From 64a67d4762ce3ce4c9466eadd152d825fbf84967 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Wed, 20 Jan 2016 16:08:03 +0100 Subject: mmc: pwrseq_simple: Make reset-gpios optional to match doc The DT binding doc says reset-gpios is an optional property but the code currently bails out if it is omitted. This is a regression since it breaks previously working device trees. Fix it by restoring the original documented behaviour. Fixes: ce037275861e ("mmc: pwrseq_simple: use GPIO descriptors array API") Tested-by: Tony Lindgren Signed-off-by: Martin Fuzzey Signed-off-by: Ulf Hansson --- drivers/mmc/core/pwrseq_simple.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 2b16263458af..aba786daebca 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -29,15 +29,18 @@ struct mmc_pwrseq_simple { static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, int value) { - int i; struct gpio_descs *reset_gpios = pwrseq->reset_gpios; - int values[reset_gpios->ndescs]; - for (i = 0; i < reset_gpios->ndescs; i++) - values[i] = value; + if (!IS_ERR(reset_gpios)) { + int i; + int values[reset_gpios->ndescs]; - gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc, - values); + for (i = 0; i < reset_gpios->ndescs; i++) + values[i] = value; + + gpiod_set_array_value_cansleep( + reset_gpios->ndescs, reset_gpios->desc, values); + } } static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) @@ -79,7 +82,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); - gpiod_put_array(pwrseq->reset_gpios); + if (!IS_ERR(pwrseq->reset_gpios)) + gpiod_put_array(pwrseq->reset_gpios); if (!IS_ERR(pwrseq->ext_clk)) clk_put(pwrseq->ext_clk); @@ -112,7 +116,9 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, } pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpios)) { + if (IS_ERR(pwrseq->reset_gpios) && + PTR_ERR(pwrseq->reset_gpios) != -ENOENT && + PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) { ret = PTR_ERR(pwrseq->reset_gpios); goto clk_put; } -- cgit v1.2.3-59-g8ed1b