From 0c0d06cac63ee327ceaab4b5ffe2206574ab86bd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 14 Aug 2012 00:13:22 -0300 Subject: [media] rename most media/video usb drivers to media/usb Rename all USB drivers with their own directory under drivers/media/video into drivers/media/usb and update the building system. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/stk1160/stk1160-core.c | 432 +++++++++++++++++++++++++++++++ 1 file changed, 432 insertions(+) create mode 100644 drivers/media/usb/stk1160/stk1160-core.c (limited to 'drivers/media/usb/stk1160/stk1160-core.c') diff --git a/drivers/media/usb/stk1160/stk1160-core.c b/drivers/media/usb/stk1160/stk1160-core.c new file mode 100644 index 000000000000..74236fd3b7ec --- /dev/null +++ b/drivers/media/usb/stk1160/stk1160-core.c @@ -0,0 +1,432 @@ +/* + * STK1160 driver + * + * Copyright (C) 2012 Ezequiel Garcia + * + * + * Based on Easycap driver by R.M. Thomas + * Copyright (C) 2010 R.M. Thomas + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * TODO: + * + * 1. (Try to) detect if we must register ac97 mixer + * 2. Support stream at lower speed: lower frame rate or lower frame size. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "stk1160.h" +#include "stk1160-reg.h" + +static unsigned int input; +module_param(input, int, 0644); +MODULE_PARM_DESC(input, "Set default input"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ezequiel Garcia"); +MODULE_DESCRIPTION("STK1160 driver"); + +/* Devices supported by this driver */ +static struct usb_device_id stk1160_id_table[] = { + { USB_DEVICE(0x05e1, 0x0408) }, + { } +}; +MODULE_DEVICE_TABLE(usb, stk1160_id_table); + +/* saa7113 I2C address */ +static unsigned short saa7113_addrs[] = { + 0x4a >> 1, + I2C_CLIENT_END +}; + +/* + * Read/Write stk registers + */ +int stk1160_read_reg(struct stk1160 *dev, u16 reg, u8 *value) +{ + int ret; + int pipe = usb_rcvctrlpipe(dev->udev, 0); + + *value = 0; + ret = usb_control_msg(dev->udev, pipe, 0x00, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x00, reg, value, sizeof(u8), HZ); + if (ret < 0) { + stk1160_err("read failed on reg 0x%x (%d)\n", + reg, ret); + return ret; + } + + return 0; +} + +int stk1160_write_reg(struct stk1160 *dev, u16 reg, u16 value) +{ + int ret; + int pipe = usb_sndctrlpipe(dev->udev, 0); + + ret = usb_control_msg(dev->udev, pipe, 0x01, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, reg, NULL, 0, HZ); + if (ret < 0) { + stk1160_err("write failed on reg 0x%x (%d)\n", + reg, ret); + return ret; + } + + return 0; +} + +void stk1160_select_input(struct stk1160 *dev) +{ + static const u8 gctrl[] = { + 0x98, 0x90, 0x88, 0x80 + }; + + if (dev->ctl_input < ARRAY_SIZE(gctrl)) + stk1160_write_reg(dev, STK1160_GCTRL, gctrl[dev->ctl_input]); +} + +/* TODO: We should break this into pieces */ +static void stk1160_reg_reset(struct stk1160 *dev) +{ + int i; + + static const struct regval ctl[] = { + {STK1160_GCTRL+2, 0x0078}, + + {STK1160_RMCTL+1, 0x0000}, + {STK1160_RMCTL+3, 0x0002}, + + {STK1160_PLLSO, 0x0010}, + {STK1160_PLLSO+1, 0x0000}, + {STK1160_PLLSO+2, 0x0014}, + {STK1160_PLLSO+3, 0x000E}, + + {STK1160_PLLFD, 0x0046}, + + /* Timing generator setup */ + {STK1160_TIGEN, 0x0012}, + {STK1160_TICTL, 0x002D}, + {STK1160_TICTL+1, 0x0001}, + {STK1160_TICTL+2, 0x0000}, + {STK1160_TICTL+3, 0x0000}, + {STK1160_TIGEN, 0x0080}, + + {0xffff, 0xffff} + }; + + for (i = 0; ctl[i].reg != 0xffff; i++) + stk1160_write_reg(dev, ctl[i].reg, ctl[i].val); +} + +static void stk1160_release(struct v4l2_device *v4l2_dev) +{ + struct stk1160 *dev = container_of(v4l2_dev, struct stk1160, v4l2_dev); + + stk1160_info("releasing all resources\n"); + + stk1160_i2c_unregister(dev); + + v4l2_ctrl_handler_free(&dev->ctrl_handler); + v4l2_device_unregister(&dev->v4l2_dev); + kfree(dev->alt_max_pkt_size); + kfree(dev); +} + +/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ +#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +/* + * Scan usb interface and populate max_pkt_size array + * with information on each alternate setting. + * The array should be allocated by the caller. + */ +static int stk1160_scan_usb(struct usb_interface *intf, struct usb_device *udev, + unsigned int *max_pkt_size) +{ + int i, e, sizedescr, size, ifnum; + const struct usb_endpoint_descriptor *desc; + + bool has_video = false, has_audio = false; + const char *speed; + + ifnum = intf->altsetting[0].desc.bInterfaceNumber; + + /* Get endpoints */ + for (i = 0; i < intf->num_altsetting; i++) { + + for (e = 0; e < intf->altsetting[i].desc.bNumEndpoints; e++) { + + /* This isn't clear enough, at least to me */ + desc = &intf->altsetting[i].endpoint[e].desc; + sizedescr = le16_to_cpu(desc->wMaxPacketSize); + size = sizedescr & 0x7ff; + + if (udev->speed == USB_SPEED_HIGH) + size = size * hb_mult(sizedescr); + + if (usb_endpoint_xfer_isoc(desc) && + usb_endpoint_dir_in(desc)) { + switch (desc->bEndpointAddress) { + case STK1160_EP_AUDIO: + has_audio = true; + break; + case STK1160_EP_VIDEO: + has_video = true; + max_pkt_size[i] = size; + break; + } + } + } + } + + /* Is this even possible? */ + if (!(has_audio || has_video)) { + dev_err(&udev->dev, "no audio or video endpoints found\n"); + return -ENODEV; + } + + switch (udev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + default: + speed = "unknown"; + } + + dev_info(&udev->dev, "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", + udev->manufacturer ? udev->manufacturer : "", + udev->product ? udev->product : "", + speed, + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + ifnum, + intf->altsetting->desc.bInterfaceNumber); + + /* This should never happen, since we rejected audio interfaces */ + if (has_audio) + dev_warn(&udev->dev, "audio interface %d found.\n\ + This is not implemented by this driver,\ + you should use snd-usb-audio instead\n", ifnum); + + if (has_video) + dev_info(&udev->dev, "video interface %d found\n", + ifnum); + + /* + * Make sure we have 480 Mbps of bandwidth, otherwise things like + * video stream wouldn't likely work, since 12 Mbps is generally + * not enough even for most streams. + */ + if (udev->speed != USB_SPEED_HIGH) + dev_warn(&udev->dev, "must be connected to a high-speed USB 2.0 port\n\ + You may not be able to stream video smoothly\n"); + + return 0; +} + +static int stk1160_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + int ifnum; + int rc = 0; + + unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ + struct usb_device *udev; + struct stk1160 *dev; + + ifnum = interface->altsetting[0].desc.bInterfaceNumber; + udev = interface_to_usbdev(interface); + + /* + * Since usb audio class is supported by snd-usb-audio, + * we reject audio interface. + */ + if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) + return -ENODEV; + + /* Alloc an array for all possible max_pkt_size */ + alt_max_pkt_size = kmalloc(sizeof(alt_max_pkt_size[0]) * + interface->num_altsetting, GFP_KERNEL); + if (alt_max_pkt_size == NULL) + return -ENOMEM; + + /* + * Scan usb posibilities and populate alt_max_pkt_size array. + * Also, check if device speed is fast enough. + */ + rc = stk1160_scan_usb(interface, udev, alt_max_pkt_size); + if (rc < 0) { + kfree(alt_max_pkt_size); + return rc; + } + + dev = kzalloc(sizeof(struct stk1160), GFP_KERNEL); + if (dev == NULL) { + kfree(alt_max_pkt_size); + return -ENOMEM; + } + + dev->alt_max_pkt_size = alt_max_pkt_size; + dev->udev = udev; + dev->num_alt = interface->num_altsetting; + dev->ctl_input = input; + + /* We save struct device for debug purposes only */ + dev->dev = &interface->dev; + + usb_set_intfdata(interface, dev); + + /* initialize videobuf2 stuff */ + rc = stk1160_vb2_setup(dev); + if (rc < 0) + goto free_err; + + /* + * There is no need to take any locks here in probe + * because we register the device node as the *last* thing. + */ + spin_lock_init(&dev->buf_lock); + mutex_init(&dev->v4l_lock); + mutex_init(&dev->vb_queue_lock); + + rc = v4l2_ctrl_handler_init(&dev->ctrl_handler, 0); + if (rc) { + stk1160_err("v4l2_ctrl_handler_init failed (%d)\n", rc); + goto free_err; + } + + /* + * We obtain a v4l2_dev but defer + * registration of video device node as the last thing. + * There is no need to set the name if we give a device struct + */ + dev->v4l2_dev.release = stk1160_release; + dev->v4l2_dev.ctrl_handler = &dev->ctrl_handler; + rc = v4l2_device_register(dev->dev, &dev->v4l2_dev); + if (rc) { + stk1160_err("v4l2_device_register failed (%d)\n", rc); + goto free_ctrl; + } + + rc = stk1160_i2c_register(dev); + if (rc < 0) + goto unreg_v4l2; + + /* + * To the best of my knowledge stk1160 boards only have + * saa7113, but it doesn't hurt to support them all. + */ + dev->sd_saa7115 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "saa7115_auto", 0, saa7113_addrs); + + stk1160_info("driver ver %s successfully loaded\n", + STK1160_VERSION); + + /* i2c reset saa711x */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, reset, 0); + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing, + 0, 0, 0); + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); + + /* reset stk1160 to default values */ + stk1160_reg_reset(dev); + + /* select default input */ + stk1160_select_input(dev); + + stk1160_ac97_register(dev); + + rc = stk1160_video_register(dev); + if (rc < 0) + goto unreg_i2c; + + return 0; + +unreg_i2c: + stk1160_i2c_unregister(dev); +unreg_v4l2: + v4l2_device_unregister(&dev->v4l2_dev); +free_ctrl: + v4l2_ctrl_handler_free(&dev->ctrl_handler); +free_err: + kfree(alt_max_pkt_size); + kfree(dev); + + return rc; +} + +static void stk1160_disconnect(struct usb_interface *interface) +{ + struct stk1160 *dev; + + dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + /* + * Wait until all current v4l2 operation are finished + * then deallocate resources + */ + mutex_lock(&dev->vb_queue_lock); + mutex_lock(&dev->v4l_lock); + + /* Here is the only place where isoc get released */ + stk1160_uninit_isoc(dev); + + /* ac97 unregister needs to be done before usb_device is cleared */ + stk1160_ac97_unregister(dev); + + stk1160_clear_queue(dev); + + video_unregister_device(&dev->vdev); + v4l2_device_disconnect(&dev->v4l2_dev); + + /* This way current users can detect device is gone */ + dev->udev = NULL; + + mutex_unlock(&dev->v4l_lock); + mutex_unlock(&dev->vb_queue_lock); + + /* + * This calls stk1160_release if it's the last reference. + * therwise, release is posponed until there are no users left. + */ + v4l2_device_put(&dev->v4l2_dev); +} + +static struct usb_driver stk1160_usb_driver = { + .name = "stk1160", + .id_table = stk1160_id_table, + .probe = stk1160_probe, + .disconnect = stk1160_disconnect, +}; + +module_usb_driver(stk1160_usb_driver); -- cgit v1.2.3-59-g8ed1b