.clr_dataout	= OMAP1610_GPIO_CLEAR_DATAOUT,
+	.datain		= OMAP1610_GPIO_DATAIN,
+	.dataout	= OMAP1610_GPIO_DATAOUT,
+};
+
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap16xx_gpio1 = {
@@ -100,6 +116,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 16,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap16xx_gpio2 = {
@@ -129,6 +146,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap16xx_gpio3 = {
@@ -158,6 +176,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 48,
 	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap16xx_gpio4 = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 1204c8b871af..efe4dccaa4f2 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -39,11 +39,18 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
+	.direction	= OMAP_MPUIO_IO_CNTL / 2,
+	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
+	.dataout	= OMAP_MPUIO_OUTPUT / 2,
+};
+
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
 	.bank_type		= METHOD_MPUIO,
 	.bank_width		= 32,
 	.bank_stride		= 2,
+	.regs                   = &omap7xx_mpuio_regs,
 };
 
 static struct __initdata platform_device omap7xx_mpu_gpio = {
@@ -69,10 +76,17 @@ static struct __initdata resource omap7xx_gpio1_resources[] = {
 	},
 };
 
+static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
+	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
+	.datain		= OMAP7XX_GPIO_DATA_INPUT,
+	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
+};
+
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap7xx_gpio1 = {
@@ -102,6 +116,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap7xx_gpio2 = {
@@ -131,6 +146,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 64,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap7xx_gpio3 = {
@@ -160,6 +176,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 96,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap7xx_gpio4 = {
@@ -189,6 +206,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 128,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap7xx_gpio5 = {
@@ -218,6 +236,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 160,
 	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
 };
 
 static struct __initdata platform_device omap7xx_gpio6 = {
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9529842ae054..357e06956b0c 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -61,13 +61,29 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	pdata->dbck_flag = dev_attr->dbck_flag;
 	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
 
+	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("gpio%d: Memory allocation failed\n", id);
+		return -ENOMEM;
+	}
+
 	switch (oh->class->rev) {
 	case 0:
 	case 1:
 		pdata->bank_type = METHOD_GPIO_24XX;
+		pdata->regs->direction = OMAP24XX_GPIO_OE;
+		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
+		pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
+		pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
+		pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
 		break;
 	case 2:
 		pdata->bank_type = METHOD_GPIO_44XX;
+		pdata->regs->direction = OMAP4_GPIO_OE;
+		pdata->regs->datain = OMAP4_GPIO_DATAIN;
+		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
+		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
+		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index ec97e00cb581..268bccd0f7f6 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -174,12 +174,22 @@ struct omap_gpio_dev_attr {
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
 };
 
+struct omap_gpio_reg_offs {
+	u16 direction;
+	u16 datain;
+	u16 dataout;
+	u16 set_dataout;
+	u16 clr_dataout;
+};
+
 struct omap_gpio_platform_data {
 	u16 virtual_irq_start;
 	int bank_type;
 	int bank_width;		/* GPIO bank width */
 	int bank_stride;	/* Only needed for omap1 MPUIO */
 	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+
+	struct omap_gpio_reg_offs *regs;
 };
 
 /* TODO: Analyze removing gpio_bank_count usage from driver code */
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 25a7ee6bddb0..945642143e1b 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -55,6 +55,10 @@ struct gpio_bank {
 	bool dbck_flag;
 	int stride;
 	u32 width;
+
+	void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
+
+	struct omap_gpio_reg_offs *regs;
 };
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -125,41 +129,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	void __iomem *reg = bank->base;
 	u32 l;
 
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DIR_CONTROL;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_OE;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
+	reg += bank->regs->direction;
 	l = __raw_readl(reg);
 	if (is_input)
 		l |= 1 << gpio;
@@ -168,163 +138,52 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	__raw_writel(l, reg);
 }
 
-static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
+
+/* set data out value using dedicate set/clear register */
+static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable)
 {
 	void __iomem *reg = bank->base;
-	u32 l = 0;
+	u32 l = GPIO_BIT(bank, gpio);
 
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT / bank->stride;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (enable)
-			reg += OMAP1610_GPIO_SET_DATAOUT;
-		else
-			reg += OMAP1610_GPIO_CLEAR_DATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		if (enable)
-			reg += OMAP24XX_GPIO_SETDATAOUT;
-		else
-			reg += OMAP24XX_GPIO_CLEARDATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		if (enable)
-			reg += OMAP4_GPIO_SETDATAOUT;
-		else
-			reg += OMAP4_GPIO_CLEARDATAOUT;
-		l = 1 << gpio;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
+	if (enable)
+		reg += bank->regs->set_dataout;
+	else
+		reg += bank->regs->clr_dataout;
+
+	__raw_writel(l, reg);
+}
+
+/* set data out value using mask register */
+static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
+{
+	void __iomem *reg = bank->base + bank->regs->dataout;
+	u32 gpio_bit = GPIO_BIT(bank, gpio);
+	u32 l;
+
+	l = __raw_readl(reg);
+	if (enable)
+		l |= gpio_bit;
+	else
+		l &= ~gpio_bit;
 	__raw_writel(l, reg);
 }
 
 static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-	void __iomem *reg;
+	void __iomem *reg = bank->base + bank->regs->datain;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
-	reg = bank->base;
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_INPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DATAIN;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_INPUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_DATAIN;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_DATAIN;
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
-	return (__raw_readl(reg)
-			& (GPIO_BIT(bank, gpio))) != 0;
+
+	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
 
 static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 {
-	void __iomem *reg;
+	void __iomem *reg = bank->base + bank->regs->dataout;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
-	reg = bank->base;
-
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT / bank->stride;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DATAOUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_DATAOUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_DATAOUT;
-		break;
-#endif
-	default:
-		return -EINVAL;
-	}
 
 	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
@@ -1281,31 +1140,8 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 
 static int gpio_is_input(struct gpio_bank *bank, int mask)
 {
-	void __iomem *reg = bank->base;
+	void __iomem *reg = bank->base + bank->regs->direction;
 
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
-		break;
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_OE;
-		break;
-	default:
-		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
-		return -EINVAL;
-	}
 	return __raw_readl(reg) & mask;
 }
 
@@ -1334,7 +1170,7 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
 
 	bank = container_of(chip, struct gpio_bank, chip);
 	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_dataout(bank, offset, value);
+	bank->set_dataout(bank, offset, value);
 	_set_gpio_direction(bank, offset, 0);
 	spin_unlock_irqrestore(&bank->lock, flags);
 	return 0;
@@ -1368,7 +1204,7 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 	bank = container_of(chip, struct gpio_bank, chip);
 	spin_lock_irqsave(&bank->lock, flags);
-	_set_gpio_dataout(bank, offset, value);
+	bank->set_dataout(bank, offset, value);
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
@@ -1564,6 +1400,13 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
 	bank->stride = pdata->bank_stride;
 	bank->width = pdata->bank_width;
 
+	bank->regs = pdata->regs;
+
+	if (bank->regs->set_dataout && bank->regs->clr_dataout)
+		bank->set_dataout = _set_gpio_dataout_reg;
+	else
+		bank->set_dataout = _set_gpio_dataout_mask;
+
 	spin_lock_init(&bank->lock);
 
 	/* Static mapping, never released */
-- 
cgit v1.2.3-59-g8ed1b


From eef4bec7bf2fa9953f6b8f371d5914d014f45d40 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 09:17:35 -0700
Subject: gpio/omap: consolidate IRQ status handling, remove #ifdefs

Cleanup IRQ status handling by passing IRQ status register offsets
via platform data.

Cleans up clearing of GPIO IRQ status and GPIO ISR handler.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap1/gpio15xx.c         |  2 ++
 arch/arm/mach-omap1/gpio16xx.c         |  2 ++
 arch/arm/mach-omap1/gpio7xx.c          |  2 ++
 arch/arm/mach-omap2/gpio.c             |  4 +++
 arch/arm/plat-omap/include/plat/gpio.h |  2 ++
 drivers/gpio/gpio-omap.c               | 66 +++-------------------------------
 6 files changed, 17 insertions(+), 61 deletions(-)

(limited to 'drivers/gpio')

diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index a622d567b53e..487a08749655 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -38,6 +38,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 	.direction	= OMAP_MPUIO_IO_CNTL,
 	.datain		= OMAP_MPUIO_INPUT_LATCH,
 	.dataout	= OMAP_MPUIO_OUTPUT,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
@@ -75,6 +76,7 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 	.direction	= OMAP1510_GPIO_DIR_CONTROL,
 	.datain		= OMAP1510_GPIO_DATA_INPUT,
 	.dataout	= OMAP1510_GPIO_DATA_OUTPUT,
+	.irqstatus	= OMAP1510_GPIO_INT_STATUS,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 4ff6ff36ab73..3e52b7f3d9cb 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -41,6 +41,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 	.direction	= OMAP_MPUIO_IO_CNTL,
 	.datain		= OMAP_MPUIO_INPUT_LATCH,
 	.dataout	= OMAP_MPUIO_OUTPUT,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
@@ -80,6 +81,7 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 	.clr_dataout	= OMAP1610_GPIO_CLEAR_DATAOUT,
 	.datain		= OMAP1610_GPIO_DATAIN,
 	.dataout	= OMAP1610_GPIO_DATAOUT,
+	.irqstatus	= OMAP1610_GPIO_IRQSTATUS1,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index efe4dccaa4f2..35e8b31688d0 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -43,6 +43,7 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 	.direction	= OMAP_MPUIO_IO_CNTL / 2,
 	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
 	.dataout	= OMAP_MPUIO_OUTPUT / 2,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
@@ -80,6 +81,7 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
 	.datain		= OMAP7XX_GPIO_DATA_INPUT,
 	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
+	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 357e06956b0c..7c5e67d0b635 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -76,6 +76,8 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
 		pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
 		pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
+		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
+		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
 		break;
 	case 2:
 		pdata->bank_type = METHOD_GPIO_44XX;
@@ -84,6 +86,8 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
 		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
 		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
+		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
+		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 268bccd0f7f6..aedd732ef464 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -180,6 +180,8 @@ struct omap_gpio_reg_offs {
 	u16 dataout;
 	u16 set_dataout;
 	u16 clr_dataout;
+	u16 irqstatus;
+	u16 irqstatus2;
 };
 
 struct omap_gpio_platform_data {
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 945642143e1b..bdf0132b70ec 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -481,46 +481,14 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 {
 	void __iomem *reg = bank->base;
 
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_STATUS;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_IRQSTATUS1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_STATUS;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_IRQSTATUS1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_IRQSTATUS0;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
-	}
+	reg += bank->regs->irqstatus;
 	__raw_writel(gpio_mask, reg);
 
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-	else if (cpu_is_omap44xx())
-		reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx())
+	if (bank->regs->irqstatus2) {
+		reg = bank->base + bank->regs->irqstatus2;
 		__raw_writel(gpio_mask, reg);
+	}
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
 	__raw_readl(reg);
@@ -841,31 +809,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 
 	bank = irq_get_handler_data(irq);
-#ifdef CONFIG_ARCH_OMAP1
-	if (bank->method == METHOD_MPUIO)
-		isr_reg = bank->base +
-				OMAP_MPUIO_GPIO_INT / bank->stride;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (bank->method == METHOD_GPIO_1510)
-		isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (bank->method == METHOD_GPIO_1610)
-		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (bank->method == METHOD_GPIO_7XX)
-		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	if (bank->method == METHOD_GPIO_24XX)
-		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	if (bank->method == METHOD_GPIO_44XX)
-		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
-#endif
+	isr_reg = bank->base + bank->regs->irqstatus;
 
 	if (WARN_ON(!isr_reg))
 		goto exit;
-- 
cgit v1.2.3-59-g8ed1b


From 28f3b5a073b6dbafbb78cae65b22ea90547d7a87 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 09:53:06 -0700
Subject: gpio/omap: conslidate enable/disable of GPIO IRQs, remove ifdefs

Cleanup GPIO IRQ enable/disable handling by removing SoC-specific

Also split enable/disable IRQ into separate functions for better
readability and also facilitate potentially moving to generic irq_chip
in the future.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap1/gpio15xx.c         |   4 +
 arch/arm/mach-omap1/gpio16xx.c         |   5 ++
 arch/arm/mach-omap1/gpio7xx.c          |   4 +
 arch/arm/mach-omap2/gpio.c             |   6 ++
 arch/arm/plat-omap/include/plat/gpio.h |   5 ++
 drivers/gpio/gpio-omap.c               | 129 ++++++++-------------------------
 6 files changed, 54 insertions(+), 99 deletions(-)

(limited to 'drivers/gpio')

diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 487a08749655..91756245e860 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -39,6 +39,8 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 	.datain		= OMAP_MPUIO_INPUT_LATCH,
 	.dataout	= OMAP_MPUIO_OUTPUT,
 	.irqstatus	= OMAP_MPUIO_GPIO_INT,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
+	.irqenable_inv	= true,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
@@ -77,6 +79,8 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 	.datain		= OMAP1510_GPIO_DATA_INPUT,
 	.dataout	= OMAP1510_GPIO_DATA_OUTPUT,
 	.irqstatus	= OMAP1510_GPIO_INT_STATUS,
+	.irqenable	= OMAP1510_GPIO_INT_MASK,
+	.irqenable_inv	= true,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 3e52b7f3d9cb..a6d4a71ea4af 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -42,6 +42,8 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 	.datain		= OMAP_MPUIO_INPUT_LATCH,
 	.dataout	= OMAP_MPUIO_OUTPUT,
 	.irqstatus	= OMAP_MPUIO_GPIO_INT,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
+	.irqenable_inv	= true,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
@@ -82,6 +84,9 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 	.datain		= OMAP1610_GPIO_DATAIN,
 	.dataout	= OMAP1610_GPIO_DATAOUT,
 	.irqstatus	= OMAP1610_GPIO_IRQSTATUS1,
+	.irqenable	= OMAP1610_GPIO_IRQENABLE1,
+	.set_irqenable	= OMAP1610_GPIO_SET_IRQENABLE1,
+	.clr_irqenable	= OMAP1610_GPIO_CLEAR_IRQENABLE1,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 35e8b31688d0..12bcd9f2864a 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -44,6 +44,8 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
 	.dataout	= OMAP_MPUIO_OUTPUT / 2,
 	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
+	.irqenable_inv	= true,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
@@ -82,6 +84,8 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 	.datain		= OMAP7XX_GPIO_DATA_INPUT,
 	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
 	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
+	.irqenable	= OMAP7XX_GPIO_INT_MASK,
+	.irqenable_inv	= true,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 7c5e67d0b635..cc26677a12f8 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -78,6 +78,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
 		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
 		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
+		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
+		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
+		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
 		break;
 	case 2:
 		pdata->bank_type = METHOD_GPIO_44XX;
@@ -88,6 +91,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
 		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
 		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
+		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
+		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index aedd732ef464..c7e3a56340c0 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -182,6 +182,11 @@ struct omap_gpio_reg_offs {
 	u16 clr_dataout;
 	u16 irqstatus;
 	u16 irqstatus2;
+	u16 irqenable;
+	u16 set_irqenable;
+	u16 clr_irqenable;
+
+	bool irqenable_inv;
 };
 
 struct omap_gpio_platform_data {
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index bdf0132b70ec..6afca28a8c67 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -502,129 +502,60 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
 static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 {
 	void __iomem *reg = bank->base;
-	int inv = 0;
 	u32 l;
 	u32 mask = (1 << bank->width) - 1;
 
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_MASK;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_IRQENABLE1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_MASK;
-		inv = 1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_IRQENABLE1;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-	case METHOD_GPIO_44XX:
-		reg += OMAP4_GPIO_IRQSTATUSSET0;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return 0;
-	}
-
+	reg += bank->regs->irqenable;
 	l = __raw_readl(reg);
-	if (inv)
+	if (bank->regs->irqenable_inv)
 		l = ~l;
 	l &= mask;
 	return l;
 }
 
-static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
+static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 {
 	void __iomem *reg = bank->base;
 	u32 l;
 
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_MASK;
+	if (bank->regs->set_irqenable) {
+		reg += bank->regs->set_irqenable;
+		l = gpio_mask;
+	} else {
+		reg += bank->regs->irqenable;
 		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
+		if (bank->regs->irqenable_inv)
+			l &= ~gpio_mask;
 		else
 			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
-		if (enable)
-			reg += OMAP1610_GPIO_SET_IRQENABLE1;
-		else
-			reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
+	}
+
+	__raw_writel(l, reg);
+}
+
+static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+	void __iomem *reg = bank->base;
+	u32 l;
+
+	if (bank->regs->clr_irqenable) {
+		reg += bank->regs->clr_irqenable;
 		l = gpio_mask;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_MASK;
+	} else {
+		reg += bank->regs->irqenable;
 		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
+		if (bank->regs->irqenable_inv)
 			l |= gpio_mask;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	case METHOD_GPIO_24XX:
-		if (enable)
-			reg += OMAP24XX_GPIO_SETIRQENABLE1;
-		else
-			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
-		l = gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	case METHOD_GPIO_44XX:
-		if (enable)
-			reg += OMAP4_GPIO_IRQSTATUSSET0;
 		else
-			reg += OMAP4_GPIO_IRQSTATUSCLR0;
-		l = gpio_mask;
-		break;
-#endif
-	default:
-		WARN_ON(1);
-		return;
+			l &= ~gpio_mask;
 	}
+
 	__raw_writel(l, reg);
 }
 
 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
 {
-	_enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio), enable);
+	_enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
 }
 
 /*
@@ -831,9 +762,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		/* clear edge sensitive interrupts before handler(s) are
 		called so that we don't miss any interrupt occurred while
 		executing them */
-		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
+		_disable_gpio_irqbank(bank, isr_saved & ~level_mask);
 		_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
-		_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
+		_enable_gpio_irqbank(bank, isr_saved & ~level_mask);
 
 		/* if there is only edge sensitive GPIO pin interrupts
 		configured, we could unmask GPIO bank interrupt immediately */
-- 
cgit v1.2.3-59-g8ed1b


From f8b46b58348f151e45274c93ebe51467cf10e2f2 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Thu, 21 Apr 2011 13:23:34 -0700
Subject: gpio/omap: convert MPUIO IRQ over to generic irq_chip

MPUIO banks have their own dedicated IRQ chip interface, separate from
the "normal" GPIO banks.   Convert the MPUIO IRQ chip over to using
the new generic IRQ chip interface.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 74 ++++++++++++++++++++----------------------------
 1 file changed, 30 insertions(+), 44 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 6afca28a8c67..e5667baf5004 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -877,45 +877,8 @@ static struct irq_chip gpio_irq_chip = {
 
 #ifdef CONFIG_ARCH_OMAP1
 
-/* MPUIO uses the always-on 32k clock */
-
-static void mpuio_ack_irq(struct irq_data *d)
-{
-	/* The ISR is reset automatically, so do nothing here. */
-}
-
-static void mpuio_mask_irq(struct irq_data *d)
-{
-	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	_set_gpio_irqenable(bank, gpio, 0);
-}
-
-static void mpuio_unmask_irq(struct irq_data *d)
-{
-	unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
-	struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
-	_set_gpio_irqenable(bank, gpio, 1);
-}
-
-static struct irq_chip mpuio_irq_chip = {
-	.name		= "MPUIO",
-	.irq_ack	= mpuio_ack_irq,
-	.irq_mask	= mpuio_mask_irq,
-	.irq_unmask	= mpuio_unmask_irq,
-	.irq_set_type	= gpio_irq_type,
-#ifdef CONFIG_ARCH_OMAP16XX
-	/* REVISIT: assuming only 16xx supports MPUIO wake events */
-	.irq_set_wake	= gpio_wake_enable,
-#endif
-};
-
-
 #define bank_is_mpuio(bank)	((bank)->method == METHOD_MPUIO)
 
-
 #ifdef CONFIG_ARCH_OMAP16XX
 
 #include <linux/platform_device.h>
@@ -988,8 +951,6 @@ static inline void mpuio_init(void) {}
 
 #else
 
-extern struct irq_chip mpuio_irq_chip;
-
 #define bank_is_mpuio(bank)	0
 static inline void mpuio_init(void) {}
 
@@ -1189,6 +1150,30 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
 	}
 }
 
+static __init void
+omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
+		    unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
+				    handle_simple_irq);
+	ct = gc->chip_types;
+
+	/* NOTE: No ack required, reading IRQ status clears it. */
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+	ct->chip.irq_set_type = gpio_irq_type;
+	/* REVISIT: assuming only 16xx supports MPUIO wake events */
+	if (cpu_is_omap16xx())
+		ct->chip.irq_set_wake = gpio_wake_enable,
+
+	ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
+	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+}
+
 static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
 {
 	int j;
@@ -1226,12 +1211,13 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
 		     j < bank->virtual_irq_start + bank->width; j++) {
 		irq_set_lockdep_class(j, &gpio_lock_class);
 		irq_set_chip_data(j, bank);
-		if (bank_is_mpuio(bank))
-			irq_set_chip(j, &mpuio_irq_chip);
-		else
+		if (bank_is_mpuio(bank)) {
+			omap_mpuio_alloc_gc(bank, j, bank->width);
+		} else {
 			irq_set_chip(j, &gpio_irq_chip);
-		irq_set_handler(j, handle_simple_irq);
-		set_irq_flags(j, IRQF_VALID);
+			irq_set_handler(j, handle_simple_irq);
+			set_irq_flags(j, IRQF_VALID);
+		}
 	}
 	irq_set_chained_handler(bank->irq, gpio_irq_handler);
 	irq_set_handler_data(bank->irq, bank);
-- 
cgit v1.2.3-59-g8ed1b


From 7a6f8416e22a6d9f4708847bb2d88f0719b0f49e Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Fri, 22 Apr 2011 08:15:46 -0700
Subject: gpio/omap: remove useless gpio_valid() & check_gpio() checks

These functions are useless.  They are only called in a few places,
and where they are called, the GPIO has already been converted from an
IRQ or masked, so these functions will never fail.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 45 ---------------------------------------------
 1 file changed, 45 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e5667baf5004..857ec3939fdd 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -90,40 +90,6 @@ int gpio_bank_count;
 #define GPIO_INDEX(bank, gpio) (gpio % bank->width)
 #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
 
-static inline int gpio_valid(int gpio)
-{
-	if (gpio < 0)
-		return -1;
-	if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
-		if (gpio >= OMAP_MAX_GPIO_LINES + 16)
-			return -1;
-		return 0;
-	}
-	if (cpu_is_omap15xx() && gpio < 16)
-		return 0;
-	if ((cpu_is_omap16xx()) && gpio < 64)
-		return 0;
-	if (cpu_is_omap7xx() && gpio < 192)
-		return 0;
-	if (cpu_is_omap2420() && gpio < 128)
-		return 0;
-	if (cpu_is_omap2430() && gpio < 160)
-		return 0;
-	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
-		return 0;
-	return -1;
-}
-
-static int check_gpio(int gpio)
-{
-	if (unlikely(gpio_valid(gpio) < 0)) {
-		printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
-		dump_stack();
-		return -1;
-	}
-	return 0;
-}
-
 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 {
 	void __iomem *reg = bank->base;
@@ -172,9 +138,6 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
 	void __iomem *reg = bank->base + bank->regs->datain;
 
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
 	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
 
@@ -182,9 +145,6 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 {
 	void __iomem *reg = bank->base + bank->regs->dataout;
 
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
 	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
 
@@ -453,9 +413,6 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
 	else
 		gpio = d->irq - IH_GPIO_BASE;
 
-	if (check_gpio(gpio) < 0)
-		return -EINVAL;
-
 	if (type & ~IRQ_TYPE_SENSE_MASK)
 		return -EINVAL;
 
@@ -621,8 +578,6 @@ static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
 	struct gpio_bank *bank;
 	int retval;
 
-	if (check_gpio(gpio) < 0)
-		return -ENODEV;
 	bank = irq_data_get_irq_chip_data(d);
 	retval = _set_gpio_wakeup(bank, GPIO_INDEX(bank, gpio), enable);
 
-- 
cgit v1.2.3-59-g8ed1b


From f64ad1a0e21a4948894c7a1b6f2f03b5e7151ddf Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Fri, 22 Apr 2011 09:45:27 -0700
Subject: gpio/omap: cleanup _set_gpio_wakeup(), remove ifdefs

Make _set_gpio_wakeup() generic by removing ifdefs.  Code for the
various SoCs/bank-methods was already the same, except for the
non-wakeup GPIO checking.  But that flag is set on a per-SoC basis, so
can be used for all SoCs.

While here, use dev_err() and remove GPIO bank calculation assumption
based on subtracting bank pointers.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 drivers/gpio/gpio-omap.c | 50 ++++++++++++++++--------------------------------
 1 file changed, 16 insertions(+), 34 deletions(-)

(limited to 'drivers/gpio')

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 857ec3939fdd..dbe0cf36e909 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -525,42 +525,24 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
  */
 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 {
-	unsigned long uninitialized_var(flags);
+	u32 gpio_bit = GPIO_BIT(bank, gpio);
+	unsigned long flags;
 
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_MPUIO:
-	case METHOD_GPIO_1610:
-		spin_lock_irqsave(&bank->lock, flags);
-		if (enable)
-			bank->suspend_wakeup |= (1 << gpio);
-		else
-			bank->suspend_wakeup &= ~(1 << gpio);
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
-		if (bank->non_wakeup_gpios & (1 << gpio)) {
-			printk(KERN_ERR "Unable to modify wakeup on "
-					"non-wakeup GPIO%d\n",
-			       (bank - gpio_bank) * bank->width + gpio);
-			return -EINVAL;
-		}
-		spin_lock_irqsave(&bank->lock, flags);
-		if (enable)
-			bank->suspend_wakeup |= (1 << gpio);
-		else
-			bank->suspend_wakeup &= ~(1 << gpio);
-		spin_unlock_irqrestore(&bank->lock, flags);
-		return 0;
-#endif
-	default:
-		printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
-		       bank->method);
+	if (bank->non_wakeup_gpios & gpio_bit) {
+		dev_err(bank->dev, 
+			"Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
 		return -EINVAL;
 	}
+
+	spin_lock_irqsave(&bank->lock, flags);
+	if (enable)
+		bank->suspend_wakeup |= gpio_bit;
+	else
+		bank->suspend_wakeup &= ~gpio_bit;
+
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
 }
 
 static void _reset_gpio(struct gpio_bank *bank, int gpio)
@@ -579,7 +561,7 @@ static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
 	int retval;
 
 	bank = irq_data_get_irq_chip_data(d);
-	retval = _set_gpio_wakeup(bank, GPIO_INDEX(bank, gpio), enable);
+	retval = _set_gpio_wakeup(bank, gpio, enable);
 
 	return retval;
 }
-- 
cgit v1.2.3-59-g8ed1b


From 9942da0e4b037a852b230208410141768d473deb Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Fri, 22 Apr 2011 12:02:05 -0700
Subject: gpio/omap: debounce remove SoC specific registers, use pdata

Use register offsets passed in from pdata for accessing debounce registers.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/gpio.c             |  4 ++++
 arch/arm/plat-omap/include/plat/gpio.h |  2 ++
 drivers/gpio/gpio-omap.c               | 15 +++------------
 3 files changed, 9 insertions(+), 12 deletions(-)

(limited to 'drivers/gpio')

diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index cc26677a12f8..316d930651f1 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -81,6 +81,8 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
 		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
 		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
+		pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
+		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
 		break;
 	case 2:
 		pdata->bank_type = METHOD_GPIO_44XX;
@@ -94,6 +96,8 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
 		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
 		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
+		pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
+		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
 		break;
 	default:
 		WARN(1, "Invalid gpio bank_type\n");
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index c7e3a56340c0..7a3f067ee532 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -185,6 +185,8 @@ struct omap_gpio_reg_offs {
 	u16 irqenable;
 	u16 set_irqenable;
 	u16 clr_irqenable;
+	u16 debounce;
+	u16 debounce_en;
 
 	bool irqenable_inv;
 };
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index dbe0cf36e909..f212d236f908 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -168,7 +168,7 @@ do {	\
 static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 		unsigned debounce)
 {
-	void __iomem		*reg = bank->base;
+	void __iomem		*reg;
 	u32			val;
 	u32			l;
 
@@ -184,19 +184,10 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 
 	l = GPIO_BIT(bank, gpio);
 
-	if (bank->method == METHOD_GPIO_44XX)
-		reg += OMAP4_GPIO_DEBOUNCINGTIME;
-	else
-		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-
+	reg = bank->base + bank->regs->debounce;
 	__raw_writel(debounce, reg);
 
-	reg = bank->base;
-	if (bank->method == METHOD_GPIO_44XX)
-		reg += OMAP4_GPIO_DEBOUNCENABLE;
-	else
-		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-
+	reg = bank->base + bank->regs->debounce_en;
 	val = __raw_readl(reg);
 
 	if (debounce) {
-- 
cgit v1.2.3-59-g8ed1b


From e5ff4440cf5206fbb99d9a354ed9024eb3da047d Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@ti.com>
Date: Fri, 22 Apr 2011 14:37:16 -0700
Subject: gpio/omap: cleanup show revision, remove cpu_is checks, display only
 once

Remove cpu_is_* checks from gpio_show_revision() by passing in the
revision address offset from platform data.  SoCs with no revision
register (15xx, 7xx, and all MPUIOs) use -1 (actually, USHRT_MAX) to
signify no register.

While here, all GPIO banks are assumed to be the same revision, so fix
show_revision() to only show the revision for the first bank it finds.
This removes duplicate GPIO revision prints during boot.

Thanks to Charulatha V <charu@ti.com> for finding/fixing a few -1s
that were missed in the original patch.

Signed-off-by: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap1/gpio15xx.c         |  2 ++
 arch/arm/mach-omap1/gpio16xx.c         |  2 ++
 arch/arm/mach-omap1/gpio7xx.c          |  2 ++
 arch/arm/mach-omap2/gpio.c             |  2 ++
 arch/arm/plat-omap/include/plat/gpio.h |  1 +
 drivers/gpio/gpio-omap.c               | 14 ++++++--------
 6 files changed, 15 insertions(+), 8 deletions(-)

(limited to 'drivers/gpio')

diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 91756245e860..f79c6aef11af 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -35,6 +35,7 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
 };
 
 static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
+	.revision       = USHRT_MAX,
 	.direction	= OMAP_MPUIO_IO_CNTL,
 	.datain		= OMAP_MPUIO_INPUT_LATCH,
 	.dataout	= OMAP_MPUIO_OUTPUT,
@@ -75,6 +76,7 @@ static struct __initdata resource omap15xx_gpio_resources[] = {
 };
 
 static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
+	.revision	= USHRT_MAX,
 	.direction	= OMAP1510_GPIO_DIR_CONTROL,
 	.datain		= OMAP1510_GPIO_DATA_INPUT,
 	.dataout	= OMAP1510_GPIO_DATA_OUTPUT,
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index a6d4a71ea4af..c69b3b104286 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -38,6 +38,7 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
 };
 
 static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
+	.revision       = USHRT_MAX,
 	.direction	= OMAP_MPUIO_IO_CNTL,
 	.datain		= OMAP_MPUIO_INPUT_LATCH,
 	.dataout	= OMAP_MPUIO_OUTPUT,
@@ -78,6 +79,7 @@ static struct __initdata resource omap16xx_gpio1_resources[] = {
 };
 
 static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
+	.revision       = OMAP1610_GPIO_REVISION,
 	.direction	= OMAP1610_GPIO_DIRECTION,
 	.set_dataout	= OMAP1610_GPIO_SET_DATAOUT,
 	.clr_dataout	= OMAP1610_GPIO_CLEAR_DATAOUT,
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 12bcd9f2864a..d7f2ad3e6ac7 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -40,6 +40,7 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
 };
 
 static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
+	.revision	= USHRT_MAX,
 	.direction	= OMAP_MPUIO_IO_CNTL / 2,
 	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
 	.dataout	= OMAP_MPUIO_OUTPUT / 2,
@@ -80,6 +81,7 @@ static struct __initdata resource omap7xx_gpio1_resources[] = {
 };
 
 static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
+	.revision	= USHRT_MAX,
 	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
 	.datain		= OMAP7XX_GPIO_DATA_INPUT,
 	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 316d930651f1..9a46d7773a48 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -71,6 +71,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	case 0:
 	case 1:
 		pdata->bank_type = METHOD_GPIO_24XX;
+		pdata->regs->revision = OMAP24XX_GPIO_REVISION;
 		pdata->regs->direction = OMAP24XX_GPIO_OE;
 		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
 		pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
@@ -86,6 +87,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 		break;
 	case 2:
 		pdata->bank_type = METHOD_GPIO_44XX;
+		pdata->regs->revision = OMAP4_GPIO_REVISION;
 		pdata->regs->direction = OMAP4_GPIO_OE;
 		pdata->regs->datain = OMAP4_GPIO_DATAIN;
 		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 7a3f067ee532..91e8de3db085 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -175,6 +175,7 @@ struct omap_gpio_dev_attr {
 };
 
 struct omap_gpio_reg_offs {
+	u16 revision;
 	u16 direction;
 	u16 datain;
 	u16 dataout;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index f212d236f908..501ca3d6a49e 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -984,19 +984,17 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 
 static void __init omap_gpio_show_rev(struct gpio_bank *bank)
 {
+	static bool called;
 	u32 rev;
 
-	if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
-		rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
-	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
-	else if (cpu_is_omap44xx())
-		rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
-	else
+	if (called || bank->regs->revision == USHRT_MAX)
 		return;
 
-	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+	rev = __raw_readw(bank->base + bank->regs->revision);
+	pr_info("OMAP GPIO hardware version %d.%d\n",
 		(rev >> 4) & 0x0f, rev & 0x0f);
+
+	called = true;
 }
 
 /* This lock class tells lockdep that GPIO irqs are in a different
-- 
cgit v1.2.3-59-g8ed1b