From 577e010c24bceb80dbbc146b2a4bd7ff0527fa9b Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 25 Jul 2018 15:31:41 +0200 Subject: mtd: rawnand: atmel: convert driver to nand_scan() Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal Reviewed-by: Boris Brezillon --- drivers/mtd/nand/raw/atmel/nand-controller.c | 113 +++++++++++++-------------- 1 file changed, 54 insertions(+), 59 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index 143d029710f0..a068b214ebaa 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -201,7 +201,7 @@ struct atmel_nand_controller_ops { int (*remove)(struct atmel_nand_controller *nc); void (*nand_init)(struct atmel_nand_controller *nc, struct atmel_nand *nand); - int (*ecc_init)(struct atmel_nand *nand); + int (*ecc_init)(struct nand_chip *chip); int (*setup_data_interface)(struct atmel_nand *nand, int csline, const struct nand_data_interface *conf); }; @@ -1132,9 +1132,8 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip) return 0; } -static int atmel_nand_ecc_init(struct atmel_nand *nand) +static int atmel_nand_ecc_init(struct nand_chip *chip) { - struct nand_chip *chip = &nand->base; struct atmel_nand_controller *nc; int ret; @@ -1169,12 +1168,11 @@ static int atmel_nand_ecc_init(struct atmel_nand *nand) return 0; } -static int atmel_hsmc_nand_ecc_init(struct atmel_nand *nand) +static int atmel_hsmc_nand_ecc_init(struct nand_chip *chip) { - struct nand_chip *chip = &nand->base; int ret; - ret = atmel_nand_ecc_init(nand); + ret = atmel_nand_ecc_init(chip); if (ret) return ret; @@ -1557,22 +1555,6 @@ static void atmel_hsmc_nand_init(struct atmel_nand_controller *nc, chip->select_chip = atmel_hsmc_nand_select_chip; } -static int atmel_nand_detect(struct atmel_nand *nand) -{ - struct nand_chip *chip = &nand->base; - struct mtd_info *mtd = nand_to_mtd(chip); - struct atmel_nand_controller *nc; - int ret; - - nc = to_nand_controller(chip->controller); - - ret = nand_scan_ident(mtd, nand->numcs, NULL); - if (ret) - dev_err(nc->dev, "nand_scan_ident() failed: %d\n", ret); - - return ret; -} - static int atmel_nand_controller_remove_nand(struct atmel_nand *nand) { struct nand_chip *chip = &nand->base; @@ -1700,6 +1682,8 @@ static int atmel_nand_controller_add_nand(struct atmel_nand_controller *nc, struct atmel_nand *nand) { + struct nand_chip *chip = &nand->base; + struct mtd_info *mtd = nand_to_mtd(chip); int ret; /* No card inserted, skip this NAND. */ @@ -1710,44 +1694,9 @@ atmel_nand_controller_add_nand(struct atmel_nand_controller *nc, nc->caps->ops->nand_init(nc, nand); - ret = atmel_nand_detect(nand); - if (ret) - return ret; - - ret = nc->caps->ops->ecc_init(nand); - if (ret) - return ret; - - if (nc->caps->legacy_of_bindings || !nc->dev->of_node) { - /* - * We keep the MTD name unchanged to avoid breaking platforms - * where the MTD cmdline parser is used and the bootloader - * has not been updated to use the new naming scheme. - */ - mtd->name = "atmel_nand"; - } else if (!mtd->name) { - /* - * If the new bindings are used and the bootloader has not been - * updated to pass a new mtdparts parameter on the cmdline, you - * should define the following property in your nand node: - * - * label = "atmel_nand"; - * - * This way, mtd->name will be set by the core when - * nand_set_flash_node() is called. - */ - mtd->name = devm_kasprintf(nc->dev, GFP_KERNEL, - "%s:nand.%d", dev_name(nc->dev), - nand->cs[0].id); - if (!mtd->name) { - dev_err(nc->dev, "Failed to allocate mtd->name\n"); - return -ENOMEM; - } - } - - ret = nand_scan_tail(mtd); + ret = nand_scan(mtd, nand->numcs); if (ret) { - dev_err(nc->dev, "nand_scan_tail() failed: %d\n", ret); + dev_err(nc->dev, "NAND scan failed: %d\n", ret); return ret; } @@ -1945,6 +1894,51 @@ static const struct of_device_id atmel_matrix_of_ids[] = { { /* sentinel */ }, }; +static int atmel_nand_attach_chip(struct nand_chip *chip) +{ + struct atmel_nand_controller *nc = to_nand_controller(chip->controller); + struct atmel_nand *nand = to_atmel_nand(chip); + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; + + ret = nc->caps->ops->ecc_init(chip); + if (ret) + return ret; + + if (nc->caps->legacy_of_bindings || !nc->dev->of_node) { + /* + * We keep the MTD name unchanged to avoid breaking platforms + * where the MTD cmdline parser is used and the bootloader + * has not been updated to use the new naming scheme. + */ + mtd->name = "atmel_nand"; + } else if (!mtd->name) { + /* + * If the new bindings are used and the bootloader has not been + * updated to pass a new mtdparts parameter on the cmdline, you + * should define the following property in your nand node: + * + * label = "atmel_nand"; + * + * This way, mtd->name will be set by the core when + * nand_set_flash_node() is called. + */ + mtd->name = devm_kasprintf(nc->dev, GFP_KERNEL, + "%s:nand.%d", dev_name(nc->dev), + nand->cs[0].id); + if (!mtd->name) { + dev_err(nc->dev, "Failed to allocate mtd->name\n"); + return -ENOMEM; + } + } + + return 0; +} + +static const struct nand_controller_ops atmel_nand_controller_ops = { + .attach_chip = atmel_nand_attach_chip, +}; + static int atmel_nand_controller_init(struct atmel_nand_controller *nc, struct platform_device *pdev, const struct atmel_nand_controller_caps *caps) @@ -1954,6 +1948,7 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc, int ret; nand_controller_init(&nc->base); + nc->base.ops = &atmel_nand_controller_ops; INIT_LIST_HEAD(&nc->chips); nc->dev = dev; nc->caps = caps; -- cgit v1.2.3-59-g8ed1b