From 100f2341e305f98de3aa12fb472771ab029cbda7 Mon Sep 17 00:00:00 2001 From: Tadashi Abe Date: Thu, 19 May 2011 15:58:15 +0900 Subject: mtd: fix hang-up in cfi erase and read contention cfi erase command hangs up when erase and read contention occurs. If read runs at the same address as erase operation, read issues Erase-Suspend via get_chip() and the erase goes into sleep in wait queue. But in this case, read operation exits by time-out without waking it up. I think the other variants (0001, 0020 and lpddr) have the same problem too. Tested and verified the patch only on CFI-0002 flash, though. Signed-off-by: Tadashi Abe Acked-by: Joakim Tjernlund Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/mtd/chips/cfi_cmdset_0001.c') diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 09cb7c8d93b4..121be022d1ea 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -812,12 +812,9 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long break; if (time_after(jiffies, timeo)) { - /* Urgh. Resume and pretend we weren't here. */ - map_write(map, CMD(0xd0), adr); - /* Make sure we're in 'read status' mode if it had finished */ - map_write(map, CMD(0x70), adr); - chip->state = FL_ERASING; - chip->oldstate = FL_READY; + /* Urgh. Resume and pretend we weren't here. + * Make sure we're in 'read status' mode if it had finished */ + put_chip(map, chip, adr); printk(KERN_ERR "%s: Chip not ready after erase " "suspended: status = 0x%lx\n", map->name, status.x[0]); return -EIO; -- cgit v1.2.3-59-g8ed1b