From bf6ee0ae494596aaf311e8430684db85d1d2f25c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 3 Oct 2006 22:17:48 +0200 Subject: remove mentionings of devfs in documentation Now that devfs is removed, there's no longer any need to document how to do this or that with devfs. This patch includes some improvements by Joe Perches. Signed-off-by: Adrian Bunk --- drivers/media/radio/Kconfig | 3 +-- drivers/media/video/pwc/philips.txt | 4 ++-- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 7015517e2c1b..6d96b17a7f81 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -195,8 +195,7 @@ config RADIO_MIROPCM20_RDS ---help--- Choose Y here if you want to see RDS/RBDS information like RadioText, Programme Service name, Clock Time and date, Programme - TYpe and Traffic Announcement/Programme identification. You also - need to say Y to "miroSOUND PCM20 radio" and devfs! + Type and Traffic Announcement/Programme identification. It's not possible to read the raw RDS packets from the device, so the driver cant provide an V4L interface for this. But the diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt index 11f751a6bda5..f5e848410311 100644 --- a/drivers/media/video/pwc/philips.txt +++ b/drivers/media/video/pwc/philips.txt @@ -175,8 +175,8 @@ dev_hint - If a device node is already occupied, registration will fail and the webcam is not available. - You can have up to 64 video devices; be sure to make enough device - nodes in /dev if you want to spread the numbers (this does not apply - to devfs). After /dev/video9 comes /dev/video10 (not /dev/videoA). + nodes in /dev if you want to spread the numbers. + After /dev/video9 comes /dev/video10 (not /dev/videoA). - If a camera does not match any dev_hint, it will simply get assigned the first available device node, just as it used to be. -- cgit v1.2.3-59-g8ed1b From 095096038d637c477ef3c1b674612bcbc4d60c2d Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Tue, 3 Oct 2006 22:31:37 +0200 Subject: Fix several typos in drivers/ Signed-off-by: Adrian Bunk --- drivers/firmware/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 4 ++-- drivers/ieee1394/Kconfig | 2 +- drivers/input/keyboard/Kconfig | 2 +- drivers/input/serio/Kconfig | 4 ++-- drivers/isdn/hardware/eicon/Kconfig | 2 +- drivers/isdn/hisax/Kconfig | 2 +- drivers/macintosh/Kconfig | 2 +- drivers/media/dvb/cinergyT2/Kconfig | 2 +- drivers/media/video/Kconfig | 2 +- drivers/mtd/chips/Kconfig | 2 +- drivers/mtd/nand/Kconfig | 2 +- drivers/mtd/onenand/Kconfig | 2 +- drivers/net/wireless/Kconfig | 2 +- drivers/rapidio/Kconfig | 2 +- drivers/scsi/Kconfig | 4 ++-- drivers/scsi/aic7xxx/Kconfig.aic79xx | 4 ++-- drivers/scsi/aic7xxx/Kconfig.aic7xxx | 4 ++-- drivers/serial/Kconfig | 6 +++--- drivers/usb/storage/Kconfig | 2 +- drivers/video/Kconfig | 8 ++++---- drivers/w1/Kconfig | 2 +- 22 files changed, 32 insertions(+), 32 deletions(-) (limited to 'drivers/media') diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 731c3d5da0dc..88f462122a30 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -64,7 +64,7 @@ config DELL_RBU help Say m if you want to have the option of updating the BIOS for your DELL system. Note you need a Dell OpenManage or Dell Update package (DUP) - supporting application to comunicate with the BIOS regarding the new + supporting application to communicate with the BIOS regarding the new image for the image update to take effect. See for more details on the driver. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 0d9667921f61..510816c16da3 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -333,10 +333,10 @@ config I2C_PARPORT_LIGHT This driver is a light version of i2c-parport. It doesn't depend on the parport driver, and uses direct I/O access instead. This - might be prefered on embedded systems where wasting memory for + might be preferred on embedded systems where wasting memory for the clean but heavy parport handling is not an option. The drawback is a reduced portability and the impossibility to - dasiy-chain other parallel port devices. + daisy-chain other parallel port devices. Don't say Y here if you said Y or M to i2c-parport. Saying M to both is possible but both modules should not be loaded at the same diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index 2769e505f051..672b92ef9f21 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -140,7 +140,7 @@ config IEEE1394_SBP2_PHYS_DMA help This builds sbp2 for use with non-OHCI host adapters which do not support physical DMA or for when ohci1394 is run with phys_dma=0. - Physical DMA is data movement without assistence of the drivers' + Physical DMA is data movement without assistance of the drivers' interrupt handlers. This option includes the interrupt handlers that are required in absence of this hardware feature. diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index c62e00c79dec..679bde34d247 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -177,7 +177,7 @@ config KEYBOARD_HIL_OLD However, it has been thoroughly tested and is stable. If you want full HIL support including support for multiple - keyboards, mices and tablets, you have to enable the + keyboards, mice, and tablets, you have to enable the "HP System Device Controller i8042 Support" in the input/serio submenu. diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 98acf170252c..8cdbfeca5903 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -115,9 +115,9 @@ config HP_SDC depends on GSC && SERIO default y ---help--- - This option enables supports for the the "System Device + This option enables support for the "System Device Controller", an i8042 carrying microcode to manage a - few miscellanous devices on some Hewlett Packard systems. + few miscellaneous devices on some Hewlett Packard systems. The SDC itself contains a 10ms resolution timer/clock capable of delivering interrupts on a periodic and one-shot basis. The SDC may also be connected to a battery-backed real-time diff --git a/drivers/isdn/hardware/eicon/Kconfig b/drivers/isdn/hardware/eicon/Kconfig index 51e66bc64208..01d4afd9d843 100644 --- a/drivers/isdn/hardware/eicon/Kconfig +++ b/drivers/isdn/hardware/eicon/Kconfig @@ -47,7 +47,7 @@ config ISDN_DIVAS_MAINT tristate "DIVA Maint driver support" depends on ISDN_DIVAS && m help - Enable Divas Maintainance driver. + Enable Divas Maintenance driver. endmenu diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 6dfc94122dd9..eb57a988e048 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -321,7 +321,7 @@ config HISAX_HFC_PCI help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. - For more informations see under + For more information see under . config HISAX_W6692 diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index d5d649f5ccdb..7f8477d3a661 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -186,7 +186,7 @@ config THERM_ADT746X depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the - iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty + iBook G4, and the ATI based aluminium PowerBooks, allowing slightly better fan behaviour by default, and some manual control. config THERM_PM72 diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig index b5cdd57ec6f5..3d778c5aba68 100644 --- a/drivers/media/dvb/cinergyT2/Kconfig +++ b/drivers/media/dvb/cinergyT2/Kconfig @@ -56,7 +56,7 @@ config DVB_CINERGYT2_QUERY_INTERVAL measurements. Please keep in mind that these updates cause traffic on the tuner - control bus and thus may or may not affect receiption sensitivity. + control bus and thus may or may not affect reception sensitivity. The default value should be a safe choice for common applications. diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index d1183c939221..f6779a422f1b 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -351,7 +351,7 @@ config VIDEO_SAA6588 help Support for Radio Data System (RDS) decoder. This allows seeing radio station identification transmitted using this standard. - Currentlly, it works only with bt8x8 chips. + Currently, it works only with bt8x8 chips. To compile this driver as a module, choose M here: the module will be called saa6588. diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index 6d8f30deb868..72e6d73beb40 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -270,7 +270,7 @@ config MTD_JEDEC tristate "JEDEC device support" depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN help - Enable older older JEDEC flash interface devices for self + Enable older JEDEC flash interface devices for self programming flash. It is commonly used in older AMD chips. It is only called JEDEC because the JEDEC association distributes the identification codes for the diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c99302ed3823..1831340e5f51 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -21,7 +21,7 @@ config MTD_NAND_VERIFY_WRITE NAND flash device internally checks only bits transitioning from 1 to 0. There is a rare possibility that even though the device thinks the write was successful, a bit could have been - flipped accidentaly due to device wear or something else. + flipped accidentally due to device wear or something else. config MTD_NAND_ECC_SMC bool "NAND ECC Smart Media byte order" diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 465961b8bcd1..373bddce8f1c 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -21,7 +21,7 @@ config MTD_ONENAND_VERIFY_WRITE OneNAND flash device internally checks only bits transitioning from 1 to 0. There is a rare possibility that even though the device thinks the write was successful, a bit could have been - flipped accidentaly due to device wear or something else. + flipped accidentally due to device wear or something else. config MTD_ONENAND_GENERIC tristate "OneNAND Flash device via platform device driver" diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index bd4a68c85a47..ece3d9c2dc61 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -301,7 +301,7 @@ config HERMES tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA) ---help--- - A driver for 802.11b wireless cards based based on the "Hermes" or + A driver for 802.11b wireless cards based on the "Hermes" or Intersil HFA384x (Prism 2) MAC controller. This includes the vast majority of the PCMCIA 802.11b cards (which are nearly all rebadges) - except for the Cisco/Aironet cards. Cards supported include the diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig index 0b2d2c3579a7..4142115d298e 100644 --- a/drivers/rapidio/Kconfig +++ b/drivers/rapidio/Kconfig @@ -15,4 +15,4 @@ config RAPIDIO_DISC_TIMEOUT default "30" ---help--- Amount of time a discovery node waits for a host to complete - enumeration beforing giving up. + enumeration before giving up. diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index dab082002e6f..8ee2ca1fdab1 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -40,10 +40,10 @@ config SCSI_PROC_FS default y ---help--- This option enables support for the various files in - /proc/scsi. In Linux 2.6 this has been superceeded by + /proc/scsi. In Linux 2.6 this has been superseded by files in sysfs but many legacy applications rely on this. - If unusure say Y. + If unsure say Y. comment "SCSI support type (disk, tape, CD-ROM)" depends on SCSI diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx index 7955ebe8e1e8..911ea1756e55 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic79xx +++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx @@ -22,12 +22,12 @@ config AIC79XX_CMDS_PER_DEVICE to be used for any device. The aic7xxx driver will automatically vary this number based on device behavior. For devices with a fixed maximum, the driver will eventually lock to this maximum - and display a console message inidicating this value. + and display a console message indicating this value. Due to resource allocation issues in the Linux SCSI mid-layer, using a high number of commands per device may result in memory allocation failures when many devices are attached to the system. For this reason, - the default is set to 32. Higher values may result in higer performance + the default is set to 32. Higher values may result in higher performance on some devices. The upper bound is 253. 0 disables tagged queueing. Per device tag depth can be controlled via the kernel command line diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx index 5517da5855f0..cd93f9a8611f 100644 --- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx +++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx @@ -27,12 +27,12 @@ config AIC7XXX_CMDS_PER_DEVICE to be used for any device. The aic7xxx driver will automatically vary this number based on device behavior. For devices with a fixed maximum, the driver will eventually lock to this maximum - and display a console message inidicating this value. + and display a console message indicating this value. Due to resource allocation issues in the Linux SCSI mid-layer, using a high number of commands per device may result in memory allocation failures when many devices are attached to the system. For this reason, - the default is set to 32. Higher values may result in higer performance + the default is set to 32. Higher values may result in higher performance on some devices. The upper bound is 253. 0 disables tagged queueing. Per device tag depth can be controlled via the kernel command line diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index d926272a40db..653098bc2dd5 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -121,7 +121,7 @@ config SERIAL_8250_RUNTIME_UARTS default "4" help Set this to the maximum number of serial ports you want - the kernel to register at boot time. This can be overriden + the kernel to register at boot time. This can be overridden with the module parameter "nr_uarts", or boot-time parameter 8250.nr_uarts @@ -205,7 +205,7 @@ config SERIAL_8250_BOCA depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS help Say Y here if you have a Boca serial board. Please read the Boca - mini-HOWTO, avaialble from + mini-HOWTO, available from To compile this driver as a module, choose M here: the module will be called 8250_boca. @@ -667,7 +667,7 @@ config SERIAL_68328 depends on M68328 || M68EZ328 || M68VZ328 help This driver supports the built-in serial port of the Motorola 68328 - (standard, EZ and VZ varities). + (standard, EZ and VZ varieties). config SERIAL_68328_RTS_CTS bool "Support RTS/CTS on 68328 serial port" diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 422a4b288e34..fe2c4cd53f5a 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -119,7 +119,7 @@ config USB_STORAGE_ALAUDA Say Y here to include additional code to support the Olympus MAUSB-10 and Fujifilm DPC-R1 USB Card reader/writer devices. - These devices are based on the Alauda chip and support support both + These devices are based on the Alauda chip and support both XD and SmartMedia cards. config USB_STORAGE_ONETOUCH diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index a1c8923b0bf5..4608a275955f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -403,7 +403,7 @@ config FB_ARC is based on the KS-108 lcd controller and is typically a matrix of 2*n chips. This driver was tested with a 128x64 panel. This driver supports it for use with x86 SBCs through a 16 bit GPIO - interface (8 bit data, 8 bit control). If you anticpate using + interface (8 bit data, 8 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. @@ -771,7 +771,7 @@ config FB_RIVA_DEBUG default n help Say Y here if you want the Riva driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. config FB_RIVA_BACKLIGHT @@ -865,7 +865,7 @@ config FB_INTEL_DEBUG depends on FB_INTEL ---help--- Say Y here if you want the Intel driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. config FB_INTEL_I2C @@ -1062,7 +1062,7 @@ config FB_RADEON_DEBUG default n help Say Y here if you want the Radeon driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. config FB_ATY128 diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index 8b3d0f0c7bd5..27c9d05d03ef 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -21,7 +21,7 @@ config W1_CON There are three types of messages between w1 core and userspace: 1. Events. They are generated each time new master or slave device found either due to automatic or requested search. - 2. Userspace commands. Includes read/write and search/alarm search comamnds. + 2. Userspace commands. Includes read/write and search/alarm search commands. 3. Replies to userspace commands. source drivers/w1/masters/Kconfig -- cgit v1.2.3-59-g8ed1b From cab00891c5489cb6d0cde0a55d39bd5f2871fa70 Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Tue, 3 Oct 2006 22:36:44 +0200 Subject: Still more typo fixes Signed-off-by: Adrian Bunk --- arch/arm/mach-s3c2410/Kconfig | 2 +- arch/ppc/platforms/85xx/Kconfig | 14 +++++++------- arch/xtensa/Kconfig | 4 ++-- drivers/infiniband/ulp/ipoib/Kconfig | 2 +- drivers/media/video/cx88/Kconfig | 2 +- drivers/net/Kconfig | 2 +- drivers/pci/hotplug/Kconfig | 2 +- drivers/usb/atm/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- drivers/video/Kconfig | 2 +- fs/Kconfig | 2 +- fs/cifs/README | 6 +++--- net/ipv4/Kconfig | 2 +- net/ipv4/ipvs/Kconfig | 2 +- security/selinux/Kconfig | 2 +- 15 files changed, 24 insertions(+), 24 deletions(-) (limited to 'drivers/media') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index df37594c30f8..63965c78de8c 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -13,7 +13,7 @@ config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 help - Say Y gere if you are using the Simtec Electronics ANUBIS + Say Y here if you are using the Simtec Electronics ANUBIS development system config MACH_OSIRIS diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig index 7ddd331a7145..6f2d0add7de6 100644 --- a/arch/ppc/platforms/85xx/Kconfig +++ b/arch/ppc/platforms/85xx/Kconfig @@ -24,12 +24,12 @@ config MPC8540_ADS config MPC8548_CDS bool "Freescale MPC8548 CDS" help - This option enablese support for the MPC8548 CDS evaluation board. + This option enables support for the MPC8548 CDS evaluation board. config MPC8555_CDS bool "Freescale MPC8555 CDS" help - This option enablese support for the MPC8555 CDS evaluation board. + This option enables support for the MPC8555 CDS evaluation board. config MPC8560_ADS bool "Freescale MPC8560 ADS" @@ -51,22 +51,22 @@ config STX_GP3 config TQM8540 bool "TQ Components TQM8540" help - This option enablese support for the TQ Components TQM8540 board. + This option enables support for the TQ Components TQM8540 board. config TQM8541 bool "TQ Components TQM8541" help - This option enablese support for the TQ Components TQM8541 board. + This option enables support for the TQ Components TQM8541 board. config TQM8555 bool "TQ Components TQM8555" help - This option enablese support for the TQ Components TQM8555 board. + This option enables support for the TQ Components TQM8555 board. config TQM8560 bool "TQ Components TQM8560" help - This option enablese support for the TQ Components TQM8560 board. + This option enables support for the TQ Components TQM8560 board. endchoice @@ -94,7 +94,7 @@ config MPC8560 default y config 85xx_PCI2 - bool "Supprt for 2nd PCI host controller" + bool "Support for 2nd PCI host controller" depends on MPC8555_CDS default y diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 848f173db257..c1e69a1f92a4 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -206,7 +206,7 @@ source "drivers/pci/hotplug/Kconfig" endmenu -menu "Exectuable file formats" +menu "Executable file formats" # only elf supported config KCORE_ELF @@ -241,7 +241,7 @@ menu "Xtensa initrd options" bool "Embed root filesystem ramdisk into the kernel" config EMBEDDED_RAMDISK_IMAGE - string "Filename of gziped ramdisk image" + string "Filename of gzipped ramdisk image" depends on EMBEDDED_RAMDISK default "ramdisk.gz" help diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index d74653d7de1c..c75322d820d4 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -26,7 +26,7 @@ config INFINIBAND_IPOIB_DEBUG_DATA bool "IP-over-InfiniBand data path debugging" depends on INFINIBAND_IPOIB_DEBUG ---help--- - This option compiles debugging code into the the data path + This option compiles debugging code into the data path of the IPoIB driver. The output can be turned on via the data_debug_level module parameter; however, even with output turned off, this debugging code will have some performance diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 51d68f32aa06..0f9d96963618 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -69,6 +69,6 @@ config VIDEO_CX88_VP3054 depends on VIDEO_CX88_DVB && DVB_MT352 ---help--- This adds DVB-T support for cards based on the - Connexant 2388x chip and the MT352 demodulator, + Conexant 2388x chip and the MT352 demodulator, which also require support for the VP-3054 Secondary I2C bus, such at DNTV Live! DVB-T Pro. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ff8a8c0a26d5..ab92cc794c64 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2115,7 +2115,7 @@ config SKY2 depends on PCI && EXPERIMENTAL select CRC32 ---help--- - This driver supports Gigabit Ethernet adapters based on the the + This driver supports Gigabit Ethernet adapters based on the Marvell Yukon 2 chipset: Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 8a60f391ffcf..6e780db9454d 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -157,7 +157,7 @@ config HOTPLUG_PCI_RPA tristate "RPA PCI Hotplug driver" depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE help - Say Y here if you have a a RPA system that supports PCI Hotplug. + Say Y here if you have a RPA system that supports PCI Hotplug. To compile this driver as a module, choose M here: the module will be called rpaphp. diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index 550ddfa71a43..b450cbaa3a0b 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -64,7 +64,7 @@ config USB_XUSBATM Say Y here if you have a DSL USB modem not explicitly supported by another USB DSL drivers. In order to use your modem you will need to pass the vendor ID, product ID, and endpoint numbers for transmission - and reception as module parameters. You may need to initialize the + and reception as module parameters. You may need to initialize the modem using a user space utility (a firmware loader for example). To compile this driver as a module, choose M here: the diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 8e5dd6f29d0b..bbbc82a8336a 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -7,7 +7,7 @@ # # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). -# - Some systems have both kinds of of controller. +# - Some systems have both kinds of controllers. # # With help from a special transceiver and a "Mini-AB" jack, systems with # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4608a275955f..daaa486159cf 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -188,7 +188,7 @@ config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" help This is an implementation of the Sharp LQ035Q7DB02, a 3.5" - color QVGA, HRTFT panel. The LogicPD device includes an + color QVGA, HRTFT panel. The LogicPD device includes an integrated HRTFT controller IC. The native resolution is 240x320. diff --git a/fs/Kconfig b/fs/Kconfig index deaad99ffadb..68f4561423ff 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1365,7 +1365,7 @@ config SYSV_FS If you have floppies or hard disk partitions like that, it is likely that they contain binaries from those other Unix systems; in order - to run these binaries, you will want to install linux-abi which is a + to run these binaries, you will want to install linux-abi which is a set of kernel modules that lets you run SCO, Xenix, Wyse, UnixWare, Dell Unix and System V programs under Linux. It is available via FTP (user: ftp) from diff --git a/fs/cifs/README b/fs/cifs/README index 5f0e1bd64fee..432e515431c4 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -269,7 +269,7 @@ A partial list of the supported mount options follows: (gid) mount option is specified. For the uid (gid) of newly created files and directories, ie files created since the last mount of the server share, the expected uid - (gid) is cached as as long as the inode remains in + (gid) is cached as long as the inode remains in memory on the client. Also note that permission checks (authorization checks) on accesses to a file occur at the server, but there are cases in which an administrator @@ -375,7 +375,7 @@ A partial list of the supported mount options follows: the local process on newly created files, directories, and devices (create, mkdir, mknod). If the CIFS Unix Extensions are not negotiated, for newly created files and directories - instead of using the default uid and gid specified on the + instead of using the default uid and gid specified on the mount, cache the new file's uid and gid locally which means that the uid for the file can change when the inode is reloaded (or the user remounts the share). @@ -440,7 +440,7 @@ A partial list of the supported mount options follows: create device files and fifos in a format compatible with Services for Unix (SFU). In addition retrieve bits 10-12 of the mode via the SETFILEBITS extended attribute (as - SFU does). In the future the bottom 9 bits of the mode + SFU does). In the future the bottom 9 bits of the mode also will be emulated using queries of the security descriptor (ACL). sign Must use packet signing (helps avoid unwanted data modification diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 0adfd88b7b0b..d172a9804448 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -556,7 +556,7 @@ config TCP_CONG_LP default n ---help--- TCP Low Priority (TCP-LP), a distributed algorithm whose goal is - to utiliza only the excess network bandwidth as compared to the + to utilize only the excess network bandwidth as compared to the ``fair share`` of bandwidth as targeted by TCP. See http://www-ece.rice.edu/networks/TCP-LP/ diff --git a/net/ipv4/ipvs/Kconfig b/net/ipv4/ipvs/Kconfig index ad52c294d219..891b9355cf96 100644 --- a/net/ipv4/ipvs/Kconfig +++ b/net/ipv4/ipvs/Kconfig @@ -204,7 +204,7 @@ config IP_VS_SED connections to the server with the shortest expected delay. The expected delay that the job will experience is (Ci + 1) / Ui if sent to the ith server, in which Ci is the number of connections - on the the ith server and Ui is the fixed service rate (weight) + on the ith server and Ui is the fixed service rate (weight) of the ith server. If you want to compile it in kernel, say Y. To compile it as a diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig index d62b09843127..23b51047494e 100644 --- a/security/selinux/Kconfig +++ b/security/selinux/Kconfig @@ -122,7 +122,7 @@ config SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT well as any conntrack helpers for protocols which you wish to control. - If you are unsure what do do here, select N. + If you are unsure what to do here, select N. config SECURITY_SELINUX_POLICYDB_VERSION_MAX bool "NSA SELinux maximum supported policy format version" -- cgit v1.2.3-59-g8ed1b