From 246d7f773c13cac3e3ab1609fd4ffee520242c63 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 27 Aug 2014 17:04:56 -0700 Subject: net: dsa: add Broadcom SF2 switch driver Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2_regs.h | 227 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100644 drivers/net/dsa/bcm_sf2_regs.h (limited to 'drivers/net/dsa/bcm_sf2_regs.h') diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h new file mode 100644 index 000000000000..885c231b03b5 --- /dev/null +++ b/drivers/net/dsa/bcm_sf2_regs.h @@ -0,0 +1,227 @@ +/* + * Broadcom Starfighter 2 switch register defines + * + * Copyright (C) 2014, Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __BCM_SF2_REGS_H +#define __BCM_SF2_REGS_H + +/* Register set relative to 'REG' */ +#define REG_SWITCH_CNTRL 0x00 +#define MDIO_MASTER_SEL (1 << 0) + +#define REG_SWITCH_STATUS 0x04 +#define REG_DIR_DATA_WRITE 0x08 +#define REG_DIR_DATA_READ 0x0C + +#define REG_SWITCH_REVISION 0x18 +#define SF2_REV_MASK 0xffff +#define SWITCH_TOP_REV_SHIFT 16 +#define SWITCH_TOP_REV_MASK 0xffff + +#define REG_PHY_REVISION 0x1C + +#define REG_SPHY_CNTRL 0x2C +#define IDDQ_BIAS (1 << 0) +#define EXT_PWR_DOWN (1 << 1) +#define FORCE_DLL_EN (1 << 2) +#define IDDQ_GLOBAL_PWR (1 << 3) +#define CK25_DIS (1 << 4) +#define PHY_RESET (1 << 5) +#define PHY_PHYAD_SHIFT 8 +#define PHY_PHYAD_MASK 0x1F + +#define REG_RGMII_0_BASE 0x34 +#define REG_RGMII_CNTRL 0x00 +#define REG_RGMII_IB_STATUS 0x04 +#define REG_RGMII_RX_CLOCK_DELAY_CNTRL 0x08 +#define REG_RGMII_CNTRL_SIZE 0x0C +#define REG_RGMII_CNTRL_P(x) (REG_RGMII_0_BASE + \ + ((x) * REG_RGMII_CNTRL_SIZE)) +/* Relative to REG_RGMII_CNTRL */ +#define RGMII_MODE_EN (1 << 0) +#define ID_MODE_DIS (1 << 1) +#define PORT_MODE_SHIFT 2 +#define INT_EPHY (0 << PORT_MODE_SHIFT) +#define INT_GPHY (1 << PORT_MODE_SHIFT) +#define EXT_EPHY (2 << PORT_MODE_SHIFT) +#define EXT_GPHY (3 << PORT_MODE_SHIFT) +#define EXT_REVMII (4 << PORT_MODE_SHIFT) +#define PORT_MODE_MASK 0x7 +#define RVMII_REF_SEL (1 << 5) +#define RX_PAUSE_EN (1 << 6) +#define TX_PAUSE_EN (1 << 7) +#define TX_CLK_STOP_EN (1 << 8) +#define LPI_COUNT_SHIFT 9 +#define LPI_COUNT_MASK 0x3F + +/* Register set relative to 'INTRL2_0' and 'INTRL2_1' */ +#define INTRL2_CPU_STATUS 0x00 +#define INTRL2_CPU_SET 0x04 +#define INTRL2_CPU_CLEAR 0x08 +#define INTRL2_CPU_MASK_STATUS 0x0c +#define INTRL2_CPU_MASK_SET 0x10 +#define INTRL2_CPU_MASK_CLEAR 0x14 + +/* Shared INTRL2_0 and INTRL2_ interrupt sources macros */ +#define P_LINK_UP_IRQ(x) (1 << (0 + (x))) +#define P_LINK_DOWN_IRQ(x) (1 << (1 + (x))) +#define P_ENERGY_ON_IRQ(x) (1 << (2 + (x))) +#define P_ENERGY_OFF_IRQ(x) (1 << (3 + (x))) +#define P_GPHY_IRQ(x) (1 << (4 + (x))) +#define P_NUM_IRQ 5 +#define P_IRQ_MASK(x) (P_LINK_UP_IRQ((x)) | \ + P_LINK_DOWN_IRQ((x)) | \ + P_ENERGY_ON_IRQ((x)) | \ + P_ENERGY_OFF_IRQ((x)) | \ + P_GPHY_IRQ((x))) + +/* INTRL2_0 interrupt sources */ +#define P0_IRQ_OFF 0 +#define MEM_DOUBLE_IRQ (1 << 5) +#define EEE_LPI_IRQ (1 << 6) +#define P5_CPU_WAKE_IRQ (1 << 7) +#define P8_CPU_WAKE_IRQ (1 << 8) +#define P7_CPU_WAKE_IRQ (1 << 9) +#define IEEE1588_IRQ (1 << 10) +#define MDIO_ERR_IRQ (1 << 11) +#define MDIO_DONE_IRQ (1 << 12) +#define GISB_ERR_IRQ (1 << 13) +#define UBUS_ERR_IRQ (1 << 14) +#define FAILOVER_ON_IRQ (1 << 15) +#define FAILOVER_OFF_IRQ (1 << 16) +#define TCAM_SOFT_ERR_IRQ (1 << 17) + +/* INTRL2_1 interrupt sources */ +#define P7_IRQ_OFF 0 +#define P_IRQ_OFF(x) ((6 - (x)) * P_NUM_IRQ) + +/* Register set relative to 'CORE' */ +#define CORE_G_PCTL_PORT0 0x00000 +#define CORE_G_PCTL_PORT(x) (CORE_G_PCTL_PORT0 + (x * 0x4)) +#define CORE_IMP_CTL 0x00020 +#define RX_DIS (1 << 0) +#define TX_DIS (1 << 1) +#define RX_BCST_EN (1 << 2) +#define RX_MCST_EN (1 << 3) +#define RX_UCST_EN (1 << 4) +#define G_MISTP_STATE_SHIFT 5 +#define G_MISTP_NO_STP (0 << G_MISTP_STATE_SHIFT) +#define G_MISTP_DIS_STATE (1 << G_MISTP_STATE_SHIFT) +#define G_MISTP_BLOCK_STATE (2 << G_MISTP_STATE_SHIFT) +#define G_MISTP_LISTEN_STATE (3 << G_MISTP_STATE_SHIFT) +#define G_MISTP_LEARN_STATE (4 << G_MISTP_STATE_SHIFT) +#define G_MISTP_FWD_STATE (5 << G_MISTP_STATE_SHIFT) +#define G_MISTP_STATE_MASK 0x7 + +#define CORE_SWMODE 0x0002c +#define SW_FWDG_MODE (1 << 0) +#define SW_FWDG_EN (1 << 1) +#define RTRY_LMT_DIS (1 << 2) + +#define CORE_STS_OVERRIDE_IMP 0x00038 +#define GMII_SPEED_UP_2G (1 << 6) +#define MII_SW_OR (1 << 7) + +#define CORE_NEW_CTRL 0x00084 +#define IP_MC (1 << 0) +#define OUTRANGEERR_DISCARD (1 << 1) +#define INRANGEERR_DISCARD (1 << 2) +#define CABLE_DIAG_LEN (1 << 3) +#define OVERRIDE_AUTO_PD_WAR (1 << 4) +#define EN_AUTO_PD_WAR (1 << 5) +#define UC_FWD_EN (1 << 6) +#define MC_FWD_EN (1 << 7) + +#define CORE_SWITCH_CTRL 0x00088 +#define MII_DUMB_FWDG_EN (1 << 6) + +#define CORE_SFT_LRN_CTRL 0x000f8 +#define SW_LEARN_CNTL(x) (1 << (x)) + +#define CORE_STS_OVERRIDE_GMIIP_PORT(x) (0x160 + (x) * 4) +#define LINK_STS (1 << 0) +#define DUPLX_MODE (1 << 1) +#define SPEED_SHIFT 2 +#define SPEED_MASK 0x3 +#define RXFLOW_CNTL (1 << 4) +#define TXFLOW_CNTL (1 << 5) +#define SW_OVERRIDE (1 << 6) + +#define CORE_WATCHDOG_CTRL 0x001e4 +#define SOFTWARE_RESET (1 << 7) +#define EN_CHIP_RST (1 << 6) +#define EN_SW_RESET (1 << 4) + +#define CORE_LNKSTS 0x00400 +#define LNK_STS_MASK 0x1ff + +#define CORE_SPDSTS 0x00410 +#define SPDSTS_10 0 +#define SPDSTS_100 1 +#define SPDSTS_1000 2 +#define SPDSTS_SHIFT 2 +#define SPDSTS_MASK 0x3 + +#define CORE_DUPSTS 0x00420 +#define CORE_DUPSTS_MASK 0x1ff + +#define CORE_PAUSESTS 0x00428 +#define PAUSESTS_TX_PAUSE_SHIFT 9 + +#define CORE_GMNCFGCFG 0x0800 +#define RST_MIB_CNT (1 << 0) +#define RXBPDU_EN (1 << 1) + +#define CORE_IMP0_PRT_ID 0x0804 + +#define CORE_BRCM_HDR_CTRL 0x0080c +#define BRCM_HDR_EN_P8 (1 << 0) +#define BRCM_HDR_EN_P5 (1 << 1) +#define BRCM_HDR_EN_P7 (1 << 2) + +#define CORE_BRCM_HDR_CTRL2 0x0828 + +#define CORE_HL_PRTC_CTRL 0x0940 +#define ARP_EN (1 << 0) +#define RARP_EN (1 << 1) +#define DHCP_EN (1 << 2) +#define ICMPV4_EN (1 << 3) +#define ICMPV6_EN (1 << 4) +#define ICMPV6_FWD_MODE (1 << 5) +#define IGMP_DIP_EN (1 << 8) +#define IGMP_RPTLVE_EN (1 << 9) +#define IGMP_RTPLVE_FWD_MODE (1 << 10) +#define IGMP_QRY_EN (1 << 11) +#define IGMP_QRY_FWD_MODE (1 << 12) +#define IGMP_UKN_EN (1 << 13) +#define IGMP_UKN_FWD_MODE (1 << 14) +#define MLD_RPTDONE_EN (1 << 15) +#define MLD_RPTDONE_FWD_MODE (1 << 16) +#define MLD_QRY_EN (1 << 17) +#define MLD_QRY_FWD_MODE (1 << 18) + +#define CORE_RST_MIB_CNT_EN 0x0950 + +#define CORE_BRCM_HDR_RX_DIS 0x0980 +#define CORE_BRCM_HDR_TX_DIS 0x0988 + +#define CORE_MEM_PSM_VDD_CTRL 0x2380 +#define P_TXQ_PSM_VDD_SHIFT 2 +#define P_TXQ_PSM_VDD_MASK 0x3 +#define P_TXQ_PSM_VDD(x) (P_TXQ_PSM_VDD_MASK << \ + ((x) * P_TXQ_PSM_VDD_SHIFT)) + +#define CORE_P0_MIB_OFFSET 0x8000 +#define P_MIB_SIZE 0x400 +#define CORE_P_MIB_OFFSET(x) (CORE_P0_MIB_OFFSET + (x) * P_MIB_SIZE) + +#define CORE_PORT_VLAN_CTL_PORT(x) (0xc400 + ((x) * 0x8)) +#define PORT_VLAN_CTRL_MASK 0x1ff + +#endif /* __BCM_SF2_REGS_H */ -- cgit v1.2.3-59-g8ed1b