From fab97220c9e409a98b1956ba677ddd2dd43b0b95 Mon Sep 17 00:00:00 2001
From: Heiko J Schick <schickhj.ibm.com>
Date: Fri, 22 Sep 2006 15:22:22 -0700
Subject: IB/ehca: Add driver for IBM eHCA InfiniBand adapters

Add a driver for IBM GX bus InfiniBand adapters, which are usable with
some pSeries/System p systems.

Signed-off-by: Heiko J Schick <schickhj.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/ehca/ehca_sqp.c | 111 ++++++++++++++++++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 drivers/infiniband/hw/ehca/ehca_sqp.c

(limited to 'drivers/infiniband/hw/ehca/ehca_sqp.c')

diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c
new file mode 100644
index 000000000000..9f16e9c79394
--- /dev/null
+++ b/drivers/infiniband/hw/ehca/ehca_sqp.c
@@ -0,0 +1,111 @@
+/*
+ *  IBM eServer eHCA Infiniband device driver for Linux on POWER
+ *
+ *  SQP functions
+ *
+ *  Authors: Khadija Souissi <souissi@de.ibm.com>
+ *           Heiko J Schick <schickhj@de.ibm.com>
+ *
+ *  Copyright (c) 2005 IBM Corporation
+ *
+ *  All rights reserved.
+ *
+ *  This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ *  BSD.
+ *
+ * OpenIB BSD License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include "ehca_classes.h"
+#include "ehca_tools.h"
+#include "ehca_qes.h"
+#include "ehca_iverbs.h"
+#include "hcp_if.h"
+
+
+/**
+ * ehca_define_sqp - Defines special queue pair 1 (GSI QP). When special queue
+ * pair is created successfully, the corresponding port gets active.
+ *
+ * Define Special Queue pair 0 (SMI QP) is still not supported.
+ *
+ * @qp_init_attr: Queue pair init attributes with port and queue pair type
+ */
+
+u64 ehca_define_sqp(struct ehca_shca *shca,
+		    struct ehca_qp *ehca_qp,
+		    struct ib_qp_init_attr *qp_init_attr)
+{
+	u32 pma_qp_nr, bma_qp_nr;
+	u64 ret;
+	u8 port = qp_init_attr->port_num;
+	int counter;
+
+	shca->sport[port - 1].port_state = IB_PORT_DOWN;
+
+	switch (qp_init_attr->qp_type) {
+	case IB_QPT_SMI:
+		/* function not supported yet */
+		break;
+	case IB_QPT_GSI:
+		ret = hipz_h_define_aqp1(shca->ipz_hca_handle,
+					 ehca_qp->ipz_qp_handle,
+					 ehca_qp->galpas.kernel,
+					 (u32) qp_init_attr->port_num,
+					 &pma_qp_nr, &bma_qp_nr);
+
+		if (ret != H_SUCCESS) {
+			ehca_err(&shca->ib_device,
+				 "Can't define AQP1 for port %x. rc=%lx",
+				 port, ret);
+			return ret;
+		}
+		break;
+	default:
+		ehca_err(&shca->ib_device, "invalid qp_type=%x",
+			 qp_init_attr->qp_type);
+		return H_PARAMETER;
+	}
+
+	for (counter = 0;
+	     shca->sport[port - 1].port_state != IB_PORT_ACTIVE &&
+		     counter < ehca_port_act_time;
+	     counter++) {
+		ehca_dbg(&shca->ib_device, "... wait until port %x is active",
+			 port);
+		msleep_interruptible(1000);
+	}
+
+	if (counter == ehca_port_act_time) {
+		ehca_err(&shca->ib_device, "Port %x is not active.", port);
+		return H_HARDWARE;
+	}
+
+	return H_SUCCESS;
+}
-- 
cgit v1.2.3-59-g8ed1b