From 58d56fcc3964f9be0a9ca42fd126bcd9dc7afc90 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 10 May 2018 13:17:37 -0700 Subject: net: dsa: bcm_sf2: Get rid of PHYLIB functions Now that we have converted the bcm_sf2 driver to implement PHYLINK MAC operations, we can remove the PHYLIB callbacks: adjust_link() and fixed_link_update() which are no longer called by DSA. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 149 ---------------------------------------------- 1 file changed, 149 deletions(-) (limited to 'drivers/net/dsa/bcm_sf2.c') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index a20608b0329e..ac621f44237a 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -480,153 +480,6 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port) return priv->hw_params.gphy_rev; } -static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - struct ethtool_eee *p = &priv->dev->ports[port].eee; - u32 id_mode_dis = 0, port_mode; - const char *str = NULL; - u32 reg, offset; - - if (priv->type == BCM7445_DEVICE_ID) - offset = CORE_STS_OVERRIDE_GMIIP_PORT(port); - else - offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port); - - switch (phydev->interface) { - case PHY_INTERFACE_MODE_RGMII: - str = "RGMII (no delay)"; - id_mode_dis = 1; - case PHY_INTERFACE_MODE_RGMII_TXID: - if (!str) - str = "RGMII (TX delay)"; - port_mode = EXT_GPHY; - break; - case PHY_INTERFACE_MODE_MII: - str = "MII"; - port_mode = EXT_EPHY; - break; - case PHY_INTERFACE_MODE_REVMII: - str = "Reverse MII"; - port_mode = EXT_REVMII; - break; - default: - /* All other PHYs: internal and MoCA */ - goto force_link; - } - - /* If the link is down, just disable the interface to conserve power */ - if (!phydev->link) { - reg = reg_readl(priv, REG_RGMII_CNTRL_P(port)); - reg &= ~RGMII_MODE_EN; - reg_writel(priv, reg, REG_RGMII_CNTRL_P(port)); - goto force_link; - } - - /* Clear id_mode_dis bit, and the existing port mode, but - * make sure we enable the RGMII block for data to pass - */ - reg = reg_readl(priv, REG_RGMII_CNTRL_P(port)); - reg &= ~ID_MODE_DIS; - reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT); - reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN); - - reg |= port_mode | RGMII_MODE_EN; - if (id_mode_dis) - reg |= ID_MODE_DIS; - - if (phydev->pause) { - if (phydev->asym_pause) - reg |= TX_PAUSE_EN; - reg |= RX_PAUSE_EN; - } - - reg_writel(priv, reg, REG_RGMII_CNTRL_P(port)); - - pr_info("Port %d configured for %s\n", port, str); - -force_link: - /* Force link settings detected from the PHY */ - reg = SW_OVERRIDE; - switch (phydev->speed) { - case SPEED_1000: - reg |= SPDSTS_1000 << SPEED_SHIFT; - break; - case SPEED_100: - reg |= SPDSTS_100 << SPEED_SHIFT; - break; - } - - if (phydev->link) - reg |= LINK_STS; - if (phydev->duplex == DUPLEX_FULL) - reg |= DUPLX_MODE; - - core_writel(priv, reg, offset); - - if (!phydev->is_pseudo_fixed_link) - p->eee_enabled = b53_eee_init(ds, port, phydev); -} - -static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, - struct fixed_phy_status *status) -{ - struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - u32 duplex, pause, offset; - u32 reg; - - if (priv->type == BCM7445_DEVICE_ID) - offset = CORE_STS_OVERRIDE_GMIIP_PORT(port); - else - offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port); - - duplex = core_readl(priv, CORE_DUPSTS); - pause = core_readl(priv, CORE_PAUSESTS); - - status->link = 0; - - /* MoCA port is special as we do not get link status from CORE_LNKSTS, - * which means that we need to force the link at the port override - * level to get the data to flow. We do use what the interrupt handler - * did determine before. - * - * For the other ports, we just force the link status, since this is - * a fixed PHY device. - */ - if (port == priv->moca_port) { - status->link = priv->port_sts[port].link; - /* For MoCA interfaces, also force a link down notification - * since some version of the user-space daemon (mocad) use - * cmd->autoneg to force the link, which messes up the PHY - * state machine and make it go in PHY_FORCING state instead. - */ - if (!status->link) - netif_carrier_off(ds->ports[port].slave); - status->duplex = 1; - } else { - status->link = 1; - status->duplex = !!(duplex & (1 << port)); - } - - reg = core_readl(priv, offset); - reg |= SW_OVERRIDE; - if (status->link) - reg |= LINK_STS; - else - reg &= ~LINK_STS; - core_writel(priv, reg, offset); - - if ((pause & (1 << port)) && - (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT)))) { - status->asym_pause = 1; - status->pause = 1; - } - - if (pause & (1 << port)) - status->pause = 1; -} - static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port, unsigned long *supported, struct phylink_link_state *state) @@ -1054,8 +907,6 @@ static const struct dsa_switch_ops bcm_sf2_ops = { .get_sset_count = b53_get_sset_count, .get_ethtool_phy_stats = b53_get_ethtool_phy_stats, .get_phy_flags = bcm_sf2_sw_get_phy_flags, - .adjust_link = bcm_sf2_sw_adjust_link, - .fixed_link_update = bcm_sf2_sw_fixed_link_update, .phylink_validate = bcm_sf2_sw_validate, .phylink_mac_config = bcm_sf2_sw_mac_config, .phylink_mac_link_down = bcm_sf2_sw_mac_link_down, -- cgit v1.2.3-59-g8ed1b