From 54fa49ee88138756df0fcf867cb1849904710a8c Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Fri, 27 Dec 2019 03:11:13 +0200 Subject: net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S For first-generation switches (SJA1105E and SJA1105T): - TPID means C-Tag (typically 0x8100) - TPID2 means S-Tag (typically 0x88A8) While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around: - TPID means S-Tag (typically 0x88A8) - TPID2 means C-Tag (typically 0x8100) In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2. So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T. We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf). Fixes: f9a1a7646c0d ("net: dsa: sja1105: Reverse TPID and TPID2") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/dsa/sja1105/sja1105_main.c') diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 86bbab166633..1da5ac111499 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1569,8 +1569,8 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled) if (enabled) { /* Enable VLAN filtering. */ - tpid = ETH_P_8021AD; - tpid2 = ETH_P_8021Q; + tpid = ETH_P_8021Q; + tpid2 = ETH_P_8021AD; } else { /* Disable VLAN filtering. */ tpid = ETH_P_SJA1105; @@ -1579,9 +1579,9 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled) table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; general_params = table->entries; - /* EtherType used to identify outer tagged (S-tag) VLAN traffic */ - general_params->tpid = tpid; /* EtherType used to identify inner tagged (C-tag) VLAN traffic */ + general_params->tpid = tpid; + /* EtherType used to identify outer tagged (S-tag) VLAN traffic */ general_params->tpid2 = tpid2; /* When VLAN filtering is on, we need to at least be able to * decode management traffic through the "backup plan". -- cgit v1.2.3-59-g8ed1b