From f382a0a8e9403c6d7f8b2cfa21e41fefb5d0c9bd Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 12 Aug 2008 07:13:14 -0600 Subject: [netdrvr] atl1e: Don't take the mdio_lock in atl1e_probe Lockdep warns about the mdio_lock taken with interrupts enabled then later taken from interrupt context. Initially, I considered changing these to spin_lock_irq/spin_unlock_irq, but then I looked at atl1e_phy_init() and saw that it calls msleep(). Sleeping while holding a spinlock is not allowed either. In the probe path, we haven't registered the interrupt handler, so it can't poke at this card yet. It's before we call register_netdev(), so I don't think any other threads can reach this card either. If I'm right, we don't need a spinlock at all. Signed-off-by: Matthew Wilcox Signed-off-by: Jeff Garzik --- drivers/net/atl1e/atl1e_main.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net/atl1e/atl1e_main.c') diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index 7685b995ff9b..9b603528143d 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -2390,9 +2390,7 @@ static int __devinit atl1e_probe(struct pci_dev *pdev, } /* Init GPHY as early as possible due to power saving issue */ - spin_lock(&adapter->mdio_lock); atl1e_phy_init(&adapter->hw); - spin_unlock(&adapter->mdio_lock); /* reset the controller to * put the device in a known good starting state */ err = atl1e_reset_hw(&adapter->hw); -- cgit v1.2.3-59-g8ed1b