From e9a804d7a428432d8ad0bc7984f459daf0cc4da3 Mon Sep 17 00:00:00 2001 From: Christian Mauderer Date: Mon, 13 May 2019 21:33:07 +0200 Subject: leds: spi-byte: add single byte SPI LED driver This driver adds support for simple SPI based LED controller which use only one byte for setting the brightness. Signed-off-by: Christian Mauderer Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski --- drivers/leds/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/leds/Kconfig') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 71be87bdb926..35fcddb7ac2a 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -783,6 +783,16 @@ config LEDS_NIC78BX To compile this driver as a module, choose M here: the module will be called leds-nic78bx. +config LEDS_SPI_BYTE + tristate "LED support for SPI LED controller with a single byte" + depends on LEDS_CLASS + depends on SPI + depends on OF + help + This option enables support for LED controller which use a single byte + for controlling the brightness. Currently the following controller is + supported: Ubiquiti airCube ISP microcontroller based LED controller. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" -- cgit v1.2.3-59-g8ed1b From 3fce8e1eb9945c2771360542b71ff717460ba4d7 Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Mon, 6 May 2019 14:16:11 -0500 Subject: leds: TI LMU: Add common code for TI LMU devices Create a TI LMU common framework for TI LMU devices that share common features. Currently the runtime ramp and brightness setting have been identified as common features with common register settings. This work is derived from Milo Kims TI LMU MFD code. Signed-off-by: Dan Murphy Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski --- drivers/leds/Kconfig | 9 +++ drivers/leds/Makefile | 1 + drivers/leds/leds-ti-lmu-common.c | 156 +++++++++++++++++++++++++++++++++++++ include/linux/leds-ti-lmu-common.h | 47 +++++++++++ 4 files changed, 213 insertions(+) create mode 100644 drivers/leds/leds-ti-lmu-common.c create mode 100644 include/linux/leds-ti-lmu-common.h (limited to 'drivers/leds/Kconfig') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 71be87bdb926..4e262696be19 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -783,6 +783,15 @@ config LEDS_NIC78BX To compile this driver as a module, choose M here: the module will be called leds-nic78bx. +config LEDS_TI_LMU_COMMON + tristate "LED driver for TI LMU" + depends on LEDS_CLASS + depends on REGMAP + help + Say Y to enable the LED driver for TI LMU devices. + This supports common features between the TI LM3532, LM3631, LM3632, + LM3633, LM3695 and LM3697. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 1e9702ebffee..84c49339a8e3 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -81,6 +81,7 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o +obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o # LED SPI Drivers obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o diff --git a/drivers/leds/leds-ti-lmu-common.c b/drivers/leds/leds-ti-lmu-common.c new file mode 100644 index 000000000000..adc7293004f1 --- /dev/null +++ b/drivers/leds/leds-ti-lmu-common.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright 2015 Texas Instruments +// Copyright 2018 Sebastian Reichel +// Copyright 2018 Pavel Machek +// TI LMU LED common framework, based on previous work from +// Milo Kim + +#include +#include +#include + +#include + +const static int ramp_table[16] = {2048, 262000, 524000, 1049000, 2090000, + 4194000, 8389000, 16780000, 33550000, 41940000, + 50330000, 58720000, 67110000, 83880000, + 100660000, 117440000}; + +static int ti_lmu_common_update_brightness(struct ti_lmu_bank *lmu_bank, + int brightness) +{ + struct regmap *regmap = lmu_bank->regmap; + u8 reg, val; + int ret; + + /* + * Brightness register update + * + * 11 bit dimming: update LSB bits and write MSB byte. + * MSB brightness should be shifted. + * 8 bit dimming: write MSB byte. + */ + if (lmu_bank->max_brightness == MAX_BRIGHTNESS_11BIT) { + reg = lmu_bank->lsb_brightness_reg; + ret = regmap_update_bits(regmap, reg, + LMU_11BIT_LSB_MASK, + brightness); + if (ret) + return ret; + + val = brightness >> LMU_11BIT_MSB_SHIFT; + } else { + val = brightness; + } + + reg = lmu_bank->msb_brightness_reg; + + return regmap_write(regmap, reg, val); +} + +int ti_lmu_common_set_brightness(struct ti_lmu_bank *lmu_bank, int brightness) +{ + return ti_lmu_common_update_brightness(lmu_bank, brightness); +} +EXPORT_SYMBOL(ti_lmu_common_set_brightness); + +static int ti_lmu_common_convert_ramp_to_index(unsigned int usec) +{ + int size = ARRAY_SIZE(ramp_table); + int i; + + if (usec <= ramp_table[0]) + return 0; + + if (usec > ramp_table[size - 1]) + return size - 1; + + for (i = 1; i < size; i++) { + if (usec == ramp_table[i]) + return i; + + /* Find an approximate index by looking up the table */ + if (usec > ramp_table[i - 1] && usec < ramp_table[i]) { + if (usec - ramp_table[i - 1] < ramp_table[i] - usec) + return i - 1; + else + return i; + } + } + + return -EINVAL; +} + +int ti_lmu_common_set_ramp(struct ti_lmu_bank *lmu_bank) +{ + struct regmap *regmap = lmu_bank->regmap; + u8 ramp, ramp_up, ramp_down; + + if (lmu_bank->ramp_up_usec == 0 && lmu_bank->ramp_down_usec == 0) { + ramp_up = 0; + ramp_down = 0; + } else { + ramp_up = ti_lmu_common_convert_ramp_to_index(lmu_bank->ramp_up_usec); + ramp_down = ti_lmu_common_convert_ramp_to_index(lmu_bank->ramp_down_usec); + } + + if (ramp_up < 0 || ramp_down < 0) + return -EINVAL; + + ramp = (ramp_up << 4) | ramp_down; + + return regmap_write(regmap, lmu_bank->runtime_ramp_reg, ramp); + +} +EXPORT_SYMBOL(ti_lmu_common_set_ramp); + +int ti_lmu_common_get_ramp_params(struct device *dev, + struct fwnode_handle *child, + struct ti_lmu_bank *lmu_data) +{ + int ret; + + ret = fwnode_property_read_u32(child, "ramp-up-us", + &lmu_data->ramp_up_usec); + if (ret) + dev_warn(dev, "ramp-up-us property missing\n"); + + + ret = fwnode_property_read_u32(child, "ramp-down-us", + &lmu_data->ramp_down_usec); + if (ret) + dev_warn(dev, "ramp-down-us property missing\n"); + + return 0; +} +EXPORT_SYMBOL(ti_lmu_common_get_ramp_params); + +int ti_lmu_common_get_brt_res(struct device *dev, struct fwnode_handle *child, + struct ti_lmu_bank *lmu_data) +{ + int ret; + + ret = device_property_read_u32(dev, "ti,brightness-resolution", + &lmu_data->max_brightness); + if (ret) + ret = fwnode_property_read_u32(child, + "ti,brightness-resolution", + &lmu_data->max_brightness); + if (lmu_data->max_brightness <= 0) { + lmu_data->max_brightness = MAX_BRIGHTNESS_8BIT; + return ret; + } + + if (lmu_data->max_brightness > MAX_BRIGHTNESS_11BIT) + lmu_data->max_brightness = MAX_BRIGHTNESS_11BIT; + + + return 0; +} +EXPORT_SYMBOL(ti_lmu_common_get_brt_res); + +MODULE_DESCRIPTION("TI LMU common LED framework"); +MODULE_AUTHOR("Sebastian Reichel"); +MODULE_AUTHOR("Dan Murphy "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("ti-lmu-led-common"); diff --git a/include/linux/leds-ti-lmu-common.h b/include/linux/leds-ti-lmu-common.h new file mode 100644 index 000000000000..5eb111f38803 --- /dev/null +++ b/include/linux/leds-ti-lmu-common.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// TI LMU Common Core +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + +#ifndef _TI_LMU_COMMON_H_ +#define _TI_LMU_COMMON_H_ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define LMU_11BIT_LSB_MASK (BIT(0) | BIT(1) | BIT(2)) +#define LMU_11BIT_MSB_SHIFT 3 + +#define MAX_BRIGHTNESS_8BIT 255 +#define MAX_BRIGHTNESS_11BIT 2047 + +struct ti_lmu_bank { + struct regmap *regmap; + + int max_brightness; + + u8 lsb_brightness_reg; + u8 msb_brightness_reg; + + u8 runtime_ramp_reg; + u32 ramp_up_usec; + u32 ramp_down_usec; +}; + +int ti_lmu_common_set_brightness(struct ti_lmu_bank *lmu_bank, int brightness); + +int ti_lmu_common_set_ramp(struct ti_lmu_bank *lmu_bank); + +int ti_lmu_common_get_ramp_params(struct device *dev, + struct fwnode_handle *child, + struct ti_lmu_bank *lmu_data); + +int ti_lmu_common_get_brt_res(struct device *dev, struct fwnode_handle *child, + struct ti_lmu_bank *lmu_data); + +#endif /* _TI_LMU_COMMON_H_ */ -- cgit v1.2.3-59-g8ed1b From 5c1d824cda9f6059ee5fb6cc83cd4f47c85cf215 Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Mon, 6 May 2019 14:16:14 -0500 Subject: leds: lm3697: Introduce the lm3697 driver Introduce the lm3697 LED driver for backlighting and display. Datasheet location: http://www.ti.com/lit/ds/symlink/lm3697.pdf Signed-off-by: Dan Murphy Signed-off-by: Jacek Anaszewski --- drivers/leds/Kconfig | 8 + drivers/leds/Makefile | 1 + drivers/leds/leds-lm3697.c | 395 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 404 insertions(+) create mode 100644 drivers/leds/leds-lm3697.c (limited to 'drivers/leds/Kconfig') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 4e262696be19..ba14b4894855 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -792,6 +792,14 @@ config LEDS_TI_LMU_COMMON This supports common features between the TI LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. +config LEDS_LM3697 + tristate "LED driver for LM3697" + depends on LEDS_TI_LMU_COMMON + depends on I2C && OF + help + Say Y to enable the LM3697 LED driver for TI LMU devices. + This supports the LED device LM3697. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 84c49339a8e3..6c3350404ede 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -82,6 +82,7 @@ obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o +obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o # LED SPI Drivers obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o diff --git a/drivers/leds/leds-lm3697.c b/drivers/leds/leds-lm3697.c new file mode 100644 index 000000000000..54e0e35df824 --- /dev/null +++ b/drivers/leds/leds-lm3697.c @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LM3697 LED chip family driver +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + +#include +#include +#include +#include +#include +#include + +#define LM3697_REV 0x0 +#define LM3697_RESET 0x1 +#define LM3697_OUTPUT_CONFIG 0x10 +#define LM3697_CTRL_A_RAMP 0x11 +#define LM3697_CTRL_B_RAMP 0x12 +#define LM3697_CTRL_A_B_RT_RAMP 0x13 +#define LM3697_CTRL_A_B_RAMP_CFG 0x14 +#define LM3697_CTRL_A_B_BRT_CFG 0x16 +#define LM3697_CTRL_A_FS_CURR_CFG 0x17 +#define LM3697_CTRL_B_FS_CURR_CFG 0x18 +#define LM3697_PWM_CFG 0x1c +#define LM3697_CTRL_A_BRT_LSB 0x20 +#define LM3697_CTRL_A_BRT_MSB 0x21 +#define LM3697_CTRL_B_BRT_LSB 0x22 +#define LM3697_CTRL_B_BRT_MSB 0x23 +#define LM3697_CTRL_ENABLE 0x24 + +#define LM3697_SW_RESET BIT(0) + +#define LM3697_CTRL_A_EN BIT(0) +#define LM3697_CTRL_B_EN BIT(1) +#define LM3697_CTRL_A_B_EN (LM3697_CTRL_A_EN | LM3697_CTRL_B_EN) + +#define LM3697_MAX_LED_STRINGS 3 + +#define LM3697_CONTROL_A 0 +#define LM3697_CONTROL_B 1 +#define LM3697_MAX_CONTROL_BANKS 2 + +/** + * struct lm3697_led - + * @hvled_strings: Array of LED strings associated with a control bank + * @label: LED label + * @led_dev: LED class device + * @priv: Pointer to the device struct + * @lmu_data: Register and setting values for common code + * @control_bank: Control bank the LED is associated to. 0 is control bank A + * 1 is control bank B + */ +struct lm3697_led { + u32 hvled_strings[LM3697_MAX_LED_STRINGS]; + char label[LED_MAX_NAME_SIZE]; + struct led_classdev led_dev; + struct lm3697 *priv; + struct ti_lmu_bank lmu_data; + int control_bank; + int enabled; + int num_leds; +}; + +/** + * struct lm3697 - + * @enable_gpio: Hardware enable gpio + * @regulator: LED supply regulator pointer + * @client: Pointer to the I2C client + * @regmap: Devices register map + * @dev: Pointer to the devices device struct + * @lock: Lock for reading/writing the device + * @leds: Array of LED strings + */ +struct lm3697 { + struct gpio_desc *enable_gpio; + struct regulator *regulator; + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + + int bank_cfg; + + struct lm3697_led leds[]; +}; + +static const struct reg_default lm3697_reg_defs[] = { + {LM3697_OUTPUT_CONFIG, 0x6}, + {LM3697_CTRL_A_RAMP, 0x0}, + {LM3697_CTRL_B_RAMP, 0x0}, + {LM3697_CTRL_A_B_RT_RAMP, 0x0}, + {LM3697_CTRL_A_B_RAMP_CFG, 0x0}, + {LM3697_CTRL_A_B_BRT_CFG, 0x0}, + {LM3697_CTRL_A_FS_CURR_CFG, 0x13}, + {LM3697_CTRL_B_FS_CURR_CFG, 0x13}, + {LM3697_PWM_CFG, 0xc}, + {LM3697_CTRL_A_BRT_LSB, 0x0}, + {LM3697_CTRL_A_BRT_MSB, 0x0}, + {LM3697_CTRL_B_BRT_LSB, 0x0}, + {LM3697_CTRL_B_BRT_MSB, 0x0}, + {LM3697_CTRL_ENABLE, 0x0}, +}; + +static const struct regmap_config lm3697_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LM3697_CTRL_ENABLE, + .reg_defaults = lm3697_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs), + .cache_type = REGCACHE_FLAT, +}; + +static int lm3697_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brt_val) +{ + struct lm3697_led *led = container_of(led_cdev, struct lm3697_led, + led_dev); + int ctrl_en_val = (1 << led->control_bank); + int ret; + + mutex_lock(&led->priv->lock); + + if (brt_val == LED_OFF) { + ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE, + ctrl_en_val, ~ctrl_en_val); + if (ret) { + dev_err(&led->priv->client->dev, "Cannot write ctrl register\n"); + goto brightness_out; + } + + led->enabled = LED_OFF; + } else { + ret = ti_lmu_common_set_brightness(&led->lmu_data, brt_val); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot write brightness\n"); + goto brightness_out; + } + + if (!led->enabled) { + ret = regmap_update_bits(led->priv->regmap, + LM3697_CTRL_ENABLE, + ctrl_en_val, ctrl_en_val); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot enable the device\n"); + goto brightness_out; + } + + led->enabled = brt_val; + } + } + +brightness_out: + mutex_unlock(&led->priv->lock); + return ret; +} + +static int lm3697_init(struct lm3697 *priv) +{ + struct lm3697_led *led; + int i, ret; + + if (priv->enable_gpio) { + gpiod_direction_output(priv->enable_gpio, 1); + } else { + ret = regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET); + if (ret) { + dev_err(&priv->client->dev, "Cannot reset the device\n"); + goto out; + } + } + + ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0); + if (ret) { + dev_err(&priv->client->dev, "Cannot write ctrl enable\n"); + goto out; + } + + ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, priv->bank_cfg); + if (ret) + dev_err(&priv->client->dev, "Cannot write OUTPUT config\n"); + + for (i = 0; i < LM3697_MAX_CONTROL_BANKS; i++) { + led = &priv->leds[i]; + ret = ti_lmu_common_set_ramp(&led->lmu_data); + if (ret) + dev_err(&priv->client->dev, "Setting the ramp rate failed\n"); + } +out: + return ret; +} + +static int lm3697_probe_dt(struct lm3697 *priv) +{ + struct fwnode_handle *child = NULL; + struct lm3697_led *led; + const char *name; + int control_bank; + size_t i = 0; + int ret = -EINVAL; + int j; + + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, + "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable_gpio)) { + ret = PTR_ERR(priv->enable_gpio); + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n", + ret); + return ret; + } + + priv->regulator = devm_regulator_get(&priv->client->dev, "vled"); + if (IS_ERR(priv->regulator)) + priv->regulator = NULL; + + device_for_each_child_node(priv->dev, child) { + ret = fwnode_property_read_u32(child, "reg", &control_bank); + if (ret) { + dev_err(&priv->client->dev, "reg property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + if (control_bank > LM3697_CONTROL_B) { + dev_err(&priv->client->dev, "reg property is invalid\n"); + ret = -EINVAL; + fwnode_handle_put(child); + goto child_out; + } + + led = &priv->leds[i]; + + ret = ti_lmu_common_get_brt_res(&priv->client->dev, + child, &led->lmu_data); + if (ret) + dev_warn(&priv->client->dev, "brightness resolution property missing\n"); + + led->control_bank = control_bank; + led->lmu_data.regmap = priv->regmap; + led->lmu_data.runtime_ramp_reg = LM3697_CTRL_A_RAMP + + control_bank; + led->lmu_data.msb_brightness_reg = LM3697_CTRL_A_BRT_MSB + + led->control_bank * 2; + led->lmu_data.lsb_brightness_reg = LM3697_CTRL_A_BRT_LSB + + led->control_bank * 2; + + led->num_leds = fwnode_property_read_u32_array(child, + "led-sources", + NULL, 0); + + if (led->num_leds > LM3697_MAX_LED_STRINGS) { + dev_err(&priv->client->dev, "To many LED strings defined\n"); + continue; + } + + ret = fwnode_property_read_u32_array(child, "led-sources", + led->hvled_strings, + led->num_leds); + if (ret) { + dev_err(&priv->client->dev, "led-sources property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + for (j = 0; j < led->num_leds; j++) + priv->bank_cfg |= + (led->control_bank << led->hvled_strings[j]); + + ret = ti_lmu_common_get_ramp_params(&priv->client->dev, + child, &led->lmu_data); + if (ret) + dev_warn(&priv->client->dev, "runtime-ramp properties missing\n"); + + fwnode_property_read_string(child, "linux,default-trigger", + &led->led_dev.default_trigger); + + ret = fwnode_property_read_string(child, "label", &name); + if (ret) + snprintf(led->label, sizeof(led->label), + "%s::", priv->client->name); + else + snprintf(led->label, sizeof(led->label), + "%s:%s", priv->client->name, name); + + led->priv = priv; + led->led_dev.name = led->label; + led->led_dev.max_brightness = led->lmu_data.max_brightness; + led->led_dev.brightness_set_blocking = lm3697_brightness_set; + + ret = devm_led_classdev_register(priv->dev, &led->led_dev); + if (ret) { + dev_err(&priv->client->dev, "led register err: %d\n", + ret); + fwnode_handle_put(child); + goto child_out; + } + + i++; + } + +child_out: + return ret; +} + +static int lm3697_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm3697 *led; + int count; + int ret; + + count = device_get_child_node_count(&client->dev); + if (!count) { + dev_err(&client->dev, "LEDs are not defined in device tree!"); + return -ENODEV; + } + + led = devm_kzalloc(&client->dev, struct_size(led, leds, count), + GFP_KERNEL); + if (!led) + return -ENOMEM; + + mutex_init(&led->lock); + i2c_set_clientdata(client, led); + + led->client = client; + led->dev = &client->dev; + led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config); + if (IS_ERR(led->regmap)) { + ret = PTR_ERR(led->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + ret = lm3697_probe_dt(led); + if (ret) + return ret; + + return lm3697_init(led); +} + +static int lm3697_remove(struct i2c_client *client) +{ + struct lm3697 *led = i2c_get_clientdata(client); + int ret; + + ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE, + LM3697_CTRL_A_B_EN, 0); + if (ret) { + dev_err(&led->client->dev, "Failed to disable the device\n"); + return ret; + } + + if (led->enable_gpio) + gpiod_direction_output(led->enable_gpio, 0); + + if (led->regulator) { + ret = regulator_disable(led->regulator); + if (ret) + dev_err(&led->client->dev, + "Failed to disable regulator\n"); + } + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct i2c_device_id lm3697_id[] = { + { "lm3697", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm3697_id); + +static const struct of_device_id of_lm3697_leds_match[] = { + { .compatible = "ti,lm3697", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lm3697_leds_match); + +static struct i2c_driver lm3697_driver = { + .driver = { + .name = "lm3697", + .of_match_table = of_lm3697_leds_match, + }, + .probe = lm3697_probe, + .remove = lm3697_remove, + .id_table = lm3697_id, +}; +module_i2c_driver(lm3697_driver); + +MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver"); +MODULE_AUTHOR("Dan Murphy "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-59-g8ed1b From 11e1bbc116a75d4a93122ea0a3b2be814922d864 Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Wed, 5 Jun 2019 07:56:34 -0500 Subject: leds: lm36274: Introduce the TI LM36274 LED driver Introduce the LM36274 LED driver. This driver uses the ti-lmu MFD driver to probe this LED driver. The driver configures only the LED registers and enables the outputs according to the config file. The driver utilizes the TI LMU (Lighting Management Unit) LED common framework to set the brightness bits. Signed-off-by: Dan Murphy Acked-by: Pavel Machek Signed-off-by: Jacek Anaszewski --- drivers/leds/Kconfig | 8 +++ drivers/leds/Makefile | 1 + drivers/leds/leds-lm36274.c | 172 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 181 insertions(+) create mode 100644 drivers/leds/leds-lm36274.c (limited to 'drivers/leds/Kconfig') diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index ba14b4894855..c36cbabdd9c6 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -800,6 +800,14 @@ config LEDS_LM3697 Say Y to enable the LM3697 LED driver for TI LMU devices. This supports the LED device LM3697. +config LEDS_LM36274 + tristate "LED driver for LM36274" + depends on LEDS_TI_LMU_COMMON + depends on MFD_TI_LMU + help + Say Y to enable the LM36274 LED driver for TI LMU devices. + This supports the LED device LM36274. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 6c3350404ede..c52934732c1a 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -83,6 +83,7 @@ obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o +obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o # LED SPI Drivers obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o diff --git a/drivers/leds/leds-lm36274.c b/drivers/leds/leds-lm36274.c new file mode 100644 index 000000000000..ed9dc857ec8f --- /dev/null +++ b/drivers/leds/leds-lm36274.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LM36274 LED chip family driver +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define LM36274_MAX_STRINGS 4 +#define LM36274_BL_EN BIT(4) + +/** + * struct lm36274 + * @pdev: platform device + * @led_dev: led class device + * @lmu_data: Register and setting values for common code + * @regmap: Devices register map + * @dev: Pointer to the devices device struct + * @led_sources - The LED strings supported in this array + * @num_leds - Number of LED strings are supported in this array + */ +struct lm36274 { + struct platform_device *pdev; + struct led_classdev led_dev; + struct ti_lmu_bank lmu_data; + struct regmap *regmap; + struct device *dev; + + u32 led_sources[LM36274_MAX_STRINGS]; + int num_leds; +}; + +static int lm36274_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brt_val) +{ + struct lm36274 *led = container_of(led_cdev, struct lm36274, led_dev); + + return ti_lmu_common_set_brightness(&led->lmu_data, brt_val); +} + +static int lm36274_init(struct lm36274 *lm36274_data) +{ + int enable_val = 0; + int i; + + for (i = 0; i < lm36274_data->num_leds; i++) + enable_val |= (1 << lm36274_data->led_sources[i]); + + if (!enable_val) { + dev_err(lm36274_data->dev, "No LEDs were enabled\n"); + return -EINVAL; + } + + enable_val |= LM36274_BL_EN; + + return regmap_write(lm36274_data->regmap, LM36274_REG_BL_EN, + enable_val); +} + +static int lm36274_parse_dt(struct lm36274 *lm36274_data) +{ + struct fwnode_handle *child = NULL; + char label[LED_MAX_NAME_SIZE]; + struct device *dev = &lm36274_data->pdev->dev; + const char *name; + int child_cnt; + int ret = -EINVAL; + + /* There should only be 1 node */ + child_cnt = device_get_child_node_count(dev); + if (child_cnt != 1) + return -EINVAL; + + device_for_each_child_node(dev, child) { + ret = fwnode_property_read_string(child, "label", &name); + if (ret) + snprintf(label, sizeof(label), + "%s::", lm36274_data->pdev->name); + else + snprintf(label, sizeof(label), + "%s:%s", lm36274_data->pdev->name, name); + + lm36274_data->num_leds = fwnode_property_read_u32_array(child, + "led-sources", + NULL, 0); + if (lm36274_data->num_leds <= 0) + return -ENODEV; + + ret = fwnode_property_read_u32_array(child, "led-sources", + lm36274_data->led_sources, + lm36274_data->num_leds); + if (ret) { + dev_err(dev, "led-sources property missing\n"); + return ret; + } + + fwnode_property_read_string(child, "linux,default-trigger", + &lm36274_data->led_dev.default_trigger); + + } + + lm36274_data->lmu_data.regmap = lm36274_data->regmap; + lm36274_data->lmu_data.max_brightness = MAX_BRIGHTNESS_11BIT; + lm36274_data->lmu_data.msb_brightness_reg = LM36274_REG_BRT_MSB; + lm36274_data->lmu_data.lsb_brightness_reg = LM36274_REG_BRT_LSB; + + lm36274_data->led_dev.name = label; + lm36274_data->led_dev.max_brightness = MAX_BRIGHTNESS_11BIT; + lm36274_data->led_dev.brightness_set_blocking = lm36274_brightness_set; + + return 0; +} + +static int lm36274_probe(struct platform_device *pdev) +{ + struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent); + struct lm36274 *lm36274_data; + int ret; + + lm36274_data = devm_kzalloc(&pdev->dev, sizeof(*lm36274_data), + GFP_KERNEL); + if (!lm36274_data) + return -ENOMEM; + + lm36274_data->pdev = pdev; + lm36274_data->dev = lmu->dev; + lm36274_data->regmap = lmu->regmap; + dev_set_drvdata(&pdev->dev, lm36274_data); + + ret = lm36274_parse_dt(lm36274_data); + if (ret) { + dev_err(lm36274_data->dev, "Failed to parse DT node\n"); + return ret; + } + + ret = lm36274_init(lm36274_data); + if (ret) { + dev_err(lm36274_data->dev, "Failed to init the device\n"); + return ret; + } + + return devm_led_classdev_register(lm36274_data->dev, + &lm36274_data->led_dev); +} + +static const struct of_device_id of_lm36274_leds_match[] = { + { .compatible = "ti,lm36274-backlight", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lm36274_leds_match); + +static struct platform_driver lm36274_driver = { + .probe = lm36274_probe, + .driver = { + .name = "lm36274-leds", + }, +}; +module_platform_driver(lm36274_driver) + +MODULE_DESCRIPTION("Texas Instruments LM36274 LED driver"); +MODULE_AUTHOR("Dan Murphy "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-59-g8ed1b