From dcbd83b1777fa6ed566a8bba035332ed245c0826 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 18 Feb 2009 13:51:13 -0300 Subject: V4L/DVB (10708): zoran: remove old V4L1 ioctls, use v4l1-compat instead. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/media/video/zoran/Kconfig') diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig index 8666e19f31a7..e35121fdf78a 100644 --- a/drivers/media/video/zoran/Kconfig +++ b/drivers/media/video/zoran/Kconfig @@ -1,6 +1,6 @@ config VIDEO_ZORAN tristate "Zoran ZR36057/36067 Video For Linux" - depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS + depends on PCI && I2C_ALGOBIT && VIDEO_V4L2 && VIRT_TO_BUS help Say Y for support for MJPEG capture cards based on the Zoran 36057/36067 PCI controller chipset. This includes the Iomega @@ -66,7 +66,7 @@ config VIDEO_ZORAN_LML33R10 config VIDEO_ZORAN_AVS6EYES tristate "AverMedia 6 Eyes support (EXPERIMENTAL)" - depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1 + depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO -- cgit v1.2.3-59-g8ed1b From 107063c6156a0cbf055e771baafc28a3e3c0fb9b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 18 Feb 2009 17:26:06 -0300 Subject: V4L/DVB (10714): zoran et al: convert zoran i2c modules to V4L2. The zoran i2c modules were still using V4L1 internally. Replace this with V4L2. Also deleted saa7111.c and saa7114.c, we use saa7115.c instead. Signed-off-by: Hans Verkuil [mchehab@redhat.com: fix v4l2_ctrl_query_fill_std merge conflict] Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 28 +- drivers/media/video/Makefile | 2 - drivers/media/video/adv7170.c | 74 +-- drivers/media/video/adv7175.c | 81 +-- drivers/media/video/bt819.c | 271 ++++---- drivers/media/video/bt856.c | 92 +-- drivers/media/video/bt866.c | 67 +- drivers/media/video/ks0127.c | 152 ++--- drivers/media/video/saa7110.c | 210 +++--- drivers/media/video/saa7111.c | 492 -------------- drivers/media/video/saa7114.c | 1068 ------------------------------ drivers/media/video/saa7185.c | 78 +-- drivers/media/video/vpx3220.c | 232 ++++--- drivers/media/video/zoran/Kconfig | 4 +- drivers/media/video/zoran/zoran.h | 6 +- drivers/media/video/zoran/zoran_card.c | 60 +- drivers/media/video/zoran/zoran_device.c | 61 +- drivers/media/video/zoran/zoran_driver.c | 220 ++---- 18 files changed, 636 insertions(+), 2562 deletions(-) delete mode 100644 drivers/media/video/saa7111.c delete mode 100644 drivers/media/video/saa7114.c (limited to 'drivers/media/video/zoran/Kconfig') diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3e4ce4aade3e..bb7df8c18b03 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -307,38 +307,18 @@ config VIDEO_TCM825X config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" - depends on VIDEO_V4L1 && I2C + depends on VIDEO_V4L2 && I2C ---help--- Support for the Philips SAA7110 video decoders. To compile this driver as a module, choose M here: the module will be called saa7110. -config VIDEO_SAA7111 - tristate "Philips SAA7111 video decoder" - depends on VIDEO_V4L1 && I2C - ---help--- - Support for the Philips SAA711 video decoder. - - To compile this driver as a module, choose M here: the - module will be called saa7111. - -config VIDEO_SAA7114 - tristate "Philips SAA7114 video decoder" - depends on VIDEO_V4L1 && I2C - ---help--- - Support for the Philips SAA7114 video decoder. This driver - is used only on Zoran driver and should be moved soon to - SAA711x module. - - To compile this driver as a module, choose M here: the - module will be called saa7114. - config VIDEO_SAA711X - tristate "Philips SAA7113/4/5 video decoders" + tristate "Philips SAA7111/3/4/5 video decoders" depends on VIDEO_V4L2 && I2C ---help--- - Support for the Philips SAA7113/4/5 video decoders. + Support for the Philips SAA7111/3/4/5 video decoders. To compile this driver as a module, choose M here: the module will be called saa7115. @@ -639,7 +619,7 @@ config VIDEO_MXB depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER - select VIDEO_SAA7115 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 6e2c69569f97..307490ebc230 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -43,8 +43,6 @@ obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o -obj-$(CONFIG_VIDEO_SAA7111) += saa7111.o -obj-$(CONFIG_VIDEO_SAA7114) += saa7114.o obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c index e0eb4f321442..ebafe78cb4c0 100644 --- a/drivers/media/video/adv7170.c +++ b/drivers/media/video/adv7170.c @@ -52,9 +52,8 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct adv7170 { unsigned char reg[128]; - int norm; + v4l2_std_id norm; int input; - int enable; int bright; int contrast; int hue; @@ -62,7 +61,6 @@ struct adv7170 { }; static char *inputs[] = { "pass_through", "play_back" }; -static char *norms[] = { "PAL", "NTSC" }; /* ----------------------------------------------------------------------- */ @@ -191,7 +189,7 @@ static int adv7170_command(struct i2c_client *client, unsigned cmd, void *arg) struct adv7170 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: + case VIDIOC_INT_INIT: #if 0 /* This is just for testing!!! */ adv7170_write_block(client, init_common, @@ -201,63 +199,47 @@ static int adv7170_command(struct i2c_client *client, unsigned cmd, void *arg) #endif break; - case ENCODER_GET_CAPABILITIES: + case VIDIOC_INT_S_STD_OUTPUT: { - struct video_encoder_capability *cap = arg; + v4l2_std_id iarg = *(v4l2_std_id *) arg; - cap->flags = VIDEO_ENCODER_PAL | - VIDEO_ENCODER_NTSC; - cap->inputs = 2; - cap->outputs = 1; - break; - } - - case ENCODER_SET_NORM: - { - int iarg = *(int *) arg; - - v4l_dbg(1, debug, client, "set norm %d\n", iarg); + v4l_dbg(1, debug, client, "set norm %llx\n", iarg); - switch (iarg) { - case VIDEO_MODE_NTSC: + if (iarg & V4L2_STD_NTSC) { adv7170_write_block(client, init_NTSC, sizeof(init_NTSC)); if (encoder->input == 0) adv7170_write(client, 0x02, 0x0e); // Enable genlock adv7170_write(client, 0x07, TR0MODE | TR0RST); adv7170_write(client, 0x07, TR0MODE); - break; - - case VIDEO_MODE_PAL: + } else if (iarg & V4L2_STD_PAL) { adv7170_write_block(client, init_PAL, sizeof(init_PAL)); if (encoder->input == 0) adv7170_write(client, 0x02, 0x0e); // Enable genlock adv7170_write(client, 0x07, TR0MODE | TR0RST); adv7170_write(client, 0x07, TR0MODE); - break; - - default: - v4l_dbg(1, debug, client, "illegal norm: %d\n", iarg); + } else { + v4l_dbg(1, debug, client, "illegal norm: %llx\n", iarg); return -EINVAL; } - v4l_dbg(1, debug, client, "switched to %s\n", norms[iarg]); + v4l_dbg(1, debug, client, "switched to %llx\n", iarg); encoder->norm = iarg; break; } - case ENCODER_SET_INPUT: + case VIDIOC_INT_S_VIDEO_ROUTING: { - int iarg = *(int *) arg; + struct v4l2_routing *route = arg; /* RJ: *iarg = 0: input is from decoder *iarg = 1: input is from ZR36060 *iarg = 2: color bar */ v4l_dbg(1, debug, client, "set input from %s\n", - iarg == 0 ? "decoder" : "ZR36060"); + route->input == 0 ? "decoder" : "ZR36060"); - switch (iarg) { + switch (route->input) { case 0: adv7170_write(client, 0x01, 0x20); adv7170_write(client, 0x08, TR1CAPT); /* TR1 */ @@ -277,30 +259,11 @@ static int adv7170_command(struct i2c_client *client, unsigned cmd, void *arg) break; default: - v4l_dbg(1, debug, client, "illegal input: %d\n", iarg); - return -EINVAL; - } - v4l_dbg(1, debug, client, "switched to %s\n", inputs[iarg]); - encoder->input = iarg; - break; - } - - case ENCODER_SET_OUTPUT: - { - int *iarg = arg; - - /* not much choice of outputs */ - if (*iarg != 0) { + v4l_dbg(1, debug, client, "illegal input: %d\n", route->input); return -EINVAL; } - break; - } - - case ENCODER_ENABLE_OUTPUT: - { - int *iarg = arg; - - encoder->enable = !!*iarg; + v4l_dbg(1, debug, client, "switched to %s\n", inputs[route->input]); + encoder->input = route->input; break; } @@ -337,9 +300,8 @@ static int adv7170_probe(struct i2c_client *client, encoder = kzalloc(sizeof(struct adv7170), GFP_KERNEL); if (encoder == NULL) return -ENOMEM; - encoder->norm = VIDEO_MODE_NTSC; + encoder->norm = V4L2_STD_NTSC; encoder->input = 0; - encoder->enable = 1; i2c_set_clientdata(client, encoder); i = adv7170_write_block(client, init_NTSC, sizeof(init_NTSC)); diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index 6008e84653f1..154dff03a7d8 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -46,9 +46,8 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); /* ----------------------------------------------------------------------- */ struct adv7175 { - int norm; + v4l2_std_id norm; int input; - int enable; int bright; int contrast; int hue; @@ -59,7 +58,6 @@ struct adv7175 { #define I2C_ADV7176 0x54 static char *inputs[] = { "pass_through", "play_back", "color_bar" }; -static char *norms[] = { "PAL", "NTSC", "SECAM->PAL (may not work!)" }; /* ----------------------------------------------------------------------- */ @@ -189,7 +187,7 @@ static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) struct adv7175 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: + case VIDIOC_INT_INIT: /* This is just for testing!!! */ adv7175_write_block(client, init_common, sizeof(init_common)); @@ -197,42 +195,25 @@ static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) adv7175_write(client, 0x07, TR0MODE); break; - case ENCODER_GET_CAPABILITIES: + case VIDIOC_INT_S_STD_OUTPUT: { - struct video_encoder_capability *cap = arg; + v4l2_std_id iarg = *(v4l2_std_id *) arg; - cap->flags = VIDEO_ENCODER_PAL | - VIDEO_ENCODER_NTSC | - VIDEO_ENCODER_SECAM; /* well, hacky */ - cap->inputs = 2; - cap->outputs = 1; - break; - } - - case ENCODER_SET_NORM: - { - int iarg = *(int *) arg; - - switch (iarg) { - case VIDEO_MODE_NTSC: + if (iarg & V4L2_STD_NTSC) { adv7175_write_block(client, init_ntsc, sizeof(init_ntsc)); if (encoder->input == 0) adv7175_write(client, 0x0d, 0x4f); // Enable genlock adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - break; - - case VIDEO_MODE_PAL: + } else if (iarg & V4L2_STD_PAL) { adv7175_write_block(client, init_pal, sizeof(init_pal)); if (encoder->input == 0) adv7175_write(client, 0x0d, 0x4f); // Enable genlock adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - break; - - case VIDEO_MODE_SECAM: // WARNING! ADV7176 does not support SECAM. + } else if (iarg & V4L2_STD_SECAM) { /* This is an attempt to convert * SECAM->PAL (typically it does not work * due to genlock: when decoder is in SECAM @@ -245,33 +226,32 @@ static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) adv7175_write(client, 0x0d, 0x49); // Disable genlock adv7175_write(client, 0x07, TR0MODE | TR0RST); adv7175_write(client, 0x07, TR0MODE); - break; - default: - v4l_dbg(1, debug, client, "illegal norm: %d\n", iarg); + } else { + v4l_dbg(1, debug, client, "illegal norm: %llx\n", iarg); return -EINVAL; } - v4l_dbg(1, debug, client, "switched to %s\n", norms[iarg]); + v4l_dbg(1, debug, client, "switched to %llx\n", iarg); encoder->norm = iarg; break; } - case ENCODER_SET_INPUT: + case VIDIOC_INT_S_VIDEO_ROUTING: { - int iarg = *(int *) arg; + struct v4l2_routing *route = arg; /* RJ: *iarg = 0: input is from SAA7110 *iarg = 1: input is from ZR36060 *iarg = 2: color bar */ - switch (iarg) { + switch (route->input) { case 0: adv7175_write(client, 0x01, 0x00); - if (encoder->norm == VIDEO_MODE_NTSC) + if (encoder->norm & V4L2_STD_NTSC) set_subcarrier_freq(client, 1); adv7175_write(client, 0x0c, TR1CAPT); /* TR1 */ - if (encoder->norm == VIDEO_MODE_SECAM) + if (encoder->norm & V4L2_STD_SECAM) adv7175_write(client, 0x0d, 0x49); // Disable genlock else adv7175_write(client, 0x0d, 0x4f); // Enable genlock @@ -283,7 +263,7 @@ static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) case 1: adv7175_write(client, 0x01, 0x00); - if (encoder->norm == VIDEO_MODE_NTSC) + if (encoder->norm & V4L2_STD_NTSC) set_subcarrier_freq(client, 0); adv7175_write(client, 0x0c, TR1PLAY); /* TR1 */ @@ -296,7 +276,7 @@ static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) case 2: adv7175_write(client, 0x01, 0x80); - if (encoder->norm == VIDEO_MODE_NTSC) + if (encoder->norm & V4L2_STD_NTSC) set_subcarrier_freq(client, 0); adv7175_write(client, 0x0d, 0x49); @@ -306,29 +286,11 @@ static int adv7175_command(struct i2c_client *client, unsigned cmd, void *arg) break; default: - v4l_dbg(1, debug, client, "illegal input: %d\n", iarg); + v4l_dbg(1, debug, client, "illegal input: %d\n", route->input); return -EINVAL; } - v4l_dbg(1, debug, client, "switched to %s\n", inputs[iarg]); - encoder->input = iarg; - break; - } - - case ENCODER_SET_OUTPUT: - { - int *iarg = arg; - - /* not much choice of outputs */ - if (*iarg != 0) - return -EINVAL; - break; - } - - case ENCODER_ENABLE_OUTPUT: - { - int *iarg = arg; - - encoder->enable = !!*iarg; + v4l_dbg(1, debug, client, "switched to %s\n", inputs[route->input]); + encoder->input = route->input; break; } @@ -369,9 +331,8 @@ static int adv7175_probe(struct i2c_client *client, encoder = kzalloc(sizeof(struct adv7175), GFP_KERNEL); if (encoder == NULL) return -ENOMEM; - encoder->norm = VIDEO_MODE_PAL; + encoder->norm = V4L2_STD_NTSC; encoder->input = 0; - encoder->enable = 1; i2c_set_clientdata(client, encoder); i = adv7175_write_block(client, init_common, sizeof(init_common)); diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c index a07b7b88e5b8..b8109a1b50ce 100644 --- a/drivers/media/video/bt819.c +++ b/drivers/media/video/bt819.c @@ -54,7 +54,7 @@ struct bt819 { unsigned char reg[32]; int initialized; - int norm; + v4l2_std_id norm; int input; int enable; int bright; @@ -178,7 +178,7 @@ static int bt819_init(struct i2c_client *client) 0x1a, 0x80, /* 0x1a ADC Interface */ }; - struct timing *timing = &timing_data[decoder->norm]; + struct timing *timing = &timing_data[(decoder->norm & V4L2_STD_525_60) ? 1 : 0]; init[0x03 * 2 - 1] = (((timing->vdelay >> 8) & 0x03) << 6) | @@ -192,7 +192,7 @@ static int bt819_init(struct i2c_client *client) init[0x08 * 2 - 1] = timing->hscale >> 8; init[0x09 * 2 - 1] = timing->hscale & 0xff; /* 0x15 in array is address 0x19 */ - init[0x15 * 2 - 1] = (decoder->norm == 0) ? 115 : 93; /* Chroma burst delay */ + init[0x15 * 2 - 1] = (decoder->norm & V4L2_STD_625_50) ? 115 : 93; /* Chroma burst delay */ /* reset */ bt819_write(client, 0x1f, 0x00); mdelay(1); @@ -215,121 +215,93 @@ static int bt819_command(struct i2c_client *client, unsigned cmd, void *arg) } switch (cmd) { - case 0: + case VIDIOC_INT_INIT: /* This is just for testing!!! */ bt819_init(client); break; - case DECODER_GET_CAPABILITIES: - { - struct video_decoder_capability *cap = arg; - - cap->flags = VIDEO_DECODER_PAL | - VIDEO_DECODER_NTSC | - VIDEO_DECODER_AUTO | - VIDEO_DECODER_CCIR; - cap->inputs = 8; - cap->outputs = 1; - break; - } - - case DECODER_GET_STATUS: - { + case VIDIOC_QUERYSTD: + case VIDIOC_INT_G_INPUT_STATUS: { int *iarg = arg; + v4l2_std_id *istd = arg; int status; - int res; + int res = V4L2_IN_ST_NO_SIGNAL; + v4l2_std_id std; status = bt819_read(client, 0x00); - res = 0; if ((status & 0x80)) - res |= DECODER_STATUS_GOOD; + res = 0; - switch (decoder->norm) { - case VIDEO_MODE_NTSC: - res |= DECODER_STATUS_NTSC; - break; - case VIDEO_MODE_PAL: - res |= DECODER_STATUS_PAL; - break; - default: - case VIDEO_MODE_AUTO: - if ((status & 0x10)) - res |= DECODER_STATUS_PAL; - else - res |= DECODER_STATUS_NTSC; - break; - } - res |= DECODER_STATUS_COLOR; - *iarg = res; + if ((status & 0x10)) + std = V4L2_STD_PAL; + else + std = V4L2_STD_NTSC; + if (cmd == VIDIOC_QUERYSTD) + *istd = std; + else + *iarg = res; v4l_dbg(1, debug, client, "get status %x\n", *iarg); break; } - case DECODER_SET_NORM: + case VIDIOC_S_STD: { - int *iarg = arg; + v4l2_std_id *iarg = arg; struct timing *timing = NULL; - v4l_dbg(1, debug, client, "set norm %x\n", *iarg); + v4l_dbg(1, debug, client, "set norm %llx\n", *iarg); - switch (*iarg) { - case VIDEO_MODE_NTSC: + if (*iarg & V4L2_STD_NTSC) { bt819_setbit(client, 0x01, 0, 1); bt819_setbit(client, 0x01, 1, 0); bt819_setbit(client, 0x01, 5, 0); bt819_write(client, 0x18, 0x68); bt819_write(client, 0x19, 0x5d); /* bt819_setbit(client, 0x1a, 5, 1); */ - timing = &timing_data[VIDEO_MODE_NTSC]; - break; - case VIDEO_MODE_PAL: + timing = &timing_data[1]; + } else if (*iarg & V4L2_STD_PAL) { bt819_setbit(client, 0x01, 0, 1); bt819_setbit(client, 0x01, 1, 1); bt819_setbit(client, 0x01, 5, 1); bt819_write(client, 0x18, 0x7f); bt819_write(client, 0x19, 0x72); /* bt819_setbit(client, 0x1a, 5, 0); */ - timing = &timing_data[VIDEO_MODE_PAL]; - break; - case VIDEO_MODE_AUTO: - bt819_setbit(client, 0x01, 0, 0); - bt819_setbit(client, 0x01, 1, 0); - break; - default: - v4l_dbg(1, debug, client, "unsupported norm %x\n", *iarg); + timing = &timing_data[0]; + } else { + v4l_dbg(1, debug, client, "unsupported norm %llx\n", *iarg); return -EINVAL; } - - if (timing) { - bt819_write(client, 0x03, - (((timing->vdelay >> 8) & 0x03) << 6) | - (((timing->vactive >> 8) & 0x03) << 4) | - (((timing->hdelay >> 8) & 0x03) << 2) | - ((timing->hactive >> 8) & 0x03) ); - bt819_write(client, 0x04, timing->vdelay & 0xff); - bt819_write(client, 0x05, timing->vactive & 0xff); - bt819_write(client, 0x06, timing->hdelay & 0xff); - bt819_write(client, 0x07, timing->hactive & 0xff); - bt819_write(client, 0x08, (timing->hscale >> 8) & 0xff); - bt819_write(client, 0x09, timing->hscale & 0xff); - } - +/* case VIDEO_MODE_AUTO: + bt819_setbit(client, 0x01, 0, 0); + bt819_setbit(client, 0x01, 1, 0);*/ + + bt819_write(client, 0x03, + (((timing->vdelay >> 8) & 0x03) << 6) | + (((timing->vactive >> 8) & 0x03) << 4) | + (((timing->hdelay >> 8) & 0x03) << 2) | + ((timing->hactive >> 8) & 0x03)); + bt819_write(client, 0x04, timing->vdelay & 0xff); + bt819_write(client, 0x05, timing->vactive & 0xff); + bt819_write(client, 0x06, timing->hdelay & 0xff); + bt819_write(client, 0x07, timing->hactive & 0xff); + bt819_write(client, 0x08, (timing->hscale >> 8) & 0xff); + bt819_write(client, 0x09, timing->hscale & 0xff); decoder->norm = *iarg; break; } - case DECODER_SET_INPUT: + case VIDIOC_INT_S_VIDEO_ROUTING: { - int *iarg = arg; + struct v4l2_routing *route = arg; - v4l_dbg(1, debug, client, "set input %x\n", *iarg); + v4l_dbg(1, debug, client, "set input %x\n", route->input); - if (*iarg < 0 || *iarg > 7) + if (route->input < 0 || route->input > 7) return -EINVAL; - if (decoder->input != *iarg) { - decoder->input = *iarg; + if (decoder->input != route->input) { + decoder->input = route->input; /* select mode */ if (decoder->input == 0) { bt819_setbit(client, 0x0b, 6, 0); @@ -342,75 +314,116 @@ static int bt819_command(struct i2c_client *client, unsigned cmd, void *arg) break; } - case DECODER_SET_OUTPUT: + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: { - int *iarg = arg; + int enable = cmd == VIDIOC_STREAMON; - v4l_dbg(1, debug, client, "set output %x\n", *iarg); + v4l_dbg(1, debug, client, "enable output %x\n", enable); - /* not much choice of outputs */ - if (*iarg != 0) - return -EINVAL; + if (decoder->enable != enable) { + decoder->enable = enable; + bt819_setbit(client, 0x16, 7, !enable); + } break; } - case DECODER_ENABLE_OUTPUT: + case VIDIOC_QUERYCTRL: { - int *iarg = arg; - int enable = (*iarg != 0); + struct v4l2_queryctrl *qc = arg; - v4l_dbg(1, debug, client, "enable output %x\n", *iarg); + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); + break; - if (decoder->enable != enable) { - decoder->enable = enable; - bt819_setbit(client, 0x16, 7, !enable); + case V4L2_CID_CONTRAST: + v4l2_ctrl_query_fill(qc, 0, 511, 1, 256); + break; + + case V4L2_CID_SATURATION: + v4l2_ctrl_query_fill(qc, 0, 511, 1, 256); + break; + + case V4L2_CID_HUE: + v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); + break; + + default: + return -EINVAL; } break; } - case DECODER_SET_PICTURE: + case VIDIOC_S_CTRL: { - struct video_picture *pic = arg; + struct v4l2_control *ctrl = arg; - v4l_dbg(1, debug, client, - "set picture brightness %d contrast %d colour %d\n", - pic->brightness, pic->contrast, pic->colour); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (decoder->bright != ctrl->value) { + decoder->bright = ctrl->value; + bt819_write(client, 0x0a, decoder->bright); + } + break; + case V4L2_CID_CONTRAST: + if (decoder->contrast != ctrl->value) { + decoder->contrast = ctrl->value; + bt819_write(client, 0x0c, + decoder->contrast & 0xff); + bt819_setbit(client, 0x0b, 2, + ((decoder->contrast >> 8) & 0x01)); + } + break; - if (decoder->bright != pic->brightness) { - /* We want -128 to 127 we get 0-65535 */ - decoder->bright = pic->brightness; - bt819_write(client, 0x0a, - (decoder->bright >> 8) - 128); - } + case V4L2_CID_SATURATION: + if (decoder->sat != ctrl->value) { + decoder->sat = ctrl->value; + bt819_write(client, 0x0d, + (decoder->sat >> 7) & 0xff); + bt819_setbit(client, 0x0b, 1, + ((decoder->sat >> 15) & 0x01)); + + /* Ratio between U gain and V gain must stay the same as + the ratio between the default U and V gain values. */ + temp = (decoder->sat * 180) / 254; + bt819_write(client, 0x0e, (temp >> 7) & 0xff); + bt819_setbit(client, 0x0b, 0, (temp >> 15) & 0x01); + } + break; - if (decoder->contrast != pic->contrast) { - /* We want 0 to 511 we get 0-65535 */ - decoder->contrast = pic->contrast; - bt819_write(client, 0x0c, - (decoder->contrast >> 7) & 0xff); - bt819_setbit(client, 0x0b, 2, - ((decoder->contrast >> 15) & 0x01)); + case V4L2_CID_HUE: + if (decoder->hue != ctrl->value) { + decoder->hue = ctrl->value; + bt819_write(client, 0x0f, decoder->hue); + } + break; + default: + return -EINVAL; } + break; + } - if (decoder->sat != pic->colour) { - /* We want 0 to 511 we get 0-65535 */ - decoder->sat = pic->colour; - bt819_write(client, 0x0d, - (decoder->sat >> 7) & 0xff); - bt819_setbit(client, 0x0b, 1, - ((decoder->sat >> 15) & 0x01)); - - temp = (decoder->sat * 201) / 237; - bt819_write(client, 0x0e, (temp >> 7) & 0xff); - bt819_setbit(client, 0x0b, 0, (temp >> 15) & 0x01); - } + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; - if (decoder->hue != pic->hue) { - /* We want -128 to 127 we get 0-65535 */ - decoder->hue = pic->hue; - bt819_write(client, 0x0f, - 128 - (decoder->hue >> 8)); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = decoder->bright; + break; + case V4L2_CID_CONTRAST: + ctrl->value = decoder->contrast; + break; + case V4L2_CID_SATURATION: + ctrl->value = decoder->sat; + break; + case V4L2_CID_HUE: + ctrl->value = decoder->hue; + break; + default: + return -EINVAL; } break; } @@ -462,13 +475,13 @@ static int bt819_probe(struct i2c_client *client, decoder = kzalloc(sizeof(struct bt819), GFP_KERNEL); if (decoder == NULL) return -ENOMEM; - decoder->norm = VIDEO_MODE_NTSC; + decoder->norm = V4L2_STD_NTSC; decoder->input = 0; decoder->enable = 1; - decoder->bright = 32768; - decoder->contrast = 32768; - decoder->hue = 32768; - decoder->sat = 32768; + decoder->bright = 0; + decoder->contrast = 0xd8; /* 100% of original signal */ + decoder->hue = 0; + decoder->sat = 0xfe; /* 100% of original signal */ decoder->initialized = 0; i2c_set_clientdata(client, decoder); diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c index 4213867507f8..3e042c5ddaa7 100644 --- a/drivers/media/video/bt856.c +++ b/drivers/media/video/bt856.c @@ -55,8 +55,7 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct bt856 { unsigned char reg[BT856_NR_REG]; - int norm; - int enable; + v4l2_std_id norm; }; /* ----------------------------------------------------------------------- */ @@ -96,7 +95,7 @@ static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg) struct bt856 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: + case VIDIOC_INT_INIT: /* This is just for testing!!! */ v4l_dbg(1, debug, client, "init\n"); bt856_write(client, 0xdc, 0x18); @@ -107,15 +106,10 @@ static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg) //bt856_setbit(client, 0xdc, 6, 0); bt856_setbit(client, 0xdc, 4, 1); - switch (encoder->norm) { - case VIDEO_MODE_NTSC: + if (encoder->norm & V4L2_STD_NTSC) bt856_setbit(client, 0xdc, 2, 0); - break; - - case VIDEO_MODE_PAL: + else bt856_setbit(client, 0xdc, 2, 1); - break; - } bt856_setbit(client, 0xdc, 1, 1); bt856_setbit(client, 0xde, 4, 0); @@ -124,38 +118,19 @@ static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg) bt856_dump(client); break; - case ENCODER_GET_CAPABILITIES: + case VIDIOC_INT_S_STD_OUTPUT: { - struct video_encoder_capability *cap = arg; - - v4l_dbg(1, debug, client, "get capabilities\n"); + v4l2_std_id *iarg = arg; - cap->flags = VIDEO_ENCODER_PAL | - VIDEO_ENCODER_NTSC | - VIDEO_ENCODER_CCIR; - cap->inputs = 2; - cap->outputs = 1; - break; - } - - case ENCODER_SET_NORM: - { - int *iarg = arg; + v4l_dbg(1, debug, client, "set norm %llx\n", *iarg); - v4l_dbg(1, debug, client, "set norm %d\n", *iarg); - - switch (*iarg) { - case VIDEO_MODE_NTSC: + if (*iarg & V4L2_STD_NTSC) { bt856_setbit(client, 0xdc, 2, 0); - break; - - case VIDEO_MODE_PAL: + } else if (*iarg & V4L2_STD_PAL) { bt856_setbit(client, 0xdc, 2, 1); bt856_setbit(client, 0xda, 0, 0); //bt856_setbit(client, 0xda, 0, 1); - break; - - default: + } else { return -EINVAL; } encoder->norm = *iarg; @@ -164,16 +139,16 @@ static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg) break; } - case ENCODER_SET_INPUT: + case VIDIOC_INT_S_VIDEO_ROUTING: { - int *iarg = arg; + struct v4l2_routing *route = arg; - v4l_dbg(1, debug, client, "set input %d\n", *iarg); + v4l_dbg(1, debug, client, "set input %d\n", route->input); /* We only have video bus. - * iarg = 0: input is from bt819 - * iarg = 1: input is from ZR36060 */ - switch (*iarg) { + * route->input= 0: input is from bt819 + * route->input= 1: input is from ZR36060 */ + switch (route->input) { case 0: bt856_setbit(client, 0xde, 4, 0); bt856_setbit(client, 0xde, 3, 1); @@ -199,28 +174,6 @@ static int bt856_command(struct i2c_client *client, unsigned cmd, void *arg) break; } - case ENCODER_SET_OUTPUT: - { - int *iarg = arg; - - v4l_dbg(1, debug, client, "set output %d\n", *iarg); - - /* not much choice of outputs */ - if (*iarg != 0) - return -EINVAL; - break; - } - - case ENCODER_ENABLE_OUTPUT: - { - int *iarg = arg; - - encoder->enable = !!*iarg; - - v4l_dbg(1, debug, client, "enable output %d\n", encoder->enable); - break; - } - default: return -EINVAL; } @@ -249,8 +202,7 @@ static int bt856_probe(struct i2c_client *client, encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL); if (encoder == NULL) return -ENOMEM; - encoder->norm = VIDEO_MODE_NTSC; - encoder->enable = 1; + encoder->norm = V4L2_STD_NTSC; i2c_set_clientdata(client, encoder); bt856_write(client, 0xdc, 0x18); @@ -261,16 +213,10 @@ static int bt856_probe(struct i2c_client *client, //bt856_setbit(client, 0xdc, 6, 0); bt856_setbit(client, 0xdc, 4, 1); - switch (encoder->norm) { - - case VIDEO_MODE_NTSC: + if (encoder->norm & V4L2_STD_NTSC) bt856_setbit(client, 0xdc, 2, 0); - break; - - case VIDEO_MODE_PAL: + else bt856_setbit(client, 0xdc, 2, 1); - break; - } bt856_setbit(client, 0xdc, 1, 1); bt856_setbit(client, 0xde, 4, 0); diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index 596f9e2376be..1df24c8776f3 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -52,8 +52,7 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct bt866 { u8 reg[256]; - int norm; - int enable; + v4l2_std_id norm; int bright; int contrast; int hue; @@ -94,44 +93,21 @@ static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) struct bt866 *encoder = i2c_get_clientdata(client); switch (cmd) { - case ENCODER_GET_CAPABILITIES: + case VIDIOC_INT_S_STD_OUTPUT: { - struct video_encoder_capability *cap = arg; + v4l2_std_id *iarg = arg; - v4l_dbg(1, debug, client, "get capabilities\n"); + v4l_dbg(1, debug, client, "set norm %llx\n", *iarg); - cap->flags - = VIDEO_ENCODER_PAL - | VIDEO_ENCODER_NTSC - | VIDEO_ENCODER_CCIR; - cap->inputs = 2; - cap->outputs = 1; - break; - } - - case ENCODER_SET_NORM: - { - int *iarg = arg; - - v4l_dbg(1, debug, client, "set norm %d\n", *iarg); - - switch (*iarg) { - case VIDEO_MODE_NTSC: - break; - - case VIDEO_MODE_PAL: - break; - - default: + if (!(*iarg & (V4L2_STD_NTSC | V4L2_STD_PAL))) return -EINVAL; - } encoder->norm = *iarg; break; } - case ENCODER_SET_INPUT: + case VIDIOC_INT_S_VIDEO_ROUTING: { - int *iarg = arg; + struct v4l2_routing *route = arg; static const __u8 init[] = { 0xc8, 0xcc, /* CRSCALE */ 0xca, 0x91, /* CBSCALE */ @@ -167,7 +143,7 @@ static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) val = encoder->reg[0xdc]; - if (*iarg == 0) + if (route->input == 0) val |= 0x40; /* CBSWAP */ else val &= ~0x40; /* !CBSWAP */ @@ -175,15 +151,15 @@ static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) bt866_write(client, 0xdc, val); val = encoder->reg[0xcc]; - if (*iarg == 2) + if (route->input == 2) val |= 0x01; /* OSDBAR */ else val &= ~0x01; /* !OSDBAR */ bt866_write(client, 0xcc, val); - v4l_dbg(1, debug, client, "set input %d\n", *iarg); + v4l_dbg(1, debug, client, "set input %d\n", route->input); - switch (*iarg) { + switch (route->input) { case 0: break; case 1: @@ -194,27 +170,6 @@ static int bt866_command(struct i2c_client *client, unsigned cmd, void *arg) break; } - case ENCODER_SET_OUTPUT: - { - int *iarg = arg; - - v4l_dbg(1, debug, client, "set output %d\n", *iarg); - - /* not much choice of outputs */ - if (*iarg != 0) - return -EINVAL; - break; - } - - case ENCODER_ENABLE_OUTPUT: - { - int *iarg = arg; - encoder->enable = !!*iarg; - - v4l_dbg(1, debug, client, "enable output %d\n", encoder->enable); - break; - } - case 4711: { int *iarg = arg; diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c index bae2d2beb709..c97d55a43c07 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/video/ks0127.c @@ -201,7 +201,7 @@ struct ks0127 { int format_height; int cap_width; int cap_height; - int norm; + v4l2_std_id norm; int ks_type; u8 regs[256]; }; @@ -408,20 +408,22 @@ static void ks0127_reset(struct i2c_client *c) static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) { struct ks0127 *ks = i2c_get_clientdata(c); + struct v4l2_routing *route = arg; int *iarg = (int *)arg; + v4l2_std_id *istd = arg; int status; if (!ks) return -ENODEV; switch (cmd) { - case DECODER_INIT: - v4l_dbg(1, debug, c, "DECODER_INIT\n"); + case VIDIOC_INT_INIT: + v4l_dbg(1, debug, c, "VIDIOC_INT_INIT\n"); ks0127_reset(c); break; - case DECODER_SET_INPUT: - switch(*iarg) { + case VIDIOC_INT_S_VIDEO_ROUTING: + switch (route->input) { case KS_INPUT_COMPOSITE_1: case KS_INPUT_COMPOSITE_2: case KS_INPUT_COMPOSITE_3: @@ -429,7 +431,7 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) case KS_INPUT_COMPOSITE_5: case KS_INPUT_COMPOSITE_6: v4l_dbg(1, debug, c, - "DECODER_SET_INPUT %d: Composite\n", *iarg); + "VIDIOC_S_INPUT %d: Composite\n", *iarg); /* autodetect 50/60 Hz */ ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); /* VSE=0 */ @@ -463,7 +465,7 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) case KS_INPUT_SVIDEO_2: case KS_INPUT_SVIDEO_3: v4l_dbg(1, debug, c, - "DECODER_SET_INPUT %d: S-Video\n", *iarg); + "VIDIOC_S_INPUT %d: S-Video\n", *iarg); /* autodetect 50/60 Hz */ ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); /* VSE=0 */ @@ -495,9 +497,8 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) case KS_INPUT_YUV656: v4l_dbg(1, debug, c, - "DECODER_SET_INPUT 15: YUV656\n"); - if (ks->norm == VIDEO_MODE_NTSC || - ks->norm == KS_STD_PAL_M) + "VIDIOC_S_INPUT 15: YUV656\n"); + if (ks->norm & V4L2_STD_525_60) /* force 60 Hz */ ks0127_and_or(c, KS_CMDA, 0xfc, 0x03); else @@ -541,7 +542,7 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) default: v4l_dbg(1, debug, c, - "DECODER_SET_INPUT: Unknown input %d\n", *iarg); + "VIDIOC_INT_S_VIDEO_ROUTING: Unknown input %d\n", route->input); break; } @@ -550,77 +551,37 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) ks0127_write(c, KS_DEMOD, reg_defaults[KS_DEMOD]); break; - case DECODER_SET_OUTPUT: - switch(*iarg) { - case KS_OUTPUT_YUV656E: - v4l_dbg(1, debug, c, - "DECODER_SET_OUTPUT: OUTPUT_YUV656E (Missing)\n"); - return -EINVAL; - - case KS_OUTPUT_EXV: - v4l_dbg(1, debug, c, - "DECODER_SET_OUTPUT: OUTPUT_EXV\n"); - ks0127_and_or(c, KS_OFMTA, 0xf0, 0x09); - break; - } - break; - - case DECODER_SET_NORM: /* sam This block mixes old and new norm names... */ + case VIDIOC_S_STD: /* sam This block mixes old and new norm names... */ /* Set to automatic SECAM/Fsc mode */ ks0127_and_or(c, KS_DEMOD, 0xf0, 0x00); - ks->norm = *iarg; - switch (*iarg) { - /* this is untested !! */ - /* It just detects PAL_N/NTSC_M (no special frequencies) */ - /* And you have to set the standard a second time afterwards */ - case VIDEO_MODE_AUTO: - v4l_dbg(1, debug, c, - "DECODER_SET_NORM: AUTO\n"); + ks->norm = *istd; - /* The chip determines the format */ - /* based on the current field rate */ - ks0127_and_or(c, KS_CMDA, 0xfc, 0x00); - ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); - /* This is wrong for PAL ! As I said, */ - /* you need to set the standard once again !! */ - ks->format_height = 240; - ks->format_width = 704; - break; - - case VIDEO_MODE_NTSC: + if (*istd & V4L2_STD_NTSC) { v4l_dbg(1, debug, c, - "DECODER_SET_NORM: NTSC_M\n"); + "VIDIOC_S_STD: NTSC_M\n"); ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); ks->format_height = 240; ks->format_width = 704; - break; - - case KS_STD_NTSC_N: + } else if (*istd & V4L2_STD_PAL_N) { v4l_dbg(1, debug, c, "KS0127_SET_NORM: NTSC_N (fixme)\n"); ks0127_and_or(c, KS_CHROMA, 0x9f, 0x40); ks->format_height = 240; ks->format_width = 704; - break; - - case VIDEO_MODE_PAL: + } else if (*istd & V4L2_STD_PAL) { v4l_dbg(1, debug, c, - "DECODER_SET_NORM: PAL_N\n"); + "VIDIOC_S_STD: PAL_N\n"); ks0127_and_or(c, KS_CHROMA, 0x9f, 0x20); ks->format_height = 290; ks->format_width = 704; - break; - - case KS_STD_PAL_M: + } else if (*istd & V4L2_STD_PAL_M) { v4l_dbg(1, debug, c, "KS0127_SET_NORM: PAL_M (fixme)\n"); ks0127_and_or(c, KS_CHROMA, 0x9f, 0x40); ks->format_height = 290; ks->format_width = 704; - break; - - case VIDEO_MODE_SECAM: + } else if (*istd & V4L2_STD_SECAM) { v4l_dbg(1, debug, c, "KS0127_SET_NORM: SECAM\n"); ks->format_height = 290; @@ -632,29 +593,34 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) schedule_timeout_interruptible(HZ/10+1); /* did it autodetect? */ - if (ks0127_read(c, KS_DEMOD) & 0x40) - break; - - /* force to secam mode */ - ks0127_and_or(c, KS_DEMOD, 0xf0, 0x0f); - break; - - default: + if (!(ks0127_read(c, KS_DEMOD) & 0x40)) + /* force to secam mode */ + ks0127_and_or(c, KS_DEMOD, 0xf0, 0x0f); + } else { v4l_dbg(1, debug, c, - "DECODER_SET_NORM: Unknown norm %d\n", *iarg); - break; + "VIDIOC_S_STD: Unknown norm %llx\n", *istd); } break; - case DECODER_SET_PICTURE: + case VIDIOC_QUERYCTRL: + { + return -EINVAL; + } + + case VIDIOC_S_CTRL: v4l_dbg(1, debug, c, - "DECODER_SET_PICTURE: not yet supported\n"); + "VIDIOC_S_CTRL: not yet supported\n"); return -EINVAL; - /* sam todo: KS0127_SET_BRIGHTNESS: Merge into DECODER_SET_PICTURE */ - /* sam todo: KS0127_SET_CONTRAST: Merge into DECODER_SET_PICTURE */ - /* sam todo: KS0127_SET_HUE: Merge into DECODER_SET_PICTURE? */ - /* sam todo: KS0127_SET_SATURATION: Merge into DECODER_SET_PICTURE */ + case VIDIOC_G_CTRL: + v4l_dbg(1, debug, c, + "VIDIOC_G_CTRL: not yet supported\n"); + return -EINVAL; + + /* sam todo: KS0127_SET_BRIGHTNESS: Merge into VIDIOC_S_CTRL */ + /* sam todo: KS0127_SET_CONTRAST: Merge into VIDIOC_S_CTRL */ + /* sam todo: KS0127_SET_HUE: Merge into VIDIOC_S_CTRL? */ + /* sam todo: KS0127_SET_SATURATION: Merge into VIDIOC_S_CTRL */ /* sam todo: KS0127_SET_AGC_MODE: */ /* sam todo: KS0127_SET_AGC: */ /* sam todo: KS0127_SET_CHROMA_MODE: */ @@ -670,22 +636,21 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) /* sam todo: KS0127_SET_UNUSEV: */ /* sam todo: KS0127_SET_VSALIGN_MODE: */ - case DECODER_ENABLE_OUTPUT: + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: { - int enable; + int enable = cmd == VIDIOC_STREAMON; - iarg = arg; - enable = (*iarg != 0); if (enable) { v4l_dbg(1, debug, c, - "DECODER_ENABLE_OUTPUT on\n"); + "VIDIOC_STREAMON\n"); /* All output pins on */ ks0127_and_or(c, KS_OFMTA, 0xcf, 0x30); /* Obey the OEN pin */ ks0127_and_or(c, KS_CDEM, 0x7f, 0x00); } else { v4l_dbg(1, debug, c, - "DECODER_ENABLE_OUTPUT off\n"); + "VIDIOC_STREAMOFF\n"); /* Video output pins off */ ks0127_and_or(c, KS_OFMTA, 0xcf, 0x00); /* Ignore the OEN pin */ @@ -699,19 +664,26 @@ static int ks0127_command(struct i2c_client *c, unsigned cmd, void *arg) /* sam todo: KS0127_SET_HEIGHT: */ /* sam todo: KS0127_SET_HSCALE: */ - case DECODER_GET_STATUS: - v4l_dbg(1, debug, c, "DECODER_GET_STATUS\n"); - *iarg = 0; + case VIDIOC_QUERYSTD: + case VIDIOC_INT_G_INPUT_STATUS: { + int stat = V4L2_IN_ST_NO_SIGNAL; + v4l2_std_id std = V4L2_STD_ALL; + v4l_dbg(1, debug, c, "VIDIOC_QUERYSTD/VIDIOC_INT_G_INPUT_STATUS\n"); status = ks0127_read(c, KS_STAT); if (!(status & 0x20)) /* NOVID not set */ - *iarg = (*iarg | DECODER_STATUS_GOOD); - if ((status & 0x01)) /* CLOCK set */ - *iarg = (*iarg | DECODER_STATUS_COLOR); + stat = 0; + if (!(status & 0x01)) /* CLOCK set */ + stat |= V4L2_IN_ST_NO_COLOR; if ((status & 0x08)) /* PALDET set */ - *iarg = (*iarg | DECODER_STATUS_PAL); + std = V4L2_STD_PAL; else - *iarg = (*iarg | DECODER_STATUS_NTSC); + std = V4L2_STD_NTSC; + if (cmd == VIDIOC_QUERYSTD) + *istd = std; + else + *iarg = stat; break; + } /* Catch any unknown command */ default: diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index 37860698f782..9ef6b2bb1b77 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -54,7 +54,7 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct saa7110 { u8 reg[SAA7110_NR_REG]; - int norm; + v4l2_std_id norm; int input; int enable; int bright; @@ -176,7 +176,7 @@ static const unsigned char initseq[1 + SAA7110_NR_REG] = { /* 0x30 */ 0x44, 0x71, 0x02, 0x8C, 0x02 }; -static int determine_norm(struct i2c_client *client) +static v4l2_std_id determine_norm(struct i2c_client *client) { DEFINE_WAIT(wait); struct saa7110 *decoder = i2c_get_clientdata(client); @@ -198,11 +198,11 @@ static int determine_norm(struct i2c_client *client) if (status & 0x20) { v4l_dbg(1, debug, client, "status=0x%02x (NTSC/no color)\n", status); //saa7110_write(client,0x2E,0x81); - return VIDEO_MODE_NTSC; + return V4L2_STD_NTSC; } v4l_dbg(1, debug, client, "status=0x%02x (PAL/no color)\n", status); //saa7110_write(client,0x2E,0x9A); - return VIDEO_MODE_PAL; + return V4L2_STD_PAL; } //saa7110_write(client,0x06,0x03); if (status & 0x20) { /* 60Hz */ @@ -211,7 +211,7 @@ static int determine_norm(struct i2c_client *client) saa7110_write(client, 0x0F, 0x50); saa7110_write(client, 0x11, 0x2C); //saa7110_write(client,0x2E,0x81); - return VIDEO_MODE_NTSC; + return V4L2_STD_NTSC; } /* 50Hz -> PAL/SECAM */ @@ -228,10 +228,10 @@ static int determine_norm(struct i2c_client *client) if ((status & 0x03) == 0x01) { v4l_dbg(1, debug, client, "status=0x%02x (SECAM)\n", status); saa7110_write(client, 0x0D, 0x87); - return VIDEO_MODE_SECAM; + return V4L2_STD_SECAM; } v4l_dbg(1, debug, client, "status=0x%02x (PAL)\n", status); - return VIDEO_MODE_PAL; + return V4L2_STD_PAL; } static int @@ -240,112 +240,81 @@ saa7110_command (struct i2c_client *client, void *arg) { struct saa7110 *decoder = i2c_get_clientdata(client); + struct v4l2_routing *route = arg; + v4l2_std_id std; int v; switch (cmd) { - case 0: + case VIDIOC_INT_INIT: //saa7110_write_block(client, initseq, sizeof(initseq)); break; - case DECODER_GET_CAPABILITIES: - { - struct video_decoder_capability *dc = arg; - - dc->flags = - VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC | - VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO; - dc->inputs = SAA7110_MAX_INPUT; - dc->outputs = SAA7110_MAX_OUTPUT; - break; - } - - case DECODER_GET_STATUS: + case VIDIOC_INT_G_INPUT_STATUS: { + int res = V4L2_IN_ST_NO_SIGNAL; int status; - int res = 0; status = saa7110_read(client); - v4l_dbg(1, debug, client, "status=0x%02x norm=%d\n", + v4l_dbg(1, debug, client, "status=0x%02x norm=%llx\n", status, decoder->norm); if (!(status & 0x40)) - res |= DECODER_STATUS_GOOD; - if (status & 0x03) - res |= DECODER_STATUS_COLOR; + res = 0; + if (!(status & 0x03)) + res |= V4L2_IN_ST_NO_COLOR; - switch (decoder->norm) { - case VIDEO_MODE_NTSC: - res |= DECODER_STATUS_NTSC; - break; - case VIDEO_MODE_PAL: - res |= DECODER_STATUS_PAL; - break; - case VIDEO_MODE_SECAM: - res |= DECODER_STATUS_SECAM; - break; - } *(int *) arg = res; break; } - case DECODER_SET_NORM: - v = *(int *) arg; - if (decoder->norm != v) { - decoder->norm = v; + case VIDIOC_QUERYSTD: + { + *(v4l2_std_id *)arg = determine_norm(client); + break; + } + + case VIDIOC_S_STD: + std = *(v4l2_std_id *) arg; + if (decoder->norm != std) { + decoder->norm = std; //saa7110_write(client, 0x06, 0x03); - switch (v) { - case VIDEO_MODE_NTSC: + if (std & V4L2_STD_NTSC) { saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x50); saa7110_write(client, 0x11, 0x2C); //saa7110_write(client, 0x2E, 0x81); v4l_dbg(1, debug, client, "switched to NTSC\n"); - break; - case VIDEO_MODE_PAL: + } else if (std & V4L2_STD_PAL) { saa7110_write(client, 0x0D, 0x86); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); //saa7110_write(client, 0x2E, 0x9A); v4l_dbg(1, debug, client, "switched to PAL\n"); - break; - case VIDEO_MODE_SECAM: + } else if (std & V4L2_STD_SECAM) { saa7110_write(client, 0x0D, 0x87); saa7110_write(client, 0x0F, 0x10); saa7110_write(client, 0x11, 0x59); //saa7110_write(client, 0x2E, 0x9A); v4l_dbg(1, debug, client, "switched to SECAM\n"); - break; - case VIDEO_MODE_AUTO: - v4l_dbg(1, debug, client, "switched to AUTO\n"); - decoder->norm = determine_norm(client); - *(int *) arg = decoder->norm; - break; - default: - return -EPERM; + } else { + return -EINVAL; } } break; - case DECODER_SET_INPUT: - v = *(int *) arg; - if (v < 0 || v >= SAA7110_MAX_INPUT) { - v4l_dbg(1, debug, client, "input=%d not available\n", v); + case VIDIOC_INT_S_VIDEO_ROUTING: + if (route->input < 0 || route->input >= SAA7110_MAX_INPUT) { + v4l_dbg(1, debug, client, "input=%d not available\n", route->input); return -EINVAL; } - if (decoder->input != v) { - saa7110_selmux(client, v); - v4l_dbg(1, debug, client, "switched to input=%d\n", v); + if (decoder->input != route->input) { + saa7110_selmux(client, route->input); + v4l_dbg(1, debug, client, "switched to input=%d\n", route->input); } break; - case DECODER_SET_OUTPUT: - v = *(int *) arg; - /* not much choice of outputs */ - if (v != 0) - return -EINVAL; - break; - - case DECODER_ENABLE_OUTPUT: - v = *(int *) arg; + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: + v = cmd == VIDIOC_STREAMON; if (decoder->enable != v) { decoder->enable = v; saa7110_write(client, 0x0E, v ? 0x18 : 0x80); @@ -353,46 +322,81 @@ saa7110_command (struct i2c_client *client, } break; - case DECODER_SET_PICTURE: + case VIDIOC_QUERYCTRL: { - struct video_picture *pic = arg; - - if (decoder->bright != pic->brightness) { - /* We want 0 to 255 we get 0-65535 */ - decoder->bright = pic->brightness; - saa7110_write(client, 0x19, decoder->bright >> 8); - } - if (decoder->contrast != pic->contrast) { - /* We want 0 to 127 we get 0-65535 */ - decoder->contrast = pic->contrast; - saa7110_write(client, 0x13, - decoder->contrast >> 9); - } - if (decoder->sat != pic->colour) { - /* We want 0 to 127 we get 0-65535 */ - decoder->sat = pic->colour; - saa7110_write(client, 0x12, decoder->sat >> 9); + struct v4l2_queryctrl *qc = arg; + + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); + case V4L2_CID_CONTRAST: + case V4L2_CID_SATURATION: + return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64); + case V4L2_CID_HUE: + return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); + default: + return -EINVAL; } - if (decoder->hue != pic->hue) { - /* We want -128 to 127 we get 0-65535 */ - decoder->hue = pic->hue; - saa7110_write(client, 0x07, - (decoder->hue >> 8) - 128); + break; + } + + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = decoder->bright; + break; + case V4L2_CID_CONTRAST: + ctrl->value = decoder->contrast; + break; + case V4L2_CID_SATURATION: + ctrl->value = decoder->sat; + break; + case V4L2_CID_HUE: + ctrl->value = decoder->hue; + break; + default: + return -EINVAL; } break; } - case DECODER_DUMP: - if (!debug) + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (decoder->bright != ctrl->value) { + decoder->bright = ctrl->value; + saa7110_write(client, 0x19, decoder->bright); + } break; - for (v = 0; v < SAA7110_NR_REG; v += 16) { - int j; - v4l_dbg(1, debug, client, "%02x:", v); - for (j = 0; j < 16 && v + j < SAA7110_NR_REG; j++) - printk(KERN_CONT " %02x", decoder->reg[v + j]); - printk(KERN_CONT "\n"); + case V4L2_CID_CONTRAST: + if (decoder->contrast != ctrl->value) { + decoder->contrast = ctrl->value; + saa7110_write(client, 0x13, decoder->contrast); + } + break; + case V4L2_CID_SATURATION: + if (decoder->sat != ctrl->value) { + decoder->sat = ctrl->value; + saa7110_write(client, 0x12, decoder->sat); + } + break; + case V4L2_CID_HUE: + if (decoder->hue != ctrl->value) { + decoder->hue = ctrl->value; + saa7110_write(client, 0x07, decoder->hue); + } + break; + default: + return -EINVAL; } break; + } default: v4l_dbg(1, debug, client, "unknown command %08x\n", cmd); @@ -429,7 +433,7 @@ static int saa7110_probe(struct i2c_client *client, decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL); if (!decoder) return -ENOMEM; - decoder->norm = VIDEO_MODE_PAL; + decoder->norm = V4L2_STD_PAL; decoder->input = 0; decoder->enable = 1; decoder->bright = 32768; diff --git a/drivers/media/video/saa7111.c b/drivers/media/video/saa7111.c deleted file mode 100644 index a4738a2fb4d3..000000000000 --- a/drivers/media/video/saa7111.c +++ /dev/null @@ -1,492 +0,0 @@ -/* - * saa7111 - Philips SAA7111A video decoder driver version 0.0.3 - * - * Copyright (C) 1998 Dave Perks - * - * Slight changes for video timing and attachment output by - * Wolfgang Scherr - * - * Changes by Ronald Bultje - * - moved over to linux>=2.4.x i2c protocol (1/1/2003) - * - * Changes by Michael Hunold - * - implemented DECODER_SET_GPIO, DECODER_INIT, DECODER_SET_VBI_BYPASS - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -MODULE_DESCRIPTION("Philips SAA7111 video decoder driver"); -MODULE_AUTHOR("Dave Perks"); -MODULE_LICENSE("GPL"); - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debug level (0-1)"); - -/* ----------------------------------------------------------------------- */ - -#define SAA7111_NR_REG 0x18 - -struct saa7111 { - unsigned char reg[SAA7111_NR_REG]; - - int norm; - int input; - int enable; -}; - -/* ----------------------------------------------------------------------- */ - -static inline int saa7111_write(struct i2c_client *client, u8 reg, u8 value) -{ - struct saa7111 *decoder = i2c_get_clientdata(client); - - decoder->reg[reg] = value; - return i2c_smbus_write_byte_data(client, reg, value); -} - -static inline void saa7111_write_if_changed(struct i2c_client *client, u8 reg, u8 value) -{ - struct saa7111 *decoder = i2c_get_clientdata(client); - - if (decoder->reg[reg] != value) { - decoder->reg[reg] = value; - i2c_smbus_write_byte_data(client, reg, value); - } -} - -static int saa7111_write_block(struct i2c_client *client, const u8 *data, unsigned int len) -{ - int ret = -1; - u8 reg; - - /* the saa7111 has an autoincrement function, use it if - * the adapter understands raw I2C */ - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - /* do raw I2C, not smbus compatible */ - struct saa7111 *decoder = i2c_get_clientdata(client); - u8 block_data[32]; - int block_len; - - while (len >= 2) { - block_len = 0; - block_data[block_len++] = reg = data[0]; - do { - block_data[block_len++] = - decoder->reg[reg++] = data[1]; - len -= 2; - data += 2; - } while (len >= 2 && data[0] == reg && block_len < 32); - ret = i2c_master_send(client, block_data, block_len); - if (ret < 0) - break; - } - } else { - /* do some slow I2C emulation kind of thing */ - while (len >= 2) { - reg = *data++; - ret = saa7111_write(client, reg, *data++); - if (ret < 0) - break; - len -= 2; - } - } - - return ret; -} - -static int saa7111_init_decoder(struct i2c_client *client, - struct video_decoder_init *init) -{ - return saa7111_write_block(client, init->data, init->len); -} - -static inline int saa7111_read(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -/* ----------------------------------------------------------------------- */ - -static const unsigned char saa7111_i2c_init[] = { - 0x00, 0x00, /* 00 - ID byte */ - 0x01, 0x00, /* 01 - reserved */ - - /*front end */ - 0x02, 0xd0, /* 02 - FUSE=3, GUDL=2, MODE=0 */ - 0x03, 0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, - * HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */ - 0x04, 0x00, /* 04 - GAI1=256 */ - 0x05, 0x00, /* 05 - GAI2=256 */ - - /* decoder */ - 0x06, 0xf3, /* 06 - HSB at 13(50Hz) / 17(60Hz) - * pixels after end of last line */ - /*0x07, 0x13, * 07 - HSS at 113(50Hz) / 117(60Hz) pixels - * after end of last line */ - 0x07, 0xe8, /* 07 - HSS seems to be needed to - * work with NTSC, too */ - 0x08, 0xc8, /* 08 - AUFD=1, FSEL=1, EXFIL=0, - * VTRC=1, HPLL=0, VNOI=0 */ - 0x09, 0x01, /* 09 - BYPS=0, PREF=0, BPSS=0, - * VBLB=0, UPTCV=0, APER=1 */ - 0x0a, 0x80, /* 0a - BRIG=128 */ - 0x0b, 0x47, /* 0b - CONT=1.109 */ - 0x0c, 0x40, /* 0c - SATN=1.0 */ - 0x0d, 0x00, /* 0d - HUE=0 */ - 0x0e, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, - * FCTC=0, CHBW=1 */ - 0x0f, 0x00, /* 0f - reserved */ - 0x10, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */ - 0x11, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, - * OEYC=1, OEHV=1, VIPB=0, COLO=0 */ - 0x12, 0x00, /* 12 - output control 2 */ - 0x13, 0x00, /* 13 - output control 3 */ - 0x14, 0x00, /* 14 - reserved */ - 0x15, 0x00, /* 15 - VBI */ - 0x16, 0x00, /* 16 - VBI */ - 0x17, 0x00, /* 17 - VBI */ -}; - -static int saa7111_command(struct i2c_client *client, unsigned cmd, void *arg) -{ - struct saa7111 *decoder = i2c_get_clientdata(client); - - switch (cmd) { - case 0: - break; - case DECODER_INIT: - { - struct video_decoder_init *init = arg; - struct video_decoder_init vdi; - - if (NULL != init) - return saa7111_init_decoder(client, init); - vdi.data = saa7111_i2c_init; - vdi.len = sizeof(saa7111_i2c_init); - return saa7111_init_decoder(client, &vdi); - } - - case DECODER_DUMP: - { - int i; - - for (i = 0; i < SAA7111_NR_REG; i += 16) { - int j; - - v4l_info(client, "%03x", i); - for (j = 0; j < 16 && i + j < SAA7111_NR_REG; ++j) { - printk(KERN_CONT " %02x", - saa7111_read(client, i + j)); - } - printk(KERN_CONT "\n"); - } - break; - } - - case DECODER_GET_CAPABILITIES: - { - struct video_decoder_capability *cap = arg; - - cap->flags = VIDEO_DECODER_PAL | - VIDEO_DECODER_NTSC | - VIDEO_DECODER_SECAM | - VIDEO_DECODER_AUTO | - VIDEO_DECODER_CCIR; - cap->inputs = 8; - cap->outputs = 1; - break; - } - - case DECODER_GET_STATUS: - { - int *iarg = arg; - int status; - int res; - - status = saa7111_read(client, 0x1f); - v4l_dbg(1, debug, client, "status: 0x%02x\n", status); - res = 0; - if ((status & (1 << 6)) == 0) { - res |= DECODER_STATUS_GOOD; - } - switch (decoder->norm) { - case VIDEO_MODE_NTSC: - res |= DECODER_STATUS_NTSC; - break; - case VIDEO_MODE_PAL: - res |= DECODER_STATUS_PAL; - break; - case VIDEO_MODE_SECAM: - res |= DECODER_STATUS_SECAM; - break; - default: - case VIDEO_MODE_AUTO: - if ((status & (1 << 5)) != 0) { - res |= DECODER_STATUS_NTSC; - } else { - res |= DECODER_STATUS_PAL; - } - break; - } - if ((status & (1 << 0)) != 0) { - res |= DECODER_STATUS_COLOR; - } - *iarg = res; - break; - } - - case DECODER_SET_GPIO: - { - int *iarg = arg; - if (0 != *iarg) { - saa7111_write(client, 0x11, - (decoder->reg[0x11] | 0x80)); - } else { - saa7111_write(client, 0x11, - (decoder->reg[0x11] & 0x7f)); - } - break; - } - - case DECODER_SET_VBI_BYPASS: - { - int *iarg = arg; - if (0 != *iarg) { - saa7111_write(client, 0x13, - (decoder->reg[0x13] & 0xf0) | 0x0a); - } else { - saa7111_write(client, 0x13, - (decoder->reg[0x13] & 0xf0)); - } - break; - } - - case DECODER_SET_NORM: - { - int *iarg = arg; - - switch (*iarg) { - - case VIDEO_MODE_NTSC: - saa7111_write(client, 0x08, - (decoder->reg[0x08] & 0x3f) | 0x40); - saa7111_write(client, 0x0e, - (decoder->reg[0x0e] & 0x8f)); - break; - - case VIDEO_MODE_PAL: - saa7111_write(client, 0x08, - (decoder->reg[0x08] & 0x3f) | 0x00); - saa7111_write(client, 0x0e, - (decoder->reg[0x0e] & 0x8f)); - break; - - case VIDEO_MODE_SECAM: - saa7111_write(client, 0x08, - (decoder->reg[0x08] & 0x3f) | 0x00); - saa7111_write(client, 0x0e, - (decoder->reg[0x0e] & 0x8f) | 0x50); - break; - - case VIDEO_MODE_AUTO: - saa7111_write(client, 0x08, - (decoder->reg[0x08] & 0x3f) | 0x80); - saa7111_write(client, 0x0e, - (decoder->reg[0x0e] & 0x8f)); - break; - - default: - return -EINVAL; - - } - decoder->norm = *iarg; - break; - } - - case DECODER_SET_INPUT: - { - int *iarg = arg; - - if (*iarg < 0 || *iarg > 7) { - return -EINVAL; - } - - if (decoder->input != *iarg) { - decoder->input = *iarg; - /* select mode */ - saa7111_write(client, 0x02, - (decoder-> - reg[0x02] & 0xf8) | decoder->input); - /* bypass chrominance trap for modes 4..7 */ - saa7111_write(client, 0x09, - (decoder-> - reg[0x09] & 0x7f) | ((decoder-> - input > - 3) ? 0x80 : - 0)); - } - break; - } - - case DECODER_SET_OUTPUT: - { - int *iarg = arg; - - /* not much choice of outputs */ - if (*iarg != 0) { - return -EINVAL; - } - break; - } - - case DECODER_ENABLE_OUTPUT: - { - int *iarg = arg; - int enable = (*iarg != 0); - - if (decoder->enable != enable) { - decoder->enable = enable; - - /* RJ: If output should be disabled (for - * playing videos), we also need a open PLL. - * The input is set to 0 (where no input - * source is connected), although this - * is not necessary. - * - * If output should be enabled, we have to - * reverse the above. - */ - - if (decoder->enable) { - saa7111_write(client, 0x02, - (decoder-> - reg[0x02] & 0xf8) | - decoder->input); - saa7111_write(client, 0x08, - (decoder->reg[0x08] & 0xfb)); - saa7111_write(client, 0x11, - (decoder-> - reg[0x11] & 0xf3) | 0x0c); - } else { - saa7111_write(client, 0x02, - (decoder->reg[0x02] & 0xf8)); - saa7111_write(client, 0x08, - (decoder-> - reg[0x08] & 0xfb) | 0x04); - saa7111_write(client, 0x11, - (decoder->reg[0x11] & 0xf3)); - } - } - break; - } - - case DECODER_SET_PICTURE: - { - struct video_picture *pic = arg; - - /* We want 0 to 255 we get 0-65535 */ - saa7111_write_if_changed(client, 0x0a, pic->brightness >> 8); - /* We want 0 to 127 we get 0-65535 */ - saa7111_write(client, 0x0b, pic->contrast >> 9); - /* We want 0 to 127 we get 0-65535 */ - saa7111_write(client, 0x0c, pic->colour >> 9); - /* We want -128 to 127 we get 0-65535 */ - saa7111_write(client, 0x0d, (pic->hue - 32768) >> 8); - break; - } - - default: - return -EINVAL; - } - - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static unsigned short normal_i2c[] = { 0x48 >> 1, I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD; - -static int saa7111_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int i; - struct saa7111 *decoder; - struct video_decoder_init vdi; - - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - v4l_info(client, "chip found @ 0x%x (%s)\n", - client->addr << 1, client->adapter->name); - - decoder = kzalloc(sizeof(struct saa7111), GFP_KERNEL); - if (decoder == NULL) { - kfree(client); - return -ENOMEM; - } - decoder->norm = VIDEO_MODE_NTSC; - decoder->input = 0; - decoder->enable = 1; - i2c_set_clientdata(client, decoder); - - vdi.data = saa7111_i2c_init; - vdi.len = sizeof(saa7111_i2c_init); - i = saa7111_init_decoder(client, &vdi); - if (i < 0) { - v4l_dbg(1, debug, client, "init status %d\n", i); - } else { - v4l_dbg(1, debug, client, "revision %x\n", - saa7111_read(client, 0x00) >> 4); - } - return 0; -} - -static int saa7111_remove(struct i2c_client *client) -{ - kfree(i2c_get_clientdata(client)); - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static const struct i2c_device_id saa7111_id[] = { - { "saa7111_old", 0 }, /* "saa7111" maps to the saa7115 driver */ - { } -}; -MODULE_DEVICE_TABLE(i2c, saa7111_id); - -static struct v4l2_i2c_driver_data v4l2_i2c_data = { - .name = "saa7111", - .driverid = I2C_DRIVERID_SAA7111A, - .command = saa7111_command, - .probe = saa7111_probe, - .remove = saa7111_remove, - .id_table = saa7111_id, -}; diff --git a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c deleted file mode 100644 index 7ca709fda5f4..000000000000 --- a/drivers/media/video/saa7114.c +++ /dev/null @@ -1,1068 +0,0 @@ -/* - * saa7114 - Philips SAA7114H video decoder driver version 0.0.1 - * - * Copyright (C) 2002 Maxim Yevtyushkin - * - * Based on saa7111 driver by Dave Perks - * - * Copyright (C) 1998 Dave Perks - * - * Slight changes for video timing and attachment output by - * Wolfgang Scherr - * - * Changes by Ronald Bultje - * - moved over to linux>=2.4.x i2c protocol (1/1/2003) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -MODULE_DESCRIPTION("Philips SAA7114H video decoder driver"); -MODULE_AUTHOR("Maxim Yevtyushkin"); -MODULE_LICENSE("GPL"); - -static int debug; -module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level (0-1)"); - -/* ----------------------------------------------------------------------- */ - -struct saa7114 { - unsigned char reg[0xf0 * 2]; - - int norm; - int input; - int enable; - int bright; - int contrast; - int hue; - int sat; - int playback; -}; - -#define I2C_DELAY 10 - - -//#define SAA_7114_NTSC_HSYNC_START (-3) -//#define SAA_7114_NTSC_HSYNC_STOP (-18) - -#define SAA_7114_NTSC_HSYNC_START (-17) -#define SAA_7114_NTSC_HSYNC_STOP (-32) - -//#define SAA_7114_NTSC_HOFFSET (5) -#define SAA_7114_NTSC_HOFFSET (6) -#define SAA_7114_NTSC_VOFFSET (10) -#define SAA_7114_NTSC_WIDTH (720) -#define SAA_7114_NTSC_HEIGHT (250) - -#define SAA_7114_SECAM_HSYNC_START (-17) -#define SAA_7114_SECAM_HSYNC_STOP (-32) - -#define SAA_7114_SECAM_HOFFSET (2) -#define SAA_7114_SECAM_VOFFSET (10) -#define SAA_7114_SECAM_WIDTH (720) -#define SAA_7114_SECAM_HEIGHT (300) - -#define SAA_7114_PAL_HSYNC_START (-17) -#define SAA_7114_PAL_HSYNC_STOP (-32) - -#define SAA_7114_PAL_HOFFSET (2) -#define SAA_7114_PAL_VOFFSET (10) -#define SAA_7114_PAL_WIDTH (720) -#define SAA_7114_PAL_HEIGHT (300) - - - -#define SAA_7114_VERTICAL_CHROMA_OFFSET 0 //0x50504040 -#define SAA_7114_VERTICAL_LUMA_OFFSET 0 - -#define REG_ADDR(x) (((x) << 1) + 1) -#define LOBYTE(x) ((unsigned char)((x) & 0xff)) -#define HIBYTE(x) ((unsigned char)(((x) >> 8) & 0xff)) -#define LOWORD(x) ((unsigned short int)((x) & 0xffff)) -#define HIWORD(x) ((unsigned short int)(((x) >> 16) & 0xffff)) - - -/* ----------------------------------------------------------------------- */ - -static inline int saa7114_write(struct i2c_client *client, u8 reg, u8 value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - -static int saa7114_write_block(struct i2c_client *client, const u8 *data, unsigned int len) -{ - int ret = -1; - u8 reg; - - /* the saa7114 has an autoincrement function, use it if - * the adapter understands raw I2C */ - if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - /* do raw I2C, not smbus compatible */ - u8 block_data[32]; - int block_len; - - while (len >= 2) { - block_len = 0; - block_data[block_len++] = reg = data[0]; - do { - block_data[block_len++] = data[1]; - reg++; - len -= 2; - data += 2; - } while (len >= 2 && data[0] == reg && block_len < 32); - ret = i2c_master_send(client, block_data, block_len); - if (ret < 0) - break; - } - } else { - /* do some slow I2C emulation kind of thing */ - while (len >= 2) { - reg = *data++; - ret = saa7114_write(client, reg, *data++); - if (ret < 0) - break; - len -= 2; - } - } - - return ret; -} - -static inline int saa7114_read(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -/* ----------------------------------------------------------------------- */ - -// initially set NTSC, composite - - -static const unsigned char init[] = { - 0x00, 0x00, /* 00 - ID byte , chip version, - * read only */ - 0x01, 0x08, /* 01 - X,X,X,X, IDEL3 to IDEL0 - - * horizontal increment delay, - * recommended position */ - 0x02, 0x00, /* 02 - FUSE=3, GUDL=2, MODE=0 ; - * input control */ - 0x03, 0x10, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, - * HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */ - 0x04, 0x90, /* 04 - GAI1=256 */ - 0x05, 0x90, /* 05 - GAI2=256 */ - 0x06, SAA_7114_NTSC_HSYNC_START, /* 06 - HSB: hsync start, - * depends on the video standard */ - 0x07, SAA_7114_NTSC_HSYNC_STOP, /* 07 - HSS: hsync stop, depends - *on the video standard */ - 0x08, 0xb8, /* 08 - AUFD=1, FSEL=1, EXFIL=0, VTRC=1, - * HPLL: free running in playback, locked - * in capture, VNOI=0 */ - 0x09, 0x80, /* 09 - BYPS=0, PREF=0, BPSS=0, VBLB=0, - * UPTCV=0, APER=1; depends from input */ - 0x0a, 0x80, /* 0a - BRIG=128 */ - 0x0b, 0x44, /* 0b - CONT=1.109 */ - 0x0c, 0x40, /* 0c - SATN=1.0 */ - 0x0d, 0x00, /* 0d - HUE=0 */ - 0x0e, 0x84, /* 0e - CDTO, CSTD2 to 0, DCVF, FCTC, - * CCOMB; depends from video standard */ - 0x0f, 0x24, /* 0f - ACGC,CGAIN6 to CGAIN0; depends - * from video standard */ - 0x10, 0x03, /* 10 - OFFU1 to 0, OFFV1 to 0, CHBW, - * LCBW2 to 0 */ - 0x11, 0x59, /* 11 - COLO, RTP1, HEDL1 to 0, RTP0, - * YDEL2 to 0 */ - 0x12, 0xc9, /* 12 - RT signal control RTSE13 to 10 - * and 03 to 00 */ - 0x13, 0x80, /* 13 - RT/X port output control */ - 0x14, 0x00, /* 14 - analog, ADC, compatibility control */ - 0x15, 0x00, /* 15 - VGATE start FID change */ - 0x16, 0xfe, /* 16 - VGATE stop */ - 0x17, 0x00, /* 17 - Misc., VGATE MSBs */ - 0x18, 0x40, /* RAWG */ - 0x19, 0x80, /* RAWO */ - 0x1a, 0x00, - 0x1b, 0x00, - 0x1c, 0x00, - 0x1d, 0x00, - 0x1e, 0x00, - 0x1f, 0x00, /* status byte, read only */ - 0x20, 0x00, /* video decoder reserved part */ - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x24, 0x00, - 0x25, 0x00, - 0x26, 0x00, - 0x27, 0x00, - 0x28, 0x00, - 0x29, 0x00, - 0x2a, 0x00, - 0x2b, 0x00, - 0x2c, 0x00, - 0x2d, 0x00, - 0x2e, 0x00, - 0x2f, 0x00, - 0x30, 0xbc, /* audio clock generator */ - 0x31, 0xdf, - 0x32, 0x02, - 0x33, 0x00, - 0x34, 0xcd, - 0x35, 0xcc, - 0x36, 0x3a, - 0x37, 0x00, - 0x38, 0x03, - 0x39, 0x10, - 0x3a, 0x00, - 0x3b, 0x00, - 0x3c, 0x00, - 0x3d, 0x00, - 0x3e, 0x00, - 0x3f, 0x00, - 0x40, 0x00, /* VBI data slicer */ - 0x41, 0xff, - 0x42, 0xff, - 0x43, 0xff, - 0x44, 0xff, - 0x45, 0xff, - 0x46, 0xff, - 0x47, 0xff, - 0x48, 0xff, - 0x49, 0xff, - 0x4a, 0xff, - 0x4b, 0xff, - 0x4c, 0xff, - 0x4d, 0xff, - 0x4e, 0xff, - 0x4f, 0xff, - 0x50, 0xff, - 0x51, 0xff, - 0x52, 0xff, - 0x53, 0xff, - 0x54, 0xff, - 0x55, 0xff, - 0x56, 0xff, - 0x57, 0xff, - 0x58, 0x40, // framing code - 0x59, 0x47, // horizontal offset - 0x5a, 0x06, // vertical offset - 0x5b, 0x83, // field offset - 0x5c, 0x00, // reserved - 0x5d, 0x3e, // header and data - 0x5e, 0x00, // sliced data - 0x5f, 0x00, // reserved - 0x60, 0x00, /* video decoder reserved part */ - 0x61, 0x00, - 0x62, 0x00, - 0x63, 0x00, - 0x64, 0x00, - 0x65, 0x00, - 0x66, 0x00, - 0x67, 0x00, - 0x68, 0x00, - 0x69, 0x00, - 0x6a, 0x00, - 0x6b, 0x00, - 0x6c, 0x00, - 0x6d, 0x00, - 0x6e, 0x00, - 0x6f, 0x00, - 0x70, 0x00, /* video decoder reserved part */ - 0x71, 0x00, - 0x72, 0x00, - 0x73, 0x00, - 0x74, 0x00, - 0x75, 0x00, - 0x76, 0x00, - 0x77, 0x00, - 0x78, 0x00, - 0x79, 0x00, - 0x7a, 0x00, - 0x7b, 0x00, - 0x7c, 0x00, - 0x7d, 0x00, - 0x7e, 0x00, - 0x7f, 0x00, - 0x80, 0x00, /* X-port, I-port and scaler */ - 0x81, 0x00, - 0x82, 0x00, - 0x83, 0x00, - 0x84, 0xc5, - 0x85, 0x0d, // hsync and vsync ? - 0x86, 0x40, - 0x87, 0x01, - 0x88, 0x00, - 0x89, 0x00, - 0x8a, 0x00, - 0x8b, 0x00, - 0x8c, 0x00, - 0x8d, 0x00, - 0x8e, 0x00, - 0x8f, 0x00, - 0x90, 0x03, /* Task A definition */ - 0x91, 0x08, - 0x92, 0x00, - 0x93, 0x40, - 0x94, 0x00, // window settings - 0x95, 0x00, - 0x96, 0x00, - 0x97, 0x00, - 0x98, 0x00, - 0x99, 0x00, - 0x9a, 0x00, - 0x9b, 0x00, - 0x9c, 0x00, - 0x9d, 0x00, - 0x9e, 0x00, - 0x9f, 0x00, - 0xa0, 0x01, /* horizontal integer prescaling ratio */ - 0xa1, 0x00, /* horizontal prescaler accumulation - * sequence length */ - 0xa2, 0x00, /* UV FIR filter, Y FIR filter, prescaler - * DC gain */ - 0xa3, 0x00, - 0xa4, 0x80, // luminance brightness - 0xa5, 0x40, // luminance gain - 0xa6, 0x40, // chrominance saturation - 0xa7, 0x00, - 0xa8, 0x00, // horizontal luminance scaling increment - 0xa9, 0x04, - 0xaa, 0x00, // horizontal luminance phase offset - 0xab, 0x00, - 0xac, 0x00, // horizontal chrominance scaling increment - 0xad, 0x02, - 0xae, 0x00, // horizontal chrominance phase offset - 0xaf, 0x00, - 0xb0, 0x00, // vertical luminance scaling increment - 0xb1, 0x04, - 0xb2, 0x00, // vertical chrominance scaling increment - 0xb3, 0x04, - 0xb4, 0x00, - 0xb5, 0x00, - 0xb6, 0x00, - 0xb7, 0x00, - 0xb8, 0x00, - 0xb9, 0x00, - 0xba, 0x00, - 0xbb, 0x00, - 0xbc, 0x00, - 0xbd, 0x00, - 0xbe, 0x00, - 0xbf, 0x00, - 0xc0, 0x02, // Task B definition - 0xc1, 0x08, - 0xc2, 0x00, - 0xc3, 0x40, - 0xc4, 0x00, // window settings - 0xc5, 0x00, - 0xc6, 0x00, - 0xc7, 0x00, - 0xc8, 0x00, - 0xc9, 0x00, - 0xca, 0x00, - 0xcb, 0x00, - 0xcc, 0x00, - 0xcd, 0x00, - 0xce, 0x00, - 0xcf, 0x00, - 0xd0, 0x01, // horizontal integer prescaling ratio - 0xd1, 0x00, // horizontal prescaler accumulation sequence length - 0xd2, 0x00, // UV FIR filter, Y FIR filter, prescaler DC gain - 0xd3, 0x00, - 0xd4, 0x80, // luminance brightness - 0xd5, 0x40, // luminance gain - 0xd6, 0x40, // chrominance saturation - 0xd7, 0x00, - 0xd8, 0x00, // horizontal luminance scaling increment - 0xd9, 0x04, - 0xda, 0x00, // horizontal luminance phase offset - 0xdb, 0x00, - 0xdc, 0x00, // horizontal chrominance scaling increment - 0xdd, 0x02, - 0xde, 0x00, // horizontal chrominance phase offset - 0xdf, 0x00, - 0xe0, 0x00, // vertical luminance scaling increment - 0xe1, 0x04, - 0xe2, 0x00, // vertical chrominance scaling increment - 0xe3, 0x04, - 0xe4, 0x00, - 0xe5, 0x00, - 0xe6, 0x00, - 0xe7, 0x00, - 0xe8, 0x00, - 0xe9, 0x00, - 0xea, 0x00, - 0xeb, 0x00, - 0xec, 0x00, - 0xed, 0x00, - 0xee, 0x00, - 0xef, 0x00 -}; - -static int saa7114_command(struct i2c_client *client, unsigned cmd, void *arg) -{ - struct saa7114 *decoder = i2c_get_clientdata(client); - - switch (cmd) { - case 0: - //dprintk(1, KERN_INFO "%s: writing init\n", I2C_NAME(client)); - //saa7114_write_block(client, init, sizeof(init)); - break; - - case DECODER_DUMP: - { - int i; - - if (!debug) - break; - v4l_info(client, "decoder dump\n"); - - for (i = 0; i < 32; i += 16) { - int j; - - v4l_info(client, "%03x", i); - for (j = 0; j < 16; ++j) { - printk(KERN_CONT " %02x", - saa7114_read(client, i + j)); - } - printk(KERN_CONT "\n"); - } - break; - } - - case DECODER_GET_CAPABILITIES: - { - struct video_decoder_capability *cap = arg; - - v4l_dbg(1, debug, client, "get capabilities\n"); - - cap->flags = VIDEO_DECODER_PAL | - VIDEO_DECODER_NTSC | - VIDEO_DECODER_AUTO | - VIDEO_DECODER_CCIR; - cap->inputs = 8; - cap->outputs = 1; - break; - } - - case DECODER_GET_STATUS: - { - int *iarg = arg; - int status; - int res; - - status = saa7114_read(client, 0x1f); - - v4l_dbg(1, debug, client, "status: 0x%02x\n", status); - res = 0; - if ((status & (1 << 6)) == 0) { - res |= DECODER_STATUS_GOOD; - } - switch (decoder->norm) { - case VIDEO_MODE_NTSC: - res |= DECODER_STATUS_NTSC; - break; - case VIDEO_MODE_PAL: - res |= DECODER_STATUS_PAL; - break; - case VIDEO_MODE_SECAM: - res |= DECODER_STATUS_SECAM; - break; - default: - case VIDEO_MODE_AUTO: - if ((status & (1 << 5)) != 0) { - res |= DECODER_STATUS_NTSC; - } else { - res |= DECODER_STATUS_PAL; - } - break; - } - if ((status & (1 << 0)) != 0) { - res |= DECODER_STATUS_COLOR; - } - *iarg = res; - break; - } - - case DECODER_SET_NORM: - { - int *iarg = arg; - - short int hoff = 0, voff = 0, w = 0, h = 0; - - v4l_dbg(1, debug, client, "set norm\n"); - - switch (*iarg) { - case VIDEO_MODE_NTSC: - v4l_dbg(1, debug, client, "NTSC\n"); - decoder->reg[REG_ADDR(0x06)] = - SAA_7114_NTSC_HSYNC_START; - decoder->reg[REG_ADDR(0x07)] = - SAA_7114_NTSC_HSYNC_STOP; - - decoder->reg[REG_ADDR(0x08)] = decoder->playback ? 0x7c : 0xb8; // PLL free when playback, PLL close when capture - - decoder->reg[REG_ADDR(0x0e)] = 0x85; - decoder->reg[REG_ADDR(0x0f)] = 0x24; - - hoff = SAA_7114_NTSC_HOFFSET; - voff = SAA_7114_NTSC_VOFFSET; - w = SAA_7114_NTSC_WIDTH; - h = SAA_7114_NTSC_HEIGHT; - - break; - - case VIDEO_MODE_PAL: - v4l_dbg(1, debug, client, "PAL\n"); - decoder->reg[REG_ADDR(0x06)] = - SAA_7114_PAL_HSYNC_START; - decoder->reg[REG_ADDR(0x07)] = - SAA_7114_PAL_HSYNC_STOP; - - decoder->reg[REG_ADDR(0x08)] = decoder->playback ? 0x7c : 0xb8; // PLL free when playback, PLL close when capture - - decoder->reg[REG_ADDR(0x0e)] = 0x81; - decoder->reg[REG_ADDR(0x0f)] = 0x24; - - hoff = SAA_7114_PAL_HOFFSET; - voff = SAA_7114_PAL_VOFFSET; - w = SAA_7114_PAL_WIDTH; - h = SAA_7114_PAL_HEIGHT; - - break; - - default: - v4l_dbg(1, debug, client, "Unknown video mode\n"); - return -EINVAL; - } - - - decoder->reg[REG_ADDR(0x94)] = LOBYTE(hoff); // hoffset low - decoder->reg[REG_ADDR(0x95)] = HIBYTE(hoff) & 0x0f; // hoffset high - decoder->reg[REG_ADDR(0x96)] = LOBYTE(w); // width low - decoder->reg[REG_ADDR(0x97)] = HIBYTE(w) & 0x0f; // width high - decoder->reg[REG_ADDR(0x98)] = LOBYTE(voff); // voffset low - decoder->reg[REG_ADDR(0x99)] = HIBYTE(voff) & 0x0f; // voffset high - decoder->reg[REG_ADDR(0x9a)] = LOBYTE(h + 2); // height low - decoder->reg[REG_ADDR(0x9b)] = HIBYTE(h + 2) & 0x0f; // height high - decoder->reg[REG_ADDR(0x9c)] = LOBYTE(w); // out width low - decoder->reg[REG_ADDR(0x9d)] = HIBYTE(w) & 0x0f; // out width high - decoder->reg[REG_ADDR(0x9e)] = LOBYTE(h); // out height low - decoder->reg[REG_ADDR(0x9f)] = HIBYTE(h) & 0x0f; // out height high - - decoder->reg[REG_ADDR(0xc4)] = LOBYTE(hoff); // hoffset low - decoder->reg[REG_ADDR(0xc5)] = HIBYTE(hoff) & 0x0f; // hoffset high - decoder->reg[REG_ADDR(0xc6)] = LOBYTE(w); // width low - decoder->reg[REG_ADDR(0xc7)] = HIBYTE(w) & 0x0f; // width high - decoder->reg[REG_ADDR(0xc8)] = LOBYTE(voff); // voffset low - decoder->reg[REG_ADDR(0xc9)] = HIBYTE(voff) & 0x0f; // voffset high - decoder->reg[REG_ADDR(0xca)] = LOBYTE(h + 2); // height low - decoder->reg[REG_ADDR(0xcb)] = HIBYTE(h + 2) & 0x0f; // height high - decoder->reg[REG_ADDR(0xcc)] = LOBYTE(w); // out width low - decoder->reg[REG_ADDR(0xcd)] = HIBYTE(w) & 0x0f; // out width high - decoder->reg[REG_ADDR(0xce)] = LOBYTE(h); // out height low - decoder->reg[REG_ADDR(0xcf)] = HIBYTE(h) & 0x0f; // out height high - - - saa7114_write(client, 0x80, 0x06); // i-port and scaler back end clock selection, task A&B off - saa7114_write(client, 0x88, 0xd8); // sw reset scaler - saa7114_write(client, 0x88, 0xf8); // sw reset scaler release - - saa7114_write_block(client, decoder->reg + (0x06 << 1), - 3 << 1); - saa7114_write_block(client, decoder->reg + (0x0e << 1), - 2 << 1); - saa7114_write_block(client, decoder->reg + (0x5a << 1), - 2 << 1); - - saa7114_write_block(client, decoder->reg + (0x94 << 1), - (0x9f + 1 - 0x94) << 1); - saa7114_write_block(client, decoder->reg + (0xc4 << 1), - (0xcf + 1 - 0xc4) << 1); - - saa7114_write(client, 0x88, 0xd8); // sw reset scaler - saa7114_write(client, 0x88, 0xf8); // sw reset scaler release - saa7114_write(client, 0x80, 0x36); // i-port and scaler back end clock selection - - decoder->norm = *iarg; - break; - } - - case DECODER_SET_INPUT: - { - int *iarg = arg; - - v4l_dbg(1, debug, client, "set input (%d)\n", *iarg); - if (*iarg < 0 || *iarg > 7) { - return -EINVAL; - } - - if (decoder->input != *iarg) { - v4l_dbg(1, debug, client, "now setting %s input\n", - *iarg >= 6 ? "S-Video" : "Composite"); - decoder->input = *iarg; - - /* select mode */ - decoder->reg[REG_ADDR(0x02)] = - (decoder-> - reg[REG_ADDR(0x02)] & 0xf0) | (decoder-> - input < - 6 ? 0x0 : 0x9); - saa7114_write(client, 0x02, - decoder->reg[REG_ADDR(0x02)]); - - /* bypass chrominance trap for modes 6..9 */ - decoder->reg[REG_ADDR(0x09)] = - (decoder-> - reg[REG_ADDR(0x09)] & 0x7f) | (decoder-> - input < - 6 ? 0x0 : - 0x80); - saa7114_write(client, 0x09, - decoder->reg[REG_ADDR(0x09)]); - - decoder->reg[REG_ADDR(0x0e)] = - decoder->input < - 6 ? decoder-> - reg[REG_ADDR(0x0e)] | 1 : decoder-> - reg[REG_ADDR(0x0e)] & ~1; - saa7114_write(client, 0x0e, - decoder->reg[REG_ADDR(0x0e)]); - } - break; - } - - case DECODER_SET_OUTPUT: - { - int *iarg = arg; - - v4l_dbg(1, debug, client, "set output\n"); - - /* not much choice of outputs */ - if (*iarg != 0) { - return -EINVAL; - } - break; - } - - case DECODER_ENABLE_OUTPUT: - { - int *iarg = arg; - int enable = (*iarg != 0); - - v4l_dbg(1, debug, client, "%s output\n", - enable ? "enable" : "disable"); - - decoder->playback = !enable; - - if (decoder->enable != enable) { - decoder->enable = enable; - - /* RJ: If output should be disabled (for - * playing videos), we also need a open PLL. - * The input is set to 0 (where no input - * source is connected), although this - * is not necessary. - * - * If output should be enabled, we have to - * reverse the above. - */ - - if (decoder->enable) { - decoder->reg[REG_ADDR(0x08)] = 0xb8; - decoder->reg[REG_ADDR(0x12)] = 0xc9; - decoder->reg[REG_ADDR(0x13)] = 0x80; - decoder->reg[REG_ADDR(0x87)] = 0x01; - } else { - decoder->reg[REG_ADDR(0x08)] = 0x7c; - decoder->reg[REG_ADDR(0x12)] = 0x00; - decoder->reg[REG_ADDR(0x13)] = 0x00; - decoder->reg[REG_ADDR(0x87)] = 0x00; - } - - saa7114_write_block(client, - decoder->reg + (0x12 << 1), - 2 << 1); - saa7114_write(client, 0x08, - decoder->reg[REG_ADDR(0x08)]); - saa7114_write(client, 0x87, - decoder->reg[REG_ADDR(0x87)]); - saa7114_write(client, 0x88, 0xd8); // sw reset scaler - saa7114_write(client, 0x88, 0xf8); // sw reset scaler release - saa7114_write(client, 0x80, 0x36); - - } - break; - } - - case DECODER_SET_PICTURE: - { - struct video_picture *pic = arg; - - v4l_dbg(1, debug, client, - "decoder set picture bright=%d contrast=%d saturation=%d hue=%d\n", - pic->brightness, pic->contrast, pic->colour, pic->hue); - - if (decoder->bright != pic->brightness) { - /* We want 0 to 255 we get 0-65535 */ - decoder->bright = pic->brightness; - saa7114_write(client, 0x0a, decoder->bright >> 8); - } - if (decoder->contrast != pic->contrast) { - /* We want 0 to 127 we get 0-65535 */ - decoder->contrast = pic->contrast; - saa7114_write(client, 0x0b, - decoder->contrast >> 9); - } - if (decoder->sat != pic->colour) { - /* We want 0 to 127 we get 0-65535 */ - decoder->sat = pic->colour; - saa7114_write(client, 0x0c, decoder->sat >> 9); - } - if (decoder->hue != pic->hue) { - /* We want -128 to 127 we get 0-65535 */ - decoder->hue = pic->hue; - saa7114_write(client, 0x0d, - (decoder->hue - 32768) >> 8); - } - break; - } - - default: - return -EINVAL; - } - - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static unsigned short normal_i2c[] = { 0x42 >> 1, 0x40 >> 1, I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD; - -static int saa7114_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - int i, err[30]; - short int hoff = SAA_7114_NTSC_HOFFSET; - short int voff = SAA_7114_NTSC_VOFFSET; - short int w = SAA_7114_NTSC_WIDTH; - short int h = SAA_7114_NTSC_HEIGHT; - struct saa7114 *decoder; - - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -ENODEV; - - v4l_info(client, "chip found @ 0x%x (%s)\n", - client->addr << 1, client->adapter->name); - - decoder = kzalloc(sizeof(struct saa7114), GFP_KERNEL); - if (decoder == NULL) - return -ENOMEM; - decoder->norm = VIDEO_MODE_NTSC; - decoder->input = -1; - decoder->enable = 1; - decoder->bright = 32768; - decoder->contrast = 32768; - decoder->hue = 32768; - decoder->sat = 32768; - decoder->playback = 0; // initially capture mode useda - i2c_set_clientdata(client, decoder); - - memcpy(decoder->reg, init, sizeof(init)); - - decoder->reg[REG_ADDR(0x94)] = LOBYTE(hoff); // hoffset low - decoder->reg[REG_ADDR(0x95)] = HIBYTE(hoff) & 0x0f; // hoffset high - decoder->reg[REG_ADDR(0x96)] = LOBYTE(w); // width low - decoder->reg[REG_ADDR(0x97)] = HIBYTE(w) & 0x0f; // width high - decoder->reg[REG_ADDR(0x98)] = LOBYTE(voff); // voffset low - decoder->reg[REG_ADDR(0x99)] = HIBYTE(voff) & 0x0f; // voffset high - decoder->reg[REG_ADDR(0x9a)] = LOBYTE(h + 2); // height low - decoder->reg[REG_ADDR(0x9b)] = HIBYTE(h + 2) & 0x0f; // height high - decoder->reg[REG_ADDR(0x9c)] = LOBYTE(w); // out width low - decoder->reg[REG_ADDR(0x9d)] = HIBYTE(w) & 0x0f; // out width high - decoder->reg[REG_ADDR(0x9e)] = LOBYTE(h); // out height low - decoder->reg[REG_ADDR(0x9f)] = HIBYTE(h) & 0x0f; // out height high - - decoder->reg[REG_ADDR(0xc4)] = LOBYTE(hoff); // hoffset low - decoder->reg[REG_ADDR(0xc5)] = HIBYTE(hoff) & 0x0f; // hoffset high - decoder->reg[REG_ADDR(0xc6)] = LOBYTE(w); // width low - decoder->reg[REG_ADDR(0xc7)] = HIBYTE(w) & 0x0f; // width high - decoder->reg[REG_ADDR(0xc8)] = LOBYTE(voff); // voffset low - decoder->reg[REG_ADDR(0xc9)] = HIBYTE(voff) & 0x0f; // voffset high - decoder->reg[REG_ADDR(0xca)] = LOBYTE(h + 2); // height low - decoder->reg[REG_ADDR(0xcb)] = HIBYTE(h + 2) & 0x0f; // height high - decoder->reg[REG_ADDR(0xcc)] = LOBYTE(w); // out width low - decoder->reg[REG_ADDR(0xcd)] = HIBYTE(w) & 0x0f; // out width high - decoder->reg[REG_ADDR(0xce)] = LOBYTE(h); // out height low - decoder->reg[REG_ADDR(0xcf)] = HIBYTE(h) & 0x0f; // out height high - - decoder->reg[REG_ADDR(0xb8)] = - LOBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - decoder->reg[REG_ADDR(0xb9)] = - HIBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - decoder->reg[REG_ADDR(0xba)] = - LOBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - decoder->reg[REG_ADDR(0xbb)] = - HIBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - - decoder->reg[REG_ADDR(0xbc)] = - LOBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - decoder->reg[REG_ADDR(0xbd)] = - HIBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - decoder->reg[REG_ADDR(0xbe)] = - LOBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - decoder->reg[REG_ADDR(0xbf)] = - HIBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - - decoder->reg[REG_ADDR(0xe8)] = - LOBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - decoder->reg[REG_ADDR(0xe9)] = - HIBYTE(LOWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - decoder->reg[REG_ADDR(0xea)] = - LOBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - decoder->reg[REG_ADDR(0xeb)] = - HIBYTE(HIWORD(SAA_7114_VERTICAL_CHROMA_OFFSET)); - - decoder->reg[REG_ADDR(0xec)] = - LOBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - decoder->reg[REG_ADDR(0xed)] = - HIBYTE(LOWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - decoder->reg[REG_ADDR(0xee)] = - LOBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - decoder->reg[REG_ADDR(0xef)] = - HIBYTE(HIWORD(SAA_7114_VERTICAL_LUMA_OFFSET)); - - - decoder->reg[REG_ADDR(0x13)] = 0x80; // RTC0 on - decoder->reg[REG_ADDR(0x87)] = 0x01; // I-Port - decoder->reg[REG_ADDR(0x12)] = 0xc9; // RTS0 - - decoder->reg[REG_ADDR(0x02)] = 0xc0; // set composite1 input, aveasy - decoder->reg[REG_ADDR(0x09)] = 0x00; // chrominance trap - decoder->reg[REG_ADDR(0x0e)] |= 1; // combfilter on - - - v4l_dbg(1, debug, client, "starting init\n"); - - err[0] = - saa7114_write_block(client, decoder->reg + (0x20 << 1), - 0x10 << 1); - err[1] = - saa7114_write_block(client, decoder->reg + (0x30 << 1), - 0x10 << 1); - err[2] = - saa7114_write_block(client, decoder->reg + (0x63 << 1), - (0x7f + 1 - 0x63) << 1); - err[3] = - saa7114_write_block(client, decoder->reg + (0x89 << 1), - 6 << 1); - err[4] = - saa7114_write_block(client, decoder->reg + (0xb8 << 1), - 8 << 1); - err[5] = - saa7114_write_block(client, decoder->reg + (0xe8 << 1), - 8 << 1); - - - for (i = 0; i <= 5; i++) { - if (err[i] < 0) { - v4l_dbg(1, debug, client, - "init error %d at stage %d, leaving attach.\n", - i, err[i]); - kfree(decoder); - return -EIO; - } - } - - for (i = 6; i < 8; i++) { - v4l_dbg(1, debug, client, - "reg[0x%02x] = 0x%02x (0x%02x)\n", - i, saa7114_read(client, i), - decoder->reg[REG_ADDR(i)]); - } - - v4l_dbg(1, debug, client, - "performing decoder reset sequence\n"); - - err[6] = saa7114_write(client, 0x80, 0x06); // i-port and scaler backend clock selection, task A&B off - err[7] = saa7114_write(client, 0x88, 0xd8); // sw reset scaler - err[8] = saa7114_write(client, 0x88, 0xf8); // sw reset scaler release - - for (i = 6; i <= 8; i++) { - if (err[i] < 0) { - v4l_dbg(1, debug, client, - "init error %d at stage %d, leaving attach.\n", - i, err[i]); - kfree(decoder); - return -EIO; - } - } - - v4l_dbg(1, debug, client, "performing the rest of init\n"); - - err[9] = saa7114_write(client, 0x01, decoder->reg[REG_ADDR(0x01)]); - err[10] = saa7114_write_block(client, decoder->reg + (0x03 << 1), (0x1e + 1 - 0x03) << 1); // big seq - err[11] = saa7114_write_block(client, decoder->reg + (0x40 << 1), (0x5f + 1 - 0x40) << 1); // slicer - err[12] = saa7114_write_block(client, decoder->reg + (0x81 << 1), 2 << 1); // ? - err[13] = saa7114_write_block(client, decoder->reg + (0x83 << 1), 5 << 1); // ? - err[14] = saa7114_write_block(client, decoder->reg + (0x90 << 1), 4 << 1); // Task A - err[15] = - saa7114_write_block(client, decoder->reg + (0x94 << 1), - 12 << 1); - err[16] = - saa7114_write_block(client, decoder->reg + (0xa0 << 1), - 8 << 1); - err[17] = - saa7114_write_block(client, decoder->reg + (0xa8 << 1), - 8 << 1); - err[18] = - saa7114_write_block(client, decoder->reg + (0xb0 << 1), - 8 << 1); - err[19] = saa7114_write_block(client, decoder->reg + (0xc0 << 1), 4 << 1); // Task B - err[15] = - saa7114_write_block(client, decoder->reg + (0xc4 << 1), - 12 << 1); - err[16] = - saa7114_write_block(client, decoder->reg + (0xd0 << 1), - 8 << 1); - err[17] = - saa7114_write_block(client, decoder->reg + (0xd8 << 1), - 8 << 1); - err[18] = - saa7114_write_block(client, decoder->reg + (0xe0 << 1), - 8 << 1); - - for (i = 9; i <= 18; i++) { - if (err[i] < 0) { - v4l_dbg(1, debug, client, - "init error %d at stage %d, leaving attach.\n", - i, err[i]); - kfree(decoder); - return -EIO; - } - } - - - for (i = 6; i < 8; i++) { - v4l_dbg(1, debug, client, - "reg[0x%02x] = 0x%02x (0x%02x)\n", - i, saa7114_read(client, i), - decoder->reg[REG_ADDR(i)]); - } - - - for (i = 0x11; i <= 0x13; i++) { - v4l_dbg(1, debug, client, - "reg[0x%02x] = 0x%02x (0x%02x)\n", - i, saa7114_read(client, i), - decoder->reg[REG_ADDR(i)]); - } - - - v4l_dbg(1, debug, client, "setting video input\n"); - - err[19] = - saa7114_write(client, 0x02, decoder->reg[REG_ADDR(0x02)]); - err[20] = - saa7114_write(client, 0x09, decoder->reg[REG_ADDR(0x09)]); - err[21] = - saa7114_write(client, 0x0e, decoder->reg[REG_ADDR(0x0e)]); - - for (i = 19; i <= 21; i++) { - if (err[i] < 0) { - v4l_dbg(1, debug, client, - "init error %d at stage %d, leaving attach.\n", - i, err[i]); - kfree(decoder); - return -EIO; - } - } - - v4l_dbg(1, debug, client, "performing decoder reset sequence\n"); - - err[22] = saa7114_write(client, 0x88, 0xd8); // sw reset scaler - err[23] = saa7114_write(client, 0x88, 0xf8); // sw reset scaler release - err[24] = saa7114_write(client, 0x80, 0x36); // i-port and scaler backend clock selection, task A&B off - - - for (i = 22; i <= 24; i++) { - if (err[i] < 0) { - v4l_dbg(1, debug, client, - "init error %d at stage %d, leaving attach.\n", - i, err[i]); - kfree(decoder); - return -EIO; - } - } - - err[25] = saa7114_write(client, 0x06, init[REG_ADDR(0x06)]); - err[26] = saa7114_write(client, 0x07, init[REG_ADDR(0x07)]); - err[27] = saa7114_write(client, 0x10, init[REG_ADDR(0x10)]); - - v4l_dbg(1, debug, client, "chip version %x, decoder status 0x%02x\n", - saa7114_read(client, 0x00) >> 4, - saa7114_read(client, 0x1f)); - v4l_dbg(1, debug, client, - "power save control: 0x%02x, scaler status: 0x%02x\n", - saa7114_read(client, 0x88), - saa7114_read(client, 0x8f)); - - - for (i = 0x94; i < 0x96; i++) { - v4l_dbg(1, debug, client, - "reg[0x%02x] = 0x%02x (0x%02x)\n", - i, saa7114_read(client, i), - decoder->reg[REG_ADDR(i)]); - } - - //i = saa7114_write_block(client, init, sizeof(init)); - return 0; -} - -static int saa7114_remove(struct i2c_client *client) -{ - kfree(i2c_get_clientdata(client)); - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static const struct i2c_device_id saa7114_id[] = { - { "saa7114_old", 0 }, /* "saa7114" maps to the saa7115 driver */ - { } -}; -MODULE_DEVICE_TABLE(i2c, saa7114_id); - -static struct v4l2_i2c_driver_data v4l2_i2c_data = { - .name = "saa7114", - .driverid = I2C_DRIVERID_SAA7114, - .command = saa7114_command, - .probe = saa7114_probe, - .remove = saa7114_remove, - .id_table = saa7114_id, -}; diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c index 8d06bb312c55..fc51e6c9cb95 100644 --- a/drivers/media/video/saa7185.c +++ b/drivers/media/video/saa7185.c @@ -49,8 +49,7 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct saa7185 { unsigned char reg[128]; - int norm; - int enable; + v4l2_std_id norm; int bright; int contrast; int hue; @@ -218,68 +217,43 @@ static int saa7185_command(struct i2c_client *client, unsigned cmd, void *arg) struct saa7185 *encoder = i2c_get_clientdata(client); switch (cmd) { - case 0: + case VIDIOC_INT_INIT: saa7185_write_block(client, init_common, sizeof(init_common)); - switch (encoder->norm) { - - case VIDEO_MODE_NTSC: + if (encoder->norm & V4L2_STD_NTSC) saa7185_write_block(client, init_ntsc, sizeof(init_ntsc)); - break; - - case VIDEO_MODE_PAL: + else saa7185_write_block(client, init_pal, sizeof(init_pal)); - break; - } - break; - - case ENCODER_GET_CAPABILITIES: - { - struct video_encoder_capability *cap = arg; - - cap->flags = - VIDEO_ENCODER_PAL | VIDEO_ENCODER_NTSC | - VIDEO_ENCODER_SECAM | VIDEO_ENCODER_CCIR; - cap->inputs = 1; - cap->outputs = 1; break; - } - case ENCODER_SET_NORM: + case VIDIOC_INT_S_STD_OUTPUT: { - int *iarg = arg; + v4l2_std_id *iarg = arg; //saa7185_write_block(client, init_common, sizeof(init_common)); - switch (*iarg) { - case VIDEO_MODE_NTSC: + if (*iarg & V4L2_STD_NTSC) saa7185_write_block(client, init_ntsc, sizeof(init_ntsc)); - break; - - case VIDEO_MODE_PAL: + else if (*iarg & V4L2_STD_PAL) saa7185_write_block(client, init_pal, sizeof(init_pal)); - break; - - case VIDEO_MODE_SECAM: - default: + else return -EINVAL; - } encoder->norm = *iarg; break; } - case ENCODER_SET_INPUT: + case VIDIOC_INT_S_VIDEO_ROUTING: { - int *iarg = arg; + struct v4l2_routing *route = arg; - /* RJ: *iarg = 0: input is from SA7111 - *iarg = 1: input is from ZR36060 */ + /* RJ: route->input = 0: input is from SA7111 + route->input = 1: input is from ZR36060 */ - switch (*iarg) { + switch (route->input) { case 0: /* turn off colorbar */ saa7185_write(client, 0x3a, 0x0f); @@ -315,27 +289,6 @@ static int saa7185_command(struct i2c_client *client, unsigned cmd, void *arg) break; } - case ENCODER_SET_OUTPUT: - { - int *iarg = arg; - - /* not much choice of outputs */ - if (*iarg != 0) - return -EINVAL; - break; - } - - case ENCODER_ENABLE_OUTPUT: - { - int *iarg = arg; - - encoder->enable = !!*iarg; - saa7185_write(client, 0x61, - (encoder->reg[0x61] & 0xbf) | - (encoder->enable ? 0x00 : 0x40)); - break; - } - default: return -EINVAL; } @@ -365,8 +318,7 @@ static int saa7185_probe(struct i2c_client *client, encoder = kzalloc(sizeof(struct saa7185), GFP_KERNEL); if (encoder == NULL) return -ENOMEM; - encoder->norm = VIDEO_MODE_NTSC; - encoder->enable = 1; + encoder->norm = V4L2_STD_NTSC; i2c_set_clientdata(client, encoder); i = saa7185_write_block(client, init_common, sizeof(init_common)); diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c index 67aa0db4b81a..cd2064e7733b 100644 --- a/drivers/media/video/vpx3220.c +++ b/drivers/media/video/vpx3220.c @@ -27,6 +27,7 @@ #include #include #include +#include #include MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver"); @@ -44,7 +45,7 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); struct vpx3220 { unsigned char reg[255]; - int norm; + v4l2_std_id norm; int input; int enable; int bright; @@ -259,79 +260,41 @@ static const unsigned short init_fp[] = { 0x4b, 0x298, /* PLL gain */ }; -static void vpx3220_dump_i2c(struct i2c_client *client) -{ - int len = sizeof(init_common); - const unsigned char *data = init_common; - - while (len > 1) { - v4l_dbg(1, debug, client, "i2c reg 0x%02x data 0x%02x\n", - *data, vpx3220_read(client, *data)); - data += 2; - len -= 2; - } -} static int vpx3220_command(struct i2c_client *client, unsigned cmd, void *arg) { struct vpx3220 *decoder = i2c_get_clientdata(client); switch (cmd) { - case 0: + case VIDIOC_INT_INIT: { vpx3220_write_block(client, init_common, sizeof(init_common)); vpx3220_write_fp_block(client, init_fp, sizeof(init_fp) >> 1); - switch (decoder->norm) { - case VIDEO_MODE_NTSC: + if (decoder->norm & V4L2_STD_NTSC) { vpx3220_write_fp_block(client, init_ntsc, sizeof(init_ntsc) >> 1); - break; - - case VIDEO_MODE_PAL: + } else if (decoder->norm & V4L2_STD_PAL) { vpx3220_write_fp_block(client, init_pal, sizeof(init_pal) >> 1); - break; - case VIDEO_MODE_SECAM: + } else if (decoder->norm & V4L2_STD_SECAM) { vpx3220_write_fp_block(client, init_secam, sizeof(init_secam) >> 1); - break; - default: + } else { vpx3220_write_fp_block(client, init_pal, sizeof(init_pal) >> 1); - break; } break; } - case DECODER_DUMP: - { - vpx3220_dump_i2c(client); - break; - } - - case DECODER_GET_CAPABILITIES: - { - struct video_decoder_capability *cap = arg; - - v4l_dbg(1, debug, client, "DECODER_GET_CAPABILITIES\n"); - - cap->flags = VIDEO_DECODER_PAL | - VIDEO_DECODER_NTSC | - VIDEO_DECODER_SECAM | - VIDEO_DECODER_AUTO | - VIDEO_DECODER_CCIR; - cap->inputs = 3; - cap->outputs = 1; - break; - } - - case DECODER_GET_STATUS: + case VIDIOC_QUERYSTD: + case VIDIOC_INT_G_INPUT_STATUS: { - int res = 0, status; + int res = V4L2_IN_ST_NO_SIGNAL, status; + v4l2_std_id std = 0; - v4l_dbg(1, debug, client, "DECODER_GET_STATUS\n"); + v4l_dbg(1, debug, client, "VIDIOC_QUERYSTD/VIDIOC_INT_G_INPUT_STATUS\n"); status = vpx3220_fp_read(client, 0x0f3); @@ -341,35 +304,38 @@ static int vpx3220_command(struct i2c_client *client, unsigned cmd, void *arg) return status; if ((status & 0x20) == 0) { - res |= DECODER_STATUS_GOOD | DECODER_STATUS_COLOR; + res = 0; switch (status & 0x18) { case 0x00: case 0x10: case 0x14: case 0x18: - res |= DECODER_STATUS_PAL; + std = V4L2_STD_PAL; break; case 0x08: - res |= DECODER_STATUS_SECAM; + std = V4L2_STD_SECAM; break; case 0x04: case 0x0c: case 0x1c: - res |= DECODER_STATUS_NTSC; + std = V4L2_STD_NTSC; break; } } - *(int *) arg = res; + if (cmd == VIDIOC_QUERYSTD) + *(v4l2_std_id *)arg = std; + else + *(int *)arg = res; break; } - case DECODER_SET_NORM: + case VIDIOC_S_STD: { - int *iarg = arg, data; + v4l2_std_id *iarg = arg; int temp_input; /* Here we back up the input selection because it gets @@ -377,36 +343,23 @@ static int vpx3220_command(struct i2c_client *client, unsigned cmd, void *arg) choosen video norm */ temp_input = vpx3220_fp_read(client, 0xf2); - v4l_dbg(1, debug, client, "DECODER_SET_NORM %d\n", *iarg); - switch (*iarg) { - case VIDEO_MODE_NTSC: + v4l_dbg(1, debug, client, "VIDIOC_S_STD %llx\n", *iarg); + if (*iarg & V4L2_STD_NTSC) { vpx3220_write_fp_block(client, init_ntsc, sizeof(init_ntsc) >> 1); v4l_dbg(1, debug, client, "norm switched to NTSC\n"); - break; - - case VIDEO_MODE_PAL: + } else if (*iarg & V4L2_STD_PAL) { vpx3220_write_fp_block(client, init_pal, sizeof(init_pal) >> 1); v4l_dbg(1, debug, client, "norm switched to PAL\n"); - break; - - case VIDEO_MODE_SECAM: + } else if (*iarg & V4L2_STD_SECAM) { vpx3220_write_fp_block(client, init_secam, sizeof(init_secam) >> 1); v4l_dbg(1, debug, client, "norm switched to SECAM\n"); - break; - - case VIDEO_MODE_AUTO: - /* FIXME This is only preliminary support */ - data = vpx3220_fp_read(client, 0xf2) & 0x20; - vpx3220_fp_write(client, 0xf2, 0x00c0 | data); - v4l_dbg(1, debug, client, "norm switched to AUTO\n"); - break; - - default: + } else { return -EINVAL; } + decoder->norm = *iarg; /* And here we set the backed up video input again */ @@ -415,9 +368,10 @@ static int vpx3220_command(struct i2c_client *client, unsigned cmd, void *arg) break; } - case DECODER_SET_INPUT: + case VIDIOC_INT_S_VIDEO_ROUTING: { - int *iarg = arg, data; + struct v4l2_routing *route = arg; + int data; /* RJ: *iarg = 0: ST8 (PCTV) input *iarg = 1: COMPOSITE input @@ -429,73 +383,117 @@ static int vpx3220_command(struct i2c_client *client, unsigned cmd, void *arg) {0x0e, 1} }; - if (*iarg < 0 || *iarg > 2) + if (route->input < 0 || route->input > 2) return -EINVAL; - v4l_dbg(1, debug, client, "input switched to %s\n", inputs[*iarg]); + v4l_dbg(1, debug, client, "input switched to %s\n", inputs[route->input]); - vpx3220_write(client, 0x33, input[*iarg][0]); + vpx3220_write(client, 0x33, input[route->input][0]); data = vpx3220_fp_read(client, 0xf2) & ~(0x0020); if (data < 0) return data; /* 0x0010 is required to latch the setting */ vpx3220_fp_write(client, 0xf2, - data | (input[*iarg][1] << 5) | 0x0010); + data | (input[route->input][1] << 5) | 0x0010); udelay(10); break; } - case DECODER_SET_OUTPUT: + case VIDIOC_STREAMON: + case VIDIOC_STREAMOFF: { - int *iarg = arg; + int on = cmd == VIDIOC_STREAMON; + v4l_dbg(1, debug, client, "VIDIOC_STREAM%s\n", on ? "ON" : "OFF"); - /* not much choice of outputs */ - if (*iarg != 0) { - return -EINVAL; - } + vpx3220_write(client, 0xf2, (on ? 0x1b : 0x00)); break; } - case DECODER_ENABLE_OUTPUT: + case VIDIOC_QUERYCTRL: { - int *iarg = arg; + struct v4l2_queryctrl *qc = arg; - v4l_dbg(1, debug, client, "DECODER_ENABLE_OUTPUT %d\n", *iarg); + switch (qc->id) { + case V4L2_CID_BRIGHTNESS: + v4l2_ctrl_query_fill(qc, -128, 127, 1, 0); + break; + + case V4L2_CID_CONTRAST: + v4l2_ctrl_query_fill(qc, 0, 63, 1, 32); + break; + + case V4L2_CID_SATURATION: + v4l2_ctrl_query_fill(qc, 0, 4095, 1, 2048); + break; - vpx3220_write(client, 0xf2, (*iarg ? 0x1b : 0x00)); + case V4L2_CID_HUE: + v4l2_ctrl_query_fill(qc, -512, 511, 1, 0); + break; + + default: + return -EINVAL; + } break; } - case DECODER_SET_PICTURE: + case VIDIOC_G_CTRL: { - struct video_picture *pic = arg; + struct v4l2_control *ctrl = arg; - if (decoder->bright != pic->brightness) { - /* We want -128 to 128 we get 0-65535 */ - decoder->bright = pic->brightness; - vpx3220_write(client, 0xe6, - (decoder->bright - 32768) >> 8); - } - if (decoder->contrast != pic->contrast) { - /* We want 0 to 64 we get 0-65535 */ - /* Bit 7 and 8 is for noise shaping */ - decoder->contrast = pic->contrast; - vpx3220_write(client, 0xe7, - (decoder->contrast >> 10) + 192); - } - if (decoder->sat != pic->colour) { - /* We want 0 to 4096 we get 0-65535 */ - decoder->sat = pic->colour; - vpx3220_fp_write(client, 0xa0, - decoder->sat >> 4); + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = decoder->bright; + break; + case V4L2_CID_CONTRAST: + ctrl->value = decoder->contrast; + break; + case V4L2_CID_SATURATION: + ctrl->value = decoder->sat; + break; + case V4L2_CID_HUE: + ctrl->value = decoder->hue; + break; + default: + return -EINVAL; } - if (decoder->hue != pic->hue) { - /* We want -512 to 512 we get 0-65535 */ - decoder->hue = pic->hue; - vpx3220_fp_write(client, 0x1c, - ((decoder->hue - 32768) >> 6) & 0xFFF); + break; + } + + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + if (decoder->bright != ctrl->value) { + decoder->bright = ctrl->value; + vpx3220_write(client, 0xe6, decoder->bright); + } + break; + case V4L2_CID_CONTRAST: + if (decoder->contrast != ctrl->value) { + /* Bit 7 and 8 is for noise shaping */ + decoder->contrast = ctrl->value; + vpx3220_write(client, 0xe7, + decoder->contrast + 192); + } + break; + case V4L2_CID_SATURATION: + if (decoder->sat != ctrl->value) { + decoder->sat = ctrl->value; + vpx3220_fp_write(client, 0xa0, decoder->sat); + } + break; + case V4L2_CID_HUE: + if (decoder->hue != ctrl->value) { + decoder->hue = ctrl->value; + vpx3220_fp_write(client, 0x1c, decoder->hue); + } + break; + default: + return -EINVAL; } break; } @@ -541,7 +539,7 @@ static int vpx3220_probe(struct i2c_client *client, decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL); if (decoder == NULL) return -ENOMEM; - decoder->norm = VIDEO_MODE_PAL; + decoder->norm = V4L2_STD_PAL; decoder->input = 0; decoder->enable = 1; decoder->bright = 32768; diff --git a/drivers/media/video/zoran/Kconfig b/drivers/media/video/zoran/Kconfig index e35121fdf78a..fd4120e4c104 100644 --- a/drivers/media/video/zoran/Kconfig +++ b/drivers/media/video/zoran/Kconfig @@ -32,7 +32,7 @@ config VIDEO_ZORAN_ZR36060 config VIDEO_ZORAN_BUZ tristate "Iomega Buz support" depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO help Support for the Iomega Buz MJPEG capture/playback card. @@ -58,7 +58,7 @@ config VIDEO_ZORAN_LML33 config VIDEO_ZORAN_LML33R10 tristate "Linux Media Labs LML33R10 support" depends on VIDEO_ZORAN_ZR36060 - select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO + select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO help support for the Linux Media Labs LML33R10 MJPEG capture/playback diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 76668bda0494..ee31bfc3428f 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -352,7 +352,7 @@ struct card_info { char name[32]; } input[BUZ_MAX_INPUT]; - int norms; + v4l2_std_id norms; struct tvnorm *tvn[3]; /* supported TV norms */ u32 jpeg_int; /* JPEG interrupt */ @@ -401,8 +401,8 @@ struct zoran { spinlock_t spinlock; /* Spinlock */ /* Video for Linux parameters */ - int input, norm; /* card's norm and input - norm=VIDEO_MODE_* */ - int hue, saturation, contrast, brightness; /* Current picture params */ + int input; /* card's norm and input - norm=VIDEO_MODE_* */ + v4l2_std_id norm; struct video_buffer buffer; /* Current buffer params */ struct zoran_overlay_settings overlay_settings; u32 *overlay_mask; /* overlay mask */ diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 774717bf43cc..51ae37effdeb 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -340,11 +340,8 @@ i2cid_to_modulename (u16 i2c_id) case I2C_DRIVERID_SAA7110: name = "saa7110"; break; - case I2C_DRIVERID_SAA7111A: - name = "saa7111"; - break; - case I2C_DRIVERID_SAA7114: - name = "saa7114"; + case I2C_DRIVERID_SAA711X: + name = "saa7115"; break; case I2C_DRIVERID_SAA7185B: name = "saa7185"; @@ -439,7 +436,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 2, "S-Video" }, { 0, "Internal/comp" } }, - .norms = 3, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, .tvn = { &f50sqpixel_dc10, &f60sqpixel_dc10, @@ -467,7 +464,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 7, "S-Video" }, { 5, "Internal/comp" } }, - .norms = 3, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, .tvn = { &f50sqpixel, &f60sqpixel, @@ -494,7 +491,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 7, "S-Video" }, { 5, "Internal/comp" } }, - .norms = 3, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, .tvn = { &f50sqpixel, &f60sqpixel, @@ -523,7 +520,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 2, "S-Video" }, { 0, "Internal/comp" } }, - .norms = 3, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, .tvn = { &f50sqpixel_dc10, &f60sqpixel_dc10, @@ -552,7 +549,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 2, "S-Video" }, { 0, "Internal/comp" } }, - .norms = 3, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, .tvn = { &f50sqpixel_dc10, &f60sqpixel_dc10, @@ -579,7 +576,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 0, "Composite" }, { 7, "S-Video" } }, - .norms = 2, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL, .tvn = { &f50ccir601_lml33, &f60ccir601_lml33, @@ -597,7 +594,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = LML33R10, .name = "LML33R10", - .i2c_decoder = I2C_DRIVERID_SAA7114, + .i2c_decoder = I2C_DRIVERID_SAA711X, .i2c_encoder = I2C_DRIVERID_ADV7170, .video_codec = CODEC_TYPE_ZR36060, @@ -606,7 +603,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 0, "Composite" }, { 7, "S-Video" } }, - .norms = 2, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL, .tvn = { &f50ccir601_lm33r10, &f60ccir601_lm33r10, @@ -624,7 +621,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { }, { .type = BUZ, .name = "Buz", - .i2c_decoder = I2C_DRIVERID_SAA7111A, + .i2c_decoder = I2C_DRIVERID_SAA711X, .i2c_encoder = I2C_DRIVERID_SAA7185B, .video_codec = CODEC_TYPE_ZR36060, @@ -633,7 +630,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { { 3, "Composite" }, { 7, "S-Video" } }, - .norms = 3, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL|V4L2_STD_SECAM, .tvn = { &f50ccir601, &f60ccir601, @@ -670,7 +667,7 @@ static struct card_info zoran_cards[NUM_CARDS] __devinitdata = { {10, "S-Video 3" }, {15, "YCbCr" } }, - .norms = 2, + .norms = V4L2_STD_NTSC|V4L2_STD_PAL, .tvn = { &f50ccir601_avs6eyes, &f60ccir601_avs6eyes, @@ -1086,8 +1083,6 @@ static int __devinit zr36057_init (struct zoran *zr) { int j, err; - int two = 2; - int zero = 0; dprintk(1, KERN_INFO @@ -1113,14 +1108,23 @@ zr36057_init (struct zoran *zr) if (default_norm < VIDEO_MODE_PAL && default_norm > VIDEO_MODE_SECAM) default_norm = VIDEO_MODE_PAL; - zr->norm = default_norm; - if (!(zr->timing = zr->card.tvn[zr->norm])) { + if (default_norm == VIDEO_MODE_PAL) { + zr->norm = V4L2_STD_PAL; + zr->timing = zr->card.tvn[0]; + } else if (default_norm == VIDEO_MODE_NTSC) { + zr->norm = V4L2_STD_NTSC; + zr->timing = zr->card.tvn[1]; + } else { + zr->norm = V4L2_STD_SECAM; + zr->timing = zr->card.tvn[2]; + } + if (zr->timing == NULL) { dprintk(1, KERN_WARNING "%s: zr36057_init() - default TV standard not supported by hardware. PAL will be used.\n", ZR_DEVNAME(zr)); - zr->norm = VIDEO_MODE_PAL; - zr->timing = zr->card.tvn[zr->norm]; + zr->norm = V4L2_STD_PAL; + zr->timing = zr->card.tvn[0]; } if (default_input > zr->card.inputs-1) { @@ -1132,12 +1136,6 @@ zr36057_init (struct zoran *zr) } zr->input = default_input; - /* Should the following be reset at every open ? */ - zr->hue = 32768; - zr->contrast = 32768; - zr->saturation = 32768; - zr->brightness = 32768; - /* default setup (will be repeated at every open) */ zoran_open_init_params(zr); @@ -1173,8 +1171,10 @@ zr36057_init (struct zoran *zr) detect_guest_activity(zr); test_interrupts(zr); if (!pass_through) { - decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); - encoder_command(zr, ENCODER_SET_INPUT, &two); + struct v4l2_routing route = { 2, 0 }; + + decoder_command(zr, VIDIOC_STREAMOFF, 0); + encoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); } zr->zoran_proc = NULL; diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c index 1bcfa270d63d..712599a5ed72 100644 --- a/drivers/media/video/zoran/zoran_device.c +++ b/drivers/media/video/zoran/zoran_device.c @@ -37,6 +37,8 @@ #include #include #include +#include +#include #include #include @@ -312,9 +314,9 @@ zr36057_adjust_vfe (struct zoran *zr, case BUZ_MODE_MOTION_COMPRESS: case BUZ_MODE_IDLE: default: - if (zr->norm == VIDEO_MODE_NTSC || + if ((zr->norm & V4L2_STD_NTSC) || (zr->card.type == LML33R10 && - zr->norm == VIDEO_MODE_PAL)) + (zr->norm & V4L2_STD_PAL))) btand(~ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); else btor(ZR36057_VFESPFR_ExtFl, ZR36057_VFESPFR); @@ -355,14 +357,6 @@ zr36057_set_vfe (struct zoran *zr, dprintk(2, KERN_INFO "%s: set_vfe() - width = %d, height = %d\n", ZR_DEVNAME(zr), video_width, video_height); - if (zr->norm != VIDEO_MODE_PAL && - zr->norm != VIDEO_MODE_NTSC && - zr->norm != VIDEO_MODE_SECAM) { - dprintk(1, - KERN_ERR "%s: set_vfe() - norm = %d not valid\n", - ZR_DEVNAME(zr), zr->norm); - return; - } if (video_width < BUZ_MIN_WIDTH || video_height < BUZ_MIN_HEIGHT || video_width > Wa || video_height > Ha) { @@ -426,7 +420,7 @@ zr36057_set_vfe (struct zoran *zr, * we get the correct colors when uncompressing to the screen */ //reg |= ZR36057_VFESPFR_VCLKPol; /**/ /* RJ: Don't know if that is needed for NTSC also */ - if (zr->norm != VIDEO_MODE_NTSC) + if (!(zr->norm & V4L2_STD_NTSC)) reg |= ZR36057_VFESPFR_ExtFl; // NEEDED!!!!!!! Wolfgang reg |= ZR36057_VFESPFR_TopField; if (HorDcm >= 48) { @@ -981,11 +975,10 @@ void zr36057_enable_jpg (struct zoran *zr, enum zoran_codec_mode mode) { - static int zero; - static int one = 1; struct vfe_settings cap; int field_size = zr->jpg_buffers.buffer_size / zr->jpg_settings.field_per_buff; + struct v4l2_routing route = { 0, 0 }; zr->codec_mode = mode; @@ -1007,8 +1000,9 @@ zr36057_enable_jpg (struct zoran *zr, * the video bus direction set to input. */ set_videobus_dir(zr, 0); - decoder_command(zr, DECODER_ENABLE_OUTPUT, &one); - encoder_command(zr, ENCODER_SET_INPUT, &zero); + decoder_command(zr, VIDIOC_STREAMON, 0); + route.input = 0; + encoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); /* Take the JPEG codec and the VFE out of sleep */ jpeg_codec_sleep(zr, 0); @@ -1054,9 +1048,10 @@ zr36057_enable_jpg (struct zoran *zr, /* In motion decompression mode, the decoder output must be disabled, and * the video bus direction set to output. */ - decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); + decoder_command(zr, VIDIOC_STREAMOFF, 0); set_videobus_dir(zr, 1); - encoder_command(zr, ENCODER_SET_INPUT, &one); + route.input = 1; + encoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); /* Take the JPEG codec and the VFE out of sleep */ jpeg_codec_sleep(zr, 0); @@ -1100,8 +1095,9 @@ zr36057_enable_jpg (struct zoran *zr, jpeg_codec_sleep(zr, 1); zr36057_adjust_vfe(zr, mode); - decoder_command(zr, DECODER_ENABLE_OUTPUT, &one); - encoder_command(zr, ENCODER_SET_INPUT, &zero); + decoder_command(zr, VIDIOC_STREAMON, 0); + route.input = 0; + encoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); dprintk(2, KERN_INFO "%s: enable_jpg(IDLE)\n", ZR_DEVNAME(zr)); break; @@ -1211,17 +1207,17 @@ zoran_reap_stat_com (struct zoran *zr) static void zoran_restart(struct zoran *zr) { /* Now the stat_comm buffer is ready for restart */ - int status, mode; + int status = 0, mode; if (zr->codec_mode == BUZ_MODE_MOTION_COMPRESS) { - decoder_command(zr, DECODER_GET_STATUS, &status); + decoder_command(zr, VIDIOC_INT_G_INPUT_STATUS, &status); mode = CODEC_DO_COMPRESSION; } else { - status = 0; + status = V4L2_IN_ST_NO_SIGNAL; mode = CODEC_DO_EXPANSION; } if (zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS || - (status & DECODER_STATUS_GOOD)) { + !(status & V4L2_IN_ST_NO_SIGNAL)) { /********** RESTART code *************/ jpeg_codec_reset(zr); zr->codec->set_mode(zr->codec, mode); @@ -1582,7 +1578,7 @@ zoran_set_pci_master (struct zoran *zr, void zoran_init_hardware (struct zoran *zr) { - int j, zero = 0; + struct v4l2_routing route = { 0, 0 }; /* Enable bus-mastering */ zoran_set_pci_master(zr, 1); @@ -1592,15 +1588,16 @@ zoran_init_hardware (struct zoran *zr) zr->card.init(zr); } - j = zr->card.input[zr->input].muxsel; + route.input = zr->card.input[zr->input].muxsel; - decoder_command(zr, 0, NULL); - decoder_command(zr, DECODER_SET_NORM, &zr->norm); - decoder_command(zr, DECODER_SET_INPUT, &j); + decoder_command(zr, VIDIOC_INT_INIT, NULL); + decoder_command(zr, VIDIOC_S_STD, &zr->norm); + decoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); - encoder_command(zr, 0, NULL); - encoder_command(zr, ENCODER_SET_NORM, &zr->norm); - encoder_command(zr, ENCODER_SET_INPUT, &zero); + encoder_command(zr, VIDIOC_INT_INIT, NULL); + encoder_command(zr, VIDIOC_INT_S_STD_OUTPUT, &zr->norm); + route.input = 0; + encoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); /* toggle JPEG codec sleep to sync PLL */ jpeg_codec_sleep(zr, 1); @@ -1674,7 +1671,7 @@ decoder_command (struct zoran *zr, return -EIO; if (zr->card.type == LML33 && - (cmd == DECODER_SET_NORM || cmd == DECODER_SET_INPUT)) { + (cmd == VIDIOC_S_STD || cmd == VIDIOC_INT_S_VIDEO_ROUTING)) { int res; // Bt819 needs to reset its FIFO buffer using #FRST pin and diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 07f2bdfef4ee..ed8ac660a0c1 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1145,9 +1145,10 @@ zoran_close(struct file *file) zoran_set_pci_master(zr, 0); if (!pass_through) { /* Switch to color bar */ - int zero = 0, two = 2; - decoder_command(zr, DECODER_ENABLE_OUTPUT, &zero); - encoder_command(zr, ENCODER_SET_INPUT, &two); + struct v4l2_routing route = { 2, 0 }; + + decoder_command(zr, VIDIOC_STREAMOFF, 0); + encoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); } } @@ -1569,9 +1570,9 @@ zoran_v4l2_buffer_status (struct file *file, static int zoran_set_norm (struct zoran *zr, - int norm) /* VIDEO_MODE_* */ + v4l2_std_id norm) { - int norm_encoder, on; + int on; if (zr->v4l_buffers.active != ZORAN_FREE || zr->jpg_buffers.active != ZORAN_FREE) { @@ -1598,52 +1599,42 @@ zoran_set_norm (struct zoran *zr, } } - if (norm != VIDEO_MODE_AUTO && - (norm < 0 || norm >= zr->card.norms || - !zr->card.tvn[norm])) { + if (!(norm & zr->card.norms)) { dprintk(1, - KERN_ERR "%s: set_norm() - unsupported norm %d\n", + KERN_ERR "%s: set_norm() - unsupported norm %llx\n", ZR_DEVNAME(zr), norm); return -EINVAL; } - if (norm == VIDEO_MODE_AUTO) { - int status; + if (norm == V4L2_STD_ALL) { + int status = 0; + v4l2_std_id std = 0; - /* if we have autodetect, ... */ - struct video_decoder_capability caps; - decoder_command(zr, DECODER_GET_CAPABILITIES, &caps); - if (!(caps.flags & VIDEO_DECODER_AUTO)) { - dprintk(1, KERN_ERR "%s: norm=auto unsupported\n", - ZR_DEVNAME(zr)); - return -EINVAL; - } - - decoder_command(zr, DECODER_SET_NORM, &norm); + decoder_command(zr, VIDIOC_QUERYSTD, &std); + decoder_command(zr, VIDIOC_S_STD, &std); /* let changes come into effect */ ssleep(2); - decoder_command(zr, DECODER_GET_STATUS, &status); - if (!(status & DECODER_STATUS_GOOD)) { + decoder_command(zr, VIDIOC_INT_G_INPUT_STATUS, &status); + if (status & V4L2_IN_ST_NO_SIGNAL) { dprintk(1, KERN_ERR "%s: set_norm() - no norm detected\n", ZR_DEVNAME(zr)); /* reset norm */ - decoder_command(zr, DECODER_SET_NORM, &zr->norm); + decoder_command(zr, VIDIOC_S_STD, &zr->norm); return -EIO; } - if (status & DECODER_STATUS_NTSC) - norm = VIDEO_MODE_NTSC; - else if (status & DECODER_STATUS_SECAM) - norm = VIDEO_MODE_SECAM; - else - norm = VIDEO_MODE_PAL; + norm = std; } - zr->timing = zr->card.tvn[norm]; - norm_encoder = norm; + if (norm & V4L2_STD_SECAM) + zr->timing = zr->card.tvn[2]; + else if (norm & V4L2_STD_NTSC) + zr->timing = zr->card.tvn[1]; + else + zr->timing = zr->card.tvn[0]; /* We switch overlay off and on since a change in the * norm needs different VFE settings */ @@ -1651,8 +1642,8 @@ zoran_set_norm (struct zoran *zr, if (on) zr36057_overlay(zr, 0); - decoder_command(zr, DECODER_SET_NORM, &norm); - encoder_command(zr, ENCODER_SET_NORM, &norm_encoder); + decoder_command(zr, VIDIOC_S_STD, &norm); + encoder_command(zr, VIDIOC_INT_S_STD_OUTPUT, &norm); if (on) zr36057_overlay(zr, 1); @@ -1667,7 +1658,7 @@ static int zoran_set_input (struct zoran *zr, int input) { - int realinput; + struct v4l2_routing route = { 0, 0 }; if (input == zr->input) { return 0; @@ -1690,10 +1681,10 @@ zoran_set_input (struct zoran *zr, return -EINVAL; } - realinput = zr->card.input[input].muxsel; + route.input = zr->card.input[input].muxsel; zr->input = input; - decoder_command(zr, DECODER_SET_INPUT, &realinput); + decoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); return 0; } @@ -1722,7 +1713,13 @@ static long zoran_default(struct file *file, void *__fh, int cmd, void *arg) mutex_lock(&zr->resource_lock); - bparams->norm = zr->norm; + if (zr->norm & V4L2_STD_NTSC) + bparams->norm = VIDEO_MODE_NTSC; + else if (zr->norm & V4L2_STD_PAL) + bparams->norm = VIDEO_MODE_PAL; + else + bparams->norm = VIDEO_MODE_SECAM; + bparams->input = zr->input; bparams->decimation = fh->jpg_settings.decimation; @@ -1905,7 +1902,9 @@ jpgreqbuf_unlock_and_return: case BUZIOC_G_STATUS: { struct zoran_status *bstat = arg; - int norm, input, status, res = 0; + struct v4l2_routing route = { 0, 0 }; + int status = 0, res = 0; + v4l2_std_id norm; dprintk(3, KERN_DEBUG "%s: BUZIOC_G_STATUS\n", ZR_DEVNAME(zr)); @@ -1917,8 +1916,7 @@ jpgreqbuf_unlock_and_return: return -EINVAL; } - input = zr->card.input[bstat->input].muxsel; - norm = VIDEO_MODE_AUTO; + route.input = zr->card.input[bstat->input].muxsel; mutex_lock(&zr->resource_lock); @@ -1931,34 +1929,33 @@ jpgreqbuf_unlock_and_return: goto gstat_unlock_and_return; } - decoder_command(zr, DECODER_SET_INPUT, &input); - decoder_command(zr, DECODER_SET_NORM, &norm); + decoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); /* sleep 1 second */ ssleep(1); /* Get status of video decoder */ - decoder_command(zr, DECODER_GET_STATUS, &status); + decoder_command(zr, VIDIOC_QUERYSTD, &norm); + decoder_command(zr, VIDIOC_INT_G_INPUT_STATUS, &status); /* restore previous input and norm */ - input = zr->card.input[zr->input].muxsel; - decoder_command(zr, DECODER_SET_INPUT, &input); - decoder_command(zr, DECODER_SET_NORM, &zr->norm); + route.input = zr->card.input[zr->input].muxsel; + decoder_command(zr, VIDIOC_INT_S_VIDEO_ROUTING, &route); gstat_unlock_and_return: mutex_unlock(&zr->resource_lock); if (!res) { bstat->signal = - (status & DECODER_STATUS_GOOD) ? 1 : 0; - if (status & DECODER_STATUS_NTSC) + (status & V4L2_IN_ST_NO_SIGNAL) ? 0 : 1; + if (norm & V4L2_STD_NTSC) bstat->norm = VIDEO_MODE_NTSC; - else if (status & DECODER_STATUS_SECAM) + else if (norm & V4L2_STD_SECAM) bstat->norm = VIDEO_MODE_SECAM; else bstat->norm = VIDEO_MODE_PAL; bstat->color = - (status & DECODER_STATUS_COLOR) ? 1 : 0; + (status & V4L2_IN_ST_NO_COLOR) ? 0 : 1; } return res; @@ -2867,37 +2864,15 @@ strmoff_unlock_and_return: static int zoran_queryctrl(struct file *file, void *__fh, struct v4l2_queryctrl *ctrl) { + struct zoran_fh *fh = __fh; + struct zoran *zr = fh->zr; + /* we only support hue/saturation/contrast/brightness */ if (ctrl->id < V4L2_CID_BRIGHTNESS || ctrl->id > V4L2_CID_HUE) return -EINVAL; - else { - int id = ctrl->id; - memset(ctrl, 0, sizeof(*ctrl)); - ctrl->id = id; - } - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - strncpy(ctrl->name, "Brightness", sizeof(ctrl->name)-1); - break; - case V4L2_CID_CONTRAST: - strncpy(ctrl->name, "Contrast", sizeof(ctrl->name)-1); - break; - case V4L2_CID_SATURATION: - strncpy(ctrl->name, "Saturation", sizeof(ctrl->name)-1); - break; - case V4L2_CID_HUE: - strncpy(ctrl->name, "Hue", sizeof(ctrl->name)-1); - break; - } - ctrl->minimum = 0; - ctrl->maximum = 65535; - ctrl->step = 1; - ctrl->default_value = 32768; - ctrl->type = V4L2_CTRL_TYPE_INTEGER; - ctrl->flags = V4L2_CTRL_FLAG_SLIDER; + decoder_command(zr, VIDIOC_QUERYCTRL, ctrl); return 0; } @@ -2913,20 +2888,7 @@ static int zoran_g_ctrl(struct file *file, void *__fh, struct v4l2_control *ctrl return -EINVAL; mutex_lock(&zr->resource_lock); - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = zr->brightness; - break; - case V4L2_CID_CONTRAST: - ctrl->value = zr->contrast; - break; - case V4L2_CID_SATURATION: - ctrl->value = zr->saturation; - break; - case V4L2_CID_HUE: - ctrl->value = zr->hue; - break; - } + decoder_command(zr, VIDIOC_G_CTRL, ctrl); mutex_unlock(&zr->resource_lock); return 0; @@ -2936,42 +2898,14 @@ static int zoran_s_ctrl(struct file *file, void *__fh, struct v4l2_control *ctrl { struct zoran_fh *fh = __fh; struct zoran *zr = fh->zr; - struct video_picture pict; /* we only support hue/saturation/contrast/brightness */ if (ctrl->id < V4L2_CID_BRIGHTNESS || ctrl->id > V4L2_CID_HUE) return -EINVAL; - if (ctrl->value < 0 || ctrl->value > 65535) { - dprintk(1, KERN_ERR - "%s: VIDIOC_S_CTRL - invalid value %d for id=%d\n", - ZR_DEVNAME(zr), ctrl->value, ctrl->id); - return -EINVAL; - } - mutex_lock(&zr->resource_lock); - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - zr->brightness = ctrl->value; - break; - case V4L2_CID_CONTRAST: - zr->contrast = ctrl->value; - break; - case V4L2_CID_SATURATION: - zr->saturation = ctrl->value; - break; - case V4L2_CID_HUE: - zr->hue = ctrl->value; - break; - } - pict.brightness = zr->brightness; - pict.contrast = zr->contrast; - pict.colour = zr->saturation; - pict.hue = zr->hue; - - decoder_command(zr, DECODER_SET_PICTURE, &pict); - + decoder_command(zr, VIDIOC_S_CTRL, ctrl); mutex_unlock(&zr->resource_lock); return 0; @@ -2981,24 +2915,10 @@ static int zoran_g_std(struct file *file, void *__fh, v4l2_std_id *std) { struct zoran_fh *fh = __fh; struct zoran *zr = fh->zr; - int norm; mutex_lock(&zr->resource_lock); - norm = zr->norm; + *std = zr->norm; mutex_unlock(&zr->resource_lock); - - switch (norm) { - case VIDEO_MODE_PAL: - *std = V4L2_STD_PAL; - break; - case VIDEO_MODE_NTSC: - *std = V4L2_STD_NTSC; - break; - case VIDEO_MODE_SECAM: - *std = V4L2_STD_SECAM; - break; - } - return 0; } @@ -3006,25 +2926,10 @@ static int zoran_s_std(struct file *file, void *__fh, v4l2_std_id *std) { struct zoran_fh *fh = __fh; struct zoran *zr = fh->zr; - int norm = -1, res = 0; - - if ((*std & V4L2_STD_PAL) && !(*std & ~V4L2_STD_PAL)) - norm = VIDEO_MODE_PAL; - else if ((*std & V4L2_STD_NTSC) && !(*std & ~V4L2_STD_NTSC)) - norm = VIDEO_MODE_NTSC; - else if ((*std & V4L2_STD_SECAM) && !(*std & ~V4L2_STD_SECAM)) - norm = VIDEO_MODE_SECAM; - else if (*std == V4L2_STD_ALL) - norm = VIDEO_MODE_AUTO; - else { - dprintk(1, KERN_ERR - "%s: VIDIOC_S_STD - invalid norm 0x%llx\n", - ZR_DEVNAME(zr), (unsigned long long)*std); - return -EINVAL; - } + int res = 0; mutex_lock(&zr->resource_lock); - res = zoran_set_norm(zr, norm); + res = zoran_set_norm(zr, *std); if (res) goto sstd_unlock_and_return; @@ -3039,7 +2944,6 @@ static int zoran_enum_input(struct file *file, void *__fh, { struct zoran_fh *fh = __fh; struct zoran *zr = fh->zr; - int status; if (inp->index < 0 || inp->index >= zr->card.inputs) return -EINVAL; @@ -3056,16 +2960,8 @@ static int zoran_enum_input(struct file *file, void *__fh, /* Get status of video decoder */ mutex_lock(&zr->resource_lock); - decoder_command(zr, DECODER_GET_STATUS, &status); + decoder_command(zr, VIDIOC_INT_G_INPUT_STATUS, &inp->status); mutex_unlock(&zr->resource_lock); - - if (!(status & DECODER_STATUS_GOOD)) { - inp->status |= V4L2_IN_ST_NO_POWER; - inp->status |= V4L2_IN_ST_NO_SIGNAL; - } - if (!(status & DECODER_STATUS_COLOR)) - inp->status |= V4L2_IN_ST_NO_COLOR; - return 0; } -- cgit v1.2.3-59-g8ed1b