From 1f1c7a5c1dca01dd8f3f740420f92c7d1d2ae080 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 16 Jan 2013 19:32:34 -0500 Subject: drivers/net: delete old DEC depca ISA drivers support. These are old ISA 10Mbit cards from the 1st 1/2 of the 1990s and required manual jumper settings in order to configure them. Here we remove them on the premise that they are no longer used in any modern 3.9+ kernels. Signed-off-by: Paul Gortmaker --- drivers/net/ethernet/amd/depca.h | 183 --------------------------------------- 1 file changed, 183 deletions(-) delete mode 100644 drivers/net/ethernet/amd/depca.h (limited to 'drivers/net/ethernet/amd/depca.h') diff --git a/drivers/net/ethernet/amd/depca.h b/drivers/net/ethernet/amd/depca.h deleted file mode 100644 index cdcfe4252c16..000000000000 --- a/drivers/net/ethernet/amd/depca.h +++ /dev/null @@ -1,183 +0,0 @@ -/* - Written 1994 by David C. Davies. - - Copyright 1994 David C. Davies. This software may be used and distributed - according to the terms of the GNU General Public License, incorporated herein by - reference. -*/ - -/* -** I/O addresses. Note that the 2k buffer option is not supported in -** this driver. -*/ -#define DEPCA_NICSR ioaddr+0x00 /* Network interface CSR */ -#define DEPCA_RBI ioaddr+0x02 /* RAM buffer index (2k buffer mode) */ -#define DEPCA_DATA ioaddr+0x04 /* LANCE registers' data port */ -#define DEPCA_ADDR ioaddr+0x06 /* LANCE registers' address port */ -#define DEPCA_HBASE ioaddr+0x08 /* EISA high memory base address reg. */ -#define DEPCA_PROM ioaddr+0x0c /* Ethernet address ROM data port */ -#define DEPCA_CNFG ioaddr+0x0c /* EISA Configuration port */ -#define DEPCA_RBSA ioaddr+0x0e /* RAM buffer starting address (2k buff.) */ - -/* -** These are LANCE registers addressable through DEPCA_ADDR -*/ -#define CSR0 0 -#define CSR1 1 -#define CSR2 2 -#define CSR3 3 - -/* -** NETWORK INTERFACE CSR (NI_CSR) bit definitions -*/ - -#define TO 0x0100 /* Time Out for remote boot */ -#define SHE 0x0080 /* SHadow memory Enable */ -#define BS 0x0040 /* Bank Select */ -#define BUF 0x0020 /* BUFfer size (1->32k, 0->64k) */ -#define RBE 0x0010 /* Remote Boot Enable (1->net boot) */ -#define AAC 0x0008 /* Address ROM Address Counter (1->enable) */ -#define _128KB 0x0008 /* 128kB Network RAM (1->enable) */ -#define IM 0x0004 /* Interrupt Mask (1->mask) */ -#define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */ -#define LED 0x0001 /* LED control */ - -/* -** Control and Status Register 0 (CSR0) bit definitions -*/ - -#define ERR 0x8000 /* Error summary */ -#define BABL 0x4000 /* Babble transmitter timeout error */ -#define CERR 0x2000 /* Collision Error */ -#define MISS 0x1000 /* Missed packet */ -#define MERR 0x0800 /* Memory Error */ -#define RINT 0x0400 /* Receiver Interrupt */ -#define TINT 0x0200 /* Transmit Interrupt */ -#define IDON 0x0100 /* Initialization Done */ -#define INTR 0x0080 /* Interrupt Flag */ -#define INEA 0x0040 /* Interrupt Enable */ -#define RXON 0x0020 /* Receiver on */ -#define TXON 0x0010 /* Transmitter on */ -#define TDMD 0x0008 /* Transmit Demand */ -#define STOP 0x0004 /* Stop */ -#define STRT 0x0002 /* Start */ -#define INIT 0x0001 /* Initialize */ -#define INTM 0xff00 /* Interrupt Mask */ -#define INTE 0xfff0 /* Interrupt Enable */ - -/* -** CONTROL AND STATUS REGISTER 3 (CSR3) -*/ - -#define BSWP 0x0004 /* Byte SWaP */ -#define ACON 0x0002 /* ALE control */ -#define BCON 0x0001 /* Byte CONtrol */ - -/* -** Initialization Block Mode Register -*/ - -#define PROM 0x8000 /* Promiscuous Mode */ -#define EMBA 0x0080 /* Enable Modified Back-off Algorithm */ -#define INTL 0x0040 /* Internal Loopback */ -#define DRTY 0x0020 /* Disable Retry */ -#define COLL 0x0010 /* Force Collision */ -#define DTCR 0x0008 /* Disable Transmit CRC */ -#define LOOP 0x0004 /* Loopback */ -#define DTX 0x0002 /* Disable the Transmitter */ -#define DRX 0x0001 /* Disable the Receiver */ - -/* -** Receive Message Descriptor 1 (RMD1) bit definitions. -*/ - -#define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ -#define R_ERR 0x4000 /* Error Summary */ -#define R_FRAM 0x2000 /* Framing Error */ -#define R_OFLO 0x1000 /* Overflow Error */ -#define R_CRC 0x0800 /* CRC Error */ -#define R_BUFF 0x0400 /* Buffer Error */ -#define R_STP 0x0200 /* Start of Packet */ -#define R_ENP 0x0100 /* End of Packet */ - -/* -** Transmit Message Descriptor 1 (TMD1) bit definitions. -*/ - -#define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ -#define T_ERR 0x4000 /* Error Summary */ -#define T_ADD_FCS 0x2000 /* More the 1 retry needed to Xmit */ -#define T_MORE 0x1000 /* >1 retry to transmit packet */ -#define T_ONE 0x0800 /* 1 try needed to transmit the packet */ -#define T_DEF 0x0400 /* Deferred */ -#define T_STP 0x02000000 /* Start of Packet */ -#define T_ENP 0x01000000 /* End of Packet */ -#define T_FLAGS 0xff000000 /* TX Flags Field */ - -/* -** Transmit Message Descriptor 3 (TMD3) bit definitions. -*/ - -#define TMD3_BUFF 0x8000 /* BUFFer error */ -#define TMD3_UFLO 0x4000 /* UnderFLOw error */ -#define TMD3_RES 0x2000 /* REServed */ -#define TMD3_LCOL 0x1000 /* Late COLlision */ -#define TMD3_LCAR 0x0800 /* Loss of CARrier */ -#define TMD3_RTRY 0x0400 /* ReTRY error */ - -/* -** EISA configuration Register (CNFG) bit definitions -*/ - -#define TIMEOUT 0x0100 /* 0:2.5 mins, 1: 30 secs */ -#define REMOTE 0x0080 /* Remote Boot Enable -> 1 */ -#define IRQ11 0x0040 /* Enable -> 1 */ -#define IRQ10 0x0020 /* Enable -> 1 */ -#define IRQ9 0x0010 /* Enable -> 1 */ -#define IRQ5 0x0008 /* Enable -> 1 */ -#define BUFF 0x0004 /* 0: 64kB or 128kB, 1: 32kB */ -#define PADR16 0x0002 /* RAM on 64kB boundary */ -#define PADR17 0x0001 /* RAM on 128kB boundary */ - -/* -** Miscellaneous -*/ -#define HASH_TABLE_LEN 64 /* Bits */ -#define HASH_BITS 0x003f /* 6 LS bits */ - -#define MASK_INTERRUPTS 1 -#define UNMASK_INTERRUPTS 0 - -#define EISA_EN 0x0001 /* Enable EISA bus buffers */ -#define EISA_ID iobase+0x0080 /* ID long word for EISA card */ -#define EISA_CTRL iobase+0x0084 /* Control word for EISA card */ - -/* -** Include the IOCTL stuff -*/ -#include - -struct depca_ioctl { - unsigned short cmd; /* Command to run */ - unsigned short len; /* Length of the data buffer */ - unsigned char __user *data; /* Pointer to the data buffer */ -}; - -/* -** Recognised commands for the driver -*/ -#define DEPCA_GET_HWADDR 0x01 /* Get the hardware address */ -#define DEPCA_SET_HWADDR 0x02 /* Get the hardware address */ -#define DEPCA_SET_PROM 0x03 /* Set Promiscuous Mode */ -#define DEPCA_CLR_PROM 0x04 /* Clear Promiscuous Mode */ -#define DEPCA_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ -#define DEPCA_GET_MCA 0x06 /* Get a multicast address */ -#define DEPCA_SET_MCA 0x07 /* Set a multicast address */ -#define DEPCA_CLR_MCA 0x08 /* Clear a multicast address */ -#define DEPCA_MCA_EN 0x09 /* Enable a multicast address group */ -#define DEPCA_GET_STATS 0x0a /* Get the driver statistics */ -#define DEPCA_CLR_STATS 0x0b /* Zero out the driver statistics */ -#define DEPCA_GET_REG 0x0c /* Get the Register contents */ -#define DEPCA_SET_REG 0x0d /* Set the Register contents */ -#define DEPCA_DUMP 0x0f /* Dump the DEPCA Status */ - -- cgit v1.2.3-59-g8ed1b