From cc15c7ebb424e45ba2c5ceecbe52d025219ee970 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Tue, 12 Apr 2011 15:34:38 -0400 Subject: hwmon: (sht15) add support for the status register * Add support for: - Heater. - End of battery notice. - Ability not to reload from OTP. - Low resolution (12bit temp, 8bit humidity). * Add an utility function to read individual bytes from the device. Signed-off-by: Vivien Didelot Acked-by: Jonathan Cameron Signed-off-by: Guenter Roeck --- drivers/hwmon/sht15.c | 247 +++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 214 insertions(+), 33 deletions(-) (limited to 'drivers/hwmon/sht15.c') diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 3182b3f578e2..49da089b5de9 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -1,6 +1,9 @@ /* * sht15.c - support for the SHT15 Temperature and Humidity Sensor * + * Portions Copyright (c) 2010-2011 Savoir-faire Linux Inc. + * Vivien Didelot + * * Copyright (c) 2009 Jonathan Cameron * * Copyright (c) 2007 Wouter Horre @@ -33,6 +36,8 @@ /* Commands */ #define SHT15_MEASURE_TEMP 0x03 #define SHT15_MEASURE_RH 0x05 +#define SHT15_WRITE_STATUS 0x06 +#define SHT15_READ_STATUS 0x07 #define SHT15_SOFT_RESET 0x1E /* Min timings */ @@ -41,6 +46,12 @@ #define SHT15_TSU 150 /* (nsecs) data setup time */ #define SHT15_TSRST 11 /* (msecs) soft reset time */ +/* Status Register Bits */ +#define SHT15_STATUS_LOW_RESOLUTION 0x01 +#define SHT15_STATUS_NO_OTP_RELOAD 0x02 +#define SHT15_STATUS_HEATER 0x04 +#define SHT15_STATUS_LOW_BATTERY 0x40 + /* Actions the driver may be doing */ enum sht15_state { SHT15_READING_NOTHING, @@ -74,9 +85,12 @@ static const struct sht15_temppair temppoints[] = { * @wait_queue: wait queue for getting values from device. * @val_temp: last temperature value read from device. * @val_humid: last humidity value read from device. + * @val_status: last status register value read from device. * @state: state identifying the action the driver is doing. * @measurements_valid: are the current stored measures valid (start condition). + * @status_valid: is the current stored status valid (start condition). * @last_measurement: time of last measure. + * @last_status: time of last status reading. * @read_lock: mutex to ensure only one read in progress at a time. * @dev: associate device structure. * @hwmon_dev: device associated with hwmon subsystem. @@ -97,9 +111,12 @@ struct sht15_data { wait_queue_head_t wait_queue; uint16_t val_temp; uint16_t val_humid; + u8 val_status; enum sht15_state state; bool measurements_valid; + bool status_valid; unsigned long last_measurement; + unsigned long last_status; struct mutex read_lock; struct device *dev; struct device *hwmon_dev; @@ -244,10 +261,105 @@ static int sht15_soft_reset(struct sht15_data *data) if (ret) return ret; msleep(SHT15_TSRST); + /* device resets default hardware status register value */ + data->val_status = 0; + + return ret; +} + +/** + * sht15_end_transmission() - notify device of end of transmission + * @data: device state. + * + * This is basically a NAK (single clock pulse, data high). + */ +static void sht15_end_transmission(struct sht15_data *data) +{ + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); +} + +/** + * sht15_read_byte() - Read a byte back from the device + * @data: device state. + */ +static u8 sht15_read_byte(struct sht15_data *data) +{ + int i; + u8 byte = 0; + + for (i = 0; i < 8; ++i) { + byte <<= 1; + gpio_set_value(data->pdata->gpio_sck, 1); + ndelay(SHT15_TSCKH); + byte |= !!gpio_get_value(data->pdata->gpio_data); + gpio_set_value(data->pdata->gpio_sck, 0); + ndelay(SHT15_TSCKL); + } + return byte; +} + +/** + * sht15_send_status() - write the status register byte + * @data: sht15 specific data. + * @status: the byte to set the status register with. + * + * As described in figure 14 and table 5 of the datasheet. + */ +static int sht15_send_status(struct sht15_data *data, u8 status) +{ + int ret; + + ret = sht15_send_cmd(data, SHT15_WRITE_STATUS); + if (ret) + return ret; + gpio_direction_output(data->pdata->gpio_data, 1); + ndelay(SHT15_TSU); + sht15_send_byte(data, status); + ret = sht15_wait_for_response(data); + if (ret) + return ret; + data->val_status = status; return 0; } +/** + * sht15_update_status() - get updated status register from device if too old + * @data: device instance specific data. + * + * As described in figure 15 and table 5 of the datasheet. + */ +static int sht15_update_status(struct sht15_data *data) +{ + int ret = 0; + u8 status; + int timeout = HZ; + + mutex_lock(&data->read_lock); + if (time_after(jiffies, data->last_status + timeout) + || !data->status_valid) { + ret = sht15_send_cmd(data, SHT15_READ_STATUS); + if (ret) + goto error_ret; + status = sht15_read_byte(data); + + sht15_end_transmission(data); + + data->val_status = status; + data->status_valid = true; + data->last_status = jiffies; + } +error_ret: + mutex_unlock(&data->read_lock); + + return ret; +} + /** * sht15_measurement() - get a new value from device * @data: device instance specific data @@ -324,6 +436,7 @@ error_ret: static inline int sht15_calc_temp(struct sht15_data *data) { int d1 = temppoints[0].d1; + int d2 = (data->val_status & SHT15_STATUS_LOW_RESOLUTION) ? 40 : 10; int i; for (i = ARRAY_SIZE(temppoints) - 1; i > 0; i--) @@ -336,7 +449,7 @@ static inline int sht15_calc_temp(struct sht15_data *data) break; } - return data->val_temp * 10 + d1; + return data->val_temp * d2 + d1; } /** @@ -353,18 +466,85 @@ static inline int sht15_calc_humid(struct sht15_data *data) { int rh_linear; /* milli percent */ int temp = sht15_calc_temp(data); - + int c2, c3; + int t2; const int c1 = -4; - const int c2 = 40500; /* x 10 ^ -6 */ - const int c3 = -28; /* x 10 ^ -7 */ + + if (data->val_status & SHT15_STATUS_LOW_RESOLUTION) { + c2 = 648000; /* x 10 ^ -6 */ + c3 = -7200; /* x 10 ^ -7 */ + t2 = 1280; + } else { + c2 = 40500; /* x 10 ^ -6 */ + c3 = -28; /* x 10 ^ -7 */ + t2 = 80; + } rh_linear = c1 * 1000 + c2 * data->val_humid / 1000 + (data->val_humid * data->val_humid * c3) / 10000; - return (temp - 25000) * (10000 + 80 * data->val_humid) + return (temp - 25000) * (10000 + t2 * data->val_humid) / 1000000 + rh_linear; } +/** + * sht15_show_status() - show status information in sysfs + * @dev: device. + * @attr: device attribute. + * @buf: sysfs buffer where information is written to. + * + * Will be called on read access to temp1_fault, humidity1_fault + * and heater_enable sysfs attributes. + * Returns number of bytes written into buffer, negative errno on error. + */ +static ssize_t sht15_show_status(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + struct sht15_data *data = dev_get_drvdata(dev); + u8 bit = to_sensor_dev_attr(attr)->index; + + ret = sht15_update_status(data); + + return ret ? ret : sprintf(buf, "%d\n", !!(data->val_status & bit)); +} + +/** + * sht15_store_heater() - change heater state via sysfs + * @dev: device. + * @attr: device attribute. + * @buf: sysfs buffer to read the new heater state from. + * @count: length of the data. + * + * Will be called on read access to heater_enable sysfs attribute. + * Returns number of bytes actually decoded, negative errno on error. + */ +static ssize_t sht15_store_heater(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + struct sht15_data *data = dev_get_drvdata(dev); + long value; + u8 status; + + if (strict_strtol(buf, 10, &value)) + return -EINVAL; + + mutex_lock(&data->read_lock); + status = data->val_status & 0x07; + if (!!value) + status |= SHT15_STATUS_HEATER; + else + status &= ~SHT15_STATUS_HEATER; + + ret = sht15_send_status(data, status); + mutex_unlock(&data->read_lock); + + return ret ? ret : count; +} + /** * sht15_show_temp() - show temperature measurement value in sysfs * @dev: device. @@ -407,7 +587,6 @@ static ssize_t sht15_show_humidity(struct device *dev, ret = sht15_update_measurements(data); return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data)); - } static ssize_t show_name(struct device *dev, @@ -422,10 +601,19 @@ static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sht15_show_temp, NULL, 0); static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO, sht15_show_humidity, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, sht15_show_status, NULL, + SHT15_STATUS_LOW_BATTERY); +static SENSOR_DEVICE_ATTR(humidity1_fault, S_IRUGO, sht15_show_status, NULL, + SHT15_STATUS_LOW_BATTERY); +static SENSOR_DEVICE_ATTR(heater_enable, S_IRUGO | S_IWUSR, sht15_show_status, + sht15_store_heater, SHT15_STATUS_HEATER); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); static struct attribute *sht15_attrs[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_humidity1_input.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_humidity1_fault.dev_attr.attr, + &sensor_dev_attr_heater_enable.dev_attr.attr, &dev_attr_name.attr, NULL, }; @@ -466,25 +654,8 @@ static void sht15_ack(struct sht15_data *data) gpio_direction_input(data->pdata->gpio_data); } -/** - * sht15_end_transmission() - notify device of end of transmission - * @data: device state - * - * This is basically a NAK. (single clock pulse, data high) - */ -static void sht15_end_transmission(struct sht15_data *data) -{ - gpio_direction_output(data->pdata->gpio_data, 1); - ndelay(SHT15_TSU); - gpio_set_value(data->pdata->gpio_sck, 1); - ndelay(SHT15_TSCKH); - gpio_set_value(data->pdata->gpio_sck, 0); - ndelay(SHT15_TSCKL); -} - static void sht15_bh_read_data(struct work_struct *work_s) { - int i; uint16_t val = 0; struct sht15_data *data = container_of(work_s, struct sht15_data, @@ -505,16 +676,10 @@ static void sht15_bh_read_data(struct work_struct *work_s) } /* Read the data back from the device */ - for (i = 0; i < 16; ++i) { - val <<= 1; - gpio_set_value(data->pdata->gpio_sck, 1); - ndelay(SHT15_TSCKH); - val |= !!gpio_get_value(data->pdata->gpio_data); - gpio_set_value(data->pdata->gpio_sck, 0); - ndelay(SHT15_TSCKL); - if (i == 7) - sht15_ack(data); - } + val = sht15_read_byte(data); + val <<= 8; + sht15_ack(data); + val |= sht15_read_byte(data); /* Tell the device we are done */ sht15_end_transmission(data); @@ -568,6 +733,7 @@ static int __devinit sht15_probe(struct platform_device *pdev) { int ret = 0; struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL); + u8 status = 0; if (!data) { ret = -ENOMEM; @@ -588,6 +754,10 @@ static int __devinit sht15_probe(struct platform_device *pdev) } data->pdata = pdev->dev.platform_data; data->supply_uV = data->pdata->supply_mv * 1000; + if (data->pdata->no_otp_reload) + status |= SHT15_STATUS_NO_OTP_RELOAD; + if (data->pdata->low_resolution) + status |= SHT15_STATUS_LOW_RESOLUTION; /* * If a regulator is available, @@ -646,6 +816,13 @@ static int __devinit sht15_probe(struct platform_device *pdev) if (ret) goto err_release_irq; + /* write status with platform data options */ + if (status) { + ret = sht15_send_status(data, status); + if (ret) + goto err_release_irq; + } + ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group); if (ret) { dev_err(&pdev->dev, "sysfs create failed\n"); @@ -689,6 +866,10 @@ static int __devexit sht15_remove(struct platform_device *pdev) * prevent new ones beginning */ mutex_lock(&data->read_lock); + if (sht15_soft_reset(data)) { + mutex_unlock(&data->read_lock); + return -EFAULT; + } hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group); if (!IS_ERR(data->reg)) { -- cgit v1.2.3-59-g8ed1b