From 3bbb0deea6d5c6d5ed38ae927a5bf9b0cd7c8639 Mon Sep 17 00:00:00 2001 From: Chaotian Jing Date: Mon, 30 Nov 2015 09:27:30 +0800 Subject: mmc: core: fix __mmc_switch timeout caused by preempt there is a time window between __mmc_send_status() and time_afer(), on some eMMC chip, the timeout_ms is only 10ms, if this thread was scheduled out during this period, then, even card has already changes to transfer state by the result of CMD13, this part of code also treat it to timeout error. So, need calculate timeout first, then call __mmc_send_status(), if already timeout and card still in programing state, then treat it to the real timeout error. Signed-off-by: Chaotian Jing Signed-off-by: Ulf Hansson --- drivers/mmc/core/mmc_ops.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 1f444269ebbe..2c90635c89af 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -489,6 +489,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, unsigned long timeout; u32 status = 0; bool use_r1b_resp = use_busy_signal; + bool expired = false; mmc_retune_hold(host); @@ -545,6 +546,12 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, timeout = jiffies + msecs_to_jiffies(timeout_ms); do { if (send_status) { + /* + * Due to the possibility of being preempted after + * sending the status command, check the expiration + * time first. + */ + expired = time_after(jiffies, timeout); err = __mmc_send_status(card, &status, ignore_crc); if (err) goto out; @@ -565,7 +572,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, } /* Timeout if the device never leaves the program state. */ - if (time_after(jiffies, timeout)) { + if (expired && R1_CURRENT_STATE(status) == R1_STATE_PRG) { pr_err("%s: Card stuck in programming state! %s\n", mmc_hostname(host), __func__); err = -ETIMEDOUT; -- cgit v1.2.3-59-g8ed1b