From 8a407835bef6d47dcef9594d8c85900f994fbedf Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:53:33 +0900 Subject: ARM: S3C24XX: move irq driver to drivers/irqchip This move is necessary to make use of the irqchip infrastructure for the following devicetree support for s3c24xx architectures. Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-s3c24xx.c | 1107 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 1108 insertions(+) create mode 100644 drivers/irqchip/irq-s3c24xx.c (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 98e3b87bdf1b..4d65a21eb9b8 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o +obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_METAG) += irq-metag-ext.o obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c new file mode 100644 index 000000000000..5c9f8b7a1fd6 --- /dev/null +++ b/drivers/irqchip/irq-s3c24xx.c @@ -0,0 +1,1107 @@ +/* + * S3C24XX IRQ handling + * + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * Copyright (c) 2012 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include +#include + +#define S3C_IRQTYPE_NONE 0 +#define S3C_IRQTYPE_EINT 1 +#define S3C_IRQTYPE_EDGE 2 +#define S3C_IRQTYPE_LEVEL 3 + +struct s3c_irq_data { + unsigned int type; + unsigned long parent_irq; + + /* data gets filled during init */ + struct s3c_irq_intc *intc; + unsigned long sub_bits; + struct s3c_irq_intc *sub_intc; +}; + +/* + * Sructure holding the controller data + * @reg_pending register holding pending irqs + * @reg_intpnd special register intpnd in main intc + * @reg_mask mask register + * @domain irq_domain of the controller + * @parent parent controller for ext and sub irqs + * @irqs irq-data, always s3c_irq_data[32] + */ +struct s3c_irq_intc { + void __iomem *reg_pending; + void __iomem *reg_intpnd; + void __iomem *reg_mask; + struct irq_domain *domain; + struct s3c_irq_intc *parent; + struct s3c_irq_data *irqs; +}; + +static void s3c_irq_mask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + struct s3c_irq_data *parent_data; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask |= (1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc) { + parent_data = &parent_intc->irqs[irq_data->parent_irq]; + + /* check to see if we need to mask the parent IRQ */ + if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_mask(irq_get_irq_data(irqno)); + } + } +} + +static void s3c_irq_unmask(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; + unsigned long mask; + unsigned int irqno; + + mask = __raw_readl(intc->reg_mask); + mask &= ~(1UL << data->hwirq); + __raw_writel(mask, intc->reg_mask); + + if (parent_intc) { + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + s3c_irq_unmask(irq_get_irq_data(irqno)); + } +} + +static inline void s3c_irq_ack(struct irq_data *data) +{ + struct s3c_irq_intc *intc = data->domain->host_data; + unsigned long bitval = 1UL << data->hwirq; + + __raw_writel(bitval, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(bitval, intc->reg_intpnd); +} + +static int s3c_irqext_type_set(void __iomem *gpcon_reg, + void __iomem *extint_reg, + unsigned long gpcon_offset, + unsigned long extint_offset, + unsigned int type) +{ + unsigned long newvalue = 0, value; + + /* Set the GPIO to external interrupt mode */ + value = __raw_readl(gpcon_reg); + value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset); + __raw_writel(value, gpcon_reg); + + /* Set the external interrupt to pointed trigger type */ + switch (type) + { + case IRQ_TYPE_NONE: + pr_warn("No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + value = __raw_readl(extint_reg); + value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset); + __raw_writel(value, extint_reg); + + return 0; +} + +static int s3c_irqext_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 4) && (data->hwirq <= 7)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT1; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 8) * 4; + } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) { + gpcon_reg = S3C2410_GPGCON; + extint_reg = S3C24XX_EXTINT2; + gpcon_offset = (data->hwirq - 8) * 2; + extint_offset = (data->hwirq - 16) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +static int s3c_irqext0_type(struct irq_data *data, unsigned int type) +{ + void __iomem *extint_reg; + void __iomem *gpcon_reg; + unsigned long gpcon_offset, extint_offset; + + if ((data->hwirq >= 0) && (data->hwirq <= 3)) { + gpcon_reg = S3C2410_GPFCON; + extint_reg = S3C24XX_EXTINT0; + gpcon_offset = (data->hwirq) * 2; + extint_offset = (data->hwirq) * 4; + } else { + return -EINVAL; + } + + return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset, + extint_offset, type); +} + +static struct irq_chip s3c_irq_chip = { + .name = "s3c", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake +}; + +static struct irq_chip s3c_irq_level_chip = { + .name = "s3c-level", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, +}; + +static struct irq_chip s3c_irqext_chip = { + .name = "s3c-ext", + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irqext_type, + .irq_set_wake = s3c_irqext_wake +}; + +static struct irq_chip s3c_irq_eint0t4 = { + .name = "s3c-ext0", + .irq_ack = s3c_irq_ack, + .irq_mask = s3c_irq_mask, + .irq_unmask = s3c_irq_unmask, + .irq_set_wake = s3c_irq_wake, + .irq_set_type = s3c_irqext0_type, +}; + +static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_intc *sub_intc = irq_data->sub_intc; + unsigned long src; + unsigned long msk; + unsigned int n; + + chained_irq_enter(chip, desc); + + src = __raw_readl(sub_intc->reg_pending); + msk = __raw_readl(sub_intc->reg_mask); + + src &= ~msk; + src &= irq_data->sub_bits; + + while (src) { + n = __ffs(src); + src &= ~(1 << n); + generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + } + + chained_irq_exit(chip, desc); +} + +static struct s3c_irq_intc *main_intc; +static struct s3c_irq_intc *main_intc2; + +static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, + struct pt_regs *regs) +{ + int pnd; + int offset; + int irq; + + pnd = __raw_readl(intc->reg_intpnd); + if (!pnd) + return false; + + /* We have a problem that the INTOFFSET register does not always + * show one interrupt. Occasionally we get two interrupts through + * the prioritiser, and this causes the INTOFFSET register to show + * what looks like the logical-or of the two interrupt numbers. + * + * Thanks to Klaus, Shannon, et al for helping to debug this problem + */ + offset = __raw_readl(intc->reg_intpnd + 4); + + /* Find the bit manually, when the offset is wrong. + * The pending register only ever contains the one bit of the next + * interrupt to handle. + */ + if (!(pnd & (1 << offset))) + offset = __ffs(pnd); + + irq = irq_find_mapping(intc->domain, offset); + handle_IRQ(irq, regs); + return true; +} + +asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) +{ + do { + if (likely(main_intc)) + if (s3c24xx_handle_intc(main_intc, regs)) + continue; + + if (main_intc2) + if (s3c24xx_handle_intc(main_intc2, regs)) + continue; + + break; + } while (1); +} + +#ifdef CONFIG_FIQ +/** + * s3c24xx_set_fiq - set the FIQ routing + * @irq: IRQ number to route to FIQ on processor. + * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing. + * + * Change the state of the IRQ to FIQ routing depending on @irq and @on. If + * @on is true, the @irq is checked to see if it can be routed and the + * interrupt controller updated to route the IRQ. If @on is false, the FIQ + * routing is cleared, regardless of which @irq is specified. + */ +int s3c24xx_set_fiq(unsigned int irq, bool on) +{ + u32 intmod; + unsigned offs; + + if (on) { + offs = irq - FIQ_START; + if (offs > 31) + return -EINVAL; + + intmod = 1 << offs; + } else { + intmod = 0; + } + + __raw_writel(intmod, S3C2410_INTMOD); + return 0; +} + +EXPORT_SYMBOL_GPL(s3c24xx_set_fiq); +#endif + +static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct s3c_irq_intc *intc = h->host_data; + struct s3c_irq_data *irq_data = &intc->irqs[hw]; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *parent_irq_data; + unsigned int irqno; + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + + parent_intc = intc->parent; + + /* set handler and flags */ + switch (irq_data->type) { + case S3C_IRQTYPE_NONE: + return 0; + case S3C_IRQTYPE_EINT: + /* On the S3C2412, the EINT0to3 have a parent irq + * but need the s3c_irq_eint0t4 chip + */ + if (parent_intc && (!soc_is_s3c2412() || hw >= 4)) + irq_set_chip_and_handler(virq, &s3c_irqext_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_eint0t4, + handle_edge_irq); + break; + case S3C_IRQTYPE_EDGE: + if (parent_intc || intc->reg_pending == S3C2416_SRCPND2) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_edge_irq); + break; + case S3C_IRQTYPE_LEVEL: + if (parent_intc) + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_level_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_chip, + handle_level_irq); + break; + default: + pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); + return -EINVAL; + } + set_irq_flags(virq, IRQF_VALID); + + if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { + if (irq_data->parent_irq > 31) { + pr_err("irq-s3c24xx: parent irq %lu is out of range\n", + irq_data->parent_irq); + goto err; + } + + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << hw); + + /* attach the demuxer to the parent irq */ + irqno = irq_find_mapping(parent_intc->domain, + irq_data->parent_irq); + if (!irqno) { + pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n", + irq_data->parent_irq); + goto err; + } + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; + +err: + set_irq_flags(virq, 0); + + /* the only error can result from bad mapping data*/ + return -EINVAL; +} + +static struct irq_domain_ops s3c24xx_irq_ops = { + .map = s3c24xx_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +static void s3c24xx_clear_intc(struct s3c_irq_intc *intc) +{ + void __iomem *reg_source; + unsigned long pend; + unsigned long last; + int i; + + /* if intpnd is set, read the next pending irq from there */ + reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending; + + last = 0; + for (i = 0; i < 4; i++) { + pend = __raw_readl(reg_source); + + if (pend == 0 || pend == last) + break; + + __raw_writel(pend, intc->reg_pending); + if (intc->reg_intpnd) + __raw_writel(pend, intc->reg_intpnd); + + pr_info("irq: clearing pending status %08x\n", (int)pend); + last = pend; + } +} + +static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, + struct s3c_irq_data *irq_data, + struct s3c_irq_intc *parent, + unsigned long address) +{ + struct s3c_irq_intc *intc; + void __iomem *base = (void *)0xf6000000; /* static mapping */ + int irq_num; + int irq_start; + int ret; + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return ERR_PTR(-ENOMEM); + + intc->irqs = irq_data; + + if (parent) + intc->parent = parent; + + /* select the correct data for the controller. + * Need to hard code the irq num start and offset + * to preserve the static mapping for now + */ + switch (address) { + case 0x4a000000: + pr_debug("irq: found main intc\n"); + intc->reg_pending = base; + intc->reg_mask = base + 0x08; + intc->reg_intpnd = base + 0x10; + irq_num = 32; + irq_start = S3C2410_IRQ(0); + break; + case 0x4a000018: + pr_debug("irq: found subintc\n"); + intc->reg_pending = base + 0x18; + intc->reg_mask = base + 0x1c; + irq_num = 29; + irq_start = S3C2410_IRQSUB(0); + break; + case 0x4a000040: + pr_debug("irq: found intc2\n"); + intc->reg_pending = base + 0x40; + intc->reg_mask = base + 0x48; + intc->reg_intpnd = base + 0x50; + irq_num = 8; + irq_start = S3C2416_IRQ(0); + break; + case 0x560000a4: + pr_debug("irq: found eintc\n"); + base = (void *)0xfd000000; + + intc->reg_mask = base + 0xa4; + intc->reg_pending = base + 0x08; + irq_num = 24; + irq_start = S3C2410_IRQ(32); + break; + default: + pr_err("irq: unsupported controller address\n"); + ret = -EINVAL; + goto err; + } + + /* now that all the data is complete, init the irq-domain */ + s3c24xx_clear_intc(intc); + intc->domain = irq_domain_add_legacy(np, irq_num, irq_start, + 0, &s3c24xx_irq_ops, + intc); + if (!intc->domain) { + pr_err("irq: could not create irq-domain\n"); + ret = -EINVAL; + goto err; + } + + if (address == 0x4a000000) + main_intc = intc; + else if (address == 0x4a000040) + main_intc2 = intc; + + set_handle_irq(s3c24xx_handle_irq); + + return intc; + +err: + kfree(intc); + return ERR_PTR(ret); +} + +static struct s3c_irq_data init_eint[32] = { + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; + +#ifdef CONFIG_CPU_S3C2410 +static struct s3c_irq_data init_s3c2410base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2410subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ +}; + +void __init s3c2410_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_s3c2410subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c_irq_data init_s3c2412base[32] = { + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2412eint[32] = { + { .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */ + { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */ +}; + +static struct s3c_irq_data init_s3c2412subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */ +}; + +void s3c2412_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2412: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_s3c2412eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018); +} +#endif + +#ifdef CONFIG_CPU_S3C2416 +static struct s3c_irq_data init_s3c2416base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_NONE, }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_NONE, }, + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2416subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +static struct s3c_irq_data init_s3c2416_second[32] = { + { .type = S3C_IRQTYPE_EDGE }, /* 2D */ + { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ + { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ + { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ +}; + +void __init s3c2416_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2416: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + + s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); +} + +#endif + +#ifdef CONFIG_CPU_S3C2440 +static struct s3c_irq_data init_s3c2440base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2440subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2440_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2440: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018); +} +#endif + +#ifdef CONFIG_CPU_S3C2442 +static struct s3c_irq_data init_s3c2442base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_EDGE, }, /* WDT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* LCD */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + +static struct s3c_irq_data init_s3c2442subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ +}; + +void __init s3c2442_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2442: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +static struct s3c_irq_data init_s3c2443base[32] = { + { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */ + { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */ + { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */ + { .type = S3C_IRQTYPE_EDGE, }, /* TICK */ + { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */ + { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */ + { .type = S3C_IRQTYPE_EDGE, }, /* CFON */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* NAND */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBD */ + { .type = S3C_IRQTYPE_EDGE, }, /* USBH */ + { .type = S3C_IRQTYPE_EDGE, }, /* IIC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */ + { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */ + { .type = S3C_IRQTYPE_EDGE, }, /* RTC */ + { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */ +}; + + +static struct s3c_irq_data init_s3c2443subint[32] = { + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ + { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ +}; + +void __init s3c2443_init_irq(void) +{ + struct s3c_irq_intc *main_intc; + + pr_info("S3C2443: IRQ Support\n"); + +#ifdef CONFIG_FIQ + init_FIQ(FIQ_START); +#endif + + main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); + if (IS_ERR(main_intc)) { + pr_err("irq: could not create main interrupt controller\n"); + return; + } + + s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); +} +#endif -- cgit v1.2.3-59-g8ed1b From e2714f79edb8ed4f9afd09ca48bf2abaa994b1c1 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:53:37 +0900 Subject: irqchip: s3c24xx: fix comments on some camera interrupts Might be confusing for people to read the code without having the datasheet nearby. Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- drivers/irqchip/irq-s3c24xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c index 5c9f8b7a1fd6..84afbc16fcc3 100644 --- a/drivers/irqchip/irq-s3c24xx.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -916,8 +916,8 @@ static struct s3c_irq_data init_s3c2440subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */ { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */ }; @@ -991,8 +991,8 @@ static struct s3c_irq_data init_s3c2442subint[32] = { { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */ { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* TC */ - { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* ADC */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */ + { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */ }; void __init s3c2442_init_irq(void) -- cgit v1.2.3-59-g8ed1b From 1ebc7e83b1cc58edae3f371ac9cf1614e0d3b345 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:53:41 +0900 Subject: irqchip: s3c24xx: fix irqlist of second s3c2416 controller The list in used was from the s3c2450, a close cousin of the s3c2416. As it's not possible to distinguish between the s3c2416 and s3c2450 the additional interrupts of the s3c2450 will only be available thru devicetree later. Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- drivers/irqchip/irq-s3c24xx.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c index 84afbc16fcc3..a565eb8def30 100644 --- a/drivers/irqchip/irq-s3c24xx.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -835,13 +835,12 @@ static struct s3c_irq_data init_s3c2416subint[32] = { static struct s3c_irq_data init_s3c2416_second[32] = { { .type = S3C_IRQTYPE_EDGE }, /* 2D */ - { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */ - { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */ + { .type = S3C_IRQTYPE_NONE }, /* reserved */ { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */ - { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */ }; void __init s3c2416_init_irq(void) -- cgit v1.2.3-59-g8ed1b From bd7c0da2c1590ea292052b873f93d2c1dbbf7d28 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:53:45 +0900 Subject: irqchip: s3c24xx: add irq_set_type callback for basic interrupt types Enables post-init setting of the desired typehandler for the interrupt. Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- drivers/irqchip/irq-s3c24xx.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c index a565eb8def30..7cba4f0090f2 100644 --- a/drivers/irqchip/irq-s3c24xx.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -123,6 +123,28 @@ static inline void s3c_irq_ack(struct irq_data *data) __raw_writel(bitval, intc->reg_intpnd); } +static int s3c_irq_type(struct irq_data *data, unsigned int type) +{ + switch (type) { + case IRQ_TYPE_NONE: + break; + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + irq_set_handler(data->irq, handle_edge_irq); + break; + case IRQ_TYPE_LEVEL_LOW: + case IRQ_TYPE_LEVEL_HIGH: + irq_set_handler(data->irq, handle_level_irq); + break; + default: + pr_err("No such irq type %d", type); + return -EINVAL; + } + + return 0; +} + static int s3c_irqext_type_set(void __iomem *gpcon_reg, void __iomem *extint_reg, unsigned long gpcon_offset, @@ -228,6 +250,7 @@ static struct irq_chip s3c_irq_chip = { .irq_ack = s3c_irq_ack, .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, + .irq_set_type = s3c_irq_type, .irq_set_wake = s3c_irq_wake }; @@ -236,6 +259,7 @@ static struct irq_chip s3c_irq_level_chip = { .irq_mask = s3c_irq_mask, .irq_unmask = s3c_irq_unmask, .irq_ack = s3c_irq_ack, + .irq_set_type = s3c_irq_type, }; static struct irq_chip s3c_irqext_chip = { -- cgit v1.2.3-59-g8ed1b From 658dc8fb9cbc7712b1518ce79211ffadcabd1c9e Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:53:49 +0900 Subject: irqchip: s3c24xx: globally keep track of the created intc instances For dt-enabled machines we want to use a big irq_domain over all controllers and therefore need to access not only the main controllers but the sub-controller as well. Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- drivers/irqchip/irq-s3c24xx.c | 99 ++++++++++++++++++++++--------------------- 1 file changed, 50 insertions(+), 49 deletions(-) (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c index 7cba4f0090f2..9914abdb8214 100644 --- a/drivers/irqchip/irq-s3c24xx.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -69,6 +69,14 @@ struct s3c_irq_intc { struct s3c_irq_data *irqs; }; +/* + * Array holding pointers to the global controller structs + * [0] ... main_intc + * [1] ... sub_intc + * [2] ... main_intc2 on s3c2416 + */ +static struct s3c_irq_intc *s3c_intc[3]; + static void s3c_irq_mask(struct irq_data *data) { struct s3c_irq_intc *intc = data->domain->host_data; @@ -307,9 +315,6 @@ static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } -static struct s3c_irq_intc *main_intc; -static struct s3c_irq_intc *main_intc2; - static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, struct pt_regs *regs) { @@ -345,12 +350,12 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) { do { - if (likely(main_intc)) - if (s3c24xx_handle_intc(main_intc, regs)) + if (likely(s3c_intc[0])) + if (s3c24xx_handle_intc(s3c_intc[0], regs)) continue; - if (main_intc2) - if (s3c24xx_handle_intc(main_intc2, regs)) + if (s3c_intc[2]) + if (s3c24xx_handle_intc(s3c_intc[2], regs)) continue; break; @@ -577,11 +582,6 @@ static struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np, goto err; } - if (address == 0x4a000000) - main_intc = intc; - else if (address == 0x4a000040) - main_intc2 = intc; - set_handle_irq(s3c24xx_handle_irq); return intc; @@ -670,20 +670,20 @@ static struct s3c_irq_data init_s3c2410subint[32] = { void __init s3c2410_init_irq(void) { - struct s3c_irq_intc *main_intc; - #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_s3c2410subint[0], main_intc, 0x4a000018); - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0], + s3c_intc[0], 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); } #endif @@ -770,22 +770,22 @@ static struct s3c_irq_data init_s3c2412subint[32] = { void s3c2412_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2412: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_s3c2412eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2412subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0], + s3c_intc[0], 0x4a000018); } #endif @@ -869,24 +869,25 @@ static struct s3c_irq_data init_s3c2416_second[32] = { void __init s3c2416_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2416: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0], + s3c_intc[0], 0x4a000018); - s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040); + s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0], + NULL, 0x4a000040); } #endif @@ -947,22 +948,22 @@ static struct s3c_irq_data init_s3c2440subint[32] = { void __init s3c2440_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2440: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2440subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0], + s3c_intc[0], 0x4a000018); } #endif @@ -1020,22 +1021,22 @@ static struct s3c_irq_data init_s3c2442subint[32] = { void __init s3c2442_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2442: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2442subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0], + s3c_intc[0], 0x4a000018); } #endif @@ -1110,21 +1111,21 @@ static struct s3c_irq_data init_s3c2443subint[32] = { void __init s3c2443_init_irq(void) { - struct s3c_irq_intc *main_intc; - pr_info("S3C2443: IRQ Support\n"); #ifdef CONFIG_FIQ init_FIQ(FIQ_START); #endif - main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000); - if (IS_ERR(main_intc)) { + s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, + 0x4a000000); + if (IS_ERR(s3c_intc[0])) { pr_err("irq: could not create main interrupt controller\n"); return; } - s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4); - s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018); + s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4); + s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0], + s3c_intc[0], 0x4a000018); } #endif -- cgit v1.2.3-59-g8ed1b From f5a25524508e68ac670b28db9112d3962dca4703 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:53:52 +0900 Subject: irqchip: s3c24xx: make interrupt handling independent of irq_domain structure Keep a pointer to the corresponding s3c_irq_data struct as irq_chip_data. This removes the need to fetch the intc struct from the irq_domains host_data, thus making it independent of the underlying irq_domain structure. Also keep the real register offset of the interrupt in the s3c_irq_data struct to make it independent of the hwirq structure in the irq_domain Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- drivers/irqchip/irq-s3c24xx.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers/irqchip') diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c index 9914abdb8214..02b82db086d8 100644 --- a/drivers/irqchip/irq-s3c24xx.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -43,6 +43,7 @@ struct s3c_irq_data { unsigned int type; + unsigned long offset; unsigned long parent_irq; /* data gets filled during init */ @@ -79,15 +80,15 @@ static struct s3c_irq_intc *s3c_intc[3]; static void s3c_irq_mask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; struct s3c_irq_data *parent_data; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask |= (1UL << data->hwirq); + mask |= (1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); if (parent_intc) { @@ -104,14 +105,14 @@ static void s3c_irq_mask(struct irq_data *data) static void s3c_irq_unmask(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *parent_intc = intc->parent; - struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq]; unsigned long mask; unsigned int irqno; mask = __raw_readl(intc->reg_mask); - mask &= ~(1UL << data->hwirq); + mask &= ~(1UL << irq_data->offset); __raw_writel(mask, intc->reg_mask); if (parent_intc) { @@ -123,8 +124,9 @@ static void s3c_irq_unmask(struct irq_data *data) static inline void s3c_irq_ack(struct irq_data *data) { - struct s3c_irq_intc *intc = data->domain->host_data; - unsigned long bitval = 1UL << data->hwirq; + struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data); + struct s3c_irq_intc *intc = irq_data->intc; + unsigned long bitval = 1UL << irq_data->offset; __raw_writel(bitval, intc->reg_pending); if (intc->reg_intpnd) @@ -291,8 +293,7 @@ static struct irq_chip s3c_irq_eint0t4 = { static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); - struct s3c_irq_intc *intc = desc->irq_data.domain->host_data; - struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq]; + struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc); struct s3c_irq_intc *sub_intc = irq_data->sub_intc; unsigned long src; unsigned long msk; @@ -406,6 +407,7 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, /* attach controller pointer to irq_data */ irq_data->intc = intc; + irq_data->offset = hw; parent_intc = intc->parent; @@ -444,6 +446,9 @@ static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq, pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type); return -EINVAL; } + + irq_set_chip_data(virq, irq_data); + set_irq_flags(virq, IRQF_VALID); if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) { -- cgit v1.2.3-59-g8ed1b From f0774d41da0e607b70e54ecc50aeb6684f54c2b1 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Apr 2013 14:55:10 +0900 Subject: irqchip: s3c24xx: add devicetree support Add the necessary code to initialize the interrupt controller thru devicetree data using the irqchip infrastructure. Signed-off-by: Heiko Stuebner Acked-by: Arnd Bergmann Acked-by: Rob Herring Signed-off-by: Kukjin Kim --- .../interrupt-controller/samsung,s3c24xx-irq.txt | 53 +++++ drivers/irqchip/irq-s3c24xx.c | 231 ++++++++++++++++++++- 2 files changed, 278 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt (limited to 'drivers/irqchip') diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt new file mode 100644 index 000000000000..c54c5a9a2a90 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt @@ -0,0 +1,53 @@ +Samsung S3C24XX Interrupt Controllers + +The S3C24XX SoCs contain a custom set of interrupt controllers providing a +varying number of interrupt sources. The set consists of a main- and sub- +controller and on newer SoCs even a second main controller. + +Required properties: +- compatible: Compatible property value should be "samsung,s3c2410-irq" + for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later. + +- reg: Physical base address of the controller and length of memory mapped + region. + +- interrupt-controller : Identifies the node as an interrupt controller + +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 4 and interrupt descriptor shall + have the following format: + + + ctrl_num contains the controller to use: + - 0 ... main controller + - 1 ... sub controller + - 2 ... second main controller on s3c2416 and s3c2450 + parent_irq contains the parent bit in the main controller and will be + ignored in main controllers + ctrl_irq contains the interrupt bit of the controller + type contains the trigger type to use + +Example: + + interrupt-controller@4a000000 { + compatible = "samsung,s3c2410-irq"; + reg = <0x4a000000 0x100>; + interrupt-controller; + #interrupt-cells=<4>; + }; + + [...] + + serial@50000000 { + compatible = "samsung,s3c2410-uart"; + reg = <0x50000000 0x4000>; + interrupt-parent = <&subintc>; + interrupts = <1 28 0 4>, <1 28 1 4>; + }; + + rtc@57000000 { + compatible = "samsung,s3c2410-rtc"; + reg = <0x57000000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 30 0 3>, <0 8 0 3>; + }; diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c index 02b82db086d8..5e40b3424df8 100644 --- a/drivers/irqchip/irq-s3c24xx.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -25,6 +25,9 @@ #include #include #include +#include +#include +#include #include #include @@ -36,6 +39,8 @@ #include #include +#include "irqchip.h" + #define S3C_IRQTYPE_NONE 0 #define S3C_IRQTYPE_EINT 1 #define S3C_IRQTYPE_EDGE 2 @@ -94,7 +99,10 @@ static void s3c_irq_mask(struct irq_data *data) if (parent_intc) { parent_data = &parent_intc->irqs[irq_data->parent_irq]; - /* check to see if we need to mask the parent IRQ */ + /* check to see if we need to mask the parent IRQ + * The parent_irq is always in main_intc, so the hwirq + * for find_mapping does not need an offset in any case. + */ if ((mask & parent_data->sub_bits) == parent_data->sub_bits) { irqno = irq_find_mapping(parent_intc->domain, irq_data->parent_irq); @@ -294,10 +302,18 @@ static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc); + struct s3c_irq_intc *intc = irq_data->intc; struct s3c_irq_intc *sub_intc = irq_data->sub_intc; unsigned long src; unsigned long msk; unsigned int n; + unsigned int offset; + + /* we're using individual domains for the non-dt case + * and one big domain for the dt case where the subintc + * starts at hwirq number 32. + */ + offset = (intc->domain->of_node) ? 32 : 0; chained_irq_enter(chip, desc); @@ -310,14 +326,15 @@ static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc) while (src) { n = __ffs(src); src &= ~(1 << n); - generic_handle_irq(irq_find_mapping(sub_intc->domain, n)); + irq = irq_find_mapping(sub_intc->domain, offset + n); + generic_handle_irq(irq); } chained_irq_exit(chip, desc); } static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, - struct pt_regs *regs) + struct pt_regs *regs, int intc_offset) { int pnd; int offset; @@ -327,6 +344,10 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, if (!pnd) return false; + /* non-dt machines use individual domains */ + if (!intc->domain->of_node) + intc_offset = 0; + /* We have a problem that the INTOFFSET register does not always * show one interrupt. Occasionally we get two interrupts through * the prioritiser, and this causes the INTOFFSET register to show @@ -343,7 +364,7 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, if (!(pnd & (1 << offset))) offset = __ffs(pnd); - irq = irq_find_mapping(intc->domain, offset); + irq = irq_find_mapping(intc->domain, intc_offset + offset); handle_IRQ(irq, regs); return true; } @@ -352,11 +373,11 @@ asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) { do { if (likely(s3c_intc[0])) - if (s3c24xx_handle_intc(s3c_intc[0], regs)) + if (s3c24xx_handle_intc(s3c_intc[0], regs, 0)) continue; if (s3c_intc[2]) - if (s3c24xx_handle_intc(s3c_intc[2], regs)) + if (s3c24xx_handle_intc(s3c_intc[2], regs, 64)) continue; break; @@ -1134,3 +1155,201 @@ void __init s3c2443_init_irq(void) s3c_intc[0], 0x4a000018); } #endif + +#ifdef CONFIG_OF +static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + unsigned int ctrl_num = hw / 32; + unsigned int intc_hw = hw % 32; + struct s3c_irq_intc *intc = s3c_intc[ctrl_num]; + struct s3c_irq_intc *parent_intc = intc->parent; + struct s3c_irq_data *irq_data = &intc->irqs[intc_hw]; + + /* attach controller pointer to irq_data */ + irq_data->intc = intc; + irq_data->offset = intc_hw; + + if (!parent_intc) + irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq); + else + irq_set_chip_and_handler(virq, &s3c_irq_level_chip, + handle_edge_irq); + + irq_set_chip_data(virq, irq_data); + + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +/* Translate our of irq notation + * format: + */ +static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + struct s3c_irq_intc *intc; + struct s3c_irq_intc *parent_intc; + struct s3c_irq_data *irq_data; + struct s3c_irq_data *parent_irq_data; + int irqno; + + if (WARN_ON(intsize < 4)) + return -EINVAL; + + if (intspec[0] > 2 || !s3c_intc[intspec[0]]) { + pr_err("controller number %d invalid\n", intspec[0]); + return -EINVAL; + } + intc = s3c_intc[intspec[0]]; + + *out_hwirq = intspec[0] * 32 + intspec[2]; + *out_type = intspec[3] & IRQ_TYPE_SENSE_MASK; + + parent_intc = intc->parent; + if (parent_intc) { + irq_data = &intc->irqs[intspec[2]]; + irq_data->parent_irq = intspec[1]; + parent_irq_data = &parent_intc->irqs[irq_data->parent_irq]; + parent_irq_data->sub_intc = intc; + parent_irq_data->sub_bits |= (1UL << intspec[2]); + + /* parent_intc is always s3c_intc[0], so no offset */ + irqno = irq_create_mapping(parent_intc->domain, intspec[1]); + if (irqno < 0) { + pr_err("irq: could not map parent interrupt\n"); + return irqno; + } + + irq_set_chained_handler(irqno, s3c_irq_demux); + } + + return 0; +} + +static struct irq_domain_ops s3c24xx_irq_ops_of = { + .map = s3c24xx_irq_map_of, + .xlate = s3c24xx_irq_xlate_of, +}; + +struct s3c24xx_irq_of_ctrl { + char *name; + unsigned long offset; + struct s3c_irq_intc **handle; + struct s3c_irq_intc **parent; + struct irq_domain_ops *ops; +}; + +static int __init s3c_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl) +{ + struct s3c_irq_intc *intc; + struct s3c24xx_irq_of_ctrl *ctrl; + struct irq_domain *domain; + void __iomem *reg_base; + int i; + + reg_base = of_iomap(np, 0); + if (!reg_base) { + pr_err("irq-s3c24xx: could not map irq registers\n"); + return -EINVAL; + } + + domain = irq_domain_add_linear(np, num_ctrl * 32, + &s3c24xx_irq_ops_of, NULL); + if (!domain) { + pr_err("irq: could not create irq-domain\n"); + return -EINVAL; + } + + for (i = 0; i < num_ctrl; i++) { + ctrl = &s3c_ctrl[i]; + + pr_debug("irq: found controller %s\n", ctrl->name); + + intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL); + if (!intc) + return -ENOMEM; + + intc->domain = domain; + intc->irqs = kzalloc(sizeof(struct s3c_irq_data) * 32, + GFP_KERNEL); + if (!intc->irqs) { + kfree(intc); + return -ENOMEM; + } + + if (ctrl->parent) { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x4; + + if (*(ctrl->parent)) { + intc->parent = *(ctrl->parent); + } else { + pr_warn("irq: parent of %s missing\n", + ctrl->name); + kfree(intc->irqs); + kfree(intc); + continue; + } + } else { + intc->reg_pending = reg_base + ctrl->offset; + intc->reg_mask = reg_base + ctrl->offset + 0x08; + intc->reg_intpnd = reg_base + ctrl->offset + 0x10; + } + + s3c24xx_clear_intc(intc); + s3c_intc[i] = intc; + } + + set_handle_irq(s3c24xx_handle_irq); + + return 0; +} + +static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + } +}; + +int __init s3c2410_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl)); +} +IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of); + +static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = { + { + .name = "intc", + .offset = 0, + }, { + .name = "subintc", + .offset = 0x18, + .parent = &s3c_intc[0], + }, { + .name = "intc2", + .offset = 0x40, + } +}; + +int __init s3c2416_init_intc_of(struct device_node *np, + struct device_node *interrupt_parent, + struct s3c24xx_irq_of_ctrl *ctrl, int num_ctrl) +{ + return s3c_init_intc_of(np, interrupt_parent, + s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl)); +} +IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of); +#endif -- cgit v1.2.3-59-g8ed1b