From 2507abb3a7a89fa496769f2a224585e77f5fb195 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 6 Feb 2013 20:49:12 -0800 Subject: hwmon: (pmbus/lm25066) Clamp limit attributes Limits on all supported sensors and chips have to be within 0..0x0fff, and limits are always positive. Clamp written values in chip driver. Also clear value cache to ensure that the actually written value is read back and reported correctly. Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/lm25066.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c index 5489d70015c2..f9f0c93e4a3d 100644 --- a/drivers/hwmon/pmbus/lm25066.c +++ b/drivers/hwmon/pmbus/lm25066.c @@ -123,15 +123,28 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, int ret; switch (reg) { + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff); + ret = pmbus_write_word_data(client, 0, reg, word); + pmbus_clear_cache(client); + break; case PMBUS_IIN_OC_WARN_LIMIT: + word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff); ret = pmbus_write_word_data(client, 0, LM25066_MFR_IIN_OC_WARN_LIMIT, word); + pmbus_clear_cache(client); break; case PMBUS_PIN_OP_WARN_LIMIT: + word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff); ret = pmbus_write_word_data(client, 0, LM25066_MFR_PIN_OP_WARN_LIMIT, word); + pmbus_clear_cache(client); break; case PMBUS_VIRT_RESET_PIN_HISTORY: ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK); -- cgit v1.2.3-59-g8ed1b