From b955f6ca776f3bab3d1e2c5fb1d247b203cbda14 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Wed, 30 Mar 2011 07:46:36 -0700 Subject: amd: Move AMD (Lance) chipset drivers Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/ and the necessary Kconfig and Makfile changes. The au1000 (Alchemy) driver was also moved into the same directory even though it is not a "Lance" driver. CC: Peter Maydell CC: Roman Hodek CC: "Maciej W. Rozycki" CC: Donald Becker CC: Sam Creasey CC: Miguel de Icaza CC: Thomas Bogendoerfer CC: Don Fry CC: Geert Uytterhoeven CC: Russell King CC: David Davies CC: "M.Hipp" CC: Pete Popov CC: David Hinds CC: "Roger C. Pao" Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/amd/depca.h | 185 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 185 insertions(+) create mode 100644 drivers/net/ethernet/amd/depca.h (limited to 'drivers/net/ethernet/amd/depca.h') diff --git a/drivers/net/ethernet/amd/depca.h b/drivers/net/ethernet/amd/depca.h new file mode 100644 index 000000000000..ee42648dbde6 --- /dev/null +++ b/drivers/net/ethernet/amd/depca.h @@ -0,0 +1,185 @@ +/* + Written 1994 by David C. Davies. + + Copyright 1994 David C. Davies. This software may be used and distributed + according to the terms of the GNU General Public License, incorporated herein by + reference. +*/ + +/* +** I/O addresses. Note that the 2k buffer option is not supported in +** this driver. +*/ +#define DEPCA_NICSR ioaddr+0x00 /* Network interface CSR */ +#define DEPCA_RBI ioaddr+0x02 /* RAM buffer index (2k buffer mode) */ +#define DEPCA_DATA ioaddr+0x04 /* LANCE registers' data port */ +#define DEPCA_ADDR ioaddr+0x06 /* LANCE registers' address port */ +#define DEPCA_HBASE ioaddr+0x08 /* EISA high memory base address reg. */ +#define DEPCA_PROM ioaddr+0x0c /* Ethernet address ROM data port */ +#define DEPCA_CNFG ioaddr+0x0c /* EISA Configuration port */ +#define DEPCA_RBSA ioaddr+0x0e /* RAM buffer starting address (2k buff.) */ + +/* +** These are LANCE registers addressable through DEPCA_ADDR +*/ +#define CSR0 0 +#define CSR1 1 +#define CSR2 2 +#define CSR3 3 + +/* +** NETWORK INTERFACE CSR (NI_CSR) bit definitions +*/ + +#define TO 0x0100 /* Time Out for remote boot */ +#define SHE 0x0080 /* SHadow memory Enable */ +#define BS 0x0040 /* Bank Select */ +#define BUF 0x0020 /* BUFfer size (1->32k, 0->64k) */ +#define RBE 0x0010 /* Remote Boot Enable (1->net boot) */ +#define AAC 0x0008 /* Address ROM Address Counter (1->enable) */ +#define _128KB 0x0008 /* 128kB Network RAM (1->enable) */ +#define IM 0x0004 /* Interrupt Mask (1->mask) */ +#define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */ +#define LED 0x0001 /* LED control */ + +/* +** Control and Status Register 0 (CSR0) bit definitions +*/ + +#define ERR 0x8000 /* Error summary */ +#define BABL 0x4000 /* Babble transmitter timeout error */ +#define CERR 0x2000 /* Collision Error */ +#define MISS 0x1000 /* Missed packet */ +#define MERR 0x0800 /* Memory Error */ +#define RINT 0x0400 /* Receiver Interrupt */ +#define TINT 0x0200 /* Transmit Interrupt */ +#define IDON 0x0100 /* Initialization Done */ +#define INTR 0x0080 /* Interrupt Flag */ +#define INEA 0x0040 /* Interrupt Enable */ +#define RXON 0x0020 /* Receiver on */ +#define TXON 0x0010 /* Transmitter on */ +#define TDMD 0x0008 /* Transmit Demand */ +#define STOP 0x0004 /* Stop */ +#define STRT 0x0002 /* Start */ +#define INIT 0x0001 /* Initialize */ +#define INTM 0xff00 /* Interrupt Mask */ +#define INTE 0xfff0 /* Interrupt Enable */ + +/* +** CONTROL AND STATUS REGISTER 3 (CSR3) +*/ + +#define BSWP 0x0004 /* Byte SWaP */ +#define ACON 0x0002 /* ALE control */ +#define BCON 0x0001 /* Byte CONtrol */ + +/* +** Initialization Block Mode Register +*/ + +#define PROM 0x8000 /* Promiscuous Mode */ +#define EMBA 0x0080 /* Enable Modified Back-off Algorithm */ +#define INTL 0x0040 /* Internal Loopback */ +#define DRTY 0x0020 /* Disable Retry */ +#define COLL 0x0010 /* Force Collision */ +#define DTCR 0x0008 /* Disable Transmit CRC */ +#define LOOP 0x0004 /* Loopback */ +#define DTX 0x0002 /* Disable the Transmitter */ +#define DRX 0x0001 /* Disable the Receiver */ + +/* +** Receive Message Descriptor 1 (RMD1) bit definitions. +*/ + +#define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ +#define R_ERR 0x4000 /* Error Summary */ +#define R_FRAM 0x2000 /* Framing Error */ +#define R_OFLO 0x1000 /* Overflow Error */ +#define R_CRC 0x0800 /* CRC Error */ +#define R_BUFF 0x0400 /* Buffer Error */ +#define R_STP 0x0200 /* Start of Packet */ +#define R_ENP 0x0100 /* End of Packet */ + +/* +** Transmit Message Descriptor 1 (TMD1) bit definitions. +*/ + +#define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ +#define T_ERR 0x4000 /* Error Summary */ +#define T_ADD_FCS 0x2000 /* More the 1 retry needed to Xmit */ +#define T_MORE 0x1000 /* >1 retry to transmit packet */ +#define T_ONE 0x0800 /* 1 try needed to transmit the packet */ +#define T_DEF 0x0400 /* Deferred */ +#define T_STP 0x02000000 /* Start of Packet */ +#define T_ENP 0x01000000 /* End of Packet */ +#define T_FLAGS 0xff000000 /* TX Flags Field */ + +/* +** Transmit Message Descriptor 3 (TMD3) bit definitions. +*/ + +#define TMD3_BUFF 0x8000 /* BUFFer error */ +#define TMD3_UFLO 0x4000 /* UnderFLOw error */ +#define TMD3_RES 0x2000 /* REServed */ +#define TMD3_LCOL 0x1000 /* Late COLlision */ +#define TMD3_LCAR 0x0800 /* Loss of CARrier */ +#define TMD3_RTRY 0x0400 /* ReTRY error */ + +/* +** EISA configuration Register (CNFG) bit definitions +*/ + +#define TIMEOUT 0x0100 /* 0:2.5 mins, 1: 30 secs */ +#define REMOTE 0x0080 /* Remote Boot Enable -> 1 */ +#define IRQ11 0x0040 /* Enable -> 1 */ +#define IRQ10 0x0020 /* Enable -> 1 */ +#define IRQ9 0x0010 /* Enable -> 1 */ +#define IRQ5 0x0008 /* Enable -> 1 */ +#define BUFF 0x0004 /* 0: 64kB or 128kB, 1: 32kB */ +#define PADR16 0x0002 /* RAM on 64kB boundary */ +#define PADR17 0x0001 /* RAM on 128kB boundary */ + +/* +** Miscellaneous +*/ +#define HASH_TABLE_LEN 64 /* Bits */ +#define HASH_BITS 0x003f /* 6 LS bits */ + +#define MASK_INTERRUPTS 1 +#define UNMASK_INTERRUPTS 0 + +#define EISA_EN 0x0001 /* Enable EISA bus buffers */ +#define EISA_ID iobase+0x0080 /* ID long word for EISA card */ +#define EISA_CTRL iobase+0x0084 /* Control word for EISA card */ + +/* +** Include the IOCTL stuff +*/ +#include + +#define DEPCAIOCTL SIOCDEVPRIVATE + +struct depca_ioctl { + unsigned short cmd; /* Command to run */ + unsigned short len; /* Length of the data buffer */ + unsigned char __user *data; /* Pointer to the data buffer */ +}; + +/* +** Recognised commands for the driver +*/ +#define DEPCA_GET_HWADDR 0x01 /* Get the hardware address */ +#define DEPCA_SET_HWADDR 0x02 /* Get the hardware address */ +#define DEPCA_SET_PROM 0x03 /* Set Promiscuous Mode */ +#define DEPCA_CLR_PROM 0x04 /* Clear Promiscuous Mode */ +#define DEPCA_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ +#define DEPCA_GET_MCA 0x06 /* Get a multicast address */ +#define DEPCA_SET_MCA 0x07 /* Set a multicast address */ +#define DEPCA_CLR_MCA 0x08 /* Clear a multicast address */ +#define DEPCA_MCA_EN 0x09 /* Enable a multicast address group */ +#define DEPCA_GET_STATS 0x0a /* Get the driver statistics */ +#define DEPCA_CLR_STATS 0x0b /* Zero out the driver statistics */ +#define DEPCA_GET_REG 0x0c /* Get the Register contents */ +#define DEPCA_SET_REG 0x0d /* Set the Register contents */ +#define DEPCA_DUMP 0x0f /* Dump the DEPCA Status */ + -- cgit v1.2.3-59-g8ed1b