From 02d76a471975382ccf7f9d4b0859e00fe723265f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 12 Dec 2019 15:23:27 +0100 Subject: media: coda: avoid hardware lockups with more than 13 capture buffers When decoding using the CODA internal rotator (for example NV12 capture), currently the value vb2_buf.index + CODA_MAX_FRAMEBUFFERS (19) is written into the DEC_PIC_ROT_INDEX register. At least with firmware version 3.1.1 this causes CODA hangups as soon as the register value reaches 32. Instead, always write CODA_MAX_FRAMEBUFFERS. Signed-off-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/coda/coda-bit.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers/media/platform') diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c index 5475de176ce3..3443396ba5f3 100644 --- a/drivers/media/platform/coda/coda-bit.c +++ b/drivers/media/platform/coda/coda-bit.c @@ -2168,16 +2168,21 @@ static int coda_prepare_decode(struct coda_ctx *ctx) } else { if (dev->devtype->product == CODA_960) { /* - * The CODA960 seems to have an internal list of - * buffers with 64 entries that includes the - * registered frame buffers as well as the rotator - * buffer output. - * - * ROT_INDEX needs to be < 0x40, but > - * ctx->num_internal_frames. + * It was previously assumed that the CODA960 has an + * internal list of 64 buffer entries that contains + * both the registered internal frame buffers as well + * as the rotator buffer output, and that the ROT_INDEX + * register must be set to a value between the last + * internal frame buffers' index and 64. + * At least on firmware version 3.1.1 it turns out that + * setting ROT_INDEX to any value >= 32 causes CODA + * hangups that it can not recover from with the SRC VPU + * reset. + * It does appear to work however, to just set it to a + * fixed value in the [ctx->num_internal_frames, 31] + * range, for example CODA_MAX_FRAMEBUFFERS. */ - coda_write(dev, - CODA_MAX_FRAMEBUFFERS + dst_buf->vb2_buf.index, + coda_write(dev, CODA_MAX_FRAMEBUFFERS, CODA9_CMD_DEC_PIC_ROT_INDEX); reg_addr = CODA9_CMD_DEC_PIC_ROT_ADDR_Y; -- cgit v1.2.3-59-g8ed1b