From 3a6ffb3c8c3274a39dc8f2514526e645c5d21753 Mon Sep 17 00:00:00 2001 From: Andreas Koop Date: Mon, 22 Jul 2019 12:03:06 +0800 Subject: mmc: mmc_spi: Enable stable writes While using the mmc_spi driver occasionally errors like this popped up: mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 581756 I looked on the Internet for occurrences of the same problem and came across a helpful post [1]. It includes source code to reproduce the bug. There is also an analysis about the cause. During transmission data in the supplied buffer is being modified. Thus the previously calculated checksum is not correct anymore. After some digging I found out that device drivers are supposed to report they need stable writes. To fix this I set the appropriate flag at queue initialization if CRC checksumming is enabled for that SPI host. [1] https://groups.google.com/forum/#!msg/sim1/gLlzWeXGFr8/KevXinUXfc8J Signed-off-by: Andreas Koop [shihpo: Rebase on top of v5.3-rc1] Signed-off-by: ShihPo Hung Cc: Paul Walmsley CC: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/core/queue.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index e327f80ebe70..7102e2ebc614 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -427,6 +428,10 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card) goto free_tag_set; } + if (mmc_host_is_spi(host) && host->use_spi_crc) + mq->queue->backing_dev_info->capabilities |= + BDI_CAP_STABLE_WRITES; + mq->queue->queuedata = mq; blk_queue_rq_timeout(mq->queue, 60 * HZ); -- cgit v1.2.3-59-g8ed1b