From 8c1d04192e2ef1e6d38e9d5e9c500e5330d20339 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 5 Jul 2011 13:31:48 -0700 Subject: hwmon: (lm95241) Add support for LM95231 LM95231 is fully compatible to LM95241; only necessary change is to add chip detection. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/Kconfig | 5 +++-- drivers/hwmon/lm95241.c | 31 +++++++++++++++++++------------ 2 files changed, 22 insertions(+), 14 deletions(-) (limited to 'drivers/hwmon') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 166889b326ff..38c2adba8381 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -694,10 +694,11 @@ config SENSORS_LTC4261 be called ltc4261. config SENSORS_LM95241 - tristate "National Semiconductor LM95241 sensor chip" + tristate "National Semiconductor LM95241 and compatibles" depends on I2C help - If you say yes here you get support for LM95241 sensor chip. + If you say yes here you get support for LM95231 and LM95241 sensor + chips. This driver can also be built as a module. If so, the module will be called lm95241. diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index d3b464b74ced..513901d592a9 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -74,8 +74,9 @@ static const unsigned short normal_i2c[] = { #define TT_OFF 0 #define TT_ON 1 #define TT_MASK 7 -#define MANUFACTURER_ID 0x01 -#define DEFAULT_REVISION 0xA4 +#define NATSEMI_MAN_ID 0x01 +#define LM95231_CHIP_ID 0xA1 +#define LM95241_CHIP_ID 0xA4 static const u8 lm95241_reg_address[] = { LM95241_REG_R_LOCAL_TEMPH, @@ -338,20 +339,25 @@ static int lm95241_detect(struct i2c_client *new_client, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; - int address = new_client->addr; const char *name; + int mfg_id, chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) - == MANUFACTURER_ID) - && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) - == DEFAULT_REVISION)) { - name = DEVNAME; - } else { - dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n", - address); + mfg_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID); + if (mfg_id != NATSEMI_MAN_ID) + return -ENODEV; + + chip_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID); + switch (chip_id) { + case LM95231_CHIP_ID: + name = "lm95231"; + break; + case LM95241_CHIP_ID: + name = "lm95241"; + break; + default: return -ENODEV; } @@ -431,7 +437,8 @@ static int lm95241_remove(struct i2c_client *client) /* Driver data (common to all clients) */ static const struct i2c_device_id lm95241_id[] = { - { DEVNAME, 0 }, + { "lm95231", 0 }, + { "lm95241", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, lm95241_id); -- cgit v1.2.3-59-g8ed1b