From 01ac742db34fec11469724dc350a417790dbbbbe Mon Sep 17 00:00:00 2001 From: Sean Young Date: Wed, 29 Jun 2005 09:46:19 +0000 Subject: [MTD] maps/Kconfig: Simplify and update dependencies Signed-off-by: Thomas Gleixner --- drivers/mtd/maps/Kconfig | 61 +++++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 29 deletions(-) (limited to 'drivers/mtd/maps') diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 7f1ce08fb7b1..94a693f4bea7 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -94,7 +94,10 @@ config MTD_NETSC520 config MTD_TS5500 tristate "JEDEC Flash device mapped on Technologic Systems TS-5500" - depends on X86 && MTD_JEDECPROBE && MTD_PARTITIONS + depends on ELAN + select MTD_PARTITIONS + select MTD_JEDECPROBE + select MTD_CFI_AMDSTD help This provides a driver for the on-board flash of the Technologic System's TS-5500 board. The 2MB flash is split into 3 partitions @@ -210,7 +213,7 @@ config MTD_NETtel config MTD_ALCHEMY tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' - depends on MIPS && SOC_AU1X00 + depends on SOC_AU1X00 help Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards @@ -248,14 +251,14 @@ config MTD_L440GX config MTD_SBC8240 tristate "Flash device on SBC8240" - depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260 + depends on MTD_JEDECPROBE && 8260 help Flash access on the SBC8240 board from Wind River. See config MTD_TQM8XXL tristate "CFI Flash device mapped on TQM8XXL" - depends on MTD_CFI && PPC32 && 8xx && TQM8xxL + depends on MTD_CFI && TQM8xxL help The TQM8xxL PowerPC board has up to two banks of CFI-compliant chips, currently uses AMD one. This 'mapping' driver supports @@ -265,7 +268,7 @@ config MTD_TQM8XXL config MTD_RPXLITE tristate "CFI Flash device mapped on RPX Lite or CLLF" - depends on MTD_CFI && PPC32 && 8xx && (RPXCLASSIC || RPXLITE) + depends on MTD_CFI && (RPXCLASSIC || RPXLITE) help The RPXLite PowerPC board has CFI-compliant chips mapped in a strange sparse mapping. This 'mapping' driver supports that @@ -275,7 +278,7 @@ config MTD_RPXLITE config MTD_MBX860 tristate "System flash on MBX860 board" - depends on MTD_CFI && PPC32 && 8xx && MBX + depends on MTD_CFI && MBX help This enables access routines for the flash chips on the Motorola MBX860 board. If you have one of these boards and would like @@ -283,7 +286,7 @@ config MTD_MBX860 config MTD_DBOX2 tristate "CFI Flash device mapped on D-Box2" - depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD + depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD help This enables access routines for the flash chips on the Nokia/Sagem D-Box 2 board. If you have one of these boards and would like to use @@ -291,14 +294,14 @@ config MTD_DBOX2 config MTD_CFI_FLAGADM tristate "CFI Flash device mapping on FlagaDM" - depends on PPC32 && 8xx && MTD_CFI + depends on 8xx && MTD_CFI help Mapping for the Flaga digital module. If you don't have one, ignore this setting. config MTD_BEECH tristate "CFI Flash device mapped on IBM 405LP Beech" - depends on MTD_CFI && PPC32 && 40x && BEECH + depends on MTD_CFI && BEECH help This enables access routines for the flash chips on the IBM 405LP Beech board. If you have one of these boards and would like @@ -306,7 +309,7 @@ config MTD_BEECH config MTD_ARCTIC tristate "CFI Flash device mapped on IBM 405LP Arctic" - depends on MTD_CFI && PPC32 && 40x && ARCTIC2 + depends on MTD_CFI && ARCTIC2 help This enables access routines for the flash chips on the IBM 405LP Arctic board. If you have one of these boards and would like to @@ -314,7 +317,7 @@ config MTD_ARCTIC config MTD_WALNUT tristate "Flash device mapped on IBM 405GP Walnut" - depends on MTD_JEDECPROBE && PPC32 && 40x && WALNUT + depends on MTD_JEDECPROBE && WALNUT help This enables access routines for the flash chips on the IBM 405GP Walnut board. If you have one of these boards and would like to @@ -322,7 +325,7 @@ config MTD_WALNUT config MTD_EBONY tristate "Flash devices mapped on IBM 440GP Ebony" - depends on MTD_JEDECPROBE && PPC32 && 44x && EBONY + depends on MTD_JEDECPROBE && EBONY help This enables access routines for the flash chips on the IBM 440GP Ebony board. If you have one of these boards and would like to @@ -330,7 +333,7 @@ config MTD_EBONY config MTD_OCOTEA tristate "Flash devices mapped on IBM 440GX Ocotea" - depends on MTD_CFI && PPC32 && 44x && OCOTEA + depends on MTD_CFI && OCOTEA help This enables access routines for the flash chips on the IBM 440GX Ocotea board. If you have one of these boards and would like to @@ -338,7 +341,7 @@ config MTD_OCOTEA config MTD_REDWOOD tristate "CFI Flash devices mapped on IBM Redwood" - depends on MTD_CFI && PPC32 && 4xx && 40x && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 ) + depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 ) help This enables access routines for the flash chips on the IBM Redwood board. If you have one of these boards and would like to @@ -409,14 +412,14 @@ config MTD_ARM_INTEGRATOR config MTD_CDB89712 tristate "Cirrus CDB89712 evaluation board mappings" - depends on ARM && MTD_CFI && ARCH_CDB89712 + depends on MTD_CFI && ARCH_CDB89712 help This enables access to the flash or ROM chips on the CDB89712 board. If you have such a board, say 'Y'. config MTD_SA1100 tristate "CFI Flash device mapped on StrongARM SA11x0" - depends on ARM && MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS + depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS help This enables access to the flash chips on most platforms based on the SA1100 and SA1110, including the Assabet and the Compaq iPAQ. @@ -424,13 +427,13 @@ config MTD_SA1100 config MTD_IPAQ tristate "CFI Flash device mapped on Compaq/HP iPAQ" - depends on ARM && IPAQ_HANDHELD && MTD_CFI + depends on IPAQ_HANDHELD && MTD_CFI help This provides a driver for the on-board flash of the iPAQ. config MTD_DC21285 tristate "CFI Flash device mapped on DC21285 Footbridge" - depends on ARM && MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS + depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS help This provides a driver for the flash accessed using Intel's 21285 bridge used with Intel's StrongARM processors. More info at @@ -438,7 +441,7 @@ config MTD_DC21285 config MTD_IQ80310 tristate "CFI Flash device mapped on the XScale IQ80310 board" - depends on ARM && MTD_CFI && ARCH_IQ80310 + depends on MTD_CFI && ARCH_IQ80310 help This enables access routines for the flash chips on the Intel XScale IQ80310 evaluation board. If you have one of these boards and would @@ -446,7 +449,7 @@ config MTD_IQ80310 config MTD_IXP4XX tristate "CFI Flash device mapped on Intel IXP4xx based systems" - depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX + depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX help This enables MTD access to flash devices on platforms based on Intel's IXP4xx family of network processors such as the @@ -455,7 +458,7 @@ config MTD_IXP4XX config MTD_IXP2000 tristate "CFI Flash device mapped on Intel IXP2000 based systems" - depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 + depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 help This enables MTD access to flash devices on platforms based on Intel's IXP2000 family of network processors such as the @@ -464,7 +467,7 @@ config MTD_IXP2000 config MTD_EPXA10DB tristate "CFI Flash device mapped on Epxa10db" - depends on ARM && MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT + depends on MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT help This enables support for the flash devices on the Altera Excalibur XA10 Development Board. If you are building a kernel @@ -472,21 +475,21 @@ config MTD_EPXA10DB config MTD_FORTUNET tristate "CFI Flash device mapped on the FortuNet board" - depends on ARM && MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET + depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET help This enables access to the Flash on the FortuNet board. If you have such a board, say 'Y'. config MTD_AUTCPU12 tristate "NV-RAM mapping AUTCPU12 board" - depends on ARM && ARCH_AUTCPU12 + depends on ARCH_AUTCPU12 help This enables access to the NV-RAM on autronix autcpu12 board. If you have such a board, say 'Y'. config MTD_EDB7312 tristate "CFI Flash device mapped on EDB7312" - depends on ARM && MTD_CFI + depends on ARCH_EDB7312 && MTD_CFI help This enables access to the CFI Flash on the Cogent EDB7312 board. If you have such a board, say 'Y' here. @@ -500,7 +503,7 @@ config MTD_IMPA7 config MTD_CEIVA tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame" - depends on ARM && MTD_JEDECPROBE && ARCH_CEIVA + depends on MTD_JEDECPROBE && ARCH_CEIVA help This enables access to the flash chips on the Ceiva/Polaroid PhotoMax Digital Picture Frame. @@ -508,21 +511,21 @@ config MTD_CEIVA config MTD_NOR_TOTO tristate "NOR Flash device on TOTO board" - depends on ARM && ARCH_OMAP && OMAP_TOTO + depends on ARCH_OMAP && OMAP_TOTO help This enables access to the NOR flash on the Texas Instruments TOTO board. config MTD_H720X tristate "Hynix evaluation board mappings" - depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 ) + depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 ) help This enables access to the flash chips on the Hynix evaluation boards. If you have such a board, say 'Y'. config MTD_MPC1211 tristate "CFI Flash device mapped on Interface MPC-1211" - depends on SUPERH && SH_MPC1211 && MTD_CFI + depends on SH_MPC1211 && MTD_CFI help This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02). If you have such a board, say 'Y'. -- cgit v1.2.3-59-g8ed1b