From b955f6ca776f3bab3d1e2c5fb1d247b203cbda14 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Wed, 30 Mar 2011 07:46:36 -0700 Subject: amd: Move AMD (Lance) chipset drivers Moves the drivers for the AMD chipsets into drivers/net/ethernet/amd/ and the necessary Kconfig and Makfile changes. The au1000 (Alchemy) driver was also moved into the same directory even though it is not a "Lance" driver. CC: Peter Maydell CC: Roman Hodek CC: "Maciej W. Rozycki" CC: Donald Becker CC: Sam Creasey CC: Miguel de Icaza CC: Thomas Bogendoerfer CC: Don Fry CC: Geert Uytterhoeven CC: Russell King CC: David Davies CC: "M.Hipp" CC: Pete Popov CC: David Hinds CC: "Roger C. Pao" Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/amd/hplance.c | 242 +++++++++++++++++++++++++++++++++++++ 1 file changed, 242 insertions(+) create mode 100644 drivers/net/ethernet/amd/hplance.c (limited to 'drivers/net/ethernet/amd/hplance.c') diff --git a/drivers/net/ethernet/amd/hplance.c b/drivers/net/ethernet/amd/hplance.c new file mode 100644 index 000000000000..a900d5bf2948 --- /dev/null +++ b/drivers/net/ethernet/amd/hplance.c @@ -0,0 +1,242 @@ +/* hplance.c : the Linux/hp300/lance ethernet driver + * + * Copyright (C) 05/1998 Peter Maydell + * Based on the Sun Lance driver and the NetBSD HP Lance driver + * Uses the generic 7990.c LANCE code. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +/* Used for the temporal inet entries and routing */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "hplance.h" + +/* We have 16834 bytes of RAM for the init block and buffers. This places + * an upper limit on the number of buffers we can use. NetBSD uses 8 Rx + * buffers and 2 Tx buffers. + */ +#define LANCE_LOG_TX_BUFFERS 1 +#define LANCE_LOG_RX_BUFFERS 3 + +#include "7990.h" /* use generic LANCE code */ + +/* Our private data structure */ +struct hplance_private { + struct lance_private lance; +}; + +/* function prototypes... This is easy because all the grot is in the + * generic LANCE support. All we have to support is probing for boards, + * plus board-specific init, open and close actions. + * Oh, and we need to tell the generic code how to read and write LANCE registers... + */ +static int __devinit hplance_init_one(struct dio_dev *d, + const struct dio_device_id *ent); +static void __devinit hplance_init(struct net_device *dev, + struct dio_dev *d); +static void __devexit hplance_remove_one(struct dio_dev *d); +static void hplance_writerap(void *priv, unsigned short value); +static void hplance_writerdp(void *priv, unsigned short value); +static unsigned short hplance_readrdp(void *priv); +static int hplance_open(struct net_device *dev); +static int hplance_close(struct net_device *dev); + +static struct dio_device_id hplance_dio_tbl[] = { + { DIO_ID_LAN }, + { 0 } +}; + +static struct dio_driver hplance_driver = { + .name = "hplance", + .id_table = hplance_dio_tbl, + .probe = hplance_init_one, + .remove = __devexit_p(hplance_remove_one), +}; + +static const struct net_device_ops hplance_netdev_ops = { + .ndo_open = hplance_open, + .ndo_stop = hplance_close, + .ndo_start_xmit = lance_start_xmit, + .ndo_set_multicast_list = lance_set_multicast, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = lance_poll, +#endif +}; + +/* Find all the HP Lance boards and initialise them... */ +static int __devinit hplance_init_one(struct dio_dev *d, + const struct dio_device_id *ent) +{ + struct net_device *dev; + int err = -ENOMEM; + int i; + + dev = alloc_etherdev(sizeof(struct hplance_private)); + if (!dev) + goto out; + + err = -EBUSY; + if (!request_mem_region(dio_resource_start(d), + dio_resource_len(d), d->name)) + goto out_free_netdev; + + hplance_init(dev, d); + err = register_netdev(dev); + if (err) + goto out_release_mem_region; + + dio_set_drvdata(d, dev); + + printk(KERN_INFO "%s: %s; select code %d, addr %2.2x", dev->name, d->name, d->scode, dev->dev_addr[0]); + + for (i=1; i<6; i++) { + printk(":%2.2x", dev->dev_addr[i]); + } + + printk(", irq %d\n", d->ipl); + + return 0; + + out_release_mem_region: + release_mem_region(dio_resource_start(d), dio_resource_len(d)); + out_free_netdev: + free_netdev(dev); + out: + return err; +} + +static void __devexit hplance_remove_one(struct dio_dev *d) +{ + struct net_device *dev = dio_get_drvdata(d); + + unregister_netdev(dev); + release_mem_region(dio_resource_start(d), dio_resource_len(d)); + free_netdev(dev); +} + +/* Initialise a single lance board at the given DIO device */ +static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d) +{ + unsigned long va = (d->resource.start + DIO_VIRADDRBASE); + struct hplance_private *lp; + int i; + + /* reset the board */ + out_8(va+DIO_IDOFF, 0xff); + udelay(100); /* ariba! ariba! udelay! udelay! */ + + /* Fill the dev fields */ + dev->base_addr = va; + dev->netdev_ops = &hplance_netdev_ops; + dev->dma = 0; + + for (i=0; i<6; i++) { + /* The NVRAM holds our ethernet address, one nibble per byte, + * at bytes NVRAMOFF+1,3,5,7,9... + */ + dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4) + | (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF); + } + + lp = netdev_priv(dev); + lp->lance.name = (char*)d->name; /* discards const, shut up gcc */ + lp->lance.base = va; + lp->lance.init_block = (struct lance_init_block *)(va + HPLANCE_MEMOFF); /* CPU addr */ + lp->lance.lance_init_block = NULL; /* LANCE addr of same RAM */ + lp->lance.busmaster_regval = LE_C3_BSWP; /* we're bigendian */ + lp->lance.irq = d->ipl; + lp->lance.writerap = hplance_writerap; + lp->lance.writerdp = hplance_writerdp; + lp->lance.readrdp = hplance_readrdp; + lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS; + lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS; + lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK; + lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK; +} + +/* This is disgusting. We have to check the DIO status register for ack every + * time we read or write the LANCE registers. + */ +static void hplance_writerap(void *priv, unsigned short value) +{ + struct lance_private *lp = (struct lance_private *)priv; + do { + out_be16(lp->base + HPLANCE_REGOFF + LANCE_RAP, value); + } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0); +} + +static void hplance_writerdp(void *priv, unsigned short value) +{ + struct lance_private *lp = (struct lance_private *)priv; + do { + out_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP, value); + } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0); +} + +static unsigned short hplance_readrdp(void *priv) +{ + struct lance_private *lp = (struct lance_private *)priv; + __u16 value; + do { + value = in_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP); + } while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0); + return value; +} + +static int hplance_open(struct net_device *dev) +{ + int status; + struct lance_private *lp = netdev_priv(dev); + + status = lance_open(dev); /* call generic lance open code */ + if (status) + return status; + /* enable interrupts at board level. */ + out_8(lp->base + HPLANCE_STATUS, LE_IE); + + return 0; +} + +static int hplance_close(struct net_device *dev) +{ + struct lance_private *lp = netdev_priv(dev); + + out_8(lp->base + HPLANCE_STATUS, 0); /* disable interrupts at boardlevel */ + lance_close(dev); + return 0; +} + +static int __init hplance_init_module(void) +{ + return dio_register_driver(&hplance_driver); +} + +static void __exit hplance_cleanup_module(void) +{ + dio_unregister_driver(&hplance_driver); +} + +module_init(hplance_init_module); +module_exit(hplance_cleanup_module); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3-59-g8ed1b